3 files changed, 65 insertions, 64 deletions

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index b203af0855b5..2aabd4cb0e3f 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1408,22 +1408,69 @@ static void lapic_setup_esr(void)
 			oldvalue, value);
 }
 
+static void apic_pending_intr_clear(void)
+{
+	long long max_loops = cpu_khz ? cpu_khz : 1000000;
+	unsigned long long tsc = 0, ntsc;
+	unsigned int queued;
+	unsigned long value;
+	int i, j, acked = 0;
+
+	if (boot_cpu_has(X86_FEATURE_TSC))
+		tsc = rdtsc();
+	/*
+	 * After a crash, we no longer service the interrupts and a pending
+	 * interrupt from previous kernel might still have ISR bit set.
+	 *
+	 * Most probably by now CPU has serviced that pending interrupt and
+	 * it might not have done the ack_APIC_irq() because it thought,
+	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
+	 * does not clear the ISR bit and cpu thinks it has already serivced
+	 * the interrupt. Hence a vector might get locked. It was noticed
+	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+	 */
+	do {
+		queued = 0;
+		for (i = APIC_ISR_NR - 1; i >= 0; i--)
+			queued |= apic_read(APIC_IRR + i*0x10);
+
+		for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+			value = apic_read(APIC_ISR + i*0x10);
+			for_each_set_bit(j, &value, 32) {
+				ack_APIC_irq();
+				acked++;
+			}
+		}
+		if (acked > 256) {
+			pr_err("LAPIC pending interrupts after %d EOI\n", acked);
+			break;
+		}
+		if (queued) {
+			if (boot_cpu_has(X86_FEATURE_TSC) && cpu_khz) {
+				ntsc = rdtsc();
+				max_loops = (cpu_khz << 10) - (ntsc - tsc);
+			} else {
+				max_loops--;
+			}
+		}
+	} while (queued && max_loops > 0);
+	WARN_ON(max_loops <= 0);
+}
+
 /**
  * setup_local_APIC - setup the local APIC
  *
  * Used to setup local APIC while initializing BSP or bringing up APs.
  * Always called with preemption disabled.
  */
-void setup_local_APIC(void)
+static void setup_local_APIC(void)
 {
 	int cpu = smp_processor_id();
-	unsigned int value, queued;
-	int i, j, acked = 0;
-	unsigned long long tsc = 0, ntsc;
-	long long max_loops = cpu_khz ? cpu_khz : 1000000;
+	unsigned int value;
+#ifdef CONFIG_X86_32
+	int logical_apicid, ldr_apicid;
+#endif
 
-	if (boot_cpu_has(X86_FEATURE_TSC))
-		tsc = rdtsc();
 
 	if (disable_apic) {
 		disable_ioapic_support();
@@ -1460,11 +1507,11 @@ void setup_local_APIC(void)
 	 * initialized during get_smp_config(), make sure it matches the
 	 * actual value.
 	 */
-	i = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
-	WARN_ON(i != BAD_APICID && i != logical_smp_processor_id());
+	logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
+	ldr_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
+	WARN_ON(logical_apicid != BAD_APICID && logical_apicid != ldr_apicid);
 	/* always use the value from LDR */
-	early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
-		logical_smp_processor_id();
+	early_per_cpu(x86_cpu_to_logical_apicid, cpu) = ldr_apicid;
 #endif
 
 	/*
@@ -1475,45 +1522,7 @@ void setup_local_APIC(void)
 	value &= ~APIC_TPRI_MASK;
 	apic_write(APIC_TASKPRI, value);
 
-	/*
-	 * After a crash, we no longer service the interrupts and a pending
-	 * interrupt from previous kernel might still have ISR bit set.
-	 *
-	 * Most probably by now CPU has serviced that pending interrupt and
-	 * it might not have done the ack_APIC_irq() because it thought,
-	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
-	 * does not clear the ISR bit and cpu thinks it has already serivced
-	 * the interrupt. Hence a vector might get locked. It was noticed
-	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
-	 */
-	do {
-		queued = 0;
-		for (i = APIC_ISR_NR - 1; i >= 0; i--)
-			queued |= apic_read(APIC_IRR + i*0x10);
-
-		for (i = APIC_ISR_NR - 1; i >= 0; i--) {
-			value = apic_read(APIC_ISR + i*0x10);
-			for (j = 31; j >= 0; j--) {
-				if (value & (1<<j)) {
-					ack_APIC_irq();
-					acked++;
-				}
-			}
-		}
-		if (acked > 256) {
-			printk(KERN_ERR "LAPIC pending interrupts after %d EOI\n",
-			       acked);
-			break;
-		}
-		if (queued) {
-			if (boot_cpu_has(X86_FEATURE_TSC) && cpu_khz) {
-				ntsc = rdtsc();
-				max_loops = (cpu_khz << 10) - (ntsc - tsc);
-			} else
-				max_loops--;
-		}
-	} while (queued && max_loops > 0);
-	WARN_ON(max_loops <= 0);
+	apic_pending_intr_clear();
 
 	/*
 	 * Now that we are all set up, enable the APIC
@@ -1570,7 +1579,7 @@ void setup_local_APIC(void)
 	 * TODO: set up through-local-APIC from through-I/O-APIC? --macro
 	 */
 	value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
-	if (!cpu && (pic_mode || !value)) {
+	if (!cpu && (pic_mode || !value || skip_ioapic_setup)) {
 		value = APIC_DM_EXTINT;
 		apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", cpu);
 	} else {
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 7c5538769f7e..7553819c74c3 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -587,7 +587,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 		       mpc_ioapic_id(apic), pin);
 }
 
-static void clear_IO_APIC (void)
+void clear_IO_APIC (void)
 {
 	int apic, pin;
 
@@ -1410,7 +1410,7 @@ void __init enable_IO_APIC(void)
 	clear_IO_APIC();
 }
 
-void native_disable_io_apic(void)
+void native_restore_boot_irq_mode(void)
 {
 	/*
 	 * If the i8259 is routed through an IOAPIC
@@ -1438,20 +1438,12 @@ void native_disable_io_apic(void)
 		disconnect_bsp_APIC(ioapic_i8259.pin != -1);
 }
 
-/*
- * Not an __init, needed by the reboot code
- */
-void disable_IO_APIC(void)
+void restore_boot_irq_mode(void)
 {
-	/*
-	 * Clear the IO-APIC before rebooting:
-	 */
-	clear_IO_APIC();
-
 	if (!nr_legacy_irqs())
 		return;
 
-	x86_io_apic_ops.disable();
+	x86_apic_ops.restore();
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index e972405eb2b5..b5cf9e7b3830 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -14,7 +14,7 @@ int x2apic_phys;
 
 static struct apic apic_x2apic_phys;
 
-static int set_x2apic_phys_mode(char *arg)
+static int __init set_x2apic_phys_mode(char *arg)
 {
 	x2apic_phys = 1;
 	return 0;