diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 397 |
1 files changed, 387 insertions, 10 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index 9921ea13ab48..d400d85f42a9 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/usb/pd.h> #include "imx93.dtsi" / { @@ -38,7 +39,7 @@ no-map; }; - vdev1vring0: vdev1vring0@a4000000 { + vdev1vring0: vdev1vring0@a4010000 { reg = <0 0xa4010000 0 0x8000>; no-map; }; @@ -48,8 +49,8 @@ no-map; }; - rsc_table: rsc-table@2021f000 { - reg = <0 0x2021f000 0 0x1000>; + rsc_table: rsc-table@2021e000 { + reg = <0 0x2021e000 0 0x1000>; no-map; }; @@ -104,9 +105,85 @@ status = "okay"; }; -&eqos { +&lpi2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; + status = "okay"; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x50>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + typec1_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + }; + }; + + ptn5110_2: tcpc@51 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x51>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + typec2_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec2_dr_sw: endpoint { + remote-endpoint = <&usb2_drd_sw>; + }; + }; + }; + }; + }; +}; + +&eqos { + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_eqos>; + pinctrl-1 = <&pinctrl_eqos_sleep>; phy-mode = "rgmii-id"; phy-handle = <ðphy1>; status = "okay"; @@ -120,13 +197,17 @@ ethphy1: ethernet-phy@1 { reg = <1>; eee-broken-1000t; + reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; }; }; }; &fec { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; phy-mode = "rgmii-id"; phy-handle = <ðphy2>; fsl,magic-packet; @@ -140,6 +221,9 @@ ethphy2: ethernet-phy@2 { reg = <2>; eee-broken-1000t; + reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; }; }; }; @@ -156,21 +240,58 @@ status = "okay"; }; +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usbotg2 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + usb2_drd_sw: endpoint { + remote-endpoint = <&typec2_dr_sw>; + }; + }; +}; + &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1>; - pinctrl-2 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <8>; non-removable; status = "okay"; }; &usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; vmmc-supply = <®_usdhc2_vmmc>; bus-width = <4>; @@ -183,6 +304,118 @@ status = "okay"; }; +&lpi2c2 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-1 = <&pinctrl_lpi2c2>; + status = "okay"; + + pcal6524: gpio@22 { + compatible = "nxp,pcal6524"; + reg = <0x22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcal6524>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + }; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + interrupt-parent = <&pcal6524>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <610000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <670000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1060000>; + regulator-max-microvolt = <1140000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <840000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; + status = "okay"; + + pcf2131: rtc@53 { + compatible = "nxp,pcf2131"; + reg = <0x53>; + interrupt-parent = <&pcal6524>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; +}; + &iomuxc { pinctrl_eqos: eqosgrp { fsl,pins = < @@ -203,6 +436,25 @@ >; }; + pinctrl_eqos_sleep: eqossleepgrp { + fsl,pins = < + MX93_PAD_ENET1_MDC__GPIO4_IO00 0x31e + MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x31e + MX93_PAD_ENET1_RD0__GPIO4_IO10 0x31e + MX93_PAD_ENET1_RD1__GPIO4_IO11 0x31e + MX93_PAD_ENET1_RD2__GPIO4_IO12 0x31e + MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e + MX93_PAD_ENET1_RXC__GPIO4_IO09 0x31e + MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x31e + MX93_PAD_ENET1_TD0__GPIO4_IO05 0x31e + MX93_PAD_ENET1_TD1__GPIO4_IO04 0x31e + MX93_PAD_ENET1_TD2__GPIO4_IO03 0x31e + MX93_PAD_ENET1_TD3__GPIO4_IO02 0x31e + MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e + MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x31e + >; + }; + pinctrl_fec: fecgrp { fsl,pins = < MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e @@ -222,6 +474,32 @@ >; }; + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_fec_sleep: fecsleepgrp { + fsl,pins = < + MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e + MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e + MX93_PAD_ENET2_RD0__GPIO4_IO24 0x51e + MX93_PAD_ENET2_RD1__GPIO4_IO25 0x51e + MX93_PAD_ENET2_RD2__GPIO4_IO26 0x51e + MX93_PAD_ENET2_RD3__GPIO4_IO27 0x51e + MX93_PAD_ENET2_RXC__GPIO4_IO23 0x51e + MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e + MX93_PAD_ENET2_TD0__GPIO4_IO19 0x51e + MX93_PAD_ENET2_TD1__GPIO4_IO18 0x51e + MX93_PAD_ENET2_TD2__GPIO4_IO17 0x51e + MX93_PAD_ENET2_TD3__GPIO4_IO16 0x51e + MX93_PAD_ENET2_TXC__GPIO4_IO21 0x51e + MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX93_PAD_UART1_RXD__LPUART1_RX 0x31e @@ -238,9 +516,63 @@ >; }; + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e + MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_pcal6524: pcal6524grp { + fsl,pins = < + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e + >; + }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1: usdhc1grp { fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582 + MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382 + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382 + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382 + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382 + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382 + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382 + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382 + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382 + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382 + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582 + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e + MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe @@ -267,9 +599,41 @@ >; }; + pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x51e + >; + }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc2: usdhc2grp { fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582 + MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382 + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382 + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382 + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382 + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382 + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe @@ -279,4 +643,17 @@ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e >; }; + + pinctrl_usdhc2_sleep: usdhc2sleepgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__GPIO3_IO01 0x51e + MX93_PAD_SD2_CMD__GPIO3_IO02 0x51e + MX93_PAD_SD2_DATA0__GPIO3_IO03 0x51e + MX93_PAD_SD2_DATA1__GPIO3_IO04 0x51e + MX93_PAD_SD2_DATA2__GPIO3_IO05 0x51e + MX93_PAD_SD2_DATA3__GPIO3_IO06 0x51e + MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x51e + >; + }; + }; |