summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/tqm8xx.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/tqm8xx.h')
-rw-r--r--arch/ppc/platforms/tqm8xx.h155
1 files changed, 0 insertions, 155 deletions
diff --git a/arch/ppc/platforms/tqm8xx.h b/arch/ppc/platforms/tqm8xx.h
deleted file mode 100644
index 662131d0eb39..000000000000
--- a/arch/ppc/platforms/tqm8xx.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * TQM8xx(L) board specific definitions
- *
- * Copyright (c) 1999-2002 Wolfgang Denk (wd@denx.de)
- */
-
-#ifdef __KERNEL__
-#ifndef __MACH_TQM8xx_H
-#define __MACH_TQM8xx_H
-
-
-#include <asm/ppcboot.h>
-
-#ifndef __ASSEMBLY__
-#define TQM_IMMR_BASE 0xFFF00000 /* phys. addr of IMMR */
-#define TQM_IMAP_SIZE (64 * 1024) /* size of mapped area */
-
-#define IMAP_ADDR TQM_IMMR_BASE /* physical base address of IMMR area */
-#define IMAP_SIZE TQM_IMAP_SIZE /* mapped size of IMMR area */
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define PCMCIA_MEM_SIZE ( 64 << 20 )
-
-#ifndef CONFIG_KUP4K
-# define MAX_HWIFS 1 /* overwrite default in include/asm-ppc/ide.h */
-
-#else /* CONFIG_KUP4K */
-
-# define MAX_HWIFS 2 /* overwrite default in include/asm-ppc/ide.h */
-# ifndef __ASSEMBLY__
-# include <asm/8xx_immap.h>
-static __inline__ void ide_led(int on)
-{
- volatile immap_t *immap = (immap_t *)IMAP_ADDR;
-
- if (on) {
- immap->im_ioport.iop_padat &= ~0x80;
- } else {
- immap->im_ioport.iop_padat |= 0x80;
- }
-}
-# endif /* __ASSEMBLY__ */
-# define IDE_LED(x) ide_led((x))
-#endif /* CONFIG_KUP4K */
-
-/*
- * Definitions for IDE0 Interface
- */
-#define IDE0_BASE_OFFSET 0
-#define IDE0_DATA_REG_OFFSET (PCMCIA_MEM_SIZE + 0x320)
-#define IDE0_ERROR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 1)
-#define IDE0_NSECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 2)
-#define IDE0_SECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 3)
-#define IDE0_LCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 4)
-#define IDE0_HCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 5)
-#define IDE0_SELECT_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 6)
-#define IDE0_STATUS_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 7)
-#define IDE0_CONTROL_REG_OFFSET 0x0106
-#define IDE0_IRQ_REG_OFFSET 0x000A /* not used */
-
-/* define IO_BASE for PCMCIA */
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE (64<<10)
-
-#define FEC_INTERRUPT 9 /* = SIU_LEVEL4 */
-#define PHY_INTERRUPT 12 /* = IRQ6 */
-#define IDE0_INTERRUPT 13
-
-#ifdef CONFIG_IDE
-#endif
-
-/*-----------------------------------------------------------------------
- * CPM Ethernet through SCCx.
- *-----------------------------------------------------------------------
- *
- */
-
-/*** TQM823L, TQM850L ***********************************************/
-
-#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L)
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
-#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
-#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
-#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
-
-#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
-
-#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
-#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
- * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00002600)
-#endif /* CONFIG_TQM823L, CONFIG_TQM850L */
-
-/*** TQM860L ********************************************************/
-
-#ifdef CONFIG_TQM860L
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */
-#define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */
-#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
-#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
-
-#define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */
-#define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */
-#define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
- * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x00000026)
-#endif /* CONFIG_TQM860L */
-
-/*** FPS850L *********************************************************/
-
-#ifdef CONFIG_FPS850L
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
-#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
-#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
-#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
-
-#define PC_ENET_TENA ((ushort)0x0002) /* PC 14 */
-#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
-#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00002600)
-#endif /* CONFIG_FPS850L */
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS 0
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_TQM8xx_H */
-#endif /* __KERNEL__ */