diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8550-qrd.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 425 |
1 files changed, 397 insertions, 28 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index ec4feee6837d..6052dd922ec5 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -11,17 +11,21 @@ #include "pm8010.dtsi" #include "pm8550.dtsi" #include "pm8550b.dtsi" +#define PMK8550VE_SID 5 #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" -#include "pmr735d.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8550 QRD"; compatible = "qcom,sm8550-qrd", "qcom,sm8550"; + chassis-type = "handset"; aliases { serial0 = &uart7; + serial1 = &uart14; }; wcd938x: audio-codec { @@ -74,6 +78,7 @@ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; @@ -97,7 +102,15 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&redriver_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; }; }; }; @@ -111,14 +124,21 @@ "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", "TX DMIC0", "MIC BIAS1", "TX DMIC1", "MIC BIAS2", "TX DMIC2", "MIC BIAS3", - "TX SWR_ADC1", "ADC2_OUTPUT"; + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT0", "ADC3_OUTPUT", + "TX SWR_INPUT1", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; @@ -194,6 +214,65 @@ regulator-always-on; regulator-boot-on; }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>; + + wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_s5g_0p85>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_s2g_0p85>; + vdddig-supply = <&vreg_s4e_0p95>; + vddrfa1p2-supply = <&vreg_s4g_1p25>; + vddrfa1p8-supply = <&vreg_s6g_1p86>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -515,17 +594,201 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p86>; + vdd-l6-supply = <&vreg_s6g_1p86>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p056: ldo1 { + regulator-name = "vreg_l1m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_1p8: ldo6 { + regulator-name = "vreg_l6m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p9: ldo7 { + regulator-name = "vreg_l7m_2p9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p86>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p1: ldo2 { + regulator-name = "vreg_l2n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_2p8: ldo3 { + regulator-name = "vreg_l3n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_2p8: ldo4 { + regulator-name = "vreg_l4n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_1p8: ldo5 { + regulator-name = "vreg_l5n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_3p3: ldo6 { + regulator-name = "vreg_l6n_3p3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_2p96: ldo7 { + regulator-name = "vreg_l7n_2p96"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c_master_hub_0 { + status = "okay"; +}; + +&i2c_hub_2 { + status = "okay"; + + typec-retimer@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l15b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_ss_in: endpoint { + data-lanes = <3 2 1 0>; + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + vcc-supply = <&vreg_bob1>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sm8550/ipa_fws.mbn"; + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; }; -&gcc { - clocks = <&bi_tcxo_div2>, <&sleep_clk>, - <&pcie0_phy>, - <&pcie1_phy>, - <0>, - <&ufs_mem_phy 0>, - <&ufs_mem_phy 1>, - <&ufs_mem_phy 2>, - <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; + }; }; &lpass_tlmm { @@ -586,8 +849,12 @@ status = "okay"; }; -&pcie_1_phy_aux_clk { - status = "disabled"; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; }; &pcie0 { @@ -600,6 +867,23 @@ status = "okay"; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie0_phy { vdda-phy-supply = <&vreg_l1e_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; @@ -683,14 +967,25 @@ status = "okay"; }; -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; +&pmk8550_gpios { + pmk8550_sleep_clk: sleep-clk-state { + pins = "gpio3"; + function = "func1"; + input-disable; + output-enable; + bias-disable; + power-source = <0>; + }; }; &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/sm8550/adsp.mbn", "qcom/sm8550/adsp_dtb.mbn"; @@ -727,6 +1022,7 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker South */ @@ -740,6 +1036,31 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&spi4 { + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vreg_l14b_3p2>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_irq>, <&ts_reset>; }; }; @@ -761,13 +1082,28 @@ wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; - qcom,tx-port-mapping = <1 1 2 3>; + qcom,tx-port-mapping = <2 2 3 4>; }; }; &tlmm { gpio-reserved-ranges = <32 8>; + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio81"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio82"; + function = "gpio"; + bias-pull-down; + }; + }; + sde_dsi_active: sde-dsi-active-state { pins = "gpio133"; function = "gpio"; @@ -796,6 +1132,20 @@ bias-pull-down; }; + ts_irq: ts-irq-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset: ts-reset-state { + pins = "gpio24"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + wcd_default: wcd-reset-n-active-state { pins = "gpio108"; function = "gpio"; @@ -803,20 +1153,44 @@ bias-disable; output-low; }; + + wlan_en: wlan-en-state { + pins = "gpio80"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; }; &uart7 { status = "okay"; }; +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + + max-speed = <3200000>; + }; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l17b_2p5>; vcc-max-microamp = <1300000>; vccq-supply = <&vreg_l1g_1p2>; vccq-max-microamp = <1200000>; - vccq2-supply = <&vreg_l3g_1p2>; - vccq2-max-microamp = <100>; + vdd-hba-supply = <&vreg_l3g_1p2>; status = "okay"; }; @@ -832,19 +1206,10 @@ status = "okay"; }; -&usb_1_dwc3 { - dr_mode = "otg"; - usb-role-switch; -}; - &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; @@ -861,6 +1226,10 @@ status = "okay"; }; +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_ss_in>; +}; + &xo_board { clock-frequency = <76800000>; }; |