diff options
Diffstat (limited to 'Documentation/devicetree')
15 files changed, 502 insertions, 363 deletions
diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt deleted file mode 100644 index e5eef59a93dc..000000000000 --- a/Documentation/devicetree/bindings/input/da9062-onkey.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Dialog DA9061/62/63 OnKey Module - -This module is part of the DA9061/DA9062/DA9063. For more details about entire -DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt -For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml - -This module provides the KEY_POWER event. - -Required properties: - -- compatible: should be one of the following valid compatible string lines: - "dlg,da9061-onkey", "dlg,da9062-onkey" - "dlg,da9062-onkey" - "dlg,da9063-onkey" - -Optional properties: - -- dlg,disable-key-power : Disable power-down using a long key-press. If this - entry exists the OnKey driver will remove support for the KEY_POWER key - press when triggered using a long press of the OnKey. - -Example: DA9063 - - pmic0: da9063@58 { - onkey { - compatible = "dlg,da9063-onkey"; - dlg,disable-key-power; - }; - }; - -Example: DA9062 - - pmic0: da9062@58 { - onkey { - compatible = "dlg,da9062-onkey"; - dlg,disable-key-power; - }; - }; - -Example: DA9061 using a fall-back compatible for the DA9062 onkey driver - - pmic0: da9061@58 { - onkey { - compatible = "dlg,da9061-onkey", "dlg,da9062-onkey"; - dlg,disable-key-power; - }; - }; diff --git a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml new file mode 100644 index 000000000000..1480d95421e1 --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/dlg,da9062-onkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9061/62/63 OnKey Module + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This module is part of the DA9061/DA9062/DA9063. For more details about entire + DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + + This module provides the KEY_POWER event. + +properties: + compatible: + oneOf: + - enum: + - dlg,da9062-onkey + - dlg,da9063-onkey + - items: + - const: dlg,da9061-onkey + - const: dlg,da9062-onkey + + dlg,disable-key-power: + type: boolean + description: + Disable power-down using a long key-press. If this entry exists + the OnKey driver will remove support for the KEY_POWER key press + when triggered using a long press of the OnKey. + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml new file mode 100644 index 000000000000..4aa36903e755 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's HLCD Controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two + subdevices, a PWM chip and a Display Controller. + +properties: + compatible: + enum: + - atmel,at91sam9n12-hlcdc + - atmel,at91sam9x5-hlcdc + - atmel,sama5d2-hlcdc + - atmel,sama5d3-hlcdc + - atmel,sama5d4-hlcdc + - microchip,sam9x60-hlcdc + - microchip,sam9x75-xlcdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + + clock-names: + items: + - const: periph_clk + - const: sys_clk + - const: slow_clk + - const: lvds_pll_clk + minItems: 3 + + display-controller: + $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml + + pwm: + $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + lcd_controller: lcd-controller@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk", "sys_clk", "slow_clk"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + + display-controller { + compatible = "atmel,hlcdc-display-controller"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml new file mode 100644 index 000000000000..0dc6a40b63f4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Flexcom (Flexible Serial Communication Unit) + +maintainers: + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> + +description: + The Microchip Flexcom is just a wrapper which embeds a SPI controller, + an I2C controller and an USART. Only one function can be used at a + time and is chosen at boot time according to the device tree. + +properties: + compatible: + oneOf: + - const: atmel,sama5d2-flexcom + - items: + - const: microchip,sam9x7-flexcom + - const: atmel,sama5d2-flexcom + - items: + - const: microchip,sama7g5-flexcom + - const: atmel,sama5d2-flexcom + + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + description: + One range for the full I/O register region. (including USART, + TWI and SPI registers). + items: + maxItems: 3 + + atmel,flexcom-mode: + description: | + Specifies the flexcom mode as follows: + 1: USART + 2: SPI + 3: I2C. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3] + +patternProperties: + "^serial@[0-9a-f]+$": + type: object + description: + Child node describing USART. See atmel-usart.txt for details + of USART bindings. + + "^spi@[0-9a-f]+$": + type: object + description: + Child node describing SPI. See ../spi/spi_atmel.txt for details + of SPI bindings. + + "^i2c@[0-9a-f]+$": + $ref: /schemas/i2c/atmel,at91sam-i2c.yaml + description: + Child node describing I2C. + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + - atmel,flexcom-mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt deleted file mode 100644 index af692e8833a5..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) - -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C -controller and an USART. Only one function can be used at a time and is chosen -at boot time according to the device tree. - -Required properties: -- compatible: Should be "atmel,sama5d2-flexcom" - or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom" -- reg: Should be the offset/length value for Flexcom dedicated - I/O registers (without USART, TWI or SPI registers). -- clocks: Should be the Flexcom peripheral clock from PMC. -- #address-cells: Should be <1> -- #size-cells: Should be <1> -- ranges: Should be one range for the full I/O register region - (including USART, TWI and SPI registers). -- atmel,flexcom-mode: Should be one of the following values: - - <1> for USART - - <2> for SPI - - <3> for I2C - -Required child: -A single available child device of type matching the "atmel,flexcom-mode" -property. - -The phandle provided by the clocks property of the child is the same as one for -the Flexcom parent. - -For other properties, please refer to the documentations of the respective -device: -- ../serial/atmel-usart.txt -- ../spi/spi_atmel.txt -- ../i2c/i2c-at91.txt - -Example: - -flexcom@f8034000 { - compatible = "atmel,sama5d2-flexcom"; - reg = <0xf8034000 0x200>; - clocks = <&flx0_clk>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xf8034000 0x800>; - atmel,flexcom-mode = <2>; - - spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&flx0_clk>; - clock-names = "spi_clk"; - atmel,fifo-size = <32>; - - flash@0 { - compatible = "atmel,at25f512b"; - reg = <0>; - spi-max-frequency = <20000000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt deleted file mode 100644 index 7de696eefaed..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt +++ /dev/null @@ -1,56 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver - -Required properties: - - compatible: value should be one of the following: - "atmel,at91sam9n12-hlcdc" - "atmel,at91sam9x5-hlcdc" - "atmel,sama5d2-hlcdc" - "atmel,sama5d3-hlcdc" - "atmel,sama5d4-hlcdc" - "microchip,sam9x60-hlcdc" - "microchip,sam9x75-xlcdc" - - reg: base address and size of the HLCDC device registers. - - clock-names: the name of the 3 clocks requested by the HLCDC device. - Should contain "periph_clk", "sys_clk" and "slow_clk". - - clocks: should contain the 3 clocks requested by the HLCDC device. - - interrupts: should contain the description of the HLCDC interrupt line - -The HLCDC IP exposes two subdevices: - - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt - - a Display Controller: see ../display/atmel/hlcdc-dc.txt - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - - hlcdc-display-controller { - compatible = "atmel,hlcdc-display-controller"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - hlcdc_panel_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; - }; - }; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt deleted file mode 100644 index e4eedd3bd233..000000000000 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ /dev/null @@ -1,124 +0,0 @@ -* Dialog DA9062 Power Management Integrated Circuit (PMIC) - -Product information for the DA9062 and DA9061 devices can be found here: -- https://www.dialog-semiconductor.com/products/da9062 -- https://www.dialog-semiconductor.com/products/da9061 - -The DA9062 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-rtc : : Real-Time Clock -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal -da9062-gpio : : GPIOs - -The DA9061 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal - -====== - -Required properties: - -- compatible : Should be - "dlg,da9062" for DA9062 - "dlg,da9061" for DA9061 -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). - -Optional properties: - -- gpio-controller : Marks the device as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify the gpio polarity. - -See Documentation/devicetree/bindings/gpio/gpio.txt for further information on -GPIO bindings. - -- interrupts : IRQ line information. -- interrupt-controller - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -further information on IRQ bindings. - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9062 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - buck4 : BUCK_4 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The DA9061 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - - regulator-initial-mode may be specified for buck regulators using mode values - from include/dt-bindings/regulator/dlg,da9063-regulator.h. - -- rtc : This node defines settings required for the Real-Time Clock associated - with the DA9062. There are currently no entries in this binding, however - compatible = "dlg,da9062-rtc" should be added if a node is created. - -- onkey : See ../input/da9062-onkey.txt - -- watchdog: See ../watchdog/da9062-wdt.txt - -- thermal : See ../thermal/da9062-thermal.txt - -Example: - - pmic0: da9062@58 { - compatible = "dlg,da9062"; - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9062-rtc"; - }; - - regulators { - DA9062_BUCK1: buck1 { - regulator-name = "BUCK1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; - regulator-boot-on; - }; - DA9062_LDO1: ldo1 { - regulator-name = "LDO_1"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml index c5a7e10d7d80..51612dc22748 100644 --- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) +title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC) maintainers: - Steve Twiss <stwiss.opensource@diasemi.com> @@ -17,10 +17,17 @@ description: | moment where all voltage monitors are disabled. Next, as da9063 only supports UV *and* OV monitoring, both must be set to the same severity and value (0: disable, 1: enable). + Product information for the DA906{3L,3,2,1} devices can be found here: + - https://www.dialog-semiconductor.com/products/da9063l + - https://www.dialog-semiconductor.com/products/da9063 + - https://www.dialog-semiconductor.com/products/da9062 + - https://www.dialog-semiconductor.com/products/da9061 properties: compatible: enum: + - dlg,da9061 + - dlg,da9062 - dlg,da9063 - dlg,da9063l @@ -35,20 +42,28 @@ properties: "#interrupt-cells": const: 2 - dlg,use-sw-pm: - type: boolean - description: - Disable the watchdog during suspend. - Only use this option if you can't use the watchdog automatic suspend - function during a suspend (see register CONTROL_B). + gpio-controller: true - watchdog: + "#gpio-cells": + const: 2 + + gpio: type: object - $ref: /schemas/watchdog/watchdog.yaml# - unevaluatedProperties: false + additionalProperties: false properties: compatible: - const: dlg,da9063-watchdog + const: dlg,da9062-gpio + + onkey: + $ref: /schemas/input/dlg,da9062-onkey.yaml + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$": + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false rtc: type: object @@ -56,37 +71,86 @@ properties: unevaluatedProperties: false properties: compatible: - const: dlg,da9063-rtc + enum: + - dlg,da9062-rtc + - dlg,da9063-rtc - onkey: - type: object - $ref: /schemas/input/input.yaml# - unevaluatedProperties: false - properties: - compatible: - const: dlg,da9063-onkey + thermal: + $ref: /schemas/thermal/dlg,da9062-thermal.yaml - dlg,disable-key-power: - type: boolean - description: | - Disable power-down using a long key-press. - If this entry does not exist then by default the key-press triggered - power down is enabled and the OnKey will support both KEY_POWER and - KEY_SLEEP. + watchdog: + $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml - regulators: +patternProperties: + "^(.+-hog(-[0-9]+)?)$": type: object - additionalProperties: false - patternProperties: - "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": - $ref: /schemas/regulator/regulator.yaml - unevaluatedProperties: false + + required: + - gpio-hog required: - compatible - reg - - interrupts - - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + enum: + - dlg,da9063 + - dlg,da9063l + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^buck[1-4]$": false + thermal: false + required: + - interrupts + - interrupt-controller + - '#interrupt-cells' + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9062 + then: + properties: + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false + required: + - gpio + - onkey + - rtc + - thermal + - watchdog + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9061 + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false + rtc: false + required: + - onkey + - thermal + - watchdog additionalProperties: false @@ -99,10 +163,10 @@ examples: pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - #interrupt-cells = <2>; interrupt-parent = <&gpio6>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; @@ -143,4 +207,121 @@ examples: }; }; }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9063-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + gpio-controller; + #gpio-cells = <2>; + + sd0-pwr-sel-hog { + gpio-hog; + gpios = <1 0>; + input; + line-name = "SD0_PWR_SEL"; + }; + + sd1-pwr-sel-hog { + gpio-hog; + gpios = <2 0>; + input; + line-name = "SD1_PWR_SEL"; + }; + + sw-et0-en-hog { + gpio-hog; + gpios = <3 0>; + input; + line-name = "SW_ET0_EN#"; + }; + + pmic-good-hog { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "PMIC_PGOOD"; + }; + + gpio { + compatible = "dlg,da9062-gpio"; + }; + + onkey { + compatible = "dlg,da9062-onkey"; + }; + + regulators { + buck1 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck2 { + regulator-name = "vdd_soc"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck3 { + regulator-name = "vdd_ddr3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck4 { + regulator-name = "vdd_eth"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + ldo1 { + regulator-name = "vdd_snvs"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo2 { + regulator-name = "vdd_high"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo3 { + regulator-name = "vdd_eth_io"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + ldo4 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + + rtc { + compatible = "dlg,da9062-rtc"; + }; + + thermal { + compatible = "dlg,da9062-thermal"; + }; + + watchdog { + compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index e1ca4f297c6d..aac8819bd00b 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -93,6 +93,11 @@ properties: '#size-cells': const: 0 + '#gpio-cells': + const: 2 + + gpio-controller: true + typec: $ref: /schemas/chrome/google,cros-ec-typec.yaml# @@ -275,6 +280,8 @@ examples: interrupts = <99 0>; interrupt-parent = <&gpio7>; spi-max-frequency = <5000000>; + #gpio-cells = <2>; + gpio-controller; proximity { compatible = "google,cros-ec-mkbp-proximity"; diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml index 044cd7542c2b..f438c2374966 100644 --- a/Documentation/devicetree/bindings/mfd/iqs62x.yaml +++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Specifies the name of the calibration and configuration file selected by the driver. If this property is omitted, the name is chosen based on the diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index 798705ab6a46..b97d77015335 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -19,6 +19,7 @@ properties: - enum: - qcom,msm8976-tcsr - qcom,msm8998-tcsr + - qcom,qcm2290-tcsr - qcom,qcs404-tcsr - qcom,sc7180-tcsr - qcom,sc7280-tcsr @@ -28,6 +29,7 @@ properties: - qcom,sdx55-tcsr - qcom,sdx65-tcsr - qcom,sm4450-tcsr + - qcom,sm6115-tcsr - qcom,sm8150-tcsr - qcom,sm8250-tcsr - qcom,sm8350-tcsr diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 084b5c2a2a3c..9d55bee155ce 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -72,7 +72,10 @@ properties: - rockchip,rk3588-qos - rockchip,rv1126-qos - starfive,jh7100-sysmain + - ti,am62-usb-phy-ctrl - ti,am654-dss-oldi-io-ctrl + - ti,am654-serdes-ctrl + - ti,j784s4-pcie-ctrl - const: syscon diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml index c04d57ba22b4..52ed228fb1e7 100644 --- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml @@ -34,6 +34,8 @@ properties: interrupt-controller: true + system-power-controller: true + "#interrupt-cells": const: 1 diff --git a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt deleted file mode 100644 index e241bb5a5584..000000000000 --- a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Dialog DA9062/61 TJUNC Thermal Module - -This module is part of the DA9061/DA9062. For more details about entire -DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt - -Junction temperature thermal module uses an interrupt signal to identify -high THERMAL_TRIP_HOT temperatures for the PMIC device. - -Required properties: - -- compatible: should be one of the following valid compatible string lines: - "dlg,da9061-thermal", "dlg,da9062-thermal" - "dlg,da9062-thermal" - -Optional properties: - -- polling-delay-passive : Specify the polling period, measured in - milliseconds, between thermal zone device update checks. - -Example: DA9062 - - pmic0: da9062@58 { - thermal { - compatible = "dlg,da9062-thermal"; - polling-delay-passive = <3000>; - }; - }; - -Example: DA9061 using a fall-back compatible for the DA9062 onkey driver - - pmic0: da9061@58 { - thermal { - compatible = "dlg,da9061-thermal", "dlg,da9062-thermal"; - polling-delay-passive = <3000>; - }; - }; diff --git a/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml new file mode 100644 index 000000000000..e8b2cac41084 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/dlg,da9062-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9062/61 TJUNC Thermal Module + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This module is part of the DA9061/DA9062. For more details about entire + DA906{1,2} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + + Junction temperature thermal module uses an interrupt signal to identify + high THERMAL_TRIP_HOT temperatures for the PMIC device. + +properties: + compatible: + oneOf: + - const: dlg,da9062-thermal + - items: + - const: dlg,da9061-thermal + - const: dlg,da9062-thermal + + polling-delay-passive: + description: + Specify the polling period, measured in milliseconds, between + thermal zone device update checks. + +required: + - compatible + +additionalProperties: false |