diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 259 |
1 files changed, 259 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi new file mode 100644 index 000000000000..90b13cbe2fa6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" + +/ { + /* + * Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350! + * Adding it will cause the bootloader to go crazy and randomly crash + * shortly after closing UEFI boot services.. Perhaps that has something + * to do with the OS running inside a VM now..? + */ + + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@e1000000 { + compatible = "simple-framebuffer"; + reg = <0 0xe1000000 0 0x2300000>; + + /* The display, even though it's 4K, initializes at 1080-ish p */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet + */ + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + /* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */ + + vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; + + reserved-memory { + cont_splash_mem: memory@e1000000 { + reg = <0 0xe1000000 0 0x2300000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x100000>; + console-size = <0x40000>; + record-size = <0x1000>; + no-map; + }; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/adsp.mbn"; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/cdsp.mbn"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <1000000>; + + /* Some subset of SONY IMX663 camera sensor @ 38 */ +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */ +}; + +&i2c11 { + status = "okay"; + clock-frequency = <1000000>; + + cs35l41_l: cs35l41@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <36 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; + + cs35l41_r: cs35l41@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <36 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; +}; + +&i2c12 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c13 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */ + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c15 { + status = "okay"; + clock-frequency = <400000>; + + /* NXP SN1X0 NFC @ 28 */ +}; + +&i2c17 { + status = "okay"; + clock-frequency = <1000000>; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + +&ipa { + status = "okay"; + memory-region = <&pil_ipa_fw_mem>; + firmware-name = "qcom/ipa_fws.mbn"; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/modem.mbn"; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + linux,code = <KEY_VOLUMEUP>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&slpi { + status = "okay"; + firmware-name = "qcom/slpi.mbn"; +}; + +&spi14 { + status = "okay"; + + /* NXP SN1X0 NFC Secure Element @ 0 */ +}; + +&tlmm { + gpio-reserved-ranges = <44 4>; + + ts_int_default: ts-int-default { + pin = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */ +&usb_1 { + status = "okay"; + + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + + maximum-speed = "high-speed"; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; +}; |