summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-dev20
-rw-r--r--Documentation/ABI/testing/sysfs-devices-memory24
-rw-r--r--Documentation/ABI/testing/sysfs-kernel-mm6
-rw-r--r--Documentation/ABI/testing/sysfs-kernel-mm-hugepages15
-rw-r--r--Documentation/DMA-attributes.txt9
-rw-r--r--Documentation/DocBook/kernel-locking.tmpl57
-rw-r--r--Documentation/DocBook/uio-howto.tmpl63
-rw-r--r--Documentation/HOWTO2
-rw-r--r--Documentation/fb/sh7760fb.txt131
-rw-r--r--Documentation/fb/tridentfb.txt46
-rw-r--r--Documentation/feature-removal-schedule.txt8
-rw-r--r--Documentation/filesystems/Locking7
-rw-r--r--Documentation/filesystems/bfs.txt10
-rw-r--r--Documentation/filesystems/proc.txt44
-rw-r--r--Documentation/filesystems/sysfs.txt6
-rw-r--r--Documentation/kernel-parameters.txt42
-rw-r--r--Documentation/laptops/thinkpad-acpi.txt26
-rw-r--r--Documentation/networking/e1000.txt14
-rw-r--r--Documentation/networking/udplite.txt2
-rw-r--r--Documentation/power/00-INDEX4
-rw-r--r--Documentation/power/apm-acpi.txt32
-rw-r--r--Documentation/power/pm.txt257
-rw-r--r--Documentation/powerpc/booting-without-of.txt189
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt38
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt53
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt17
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/pmc.txt63
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/tsec.txt31
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/upm-nand.txt28
-rw-r--r--Documentation/powerpc/dts-bindings/gpio/led.txt15
-rw-r--r--Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl2
-rw-r--r--Documentation/specialix.txt8
-rw-r--r--Documentation/sysfs-rules.txt5
-rw-r--r--Documentation/telephony/ixj.txt13
-rw-r--r--Documentation/video4linux/w9968cf.txt3
-rw-r--r--Documentation/vm/hugetlbpage.txt23
36 files changed, 819 insertions, 494 deletions
diff --git a/Documentation/ABI/testing/sysfs-dev b/Documentation/ABI/testing/sysfs-dev
new file mode 100644
index 000000000000..a9f2b8b0530f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-dev
@@ -0,0 +1,20 @@
+What: /sys/dev
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Dan Williams <dan.j.williams@intel.com>
+Description: The /sys/dev tree provides a method to look up the sysfs
+ path for a device using the information returned from
+ stat(2). There are two directories, 'block' and 'char',
+ beneath /sys/dev containing symbolic links with names of
+ the form "<major>:<minor>". These links point to the
+ corresponding sysfs path for the given device.
+
+ Example:
+ $ readlink /sys/dev/block/8:32
+ ../../block/sdc
+
+ Entries in /sys/dev/char and /sys/dev/block will be
+ dynamically created and destroyed as devices enter and
+ leave the system.
+
+Users: mdadm <linux-raid@vger.kernel.org>
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
new file mode 100644
index 000000000000..7a16fe1e2270
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -0,0 +1,24 @@
+What: /sys/devices/system/memory
+Date: June 2008
+Contact: Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+ The /sys/devices/system/memory contains a snapshot of the
+ internal state of the kernel memory blocks. Files could be
+ added or removed dynamically to represent hot-add/remove
+ operations.
+
+Users: hotplug memory add/remove tools
+ https://w3.opensource.ibm.com/projects/powerpc-utils/
+
+What: /sys/devices/system/memory/memoryX/removable
+Date: June 2008
+Contact: Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+ The file /sys/devices/system/memory/memoryX/removable
+ indicates whether this memory block is removable or not.
+ This is useful for a user-level agent to determine
+ identify removable sections of the memory before attempting
+ potentially expensive hot-remove memory operation
+
+Users: hotplug memory remove tools
+ https://w3.opensource.ibm.com/projects/powerpc-utils/
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm b/Documentation/ABI/testing/sysfs-kernel-mm
new file mode 100644
index 000000000000..190d523ac159
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-mm
@@ -0,0 +1,6 @@
+What: /sys/kernel/mm
+Date: July 2008
+Contact: Nishanth Aravamudan <nacc@us.ibm.com>, VM maintainers
+Description:
+ /sys/kernel/mm/ should contain any and all VM
+ related information in /sys/kernel/.
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-hugepages b/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
new file mode 100644
index 000000000000..e21c00571cf4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
@@ -0,0 +1,15 @@
+What: /sys/kernel/mm/hugepages/
+Date: June 2008
+Contact: Nishanth Aravamudan <nacc@us.ibm.com>, hugetlb maintainers
+Description:
+ /sys/kernel/mm/hugepages/ contains a number of subdirectories
+ of the form hugepages-<size>kB, where <size> is the page size
+ of the hugepages supported by the kernel/CPU combination.
+
+ Under these directories are a number of files:
+ nr_hugepages
+ nr_overcommit_hugepages
+ free_hugepages
+ surplus_hugepages
+ resv_hugepages
+ See Documentation/vm/hugetlbpage.txt for details.
diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt
index 6d772f84b477..b768cc0e402b 100644
--- a/Documentation/DMA-attributes.txt
+++ b/Documentation/DMA-attributes.txt
@@ -22,3 +22,12 @@ ready and available in memory. The DMA of the "completion indication"
could race with data DMA. Mapping the memory used for completion
indications with DMA_ATTR_WRITE_BARRIER would prevent the race.
+DMA_ATTR_WEAK_ORDERING
+----------------------
+
+DMA_ATTR_WEAK_ORDERING specifies that reads and writes to the mapping
+may be weakly ordered, that is that reads and writes may pass each other.
+
+Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING,
+those that do not will simply ignore the attribute and exhibit default
+behavior.
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 2510763295d0..084f6ad7b7a0 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -219,10 +219,10 @@
</para>
<sect1 id="lock-intro">
- <title>Three Main Types of Kernel Locks: Spinlocks, Mutexes and Semaphores</title>
+ <title>Two Main Types of Kernel Locks: Spinlocks and Mutexes</title>
<para>
- There are three main types of kernel locks. The fundamental type
+ There are two main types of kernel locks. The fundamental type
is the spinlock
(<filename class="headerfile">include/asm/spinlock.h</filename>),
which is a very simple single-holder lock: if you can't get the
@@ -240,14 +240,6 @@
use a spinlock instead.
</para>
<para>
- The third type is a semaphore
- (<filename class="headerfile">include/linux/semaphore.h</filename>): it
- can have more than one holder at any time (the number decided at
- initialization time), although it is most commonly used as a
- single-holder lock (a mutex). If you can't get a semaphore, your
- task will be suspended and later on woken up - just like for mutexes.
- </para>
- <para>
Neither type of lock is recursive: see
<xref linkend="deadlock"/>.
</para>
@@ -278,7 +270,7 @@
</para>
<para>
- Semaphores still exist, because they are required for
+ Mutexes still exist, because they are required for
synchronization between <firstterm linkend="gloss-usercontext">user
contexts</firstterm>, as we will see below.
</para>
@@ -289,18 +281,17 @@
<para>
If you have a data structure which is only ever accessed from
- user context, then you can use a simple semaphore
- (<filename>linux/linux/semaphore.h</filename>) to protect it. This
- is the most trivial case: you initialize the semaphore to the number
- of resources available (usually 1), and call
- <function>down_interruptible()</function> to grab the semaphore, and
- <function>up()</function> to release it. There is also a
- <function>down()</function>, which should be avoided, because it
+ user context, then you can use a simple mutex
+ (<filename>include/linux/mutex.h</filename>) to protect it. This
+ is the most trivial case: you initialize the mutex. Then you can
+ call <function>mutex_lock_interruptible()</function> to grab the mutex,
+ and <function>mutex_unlock()</function> to release it. There is also a
+ <function>mutex_lock()</function>, which should be avoided, because it
will not return if a signal is received.
</para>
<para>
- Example: <filename>linux/net/core/netfilter.c</filename> allows
+ Example: <filename>net/netfilter/nf_sockopt.c</filename> allows
registration of new <function>setsockopt()</function> and
<function>getsockopt()</function> calls, with
<function>nf_register_sockopt()</function>. Registration and
@@ -515,7 +506,7 @@
<listitem>
<para>
If you are in a process context (any syscall) and want to
- lock other process out, use a semaphore. You can take a semaphore
+ lock other process out, use a mutex. You can take a mutex
and sleep (<function>copy_from_user*(</function> or
<function>kmalloc(x,GFP_KERNEL)</function>).
</para>
@@ -662,7 +653,7 @@
<entry>SLBH</entry>
<entry>SLBH</entry>
<entry>SLBH</entry>
-<entry>DI</entry>
+<entry>MLI</entry>
<entry>None</entry>
</row>
@@ -692,8 +683,8 @@
<entry>spin_lock_bh</entry>
</row>
<row>
-<entry>DI</entry>
-<entry>down_interruptible</entry>
+<entry>MLI</entry>
+<entry>mutex_lock_interruptible</entry>
</row>
</tbody>
@@ -1310,7 +1301,7 @@ as Alan Cox says, <quote>Lock data, not code</quote>.
<para>
There is a coding bug where a piece of code tries to grab a
spinlock twice: it will spin forever, waiting for the lock to
- be released (spinlocks, rwlocks and semaphores are not
+ be released (spinlocks, rwlocks and mutexes are not
recursive in Linux). This is trivial to diagnose: not a
stay-up-five-nights-talk-to-fluffy-code-bunnies kind of
problem.
@@ -1335,7 +1326,7 @@ as Alan Cox says, <quote>Lock data, not code</quote>.
<para>
This complete lockup is easy to diagnose: on SMP boxes the
- watchdog timer or compiling with <symbol>DEBUG_SPINLOCKS</symbol> set
+ watchdog timer or compiling with <symbol>DEBUG_SPINLOCK</symbol> set
(<filename>include/linux/spinlock.h</filename>) will show this up
immediately when it happens.
</para>
@@ -1558,7 +1549,7 @@ the amount of locking which needs to be done.
<title>Read/Write Lock Variants</title>
<para>
- Both spinlocks and semaphores have read/write variants:
+ Both spinlocks and mutexes have read/write variants:
<type>rwlock_t</type> and <structname>struct rw_semaphore</structname>.
These divide users into two classes: the readers and the writers. If
you are only reading the data, you can get a read lock, but to write to
@@ -1681,7 +1672,7 @@ the amount of locking which needs to be done.
#include &lt;linux/slab.h&gt;
#include &lt;linux/string.h&gt;
+#include &lt;linux/rcupdate.h&gt;
- #include &lt;linux/semaphore.h&gt;
+ #include &lt;linux/mutex.h&gt;
#include &lt;asm/errno.h&gt;
struct object
@@ -1913,7 +1904,7 @@ machines due to caching.
</listitem>
<listitem>
<para>
- <function> put_user()</function>
+ <function>put_user()</function>
</para>
</listitem>
</itemizedlist>
@@ -1927,13 +1918,13 @@ machines due to caching.
<listitem>
<para>
- <function>down_interruptible()</function> and
- <function>down()</function>
+ <function>mutex_lock_interruptible()</function> and
+ <function>mutex_lock()</function>
</para>
<para>
- There is a <function>down_trylock()</function> which can be
+ There is a <function>mutex_trylock()</function> which can be
used inside interrupt context, as it will not sleep.
- <function>up()</function> will also never sleep.
+ <function>mutex_unlock()</function> will also never sleep.
</para>
</listitem>
</itemizedlist>
@@ -2023,7 +2014,7 @@ machines due to caching.
<para>
Prior to 2.5, or when <symbol>CONFIG_PREEMPT</symbol> is
unset, processes in user context inside the kernel would not
- preempt each other (ie. you had that CPU until you have it up,
+ preempt each other (ie. you had that CPU until you gave it up,
except for interrupts). With the addition of
<symbol>CONFIG_PREEMPT</symbol> in 2.5.4, this changed: when
in user context, higher priority tasks can "cut in": spinlocks
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index fdd7f4f887b7..df87d1b93605 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -21,6 +21,18 @@
</affiliation>
</author>
+<copyright>
+ <year>2006-2008</year>
+ <holder>Hans-Jürgen Koch.</holder>
+</copyright>
+
+<legalnotice>
+<para>
+This documentation is Free Software licensed under the terms of the
+GPL version 2.
+</para>
+</legalnotice>
+
<pubdate>2006-12-11</pubdate>
<abstract>
@@ -30,6 +42,12 @@
<revhistory>
<revision>
+ <revnumber>0.5</revnumber>
+ <date>2008-05-22</date>
+ <authorinitials>hjk</authorinitials>
+ <revremark>Added description of write() function.</revremark>
+ </revision>
+ <revision>
<revnumber>0.4</revnumber>
<date>2007-11-26</date>
<authorinitials>hjk</authorinitials>
@@ -57,20 +75,9 @@
</bookinfo>
<chapter id="aboutthisdoc">
-<?dbhtml filename="about.html"?>
+<?dbhtml filename="aboutthis.html"?>
<title>About this document</title>
-<sect1 id="copyright">
-<?dbhtml filename="copyright.html"?>
-<title>Copyright and License</title>
-<para>
- Copyright (c) 2006 by Hans-Jürgen Koch.</para>
-<para>
-This documentation is Free Software licensed under the terms of the
-GPL version 2.
-</para>
-</sect1>
-
<sect1 id="translations">
<?dbhtml filename="translations.html"?>
<title>Translations</title>
@@ -189,6 +196,30 @@ interested in translating it, please email me
represents the total interrupt count. You can use this number
to figure out if you missed some interrupts.
</para>
+ <para>
+ For some hardware that has more than one interrupt source internally,
+ but not separate IRQ mask and status registers, there might be
+ situations where userspace cannot determine what the interrupt source
+ was if the kernel handler disables them by writing to the chip's IRQ
+ register. In such a case, the kernel has to disable the IRQ completely
+ to leave the chip's register untouched. Now the userspace part can
+ determine the cause of the interrupt, but it cannot re-enable
+ interrupts. Another cornercase is chips where re-enabling interrupts
+ is a read-modify-write operation to a combined IRQ status/acknowledge
+ register. This would be racy if a new interrupt occurred
+ simultaneously.
+ </para>
+ <para>
+ To address these problems, UIO also implements a write() function. It
+ is normally not used and can be ignored for hardware that has only a
+ single interrupt source or has separate IRQ mask and status registers.
+ If you need it, however, a write to <filename>/dev/uioX</filename>
+ will call the <function>irqcontrol()</function> function implemented
+ by the driver. You have to write a 32-bit value that is usually either
+ 0 or 1 to disable or enable interrupts. If a driver does not implement
+ <function>irqcontrol()</function>, <function>write()</function> will
+ return with <varname>-ENOSYS</varname>.
+ </para>
<para>
To handle interrupts properly, your custom kernel module can
@@ -362,6 +393,14 @@ device is actually used.
<function>open()</function>, you will probably also want a custom
<function>release()</function> function.
</para></listitem>
+
+<listitem><para>
+<varname>int (*irqcontrol)(struct uio_info *info, s32 irq_on)
+</varname>: Optional. If you need to be able to enable or disable
+interrupts from userspace by writing to <filename>/dev/uioX</filename>,
+you can implement this function. The parameter <varname>irq_on</varname>
+will be 0 to disable interrupts and 1 to enable them.
+</para></listitem>
</itemizedlist>
<para>
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 619e8caf30db..c2371c5a98f9 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -358,7 +358,7 @@ Here is a list of some of the different kernel trees available:
- pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
- - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+ - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
- x86, Ingo Molnar <mingo@elte.hu>
diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt
new file mode 100644
index 000000000000..c87bfe5c630a
--- /dev/null
+++ b/Documentation/fb/sh7760fb.txt
@@ -0,0 +1,131 @@
+SH7760/SH7763 integrated LCDC Framebuffer driver
+================================================
+
+0. Overwiew
+-----------
+The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
+supports (in theory) resolutions ranging from 1x1 to 1024x1024,
+with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels.
+
+Caveats:
+* Framebuffer memory must be a large chunk allocated at the top
+ of Area3 (HW requirement). Because of this requirement you should NOT
+ make the driver a module since at runtime it may become impossible to
+ get a large enough contiguous chunk of memory.
+
+* The driver does not support changing resolution while loaded
+ (displays aren't hotpluggable anyway)
+
+* Heavy flickering may be observed
+ a) if you're using 15/16bit color modes at >= 640x480 px resolutions,
+ b) during PCMCIA (or any other slow bus) activity.
+
+* Rotation works only 90degress clockwise, and only if horizontal
+ resolution is <= 320 pixels.
+
+files: drivers/video/sh7760fb.c
+ include/asm-sh/sh7760fb.h
+ Documentation/fb/sh7760fb.txt
+
+1. Platform setup
+-----------------
+SH7760:
+ Video data is fetched via the DMABRG DMA engine, so you have to
+ configure the SH DMAC for DMABRG mode (write 0x94808080 to the
+ DMARSRA register somewhere at boot).
+
+ PFC registers PCCR and PCDR must be set to peripheral mode.
+ (write zeros to both).
+
+The driver does NOT do the above for you since board setup is, well, job
+of the board setup code.
+
+2. Panel definitions
+--------------------
+The LCDC must explicitly be told about the type of LCD panel
+attached. Data must be wrapped in a "struct sh7760fb_platdata" and
+passed to the driver as platform_data.
+
+Suggest you take a closer look at the SH7760 Manual, Section 30.
+(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf)
+
+The following code illustrates what needs to be done to
+get the framebuffer working on a 640x480 TFT:
+
+====================== cut here ======================================
+
+#include <linux/fb.h>
+#include <asm/sh7760fb.h>
+
+/*
+ * NEC NL6440bc26-01 640x480 TFT
+ * dotclock 25175 kHz
+ * Xres 640 Yres 480
+ * Htotal 800 Vtotal 525
+ * HsynStart 656 VsynStart 490
+ * HsynLenn 30 VsynLenn 2
+ *
+ * The linux framebuffer layer does not use the syncstart/synclen
+ * values but right/left/upper/lower margin values. The comments
+ * for the x_margin explain how to calculate those from given
+ * panel sync timings.
+ */
+static struct fb_videomode nl6448bc26 = {
+ .name = "NL6448BC26",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39683, /* in picoseconds! */
+ .hsync_len = 30,
+ .vsync_len = 2,
+ .left_margin = 114, /* HTOT - (HSYNSLEN + HSYNSTART) */
+ .right_margin = 16, /* HSYNSTART - XRES */
+ .upper_margin = 33, /* VTOT - (VSYNLEN + VSYNSTART) */
+ .lower_margin = 10, /* VSYNSTART - YRES */
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+};
+
+static struct sh7760fb_platdata sh7760fb_nl6448 = {
+ .def_mode = &nl6448bc26,
+ .ldmtr = LDMTR_TFT_COLOR_16, /* 16bit TFT panel */
+ .lddfr = LDDFR_8BPP, /* we want 8bit output */
+ .ldpmmr = 0x0070,
+ .ldpspr = 0x0500,
+ .ldaclnr = 0,
+ .ldickr = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) |
+ LDICKR_CLKDIV(1),
+ .rotate = 0,
+ .novsync = 1,
+ .blank = NULL,
+};
+
+/* SH7760:
+ * 0xFE300800: 256 * 4byte xRGB palette ram
+ * 0xFE300C00: 42 bytes ctrl registers
+ */
+static struct resource sh7760_lcdc_res[] = {
+ [0] = {
+ .start = 0xFE300800,
+ .end = 0xFE300CFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sh7760_lcdc_dev = {
+ .dev = {
+ .platform_data = &sh7760fb_nl6448,
+ },
+ .name = "sh7760-lcdc",
+ .id = -1,
+ .resource = sh7760_lcdc_res,
+ .num_resources = ARRAY_SIZE(sh7760_lcdc_res),
+};
+
+====================== cut here ======================================
diff --git a/Documentation/fb/tridentfb.txt b/Documentation/fb/tridentfb.txt
index 8a6c8a43e6a3..45d9de5b13a3 100644
--- a/Documentation/fb/tridentfb.txt
+++ b/Documentation/fb/tridentfb.txt
@@ -3,11 +3,25 @@ Tridentfb is a framebuffer driver for some Trident chip based cards.
The following list of chips is thought to be supported although not all are
tested:
-those from the Image series with Cyber in their names - accelerated
-those with Blade in their names (Blade3D,CyberBlade...) - accelerated
-the newer CyberBladeXP family - nonaccelerated
-
-Only PCI/AGP based cards are supported, none of the older Tridents.
+those from the TGUI series 9440/96XX and with Cyber in their names
+those from the Image series and with Cyber in their names
+those with Blade in their names (Blade3D,CyberBlade...)
+the newer CyberBladeXP family
+
+All families are accelerated. Only PCI/AGP based cards are supported,
+none of the older Tridents.
+The driver supports 8, 16 and 32 bits per pixel depths.
+The TGUI family requires a line length to be power of 2 if acceleration
+is enabled. This means that range of possible resolutions and bpp is
+limited comparing to the range if acceleration is disabled (see list
+of parameters below).
+
+Known bugs:
+1. The driver randomly locks up on 3DImage975 chip with acceleration
+ enabled. The same happens in X11 (Xorg).
+2. The ramdac speeds require some more fine tuning. It is possible to
+ switch resolution which the chip does not support at some depths for
+ older chips.
How to use it?
==============
@@ -17,12 +31,11 @@ video=tridentfb
The parameters for tridentfb are concatenated with a ':' as in this example.
-video=tridentfb:800x600,bpp=16,noaccel
+video=tridentfb:800x600-16@75,noaccel
The second level parameters that tridentfb understands are:
noaccel - turns off acceleration (when it doesn't work for your card)
-accel - force text acceleration (for boards which by default are noacceled)
fp - use flat panel related stuff
crt - assume monitor is present instead of fp
@@ -31,21 +44,24 @@ center - for flat panels and resolutions smaller than native size center the
image, otherwise use
stretch
-memsize - integer value in Kb, use if your card's memory size is misdetected.
+memsize - integer value in KB, use if your card's memory size is misdetected.
look at the driver output to see what it says when initializing.
-memdiff - integer value in Kb,should be nonzero if your card reports
- more memory than it actually has.For instance mine is 192K less than
+
+memdiff - integer value in KB, should be nonzero if your card reports
+ more memory than it actually has. For instance mine is 192K less than
detection says in all three BIOS selectable situations 2M, 4M, 8M.
Only use if your video memory is taken from main memory hence of
- configurable size.Otherwise use memsize.
- If in some modes which barely fit the memory you see garbage at the bottom
- this might help by not letting change to that mode anymore.
+ configurable size. Otherwise use memsize.
+ If in some modes which barely fit the memory you see garbage
+ at the bottom this might help by not letting change to that mode
+ anymore.
nativex - the width in pixels of the flat panel.If you know it (usually 1024
800 or 1280) and it is not what the driver seems to detect use it.
-bpp - bits per pixel (8,16 or 32)
-mode - a mode name like 800x600 (as described in Documentation/fb/modedb.txt)
+bpp - bits per pixel (8,16 or 32)
+mode - a mode name like 800x600-8@75 as described in
+ Documentation/fb/modedb.txt
Using insane values for the above parameters will probably result in driver
misbehaviour so take care(for instance memsize=12345678 or memdiff=23784 or
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 9f73587219e8..09c4a1efb8e3 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -300,14 +300,6 @@ Who: ocfs2-devel@oss.oracle.com
---------------------------
-What: asm/semaphore.h
-When: 2.6.26
-Why: Implementation became generic; users should now include
- linux/semaphore.h instead.
-Who: Matthew Wilcox <willy@linux.intel.com>
-
----------------------------
-
What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
When: June 2009
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 8b22d7d8b991..680fb566b928 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -510,6 +510,7 @@ prototypes:
void (*close)(struct vm_area_struct*);
int (*fault)(struct vm_area_struct*, struct vm_fault *);
int (*page_mkwrite)(struct vm_area_struct *, struct page *);
+ int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);
locking rules:
BKL mmap_sem PageLocked(page)
@@ -517,6 +518,7 @@ open: no yes
close: no yes
fault: no yes
page_mkwrite: no yes no
+access: no yes
->page_mkwrite() is called when a previously read-only page is
about to become writeable. The file system is responsible for
@@ -525,6 +527,11 @@ taking to lock out truncate, the page range should be verified to be
within i_size. The page mapping should also be checked that it is not
NULL.
+ ->access() is called when get_user_pages() fails in
+acces_process_vm(), typically used to debug a process through
+/proc/pid/mem or ptrace. This function is needed only for
+VM_IO | VM_PFNMAP VMAs.
+
================================================================================
Dubious stuff
diff --git a/Documentation/filesystems/bfs.txt b/Documentation/filesystems/bfs.txt
index ea825e178e79..78043d5a8fc3 100644
--- a/Documentation/filesystems/bfs.txt
+++ b/Documentation/filesystems/bfs.txt
@@ -26,11 +26,11 @@ You can simplify mounting by just typing:
this will allocate the first available loopback device (and load loop.o
kernel module if necessary) automatically. If the loopback driver is not
-loaded automatically, make sure that your kernel is compiled with kmod
-support (CONFIG_KMOD) enabled. Beware that umount will not
-deallocate /dev/loopN device if /etc/mtab file on your system is a
-symbolic link to /proc/mounts. You will need to do it manually using
-"-d" switch of losetup(8). Read losetup(8) manpage for more info.
+loaded automatically, make sure that you have compiled the module and
+that modprobe is functioning. Beware that umount will not deallocate
+/dev/loopN device if /etc/mtab file on your system is a symbolic link to
+/proc/mounts. You will need to do it manually using "-d" switch of
+losetup(8). Read losetup(8) manpage for more info.
To create the BFS image under UnixWare you need to find out first which
slice contains it. The command prtvtoc(1M) is your friend:
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 7f268f327d75..8c6384bdfed4 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -296,6 +296,7 @@ Table 1-4: Kernel info in /proc
uptime System uptime
version Kernel version
video bttv info of video resources (2.4)
+ vmallocinfo Show vmalloced areas
..............................................................................
You can, for example, check which interrupts are currently in use and what
@@ -557,6 +558,49 @@ VmallocTotal: total size of vmalloc memory area
VmallocUsed: amount of vmalloc area which is used
VmallocChunk: largest contigious block of vmalloc area which is free
+..............................................................................
+
+vmallocinfo:
+
+Provides information about vmalloced/vmaped areas. One line per area,
+containing the virtual address range of the area, size in bytes,
+caller information of the creator, and optional information depending
+on the kind of area :
+
+ pages=nr number of pages
+ phys=addr if a physical address was specified
+ ioremap I/O mapping (ioremap() and friends)
+ vmalloc vmalloc() area
+ vmap vmap()ed pages
+ user VM_USERMAP area
+ vpages buffer for pages pointers was vmalloced (huge area)
+ N<node>=nr (Only on NUMA kernels)
+ Number of pages allocated on memory node <node>
+
+> cat /proc/vmallocinfo
+0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ...
+ /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
+0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ...
+ /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
+0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f...
+ phys=7fee8000 ioremap
+0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f...
+ phys=7fee7000 ioremap
+0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210
+0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ...
+ /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
+0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ...
+ pages=2 vmalloc N1=2
+0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ...
+ /0x130 [x_tables] pages=4 vmalloc N0=4
+0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ...
+ pages=14 vmalloc N2=14
+0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ...
+ pages=4 vmalloc N1=4
+0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ...
+ pages=2 vmalloc N1=2
+0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ...
+ pages=10 vmalloc N0=10
1.3 IDE devices in /proc/ide
----------------------------
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 7f27b8f840d0..9e9c348275a9 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -248,6 +248,7 @@ The top level sysfs directory looks like:
block/
bus/
class/
+dev/
devices/
firmware/
net/
@@ -274,6 +275,11 @@ fs/ contains a directory for some filesystems. Currently each
filesystem wanting to export attributes must create its own hierarchy
below fs/ (see ./fuse.txt for an example).
+dev/ contains two directories char/ and block/. Inside these two
+directories there are symlinks named <major>:<minor>. These symlinks
+point to the sysfs directory for the given device. /sys/dev provides a
+quick way to lookup the sysfs interface for a device from the result of
+a stat(2) operation.
More information can driver-model specific features can be found in
Documentation/driver-model/.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7432ba98cfec..4328307a875c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -87,7 +87,8 @@ parameter is applicable:
SH SuperH architecture is enabled.
SMP The kernel is an SMP kernel.
SPARC Sparc architecture is enabled.
- SWSUSP Software suspend is enabled.
+ SWSUSP Software suspend (hibernation) is enabled.
+ SUSPEND System suspend states are enabled.
TS Appropriate touchscreen support is enabled.
USB USB support is enabled.
USBHID USB Human Interface Device support is enabled.
@@ -147,10 +148,12 @@ and is between 256 and 4096 characters. It is defined in the file
default: 0
acpi_sleep= [HW,ACPI] Sleep options
- Format: { s3_bios, s3_mode, s3_beep, old_ordering }
+ Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, old_ordering }
See Documentation/power/video.txt for s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
as soon as the kernel's real-mode entry point is called.
+ s4_nohwsig prevents ACPI hardware signature from being
+ used during resume from hibernation.
old_ordering causes the ACPI 1.0 ordering of the _PTS
control method, wrt putting devices into low power
states, to be enforced (the ACPI 2.0 ordering of _PTS is
@@ -774,8 +777,22 @@ and is between 256 and 4096 characters. It is defined in the file
hisax= [HW,ISDN]
See Documentation/isdn/README.HiSax.
- hugepages= [HW,X86-32,IA-64] Maximal number of HugeTLB pages.
- hugepagesz= [HW,IA-64,PPC] The size of the HugeTLB pages.
+ hugepages= [HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
+ hugepagesz= [HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
+ On x86-64 and powerpc, this option can be specified
+ multiple times interleaved with hugepages= to reserve
+ huge pages of different sizes. Valid pages sizes on
+ x86-64 are 2M (when the CPU supports "pse") and 1G
+ (when the CPU supports the "pdpe1gb" cpuinfo flag)
+ Note that 1GB pages can only be allocated at boot time
+ using hugepages= and not freed afterwards.
+ default_hugepagesz=
+ [same as hugepagesz=] The size of the default
+ HugeTLB page size. This is the size represented by
+ the legacy /proc/ hugepages APIs, used for SHM, and
+ default size when mounting hugetlbfs filesystems.
+ Defaults to the default architecture's huge page size
+ if not specified.
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
@@ -1225,6 +1242,14 @@ and is between 256 and 4096 characters. It is defined in the file
mga= [HW,DRM]
+ mminit_loglevel=
+ [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
+ parameter allows control of the logging verbosity for
+ the additional memory initialisation checks. A value
+ of 0 disables mminit logging and a level of 4 will
+ log everything. Information is printed at KERN_DEBUG
+ so loglevel=8 may also need to be specified.
+
mousedev.tap_time=
[MOUSE] Maximum time between finger touching and
leaving touchpad surface for touch to be considered
@@ -2040,6 +2065,9 @@ and is between 256 and 4096 characters. It is defined in the file
snd-ymfpci= [HW,ALSA]
+ softlockup_panic=
+ [KNL] Should the soft-lockup detector generate panics.
+
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/sonypi.txt
@@ -2104,6 +2132,12 @@ and is between 256 and 4096 characters. It is defined in the file
tdfx= [HW,DRM]
+ test_suspend= [SUSPEND]
+ Specify "mem" (for Suspend-to-RAM) or "standby" (for
+ standby suspend) as the system sleep state to briefly
+ enter during system startup. The system is woken from
+ this state using a wakeup-capable RTC alarm.
+
thash_entries= [KNL,NET]
Set number of hash buckets for TCP connection
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 64b3f146e4b0..02dc748b76c4 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
ThinkPad ACPI Extras Driver
- Version 0.20
- April 09th, 2008
+ Version 0.21
+ May 29th, 2008
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -621,7 +621,8 @@ Bluetooth
---------
procfs: /proc/acpi/ibm/bluetooth
-sysfs device attribute: bluetooth_enable
+sysfs device attribute: bluetooth_enable (deprecated)
+sysfs rfkill class: switch "tpacpi_bluetooth_sw"
This feature shows the presence and current state of a ThinkPad
Bluetooth device in the internal ThinkPad CDC slot.
@@ -643,8 +644,12 @@ Sysfs notes:
0: disables Bluetooth / Bluetooth is disabled
1: enables Bluetooth / Bluetooth is enabled.
- Note: this interface will be probably be superseded by the
- generic rfkill class, so it is NOT to be considered stable yet.
+ Note: this interface has been superseded by the generic rfkill
+ class. It has been deprecated, and it will be removed in year
+ 2010.
+
+ rfkill controller switch "tpacpi_bluetooth_sw": refer to
+ Documentation/rfkill.txt for details.
Video output control -- /proc/acpi/ibm/video
--------------------------------------------
@@ -1374,7 +1379,8 @@ EXPERIMENTAL: WAN
-----------------
procfs: /proc/acpi/ibm/wan
-sysfs device attribute: wwan_enable
+sysfs device attribute: wwan_enable (deprecated)
+sysfs rfkill class: switch "tpacpi_wwan_sw"
This feature is marked EXPERIMENTAL because the implementation
directly accesses hardware registers and may not work as expected. USE
@@ -1404,8 +1410,12 @@ Sysfs notes:
0: disables WWAN card / WWAN card is disabled
1: enables WWAN card / WWAN card is enabled.
- Note: this interface will be probably be superseded by the
- generic rfkill class, so it is NOT to be considered stable yet.
+ Note: this interface has been superseded by the generic rfkill
+ class. It has been deprecated, and it will be removed in year
+ 2010.
+
+ rfkill controller switch "tpacpi_wwan_sw": refer to
+ Documentation/rfkill.txt for details.
Multiple Commands, Module Parameters
------------------------------------
diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 61b171cf5313..2df71861e578 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -513,21 +513,11 @@ Additional Configurations
Intel(R) PRO/1000 PT Dual Port Server Connection
Intel(R) PRO/1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 PF Dual Port Server Adapter
- Intel(R) PRO/1000 PT Quad Port Server Adapter
+ Intel(R) PRO/1000 PT Quad Port Server Adapter
NAPI
----
- NAPI (Rx polling mode) is supported in the e1000 driver. NAPI is enabled
- or disabled based on the configuration of the kernel. To override
- the default, use the following compile-time flags.
-
- To enable NAPI, compile the driver module, passing in a configuration option:
-
- make CFLAGS_EXTRA=-DE1000_NAPI install
-
- To disable NAPI, compile the driver module, passing in a configuration option:
-
- make CFLAGS_EXTRA=-DE1000_NO_NAPI install
+ NAPI (Rx polling mode) is enabled in the e1000 driver.
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
diff --git a/Documentation/networking/udplite.txt b/Documentation/networking/udplite.txt
index 3870f280280b..855d8da57a23 100644
--- a/Documentation/networking/udplite.txt
+++ b/Documentation/networking/udplite.txt
@@ -148,7 +148,7 @@
getsockopt(sockfd, SOL_SOCKET, SO_NO_CHECK, &value, ...);
is meaningless (as in TCP). Packets with a zero checksum field are
- illegal (cf. RFC 3828, sec. 3.1) will be silently discarded.
+ illegal (cf. RFC 3828, sec. 3.1) and will be silently discarded.
4) Fragmentation
diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX
index a55d7f1c836d..fb742c213c9e 100644
--- a/Documentation/power/00-INDEX
+++ b/Documentation/power/00-INDEX
@@ -1,5 +1,7 @@
00-INDEX
- This file
+apm-acpi.txt
+ - basic info about the APM and ACPI support.
basic-pm-debugging.txt
- Debugging suspend and resume
devices.txt
@@ -14,8 +16,6 @@ notifiers.txt
- Registering suspend notifiers in device drivers
pci.txt
- How the PCI Subsystem Does Power Management
-pm.txt
- - info on Linux power management support.
pm_qos_interface.txt
- info on Linux PM Quality of Service interface
power_supply_class.txt
diff --git a/Documentation/power/apm-acpi.txt b/Documentation/power/apm-acpi.txt
new file mode 100644
index 000000000000..1bd799dc17e8
--- /dev/null
+++ b/Documentation/power/apm-acpi.txt
@@ -0,0 +1,32 @@
+APM or ACPI?
+------------
+If you have a relatively recent x86 mobile, desktop, or server system,
+odds are it supports either Advanced Power Management (APM) or
+Advanced Configuration and Power Interface (ACPI). ACPI is the newer
+of the two technologies and puts power management in the hands of the
+operating system, allowing for more intelligent power management than
+is possible with BIOS controlled APM.
+
+The best way to determine which, if either, your system supports is to
+build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is
+enabled by default). If a working ACPI implementation is found, the
+ACPI driver will override and disable APM, otherwise the APM driver
+will be used.
+
+No, sorry, you cannot have both ACPI and APM enabled and running at
+once. Some people with broken ACPI or broken APM implementations
+would like to use both to get a full set of working features, but you
+simply cannot mix and match the two. Only one power management
+interface can be in control of the machine at once. Think about it..
+
+User-space Daemons
+------------------
+Both APM and ACPI rely on user-space daemons, apmd and acpid
+respectively, to be completely functional. Obtain both of these
+daemons from your Linux distribution or from the Internet (see below)
+and be sure that they are started sometime in the system boot process.
+Go ahead and start both. If ACPI or APM is not available on your
+system the associated daemon will exit gracefully.
+
+ apmd: http://worldvisions.ca/~apenwarr/apmd/
+ acpid: http://acpid.sf.net/
diff --git a/Documentation/power/pm.txt b/Documentation/power/pm.txt
deleted file mode 100644
index be841507e43f..000000000000
--- a/Documentation/power/pm.txt
+++ /dev/null
@@ -1,257 +0,0 @@
- Linux Power Management Support
-
-This document briefly describes how to use power management with your
-Linux system and how to add power management support to Linux drivers.
-
-APM or ACPI?
-------------
-If you have a relatively recent x86 mobile, desktop, or server system,
-odds are it supports either Advanced Power Management (APM) or
-Advanced Configuration and Power Interface (ACPI). ACPI is the newer
-of the two technologies and puts power management in the hands of the
-operating system, allowing for more intelligent power management than
-is possible with BIOS controlled APM.
-
-The best way to determine which, if either, your system supports is to
-build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is
-enabled by default). If a working ACPI implementation is found, the
-ACPI driver will override and disable APM, otherwise the APM driver
-will be used.
-
-No, sorry, you cannot have both ACPI and APM enabled and running at
-once. Some people with broken ACPI or broken APM implementations
-would like to use both to get a full set of working features, but you
-simply cannot mix and match the two. Only one power management
-interface can be in control of the machine at once. Think about it..
-
-User-space Daemons
-------------------
-Both APM and ACPI rely on user-space daemons, apmd and acpid
-respectively, to be completely functional. Obtain both of these
-daemons from your Linux distribution or from the Internet (see below)
-and be sure that they are started sometime in the system boot process.
-Go ahead and start both. If ACPI or APM is not available on your
-system the associated daemon will exit gracefully.
-
- apmd: http://worldvisions.ca/~apenwarr/apmd/
- acpid: http://acpid.sf.net/
-
-Driver Interface -- OBSOLETE, DO NOT USE!
-----------------*************************
-
-Note: pm_register(), pm_access(), pm_dev_idle() and friends are
-obsolete. Please do not use them. Instead you should properly hook
-your driver into the driver model, and use its suspend()/resume()
-callbacks to do this kind of stuff.
-
-If you are writing a new driver or maintaining an old driver, it
-should include power management support. Without power management
-support, a single driver may prevent a system with power management
-capabilities from ever being able to suspend (safely).
-
-Overview:
-1) Register each instance of a device with "pm_register"
-2) Call "pm_access" before accessing the hardware.
- (this will ensure that the hardware is awake and ready)
-3) Your "pm_callback" is called before going into a
- suspend state (ACPI D1-D3) or after resuming (ACPI D0)
- from a suspend.
-4) Call "pm_dev_idle" when the device is not being used
- (optional but will improve device idle detection)
-5) When unloaded, unregister the device with "pm_unregister"
-
-/*
- * Description: Register a device with the power-management subsystem
- *
- * Parameters:
- * type - device type (PCI device, system device, ...)
- * id - instance number or unique identifier
- * cback - request handler callback (suspend, resume, ...)
- *
- * Returns: Registered PM device or NULL on error
- *
- * Examples:
- * dev = pm_register(PM_SYS_DEV, PM_SYS_VGA, vga_callback);
- *
- * struct pci_dev *pci_dev = pci_find_dev(...);
- * dev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), callback);
- */
-struct pm_dev *pm_register(pm_dev_t type, unsigned long id, pm_callback cback);
-
-/*
- * Description: Unregister a device with the power management subsystem
- *
- * Parameters:
- * dev - PM device previously returned from pm_register
- */
-void pm_unregister(struct pm_dev *dev);
-
-/*
- * Description: Unregister all devices with a matching callback function
- *
- * Parameters:
- * cback - previously registered request callback
- *
- * Notes: Provided for easier porting from old APM interface
- */
-void pm_unregister_all(pm_callback cback);
-
-/*
- * Power management request callback
- *
- * Parameters:
- * dev - PM device previously returned from pm_register
- * rqst - request type
- * data - data, if any, associated with the request
- *
- * Returns: 0 if the request is successful
- * EINVAL if the request is not supported
- * EBUSY if the device is now busy and cannot handle the request
- * ENOMEM if the device was unable to handle the request due to memory
- *
- * Details: The device request callback will be called before the
- * device/system enters a suspend state (ACPI D1-D3) or
- * or after the device/system resumes from suspend (ACPI D0).
- * For PM_SUSPEND, the ACPI D-state being entered is passed
- * as the "data" argument to the callback. The device
- * driver should save (PM_SUSPEND) or restore (PM_RESUME)
- * device context when the request callback is called.
- *
- * Once a driver returns 0 (success) from a suspend
- * request, it should not process any further requests or
- * access the device hardware until a call to "pm_access" is made.
- */
-typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
-
-Driver Details
---------------
-This is just a quick Q&A as a stopgap until a real driver writers'
-power management guide is available.
-
-Q: When is a device suspended?
-
-Devices can be suspended based on direct user request (eg. laptop lid
-closes), system power policy (eg. sleep after 30 minutes of console
-inactivity), or device power policy (eg. power down device after 5
-minutes of inactivity)
-
-Q: Must a driver honor a suspend request?
-
-No, a driver can return -EBUSY from a suspend request and this
-will stop the system from suspending. When a suspend request
-fails, all suspended devices are resumed and the system continues
-to run. Suspend can be retried at a later time.
-
-Q: Can the driver block suspend/resume requests?
-
-Yes, a driver can delay its return from a suspend or resume
-request until the device is ready to handle requests. It
-is advantageous to return as quickly as possible from a
-request as suspend/resume are done serially.
-
-Q: What context is a suspend/resume initiated from?
-
-A suspend or resume is initiated from a kernel thread context.
-It is safe to block, allocate memory, initiate requests
-or anything else you can do within the kernel.
-
-Q: Will requests continue to arrive after a suspend?
-
-Possibly. It is the driver's responsibility to queue(*),
-fail, or drop any requests that arrive after returning
-success to a suspend request. It is important that the
-driver not access its device until after it receives
-a resume request as the device's bus may no longer
-be active.
-
-(*) If a driver queues requests for processing after
- resume be aware that the device, network, etc.
- might be in a different state than at suspend time.
- It's probably better to drop requests unless
- the driver is a storage device.
-
-Q: Do I have to manage bus-specific power management registers
-
-No. It is the responsibility of the bus driver to manage
-PCI, USB, etc. power management registers. The bus driver
-or the power management subsystem will also enable any
-wake-on functionality that the device has.
-
-Q: So, really, what do I need to do to support suspend/resume?
-
-You need to save any device context that would
-be lost if the device was powered off and then restore
-it at resume time. When ACPI is active, there are
-three levels of device suspend states; D1, D2, and D3.
-(The suspend state is passed as the "data" argument
-to the device callback.) With D3, the device is powered
-off and loses all context, D1 and D2 are shallower power
-states and require less device context to be saved. To
-play it safe, just save everything at suspend and restore
-everything at resume.
-
-Q: Where do I store device context for suspend?
-
-Anywhere in memory, kmalloc a buffer or store it
-in the device descriptor. You are guaranteed that the
-contents of memory will be restored and accessible
-before resume, even when the system suspends to disk.
-
-Q: What do I need to do for ACPI vs. APM vs. etc?
-
-Drivers need not be aware of the specific power management
-technology that is active. They just need to be aware
-of when the overlying power management system requests
-that they suspend or resume.
-
-Q: What about device dependencies?
-
-When a driver registers a device, the power management
-subsystem uses the information provided to build a
-tree of device dependencies (eg. USB device X is on
-USB controller Y which is on PCI bus Z) When power
-management wants to suspend a device, it first sends
-a suspend request to its driver, then the bus driver,
-and so on up to the system bus. Device resumes
-proceed in the opposite direction.
-
-Q: Who do I contact for additional information about
- enabling power management for my specific driver/device?
-
-ACPI Development mailing list: linux-acpi@vger.kernel.org
-
-System Interface -- OBSOLETE, DO NOT USE!
-----------------*************************
-If you are providing new power management support to Linux (ie.
-adding support for something like APM or ACPI), you should
-communicate with drivers through the existing generic power
-management interface.
-
-/*
- * Send a request to all devices
- *
- * Parameters:
- * rqst - request type
- * data - data, if any, associated with the request
- *
- * Returns: 0 if the request is successful
- * See "pm_callback" return for errors
- *
- * Details: Walk list of registered devices and call pm_send
- * for each until complete or an error is encountered.
- * If an error is encountered for a suspend request,
- * return all devices to the state they were in before
- * the suspend request.
- */
-int pm_send_all(pm_request_t rqst, void *data);
-
-/*
- * Find a matching device
- *
- * Parameters:
- * type - device type (PCI device, system device, or 0 to match all devices)
- * from - previous match or NULL to start from the beginning
- *
- * Returns: Matching device or NULL if none found
- */
-struct pm_dev *pm_find(pm_dev_t type, struct pm_dev *from);
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index aee243a846a2..ea1b70b35793 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -89,10 +89,12 @@ Table of Contents
3) OpenPIC Interrupt Controllers
4) ISA Interrupt Controllers
- VIII - Specifying GPIO information for devices
+ IX - Specifying GPIO information for devices
1) gpios property
2) gpio-controller nodes
+ X - Specifying device power management information (sleep property)
+
Appendix A - Sample SOC node for MPC8540
@@ -2488,8 +2490,8 @@ encodings listed below:
2 = high to low edge sensitive type enabled
3 = low to high edge sensitive type enabled
-VIII - Specifying GPIO information for devices
-==============================================
+IX - Specifying GPIO information for devices
+============================================
1) gpios property
-----------------
@@ -2537,116 +2539,151 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
gpio-controller;
};
+X - Specifying Device Power Management Information (sleep property)
+===================================================================
+
+Devices on SOCs often have mechanisms for placing devices into low-power
+states that are decoupled from the devices' own register blocks. Sometimes,
+this information is more complicated than a cell-index property can
+reasonably describe. Thus, each device controlled in such a manner
+may contain a "sleep" property which describes these connections.
+
+The sleep property consists of one or more sleep resources, each of
+which consists of a phandle to a sleep controller, followed by a
+controller-specific sleep specifier of zero or more cells.
+
+The semantics of what type of low power modes are possible are defined
+by the sleep controller. Some examples of the types of low power modes
+that may be supported are:
+
+ - Dynamic: The device may be disabled or enabled at any time.
+ - System Suspend: The device may request to be disabled or remain
+ awake during system suspend, but will not be disabled until then.
+ - Permanent: The device is disabled permanently (until the next hard
+ reset).
+
+Some devices may share a clock domain with each other, such that they should
+only be suspended when none of the devices are in use. Where reasonable,
+such nodes should be placed on a virtual bus, where the bus has the sleep
+property. If the clock domain is shared among devices that cannot be
+reasonably grouped in this manner, then create a virtual sleep controller
+(similar to an interrupt nexus, except that defining a standardized
+sleep-map should wait until its necessity is demonstrated).
+
Appendix A - Sample SOC node for MPC8540
========================================
-Note that the #address-cells and #size-cells for the SoC node
-in this example have been explicitly listed; these are likely
-not necessary as they are usually the same as the root node.
-
- soc8540@e0000000 {
+ soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
+ compatible = "fsl,mpc8540-ccsr", "simple-bus";
device_type = "soc";
- ranges = <00000000 e0000000 00100000>
- reg = <e0000000 00003000>;
+ ranges = <0x00000000 0xe0000000 0x00100000>
bus-frequency = <0>;
-
- mdio@24520 {
- reg = <24520 20>;
- device_type = "mdio";
- compatible = "gianfar";
-
- ethernet-phy@0 {
- linux,phandle = <2452000>
- interrupt-parent = <40000>;
- interrupts = <35 1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
-
- ethernet-phy@1 {
- linux,phandle = <2452001>
- interrupt-parent = <40000>;
- interrupts = <35 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
-
- ethernet-phy@3 {
- linux,phandle = <2452002>
- interrupt-parent = <40000>;
- interrupts = <35 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
-
- };
+ interrupt-parent = <&pic>;
ethernet@24000 {
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "network";
model = "TSEC";
- compatible = "gianfar";
- reg = <24000 1000>;
- mac-address = [ 00 E0 0C 00 73 00 ];
- interrupts = <d 3 e 3 12 3>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>;
+ compatible = "gianfar", "simple-bus";
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ phy-handle = <&phy0>;
+ sleep = <&pmc 00000080>;
+ ranges;
+
+ mdio@24520 {
+ reg = <0x24520 0x20>;
+ compatible = "fsl,gianfar-mdio";
+
+ phy0: ethernet-phy@0 {
+ interrupts = <5 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupts = <5 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+
+ phy3: ethernet-phy@3 {
+ interrupts = <7 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
};
ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
- mac-address = [ 00 E0 0C 00 73 01 ];
- interrupts = <13 3 14 3 18 3>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ reg = <0x25000 0x1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ phy-handle = <&phy1>;
+ sleep = <&pmc 00000040>;
};
ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <0>;
device_type = "network";
model = "FEC";
compatible = "gianfar";
- reg = <26000 1000>;
- mac-address = [ 00 E0 0C 00 73 02 ];
- interrupts = <19 3>;
- interrupt-parent = <40000>;
- phy-handle = <2452002>;
+ reg = <0x26000 0x1000>;
+ local-mac-address = [ 00 E0 0C 00 73 02 ];
+ interrupts = <41 2>;
+ phy-handle = <&phy3>;
+ sleep = <&pmc 00000020>;
};
serial@4500 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <4500 100>;
- clock-frequency = <0>;
- interrupts = <1a 3>;
- interrupt-parent = <40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8540-duart", "simple-bus";
+ sleep = <&pmc 00000002>;
+ ranges;
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ };
};
- pic@40000 {
- linux,phandle = <40000>;
+ pic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
- reg = <40000 40000>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
i2c@3000 {
- interrupt-parent = <40000>;
- interrupts = <1b 3>;
- reg = <3000 18>;
- device_type = "i2c";
+ interrupts = <43 2>;
+ reg = <0x3000 0x100>;
compatible = "fsl-i2c";
dfsrr;
+ sleep = <&pmc 00000004>;
};
+ pmc: power@e0070 {
+ compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc";
+ reg = <0xe0070 0x20>;
+ };
};
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
new file mode 100644
index 000000000000..1815dfede1bc
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
@@ -0,0 +1,38 @@
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+On CPM1 devices, all ports are using slightly different register layouts.
+Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
+
+On CPM2 devices, all ports are 32bit ports and use a common register layout.
+
+Required properties:
+- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b",
+ "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
+ "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional paramters (currently unused).
+- gpio-controller : Marks the port as GPIO controller.
+
+Example of three SOC GPIO banks defined as gpio-controller nodes:
+
+ CPM1_PIO_A: gpio-controller@950 {
+ #gpio-cells = <2>;
+ compatible = "fsl,cpm1-pario-bank-a";
+ reg = <0x950 0x10>;
+ gpio-controller;
+ };
+
+ CPM1_PIO_B: gpio-controller@ab8 {
+ #gpio-cells = <2>;
+ compatible = "fsl,cpm1-pario-bank-b";
+ reg = <0xab8 0x10>;
+ gpio-controller;
+ };
+
+ CPM1_PIO_E: gpio-controller@ac8 {
+ #gpio-cells = <2>;
+ compatible = "fsl,cpm1-pario-bank-e";
+ reg = <0xac8 0x18>;
+ gpio-controller;
+ };
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt
index c8f44d6bcbcf..9ccd5f30405b 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt
@@ -1,22 +1,37 @@
-* USB (Universal Serial Bus Controller)
+Freescale QUICC Engine USB Controller
Required properties:
-- compatible : could be "qe_udc" or "fhci-hcd".
-- mode : the could be "host" or "slave".
-- reg : Offset and length of the register set for the device
-- interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
+- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb".
+- reg : the first two cells should contain usb registers location and
+ length, the next two two cells should contain PRAM location and
+ length.
+- interrupts : should contain USB interrupt.
+- interrupt-parent : interrupt source phandle.
+- fsl,fullspeed-clock : specifies the full speed USB clock source:
+ "none": clock source is disabled
+ "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+ "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+- fsl,lowspeed-clock : specifies the low speed USB clock source:
+ "none": clock source is disabled
+ "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+ "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+- hub-power-budget : USB power budget for the root hub, in mA.
+- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP,
+ USBRN, SPEED (optional), and POWER (optional).
-Example(slave):
- usb@6c0 {
- compatible = "qe_udc";
- reg = <6c0 40>;
- interrupts = <8b 0>;
- interrupt-parent = <700>;
- mode = "slave";
- };
+Example:
+
+usb@6c0 {
+ compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb";
+ reg = <0x6c0 0x40 0x8b00 0x100>;
+ interrupts = <11>;
+ interrupt-parent = <&qeic>;
+ fsl,fullspeed-clock = "clk21";
+ gpios = <&qe_pio_b 2 0 /* USBOE */
+ &qe_pio_b 3 0 /* USBTP */
+ &qe_pio_b 8 0 /* USBTN */
+ &qe_pio_b 9 0 /* USBRP */
+ &qe_pio_b 11 0 /* USBRN */
+ &qe_pio_e 20 0 /* SPEED */
+ &qe_pio_e 21 0 /* POWER */>;
+};
diff --git a/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt b/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt
new file mode 100644
index 000000000000..0f766333b6eb
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt
@@ -0,0 +1,17 @@
+Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU)
+
+Required properties:
+- compatible : "fsl,<mcu-chip>-<board>", "fsl,mcu-mpc8349emitx".
+- reg : should specify I2C address (0x0a).
+- #gpio-cells : should be 2.
+- gpio-controller : should be present.
+
+Example:
+
+mcu@0a {
+ #gpio-cells = <2>;
+ compatible = "fsl,mc9s08qg8-mpc8349emitx",
+ "fsl,mcu-mpc8349emitx";
+ reg = <0x0a>;
+ gpio-controller;
+};
diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
new file mode 100644
index 000000000000..02f6f43ee1b7
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
@@ -0,0 +1,63 @@
+* Power Management Controller
+
+Properties:
+- compatible: "fsl,<chip>-pmc".
+
+ "fsl,mpc8349-pmc" should be listed for any chip whose PMC is
+ compatible. "fsl,mpc8313-pmc" should also be listed for any chip
+ whose PMC is compatible, and implies deep-sleep capability.
+
+ "fsl,mpc8548-pmc" should be listed for any chip whose PMC is
+ compatible. "fsl,mpc8536-pmc" should also be listed for any chip
+ whose PMC is compatible, and implies deep-sleep capability.
+
+ "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
+ compatible; all statements below that apply to "fsl,mpc8548-pmc" also
+ apply to "fsl,mpc8641d-pmc".
+
+ Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these
+ bit assigments are indicated via the sleep specifier in each device's
+ sleep property.
+
+- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
+ is the PMC block, and the second resource is the Clock Configuration
+ block.
+
+ For devices compatible with "fsl,mpc8548-pmc", the first resource
+ is a 32-byte block beginning with DEVDISR.
+
+- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first
+ resource is the PMC block interrupt.
+
+- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices,
+ this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
+ a wakeup source from deep sleep.
+
+Sleep specifiers:
+
+ fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit
+ that is set in the cell, the corresponding bit in SCCR will be saved
+ and cleared on suspend, and restored on resume. This sleep controller
+ supports disabling and resuming devices at any time.
+
+ fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
+ which will be ORed into PMCDR upon suspend, and cleared from PMCDR
+ upon resume. The first two cells are as described for fsl,mpc8578-pmc.
+ This sleep controller only supports disabling devices during system
+ sleep, or permanently.
+
+ fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
+ first of which will be ORed into DEVDISR (and the second into
+ DEVDISR2, if present -- this cell should be zero or absent if the
+ hardware does not have DEVDISR2) upon a request for permanent device
+ disabling. This sleep controller does not support configuring devices
+ to disable during system sleep (unless supported by another compatible
+ match), or dynamically.
+
+Example:
+
+ power@b00 {
+ compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 8>;
+ };
diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
index 583ef6b56c43..cf55fa4112d2 100644
--- a/Documentation/powerpc/dts-bindings/fsl/tsec.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
@@ -24,46 +24,39 @@ Example:
* Gianfar-compatible ethernet nodes
-Required properties:
+Properties:
- device_type : Should be "network"
- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
- compatible : Should be "gianfar"
- reg : Offset and length of the register set for the device
- - mac-address : List of bytes representing the ethernet address of
+ - local-mac-address : List of bytes representing the ethernet address of
this controller
- - interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
+ - interrupts : For FEC devices, the first interrupt is the device's
+ interrupt. For TSEC and eTSEC devices, the first interrupt is
+ transmit, the second is receive, and the third is error.
- phy-handle : The phandle for the PHY connected to this ethernet
controller.
- fixed-link : <a b c d e> where a is emulated phy id - choose any,
but unique to the all specified fixed-links, b is duplex - 0 half,
1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
-
-Recommended properties:
-
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
"tbi", or "rtbi". This property is only really needed if the connection
is of type "rgmii-id", as all other connection types are detected by
hardware.
-
+ - fsl,magic-packet : If present, indicates that the hardware supports
+ waking up via magic packet.
Example:
ethernet@24000 {
- #size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
- mac-address = [ 00 E0 0C 00 73 00 ];
- interrupts = <d 3 e 3 12 3>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>
};
diff --git a/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt
new file mode 100644
index 000000000000..84a04d5eb8e6
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt
@@ -0,0 +1,28 @@
+Freescale Localbus UPM programmed to work with NAND flash
+
+Required properties:
+- compatible : "fsl,upm-nand".
+- reg : should specify localbus chip select and size used for the chip.
+- fsl,upm-addr-offset : UPM pattern offset for the address latch.
+- fsl,upm-cmd-offset : UPM pattern offset for the command latch.
+- gpios : may specify optional GPIO connected to the Ready-Not-Busy pin.
+
+Example:
+
+upm@1,0 {
+ compatible = "fsl,upm-nand";
+ reg = <1 0 1>;
+ fsl,upm-addr-offset = <16>;
+ fsl,upm-cmd-offset = <8>;
+ gpios = <&qe_pio_e 18 0>;
+
+ flash {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "...";
+
+ partition@0 {
+ ...
+ };
+ };
+};
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt
new file mode 100644
index 000000000000..ff51f4c0fa9d
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/led.txt
@@ -0,0 +1,15 @@
+LED connected to GPIO
+
+Required properties:
+- compatible : should be "gpio-led".
+- label : (optional) the label for this LED. If omitted, the label is
+ taken from the node name (excluding the unit address).
+- gpios : should specify LED GPIO.
+
+Example:
+
+led@0 {
+ compatible = "gpio-led";
+ label = "hdd";
+ gpios = <&mcu_pio 0 1>;
+};
diff --git a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl
index c4d2e3507af9..9d644f7e241e 100644
--- a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl
+++ b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl
@@ -42,7 +42,7 @@
<sect1><title>Device Components</title>
!Esound/core/device.c
</sect1>
- <sect1><title>KMOD and Device File Entries</title>
+ <sect1><title>Module requests and Device File Entries</title>
!Esound/core/sound.c
</sect1>
<sect1><title>Memory Management Helpers</title>
diff --git a/Documentation/specialix.txt b/Documentation/specialix.txt
index 4a4b428ce8f6..6eb6f3a3331c 100644
--- a/Documentation/specialix.txt
+++ b/Documentation/specialix.txt
@@ -270,8 +270,8 @@ The pinout of the connectors on the IO8+ is:
Hardware handshaking issues.
============================
-The driver can be compiled in two different ways. The default
-("Specialix DTR/RTS pin is RTS" is off) the pin behaves as DTR when
+The driver can be told to operate in two different ways. The default
+behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when
hardware handshaking is off. It behaves as the RTS hardware
handshaking signal when hardware handshaking is selected.
@@ -280,7 +280,7 @@ cable will either be compatible with hardware handshaking or with
software handshaking. So switching on the fly is not really an
option.
-I actually prefer to use the "Specialix DTR/RTS pin is RTS" option.
+I actually prefer to use the "specialix.sx_rtscts=1" option.
This makes the DTR/RTS pin always an RTS pin, and ioctls to
change DTR are always ignored. I have a cable that is configured
for this.
@@ -379,7 +379,5 @@ it doesn't fit in your computer, bring back the card.
You have to WRITE to the address register to even
read-probe a CD186x register. Disable autodetection?
-- Specialix: any suggestions?
- - Arbitrary baud rates are not implemented yet.
- If you need this, bug me about it.
diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt
index 80ef562160bb..6049a2a84dda 100644
--- a/Documentation/sysfs-rules.txt
+++ b/Documentation/sysfs-rules.txt
@@ -3,9 +3,8 @@ Rules on how to access information in the Linux kernel sysfs
The kernel-exported sysfs exports internal kernel implementation details
and depends on internal kernel structures and layout. It is agreed upon
by the kernel developers that the Linux kernel does not provide a stable
-internal API. As sysfs is a direct export of kernel internal
-structures, the sysfs interface cannot provide a stable interface either;
-it may always change along with internal kernel changes.
+internal API. Therefore, there are aspects of the sysfs interface that
+may not be stable across kernel releases.
To minimize the risk of breaking users of sysfs, which are in most cases
low-level userspace applications, with a new kernel release, the users
diff --git a/Documentation/telephony/ixj.txt b/Documentation/telephony/ixj.txt
index 621024fd3a18..44d124005bad 100644
--- a/Documentation/telephony/ixj.txt
+++ b/Documentation/telephony/ixj.txt
@@ -305,21 +305,14 @@ driver, like this:
which will result in the needed drivers getting loaded automatically.
- g. if you are planning on using kerneld to automatically load the
-module for you, then you need to edit /etc/conf.modules and add the
+ g. if you are planning on having the kernel automatically request
+the module for you, then you need to edit /etc/conf.modules and add the
following lines:
options ixj dspio=0x340 xio=0x330 ixjdebug=0
If you do this, then when you execute an application that uses the
-module kerneld will load the module for you. Note that to do this,
-you need to have your kernel set to support kerneld. You can check
-for this by looking at /usr/src/linux/.config and you should see this:
-
- # Loadable module support
- #
- <snip>
- CONFIG_KMOD=y
+module the kernel will request that it is loaded.
h. if you want non-root users to be able to read and write to the
ixj devices (this is a good idea!) you should do the following:
diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt
index e0bba8393c77..05138e8aea07 100644
--- a/Documentation/video4linux/w9968cf.txt
+++ b/Documentation/video4linux/w9968cf.txt
@@ -193,9 +193,6 @@ Description: Automatic 'ovcamchip' module loading: 0 disabled, 1 enabled.
loads that module automatically. This action is performed as
once soon as the 'w9968cf' module is loaded into memory.
Default: 1
-Note: The kernel must be compiled with the CONFIG_KMOD option
- enabled for the 'ovcamchip' module to be loaded and for
- this parameter to be present.
-------------------------------------------------------------------------------
Name: simcams
Type: int
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index 3102b81bef88..8a5b5763f0fe 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -95,6 +95,29 @@ this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
+With support for multiple hugepage pools at run-time available, much of
+the hugepage userspace interface has been duplicated in sysfs. The above
+information applies to the default hugepage size (which will be
+controlled by the proc interfaces for backwards compatibility). The root
+hugepage control directory is
+
+ /sys/kernel/mm/hugepages
+
+For each hugepage size supported by the running kernel, a subdirectory
+will exist, of the form
+
+ hugepages-${size}kB
+
+Inside each of these directories, the same set of files will exist:
+
+ nr_hugepages
+ nr_overcommit_hugepages
+ free_hugepages
+ resv_hugepages
+ surplus_hugepages
+
+which function as described above for the default hugepage-sized case.
+
If the user applications are going to request hugepages using mmap system
call, then it is required that system administrator mount a file system of
type hugetlbfs: