diff options
Diffstat (limited to 'arch/arm64/boot/dts')
-rw-r--r-- | arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi | 20 | ||||
-rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 12 | ||||
-rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi | 2 | ||||
-rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra194.dtsi | 2 | ||||
-rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 20 | ||||
-rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts | 6 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/ipq6018.dtsi | 72 | ||||
-rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 1 | ||||
-rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 | ||||
-rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 | ||||
-rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399.dtsi | 3 |
11 files changed, 67 insertions, 77 deletions
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi index 55259f973b5a..aef8f2b00778 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi @@ -5,20 +5,20 @@ usb { compatible = "simple-bus"; dma-ranges; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x68500000 0x00400000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>; usbphy0: usb-phy@0 { compatible = "brcm,sr-usb-combo-phy"; - reg = <0x00000000 0x100>; + reg = <0x0 0x00000000 0x0 0x100>; #phy-cells = <1>; status = "disabled"; }; xhci0: usb@1000 { compatible = "generic-xhci"; - reg = <0x00001000 0x1000>; + reg = <0x0 0x00001000 0x0 0x1000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy0 1>, <&usbphy0 0>; phy-names = "phy0", "phy1"; @@ -28,7 +28,7 @@ bdc0: usb@2000 { compatible = "brcm,bdc-v0.16"; - reg = <0x00002000 0x1000>; + reg = <0x0 0x00002000 0x0 0x1000>; interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy0 0>, <&usbphy0 1>; phy-names = "phy0", "phy1"; @@ -38,21 +38,21 @@ usbphy1: usb-phy@10000 { compatible = "brcm,sr-usb-combo-phy"; - reg = <0x00010000 0x100>; + reg = <0x0 0x00010000 0x0 0x100>; #phy-cells = <1>; status = "disabled"; }; usbphy2: usb-phy@20000 { compatible = "brcm,sr-usb-hs-phy"; - reg = <0x00020000 0x100>; + reg = <0x0 0x00020000 0x0 0x100>; #phy-cells = <0>; status = "disabled"; }; xhci1: usb@11000 { compatible = "generic-xhci"; - reg = <0x00011000 0x1000>; + reg = <0x0 0x00011000 0x0 0x1000>; interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>; phy-names = "phy0", "phy1", "phy2"; @@ -62,7 +62,7 @@ bdc1: usb@21000 { compatible = "brcm,bdc-v0.16"; - reg = <0x00021000 0x1000>; + reg = <0x0 0x00021000 0x0 0x1000>; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy2>; phy-names = "phy0"; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 381a84912ba8..c28d51cc5797 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -10,18 +10,6 @@ model = "NVIDIA Jetson TX2 Developer Kit"; compatible = "nvidia,p2771-0000", "nvidia,tegra186"; - aconnect { - status = "okay"; - - dma-controller@2930000 { - status = "okay"; - }; - - interrupt-controller@2a40000 { - status = "okay"; - }; - }; - i2c@3160000 { power-monitor@42 { compatible = "ti,ina3221"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi index a2893be80507..0dc8304a2edd 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi @@ -54,7 +54,7 @@ status = "okay"; }; - serial@c280000 { + serial@3100000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index e9c90f0f44ff..93438d2b9469 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1161,7 +1161,7 @@ hsp_aon: hsp@c150000 { compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"; - reg = <0x0c150000 0xa0000>; + reg = <0x0c150000 0x90000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index e18e1a9a3011..a9caaf7c0d67 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1663,16 +1663,6 @@ vin-supply = <&vdd_5v0_sys>; }; - vdd_usb_vbus_otg: regulator@11 { - compatible = "regulator-fixed"; - regulator-name = "USB_VBUS_EN0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - vdd_hdmi: regulator@10 { compatible = "regulator-fixed"; regulator-name = "VDD_HDMI_5V0"; @@ -1712,4 +1702,14 @@ enable-active-high; vin-supply = <&vdd_3v3_sys>; }; + + vdd_usb_vbus_otg: regulator@14 { + compatible = "regulator-fixed"; + regulator-name = "USB_VBUS_EN0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts index f6e6a24829af..b5d9a5526272 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts @@ -8,7 +8,7 @@ compatible = "nvidia,tegra234-vdk", "nvidia,tegra234"; aliases { - sdhci3 = "/cbb@0/sdhci@3460000"; + mmc3 = "/bus@0/mmc@3460000"; serial0 = &uarta; }; @@ -17,12 +17,12 @@ stdout-path = "serial0:115200n8"; }; - cbb@0 { + bus@0 { serial@3100000 { status = "okay"; }; - sdhci@3460000 { + mmc@3460000 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index a94dac76bf3f..59e0cbfa2214 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -179,22 +179,22 @@ }; soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x0 0xffffffff>; dma-ranges; compatible = "simple-bus"; prng: qrng@e1000 { compatible = "qcom,prng-ee"; - reg = <0xe3000 0x1000>; + reg = <0x0 0xe3000 0x0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; cryptobam: dma@704000 { compatible = "qcom,bam-v1.7.0"; - reg = <0x00704000 0x20000>; + reg = <0x0 0x00704000 0x0 0x20000>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_CRYPTO_AHB_CLK>; clock-names = "bam_clk"; @@ -206,7 +206,7 @@ crypto: crypto@73a000 { compatible = "qcom,crypto-v5.1"; - reg = <0x0073a000 0x6000>; + reg = <0x0 0x0073a000 0x0 0x6000>; clocks = <&gcc GCC_CRYPTO_AHB_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_CLK>; @@ -217,7 +217,7 @@ tlmm: pinctrl@1000000 { compatible = "qcom,ipq6018-pinctrl"; - reg = <0x01000000 0x300000>; + reg = <0x0 0x01000000 0x0 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -235,7 +235,7 @@ gcc: gcc@1800000 { compatible = "qcom,gcc-ipq6018"; - reg = <0x01800000 0x80000>; + reg = <0x0 0x01800000 0x0 0x80000>; clocks = <&xo>, <&sleep_clk>; clock-names = "xo", "sleep_clk"; #clock-cells = <1>; @@ -244,17 +244,17 @@ tcsr_mutex_regs: syscon@1905000 { compatible = "syscon"; - reg = <0x01905000 0x8000>; + reg = <0x0 0x01905000 0x0 0x8000>; }; tcsr_q6: syscon@1945000 { compatible = "syscon"; - reg = <0x01945000 0xe000>; + reg = <0x0 0x01945000 0x0 0xe000>; }; blsp_dma: dma@7884000 { compatible = "qcom,bam-v1.7.0"; - reg = <0x07884000 0x2b000>; + reg = <0x0 0x07884000 0x0 0x2b000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "bam_clk"; @@ -264,7 +264,7 @@ blsp1_uart3: serial@78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x078b1000 0x200>; + reg = <0x0 0x078b1000 0x0 0x200>; interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -276,7 +276,7 @@ compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; - reg = <0x078b5000 0x600>; + reg = <0x0 0x078b5000 0x0 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, @@ -291,7 +291,7 @@ compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; - reg = <0x078b6000 0x600>; + reg = <0x0 0x078b6000 0x0 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, @@ -306,7 +306,7 @@ compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; - reg = <0x078b6000 0x600>; + reg = <0x0 0x078b6000 0x0 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; @@ -321,7 +321,7 @@ compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; - reg = <0x078b7000 0x600>; + reg = <0x0 0x078b7000 0x0 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; @@ -336,24 +336,24 @@ compatible = "qcom,msm-qgic2"; interrupt-controller; #interrupt-cells = <0x3>; - reg = <0x0b000000 0x1000>, /*GICD*/ - <0x0b002000 0x1000>, /*GICC*/ - <0x0b001000 0x1000>, /*GICH*/ - <0x0b004000 0x1000>; /*GICV*/ + reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ + <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ + <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ + <0x0 0x0b004000 0x0 0x1000>; /*GICV*/ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; watchdog@b017000 { compatible = "qcom,kpss-wdt"; interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; - reg = <0x0b017000 0x40>; + reg = <0x0 0x0b017000 0x0 0x40>; clocks = <&sleep_clk>; timeout-sec = <10>; }; apcs_glb: mailbox@b111000 { compatible = "qcom,ipq6018-apcs-apps-global"; - reg = <0x0b111000 0x1000>; + reg = <0x0 0x0b111000 0x0 0x1000>; #clock-cells = <1>; clocks = <&a53pll>, <&xo>; clock-names = "pll", "xo"; @@ -362,7 +362,7 @@ a53pll: clock@b116000 { compatible = "qcom,ipq6018-a53pll"; - reg = <0x0b116000 0x40>; + reg = <0x0 0x0b116000 0x0 0x40>; #clock-cells = <0>; clocks = <&xo>; clock-names = "xo"; @@ -377,68 +377,68 @@ }; timer@b120000 { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; compatible = "arm,armv7-timer-mem"; - reg = <0x0b120000 0x1000>; + reg = <0x0 0x0b120000 0x0 0x1000>; clock-frequency = <19200000>; frame@b120000 { frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0b121000 0x1000>, - <0x0b122000 0x1000>; + reg = <0x0 0x0b121000 0x0 0x1000>, + <0x0 0x0b122000 0x0 0x1000>; }; frame@b123000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb123000 0x1000>; + reg = <0x0 0xb123000 0x0 0x1000>; status = "disabled"; }; frame@b124000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0b124000 0x1000>; + reg = <0x0 0x0b124000 0x0 0x1000>; status = "disabled"; }; frame@b125000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0b125000 0x1000>; + reg = <0x0 0x0b125000 0x0 0x1000>; status = "disabled"; }; frame@b126000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0b126000 0x1000>; + reg = <0x0 0x0b126000 0x0 0x1000>; status = "disabled"; }; frame@b127000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0b127000 0x1000>; + reg = <0x0 0x0b127000 0x0 0x1000>; status = "disabled"; }; frame@b128000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0b128000 0x1000>; + reg = <0x0 0x0b128000 0x0 0x1000>; status = "disabled"; }; }; q6v5_wcss: remoteproc@cd00000 { compatible = "qcom,ipq8074-wcss-pil"; - reg = <0x0cd00000 0x4040>, - <0x004ab000 0x20>; + reg = <0x0 0x0cd00000 0x0 0x4040>, + <0x0 0x004ab000 0x0 0x20>; reg-names = "qdsp6", "rmb"; interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 35bd6b904b9c..337681038519 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -243,7 +243,6 @@ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; clock-output-names = "rk808-clkout1", "xin32k"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts index be7a31d81632..2ee07d15a6e3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts @@ -20,7 +20,7 @@ gmac_clk: gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; - clock-output-names = "gmac_clk"; + clock-output-names = "gmac_clkin"; #clock-cells = <0>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index e7a459fa4322..20309076dbac 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -74,14 +74,14 @@ label = "red:diy"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "mmc1"; + linux,default-trigger = "mmc2"; }; yellow_led: led-2 { label = "yellow:yellow-led"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "mmc0"; + linux,default-trigger = "mmc1"; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index ada724b12f01..7a9a7aca86c6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -29,6 +29,9 @@ i2c6 = &i2c6; i2c7 = &i2c7; i2c8 = &i2c8; + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; |