diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
23 files changed, 335 insertions, 173 deletions
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml index 66cb238a1040..ad21899981af 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX23 maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml index 72328d5ca09a..f1af1108129e 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX28 maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml index ccf5b50e798b..dfa1133f8c5e 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS GPIO controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> - Anson Huang <Anson.Huang@nxp.com> description: | diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml index d3134ed775fa..21ae7bce038e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS Inter IC (I2C) Controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt deleted file mode 100644 index 7841cb099e13..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt +++ /dev/null @@ -1,66 +0,0 @@ -Texas Instruments K3 Interrupt Aggregator -========================================= - -The Interrupt Aggregator (INTA) provides a centralized machine -which handles the termination of system events to that they can -be coherently processed by the host(s) in the system. A maximum -of 64 events can be mapped to a single interrupt. - - - Interrupt Aggregator - +-----------------------------------------+ - | Intmap VINT | - | +--------------+ +------------+ | - m ------>| | vint | bit | | 0 |.....|63| vint0 | - . | +--------------+ +------------+ | +------+ - . | . . | | HOST | -Globalevents ------>| . . |------>| IRQ | - . | . . | | CTRL | - . | . . | +------+ - n ------>| +--------------+ +------------+ | - | | vint | bit | | 0 |.....|63| vintx | - | +--------------+ +------------+ | - | | - +-----------------------------------------+ - -Configuration of these Intmap registers that maps global events to vint is done -by a system controller (like the Device Memory and Security Controller on K3 -AM654 SoC). Driver should request the system controller to get the range -of global events and vints assigned to the requesting host. Management -of these requested resources should be handled by driver and requests -system controller to map specific global event to vint, bit pair. - -Communication between the host processor running an OS and the system -controller happens through a protocol called TI System Control Interface -(TISCI protocol). For more details refer: -Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -TISCI Interrupt Aggregator Node: -------------------------------- -- compatible: Must be "ti,sci-inta". -- reg: Should contain registers location and length. -- interrupt-controller: Identifies the node as an interrupt controller -- msi-controller: Identifies the node as an MSI controller. -- interrupt-parent: phandle of irq parent. -- ti,sci: Phandle to TI-SCI compatible System controller node. -- ti,sci-dev-id: TISCI device ID of the Interrupt Aggregator. -- ti,sci-rm-range-vint: Array of TISCI subtype ids representing vints(inta - outputs) range within this INTA, assigned to the - requesting host context. -- ti,sci-rm-range-global-event: Array of TISCI subtype ids representing the - global events range reaching this IA and are assigned - to the requesting host context. - -Example: --------- -main_udmass_inta: interrupt-controller@33d00000 { - compatible = "ti,sci-inta"; - reg = <0x0 0x33d00000 0x0 0x100000>; - interrupt-controller; - msi-controller; - interrupt-parent = <&main_navss_intr>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <179>; - ti,sci-rm-range-vint = <0x0>; - ti,sci-rm-range-global-event = <0x1>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml new file mode 100644 index 000000000000..c7cd05656a3e --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Aggregator + +maintainers: + - Lokesh Vutla <lokeshvutla@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Aggregator (INTA) provides a centralized machine + which handles the termination of system events to that they can + be coherently processed by the host(s) in the system. A maximum + of 64 events can be mapped to a single interrupt. + + Interrupt Aggregator + +-----------------------------------------+ + | Intmap VINT | + | +--------------+ +------------+ | + m ------>| | vint | bit | | 0 |.....|63| vint0 | + . | +--------------+ +------------+ | +------+ + . | . . | | HOST | + Globalevents ------>| . . |----->| IRQ | + . | . . | | CTRL | + . | . . | +------+ + n ------>| +--------------+ +------------+ | + | | vint | bit | | 0 |.....|63| vintx | + | +--------------+ +------------+ | + | | + +-----------------------------------------+ + + Configuration of these Intmap registers that maps global events to vint is + done by a system controller (like the Device Memory and Security Controller + on AM654 SoC). Driver should request the system controller to get the range + of global events and vints assigned to the requesting host. Management + of these requested resources should be handled by driver and requests + system controller to map specific global event to vint, bit pair. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-inta + + reg: + maxItems: 1 + + interrupt-controller: true + + msi-controller: true + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTA output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for inta output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + main_udmass_inta: msi-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + interrupt-parent = <&main_navss_intr>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <179>; + ti,interrupt-ranges = <0 0 256>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt deleted file mode 100644 index 178fca08278f..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt +++ /dev/null @@ -1,82 +0,0 @@ -Texas Instruments K3 Interrupt Router -===================================== - -The Interrupt Router (INTR) module provides a mechanism to mux M -interrupt inputs to N interrupt outputs, where all M inputs are selectable -to be driven per N output. An Interrupt Router can either handle edge triggered -or level triggered interrupts and that is fixed in hardware. - - Interrupt Router - +----------------------+ - | Inputs Outputs | - +-------+ | +------+ +-----+ | - | GPIO |----------->| | irq0 | | 0 | | Host IRQ - +-------+ | +------+ +-----+ | controller - | . . | +-------+ - +-------+ | . . |----->| IRQ | - | INTA |----------->| . . | +-------+ - +-------+ | . +-----+ | - | +------+ | N | | - | | irqM | +-----+ | - | +------+ | - | | - +----------------------+ - -There is one register per output (MUXCNTL_N) that controls the selection. -Configuration of these MUXCNTL_N registers is done by a system controller -(like the Device Memory and Security Controller on K3 AM654 SoC). System -controller will keep track of the used and unused registers within the Router. -Driver should request the system controller to get the range of GIC IRQs -assigned to the requesting hosts. It is the drivers responsibility to keep -track of Host IRQs. - -Communication between the host processor running an OS and the system -controller happens through a protocol called TI System Control Interface -(TISCI protocol). For more details refer: -Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -TISCI Interrupt Router Node: ----------------------------- -Required Properties: -- compatible: Must be "ti,sci-intr". -- ti,intr-trigger-type: Should be one of the following: - 1: If intr supports edge triggered interrupts. - 4: If intr supports level triggered interrupts. -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value should be 2. - First cell should contain the TISCI device ID of source - Second cell should contain the interrupt source offset - within the device. -- ti,sci: Phandle to TI-SCI compatible System controller node. -- ti,sci-dst-id: TISCI device ID of the destination IRQ controller. -- ti,sci-rm-range-girq: Array of TISCI subtype ids representing the host irqs - assigned to this interrupt router. Each subtype id - corresponds to a range of host irqs. - -For more details on TISCI IRQ resource management refer: -https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html - -Example: --------- -The following example demonstrates both interrupt router node and the consumer -node(main gpio) on the AM654 SoC: - -main_intr: interrupt-controller0 { - compatible = "ti,sci-intr"; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <2>; - ti,sci = <&dmsc>; - ti,sci-dst-id = <56>; - ti,sci-rm-range-girq = <0x1>; -}; - -main_gpio0: gpio@600000 { - ... - interrupt-parent = <&main_intr>; - interrupts = <57 256>, <57 257>, <57 258>, - <57 259>, <57 260>, <57 261>; - ... -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml new file mode 100644 index 000000000000..cff6a956afb4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Router + +maintainers: + - Lokesh Vutla <lokeshvutla@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Router (INTR) module provides a mechanism to mux M + interrupt inputs to N interrupt outputs, where all M inputs are selectable + to be driven per N output. An Interrupt Router can either handle edge + triggered or level triggered interrupts and that is fixed in hardware. + + Interrupt Router + +----------------------+ + | Inputs Outputs | + +-------+ | +------+ +-----+ | + | GPIO |----------->| | irq0 | | 0 | | Host IRQ + +-------+ | +------+ +-----+ | controller + | . . | +-------+ + +-------+ | . . |----->| IRQ | + | INTA |----------->| . . | +-------+ + +-------+ | . +-----+ | + | +------+ | N | | + | | irqM | +-----+ | + | +------+ | + | | + +----------------------+ + + There is one register per output (MUXCNTL_N) that controls the selection. + Configuration of these MUXCNTL_N registers is done by a system controller + (like the Device Memory and Security Controller on K3 AM654 SoC). System + controller will keep track of the used and unused registers within the Router. + Driver should request the system controller to get the range of GIC IRQs + assigned to the requesting hosts. It is the drivers responsibility to keep + track of Host IRQs. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-intr + + ti,intr-trigger-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4] + description: | + Should be one of the following. + 1 = If intr supports edge triggered interrupts. + 4 = If intr supports level triggered interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: | + The 1st cell should contain interrupt router input hw number. + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTR output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for intr output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + +required: + - compatible + - ti,intr-trigger-type + - interrupt-controller + - '#interrupt-cells' + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +examples: + - | + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <131>; + ti,interrupt-ranges = <0 360 32>; + }; diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml index 5887c917d480..58fe9d02a781 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml @@ -30,9 +30,13 @@ allOf: then: properties: clock-output-names: - items: - - const: clk_out_sd0 - - const: clk_in_sd0 + oneOf: + - items: + - const: clk_out_sd0 + - const: clk_in_sd0 + - items: + - const: clk_out_sd1 + - const: clk_in_sd1 properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 75dc1168d717..10b45966f1b8 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> allOf: - $ref: "mmc-controller.yaml" diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt index 0c9cf6a8808c..26a8f320a156 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -50,6 +50,8 @@ Optional properties: error caused by stop clock(fifo full) Valid range = [0:0x7]. if not present, default value is 0. applied to compatible "mediatek,mt2701-mmc". +- resets: Phandle and reset specifier pair to softreset line of MSDC IP. +- reset-names: Should be "hrst". Examples: mmc0: mmc@11230000 { diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml index 1cccc0478d49..bec8f8c71ff2 100644 --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS MMC controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> description: | The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index 2cf3affa1be7..96c0b1440c9c 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -15,8 +15,15 @@ Required properties: - "nvidia,tegra210-sdhci": for Tegra210 - "nvidia,tegra186-sdhci": for Tegra186 - "nvidia,tegra194-sdhci": for Tegra194 -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. +- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries. + One for the module clock and one for the timeout clock. + For all other Tegra devices, must contain a single entry for + the module clock. See ../clocks/clock-bindings.txt for details. +- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the + strings 'sdhci' and 'tmclk' to represent the module and + the timeout clocks, respectively. + For all other Tegra devices must contain the string 'sdhci' + to represent the module clock. - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the following entries: @@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194: Example: sdhci@700b0000 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC1>; @@ -115,3 +122,22 @@ sdhci@700b0000 { nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; status = "disabled"; }; + +sdhci@700b0000 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0000 0x0 0x200>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC1>, + <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>; + clock-names = "sdhci", "tmclk"; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index bf7328aba330..dab208b5c7c7 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -1,4 +1,4 @@ Distributed Switch Architecture Device Tree Bindings ---------------------------------------------------- -See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documenation. +See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation. diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 1c4474036d46..fa2baca8c726 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -54,7 +54,8 @@ properties: phy-connection-type: description: - Operation mode of the PHY interface + Specifies interface type between the Ethernet device and a physical + layer (PHY) device. enum: # There is not a standard bus between the MAC and the PHY, # something proprietary is being used to embed the PHY in the diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 08678af5ed93..8ce5ed8a58dd 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -59,9 +59,15 @@ properties: clocks: maxItems: 1 - pinctrl-0: true + power-domains: + maxItems: 1 + + resets: + maxItems: 1 - pinctrl-names: true + phy-mode: true + + phy-handle: true renesas,no-ether-link: type: boolean @@ -74,6 +80,11 @@ properties: specify when the Ether LINK signal is active-low instead of normal active-high +patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: ethernet-phy.yaml# + required: - compatible - reg @@ -83,7 +94,8 @@ required: - '#address-cells' - '#size-cells' - clocks - - pinctrl-0 + +additionalProperties: false examples: # Lager board @@ -99,8 +111,6 @@ examples: clocks = <&mstp8_clks R8A7790_CLK_ETHER>; phy-mode = "rmii"; phy-handle = <&phy1>; - pinctrl-0 = <ðer_pins>; - pinctrl-names = "default"; renesas,ether-link-active-low; #address-cells = <1>; #size-cells = <0>; @@ -109,7 +119,5 @@ examples: reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&phy1_pins>; - pinctrl-names = "default"; }; }; diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml index 64b2c64ca806..a1e2be737eec 100644 --- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml @@ -9,6 +9,14 @@ title: PCIe RC controller on Intel Gateway SoCs maintainers: - Dilip Kota <eswara.kota@linux.intel.com> +select: + properties: + compatible: + contains: + const: intel,lgm-pcie + required: + - compatible + properties: compatible: items: diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml index da68f4a25dd9..8740e076061e 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS PWM controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> - Anson Huang <anson.huang@nxp.com> properties: diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml index 1b50cedbfb3e..50df1a40bbe3 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> allOf: - $ref: "/schemas/spi/spi-controller.yaml#" diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index 22882e769e26..312d8fee9dbb 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -39,6 +39,7 @@ properties: spi common code does not support use of CS signals discontinuously. i.MX8DXL-EVK board only uses CS1 without using CS0. Therefore, add this property to re-config the chipselect value in the LPSPI driver. + type: boolean required: - compatible diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml index aedac1669998..16b57f57d103 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP i.MX Thermal Binding maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> - Anson Huang <Anson.Huang@nxp.com> properties: diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml new file mode 100644 index 000000000000..2a0e9cd9fbcf --- /dev/null +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/sifive,clint.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive Core Local Interruptor + +maintainers: + - Palmer Dabbelt <palmer@dabbelt.com> + - Anup Patel <anup.patel@wdc.com> + +description: + SiFive (and other RISC-V) SOCs include an implementation of the SiFive + Core Local Interruptor (CLINT) for M-mode timer and M-mode inter-processor + interrupts. It directly connects to the timer and inter-processor interrupt + lines of various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local + interrupt controller is the parent interrupt controller for CLINT device. + The clock frequency of CLINT is specified via "timebase-frequency" DT + property of "/cpus" DT node. The "timebase-frequency" DT property is + described in Documentation/devicetree/bindings/riscv/cpus.yaml + +properties: + compatible: + items: + - const: sifive,fu540-c000-clint + - const: sifive,clint0 + + description: + Should be "sifive,<chip>-clint" and "sifive,clint<version>". + Supported compatible strings are - + "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated + onto the SiFive FU540 chip, and "sifive,clint0" for the SiFive + CLINT v0 IP block with no chip integration tweaks. + Please refer to sifive-blocks-ip-versioning.txt for details + + reg: + maxItems: 1 + + interrupts-extended: + minItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts-extended + +examples: + - | + timer@2000000 { + compatible = "sifive,fu540-c000-clint", "sifive,clint0"; + interrupts-extended = <&cpu1intc 3 &cpu1intc 7 + &cpu2intc 3 &cpu2intc 7 + &cpu3intc 3 &cpu3intc 7 + &cpu4intc 3 &cpu4intc 7>; + reg = <0x2000000 0x10000>; + }; +... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2baee2c817c1..63996ab03521 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -993,7 +993,7 @@ patternProperties: "^sst,.*": description: Silicon Storage Technology, Inc. "^sstar,.*": - description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. + description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.) "^st,.*": description: STMicroelectronics |