diff options
Diffstat (limited to 'arch/powerpc')
83 files changed, 104 insertions, 104 deletions
diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c index 888a6b9bfead..0e5532f855d6 100644 --- a/arch/powerpc/boot/cuboot-hotfoot.c +++ b/arch/powerpc/boot/cuboot-hotfoot.c @@ -70,7 +70,7 @@ static void hotfoot_fixups(void) printf("Fixing devtree for 4M Flash\n"); - /* First fix up the base addresse */ + /* First fix up the base address */ getprop(devp, "reg", regs, sizeof(regs)); regs[0] = 0; regs[1] = 0xffc00000; diff --git a/arch/powerpc/crypto/aes-spe-glue.c b/arch/powerpc/crypto/aes-spe-glue.c index c2b23b69d7b1..e8dfe9fb0266 100644 --- a/arch/powerpc/crypto/aes-spe-glue.c +++ b/arch/powerpc/crypto/aes-spe-glue.c @@ -404,7 +404,7 @@ static int ppc_xts_decrypt(struct skcipher_request *req) /* * Algorithm definitions. Disabling alignment (cra_alignmask=0) was chosen - * because the e500 platform can handle unaligned reads/writes very efficently. + * because the e500 platform can handle unaligned reads/writes very efficiently. * This improves IPsec thoughput by another few percent. Additionally we assume * that AES context is always aligned to at least 8 bytes because it is created * with kmalloc() in the crypto infrastructure diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index ae0fdef0ac11..2a271a6d6924 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -2025,7 +2025,7 @@ static struct cpu_spec * __init setup_cpu_spec(unsigned long offset, * oprofile_cpu_type already has a value, then we are * possibly overriding a real PVR with a logical one, * and, in that case, keep the current value for - * oprofile_cpu_type. Futhermore, let's ensure that the + * oprofile_cpu_type. Furthermore, let's ensure that the * fix for the PMAO bug is enabled on compatibility mode. */ if (old.oprofile_cpu_type != NULL) { diff --git a/arch/powerpc/kernel/dawr.c b/arch/powerpc/kernel/dawr.c index 64e423d2fe0f..30d4eca88d17 100644 --- a/arch/powerpc/kernel/dawr.c +++ b/arch/powerpc/kernel/dawr.c @@ -27,7 +27,7 @@ int set_dawr(int nr, struct arch_hw_breakpoint *brk) dawrx |= (brk->type & (HW_BRK_TYPE_PRIV_ALL)) >> 3; /* * DAWR length is stored in field MDR bits 48:53. Matches range in - * doublewords (64 bits) baised by -1 eg. 0b000000=1DW and + * doublewords (64 bits) biased by -1 eg. 0b000000=1DW and * 0b111111=64DW. * brk->hw_len is in bytes. * This aligns up to double word size, shifts and does the bias. diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 28bb1e7263a6..ab316e155ea9 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -1329,7 +1329,7 @@ int eeh_pe_set_option(struct eeh_pe *pe, int option) /* * EEH functionality could possibly be disabled, just - * return error for the case. And the EEH functinality + * return error for the case. And the EEH functionality * isn't expected to be disabled on one specific PE. */ switch (option) { @@ -1804,7 +1804,7 @@ static int eeh_debugfs_break_device(struct pci_dev *pdev) * PE freeze. Using the in_8() accessor skips the eeh detection hook * so the freeze hook so the EEH Detection machinery won't be * triggered here. This is to match the usual behaviour of EEH - * where the HW will asyncronously freeze a PE and it's up to + * where the HW will asynchronously freeze a PE and it's up to * the kernel to notice and deal with it. * * 3. Turn Memory space back on. This is more important for VFs diff --git a/arch/powerpc/kernel/eeh_event.c b/arch/powerpc/kernel/eeh_event.c index a7a8dc182efb..c23a454af08a 100644 --- a/arch/powerpc/kernel/eeh_event.c +++ b/arch/powerpc/kernel/eeh_event.c @@ -143,7 +143,7 @@ int __eeh_send_failure_event(struct eeh_pe *pe) int eeh_send_failure_event(struct eeh_pe *pe) { /* - * If we've manually supressed recovery events via debugfs + * If we've manually suppressed recovery events via debugfs * then just drop it on the floor. */ if (eeh_debugfs_no_recover) { diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c index b59ee7053bba..a4f5bbda9715 100644 --- a/arch/powerpc/kernel/fadump.c +++ b/arch/powerpc/kernel/fadump.c @@ -1671,8 +1671,8 @@ int __init setup_fadump(void) } /* * Use subsys_initcall_sync() here because there is dependency with - * crash_save_vmcoreinfo_init(), which mush run first to ensure vmcoreinfo initialization - * is done before regisering with f/w. + * crash_save_vmcoreinfo_init(), which must run first to ensure vmcoreinfo initialization + * is done before registering with f/w. */ subsys_initcall_sync(setup_fadump); #else /* !CONFIG_PRESERVE_FA_DUMP */ diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c index a0432ef46967..e25b796682cc 100644 --- a/arch/powerpc/kernel/module_32.c +++ b/arch/powerpc/kernel/module_32.c @@ -99,7 +99,7 @@ static unsigned long get_plt_size(const Elf32_Ehdr *hdr, /* Sort the relocation information based on a symbol and * addend key. This is a stable O(n*log n) complexity - * alogrithm but it will reduce the complexity of + * algorithm but it will reduce the complexity of * count_relocs() to linear complexity O(n) */ sort((void *)hdr + sechdrs[i].sh_offset, diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index 794720530442..2cce576edbc5 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -194,7 +194,7 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr, /* Sort the relocation information based on a symbol and * addend key. This is a stable O(n*log n) complexity - * alogrithm but it will reduce the complexity of + * algorithm but it will reduce the complexity of * count_relocs() to linear complexity O(n) */ sort((void *)sechdrs[i].sh_addr, @@ -361,7 +361,7 @@ static inline int create_ftrace_stub(struct ppc64_stub_entry *entry, entry->jump[1] |= PPC_HA(reladdr); entry->jump[2] |= PPC_LO(reladdr); - /* Eventhough we don't use funcdata in the stub, it's needed elsewhere. */ + /* Even though we don't use funcdata in the stub, it's needed elsewhere. */ entry->funcdata = func_desc(addr); entry->magic = STUB_MAGIC; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 8bc9cf62cd93..9a97a93bd11c 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1688,7 +1688,7 @@ EXPORT_SYMBOL_GPL(pcibios_scan_phb); static void fixup_hide_host_resource_fsl(struct pci_dev *dev) { int i, class = dev->class >> 8; - /* When configured as agent, programing interface = 1 */ + /* When configured as agent, programming interface = 1 */ int prog_if = dev->class & 0xf; if ((class == PCI_CLASS_PROCESSOR_POWERPC || diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index c3024f104765..6f2b0cc1ddd6 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -244,7 +244,7 @@ EXPORT_SYMBOL(of_create_pci_dev); * @dev: pci_dev structure for the bridge * * of_scan_bus() calls this routine for each PCI bridge that it finds, and - * this routine in turn call of_scan_bus() recusively to scan for more child + * this routine in turn call of_scan_bus() recursively to scan for more child * devices. */ void of_scan_pci_bridge(struct pci_dev *dev) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index e7f809bdd433..d92fb53dab56 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -305,7 +305,7 @@ static void __giveup_vsx(struct task_struct *tsk) unsigned long msr = tsk->thread.regs->msr; /* - * We should never be ssetting MSR_VSX without also setting + * We should never be setting MSR_VSX without also setting * MSR_FP and MSR_VEC */ WARN_ON((msr & MSR_VSX) && !((msr & MSR_FP) && (msr & MSR_VEC))); @@ -643,7 +643,7 @@ static void do_break_handler(struct pt_regs *regs) return; } - /* Otherwise findout which DAWR caused exception and disable it. */ + /* Otherwise find out which DAWR caused exception and disable it. */ wp_get_instr_detail(regs, &instr, &type, &size, &ea); for (i = 0; i < nr_wp_slots(); i++) { diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 0ac5faacc909..ace861ec4c4c 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -3416,7 +3416,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * * PowerMacs use a different mechanism to spin CPUs * - * (This must be done after instanciating RTAS) + * (This must be done after instantiating RTAS) */ if (of_platform != PLATFORM_POWERMAC) prom_hold_cpus(); diff --git a/arch/powerpc/kernel/ptrace/ptrace-view.c b/arch/powerpc/kernel/ptrace/ptrace-view.c index f15bc78caf71..076d867412c7 100644 --- a/arch/powerpc/kernel/ptrace/ptrace-view.c +++ b/arch/powerpc/kernel/ptrace/ptrace-view.c @@ -174,7 +174,7 @@ int ptrace_get_reg(struct task_struct *task, int regno, unsigned long *data) /* * softe copies paca->irq_soft_mask variable state. Since irq_soft_mask is - * no more used as a flag, lets force usr to alway see the softe value as 1 + * no more used as a flag, lets force usr to always see the softe value as 1 * which means interrupts are not soft disabled. */ if (IS_ENABLED(CONFIG_PPC64) && regno == PT_SOFTE) { diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index a99179d83538..bc817a5619d6 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -120,7 +120,7 @@ static struct kmem_cache *flash_block_cache = NULL; /* * Local copy of the flash block list. * - * The rtas_firmware_flash_list varable will be + * The rtas_firmware_flash_list variable will be * set once the data is fully read. * * For convenience as we build the list we use virtual addrs, diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 518ae5aa9410..3acf2782acdf 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -279,7 +279,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) proc_freq / 1000000, proc_freq % 1000000); /* If we are a Freescale core do a simple check so - * we dont have to keep adding cases in the future */ + * we don't have to keep adding cases in the future */ if (PVR_VER(pvr) & 0x8000) { switch (PVR_VER(pvr)) { case 0x8000: /* 7441/7450/7451, Voyager */ diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 73d483b07ff3..858fc13b8c51 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -123,7 +123,7 @@ static long notrace __unsafe_setup_sigcontext(struct sigcontext __user *sc, #endif struct pt_regs *regs = tsk->thread.regs; unsigned long msr = regs->msr; - /* Force usr to alway see softe as 1 (interrupts enabled) */ + /* Force usr to always see softe as 1 (interrupts enabled) */ unsigned long softe = 0x1; BUG_ON(tsk != current); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index de0f6f09a5dd..a69df557e2b7 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -1102,7 +1102,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) DBG("smp_prepare_cpus\n"); /* - * setup_cpu may need to be called on the boot cpu. We havent + * setup_cpu may need to be called on the boot cpu. We haven't * spun any cpus up but lets be paranoid. */ BUG_ON(boot_cpuid != smp_processor_id()); diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 6d97f9e586f0..e334de41b408 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -828,7 +828,7 @@ static void __read_persistent_clock(struct timespec64 *ts) static int first = 1; ts->tv_nsec = 0; - /* XXX this is a litle fragile but will work okay in the short term */ + /* XXX this is a little fragile but will work okay in the short term */ if (first) { first = 0; if (ppc_md.time_init) @@ -973,7 +973,7 @@ void secondary_cpu_time_init(void) */ start_cpu_decrementer(); - /* FIME: Should make unrelatred change to move snapshot_timebase + /* FIME: Should make unrelated change to move snapshot_timebase * call here ! */ register_decrementer_clockevent(smp_processor_id()); } diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c index bfc27496fe7e..7d28b9553654 100644 --- a/arch/powerpc/kernel/watchdog.c +++ b/arch/powerpc/kernel/watchdog.c @@ -56,7 +56,7 @@ * solved by also having a SMP watchdog where all CPUs check all other * CPUs heartbeat. * - * The SMP checker can detect lockups on other CPUs. A gobal "pending" + * The SMP checker can detect lockups on other CPUs. A global "pending" * cpumask is kept, containing all CPUs which enable the watchdog. Each * CPU clears their pending bit in their heartbeat timer. When the bitmask * becomes empty, the last CPU to clear its pending bit updates a global diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c index 6cc7793b8420..c29c639551fe 100644 --- a/arch/powerpc/kexec/core_64.c +++ b/arch/powerpc/kexec/core_64.c @@ -406,7 +406,7 @@ static int __init export_htab_values(void) if (!node) return -ENODEV; - /* remove any stale propertys so ours can be found */ + /* remove any stale properties so ours can be found */ of_remove_property(node, of_find_property(node, htab_base_prop.name, NULL)); of_remove_property(node, of_find_property(node, htab_size_prop.name, NULL)); diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c index 0aeb51738ca9..1137c4df726c 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c @@ -58,7 +58,7 @@ struct kvm_resize_hpt { /* Possible values and their usage: * <0 an error occurred during allocation, * -EBUSY allocation is in the progress, - * 0 allocation made successfuly. + * 0 allocation made successfully. */ int error; diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c index fdeda6a9cff4..fdcc7b287dd8 100644 --- a/arch/powerpc/kvm/book3s_64_vio_hv.c +++ b/arch/powerpc/kvm/book3s_64_vio_hv.c @@ -453,7 +453,7 @@ static long kvmppc_rm_ua_to_hpa(struct kvm_vcpu *vcpu, unsigned long mmu_seq, * we are doing this on secondary cpus and current task there * is not the hypervisor. Also this is safe against THP in the * host, because an IPI to primary thread will wait for the secondary - * to exit which will agains result in the below page table walk + * to exit which will again result in the below page table walk * to finish. */ /* an rmap lock won't make it safe. because that just ensure hash diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c index fdb57be71aa6..5bbfb2eed127 100644 --- a/arch/powerpc/kvm/book3s_emulate.c +++ b/arch/powerpc/kvm/book3s_emulate.c @@ -268,7 +268,7 @@ int kvmppc_core_emulate_op_pr(struct kvm_vcpu *vcpu, /* * add rules to fit in ISA specification regarding TM - * state transistion in TM disable/Suspended state, + * state transition in TM disable/Suspended state, * and target TM state is TM inactive(00) state. (the * change should be suppressed). */ diff --git a/arch/powerpc/kvm/book3s_hv_p9_entry.c b/arch/powerpc/kvm/book3s_hv_p9_entry.c index a28e5b3daabd..ac38c1cad378 100644 --- a/arch/powerpc/kvm/book3s_hv_p9_entry.c +++ b/arch/powerpc/kvm/book3s_hv_p9_entry.c @@ -379,7 +379,7 @@ void restore_p9_host_os_sprs(struct kvm_vcpu *vcpu, { /* * current->thread.xxx registers must all be restored to host - * values before a potential context switch, othrewise the context + * values before a potential context switch, otherwise the context * switch itself will overwrite current->thread.xxx with the values * from the guest SPRs. */ diff --git a/arch/powerpc/kvm/book3s_hv_uvmem.c b/arch/powerpc/kvm/book3s_hv_uvmem.c index 45c993dd05f5..0f66f7fbfb80 100644 --- a/arch/powerpc/kvm/book3s_hv_uvmem.c +++ b/arch/powerpc/kvm/book3s_hv_uvmem.c @@ -120,7 +120,7 @@ static DEFINE_SPINLOCK(kvmppc_uvmem_bitmap_lock); * content is un-encrypted. * * (c) Normal - The GFN is a normal. The GFN is associated with - * a normal VM. The contents of the GFN is accesible to + * a normal VM. The contents of the GFN is accessible to * the Hypervisor. Its content is never encrypted. * * States of a VM. diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c index 7bf9e6ca5c2d..d6abed6e51e6 100644 --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -1287,7 +1287,7 @@ int kvmppc_handle_exit_pr(struct kvm_vcpu *vcpu, unsigned int exit_nr) /* Get last sc for papr */ if (vcpu->arch.papr_enabled) { - /* The sc instuction points SRR0 to the next inst */ + /* The sc instruction points SRR0 to the next inst */ emul = kvmppc_get_last_inst(vcpu, INST_SC, &last_sc); if (emul != EMULATE_DONE) { kvmppc_set_pc(vcpu, kvmppc_get_pc(vcpu) - 4); diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c index ab6d37d78c62..589a8f257120 100644 --- a/arch/powerpc/kvm/book3s_xics.c +++ b/arch/powerpc/kvm/book3s_xics.c @@ -462,7 +462,7 @@ static void icp_deliver_irq(struct kvmppc_xics *xics, struct kvmppc_icp *icp, * new guy. We cannot assume that the rejected interrupt is less * favored than the new one, and thus doesn't need to be delivered, * because by the time we exit icp_try_to_deliver() the target - * processor may well have alrady consumed & completed it, and thus + * processor may well have already consumed & completed it, and thus * the rejected interrupt might actually be already acceptable. */ if (icp_try_to_deliver(icp, new_irq, state->priority, &reject)) { diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c index c0ce5531d9bc..24d434f1f012 100644 --- a/arch/powerpc/kvm/book3s_xive.c +++ b/arch/powerpc/kvm/book3s_xive.c @@ -124,7 +124,7 @@ void kvmppc_xive_push_vcpu(struct kvm_vcpu *vcpu) * interrupt might have fired and be on its way to the * host queue while we mask it, and if we unmask it * early enough (re-cede right away), there is a - * theorical possibility that it fires again, thus + * theoretical possibility that it fires again, thus * landing in the target queue more than once which is * a big no-no. * @@ -622,7 +622,7 @@ static int xive_target_interrupt(struct kvm *kvm, /* * Targetting rules: In order to avoid losing track of - * pending interrupts accross mask and unmask, which would + * pending interrupts across mask and unmask, which would * allow queue overflows, we implement the following rules: * * - Unless it was never enabled (or we run out of capacity) @@ -1073,7 +1073,7 @@ int kvmppc_xive_clr_mapped(struct kvm *kvm, unsigned long guest_irq, /* * If old_p is set, the interrupt is pending, we switch it to * PQ=11. This will force a resend in the host so the interrupt - * isn't lost to whatver host driver may pick it up + * isn't lost to whatever host driver may pick it up */ if (state->old_p) xive_vm_esb_load(state->pt_data, XIVE_ESB_SET_PQ_11); diff --git a/arch/powerpc/kvm/e500mc.c b/arch/powerpc/kvm/e500mc.c index fa0d8dbbe484..4ff1372e48d4 100644 --- a/arch/powerpc/kvm/e500mc.c +++ b/arch/powerpc/kvm/e500mc.c @@ -309,7 +309,7 @@ static int kvmppc_core_vcpu_create_e500mc(struct kvm_vcpu *vcpu) BUILD_BUG_ON(offsetof(struct kvmppc_vcpu_e500, vcpu) != 0); vcpu_e500 = to_e500(vcpu); - /* Invalid PIR value -- this LPID dosn't have valid state on any cpu */ + /* Invalid PIR value -- this LPID doesn't have valid state on any cpu */ vcpu->arch.oldpir = 0xffffffff; err = kvmppc_e500_tlb_init(vcpu_e500); diff --git a/arch/powerpc/mm/book3s64/hash_pgtable.c b/arch/powerpc/mm/book3s64/hash_pgtable.c index 7ce8914992e3..2e0cad5817ba 100644 --- a/arch/powerpc/mm/book3s64/hash_pgtable.c +++ b/arch/powerpc/mm/book3s64/hash_pgtable.c @@ -377,7 +377,7 @@ int hash__has_transparent_hugepage(void) if (mmu_psize_defs[MMU_PAGE_16M].shift != PMD_SHIFT) return 0; /* - * We need to make sure that we support 16MB hugepage in a segement + * We need to make sure that we support 16MB hugepage in a segment * with base page size 64K or 4K. We only enable THP with a PAGE_SIZE * of 64K. */ diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c index 72a3eca02449..20662d378fd4 100644 --- a/arch/powerpc/mm/book3s64/hash_utils.c +++ b/arch/powerpc/mm/book3s64/hash_utils.c @@ -1338,7 +1338,7 @@ static int subpage_protection(struct mm_struct *mm, unsigned long ea) spp >>= 30 - 2 * ((ea >> 12) & 0xf); /* - * 0 -> full premission + * 0 -> full permission * 1 -> Read only * 2 -> no access. * We return the flag that need to be cleared. @@ -1659,7 +1659,7 @@ DEFINE_INTERRUPT_HANDLER(do_hash_fault) err = hash_page_mm(mm, ea, access, TRAP(regs), flags); if (unlikely(err < 0)) { - // failed to instert a hash PTE due to an hypervisor error + // failed to insert a hash PTE due to an hypervisor error if (user_mode(regs)) { if (IS_ENABLED(CONFIG_PPC_SUBPAGE_PROT) && err == -2) _exception(SIGSEGV, regs, SEGV_ACCERR, ea); diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c index 052e6590f84f..071bb66c3ad9 100644 --- a/arch/powerpc/mm/book3s64/pgtable.c +++ b/arch/powerpc/mm/book3s64/pgtable.c @@ -331,7 +331,7 @@ static pmd_t *__alloc_for_pmdcache(struct mm_struct *mm) spin_lock(&mm->page_table_lock); /* * If we find pgtable_page set, we return - * the allocated page with single fragement + * the allocated page with single fragment * count. */ if (likely(!mm->context.pmd_frag)) { diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c index def04631a74d..db2f3d193448 100644 --- a/arch/powerpc/mm/book3s64/radix_pgtable.c +++ b/arch/powerpc/mm/book3s64/radix_pgtable.c @@ -359,7 +359,7 @@ static void __init radix_init_pgtable(void) if (!cpu_has_feature(CPU_FTR_HVMODE) && cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG)) { /* - * Older versions of KVM on these machines perfer if the + * Older versions of KVM on these machines prefer if the * guest only uses the low 19 PID bits. */ mmu_pid_bits = 19; diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c index 7724af19ed7e..dda51fef2d2e 100644 --- a/arch/powerpc/mm/book3s64/radix_tlb.c +++ b/arch/powerpc/mm/book3s64/radix_tlb.c @@ -397,7 +397,7 @@ static inline void _tlbie_pid(unsigned long pid, unsigned long ric) /* * Workaround the fact that the "ric" argument to __tlbie_pid - * must be a compile-time contraint to match the "i" constraint + * must be a compile-time constraint to match the "i" constraint * in the asm statement. */ switch (ric) { diff --git a/arch/powerpc/mm/book3s64/slb.c b/arch/powerpc/mm/book3s64/slb.c index 81091b9587f6..6956f637a38c 100644 --- a/arch/powerpc/mm/book3s64/slb.c +++ b/arch/powerpc/mm/book3s64/slb.c @@ -347,7 +347,7 @@ void slb_setup_new_exec(void) /* * We have no good place to clear the slb preload cache on exec, * flush_thread is about the earliest arch hook but that happens - * after we switch to the mm and have aleady preloaded the SLBEs. + * after we switch to the mm and have already preloaded the SLBEs. * * For the most part that's probably okay to use entries from the * previous exec, they will age out if unused. It may turn out to @@ -615,7 +615,7 @@ static void slb_cache_update(unsigned long esid_data) } else { /* * Our cache is full and the current cache content strictly - * doesn't indicate the active SLB conents. Bump the ptr + * doesn't indicate the active SLB contents. Bump the ptr * so that switch_slb() will ignore the cache. */ local_paca->slb_cache_ptr = SLB_CACHE_ENTRIES + 1; diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 83c0ee9fbf05..2e11952057f8 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -111,7 +111,7 @@ static int __meminit vmemmap_populated(unsigned long vmemmap_addr, int vmemmap_m } /* - * vmemmap virtual address space management does not have a traditonal page + * vmemmap virtual address space management does not have a traditional page * table to track which virtual struct pages are backed by physical mapping. * The virtual to physical mappings are tracked in a simple linked list * format. 'vmemmap_list' maintains the entire vmemmap physical mapping at @@ -128,7 +128,7 @@ static struct vmemmap_backing *next; /* * The same pointer 'next' tracks individual chunks inside the allocated - * full page during the boot time and again tracks the freeed nodes during + * full page during the boot time and again tracks the freed nodes during * runtime. It is racy but it does not happen as they are separated by the * boot process. Will create problem if some how we have memory hotplug * operation during boot !! diff --git a/arch/powerpc/mm/nohash/book3e_hugetlbpage.c b/arch/powerpc/mm/nohash/book3e_hugetlbpage.c index 8b88be91b622..307ca919d393 100644 --- a/arch/powerpc/mm/nohash/book3e_hugetlbpage.c +++ b/arch/powerpc/mm/nohash/book3e_hugetlbpage.c @@ -142,7 +142,7 @@ book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, pte_t pte) tsize = shift - 10; /* * We can't be interrupted while we're setting up the MAS - * regusters or after we've confirmed that no tlb exists. + * registers or after we've confirmed that no tlb exists. */ local_irq_save(flags); diff --git a/arch/powerpc/mm/nohash/kaslr_booke.c b/arch/powerpc/mm/nohash/kaslr_booke.c index 96c38f971603..636ec583d989 100644 --- a/arch/powerpc/mm/nohash/kaslr_booke.c +++ b/arch/powerpc/mm/nohash/kaslr_booke.c @@ -315,7 +315,7 @@ static unsigned long __init kaslr_choose_location(void *dt_ptr, phys_addr_t size ram = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, true, true); linear_sz = min_t(unsigned long, ram, SZ_512M); - /* If the linear size is smaller than 64M, do not randmize */ + /* If the linear size is smaller than 64M, do not randomize */ if (linear_sz < SZ_64M) return 0; diff --git a/arch/powerpc/mm/pgtable-frag.c b/arch/powerpc/mm/pgtable-frag.c index 97ae4935da79..20652daa1d7e 100644 --- a/arch/powerpc/mm/pgtable-frag.c +++ b/arch/powerpc/mm/pgtable-frag.c @@ -83,7 +83,7 @@ static pte_t *__alloc_for_ptecache(struct mm_struct *mm, int kernel) spin_lock(&mm->page_table_lock); /* * If we find pgtable_page set, we return - * the allocated page with single fragement + * the allocated page with single fragment * count. */ if (likely(!pte_frag_get(&mm->context))) { diff --git a/arch/powerpc/perf/8xx-pmu.c b/arch/powerpc/perf/8xx-pmu.c index 4738c4dbf567..308a2e40d7be 100644 --- a/arch/powerpc/perf/8xx-pmu.c +++ b/arch/powerpc/perf/8xx-pmu.c @@ -157,7 +157,7 @@ static void mpc8xx_pmu_del(struct perf_event *event, int flags) mpc8xx_pmu_read(event); - /* If it was the last user, stop counting to avoid useles overhead */ + /* If it was the last user, stop counting to avoid useless overhead */ switch (event_type(event)) { case PERF_8xx_ID_CPU_CYCLES: break; diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index b5b42cf0a703..140502a7fdf8 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1142,7 +1142,7 @@ static u64 check_and_compute_delta(u64 prev, u64 val) /* * POWER7 can roll back counter values, if the new value is smaller * than the previous value it will cause the delta and the counter to - * have bogus values unless we rolled a counter over. If a coutner is + * have bogus values unless we rolled a counter over. If a counter is * rolled back, it will be smaller, but within 256, which is the maximum * number of events to rollback at once. If we detect a rollback * return 0. This can lead to a small lack of precision in the @@ -2057,7 +2057,7 @@ static int power_pmu_event_init(struct perf_event *event) /* * PMU config registers have fields that are * reserved and some specific values for bit fields are reserved. - * For ex., MMCRA[61:62] is Randome Sampling Mode (SM) + * For ex., MMCRA[61:62] is Random Sampling Mode (SM) * and value of 0b11 to this field is reserved. * Check for invalid values in attr.config. */ @@ -2447,7 +2447,7 @@ static void __perf_event_interrupt(struct pt_regs *regs) } /* - * During system wide profling or while specific CPU is monitored for an + * During system wide profiling or while specific CPU is monitored for an * event, some corner cases could cause PMC to overflow in idle path. This * will trigger a PMI after waking up from idle. Since counter values are _not_ * saved/restored in idle path, can lead to below "Can't find PMC" message. diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c index 526d4b767534..498f1a2f7658 100644 --- a/arch/powerpc/perf/imc-pmu.c +++ b/arch/powerpc/perf/imc-pmu.c @@ -521,7 +521,7 @@ static int nest_imc_event_init(struct perf_event *event) /* * Nest HW counter memory resides in a per-chip reserve-memory (HOMER). - * Get the base memory addresss for this cpu. + * Get the base memory address for this cpu. */ chip_id = cpu_to_chip_id(event->cpu); @@ -674,7 +674,7 @@ static int ppc_core_imc_cpu_offline(unsigned int cpu) /* * Check whether core_imc is registered. We could end up here * if the cpuhotplug callback registration fails. i.e, callback - * invokes the offline path for all sucessfully registered cpus. + * invokes the offline path for all successfully registered cpus. * At this stage, core_imc pmu will not be registered and we * should return here. * diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c index a74d382ecbb7..839cc68212c1 100644 --- a/arch/powerpc/perf/isa207-common.c +++ b/arch/powerpc/perf/isa207-common.c @@ -82,11 +82,11 @@ static unsigned long sdar_mod_val(u64 event) static void mmcra_sdar_mode(u64 event, unsigned long *mmcra) { /* - * MMCRA[SDAR_MODE] specifices how the SDAR should be updated in - * continous sampling mode. + * MMCRA[SDAR_MODE] specifies how the SDAR should be updated in + * continuous sampling mode. * * Incase of Power8: - * MMCRA[SDAR_MODE] will be programmed as "0b01" for continous sampling + * MMCRA[SDAR_MODE] will be programmed as "0b01" for continuous sampling * mode and will be un-changed when setting MMCRA[63] (Marked events). * * Incase of Power9/power10: diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c index 0b03d812baae..0652c7e69225 100644 --- a/arch/powerpc/platforms/512x/clock-commonclk.c +++ b/arch/powerpc/platforms/512x/clock-commonclk.c @@ -663,7 +663,7 @@ static void __init mpc512x_clk_setup_mclk(struct mclk_setup_data *entry, size_t * the PSC/MSCAN/SPDIF (serial drivers et al) need the MCLK * for their bitrate * - in the absence of "aliases" for clocks we need to create - * individial 'struct clk' items for whatever might get + * individual 'struct clk' items for whatever might get * referenced or looked up, even if several of those items are * identical from the logical POV (their rate value) * - for easier future maintenance and for better reflection of diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index e3411663edad..96d9cf49560d 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -289,7 +289,7 @@ static void __init mpc512x_setup_diu(void) /* * We do not allocate and configure new area for bitmap buffer - * because it would requere copying bitmap data (splash image) + * because it would require copying bitmap data (splash image) * and so negatively affect boot time. Instead we reserve the * already configured frame buffer area so that it won't be * destroyed. The starting address of the area to reserve and diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 565e3a83dc9e..60aa6015e284 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -308,7 +308,7 @@ int mpc5200_psc_ac97_gpio_reset(int psc_number) spin_lock_irqsave(&gpio_lock, flags); - /* Reconfiure pin-muxing to gpio */ + /* Reconfigure pin-muxing to gpio */ mux = in_be32(&simple_gpio->port_config); out_be32(&simple_gpio->port_config, mux & (~gpio)); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index 0cb248269db7..03e9bf7c0773 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -398,7 +398,7 @@ static int mpc52xx_gpt_do_start(struct mpc52xx_gpt_priv *gpt, u64 period, set |= MPC52xx_GPT_MODE_CONTINUOUS; /* Determine the number of clocks in the requested period. 64 bit - * arithmatic is done here to preserve the precision until the value + * arithmetic is done here to preserve the precision until the value * is scaled back down into the u32 range. Period is in 'ns', bus * frequency is in Hz. */ clocks = period * (u64)gpt->ipb_freq; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index b91ebebd9ff2..54dfc63809d3 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -104,7 +104,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req) * * Configure the watermarks so DMA will always complete correctly. * It may be worth experimenting with the ALARM value to see if - * there is a performance impacit. However, if it is wrong there + * there is a performance impact. However, if it is wrong there * is a risk of DMA not transferring the last chunk of data */ if (write) { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 5bd487030256..ad0b88ecfd0c 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -151,7 +151,7 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev) */ case PCI_DEVICE_ID_VIA_82C586_2: /* There are two USB controllers. - * Identify them by functon number + * Identify them by function number */ if (PCI_FUNC(dev->devfn) == 3) dev->irq = 11; diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c index 44bbbc535e1d..884da08806ce 100644 --- a/arch/powerpc/platforms/86xx/gef_ppc9a.c +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c @@ -180,7 +180,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, * * This function is called to determine whether the BSP is compatible with the * supplied device-tree, which is assumed to be the correct one for the actual - * board. It is expected thati, in the future, a kernel may support multiple + * board. It is expected that, in the future, a kernel may support multiple * boards. */ static int __init gef_ppc9a_probe(void) diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c index 46d6d3d4957a..baaf1ab07016 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc310.c +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c @@ -167,7 +167,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, * * This function is called to determine whether the BSP is compatible with the * supplied device-tree, which is assumed to be the correct one for the actual - * board. It is expected thati, in the future, a kernel may support multiple + * board. It is expected that, in the future, a kernel may support multiple * boards. */ static int __init gef_sbc310_probe(void) diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index acf2c6c3c1eb..120caf6af71d 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -157,7 +157,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, * * This function is called to determine whether the BSP is compatible with the * supplied device-tree, which is assumed to be the correct one for the actual - * board. It is expected thati, in the future, a kernel may support multiple + * board. It is expected that, in the future, a kernel may support multiple * boards. */ static int __init gef_sbc610_probe(void) diff --git a/arch/powerpc/platforms/book3s/vas-api.c b/arch/powerpc/platforms/book3s/vas-api.c index f9a1615b74da..c0799fb26b6d 100644 --- a/arch/powerpc/platforms/book3s/vas-api.c +++ b/arch/powerpc/platforms/book3s/vas-api.c @@ -30,7 +30,7 @@ * * where "vas_copy" and "vas_paste" are defined in copy-paste.h. * copy/paste returns to the user space directly. So refer NX hardware - * documententation for exact copy/paste usage and completion / error + * documentation for exact copy/paste usage and completion / error * conditions. */ diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c index 1c4c53bec66c..03512a41bd7e 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.c +++ b/arch/powerpc/platforms/cell/cbe_regs.c @@ -23,7 +23,7 @@ * Current implementation uses "cpu" nodes. We build our own mapping * array of cpu numbers to cpu nodes locally for now to allow interrupt * time code to have a fast path rather than call of_get_cpu_node(). If - * we implement cpu hotplug, we'll have to install an appropriate norifier + * we implement cpu hotplug, we'll have to install an appropriate notifier * in order to release references to the cpu going away */ static struct cbe_regs_map diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 25e726bf0172..3f141cf5e580 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -582,7 +582,7 @@ static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action, { struct device *dev = data; - /* We are only intereted in device addition */ + /* We are only interested in device addition */ if (action != BUS_NOTIFY_ADD_DEVICE) return 0; diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c index a1c293f42a1f..3a2ea8376e32 100644 --- a/arch/powerpc/platforms/cell/spider-pci.c +++ b/arch/powerpc/platforms/cell/spider-pci.c @@ -81,7 +81,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb, /* * On CellBlade, we can't know that which XDR memory is used by * kmalloc() to allocate dummy_page_va. - * In order to imporve the performance, the XDR which is used to + * In order to improve the performance, the XDR which is used to * allocate dummy_page_va is the nearest the spider-pci. * We have to select the CBE which is the nearest the spider-pci * to allocate memory from the best XDR, but I don't know that diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index ddf8742f09a3..080ed2d2c682 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -457,7 +457,7 @@ static void __init init_affinity_node(int cbe) /* * Walk through each phandle in vicinity property of the spu - * (tipically two vicinity phandles per spe node) + * (typically two vicinity phandles per spe node) */ for (i = 0; i < (lenp / sizeof(phandle)); i++) { if (vic_handles[i] == avoid_ph) diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index df89d916236d..9aded0188ce8 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -1472,7 +1472,7 @@ int __init pmac_i2c_init(void) smu_i2c_probe(); #endif - /* Now add plaform functions for some known devices */ + /* Now add platform functions for some known devices */ pmac_i2c_devscan(pmac_i2c_dev_create); return 0; diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 89e22c460ebf..33f7b959c810 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -390,7 +390,7 @@ static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev) * should be blocked until PE reset. MMIO access is dropped * by hardware certainly. In order to drop PCI config requests, * one more flag (EEH_PE_CFG_RESTRICTED) is introduced, which - * will be checked in the backend for PE state retrival. If + * will be checked in the backend for PE state retrieval. If * the PE becomes frozen for the first time and the flag has * been set for the PE, we will set EEH_PE_CFG_BLOCKED for * that PE to block its config space. @@ -981,7 +981,7 @@ static int pnv_eeh_do_af_flr(struct pci_dn *pdn, int option) case EEH_RESET_FUNDAMENTAL: /* * Wait for Transaction Pending bit to clear. A word-aligned - * test is used, so we use the conrol offset rather than status + * test is used, so we use the control offset rather than status * and shift the test bit to match. */ pnv_eeh_wait_for_pending(pdn, "AF", @@ -1048,7 +1048,7 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option) * frozen state during PE reset. However, the good idea here from * benh is to keep frozen state before we get PE reset done completely * (until BAR restore). With the frozen state, HW drops illegal IO - * or MMIO access, which can incur recrusive frozen PE during PE + * or MMIO access, which can incur recursive frozen PE during PE * reset. The side effect is that EEH core has to clear the frozen * state explicitly after BAR restore. */ @@ -1095,8 +1095,8 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option) * bus is behind a hotplug slot and it will use the slot provided * reset methods to prevent spurious hotplug events during the reset. * - * Fundemental resets need to be handled internally to EEH since the - * PCI core doesn't really have a concept of a fundemental reset, + * Fundamental resets need to be handled internally to EEH since the + * PCI core doesn't really have a concept of a fundamental reset, * mainly because there's no standard way to generate one. Only a * few devices require an FRESET so it should be fine. */ diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c index a6677a111aca..6f94b808dd39 100644 --- a/arch/powerpc/platforms/powernv/idle.c +++ b/arch/powerpc/platforms/powernv/idle.c @@ -112,7 +112,7 @@ static int __init pnv_save_sprs_for_deep_states(void) if (rc != 0) return rc; - /* Only p8 needs to set extra HID regiters */ + /* Only p8 needs to set extra HID registers */ if (!cpu_has_feature(CPU_FTR_ARCH_300)) { uint64_t hid1_val = mfspr(SPRN_HID1); uint64_t hid4_val = mfspr(SPRN_HID4); @@ -1204,7 +1204,7 @@ static void __init pnv_arch300_idle_init(void) * The idle code does not deal with TB loss occurring * in a shallower state than SPR loss, so force it to * behave like SPRs are lost if TB is lost. POWER9 would - * never encouter this, but a POWER8 core would if it + * never encounter this, but a POWER8 core would if it * implemented the stop instruction. So this is for forward * compatibility. */ diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c index 28b009b46464..27c936075031 100644 --- a/arch/powerpc/platforms/powernv/ocxl.c +++ b/arch/powerpc/platforms/powernv/ocxl.c @@ -289,7 +289,7 @@ int pnv_ocxl_get_pasid_count(struct pci_dev *dev, int *count) * be used by a function depends on how many functions exist * on the device. The NPU needs to be configured to know how * many bits are available to PASIDs and how many are to be - * used by the function BDF indentifier. + * used by the function BDF identifier. * * We only support one AFU-carrying function for now. */ diff --git a/arch/powerpc/platforms/powernv/opal-fadump.c b/arch/powerpc/platforms/powernv/opal-fadump.c index 5e147f32e932..964f464b1b0e 100644 --- a/arch/powerpc/platforms/powernv/opal-fadump.c +++ b/arch/powerpc/platforms/powernv/opal-fadump.c @@ -206,7 +206,7 @@ static u64 opal_fadump_init_mem_struct(struct fw_dump *fadump_conf) opal_fdm->region_cnt = cpu_to_be16(reg_cnt); /* - * Kernel metadata is passed to f/w and retrieved in capture kerenl. + * Kernel metadata is passed to f/w and retrieved in capture kernel. * So, use it to save fadump header address instead of calculating it. */ opal_fdm->fadumphdr_addr = cpu_to_be64(be64_to_cpu(opal_fdm->rgn[0].dest) + diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c index 5390c888db16..d129d6d45a50 100644 --- a/arch/powerpc/platforms/powernv/opal-lpc.c +++ b/arch/powerpc/platforms/powernv/opal-lpc.c @@ -197,7 +197,7 @@ static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf, /* * Select access size based on count and alignment and - * access type. IO and MEM only support byte acceses, + * access type. IO and MEM only support byte accesses, * FW supports all 3. */ len = 1; diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c index 1e8e17df9ce8..a1754a28265d 100644 --- a/arch/powerpc/platforms/powernv/opal-memory-errors.c +++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c @@ -82,7 +82,7 @@ static DECLARE_WORK(mem_error_work, mem_error_handler); /* * opal_memory_err_event - notifier handler that queues up the opal message - * to be preocessed later. + * to be processed later. */ static int opal_memory_err_event(struct notifier_block *nb, unsigned long msg_type, void *msg) diff --git a/arch/powerpc/platforms/powernv/pci-sriov.c b/arch/powerpc/platforms/powernv/pci-sriov.c index 04155aaaadb1..fe3d111b881c 100644 --- a/arch/powerpc/platforms/powernv/pci-sriov.c +++ b/arch/powerpc/platforms/powernv/pci-sriov.c @@ -699,7 +699,7 @@ static int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs) return -ENOSPC; } - /* allocate a contigious block of PEs for our VFs */ + /* allocate a contiguous block of PEs for our VFs */ base_pe = pnv_ioda_alloc_pe(phb, num_vfs); if (!base_pe) { pci_err(pdev, "Unable to allocate PEs for %d VFs\n", num_vfs); diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 5ce924611b94..63ef61ed7597 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -364,7 +364,7 @@ static void __maybe_unused _dma_dump_region(const struct ps3_dma_region *r, * @bus_addr: Starting ioc bus address of the area to map. * @len: Length in bytes of the area to map. * @link: A struct list_head used with struct ps3_dma_region.chunk_list, the - * list of all chuncks owned by the region. + * list of all chunks owned by the region. * * This implementation uses a very simple dma page manager * based on the dma_chunk structure. This scheme assumes diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index b637bf292047..2502e9b17df4 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -601,7 +601,7 @@ static dma_addr_t ps3_ioc0_map_page(struct device *_dev, struct page *page, iopte_flag |= CBE_IOPTE_PP_W | CBE_IOPTE_SO_RW; break; default: - /* not happned */ + /* not happened */ BUG(); } result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size, diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index f9af879c0222..73ae91200b9f 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -512,7 +512,7 @@ static int pseries_eeh_set_option(struct eeh_pe *pe, int option) int ret = 0; /* - * When we're enabling or disabling EEH functioality on + * When we're enabling or disabling EEH functionality on * the particular PE, the PE config address is possibly * unavailable. Therefore, we have to figure it out from * the FDT node. diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 4d991cf840d9..7639e7355df2 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -1430,7 +1430,7 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn) pci->table_group->tables[1] = newtbl; - /* Keep default DMA window stuct if removed */ + /* Keep default DMA window struct if removed */ if (default_win_removed) { tbl->it_size = 0; vfree(tbl->it_map); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 955ff8aa1644..36433bb1560d 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -658,7 +658,7 @@ static resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno, */ num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); if (resno >= num_res) - return 0; /* or an errror */ + return 0; /* or an error */ i = START_OF_ENTRIES + NEXT_ENTRY * resno; switch (value) { @@ -762,7 +762,7 @@ static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev) if (!pdev->is_physfn) return; - /*Firmware must support open sriov otherwise dont configure*/ + /*Firmware must support open sriov otherwise don't configure*/ indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); if (indexes) of_pci_parse_iov_addrs(pdev, indexes); diff --git a/arch/powerpc/platforms/pseries/vas-sysfs.c b/arch/powerpc/platforms/pseries/vas-sysfs.c index 909535ca513a..59aef6062847 100644 --- a/arch/powerpc/platforms/pseries/vas-sysfs.c +++ b/arch/powerpc/platforms/pseries/vas-sysfs.c @@ -67,7 +67,7 @@ struct vas_sysfs_entry { * Create sysfs interface: * /sys/devices/vas/vas0/gzip/default_capabilities * This directory contains the following VAS GZIP capabilities - * for the defaule credit type. + * for the default credit type. * /sys/devices/vas/vas0/gzip/default_capabilities/nr_total_credits * Total number of default credits assigned to the LPAR which * can be changed with DLPAR operation. diff --git a/arch/powerpc/platforms/pseries/vas.c b/arch/powerpc/platforms/pseries/vas.c index 1f59d78c77a1..245e0a42981a 100644 --- a/arch/powerpc/platforms/pseries/vas.c +++ b/arch/powerpc/platforms/pseries/vas.c @@ -807,7 +807,7 @@ int vas_reconfig_capabilties(u8 type) atomic_set(&caps->nr_total_credits, new_nr_creds); /* * The total number of available credits may be decreased or - * inceased with DLPAR operation. Means some windows have to be + * increased with DLPAR operation. Means some windows have to be * closed / reopened. Hold the vas_pseries_mutex so that the * the user space can not open new windows. */ diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 1985e067e952..18acfb4e82af 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -37,7 +37,7 @@ EXPORT_SYMBOL(fsl_lbc_ctrl_dev); * * This function converts a base address of lbc into the right format for the * BR register. If the SOC has eLBC then it returns 32bit physical address - * else it convers a 34bit local bus physical address to correct format of + * else it converts a 34bit local bus physical address to correct format of * 32bit address for BR register (Example: MPC8641). */ u32 fsl_lbc_addr(phys_addr_t addr_base) diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a97ce602394e..e5e29033929a 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -218,7 +218,7 @@ static void setup_pci_atmu(struct pci_controller *hose) * windows have implemented the default target value as 0xf * for CCSR space.In all Freescale legacy devices the target * of 0xf is reserved for local memory space. 9132 Rev1.0 - * now has local mempry space mapped to target 0x0 instead of + * now has local memory space mapped to target 0x0 instead of * 0xf. Hence adding a workaround to remove the target 0xf * defined for memory space from Inbound window attributes. */ diff --git a/arch/powerpc/sysdev/ge/ge_pic.c b/arch/powerpc/sysdev/ge/ge_pic.c index 02553a8ce191..413b375c4d28 100644 --- a/arch/powerpc/sysdev/ge/ge_pic.c +++ b/arch/powerpc/sysdev/ge/ge_pic.c @@ -150,7 +150,7 @@ static struct irq_chip gef_pic_chip = { }; -/* When an interrupt is being configured, this call allows some flexibilty +/* When an interrupt is being configured, this call allows some flexibility * in deciding which irq_chip structure is used */ static int gef_pic_host_map(struct irq_domain *h, unsigned int virq, diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 36ec0bdd8b63..a25413826b63 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -99,7 +99,7 @@ void mpic_msgr_disable(struct mpic_msgr *msgr) EXPORT_SYMBOL_GPL(mpic_msgr_disable); /* The following three functions are used to compute the order and number of - * the message register blocks. They are clearly very inefficent. However, + * the message register blocks. They are clearly very inefficient. However, * they are called *only* a few times during device initialization. */ static unsigned int mpic_msgr_number_of_blocks(void) diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c index f412d6ad0b66..9936c014ac7d 100644 --- a/arch/powerpc/sysdev/mpic_msi.c +++ b/arch/powerpc/sysdev/mpic_msi.c @@ -37,7 +37,7 @@ static int __init mpic_msi_reserve_u3_hwirqs(struct mpic *mpic) /* Reserve source numbers we know are reserved in the HW. * * This is a bit of a mix of U3 and U4 reserves but that's going - * to work fine, we have plenty enugh numbers left so let's just + * to work fine, we have plenty enough numbers left so let's just * mark anything we don't like reserved. */ for (i = 0; i < 8; i++) diff --git a/arch/powerpc/sysdev/mpic_timer.c b/arch/powerpc/sysdev/mpic_timer.c index 444e9ce42d0a..b2f0a73e8f93 100644 --- a/arch/powerpc/sysdev/mpic_timer.c +++ b/arch/powerpc/sysdev/mpic_timer.c @@ -255,7 +255,7 @@ EXPORT_SYMBOL(mpic_start_timer); /** * mpic_stop_timer - stop hardware timer - * @handle: the timer to be stoped + * @handle: the timer to be stopped * * The timer periodically generates an interrupt. Unless user stops the timer. */ diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c index 3f4841dfefb5..73d129594078 100644 --- a/arch/powerpc/sysdev/mpic_u3msi.c +++ b/arch/powerpc/sysdev/mpic_u3msi.c @@ -78,7 +78,7 @@ static u64 find_u4_magic_addr(struct pci_dev *pdev, unsigned int hwirq) /* U4 PCIe MSIs need to write to the special register in * the bridge that generates interrupts. There should be - * theorically a register at 0xf8005000 where you just write + * theoretically a register at 0xf8005000 where you just write * the MSI number and that triggers the right interrupt, but * unfortunately, this is busted in HW, the bridge endian swaps * the value and hits the wrong nibble in the register. diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c index f940428ad13f..45f72fc715fc 100644 --- a/arch/powerpc/sysdev/xive/native.c +++ b/arch/powerpc/sysdev/xive/native.c @@ -617,7 +617,7 @@ bool __init xive_native_init(void) xive_tima_os = r.start; - /* Grab size of provisionning pages */ + /* Grab size of provisioning pages */ xive_parse_provisioning(np); /* Switch the XIVE to exploitation mode */ diff --git a/arch/powerpc/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c index dfb80810b16c..0774d711453e 100644 --- a/arch/powerpc/xmon/ppc-opc.c +++ b/arch/powerpc/xmon/ppc-opc.c @@ -408,7 +408,7 @@ const struct powerpc_operand powerpc_operands[] = #define FXM4 FXM + 1 { 0xff, 12, insert_fxm, extract_fxm, PPC_OPERAND_OPTIONAL | PPC_OPERAND_OPTIONAL_VALUE}, - /* If the FXM4 operand is ommitted, use the sentinel value -1. */ + /* If the FXM4 operand is omitted, use the sentinel value -1. */ { -1, -1, NULL, NULL, 0}, /* The IMM20 field in an LI instruction. */ diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index fd72753e8ad5..27da7d5c2024 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2024,7 +2024,7 @@ static void dump_206_sprs(void) if (!cpu_has_feature(CPU_FTR_ARCH_206)) return; - /* Actually some of these pre-date 2.06, but whatevs */ + /* Actually some of these pre-date 2.06, but whatever */ printf("srr0 = %.16lx srr1 = %.16lx dsisr = %.8lx\n", mfspr(SPRN_SRR0), mfspr(SPRN_SRR1), mfspr(SPRN_DSISR)); |