summaryrefslogtreecommitdiffstats
path: root/arch/mips/pci/pci-ip27.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci/pci-ip27.c')
-rw-r--r--arch/mips/pci/pci-ip27.c49
1 files changed, 15 insertions, 34 deletions
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index c94a66070a60..3c177b4d0609 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -24,22 +24,11 @@
#define MAX_PCI_BUSSES 40
/*
- * Max #PCI devices (like scsi controllers) we handle on a bus.
- */
-#define MAX_DEVICES_PER_PCIBUS 8
-
-/*
* XXX: No kmalloc available when we do our crosstalk scan,
* we should try to move it later in the boot process.
*/
static struct bridge_controller bridges[MAX_PCI_BUSSES];
-/*
- * Translate from irq to software PCI bus number and PCI slot.
- */
-struct bridge_controller *irq_to_bridge[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS];
-int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS];
-
extern struct pci_ops bridge_pci_ops;
int bridge_probe(nasid_t nasid, int widget_id, int masterwid)
@@ -47,7 +36,6 @@ int bridge_probe(nasid_t nasid, int widget_id, int masterwid)
unsigned long offset = NODE_OFFSET(nasid);
struct bridge_controller *bc;
static int num_bridges = 0;
- bridge_t *bridge;
int slot;
pci_set_flags(PCI_PROBE_ONLY);
@@ -78,7 +66,6 @@ int bridge_probe(nasid_t nasid, int widget_id, int masterwid)
bc->io.end = ~0UL;
bc->io.flags = IORESOURCE_IO;
- bc->irq_cpu = smp_processor_id();
bc->widget_id = widget_id;
bc->nasid = nasid;
@@ -87,45 +74,43 @@ int bridge_probe(nasid_t nasid, int widget_id, int masterwid)
/*
* point to this bridge
*/
- bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id);
+ bc->base = (struct bridge_regs *)RAW_NODE_SWIN_BASE(nasid, widget_id);
/*
* Clear all pending interrupts.
*/
- bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR;
+ bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
/*
* Until otherwise set up, assume all interrupts are from slot 0
*/
- bridge->b_int_device = 0x0;
+ bridge_write(bc, b_int_device, 0x0);
/*
* swap pio's to pci mem and io space (big windows)
*/
- bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
- BRIDGE_CTRL_MEM_SWAP;
+ bridge_set(bc, b_wid_control, BRIDGE_CTRL_IO_SWAP |
+ BRIDGE_CTRL_MEM_SWAP);
#ifdef CONFIG_PAGE_SIZE_4KB
- bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE;
+ bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
#else /* 16kB or larger */
- bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE;
+ bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
#endif
/*
* Hmm... IRIX sets additional bits in the address which
* are documented as reserved in the bridge docs.
*/
- bridge->b_wid_int_upper = 0x8000 | (masterwid << 16);
- bridge->b_wid_int_lower = 0x01800090; /* PI_INT_PEND_MOD off*/
- bridge->b_dir_map = (masterwid << 20); /* DMA */
- bridge->b_int_enable = 0;
+ bridge_write(bc, b_wid_int_upper, 0x8000 | (masterwid << 16));
+ bridge_write(bc, b_wid_int_lower, 0x01800090); /* PI_INT_PEND_MOD off*/
+ bridge_write(bc, b_dir_map, (masterwid << 20)); /* DMA */
+ bridge_write(bc, b_int_enable, 0);
for (slot = 0; slot < 8; slot ++) {
- bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR;
+ bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
bc->pci_int[slot] = -1;
}
- bridge->b_wid_tflush; /* wait until Bridge PIO complete */
-
- bc->base = bridge;
+ bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */
register_pci_controller(&bc->pc);
@@ -168,16 +153,12 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
irq = bc->pci_int[slot];
if (irq == -1) {
- irq = request_bridge_irq(bc);
+ irq = request_bridge_irq(bc, slot);
if (irq < 0)
return irq;
bc->pci_int[slot] = irq;
}
-
- irq_to_bridge[irq] = bc;
- irq_to_slot[irq] = slot;
-
dev->irq = irq;
return 0;
@@ -206,7 +187,7 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
static inline void pci_disable_swapping(struct pci_dev *dev)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- bridge_t *bridge = bc->base;
+ struct bridge_regs *bridge = bc->base;
int slot = PCI_SLOT(dev->devfn);
/* Turn off byte swapping */