summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bluetooth')
-rw-r--r--drivers/bluetooth/Kconfig10
-rw-r--r--drivers/bluetooth/Makefile2
-rw-r--r--drivers/bluetooth/btintel.c232
-rw-r--r--drivers/bluetooth/btintel.h19
-rw-r--r--drivers/bluetooth/btusb.c408
-rw-r--r--drivers/bluetooth/hci_bcm.c19
-rw-r--r--drivers/bluetooth/hci_intel.c7
-rw-r--r--drivers/bluetooth/hci_qca.c17
-rw-r--r--drivers/bluetooth/virtio_bt.c401
9 files changed, 833 insertions, 282 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 4e73a531b377..851842372c9b 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -425,4 +425,14 @@ config BT_HCIRSI
Say Y here to compile support for HCI over Redpine into the
kernel or say M to compile as a module.
+config BT_VIRTIO
+ tristate "Virtio Bluetooth driver"
+ depends on VIRTIO
+ help
+ Virtio Bluetooth support driver.
+ This driver supports Virtio Bluetooth devices.
+
+ Say Y here to compile support for HCI over Virtio into the
+ kernel or say M to compile as a module.
+
endmenu
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 1a58a3ae142c..16286ea2655d 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -26,6 +26,8 @@ obj-$(CONFIG_BT_BCM) += btbcm.o
obj-$(CONFIG_BT_RTL) += btrtl.o
obj-$(CONFIG_BT_QCA) += btqca.o
+obj-$(CONFIG_BT_VIRTIO) += virtio_bt.o
+
obj-$(CONFIG_BT_HCIUART_NOKIA) += hci_nokia.o
obj-$(CONFIG_BT_HCIRSI) += btrsi.o
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 88ce5f0ffc4b..e44b6993cf91 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -24,6 +24,14 @@
#define ECDSA_OFFSET 644
#define ECDSA_HEADER_LEN 320
+#define CMD_WRITE_BOOT_PARAMS 0xfc0e
+struct cmd_write_boot_params {
+ u32 boot_addr;
+ u8 fw_build_num;
+ u8 fw_build_ww;
+ u8 fw_build_yy;
+} __packed;
+
int btintel_check_bdaddr(struct hci_dev *hdev)
{
struct hci_rp_read_bd_addr *bda;
@@ -208,10 +216,39 @@ void btintel_hw_error(struct hci_dev *hdev, u8 code)
}
EXPORT_SYMBOL_GPL(btintel_hw_error);
-void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
+int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
{
const char *variant;
+ /* The hardware platform number has a fixed value of 0x37 and
+ * for now only accept this single value.
+ */
+ if (ver->hw_platform != 0x37) {
+ bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
+ ver->hw_platform);
+ return -EINVAL;
+ }
+
+ /* Check for supported iBT hardware variants of this firmware
+ * loading method.
+ *
+ * This check has been put in place to ensure correct forward
+ * compatibility options when newer hardware variants come along.
+ */
+ switch (ver->hw_variant) {
+ case 0x0b: /* SfP */
+ case 0x0c: /* WsP */
+ case 0x11: /* JfP */
+ case 0x12: /* ThP */
+ case 0x13: /* HrP */
+ case 0x14: /* CcP */
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+ ver->hw_variant);
+ return -EINVAL;
+ }
+
switch (ver->fw_variant) {
case 0x06:
variant = "Bootloader";
@@ -220,13 +257,16 @@ void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
variant = "Firmware";
break;
default:
- return;
+ bt_dev_err(hdev, "Unsupported firmware variant(%02x)", ver->fw_variant);
+ return -EINVAL;
}
bt_dev_info(hdev, "%s revision %u.%u build %u week %u %u",
variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
ver->fw_build_num, ver->fw_build_ww,
2000 + ver->fw_build_yy);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(btintel_version_info);
@@ -364,13 +404,56 @@ int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
}
EXPORT_SYMBOL_GPL(btintel_read_version);
-void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
{
const char *variant;
+ /* The hardware platform number has a fixed value of 0x37 and
+ * for now only accept this single value.
+ */
+ if (INTEL_HW_PLATFORM(version->cnvi_bt) != 0x37) {
+ bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
+ INTEL_HW_PLATFORM(version->cnvi_bt));
+ return -EINVAL;
+ }
+
+ /* Check for supported iBT hardware variants of this firmware
+ * loading method.
+ *
+ * This check has been put in place to ensure correct forward
+ * compatibility options when newer hardware variants come along.
+ */
+ switch (INTEL_HW_VARIANT(version->cnvi_bt)) {
+ case 0x17: /* TyP */
+ case 0x18: /* Slr */
+ case 0x19: /* Slr-F */
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)",
+ INTEL_HW_VARIANT(version->cnvi_bt));
+ return -EINVAL;
+ }
+
switch (version->img_type) {
case 0x01:
variant = "Bootloader";
+ /* It is required that every single firmware fragment is acknowledged
+ * with a command complete event. If the boot parameters indicate
+ * that this bootloader does not send them, then abort the setup.
+ */
+ if (version->limited_cce != 0x00) {
+ bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
+ version->limited_cce);
+ return -EINVAL;
+ }
+
+ /* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
+ if (version->sbe_type > 0x01) {
+ bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
+ version->sbe_type);
+ return -EINVAL;
+ }
+
bt_dev_info(hdev, "Device revision is %u", version->dev_rev_id);
bt_dev_info(hdev, "Secure boot is %s",
version->secure_boot ? "enabled" : "disabled");
@@ -389,15 +472,14 @@ void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ve
break;
default:
bt_dev_err(hdev, "Unsupported image type(%02x)", version->img_type);
- goto done;
+ return -EINVAL;
}
bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
2000 + (version->timestamp >> 8), version->timestamp & 0xff,
version->build_type, version->build_num);
-done:
- return;
+ return 0;
}
EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
@@ -455,12 +537,23 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
version->img_type = tlv->val[0];
break;
case INTEL_TLV_TIME_STAMP:
+ /* If image type is Operational firmware (0x03), then
+ * running FW Calendar Week and Year information can
+ * be extracted from Timestamp information
+ */
+ version->min_fw_build_cw = tlv->val[0];
+ version->min_fw_build_yy = tlv->val[1];
version->timestamp = get_unaligned_le16(tlv->val);
break;
case INTEL_TLV_BUILD_TYPE:
version->build_type = tlv->val[0];
break;
case INTEL_TLV_BUILD_NUM:
+ /* If image type is Operational firmware (0x03), then
+ * running FW build number can be extracted from the
+ * Build information
+ */
+ version->min_fw_build_nn = tlv->val[0];
version->build_num = get_unaligned_le32(tlv->val);
break;
case INTEL_TLV_SECURE_BOOT:
@@ -841,7 +934,7 @@ static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
static int btintel_download_firmware_payload(struct hci_dev *hdev,
const struct firmware *fw,
- u32 *boot_param, size_t offset)
+ size_t offset)
{
int err;
const u8 *fw_ptr;
@@ -854,20 +947,6 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
while (fw_ptr - fw->data < fw->size) {
struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
- /* Each SKU has a different reset parameter to use in the
- * HCI_Intel_Reset command and it is embedded in the firmware
- * data. So, instead of using static value per SKU, check
- * the firmware data and save it for later use.
- */
- if (le16_to_cpu(cmd->opcode) == 0xfc0e) {
- /* The boot parameter is the first 32-bit value
- * and rest of 3 octets are reserved.
- */
- *boot_param = get_unaligned_le32(fw_ptr + sizeof(*cmd));
-
- bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param);
- }
-
frag_len += sizeof(*cmd) + cmd->plen;
/* The parameter length of the secure send command requires
@@ -896,28 +975,131 @@ done:
return err;
}
+static bool btintel_firmware_version(struct hci_dev *hdev,
+ u8 num, u8 ww, u8 yy,
+ const struct firmware *fw,
+ u32 *boot_addr)
+{
+ const u8 *fw_ptr;
+
+ fw_ptr = fw->data;
+
+ while (fw_ptr - fw->data < fw->size) {
+ struct hci_command_hdr *cmd = (void *)(fw_ptr);
+
+ /* Each SKU has a different reset parameter to use in the
+ * HCI_Intel_Reset command and it is embedded in the firmware
+ * data. So, instead of using static value per SKU, check
+ * the firmware data and save it for later use.
+ */
+ if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
+ struct cmd_write_boot_params *params;
+
+ params = (void *)(fw_ptr + sizeof(*cmd));
+
+ bt_dev_info(hdev, "Boot Address: 0x%x",
+ le32_to_cpu(params->boot_addr));
+
+ bt_dev_info(hdev, "Firmware Version: %u-%u.%u",
+ params->fw_build_num, params->fw_build_ww,
+ params->fw_build_yy);
+
+ return (num == params->fw_build_num &&
+ ww == params->fw_build_ww &&
+ yy == params->fw_build_yy);
+ }
+
+ fw_ptr += sizeof(*cmd) + cmd->plen;
+ }
+
+ return false;
+}
+
int btintel_download_firmware(struct hci_dev *hdev,
+ struct intel_version *ver,
const struct firmware *fw,
u32 *boot_param)
{
int err;
+ /* SfP and WsP don't seem to update the firmware version on file
+ * so version checking is currently not possible.
+ */
+ switch (ver->hw_variant) {
+ case 0x0b: /* SfP */
+ case 0x0c: /* WsP */
+ /* Skip version checking */
+ break;
+ default:
+ /* Skip reading firmware file version in bootloader mode */
+ if (ver->fw_variant == 0x06)
+ break;
+
+ /* Skip download if firmware has the same version */
+ if (btintel_firmware_version(hdev, ver->fw_build_num,
+ ver->fw_build_ww, ver->fw_build_yy,
+ fw, boot_param)) {
+ bt_dev_info(hdev, "Firmware already loaded");
+ /* Return -EALREADY to indicate that the firmware has
+ * already been loaded.
+ */
+ return -EALREADY;
+ }
+ }
+
+ /* The firmware variant determines if the device is in bootloader
+ * mode or is running operational firmware. The value 0x06 identifies
+ * the bootloader and the value 0x23 identifies the operational
+ * firmware.
+ *
+ * If the firmware version has changed that means it needs to be reset
+ * to bootloader when operational so the new firmware can be loaded.
+ */
+ if (ver->fw_variant == 0x23)
+ return -EINVAL;
+
err = btintel_sfi_rsa_header_secure_send(hdev, fw);
if (err)
return err;
- return btintel_download_firmware_payload(hdev, fw, boot_param,
- RSA_HEADER_LEN);
+ return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
}
EXPORT_SYMBOL_GPL(btintel_download_firmware);
int btintel_download_firmware_newgen(struct hci_dev *hdev,
+ struct intel_version_tlv *ver,
const struct firmware *fw, u32 *boot_param,
u8 hw_variant, u8 sbe_type)
{
int err;
u32 css_header_ver;
+ /* Skip reading firmware file version in bootloader mode */
+ if (ver->img_type != 0x01) {
+ /* Skip download if firmware has the same version */
+ if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
+ ver->min_fw_build_cw,
+ ver->min_fw_build_yy,
+ fw, boot_param)) {
+ bt_dev_info(hdev, "Firmware already loaded");
+ /* Return -EALREADY to indicate that firmware has
+ * already been loaded.
+ */
+ return -EALREADY;
+ }
+ }
+
+ /* The firmware variant determines if the device is in bootloader
+ * mode or is running operational firmware. The value 0x01 identifies
+ * the bootloader and the value 0x03 identifies the operational
+ * firmware.
+ *
+ * If the firmware version has changed that means it needs to be reset
+ * to bootloader when operational so the new firmware can be loaded.
+ */
+ if (ver->img_type == 0x03)
+ return -EINVAL;
+
/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
* only RSA secure boot engine. Hence, the corresponding sfi file will
* have RSA header of 644 bytes followed by Command Buffer.
@@ -947,7 +1129,7 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
if (err)
return err;
- err = btintel_download_firmware_payload(hdev, fw, boot_param, RSA_HEADER_LEN);
+ err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
if (err)
return err;
} else if (hw_variant >= 0x17) {
@@ -968,7 +1150,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
return err;
err = btintel_download_firmware_payload(hdev, fw,
- boot_param,
RSA_HEADER_LEN + ECDSA_HEADER_LEN);
if (err)
return err;
@@ -978,7 +1159,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
return err;
err = btintel_download_firmware_payload(hdev, fw,
- boot_param,
RSA_HEADER_LEN + ECDSA_HEADER_LEN);
if (err)
return err;
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 6511b091caf5..d184064a5e7c 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -148,8 +148,8 @@ int btintel_set_diag(struct hci_dev *hdev, bool enable);
int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable);
void btintel_hw_error(struct hci_dev *hdev, u8 code);
-void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
-void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version);
+int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
+int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version);
int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
const void *param);
int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name);
@@ -163,9 +163,10 @@ struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param);
int btintel_read_boot_params(struct hci_dev *hdev,
struct intel_boot_params *params);
-int btintel_download_firmware(struct hci_dev *dev, const struct firmware *fw,
- u32 *boot_param);
+int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver,
+ const struct firmware *fw, u32 *boot_param);
int btintel_download_firmware_newgen(struct hci_dev *hdev,
+ struct intel_version_tlv *ver,
const struct firmware *fw,
u32 *boot_param, u8 hw_variant,
u8 sbe_type);
@@ -210,14 +211,16 @@ static inline void btintel_hw_error(struct hci_dev *hdev, u8 code)
{
}
-static inline void btintel_version_info(struct hci_dev *hdev,
- struct intel_version *ver)
+static inline int btintel_version_info(struct hci_dev *hdev,
+ struct intel_version *ver)
{
+ return -EOPNOTSUPP;
}
-static inline void btintel_version_info_tlv(struct hci_dev *hdev,
- struct intel_version_tlv *version)
+static inline int btintel_version_info_tlv(struct hci_dev *hdev,
+ struct intel_version_tlv *version)
{
+ return -EOPNOTSUPP;
}
static inline int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type,
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5cbfbd948f67..5d603ef39bad 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -399,7 +399,9 @@ static const struct usb_device_id blacklist_table[] = {
/* MediaTek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01),
- .driver_info = BTUSB_MEDIATEK },
+ .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH |
+ BTUSB_VALID_LE_STATES },
/* Additional MediaTek MT7615E Bluetooth devices */
{ USB_DEVICE(0x13d3, 0x3560), .driver_info = BTUSB_MEDIATEK},
@@ -455,6 +457,8 @@ static const struct usb_device_id blacklist_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0bda, 0xc123), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0cb5, 0xc547), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Silicon Wave based devices */
{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
@@ -2400,7 +2404,7 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
return -EILSEQ;
}
-static bool btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
+static int btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
struct intel_boot_params *params,
char *fw_name, size_t len,
const char *suffix)
@@ -2424,9 +2428,10 @@ static bool btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
suffix);
break;
default:
- return false;
+ return -EINVAL;
}
- return true;
+
+ return 0;
}
static void btusb_setup_intel_newgen_get_fw_name(const struct intel_version_tlv *ver_tlv,
@@ -2444,6 +2449,44 @@ static void btusb_setup_intel_newgen_get_fw_name(const struct intel_version_tlv
suffix);
}
+static int btusb_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ ktime_t delta, rettime;
+ unsigned long long duration;
+ int err;
+
+ set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+
+ bt_dev_info(hdev, "Waiting for firmware download to complete");
+
+ err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(msec));
+ if (err == -EINTR) {
+ bt_dev_err(hdev, "Firmware loading interrupted");
+ return err;
+ }
+
+ if (err) {
+ bt_dev_err(hdev, "Firmware loading timeout");
+ return -ETIMEDOUT;
+ }
+
+ if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
+ bt_dev_err(hdev, "Firmware loading failed");
+ return -ENOEXEC;
+ }
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+ bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
+
+ return 0;
+}
+
static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
struct intel_version_tlv *ver,
u32 *boot_param)
@@ -2452,19 +2495,11 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
char fwname[64];
int err;
struct btusb_data *data = hci_get_drvdata(hdev);
+ ktime_t calltime;
if (!ver || !boot_param)
return -EINVAL;
- /* The hardware platform number has a fixed value of 0x37 and
- * for now only accept this single value.
- */
- if (INTEL_HW_PLATFORM(ver->cnvi_bt) != 0x37) {
- bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
- INTEL_HW_PLATFORM(ver->cnvi_bt));
- return -EINVAL;
- }
-
/* The firmware variant determines if the device is in bootloader
* mode or is running operational firmware. The value 0x03 identifies
* the bootloader and the value 0x23 identifies the operational
@@ -2481,50 +2516,6 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
if (ver->img_type == 0x03) {
clear_bit(BTUSB_BOOTLOADER, &data->flags);
btintel_check_bdaddr(hdev);
- return 0;
- }
-
- /* Check for supported iBT hardware variants of this firmware
- * loading method.
- *
- * This check has been put in place to ensure correct forward
- * compatibility options when newer hardware variants come along.
- */
- switch (INTEL_HW_VARIANT(ver->cnvi_bt)) {
- case 0x17: /* TyP */
- case 0x18: /* Slr */
- case 0x19: /* Slr-F */
- break;
- default:
- bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)",
- INTEL_HW_VARIANT(ver->cnvi_bt));
- return -EINVAL;
- }
-
- /* If the device is not in bootloader mode, then the only possible
- * choice is to return an error and abort the device initialization.
- */
- if (ver->img_type != 0x01) {
- bt_dev_err(hdev, "Unsupported Intel firmware variant (0x%x)",
- ver->img_type);
- return -ENODEV;
- }
-
- /* It is required that every single firmware fragment is acknowledged
- * with a command complete event. If the boot parameters indicate
- * that this bootloader does not send them, then abort the setup.
- */
- if (ver->limited_cce != 0x00) {
- bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
- ver->limited_cce);
- return -EINVAL;
- }
-
- /* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
- if (ver->sbe_type > 0x01) {
- bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
- ver->sbe_type);
- return -EINVAL;
}
/* If the OTP has no valid Bluetooth device address, then there will
@@ -2538,7 +2529,8 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
btusb_setup_intel_newgen_get_fw_name(ver, fwname, sizeof(fwname), "sfi");
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
- bt_dev_err(hdev, "Failed to load Intel firmware file (%d)", err);
+ bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
+ fwname, err);
return err;
}
@@ -2551,22 +2543,28 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
goto done;
}
+ calltime = ktime_get();
+
set_bit(BTUSB_DOWNLOADING, &data->flags);
/* Start firmware downloading and get boot parameter */
- err = btintel_download_firmware_newgen(hdev, fw, boot_param,
+ err = btintel_download_firmware_newgen(hdev, ver, fw, boot_param,
INTEL_HW_VARIANT(ver->cnvi_bt),
ver->sbe_type);
if (err < 0) {
+ if (err == -EALREADY) {
+ /* Firmware has already been loaded */
+ set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+ err = 0;
+ goto done;
+ }
+
/* When FW download fails, send Intel Reset to retry
* FW download.
*/
btintel_reset_to_bootloader(hdev);
goto done;
}
- set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
-
- bt_dev_info(hdev, "Waiting for firmware download to complete");
/* Before switching the device into operational mode and with that
* booting the loaded firmware, wait for the bootloader notification
@@ -2579,26 +2577,9 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
* and thus just timeout if that happens and fail the setup
* of this device.
*/
- err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
- TASK_INTERRUPTIBLE,
- msecs_to_jiffies(5000));
- if (err == -EINTR) {
- bt_dev_err(hdev, "Firmware loading interrupted");
- goto done;
- }
-
- if (err) {
- bt_dev_err(hdev, "Firmware loading timeout");
- err = -ETIMEDOUT;
+ err = btusb_download_wait(hdev, calltime, 5000);
+ if (err == -ETIMEDOUT)
btintel_reset_to_bootloader(hdev);
- goto done;
- }
-
- if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
- bt_dev_err(hdev, "Firmware loading failed");
- err = -ENOEXEC;
- goto done;
- }
done:
release_firmware(fw);
@@ -2614,41 +2595,11 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
char fwname[64];
int err;
struct btusb_data *data = hci_get_drvdata(hdev);
+ ktime_t calltime;
if (!ver || !params)
return -EINVAL;
- /* The hardware platform number has a fixed value of 0x37 and
- * for now only accept this single value.
- */
- if (ver->hw_platform != 0x37) {
- bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
- ver->hw_platform);
- return -EINVAL;
- }
-
- /* Check for supported iBT hardware variants of this firmware
- * loading method.
- *
- * This check has been put in place to ensure correct forward
- * compatibility options when newer hardware variants come along.
- */
- switch (ver->hw_variant) {
- case 0x0b: /* SfP */
- case 0x0c: /* WsP */
- case 0x11: /* JfP */
- case 0x12: /* ThP */
- case 0x13: /* HrP */
- case 0x14: /* CcP */
- break;
- default:
- bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
- ver->hw_variant);
- return -EINVAL;
- }
-
- btintel_version_info(hdev, ver);
-
/* The firmware variant determines if the device is in bootloader
* mode or is running operational firmware. The value 0x06 identifies
* the bootloader and the value 0x23 identifies the operational
@@ -2665,16 +2616,18 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
if (ver->fw_variant == 0x23) {
clear_bit(BTUSB_BOOTLOADER, &data->flags);
btintel_check_bdaddr(hdev);
- return 0;
- }
- /* If the device is not in bootloader mode, then the only possible
- * choice is to return an error and abort the device initialization.
- */
- if (ver->fw_variant != 0x06) {
- bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
- ver->fw_variant);
- return -ENODEV;
+ /* SfP and WsP don't seem to update the firmware version on file
+ * so version checking is currently possible.
+ */
+ switch (ver->hw_variant) {
+ case 0x0b: /* SfP */
+ case 0x0c: /* WsP */
+ return 0;
+ }
+
+ /* Proceed to download to check if the version matches */
+ goto download;
}
/* Read the secure boot parameters to identify the operating
@@ -2702,6 +2655,7 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
+download:
/* With this Intel bootloader only the hardware variant and device
* revision information are used to select the right firmware for SfP
* and WsP.
@@ -2725,14 +2679,15 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
*/
err = btusb_setup_intel_new_get_fw_name(ver, params, fwname,
sizeof(fwname), "sfi");
- if (!err) {
+ if (err < 0) {
bt_dev_err(hdev, "Unsupported Intel firmware naming");
return -EINVAL;
}
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
- bt_dev_err(hdev, "Failed to load Intel firmware file (%d)", err);
+ bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
+ fwname, err);
return err;
}
@@ -2745,20 +2700,26 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
goto done;
}
+ calltime = ktime_get();
+
set_bit(BTUSB_DOWNLOADING, &data->flags);
/* Start firmware downloading and get boot parameter */
- err = btintel_download_firmware(hdev, fw, boot_param);
+ err = btintel_download_firmware(hdev, ver, fw, boot_param);
if (err < 0) {
+ if (err == -EALREADY) {
+ /* Firmware has already been loaded */
+ set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+ err = 0;
+ goto done;
+ }
+
/* When FW download fails, send Intel Reset to retry
* FW download.
*/
btintel_reset_to_bootloader(hdev);
goto done;
}
- set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
-
- bt_dev_info(hdev, "Waiting for firmware download to complete");
/* Before switching the device into operational mode and with that
* booting the loaded firmware, wait for the bootloader notification
@@ -2771,29 +2732,74 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
* and thus just timeout if that happens and fail the setup
* of this device.
*/
- err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
+ err = btusb_download_wait(hdev, calltime, 5000);
+ if (err == -ETIMEDOUT)
+ btintel_reset_to_bootloader(hdev);
+
+done:
+ release_firmware(fw);
+ return err;
+}
+
+static int btusb_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ ktime_t delta, rettime;
+ unsigned long long duration;
+ int err;
+
+ bt_dev_info(hdev, "Waiting for device to boot");
+
+ err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
TASK_INTERRUPTIBLE,
- msecs_to_jiffies(5000));
+ msecs_to_jiffies(msec));
if (err == -EINTR) {
- bt_dev_err(hdev, "Firmware loading interrupted");
- goto done;
+ bt_dev_err(hdev, "Device boot interrupted");
+ return -EINTR;
}
if (err) {
- bt_dev_err(hdev, "Firmware loading timeout");
- err = -ETIMEDOUT;
- btintel_reset_to_bootloader(hdev);
- goto done;
+ bt_dev_err(hdev, "Device boot timeout");
+ return -ETIMEDOUT;
}
- if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
- bt_dev_err(hdev, "Firmware loading failed");
- err = -ENOEXEC;
- goto done;
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+ return 0;
+}
+
+static int btusb_intel_boot(struct hci_dev *hdev, u32 boot_addr)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ ktime_t calltime;
+ int err;
+
+ calltime = ktime_get();
+
+ set_bit(BTUSB_BOOTING, &data->flags);
+
+ err = btintel_send_intel_reset(hdev, boot_addr);
+ if (err) {
+ bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
+ btintel_reset_to_bootloader(hdev);
+ return err;
}
-done:
- release_firmware(fw);
+ /* The bootloader will not indicate when the device is ready. This
+ * is done by the operational firmware sending bootup notification.
+ *
+ * Booting into operational firmware should not take longer than
+ * 1 second. However if that happens, then just fail the setup
+ * since something went wrong.
+ */
+ err = btusb_boot_wait(hdev, calltime, 1000);
+ if (err == -ETIMEDOUT)
+ btintel_reset_to_bootloader(hdev);
+
return err;
}
@@ -2804,8 +2810,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
struct intel_boot_params params;
u32 boot_param;
char ddcname[64];
- ktime_t calltime, delta, rettime;
- unsigned long long duration;
int err;
struct intel_debug_features features;
@@ -2817,8 +2821,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
*/
boot_param = 0x00000000;
- calltime = ktime_get();
-
/* Read the Intel version information to determine if the device
* is in bootloader mode or if it already has operational firmware
* loaded.
@@ -2830,6 +2832,10 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
return err;
}
+ err = btintel_version_info(hdev, &ver);
+ if (err)
+ return err;
+
err = btusb_intel_download_firmware(hdev, &ver, &params, &boot_param);
if (err)
return err;
@@ -2838,59 +2844,16 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
if (ver.fw_variant == 0x23)
goto finish;
- rettime = ktime_get();
- delta = ktime_sub(rettime, calltime);
- duration = (unsigned long long) ktime_to_ns(delta) >> 10;
-
- bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
-
- calltime = ktime_get();
-
- set_bit(BTUSB_BOOTING, &data->flags);
-
- err = btintel_send_intel_reset(hdev, boot_param);
- if (err) {
- bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
- btintel_reset_to_bootloader(hdev);
+ err = btusb_intel_boot(hdev, boot_param);
+ if (err)
return err;
- }
-
- /* The bootloader will not indicate when the device is ready. This
- * is done by the operational firmware sending bootup notification.
- *
- * Booting into operational firmware should not take longer than
- * 1 second. However if that happens, then just fail the setup
- * since something went wrong.
- */
- bt_dev_info(hdev, "Waiting for device to boot");
-
- err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
- TASK_INTERRUPTIBLE,
- msecs_to_jiffies(1000));
-
- if (err == -EINTR) {
- bt_dev_err(hdev, "Device boot interrupted");
- return -EINTR;
- }
-
- if (err) {
- bt_dev_err(hdev, "Device boot timeout");
- btintel_reset_to_bootloader(hdev);
- return -ETIMEDOUT;
- }
-
- rettime = ktime_get();
- delta = ktime_sub(rettime, calltime);
- duration = (unsigned long long) ktime_to_ns(delta) >> 10;
-
- bt_dev_info(hdev, "Device booted in %llu usecs", duration);
clear_bit(BTUSB_BOOTLOADER, &data->flags);
err = btusb_setup_intel_new_get_fw_name(&ver, &params, ddcname,
sizeof(ddcname), "ddc");
- if (!err) {
+ if (err < 0) {
bt_dev_err(hdev, "Unsupported Intel firmware naming");
} else {
/* Once the device is running in operational mode, it needs to
@@ -2947,8 +2910,6 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
struct btusb_data *data = hci_get_drvdata(hdev);
u32 boot_param;
char ddcname[64];
- ktime_t calltime, delta, rettime;
- unsigned long long duration;
int err;
struct intel_debug_features features;
struct intel_version_tlv version;
@@ -2961,8 +2922,6 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
*/
boot_param = 0x00000000;
- calltime = ktime_get();
-
/* Read the Intel version information to determine if the device
* is in bootloader mode or if it already has operational firmware
* loaded.
@@ -2974,7 +2933,9 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
return err;
}
- btintel_version_info_tlv(hdev, &version);
+ err = btintel_version_info_tlv(hdev, &version);
+ if (err)
+ return err;
err = btusb_intel_download_firmware_newgen(hdev, &version, &boot_param);
if (err)
@@ -2984,52 +2945,9 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
if (version.img_type == 0x03)
goto finish;
- rettime = ktime_get();
- delta = ktime_sub(rettime, calltime);
- duration = (unsigned long long)ktime_to_ns(delta) >> 10;
-
- bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
-
- calltime = ktime_get();
-
- set_bit(BTUSB_BOOTING, &data->flags);
-
- err = btintel_send_intel_reset(hdev, boot_param);
- if (err) {
- bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
- btintel_reset_to_bootloader(hdev);
+ err = btusb_intel_boot(hdev, boot_param);
+ if (err)
return err;
- }
-
- /* The bootloader will not indicate when the device is ready. This
- * is done by the operational firmware sending bootup notification.
- *
- * Booting into operational firmware should not take longer than
- * 1 second. However if that happens, then just fail the setup
- * since something went wrong.
- */
- bt_dev_info(hdev, "Waiting for device to boot");
-
- err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
- TASK_INTERRUPTIBLE,
- msecs_to_jiffies(1000));
-
- if (err == -EINTR) {
- bt_dev_err(hdev, "Device boot interrupted");
- return -EINTR;
- }
-
- if (err) {
- bt_dev_err(hdev, "Device boot timeout");
- btintel_reset_to_bootloader(hdev);
- return -ETIMEDOUT;
- }
-
- rettime = ktime_get();
- delta = ktime_sub(rettime, calltime);
- duration = (unsigned long long)ktime_to_ns(delta) >> 10;
-
- bt_dev_info(hdev, "Device booted in %llu usecs", duration);
clear_bit(BTUSB_BOOTLOADER, &data->flags);
@@ -3495,7 +3413,7 @@ static int btusb_mtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwnam
fw_ptr = fw->data;
fw_bin_ptr = fw_ptr;
globaldesc = (struct btmtk_global_desc *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE);
- section_num = globaldesc->section_num;
+ section_num = le32_to_cpu(globaldesc->section_num);
for (i = 0; i < section_num; i++) {
first_block = 1;
@@ -3503,8 +3421,8 @@ static int btusb_mtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwnam
sectionmap = (struct btmtk_section_map *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE +
MTK_FW_ROM_PATCH_GD_SIZE + MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i);
- section_offset = sectionmap->secoffset;
- dl_size = sectionmap->bin_info_spec.dlsize;
+ section_offset = le32_to_cpu(sectionmap->secoffset);
+ dl_size = le32_to_cpu(sectionmap->bin_info_spec.dlsize);
if (dl_size > 0) {
retry = 20;
@@ -3740,7 +3658,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
int err, status;
u32 dev_id;
char fw_bin_name[64];
- u32 fw_version;
+ u32 fw_version = 0;
u8 param;
calltime = ktime_get();
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 3764ceb6fa0d..3cd57fc56ade 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -68,6 +68,8 @@ struct bcm_device_data {
* deassert = Bluetooth device may sleep when sleep criteria are met
* @shutdown: BT_REG_ON pin,
* power up or power down Bluetooth device internal regulators
+ * @reset: BT_RST_N pin,
+ * active low resets the Bluetooth logic core
* @set_device_wakeup: callback to toggle BT_WAKE pin
* either by accessing @device_wakeup or by calling @btlp
* @set_shutdown: callback to toggle BT_REG_ON pin
@@ -101,6 +103,7 @@ struct bcm_device {
const char *name;
struct gpio_desc *device_wakeup;
struct gpio_desc *shutdown;
+ struct gpio_desc *reset;
int (*set_device_wakeup)(struct bcm_device *, bool);
int (*set_shutdown)(struct bcm_device *, bool);
#ifdef CONFIG_ACPI
@@ -985,6 +988,15 @@ static int bcm_gpio_set_device_wakeup(struct bcm_device *dev, bool awake)
static int bcm_gpio_set_shutdown(struct bcm_device *dev, bool powered)
{
gpiod_set_value_cansleep(dev->shutdown, powered);
+ if (dev->reset)
+ /*
+ * The reset line is asserted on powerdown and deasserted
+ * on poweron so the inverse of powered is used. Notice
+ * that the GPIO line BT_RST_N needs to be specified as
+ * active low in the device tree or similar system
+ * description.
+ */
+ gpiod_set_value_cansleep(dev->reset, !powered);
return 0;
}
@@ -1050,6 +1062,11 @@ static int bcm_get_resources(struct bcm_device *dev)
if (IS_ERR(dev->shutdown))
return PTR_ERR(dev->shutdown);
+ dev->reset = devm_gpiod_get_optional(dev->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(dev->reset))
+ return PTR_ERR(dev->reset);
+
dev->set_device_wakeup = bcm_gpio_set_device_wakeup;
dev->set_shutdown = bcm_gpio_set_shutdown;
@@ -1482,6 +1499,8 @@ static struct bcm_device_data bcm43438_device_data = {
static const struct of_device_id bcm_bluetooth_of_match[] = {
{ .compatible = "brcm,bcm20702a1" },
{ .compatible = "brcm,bcm4329-bt" },
+ { .compatible = "brcm,bcm4330-bt" },
+ { .compatible = "brcm,bcm4334-bt" },
{ .compatible = "brcm,bcm4345c5" },
{ .compatible = "brcm,bcm4330-bt" },
{ .compatible = "brcm,bcm43438-bt", .data = &bcm43438_device_data },
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index b20a40fab83e..7249b91d9b91 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -735,7 +735,7 @@ static int intel_setup(struct hci_uart *hu)
set_bit(STATE_DOWNLOADING, &intel->flags);
/* Start firmware downloading and get boot parameter */
- err = btintel_download_firmware(hdev, fw, &boot_param);
+ err = btintel_download_firmware(hdev, &ver, fw, &boot_param);
if (err < 0)
goto done;
@@ -784,7 +784,10 @@ static int intel_setup(struct hci_uart *hu)
done:
release_firmware(fw);
- if (err < 0)
+ /* Check if there was an error and if is not -EALREADY which means the
+ * firmware has already been loaded.
+ */
+ if (err < 0 && err != -EALREADY)
return err;
/* We need to restore the default speed before Intel reset */
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index de36af63e182..0a0056912d51 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1066,7 +1066,7 @@ static void qca_controller_memdump(struct work_struct *work)
* packets in the buffer.
*/
/* For QCA6390, controller does not lost packets but
- * sequence number field of packat sometimes has error
+ * sequence number field of packet sometimes has error
* bits, so skip this checking for missing packet.
*/
while ((seq_no > qca_memdump->current_seq_no + 1) &&
@@ -1571,6 +1571,20 @@ static void qca_cmd_timeout(struct hci_dev *hdev)
mutex_unlock(&qca->hci_memdump_lock);
}
+static bool qca_prevent_wake(struct hci_dev *hdev)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ bool wakeup;
+
+ /* UART driver handles the interrupt from BT SoC.So we need to use
+ * device handle of UART driver to get the status of device may wakeup.
+ */
+ wakeup = device_may_wakeup(hu->serdev->ctrl->dev.parent);
+ bt_dev_dbg(hu->hdev, "wakeup status : %d", wakeup);
+
+ return !wakeup;
+}
+
static int qca_wcn3990_init(struct hci_uart *hu)
{
struct qca_serdev *qcadev;
@@ -1721,6 +1735,7 @@ retry:
qca_debugfs_init(hdev);
hu->hdev->hw_error = qca_hw_error;
hu->hdev->cmd_timeout = qca_cmd_timeout;
+ hu->hdev->prevent_wake = qca_prevent_wake;
} else if (ret == -ENOENT) {
/* No patch/nvm-config found, run with original fw/config */
set_bit(QCA_ROM_FW, &qca->flags);
diff --git a/drivers/bluetooth/virtio_bt.c b/drivers/bluetooth/virtio_bt.c
new file mode 100644
index 000000000000..c804db7e90f8
--- /dev/null
+++ b/drivers/bluetooth/virtio_bt.c
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/module.h>
+#include <linux/virtio.h>
+#include <linux/virtio_config.h>
+#include <linux/skbuff.h>
+
+#include <uapi/linux/virtio_ids.h>
+#include <uapi/linux/virtio_bt.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#define VERSION "0.1"
+
+enum {
+ VIRTBT_VQ_TX,
+ VIRTBT_VQ_RX,
+ VIRTBT_NUM_VQS,
+};
+
+struct virtio_bluetooth {
+ struct virtio_device *vdev;
+ struct virtqueue *vqs[VIRTBT_NUM_VQS];
+ struct work_struct rx;
+ struct hci_dev *hdev;
+};
+
+static int virtbt_add_inbuf(struct virtio_bluetooth *vbt)
+{
+ struct virtqueue *vq = vbt->vqs[VIRTBT_VQ_RX];
+ struct scatterlist sg[1];
+ struct sk_buff *skb;
+ int err;
+
+ skb = alloc_skb(1000, GFP_KERNEL);
+ sg_init_one(sg, skb->data, 1000);
+
+ err = virtqueue_add_inbuf(vq, sg, 1, skb, GFP_KERNEL);
+ if (err < 0) {
+ kfree_skb(skb);
+ return err;
+ }
+
+ return 0;
+}
+
+static int virtbt_open(struct hci_dev *hdev)
+{
+ struct virtio_bluetooth *vbt = hci_get_drvdata(hdev);
+
+ if (virtbt_add_inbuf(vbt) < 0)
+ return -EIO;
+
+ virtqueue_kick(vbt->vqs[VIRTBT_VQ_RX]);
+ return 0;
+}
+
+static int virtbt_close(struct hci_dev *hdev)
+{
+ struct virtio_bluetooth *vbt = hci_get_drvdata(hdev);
+ int i;
+
+ cancel_work_sync(&vbt->rx);
+
+ for (i = 0; i < ARRAY_SIZE(vbt->vqs); i++) {
+ struct virtqueue *vq = vbt->vqs[i];
+ struct sk_buff *skb;
+
+ while ((skb = virtqueue_detach_unused_buf(vq)))
+ kfree_skb(skb);
+ }
+
+ return 0;
+}
+
+static int virtbt_flush(struct hci_dev *hdev)
+{
+ return 0;
+}
+
+static int virtbt_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct virtio_bluetooth *vbt = hci_get_drvdata(hdev);
+ struct scatterlist sg[1];
+ int err;
+
+ memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+ sg_init_one(sg, skb->data, skb->len);
+ err = virtqueue_add_outbuf(vbt->vqs[VIRTBT_VQ_TX], sg, 1, skb,
+ GFP_KERNEL);
+ if (err) {
+ kfree_skb(skb);
+ return err;
+ }
+
+ virtqueue_kick(vbt->vqs[VIRTBT_VQ_TX]);
+ return 0;
+}
+
+static int virtbt_setup_zephyr(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+
+ /* Read Build Information */
+ skb = __hci_cmd_sync(hdev, 0xfc08, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
+
+ hci_set_fw_info(hdev, "%s", skb->data + 1);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static int virtbt_set_bdaddr_zephyr(struct hci_dev *hdev,
+ const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+
+ /* Write BD_ADDR */
+ skb = __hci_cmd_sync(hdev, 0xfc06, 6, bdaddr, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static int virtbt_setup_intel(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+
+ /* Intel Read Version */
+ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static int virtbt_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+
+ /* Intel Write BD Address */
+ skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static int virtbt_setup_realtek(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+
+ /* Read ROM Version */
+ skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ bt_dev_info(hdev, "ROM version %u", *((__u8 *) (skb->data + 1)));
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static int virtbt_shutdown_generic(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+
+ /* Reset */
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static void virtbt_rx_handle(struct virtio_bluetooth *vbt, struct sk_buff *skb)
+{
+ __u8 pkt_type;
+
+ pkt_type = *((__u8 *) skb->data);
+ skb_pull(skb, 1);
+
+ switch (pkt_type) {
+ case HCI_EVENT_PKT:
+ case HCI_ACLDATA_PKT:
+ case HCI_SCODATA_PKT:
+ case HCI_ISODATA_PKT:
+ hci_skb_pkt_type(skb) = pkt_type;
+ hci_recv_frame(vbt->hdev, skb);
+ break;
+ }
+}
+
+static void virtbt_rx_work(struct work_struct *work)
+{
+ struct virtio_bluetooth *vbt = container_of(work,
+ struct virtio_bluetooth, rx);
+ struct sk_buff *skb;
+ unsigned int len;
+
+ skb = virtqueue_get_buf(vbt->vqs[VIRTBT_VQ_RX], &len);
+ if (!skb)
+ return;
+
+ skb->len = len;
+ virtbt_rx_handle(vbt, skb);
+
+ if (virtbt_add_inbuf(vbt) < 0)
+ return;
+
+ virtqueue_kick(vbt->vqs[VIRTBT_VQ_RX]);
+}
+
+static void virtbt_tx_done(struct virtqueue *vq)
+{
+ struct sk_buff *skb;
+ unsigned int len;
+
+ while ((skb = virtqueue_get_buf(vq, &len)))
+ kfree_skb(skb);
+}
+
+static void virtbt_rx_done(struct virtqueue *vq)
+{
+ struct virtio_bluetooth *vbt = vq->vdev->priv;
+
+ schedule_work(&vbt->rx);
+}
+
+static int virtbt_probe(struct virtio_device *vdev)
+{
+ vq_callback_t *callbacks[VIRTBT_NUM_VQS] = {
+ [VIRTBT_VQ_TX] = virtbt_tx_done,
+ [VIRTBT_VQ_RX] = virtbt_rx_done,
+ };
+ const char *names[VIRTBT_NUM_VQS] = {
+ [VIRTBT_VQ_TX] = "tx",
+ [VIRTBT_VQ_RX] = "rx",
+ };
+ struct virtio_bluetooth *vbt;
+ struct hci_dev *hdev;
+ int err;
+ __u8 type;
+
+ if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1))
+ return -ENODEV;
+
+ type = virtio_cread8(vdev, offsetof(struct virtio_bt_config, type));
+
+ switch (type) {
+ case VIRTIO_BT_CONFIG_TYPE_PRIMARY:
+ case VIRTIO_BT_CONFIG_TYPE_AMP:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ vbt = kzalloc(sizeof(*vbt), GFP_KERNEL);
+ if (!vbt)
+ return -ENOMEM;
+
+ vdev->priv = vbt;
+ vbt->vdev = vdev;
+
+ INIT_WORK(&vbt->rx, virtbt_rx_work);
+
+ err = virtio_find_vqs(vdev, VIRTBT_NUM_VQS, vbt->vqs, callbacks,
+ names, NULL);
+ if (err)
+ return err;
+
+ hdev = hci_alloc_dev();
+ if (!hdev) {
+ err = -ENOMEM;
+ goto failed;
+ }
+
+ vbt->hdev = hdev;
+
+ hdev->bus = HCI_VIRTIO;
+ hdev->dev_type = type;
+ hci_set_drvdata(hdev, vbt);
+
+ hdev->open = virtbt_open;
+ hdev->close = virtbt_close;
+ hdev->flush = virtbt_flush;
+ hdev->send = virtbt_send_frame;
+
+ if (virtio_has_feature(vdev, VIRTIO_BT_F_VND_HCI)) {
+ __u16 vendor;
+
+ virtio_cread(vdev, struct virtio_bt_config, vendor, &vendor);
+
+ switch (vendor) {
+ case VIRTIO_BT_CONFIG_VENDOR_ZEPHYR:
+ hdev->manufacturer = 1521;
+ hdev->setup = virtbt_setup_zephyr;
+ hdev->shutdown = virtbt_shutdown_generic;
+ hdev->set_bdaddr = virtbt_set_bdaddr_zephyr;
+ break;
+
+ case VIRTIO_BT_CONFIG_VENDOR_INTEL:
+ hdev->manufacturer = 2;
+ hdev->setup = virtbt_setup_intel;
+ hdev->shutdown = virtbt_shutdown_generic;
+ hdev->set_bdaddr = virtbt_set_bdaddr_intel;
+ set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+ set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+ set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+ break;
+
+ case VIRTIO_BT_CONFIG_VENDOR_REALTEK:
+ hdev->manufacturer = 93;
+ hdev->setup = virtbt_setup_realtek;
+ hdev->shutdown = virtbt_shutdown_generic;
+ set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+ set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+ break;
+ }
+ }
+
+ if (virtio_has_feature(vdev, VIRTIO_BT_F_MSFT_EXT)) {
+ __u16 msft_opcode;
+
+ virtio_cread(vdev, struct virtio_bt_config,
+ msft_opcode, &msft_opcode);
+
+ hci_set_msft_opcode(hdev, msft_opcode);
+ }
+
+ if (virtio_has_feature(vdev, VIRTIO_BT_F_AOSP_EXT))
+ hci_set_aosp_capable(hdev);
+
+ if (hci_register_dev(hdev) < 0) {
+ hci_free_dev(hdev);
+ err = -EBUSY;
+ goto failed;
+ }
+
+ return 0;
+
+failed:
+ vdev->config->del_vqs(vdev);
+ return err;
+}
+
+static void virtbt_remove(struct virtio_device *vdev)
+{
+ struct virtio_bluetooth *vbt = vdev->priv;
+ struct hci_dev *hdev = vbt->hdev;
+
+ hci_unregister_dev(hdev);
+ vdev->config->reset(vdev);
+
+ hci_free_dev(hdev);
+ vbt->hdev = NULL;
+
+ vdev->config->del_vqs(vdev);
+ kfree(vbt);
+}
+
+static struct virtio_device_id virtbt_table[] = {
+ { VIRTIO_ID_BT, VIRTIO_DEV_ANY_ID },
+ { 0 },
+};
+
+MODULE_DEVICE_TABLE(virtio, virtbt_table);
+
+static const unsigned int virtbt_features[] = {
+ VIRTIO_BT_F_VND_HCI,
+ VIRTIO_BT_F_MSFT_EXT,
+ VIRTIO_BT_F_AOSP_EXT,
+};
+
+static struct virtio_driver virtbt_driver = {
+ .driver.name = KBUILD_MODNAME,
+ .driver.owner = THIS_MODULE,
+ .feature_table = virtbt_features,
+ .feature_table_size = ARRAY_SIZE(virtbt_features),
+ .id_table = virtbt_table,
+ .probe = virtbt_probe,
+ .remove = virtbt_remove,
+};
+
+module_virtio_driver(virtbt_driver);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Generic Bluetooth VIRTIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");