summaryrefslogtreecommitdiffstats
path: root/Documentation/i2c/chips/max6875
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/i2c/chips/max6875')
-rw-r--r--Documentation/i2c/chips/max687522
1 files changed, 17 insertions, 5 deletions
diff --git a/Documentation/i2c/chips/max6875 b/Documentation/i2c/chips/max6875
index b4fb49b41813..b02002898a09 100644
--- a/Documentation/i2c/chips/max6875
+++ b/Documentation/i2c/chips/max6875
@@ -2,10 +2,10 @@ Kernel driver max6875
=====================
Supported chips:
- * Maxim max6874, max6875
- Prefixes: 'max6875'
+ * Maxim MAX6874, MAX6875
+ Prefix: 'max6875'
Addresses scanned: 0x50, 0x52
- Datasheets:
+ Datasheet:
http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf
Author: Ben Gardner <bgardner@wabtec.com>
@@ -23,14 +23,26 @@ Module Parameters
Description
-----------
-The MAXIM max6875 is a EEPROM-programmable power-supply sequencer/supervisor.
+The Maxim MAX6875 is an EEPROM-programmable power-supply sequencer/supervisor.
It provides timed outputs that can be used as a watchdog, if properly wired.
It also provides 512 bytes of user EEPROM.
-At reset, the max6875 reads the configuration eeprom into its configuration
+At reset, the MAX6875 reads the configuration EEPROM into its configuration
registers. The chip then begins to operate according to the values in the
registers.
+The Maxim MAX6874 is a similar, mostly compatible device, with more intputs
+and outputs:
+
+ vin gpi vout
+MAX6874 6 4 8
+MAX6875 4 3 5
+
+MAX6874 chips can have four different addresses (as opposed to only two for
+the MAX6875). The additional addresses (0x54 and 0x56) are not probed by
+this driver by default, but the probe module parameter can be used if
+needed.
+
See the datasheet for details on how to program the EEPROM.