diff options
Diffstat (limited to 'arch/arm/mach-omap2')
24 files changed, 298 insertions, 569 deletions
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index da75f239873e..37abb0d49b51 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -37,7 +37,7 @@ #include <plat/dma.h> #include <plat/gpmc.h> #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/gpmc-smc91x.h> @@ -113,9 +113,6 @@ static struct gpio sdp3430_dss_gpios[] __initdata = { {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, }; -static int lcd_enabled; -static int dvi_enabled; - static void __init sdp3430_display_init(void) { int r; @@ -129,44 +126,18 @@ static void __init sdp3430_display_init(void) static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) { - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); - lcd_enabled = 1; - return 0; } static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) { - lcd_enabled = 0; - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); } -static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - - dvi_enabled = 1; - - return 0; -} - -static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - dvi_enabled = 0; -} - static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) { return 0; @@ -186,15 +157,14 @@ static struct omap_dss_device sdp3430_lcd_device = { .platform_disable = sdp3430_panel_disable_lcd, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = sdp3430_panel_enable_dvi, - .platform_disable = sdp3430_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = -1, }; static struct omap_dss_device sdp3430_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a39fc4bbd2b8..b4ad706c145a 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include <linux/usb/otg.h> #include <linux/spi/spi.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_vibra_data twl6040_vibra = { +static struct twl6040_vibra_data twl6040_vibra = { .vibldrv_res = 8, .vibrdrv_res = 3, .viblmotor_res = 10, @@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = { .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); @@ -666,6 +666,10 @@ static struct nokia_dsi_panel_data dsi1_panel = { .use_ext_te = false, .ext_te_gpio = 101, .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, }; static struct omap_dss_device sdp4430_lcd_device = { @@ -674,13 +678,6 @@ static struct omap_dss_device sdp4430_lcd_device = { .type = OMAP_DISPLAY_TYPE_DSI, .data = &dsi1_panel, .phy.dsi = { - .clk_lane = 1, - .clk_pol = 0, - .data1_lane = 2, - .data1_pol = 0, - .data2_lane = 3, - .data2_pol = 0, - .module = 0, }, @@ -715,6 +712,10 @@ static struct nokia_dsi_panel_data dsi2_panel = { .use_ext_te = false, .ext_te_gpio = 103, .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, }; static struct omap_dss_device sdp4430_lcd2_device = { @@ -723,12 +724,6 @@ static struct omap_dss_device sdp4430_lcd2_device = { .type = OMAP_DISPLAY_TYPE_DSI, .data = &dsi2_panel, .phy.dsi = { - .clk_lane = 1, - .clk_pol = 0, - .data1_lane = 2, - .data1_pol = 0, - .data2_lane = 3, - .data2_pol = 0, .module = 1, }, @@ -758,21 +753,6 @@ static struct omap_dss_device sdp4430_lcd2_device = { .channel = OMAP_DSS_CHANNEL_LCD2, }; -static void sdp4430_lcd_init(void) -{ - int r; - - r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT, - "lcd1_reset_gpio"); - if (r) - pr_err("%s: Could not get lcd1_reset_gpio\n", __func__); - - r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT, - "lcd2_reset_gpio"); - if (r) - pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); -} - static struct omap_dss_hdmi_data sdp4430_hdmi_data = { .hpd_gpio = HDMI_GPIO_HPD, }; @@ -858,7 +838,6 @@ static void __init omap_4430sdp_display_init(void) if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_lcd_init(); sdp4430_picodlp_init(); omap_display_init(&sdp4430_dss_data); /* diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 3645285a3e2b..99790eb646e8 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -37,7 +37,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include "am35xx-emac.h" #include "mux.h" @@ -207,31 +207,14 @@ static struct omap_dss_device am3517_evm_tv_device = { .platform_disable = am3517_evm_panel_disable_tv, }; -static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - dvi_enabled = 1; - - return 0; -} - -static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = am3517_evm_panel_enable_dvi, - .platform_disable = am3517_evm_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = -1, }; static struct omap_dss_device am3517_evm_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 909a8b91b564..45746cb56c68 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -44,7 +44,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <mach/hardware.h> @@ -218,25 +218,6 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) gpio_set_value(CM_T35_LCD_EN_GPIO, 0); } -static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - - gpio_set_value(CM_T35_DVI_EN_GPIO, 0); - dvi_enabled = 1; - - return 0; -} - -static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(CM_T35_DVI_EN_GPIO, 1); - dvi_enabled = 0; -} - static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev) { return 0; @@ -260,15 +241,14 @@ static struct omap_dss_device cm_t35_lcd_device = { .phy.dpi.data_lines = 18, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = cm_t35_panel_enable_dvi, - .platform_disable = cm_t35_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = CM_T35_DVI_EN_GPIO, }; static struct omap_dss_device cm_t35_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -316,7 +296,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { static struct gpio cm_t35_dss_gpios[] __initdata = { { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, - { CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" }, }; static void __init cm_t35_init_display(void) @@ -335,7 +314,6 @@ static void __init cm_t35_init_display(void) gpio_export(CM_T35_LCD_EN_GPIO, 0); gpio_export(CM_T35_LCD_BL_GPIO, 0); - gpio_export(CM_T35_DVI_EN_GPIO, 0); msleep(50); gpio_set_value(CM_T35_LCD_EN_GPIO, 1); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index a2010f07de31..b063f0d2faa6 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -47,7 +47,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -118,19 +118,6 @@ static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) gpio_set_value_cansleep(dssdev->reset_gpio, 0); } -static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 1); - return 0; -} - -static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 0); -} - static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -154,15 +141,14 @@ static struct omap_dss_device devkit8000_lcd_device = { .phy.dpi.data_lines = 24, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = devkit8000_panel_enable_dvi, - .platform_disable = devkit8000_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = -1, }; static struct omap_dss_device devkit8000_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -244,13 +230,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, } /* gpio + 7 is "DVI_PD" (out, active low) */ - devkit8000_dvi_device.reset_gpio = gpio + 7; - ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "DVI PowerDown"); - if (ret < 0) { - devkit8000_dvi_device.reset_gpio = -EINVAL; - printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); - } + dvi_panel.power_down_gpio = gpio + 7; return 0; } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687b5170..098d183a0086 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = { static void __init omap4_i2c_init(void) { - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); } static void __init omap4_init(void) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 930c0d380435..04816c96e829 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -32,7 +32,7 @@ #include <plat/gpmc.h> #include <plat/usb.h> #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/onenand.h> #include "mux.h" @@ -444,28 +444,15 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .setup = igep_twl_gpio_setup, }; -static int igep2_enable_dvi(struct omap_dss_device *dssdev) -{ - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1); - - return 0; -} - -static void igep2_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0); -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = igep2_enable_dvi, - .platform_disable = igep2_disable_dvi, - .i2c_bus_num = 3, +static struct tfp410_platform_data dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = IGEP2_GPIO_DVI_PUP, }; static struct omap_dss_device igep2_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -480,14 +467,6 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, }; -static void __init igep2_display_init(void) -{ - int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, - "GPIO_DVI_PUP"); - if (err) - pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); -} - static struct platform_device *igep_devices[] __initdata = { &igep_vwlan_device, }; @@ -668,7 +647,6 @@ static void __init igep_init(void) if (machine_is_igep0020()) { omap_display_init(&igep2_dss_data); - igep2_display_init(); igep2_init_smsc911x(); usbhs_init(&igep2_usbhs_bdata); } else { diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7be8d659d91d..8ede8d20d7b2 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,7 +42,7 @@ #include <plat/board.h> #include "common.h" #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -189,33 +189,17 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { /* DSS */ -static int beagle_enable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value(dssdev->reset_gpio, 1); - - return 0; -} - -static void beagle_disable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value(dssdev->reset_gpio, 0); -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = beagle_enable_dvi, - .platform_disable = beagle_disable_dvi, +static struct tfp410_platform_data dvi_panel = { .i2c_bus_num = 3, + .power_down_gpio = -1, }; static struct omap_dss_device beagle_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, - .reset_gpio = -EINVAL, }; static struct omap_dss_device beagle_tv_device = { @@ -236,16 +220,6 @@ static struct omap_dss_board_info beagle_dss_data = { .default_device = &beagle_dvi_device, }; -static void __init beagle_display_init(void) -{ - int r; - - r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW, - "DVI reset"); - if (r < 0) - printk(KERN_ERR "Unable to get DVI reset GPIO\n"); -} - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -309,7 +283,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - beagle_dvi_device.reset_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.reset_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -552,7 +526,6 @@ static void __init omap3_beagle_init(void) omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - beagle_display_init(); beagle_opp_init(); } diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 49df12735b41..9919d6c1a531 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -46,7 +46,7 @@ #include "common.h" #include <plat/mcspi.h> #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -219,35 +219,14 @@ static struct omap_dss_device omap3_evm_tv_device = { .platform_disable = omap3_evm_disable_tv, }; -static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - - gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1); - - dvi_enabled = 1; - return 0; -} - -static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0); - - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = omap3_evm_enable_dvi, - .platform_disable = omap3_evm_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, }; static struct omap_dss_device omap3_evm_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 4dffc95bddd2..4396bae91677 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -42,7 +42,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -92,9 +92,6 @@ static inline void __init omap3stalker_init_eth(void) #define LCD_PANEL_BKLIGHT_GPIO 210 #define ENABLE_VPLL2_DEV_GRP 0xE0 -static int lcd_enabled; -static int dvi_enabled; - static void __init omap3_stalker_display_init(void) { return; @@ -122,32 +119,14 @@ static struct omap_dss_device omap3_stalker_tv_device = { .platform_disable = omap3_stalker_disable_tv, }; -static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - gpio_set_value(DSS_ENABLE_GPIO, 1); - dvi_enabled = 1; - return 0; -} - -static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(DSS_ENABLE_GPIO, 0); - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = omap3_stalker_enable_dvi, - .platform_disable = omap3_stalker_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = DSS_ENABLE_GPIO, }; static struct omap_dss_device omap3_stalker_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8c0e89f0126..b26cd15f3c8b 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/usb/otg.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> @@ -41,7 +42,7 @@ #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include "hsmmc.h" #include "control.h" @@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, -}; +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &omap4_panda_twldata); + omap4_pmic_init("twl6030", &omap4_panda_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP @@ -421,46 +420,22 @@ static struct omap_board_mux board_mux[] __initdata = { /* Display DVI */ #define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 -static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 1); - return 0; -} - -static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 0); -} - /* Using generic display panel */ -static struct panel_dvi_platform_data omap4_dvi_panel = { - .platform_enable = omap4_panda_enable_dvi, - .platform_disable = omap4_panda_disable_dvi, - .i2c_bus_num = 3, +static struct tfp410_platform_data omap4_dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, }; struct omap_dss_device omap4_panda_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &omap4_dvi_panel, .phy.dpi.data_lines = 24, .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, .channel = OMAP_DSS_CHANNEL_LCD2, }; -int __init omap4_panda_dvi_init(void) -{ - int r; - - /* Requesting TFP410 DVI GPIO and disabling it, at bootup */ - r = gpio_request_one(omap4_panda_dvi_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "DVI PD"); - if (r) - pr_err("Failed to get DVI powerdown GPIO\n"); - - return r; -} static struct gpio panda_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, @@ -512,11 +487,6 @@ static struct omap_dss_board_info omap4_panda_dss_data = { void __init omap4_panda_display_init(void) { - int r; - - r = omap4_panda_dvi_init(); - if (r) - pr_err("error initializing panda DVI\n"); omap_display_init(&omap4_panda_dss_data); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 33aa3910b09e..5527c1979a16 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -46,7 +46,7 @@ #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> @@ -167,32 +167,15 @@ static void __init overo_display_init(void) gpio_export(OVERO_GPIO_LCD_BL, 0); } -static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - dvi_enabled = 1; - - return 0; -} - -static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = overo_panel_enable_dvi, - .platform_disable = overo_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { .i2c_bus_num = 3, + .power_down_gpio = -1, }; static struct omap_dss_device overo_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 7072e0d651b1..3d9d746b221a 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - * XXX This should be replaced by an OPP layer in the near future - */ -static struct cpufreq_frequency_table *freq_table; - -void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - const struct prcm_config *prcm; - int i = 0; - int tbl_sz = 0; - - if (!cpu_is_omap24xx()) - return; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - tbl_sz++; - } - - /* - * XXX Ensure that we're doing what CPUFreq expects for this error - * case and the following one - */ - if (tbl_sz == 0) { - pr_warning("%s: no matching entries in rate_table\n", - __func__); - return; - } - - /* Include the CPUFREQ_TABLE_END terminator entry */ - tbl_sz++; - - freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, - GFP_ATOMIC); - if (!freq_table) { - pr_err("%s: could not kzalloc frequency table\n", __func__); - return; - } - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} - -void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - if (!cpu_is_omap24xx()) - return; - - kfree(freq_table); -} - -#endif diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f57ed5baeccf..d9f4931513f9 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - /* These will be removed when the OPP code is integrated */ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, - .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table, -#endif }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b8c2a686481c..a1bb23a23351 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[]; extern const struct clksel_rate gfx_l3_rates[]; extern const struct clksel_rate dsp_ick_rates[]; -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ) -extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#else -#define omap2_clk_init_cpufreq_table 0 -#define omap2_clk_exit_cpufreq_table 0 -#endif - extern const struct clkops clkops_omap2_iclk_dflt_wait; extern const struct clkops clkops_omap2_iclk_dflt; extern const struct clkops clkops_omap2_iclk_idle_only; diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index db5a88a36c63..54d49ddb9b81 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -180,16 +180,133 @@ static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) omap4_dsi_mux_pads(dsi_id, 0); } +static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput) +{ + return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput); +} + +static struct platform_device *create_dss_pdev(const char *pdev_name, + int pdev_id, const char *oh_name, void *pdata, int pdata_len, + struct platform_device *parent) +{ + struct platform_device *pdev; + struct omap_device *od; + struct omap_hwmod *ohs[1]; + struct omap_hwmod *oh; + int r; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + r = -ENODEV; + goto err; + } + + pdev = platform_device_alloc(pdev_name, pdev_id); + if (!pdev) { + pr_err("Could not create pdev for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + if (parent != NULL) + pdev->dev.parent = &parent->dev; + + if (pdev->id != -1) + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + else + dev_set_name(&pdev->dev, "%s", pdev->name); + + ohs[0] = oh; + od = omap_device_alloc(pdev, ohs, 1, NULL, 0); + if (!od) { + pr_err("Could not alloc omap_device for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + r = platform_device_add_data(pdev, pdata, pdata_len); + if (r) { + pr_err("Could not set pdata for %s\n", pdev_name); + goto err; + } + + r = omap_device_register(pdev); + if (r) { + pr_err("Could not register omap_device for %s\n", pdev_name); + goto err; + } + + return pdev; + +err: + return ERR_PTR(r); +} + +static struct platform_device *create_simple_dss_pdev(const char *pdev_name, + int pdev_id, void *pdata, int pdata_len, + struct platform_device *parent) +{ + struct platform_device *pdev; + int r; + + pdev = platform_device_alloc(pdev_name, pdev_id); + if (!pdev) { + pr_err("Could not create pdev for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + if (parent != NULL) + pdev->dev.parent = &parent->dev; + + if (pdev->id != -1) + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + else + dev_set_name(&pdev->dev, "%s", pdev->name); + + r = platform_device_add_data(pdev, pdata, pdata_len); + if (r) { + pr_err("Could not set pdata for %s\n", pdev_name); + goto err; + } + + r = omap_device_register(pdev); + if (r) { + pr_err("Could not register omap_device for %s\n", pdev_name); + goto err; + } + + return pdev; + +err: + return ERR_PTR(r); +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; - struct omap_hwmod *oh; struct platform_device *pdev; int i, oh_count; - struct omap_display_platform_data pdata; const struct omap_dss_hwmod_data *curr_dss_hwmod; + struct platform_device *dss_pdev; + + /* create omapdss device */ + + board_data->dsi_enable_pads = omap_dsi_enable_pads; + board_data->dsi_disable_pads = omap_dsi_disable_pads; + board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count; + board_data->set_min_bus_tput = omap_dss_set_min_bus_tput; + + omap_display_device.dev.platform_data = board_data; + + r = platform_device_register(&omap_display_device); + if (r < 0) { + pr_err("Unable to register omapdss device\n"); + return r; + } - memset(&pdata, 0, sizeof(pdata)); + /* create devices for dss hwmods */ if (cpu_is_omap24xx()) { curr_dss_hwmod = omap2_dss_hwmod_data; @@ -202,39 +319,58 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) oh_count = ARRAY_SIZE(omap4_dss_hwmod_data); } - if (board_data->dsi_enable_pads == NULL) - board_data->dsi_enable_pads = omap_dsi_enable_pads; - if (board_data->dsi_disable_pads == NULL) - board_data->dsi_disable_pads = omap_dsi_disable_pads; - - pdata.board_data = board_data; - pdata.board_data->get_context_loss_count = - omap_pm_get_dev_context_loss_count; - - for (i = 0; i < oh_count; i++) { - oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name); - if (!oh) { - pr_err("Could not look up %s\n", - curr_dss_hwmod[i].oh_name); - return -ENODEV; + /* + * First create the pdev for dss_core, which is used as a parent device + * by the other dss pdevs. Note: dss_core has to be the first item in + * the hwmod list. + */ + dss_pdev = create_dss_pdev(curr_dss_hwmod[0].dev_name, + curr_dss_hwmod[0].id, + curr_dss_hwmod[0].oh_name, + board_data, sizeof(*board_data), + NULL); + + if (IS_ERR(dss_pdev)) { + pr_err("Could not build omap_device for %s\n", + curr_dss_hwmod[0].oh_name); + + return PTR_ERR(dss_pdev); + } + + for (i = 1; i < oh_count; i++) { + pdev = create_dss_pdev(curr_dss_hwmod[i].dev_name, + curr_dss_hwmod[i].id, + curr_dss_hwmod[i].oh_name, + board_data, sizeof(*board_data), + dss_pdev); + + if (IS_ERR(pdev)) { + pr_err("Could not build omap_device for %s\n", + curr_dss_hwmod[i].oh_name); + + return PTR_ERR(pdev); } + } - pdev = omap_device_build(curr_dss_hwmod[i].dev_name, - curr_dss_hwmod[i].id, oh, &pdata, - sizeof(struct omap_display_platform_data), - NULL, 0, 0); + /* Create devices for DPI and SDI */ - if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n", - curr_dss_hwmod[i].oh_name)) - return -ENODEV; + pdev = create_simple_dss_pdev("omapdss_dpi", -1, + board_data, sizeof(*board_data), dss_pdev); + if (IS_ERR(pdev)) { + pr_err("Could not build platform_device for omapdss_dpi\n"); + return PTR_ERR(pdev); } - omap_display_device.dev.platform_data = board_data; - r = platform_device_register(&omap_display_device); - if (r < 0) - printk(KERN_ERR "Unable to register OMAP-Display device\n"); + if (cpu_is_omap34xx()) { + pdev = create_simple_dss_pdev("omapdss_sdi", -1, + board_data, sizeof(*board_data), dss_pdev); + if (IS_ERR(pdev)) { + pr_err("Could not build platform_device for omapdss_sdi\n"); + return PTR_ERR(pdev); + } + } - return r; + return 0; } static void dispc_disable_outputs(void) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2c27fdb61e66..7144ae651d3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh) goto dis_opt_clks; _write_sysconfig(v, oh); + if (oh->class->sysc->srst_udelay) + udelay(oh->class->sysc->srst_udelay); + if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) @@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) */ int omap_hwmod_softreset(struct omap_hwmod *oh) { - if (!oh) + u32 v; + int ret; + + if (!oh || !(oh->_sysc_cache)) return -EINVAL; - return _ocp_softreset(oh); + v = oh->_sysc_cache; + ret = _set_softreset(oh, &v); + if (ret) + goto error; + _write_sysconfig(v, oh); + +error: + return ret; } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a5409ce3f323..a6bde34e443a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c4f56cb60d7d..04a3885f4475 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .slave = &omap2430_dss_venc_hwmod, .clk = "dss_ick", .addr = omap2_dss_venc_addrs, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 34b9766d1d23..db86ce90c69f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index cc9bd106a854..6abc75753e42 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, + /* + * ISS needs 100 OCP clk cycles delay after a softreset before + * accessing sysconfig again. + * The lowest frequency at the moment for L3 bus is 100 MHz, so + * 1usec delay is needed. Add an x2 margin to be safe (2 usecs). + * + * TODO: Indicate errata when available. + */ + .srst_udelay = 2, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0cdd359a128e..9fc2f44188cb 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev) static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); + u8 idlemode; - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); + if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + + omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); } #else @@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static struct omap_device_pad default_uart1_pads[] __initdata = { - { - .name = "uart1_cts.uart1_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rts.uart1_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_tx.uart1_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rx.uart1_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart2_pads[] __initdata = { - { - .name = "uart2_cts.uart2_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rts.uart2_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_tx.uart2_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rx.uart2_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart3_pads[] __initdata = { - { - .name = "uart3_cts_rctx.uart3_cts_rctx", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rts_sd.uart3_rts_sd", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_tx_irtx.uart3_tx_irtx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = { - { - .name = "gpmc_wait2.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "gpmc_wait3.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - }, -}; - -static struct omap_device_pad default_omap4_uart4_pads[] __initdata = { - { - .name = "uart4_tx.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart4_rx.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - static void omap_serial_fill_default_pads(struct omap_board_data *bdata) { - switch (bdata->id) { - case 0: - bdata->pads = default_uart1_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads); - break; - case 1: - bdata->pads = default_uart2_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads); - break; - case 2: - bdata->pads = default_uart3_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads); - break; - case 3: - if (cpu_is_omap44xx()) { - bdata->pads = default_omap4_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap4_uart4_pads); - } else if (cpu_is_omap3630()) { - bdata->pads = default_omap36xx_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap36xx_uart4_pads); - } - break; - default: - break; - } } #else static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4b57757bf9d1..7a7b89304c48 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; +static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { + { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, + }, + { + I2C_BOARD_INFO("twl6040", 0x4b), + }, +}; + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *twl6040_data, int twl6040_irq) +{ + /* PMIC part*/ + strncpy(omap4_i2c1_board_info[0].type, pmic_type, + sizeof(omap4_i2c1_board_info[0].type)); + omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].platform_data = pmic_data; + + /* TWL6040 audio IC part */ + omap4_i2c1_board_info[1].irq = twl6040_irq; + omap4_i2c1_board_info[1].platform_data = twl6040_data; + + omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + +} + void __init omap_pmic_late_init(void) { /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); + if (pmic_i2c_board_info.irq) + omap3_twl_init(); + if (omap4_i2c1_board_info[0].irq) + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 275dde8cb27a..09627483a57f 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -29,6 +29,7 @@ struct twl4030_platform_data; +struct twl6040_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type, omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); } -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} +void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *audio_data, int twl6040_irq); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); |