diff options
Diffstat (limited to 'Documentation')
29 files changed, 827 insertions, 701 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 97fb96266344..6423377710ee 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -167,6 +167,7 @@ properties: - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC items: - enum: + - bananapi,bpi-m5 - hardkernel,odroid-c4 - hardkernel,odroid-hc4 - khadas,vim3l diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml index 812ae8cc5959..230b80d9d6cf 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml @@ -18,6 +18,7 @@ properties: - description: BCM2711 based Boards items: - enum: + - raspberrypi,400 - raspberrypi,4-model-b - const: brcm,bcm2711 diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index e3c50f231d71..1c827c1954dc 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -197,6 +197,7 @@ properties: - boundary,imx6q-nitrogen6x - compulab,cm-fx6 # CompuLab CM-FX6 - dmo,imx6q-edmqmx6 # Data Modul eDM-QMX6 Board + - ds,imx6q-sbc # Da Sheng COM-9XX Modules - embest,imx6q-marsboard # Embest MarS Board i.MX6Dual - emtrion,emcon-mx6 # emCON-MX6D or emCON-MX6Q SoM - emtrion,emcon-mx6-avari # emCON-MX6D or emCON-MX6Q SoM on Avari Base @@ -400,6 +401,17 @@ properties: - const: armadeus,imx6dl-apf6 # APF6 (Solo) SoM - const: fsl,imx6dl + - description: i.MX6DL based congatec QMX6 Boards + items: + - enum: + - ge,imx6dl-b105v2 # General Electric B105v2 + - ge,imx6dl-b105pv2 # General Electric B105Pv2 + - ge,imx6dl-b125v2 # General Electric B125v2 + - ge,imx6dl-b125pv2 # General Electric B125Pv2 + - ge,imx6dl-b155v2 # General Electric B155v2 + - const: congatec,qmx6 + - const: fsl,imx6dl + - description: i.MX6DL based DFI FS700-M60-6DL Board items: - const: dfi,fs700-m60-6dl @@ -685,6 +697,7 @@ properties: - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit + - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - const: fsl,imx8mm diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml index d72e92bdf7c1..230bffeec0e5 100644 --- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml +++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml @@ -17,6 +17,7 @@ properties: - items: - enum: - linksys,nslu2 + - welltech,epbx100 - const: intel,ixp42x - items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index aff57a8c8c30..80a05f6fee85 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -122,6 +122,10 @@ properties: - enum: - mediatek,mt8195-evb - const: mediatek,mt8195 + - description: Google Burnet (HP Chromebook x360 11MK G3 EE) + items: + - const: google,burnet + - const: mediatek,mt8183 - description: Google Krane (Lenovo IdeaPad Duet, 10e,...) items: - enum: @@ -133,9 +137,19 @@ properties: items: - const: google,damu - const: mediatek,mt8183 - - description: Google Juniper (Acer Chromebook Spin 311) + - description: Google Fennel (Lenovo IdeaPad 3 Chromebook) + items: + - enum: + - google,fennel-sku0 + - google,fennel-sku1 + - google,fennel-sku6 + - const: google,fennel + - const: mediatek,mt8183 + - description: Google Juniper (Acer Chromebook Spin 311) / Kenzo (Acer Chromebook 311) items: - - const: google,juniper-sku16 + - enum: + - google,juniper-sku16 + - google,juniper-sku17 - const: google,juniper - const: mediatek,mt8183 - description: Google Kakadu (ASUS Chromebook Detachable CM3) @@ -144,6 +158,10 @@ properties: - const: google,kakadu-rev2 - const: google,kakadu - const: mediatek,mt8183 + - description: Google Kappa (HP Chromebook 11a) + items: + - const: google,kappa + - const: mediatek,mt8183 - description: Google Kodama (Lenovo 10e Chromebook Tablet) items: - enum: @@ -153,6 +171,13 @@ properties: - google,kodama-sku32 - const: google,kodama - const: mediatek,mt8183 + - description: Google Willow (Acer Chromebook 311 C722/C722T) + items: + - enum: + - google,willow-sku0 + - google,willow-sku1 + - const: google,willow + - const: mediatek,mt8183 - items: - enum: - mediatek,mt8183-pumpkin diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 9b27e991bddc..9720b00c41d2 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -36,17 +36,20 @@ description: | msm8992 msm8994 msm8996 + sa8155p sc7180 sc7280 sdm630 sdm660 sdm845 sdx55 + sm8150 sm8250 sm8350 The 'board' element must be one of the following strings: + adp cdp cp01-c1 dragonboard @@ -178,6 +181,7 @@ properties: - items: - enum: - qcom,sc7280-idp + - google,senor - const: qcom,sc7280 - items: @@ -200,6 +204,16 @@ properties: - items: - enum: + - qcom,sa8155p-adp + - const: qcom,sa8155p + + - items: + - enum: + - qcom,sm8150-mtp + - const: qcom,sm8150 + + - items: + - enum: - qcom,qrb5165-rb5 - qcom,sm8250-mtp - const: qcom,sm8250 diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 5fd0696a9f91..a0cce4e25039 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -302,6 +302,24 @@ properties: - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) - const: renesas,r9a06g032 + - description: RZ/G2UL (R9A07G043) + items: + - enum: + - renesas,r9a07g043u11 # RZ/G2UL Type-1 + - renesas,r9a07g043u12 # RZ/G2UL Type-2 + - const: renesas,r9a07g043 + + - description: RZ/G2{L,LC} (R9A07G044) + items: + - enum: + - renesas,smarc-evk # SMARC EVK + - enum: + - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC + - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC + - renesas,r9a07g044l1 # Single Cortex-A55 RZ/G2L + - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L + - const: renesas,r9a07g044 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 4a6f772c1043..6546b015fc62 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -600,6 +600,11 @@ properties: - const: zkmagic,a95x-z2 - const: rockchip,rk3318 + - description: Rockchip RK3568 Evaluation board + items: + - const: rockchip,rk3568-evb1-v10 + - const: rockchip,rk3568 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index ac750025a2eb..889128acf49a 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -224,6 +224,12 @@ properties: - const: empire-electronix,m712 - const: allwinner,sun5i-a13 + - description: Forlinx OKA40i-C Development board + items: + - const: forlinx,oka40i-c + - const: forlinx,feta40i-c + - const: allwinner,sun8i-r40 + - description: FriendlyARM NanoPi A64 items: - const: friendlyarm,nanopi-a64 @@ -269,6 +275,11 @@ properties: - const: friendlyarm,nanopi-r1 - const: allwinner,sun8i-h3 + - description: FriendlyARM NanoPi R1S H5 + items: + - const: friendlyarm,nanopi-r1s-h5 + - const: allwinner,sun50i-h5 + - description: FriendlyARM ZeroPi items: - const: friendlyarm,zeropi diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index 43fd2f8927d0..0afec83cc723 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -301,6 +301,33 @@ patternProperties: additionalProperties: false + core-domain: + type: object + description: | + The vast majority of hardware blocks of Tegra SoC belong to a + Core power domain, which has a dedicated voltage rail that powers + the blocks. + + properties: + operating-points-v2: + description: + Should contain level, voltages and opp-supported-hw property. + The supported-hw is a bitfield indicating SoC speedo or process + ID mask. + + "#power-domain-cells": + const: 0 + + required: + - operating-points-v2 + - "#power-domain-cells" + + additionalProperties: false + + core-supply: + description: + Phandle to voltage regulator connected to the SoC Core power rail. + required: - compatible - reg @@ -325,6 +352,7 @@ examples: tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra210-pmc"; reg = <0x7000e400 0x400>; + core-supply = <®ulator>; clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; #clock-cells = <1>; @@ -338,17 +366,24 @@ examples: nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + pd_core: core-domain { + operating-points-v2 = <&core_opp_table>; + #power-domain-cells = <0>; + }; + powergates { pd_audio: aud { clocks = <&tegra_car TEGRA210_CLK_APE>, <&tegra_car TEGRA210_CLK_APB2APE>; resets = <&tegra_car 198>; + power-domains = <&pd_core>; #power-domain-cells = <0>; }; pd_xusbss: xusba { clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; + power-domains = <&pd_core>; #power-domain-cells = <0>; }; }; diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt deleted file mode 100644 index ab730ea0a560..000000000000 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ /dev/null @@ -1,313 +0,0 @@ -Broadcom iProc Family Clocks - -This binding uses the common clock binding: - Documentation/devicetree/bindings/clock/clock-bindings.txt - -The iProc clock controller manages clocks that are common to the iProc family. -An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL, -LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL -comprises of several leaf clocks - -Required properties for a PLL and its leaf clocks: - -- compatible: - Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on -Cygnus has a compatible string of "brcm,cygnus-genpll" - -- #clock-cells: - Have a value of <1> since there are more than 1 leaf clock of a given PLL - -- reg: - Define the base and range of the I/O address space that contain the iProc -clock control registers required for the PLL - -- clocks: - The input parent clock phandle for the PLL. For most iProc PLLs, this is an -onboard crystal with a fixed rate - -- clock-output-names: - An ordered list of strings defining the names of the clocks - -Example: - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - genpll: genpll { - #clock-cells = <1>; - compatible = "brcm,cygnus-genpll"; - reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; - clocks = <&osc>; - clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", - "enet_sw", "audio_125", "can"; - }; - -Required properties for ASIU clocks: - -ASIU clocks are a special case. These clocks are derived directly from the -reference clock of the onboard crystal - -- compatible: - Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU -clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk" - -- #clock-cells: - Have a value of <1> since there are more than 1 ASIU clocks - -- reg: - Define the base and range of the I/O address space that contain the iProc -clock control registers required for ASIU clocks - -- clocks: - The input parent clock phandle for the ASIU clock, i.e., the onboard -crystal - -- clock-output-names: - An ordered list of strings defining the names of the ASIU clocks - -Example: - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - asiu_clks: asiu_clks { - #clock-cells = <1>; - compatible = "brcm,cygnus-asiu-clk"; - reg = <0x0301d048 0xc>, <0x180aa024 0x4>; - clocks = <&osc>; - clock-output-names = "keypad", "adc/touch", "pwm"; - }; - -Cygnus ------- -PLL and leaf clock compatible strings for Cygnus are: - "brcm,cygnus-armpll" - "brcm,cygnus-genpll" - "brcm,cygnus-lcpll0" - "brcm,cygnus-mipipll" - "brcm,cygnus-asiu-clk" - "brcm,cygnus-audiopll" - -The following table defines the set of PLL/clock index and ID for Cygnus. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-cygnus.h" - - Clock Source (Parent) Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK - adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK - pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK - - genpll crystal 0 BCM_CYGNUS_GENPLL - axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK - 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK - ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK - enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK - audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK - can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK - - lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 - pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK - ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK - sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK - usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK - smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK - ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED - - mipipll crystal 0 BCM_CYGNUS_MIPIPLL - ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED - ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD - ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D - ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED - ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED - ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED - - audiopll crystal 0 BCM_CYGNUS_AUDIOPLL - ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0 - ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 - ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 - -Hurricane 2 ------- -PLL and leaf clock compatible strings for Hurricane 2 are: - "brcm,hr2-armpll" - -The following table defines the set of PLL/clock for Hurricane 2: - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - -Northstar and Northstar Plus ------- -PLL and leaf clock compatible strings for Northstar and Northstar Plus are: - "brcm,nsp-armpll" - "brcm,nsp-genpll" - "brcm,nsp-lcpll0" - -The following table defines the set of PLL/clock index and ID for Northstar and -Northstar Plus. These clock IDs are defined in: - "include/dt-bindings/clock/bcm-nsp.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - genpll crystal 0 BCM_NSP_GENPLL - phy genpll 1 BCM_NSP_GENPLL_PHY_CLK - ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK - usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK - iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK - sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK - sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK - - lcpll0 crystal 0 BCM_NSP_LCPLL0 - pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK - sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK - ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK - -Northstar 2 ------------ -PLL and leaf clock compatible strings for Northstar 2 are: - "brcm,ns2-genpll-scr" - "brcm,ns2-genpll-sw" - "brcm,ns2-lcpll-ddr" - "brcm,ns2-lcpll-ports" - -The following table defines the set of PLL/clock index and ID for Northstar 2. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-ns2.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - genpll_scr crystal 0 BCM_NS2_GENPLL_SCR - scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK - fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK - audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK - ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED - ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED - ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED - - genpll_sw crystal 0 BCM_NS2_GENPLL_SW - rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK - 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK - nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK - chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK - port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK - sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK - - lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR - pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK - ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK - ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED - ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED - ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED - ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED - - lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS - wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK - rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK - ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED - ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED - ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED - ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED - -BCM63138 --------- -PLL and leaf clock compatible strings for BCM63138 are: - "brcm,bcm63138-armpll" - -Stingray ------------ -PLL and leaf clock compatible strings for Stingray are: - "brcm,sr-genpll0" - "brcm,sr-genpll1" - "brcm,sr-genpll2" - "brcm,sr-genpll3" - "brcm,sr-genpll4" - "brcm,sr-genpll5" - "brcm,sr-genpll6" - - "brcm,sr-lcpll0" - "brcm,sr-lcpll1" - "brcm,sr-lcpll-pcie" - - -The following table defines the set of PLL/clock index and ID for Stingray. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-sr.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - crmu_ref25m crystal N/A N/A - - genpll0 crystal 0 BCM_SR_GENPLL0 - clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK - clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK - clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK - clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK - clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK - clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK - - genpll1 crystal 0 BCM_SR_GENPLL1 - clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK - clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK - - genpll2 crystal 0 BCM_SR_GENPLL2 - clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK - clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK - clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK - clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK - clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK - clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK - - genpll3 crystal 0 BCM_SR_GENPLL3 - clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK - clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK - - genpll4 crystal 0 BCM_SR_GENPLL4 - clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK - clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK - clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK - clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK - clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK - - genpll5 crystal 0 BCM_SR_GENPLL5 - clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK - clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK - clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK - - genpll6 crystal 0 BCM_SR_GENPLL6 - clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK - - lcpll0 crystal 0 BCM_SR_LCPLL0 - clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK - clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK - clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK - clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK - - lcpll1 crystal 0 BCM_SR_LCPLL1 - clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK - clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK - clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK - - lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE - clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml new file mode 100644 index 000000000000..8dc7b404ee12 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml @@ -0,0 +1,395 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/brcm,iproc-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc Family Clocks + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +description: | + The iProc clock controller manages clocks that are common to the iProc family. + An SoC from the iProc family may have several PLLs, e.g., ARMPLL, GENPLL, + LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL + comprises of several leaf clocks + + ASIU clocks are a special case. These clocks are derived directly from the + reference clock of the onboard crystal. + +properties: + compatible: + enum: + - brcm,bcm63138-armpll + - brcm,cygnus-armpll + - brcm,cygnus-genpll + - brcm,cygnus-lcpll0 + - brcm,cygnus-mipipll + - brcm,cygnus-asiu-clk + - brcm,cygnus-audiopll + - brcm,hr2-armpll + - brcm,nsp-armpll + - brcm,nsp-genpll + - brcm,nsp-lcpll0 + - brcm,ns2-genpll-scr + - brcm,ns2-genpll-sw + - brcm,ns2-lcpll-ddr + - brcm,ns2-lcpll-ports + - brcm,sr-genpll0 + - brcm,sr-genpll1 + - brcm,sr-genpll2 + - brcm,sr-genpll3 + - brcm,sr-genpll4 + - brcm,sr-genpll5 + - brcm,sr-genpll6 + - brcm,sr-lcpll0 + - brcm,sr-lcpll1 + - brcm,sr-lcpll-pcie + + reg: + minItems: 1 + maxItems: 3 + items: + - description: base register + - description: power register + - description: ASIU or split status register + + clocks: + description: The input parent clock phandle for the PLL / ASIU clock. For + most iProc PLLs, this is an onboard crystal with a fixed rate. + maxItems: 1 + + '#clock-cells': + const: 1 + + clock-output-names: + minItems: 1 + maxItems: 45 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - brcm,cygnus-armpll + - brcm,cygnus-genpll + - brcm,cygnus-lcpll0 + - brcm,cygnus-mipipll + - brcm,cygnus-asiu-clk + - brcm,cygnus-audiopll + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Cygnus. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-cygnus.h" + + Clock Source (Parent) Index ID + ----- --------------- ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK + adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK + pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK + + genpll crystal 0 BCM_CYGNUS_GENPLL + axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK + 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK + ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK + enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK + audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK + can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK + + lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 + pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK + ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK + sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK + usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK + smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK + ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED + + mipipll crystal 0 BCM_CYGNUS_MIPIPLL + ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED + ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD + ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D + ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED + ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED + ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED + + audiopll crystal 0 BCM_CYGNUS_AUDIOPLL + ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0 + ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 + ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 + - if: + properties: + compatible: + contains: + enum: + - brcm,hr2-armpll + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock for Hurricane 2: + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + - if: + properties: + compatible: + contains: + enum: + - brcm,nsp-armpll + - brcm,nsp-genpll + - brcm,nsp-lcpll0 + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Northstar and + Northstar Plus. These clock IDs are defined in: + "include/dt-bindings/clock/bcm-nsp.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + genpll crystal 0 BCM_NSP_GENPLL + phy genpll 1 BCM_NSP_GENPLL_PHY_CLK + ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK + usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK + iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK + sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK + sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK + + lcpll0 crystal 0 BCM_NSP_LCPLL0 + pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK + sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK + ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK + - if: + properties: + compatible: + contains: + enum: + - brcm,ns2-genpll-scr + - brcm,ns2-genpll-sw + - brcm,ns2-lcpll-ddr + - brcm,ns2-lcpll-ports + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Northstar 2. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-ns2.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + genpll_scr crystal 0 BCM_NS2_GENPLL_SCR + scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK + fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK + audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK + ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED + ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED + ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED + + genpll_sw crystal 0 BCM_NS2_GENPLL_SW + rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK + 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK + nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK + chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK + port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK + sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK + + lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR + pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK + ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK + ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED + ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED + ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED + ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED + + lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS + wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK + rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK + ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED + ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED + ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED + ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED + - if: + properties: + compatible: + contains: + enum: + - brcm,sr-genpll0 + - brcm,sr-genpll1 + - brcm,sr-genpll2 + - brcm,sr-genpll3 + - brcm,sr-genpll4 + - brcm,sr-genpll5 + - brcm,sr-genpll6 + - brcm,sr-lcpll0 + - brcm,sr-lcpll1 + - brcm,sr-lcpll-pcie + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Stingray. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-sr.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + crmu_ref25m crystal N/A N/A + + genpll0 crystal 0 BCM_SR_GENPLL0 + clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK + clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK + clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK + clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK + clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK + clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK + + genpll1 crystal 0 BCM_SR_GENPLL1 + clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK + clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK + + genpll2 crystal 0 BCM_SR_GENPLL2 + clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK + clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK + clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK + clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK + clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK + clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK + + genpll3 crystal 0 BCM_SR_GENPLL3 + clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK + clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK + + genpll4 crystal 0 BCM_SR_GENPLL4 + clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK + clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK + clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK + clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK + clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK + + genpll5 crystal 0 BCM_SR_GENPLL5 + clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK + clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK + clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK + + genpll6 crystal 0 BCM_SR_GENPLL6 + clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK + + lcpll0 crystal 0 BCM_SR_LCPLL0 + clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK + clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK + clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK + clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK + + lcpll1 crystal 0 BCM_SR_LCPLL1 + clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK + clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK + clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK + + lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE + clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK + - if: + properties: + compatible: + contains: + const: brcm,cygnus-genpll + then: + properties: + clock-output-names: + items: + - const: genpll + - const: axi21 + - const: 250mhz + - const: ihost_sys + - const: enet_sw + - const: audio_125 + - const: can + - if: + properties: + compatible: + contains: + const: brcm,nsp-lcpll0 + then: + properties: + clock-output-names: + items: + - const: lcpll0 + - const: pcie_phy + - const: sdio + - const: ddr_phy + - if: + properties: + compatible: + contains: + const: brcm,nsp-genpll + then: + properties: + clock-output-names: + items: + - const: genpll + - const: phy + - const: ethernetclk + - const: usbclk + - const: iprocfast + - const: sata1 + - const: sata2 + +required: + - reg + - clocks + - '#clock-cells' + - clock-output-names + +additionalProperties: false + +examples: + - | + osc1: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + genpll@301d000 { + #clock-cells = <1>; + compatible = "brcm,cygnus-genpll"; + reg = <0x301d000 0x2c>, <0x301c020 0x4>; + clocks = <&os1c>; + clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", + "enet_sw", "audio_125", "can"; + }; + - | + osc2: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + asiu_clks@301d048 { + #clock-cells = <1>; + compatible = "brcm,cygnus-asiu-clk"; + reg = <0x301d048 0xc>, <0x180aa024 0x4>; + clocks = <&osc2>; + clock-output-names = "keypad", "adc/touch", "pwm"; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt deleted file mode 100644 index 9acea9d93160..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt +++ /dev/null @@ -1,63 +0,0 @@ -NVIDIA Tegra114 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra114-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in", and the board-specific oscillator "osc". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in header file - <dt-bindings/clock/tegra114-car.h>. -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. - -Example SoC include file: - -/ { - tegra_car: clock { - compatible = "nvidia,tegra114-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA114_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - osc: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k> <&osc>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt deleted file mode 100644 index 7f02fb4ca4ad..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt +++ /dev/null @@ -1,107 +0,0 @@ -NVIDIA Tegra124 and Tegra132 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in", and the board-specific oscillator "osc". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in the header files - <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common - to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h> - (for Tegra124-specific clocks). -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. -- nvidia,external-memory-controller : phandle of the EMC driver. - -The node should contain a "emc-timings" subnode for each supported RAM type (see -field RAM_CODE in register PMC_STRAPPING_OPT_A). - -Required properties for "emc-timings" nodes : -- nvidia,ram-code : Should contain the value of RAM_CODE this timing set - is used for. - -Each "emc-timings" node should contain a "timing" subnode for every supported -EMC clock rate. - -Required properties for "timing" nodes : -- clock-frequency : Should contain the memory clock rate to which this timing -relates. -- nvidia,parent-clock-frequency : Should contain the rate at which the current -parent of the EMC clock should be running at this timing. -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - - emc-parent : the clock that should be the parent of the EMC clock at this -timing. - -Example SoC include file: - -/ { - tegra_car: clock@60006000 { - compatible = "nvidia,tegra124-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - nvidia,external-memory-controller = <&emc>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA124_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - osc: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <112400000>; - }; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k> <&osc>; - }; - - clock@60006000 { - emc-timings-3 { - nvidia,ram-code = <3>; - - timing-12750000 { - clock-frequency = <12750000>; - nvidia,parent-clock-frequency = <408000000>; - clocks = <&tegra_car TEGRA124_CLK_PLL_P>; - clock-names = "emc-parent"; - }; - timing-20400000 { - clock-frequency = <20400000>; - nvidia,parent-clock-frequency = <408000000>; - clocks = <&tegra_car TEGRA124_CLK_PLL_P>; - clock-names = "emc-parent"; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml new file mode 100644 index 000000000000..ec7ab1483652 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nvidia,tegra124-car.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Clock and Reset Controller + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The Clock and Reset (CAR) is the HW module responsible for muxing and gating + Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units. + + CLKGEN provides the registers to program the PLLs. It controls most of + the clock source programming and most of the clock dividers. + + CLKGEN input signals include the external clock for the reference frequency + (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz). + + Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system. + + RSTGEN provides the registers needed to control resetting of each block in + the Tegra system. + +properties: + compatible: + const: nvidia,tegra124-car + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + "#reset-cells": + const: 1 + + nvidia,external-memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of the external memory controller node + +patternProperties: + "^emc-timings-[0-9]+$": + type: object + properties: + nvidia,ram-code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that + this timing set is used for + + patternProperties: + "^timing-[0-9]+$": + type: object + properties: + clock-frequency: + description: + external memory clock rate in Hz + minimum: 1000000 + maximum: 1000000000 + + nvidia,parent-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + rate of parent clock in Hz + minimum: 1000000 + maximum: 1000000000 + + clocks: + items: + - description: parent clock of EMC + + clock-names: + items: + - const: emc-parent + + required: + - clock-frequency + - nvidia,parent-clock-frequency + - clocks + - clock-names + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - '#clock-cells' + - "#reset-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + + car: clock-controller@60006000 { + compatible = "nvidia,tegra124-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + usb-controller@c5004000 { + compatible = "nvidia,tegra20-ehci"; + reg = <0xc5004000 0x4000>; + clocks = <&car TEGRA124_CLK_USB2>; + resets = <&car TEGRA124_CLK_USB2>; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt deleted file mode 100644 index 6c5901b503d0..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt +++ /dev/null @@ -1,63 +0,0 @@ -NVIDIA Tegra20 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra20-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in", and the board-specific oscillator "osc". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in header file - <dt-bindings/clock/tegra20-car.h>. -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. - -Example SoC include file: - -/ { - tegra_car: clock { - compatible = "nvidia,tegra20-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA20_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - osc: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k> <&osc>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml new file mode 100644 index 000000000000..459d2a525393 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nvidia,tegra20-car.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Clock and Reset Controller + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The Clock and Reset (CAR) is the HW module responsible for muxing and gating + Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units. + + CLKGEN provides the registers to program the PLLs. It controls most of + the clock source programming and most of the clock dividers. + + CLKGEN input signals include the external clock for the reference frequency + (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz). + + Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system. + + RSTGEN provides the registers needed to control resetting of each block in + the Tegra system. + +properties: + compatible: + enum: + - nvidia,tegra20-car + - nvidia,tegra30-car + - nvidia,tegra114-car + - nvidia,tegra210-car + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + - "#reset-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + + car: clock-controller@60006000 { + compatible = "nvidia,tegra20-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + usb-controller@c5004000 { + compatible = "nvidia,tegra20-ehci"; + reg = <0xc5004000 0x4000>; + clocks = <&car TEGRA20_CLK_USB2>; + resets = <&car TEGRA20_CLK_USB2>; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt deleted file mode 100644 index 26f237f641b7..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt +++ /dev/null @@ -1,56 +0,0 @@ -NVIDIA Tegra210 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra210-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in header file - <dt-bindings/clock/tegra210-car.h>. -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. - -Example SoC include file: - -/ { - tegra_car: clock { - compatible = "nvidia,tegra210-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA210_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt deleted file mode 100644 index 63618cde12df..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt +++ /dev/null @@ -1,63 +0,0 @@ -NVIDIA Tegra30 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra30-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in", and the board-specific oscillator "osc". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in header file - <dt-bindings/clock/tegra30-car.h>. -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. - -Example SoC include file: - -/ { - tegra_car: clock { - compatible = "nvidia,tegra30-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA30_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - osc: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k> <&osc>; - }; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index 96c914e048f5..2015f50aed0f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -73,7 +73,7 @@ i2c0: i2c@f8034600 { pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; wm8731: wm8731@1a { compatible = "wm8731"; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 19c7bd482a51..d3f05d5934d5 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -52,10 +52,11 @@ properties: - description: MAC RX clock - description: For MPU family, used for power mode - description: For MPU family, used for PHY without quartz + - description: PTP clock clock-names: minItems: 3 - maxItems: 5 + maxItems: 6 contains: enum: - stmmaceth @@ -63,6 +64,7 @@ properties: - mac-clk-rx - ethstp - eth-ck + - ptp_ref st,syscon: $ref: "/schemas/types.yaml#/definitions/phandle-array" diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt index 8c60e6985950..5ffd0f55d010 100644 --- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt @@ -42,22 +42,22 @@ Required properties (child nodes): Examples: - cpm_comphy: phy@120000 { + CP11X_LABEL(comphy): phy@120000 { compatible = "marvell,comphy-cp110"; reg = <0x120000 0x6000>; - marvell,system-controller = <&cpm_syscon0>; - clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; clock-names = "mg_clk", "mg_core_clk", "axi_clk"; #address-cells = <1>; #size-cells = <0>; - cpm_comphy0: phy@0 { + CP11X_LABEL(comphy0): phy@0 { reg = <0>; #phy-cells = <1>; }; - cpm_comphy1: phy@1 { + CP11X_LABEL(comphy1): phy@1 { reg = <1>; #phy-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml index a96e6dbf1858..eb248f24dce6 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml @@ -66,6 +66,16 @@ properties: power-supply: true + resets: + description: | + A number of phandles to resets that need to be asserted during + power-up sequencing of the domain. The resets belong to devices + located inside the power domain, which need to be held in reset + across the power-up sequence. So no means to specify what each + reset is in a generic power-domain binding. + minItems: 1 + maxItems: 4 + required: - '#power-domain-cells' - reg diff --git a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml new file mode 100644 index 000000000000..84ddc772b003 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas RZ/G2L System Controller (SYSC) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The RZ/G2L System Controller (SYSC) performs system control of the LSI and + supports following functions, + - External terminal state capture function + - 34-bit address space access function + - Low power consumption control + - WDT stop control + +properties: + compatible: + enum: + - renesas,r9a07g044-sysc # RZ/G2{L,LC} + + reg: + maxItems: 1 + + interrupts: + items: + - description: CA55/CM33 Sleep/Software Standby Mode request interrupt + - description: CA55 Software Standby Mode release request interrupt + - description: CM33 Software Standby Mode release request interrupt + - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt + + interrupt-names: + items: + - const: lpm_int + - const: ca55stbydone_int + - const: cm33stbyr_int + - const: ca55_deny + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g044-sysc"; + reg = <0x11020000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int", + "ca55_deny"; + }; diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 54a7700df08f..800d511502c4 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -25,6 +25,9 @@ properties: - const: allwinner,sun8i-a83t-pwm - const: allwinner,sun8i-h3-pwm - items: + - const: allwinner,sun8i-v3s-pwm + - const: allwinner,sun7i-a20-pwm + - items: - const: allwinner,sun50i-a64-pwm - const: allwinner,sun5i-a13-pwm - items: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index a16e37b01e1d..39b66e9ce3e3 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -20,6 +20,9 @@ properties: - const: allwinner,sun6i-a31-i2s - const: allwinner,sun8i-a83t-i2s - const: allwinner,sun8i-h3-i2s + - items: + - const: allwinner,sun8i-v3-i2s + - const: allwinner,sun8i-h3-i2s - const: allwinner,sun50i-a64-codec-i2s - items: - const: allwinner,sun50i-a64-i2s diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml index 9718358826ab..26eca21e1f0f 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml @@ -12,12 +12,15 @@ maintainers: properties: compatible: - enum: + oneOf: # FIXME: This is documented in the PRCM binding, but needs to be # migrated here at some point # - allwinner,sun8i-a23-codec-analog - - allwinner,sun8i-h3-codec-analog - - allwinner,sun8i-v3s-codec-analog + - const: allwinner,sun8i-h3-codec-analog + - items: + - const: allwinner,sun8i-v3-codec-analog + - const: allwinner,sun8i-h3-codec-analog + - const: allwinner,sun8i-v3s-codec-analog reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml index 1c7cf32e7ac2..53fd24bdc34e 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml @@ -12,11 +12,18 @@ maintainers: properties: compatible: - enum: - - allwinner,sun4i-a10-timer - - allwinner,sun8i-a23-timer - - allwinner,sun8i-v3s-timer - - allwinner,suniv-f1c100s-timer + oneOf: + - enum: + - allwinner,sun4i-a10-timer + - allwinner,sun8i-a23-timer + - allwinner,sun8i-v3s-timer + - allwinner,suniv-f1c100s-timer + - items: + - enum: + - allwinner,sun50i-a64-timer + - allwinner,sun50i-h6-timer + - allwinner,sun50i-h616-timer + - const: allwinner,sun8i-a23-timer reg: maxItems: 1 @@ -34,8 +41,8 @@ allOf: - if: properties: compatible: - items: - const: allwinner,sun4i-a10-timer + enum: + - allwinner,sun4i-a10-timer then: properties: @@ -46,8 +53,8 @@ allOf: - if: properties: compatible: - items: - const: allwinner,sun8i-a23-timer + enum: + - allwinner,sun8i-a23-timer then: properties: @@ -58,20 +65,9 @@ allOf: - if: properties: compatible: - items: - const: allwinner,sun8i-v3s-timer - - then: - properties: - interrupts: - minItems: 3 - maxItems: 3 - - - if: - properties: - compatible: - items: - const: allwinner,suniv-f1c100s-timer + enum: + - allwinner,sun8i-v3s-timer + - allwinner,suniv-f1c100s-timer then: properties: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2bbc27aae977..07fb0d25fc15 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -249,6 +249,8 @@ patternProperties: description: Colorful GRP, Shenzhen Xueyushi Technology Ltd. "^compulab,.*": description: CompuLab Ltd. + "^congatec,.*": + description: congatec GmbH "^coreriver,.*": description: CORERIVER Semiconductor Co.,Ltd. "^corpro,.*": @@ -315,6 +317,8 @@ patternProperties: description: DPTechnics "^dragino,.*": description: Dragino Technology Co., Limited + "^ds,.*": + description: DaSheng, Inc. "^dserve,.*": description: dServe Technology B.V. "^dynaimage,.*": @@ -409,6 +413,8 @@ patternProperties: description: Firefly "^focaltech,.*": description: FocalTech Systems Co.,Ltd + "^forlinx,.*": + description: Baoding Forlinx Embedded Technology Co., Ltd. "^frida,.*": description: Shenzhen Frida LCD Co., Ltd. "^friendlyarm,.*": @@ -1252,6 +1258,8 @@ patternProperties: description: Western Digital Corp. "^we,.*": description: Würth Elektronik GmbH. + "^welltech,.*": + description: Welltech Computer Co., Limited. "^wetek,.*": description: WeTek Electronics, limited. "^wexler,.*": |