summaryrefslogtreecommitdiffstats
path: root/drivers/dma/amba-pl08x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/dma/amba-pl08x.c')
-rw-r--r--drivers/dma/amba-pl08x.c970
1 files changed, 755 insertions, 215 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 6bb8813ca275..13cc95c0474c 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -1,9 +1,10 @@
/*
* Copyright (c) 2006 ARM Ltd.
* Copyright (c) 2010 ST-Ericsson SA
+ * Copyirght (c) 2017 Linaro Ltd.
*
* Author: Peter Pearse <peter.pearse@arm.com>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -110,11 +111,12 @@ struct pl08x_driver_data;
* @channels: the number of channels available in this variant
* @signals: the number of request signals available from the hardware
* @dualmaster: whether this version supports dual AHB masters or not.
- * @nomadik: whether the channels have Nomadik security extension bits
- * that need to be checked for permission before use and some registers are
- * missing
- * @pl080s: whether this version is a PL080S, which has separate register and
- * LLI word for transfer size.
+ * @nomadik: whether this variant is a ST Microelectronics Nomadik, where the
+ * channels have Nomadik security extension bits that need to be checked
+ * for permission before use and some registers are missing
+ * @pl080s: whether this variant is a Samsung PL080S, which has separate
+ * register and LLI word for transfer size.
+ * @ftdmac020: whether this variant is a Faraday Technology FTDMAC020
* @max_transfer_size: the maximum single element transfer size for this
* PL08x variant.
*/
@@ -125,6 +127,7 @@ struct vendor_data {
bool dualmaster;
bool nomadik;
bool pl080s;
+ bool ftdmac020;
u32 max_transfer_size;
};
@@ -148,19 +151,34 @@ struct pl08x_bus_data {
* @id: physical index to this channel
* @base: memory base address for this physical channel
* @reg_config: configuration address for this physical channel
+ * @reg_control: control address for this physical channel
+ * @reg_src: transfer source address register
+ * @reg_dst: transfer destination address register
+ * @reg_lli: transfer LLI address register
+ * @reg_busy: if the variant has a special per-channel busy register,
+ * this contains a pointer to it
* @lock: a lock to use when altering an instance of this struct
* @serving: the virtual channel currently being served by this physical
* channel
* @locked: channel unavailable for the system, e.g. dedicated to secure
* world
+ * @ftdmac020: channel is on a FTDMAC020
+ * @pl080s: channel is on a PL08s
*/
struct pl08x_phy_chan {
unsigned int id;
void __iomem *base;
void __iomem *reg_config;
+ void __iomem *reg_control;
+ void __iomem *reg_src;
+ void __iomem *reg_dst;
+ void __iomem *reg_lli;
+ void __iomem *reg_busy;
spinlock_t lock;
struct pl08x_dma_chan *serving;
bool locked;
+ bool ftdmac020;
+ bool pl080s;
};
/**
@@ -253,8 +271,9 @@ struct pl08x_dma_chan {
/**
* struct pl08x_driver_data - the local state holder for the PL08x
- * @slave: slave engine for this instance
+ * @slave: optional slave engine for this instance
* @memcpy: memcpy engine for this instance
+ * @has_slave: the PL08x has a slave engine (routed signals)
* @base: virtual memory base (remapped) for the PL08x
* @adev: the corresponding AMBA (PrimeCell) bus entry
* @vd: vendor data for this PL08x variant
@@ -269,6 +288,7 @@ struct pl08x_dma_chan {
struct pl08x_driver_data {
struct dma_device slave;
struct dma_device memcpy;
+ bool has_slave;
void __iomem *base;
struct amba_device *adev;
const struct vendor_data *vd;
@@ -360,10 +380,24 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch)
{
unsigned int val;
+ /* If we have a special busy register, take a shortcut */
+ if (ch->reg_busy) {
+ val = readl(ch->reg_busy);
+ return !!(val & BIT(ch->id));
+ }
val = readl(ch->reg_config);
return val & PL080_CONFIG_ACTIVE;
}
+/*
+ * pl08x_write_lli() - Write an LLI into the DMA controller.
+ *
+ * The PL08x derivatives support linked lists, but the first item of the
+ * list containing the source, destination, control word and next LLI is
+ * ignored. Instead the driver has to write those values directly into the
+ * SRC, DST, LLI and control registers. On FTDMAC020 also the SIZE
+ * register need to be set up for the first transfer.
+ */
static void pl08x_write_lli(struct pl08x_driver_data *pl08x,
struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg)
{
@@ -381,11 +415,112 @@ static void pl08x_write_lli(struct pl08x_driver_data *pl08x,
phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg);
- writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR);
- writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR);
- writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI);
- writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL);
+ writel_relaxed(lli[PL080_LLI_SRC], phychan->reg_src);
+ writel_relaxed(lli[PL080_LLI_DST], phychan->reg_dst);
+ writel_relaxed(lli[PL080_LLI_LLI], phychan->reg_lli);
+
+ /*
+ * The FTMAC020 has a different layout in the CCTL word of the LLI
+ * and the CCTL register which is split in CSR and SIZE registers.
+ * Convert the LLI item CCTL into the proper values to write into
+ * the CSR and SIZE registers.
+ */
+ if (phychan->ftdmac020) {
+ u32 llictl = lli[PL080_LLI_CCTL];
+ u32 val = 0;
+
+ /* Write the transfer size (12 bits) to the size register */
+ writel_relaxed(llictl & FTDMAC020_LLI_TRANSFER_SIZE_MASK,
+ phychan->base + FTDMAC020_CH_SIZE);
+ /*
+ * Then write the control bits 28..16 to the control register
+ * by shuffleing the bits around to where they are in the
+ * main register. The mapping is as follows:
+ * Bit 28: TC_MSK - mask on all except last LLI
+ * Bit 27..25: SRC_WIDTH
+ * Bit 24..22: DST_WIDTH
+ * Bit 21..20: SRCAD_CTRL
+ * Bit 19..17: DSTAD_CTRL
+ * Bit 17: SRC_SEL
+ * Bit 16: DST_SEL
+ */
+ if (llictl & FTDMAC020_LLI_TC_MSK)
+ val |= FTDMAC020_CH_CSR_TC_MSK;
+ val |= ((llictl & FTDMAC020_LLI_SRC_WIDTH_MSK) >>
+ (FTDMAC020_LLI_SRC_WIDTH_SHIFT -
+ FTDMAC020_CH_CSR_SRC_WIDTH_SHIFT));
+ val |= ((llictl & FTDMAC020_LLI_DST_WIDTH_MSK) >>
+ (FTDMAC020_LLI_DST_WIDTH_SHIFT -
+ FTDMAC020_CH_CSR_DST_WIDTH_SHIFT));
+ val |= ((llictl & FTDMAC020_LLI_SRCAD_CTL_MSK) >>
+ (FTDMAC020_LLI_SRCAD_CTL_SHIFT -
+ FTDMAC020_CH_CSR_SRCAD_CTL_SHIFT));
+ val |= ((llictl & FTDMAC020_LLI_DSTAD_CTL_MSK) >>
+ (FTDMAC020_LLI_DSTAD_CTL_SHIFT -
+ FTDMAC020_CH_CSR_DSTAD_CTL_SHIFT));
+ if (llictl & FTDMAC020_LLI_SRC_SEL)
+ val |= FTDMAC020_CH_CSR_SRC_SEL;
+ if (llictl & FTDMAC020_LLI_DST_SEL)
+ val |= FTDMAC020_CH_CSR_DST_SEL;
+
+ /*
+ * Set up the bits that exist in the CSR but are not
+ * part the LLI, i.e. only gets written to the control
+ * register right here.
+ *
+ * FIXME: do not just handle memcpy, also handle slave DMA.
+ */
+ switch (pl08x->pd->memcpy_burst_size) {
+ default:
+ case PL08X_BURST_SZ_1:
+ val |= PL080_BSIZE_1 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_4:
+ val |= PL080_BSIZE_4 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_8:
+ val |= PL080_BSIZE_8 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_16:
+ val |= PL080_BSIZE_16 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_32:
+ val |= PL080_BSIZE_32 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_64:
+ val |= PL080_BSIZE_64 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_128:
+ val |= PL080_BSIZE_128 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_256:
+ val |= PL080_BSIZE_256 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ }
+
+ /* Protection flags */
+ if (pl08x->pd->memcpy_prot_buff)
+ val |= FTDMAC020_CH_CSR_PROT2;
+ if (pl08x->pd->memcpy_prot_cache)
+ val |= FTDMAC020_CH_CSR_PROT3;
+ /* We are the kernel, so we are in privileged mode */
+ val |= FTDMAC020_CH_CSR_PROT1;
+
+ writel_relaxed(val, phychan->reg_control);
+ } else {
+ /* Bits are just identical */
+ writel_relaxed(lli[PL080_LLI_CCTL], phychan->reg_control);
+ }
+ /* Second control word on the PL080s */
if (pl08x->vd->pl080s)
writel_relaxed(lli[PL080S_LLI_CCTL2],
phychan->base + PL080S_CH_CONTROL2);
@@ -423,11 +558,25 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
cpu_relax();
/* Do not access config register until channel shows as inactive */
- val = readl(phychan->reg_config);
- while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
+ if (phychan->ftdmac020) {
+ val = readl(phychan->reg_config);
+ while (val & FTDMAC020_CH_CFG_BUSY)
+ val = readl(phychan->reg_config);
+
+ val = readl(phychan->reg_control);
+ while (val & FTDMAC020_CH_CSR_EN)
+ val = readl(phychan->reg_control);
+
+ writel(val | FTDMAC020_CH_CSR_EN,
+ phychan->reg_control);
+ } else {
val = readl(phychan->reg_config);
+ while ((val & PL080_CONFIG_ACTIVE) ||
+ (val & PL080_CONFIG_ENABLE))
+ val = readl(phychan->reg_config);
- writel(val | PL080_CONFIG_ENABLE, phychan->reg_config);
+ writel(val | PL080_CONFIG_ENABLE, phychan->reg_config);
+ }
}
/*
@@ -445,6 +594,14 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
u32 val;
int timeout;
+ if (ch->ftdmac020) {
+ /* Use the enable bit on the FTDMAC020 */
+ val = readl(ch->reg_control);
+ val &= ~FTDMAC020_CH_CSR_EN;
+ writel(val, ch->reg_control);
+ return;
+ }
+
/* Set the HALT bit and wait for the FIFO to drain */
val = readl(ch->reg_config);
val |= PL080_CONFIG_HALT;
@@ -464,6 +621,14 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
{
u32 val;
+ /* Use the enable bit on the FTDMAC020 */
+ if (ch->ftdmac020) {
+ val = readl(ch->reg_control);
+ val |= FTDMAC020_CH_CSR_EN;
+ writel(val, ch->reg_control);
+ return;
+ }
+
/* Clear the HALT bit */
val = readl(ch->reg_config);
val &= ~PL080_CONFIG_HALT;
@@ -479,25 +644,68 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
struct pl08x_phy_chan *ch)
{
- u32 val = readl(ch->reg_config);
+ u32 val;
+ /* The layout for the FTDMAC020 is different */
+ if (ch->ftdmac020) {
+ /* Disable all interrupts */
+ val = readl(ch->reg_config);
+ val |= (FTDMAC020_CH_CFG_INT_ABT_MASK |
+ FTDMAC020_CH_CFG_INT_ERR_MASK |
+ FTDMAC020_CH_CFG_INT_TC_MASK);
+ writel(val, ch->reg_config);
+
+ /* Abort and disable channel */
+ val = readl(ch->reg_control);
+ val &= ~FTDMAC020_CH_CSR_EN;
+ val |= FTDMAC020_CH_CSR_ABT;
+ writel(val, ch->reg_control);
+
+ /* Clear ABT and ERR interrupt flags */
+ writel(BIT(ch->id) | BIT(ch->id + 16),
+ pl08x->base + PL080_ERR_CLEAR);
+ writel(BIT(ch->id), pl08x->base + PL080_TC_CLEAR);
+
+ return;
+ }
+
+ val = readl(ch->reg_config);
val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK |
PL080_CONFIG_TC_IRQ_MASK);
-
writel(val, ch->reg_config);
writel(BIT(ch->id), pl08x->base + PL080_ERR_CLEAR);
writel(BIT(ch->id), pl08x->base + PL080_TC_CLEAR);
}
-static inline u32 get_bytes_in_cctl(u32 cctl)
+static u32 get_bytes_in_phy_channel(struct pl08x_phy_chan *ch)
{
- /* The source width defines the number of bytes */
- u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK;
+ u32 val;
+ u32 bytes;
+
+ if (ch->ftdmac020) {
+ bytes = readl(ch->base + FTDMAC020_CH_SIZE);
- cctl &= PL080_CONTROL_SWIDTH_MASK;
+ val = readl(ch->reg_control);
+ val &= FTDMAC020_CH_CSR_SRC_WIDTH_MSK;
+ val >>= FTDMAC020_CH_CSR_SRC_WIDTH_SHIFT;
+ } else if (ch->pl080s) {
+ val = readl(ch->base + PL080S_CH_CONTROL2);
+ bytes = val & PL080S_CONTROL_TRANSFER_SIZE_MASK;
- switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
+ val = readl(ch->reg_control);
+ val &= PL080_CONTROL_SWIDTH_MASK;
+ val >>= PL080_CONTROL_SWIDTH_SHIFT;
+ } else {
+ /* Plain PL08x */
+ val = readl(ch->reg_control);
+ bytes = val & PL080_CONTROL_TRANSFER_SIZE_MASK;
+
+ val &= PL080_CONTROL_SWIDTH_MASK;
+ val >>= PL080_CONTROL_SWIDTH_SHIFT;
+ }
+
+ switch (val) {
case PL080_WIDTH_8BIT:
break;
case PL080_WIDTH_16BIT:
@@ -510,14 +718,35 @@ static inline u32 get_bytes_in_cctl(u32 cctl)
return bytes;
}
-static inline u32 get_bytes_in_cctl_pl080s(u32 cctl, u32 cctl1)
+static u32 get_bytes_in_lli(struct pl08x_phy_chan *ch, const u32 *llis_va)
{
- /* The source width defines the number of bytes */
- u32 bytes = cctl1 & PL080S_CONTROL_TRANSFER_SIZE_MASK;
+ u32 val;
+ u32 bytes;
+
+ if (ch->ftdmac020) {
+ val = llis_va[PL080_LLI_CCTL];
+ bytes = val & FTDMAC020_LLI_TRANSFER_SIZE_MASK;
+
+ val = llis_va[PL080_LLI_CCTL];
+ val &= FTDMAC020_LLI_SRC_WIDTH_MSK;
+ val >>= FTDMAC020_LLI_SRC_WIDTH_SHIFT;
+ } else if (ch->pl080s) {
+ val = llis_va[PL080S_LLI_CCTL2];
+ bytes = val & PL080S_CONTROL_TRANSFER_SIZE_MASK;
+
+ val = llis_va[PL080_LLI_CCTL];
+ val &= PL080_CONTROL_SWIDTH_MASK;
+ val >>= PL080_CONTROL_SWIDTH_SHIFT;
+ } else {
+ /* Plain PL08x */
+ val = llis_va[PL080_LLI_CCTL];
+ bytes = val & PL080_CONTROL_TRANSFER_SIZE_MASK;
- cctl &= PL080_CONTROL_SWIDTH_MASK;
+ val &= PL080_CONTROL_SWIDTH_MASK;
+ val >>= PL080_CONTROL_SWIDTH_SHIFT;
+ }
- switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
+ switch (val) {
case PL080_WIDTH_8BIT:
break;
case PL080_WIDTH_16BIT:
@@ -552,15 +781,10 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
* Follow the LLIs to get the number of remaining
* bytes in the currently active transaction.
*/
- clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
+ clli = readl(ch->reg_lli) & ~PL080_LLI_LM_AHB2;
/* First get the remaining bytes in the active transfer */
- if (pl08x->vd->pl080s)
- bytes = get_bytes_in_cctl_pl080s(
- readl(ch->base + PL080_CH_CONTROL),
- readl(ch->base + PL080S_CH_CONTROL2));
- else
- bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
+ bytes = get_bytes_in_phy_channel(ch);
if (!clli)
return bytes;
@@ -581,12 +805,7 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
llis_va_limit = llis_va + llis_max_words;
for (; llis_va < llis_va_limit; llis_va += pl08x->lli_words) {
- if (pl08x->vd->pl080s)
- bytes += get_bytes_in_cctl_pl080s(
- llis_va[PL080_LLI_CCTL],
- llis_va[PL080S_LLI_CCTL2]);
- else
- bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]);
+ bytes += get_bytes_in_lli(ch, llis_va);
/*
* A LLI pointer going backward terminates the LLI list
@@ -705,7 +924,7 @@ static void pl08x_phy_free(struct pl08x_dma_chan *plchan)
break;
}
- if (!next) {
+ if (!next && pl08x->has_slave) {
list_for_each_entry(p, &pl08x->slave.channels, vc.chan.device_node)
if (p->state == PL08X_CHAN_WAITING) {
next = p;
@@ -746,9 +965,30 @@ static void pl08x_phy_free(struct pl08x_dma_chan *plchan)
* LLI handling
*/
-static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded)
+static inline unsigned int
+pl08x_get_bytes_for_lli(struct pl08x_driver_data *pl08x,
+ u32 cctl,
+ bool source)
{
- switch (coded) {
+ u32 val;
+
+ if (pl08x->vd->ftdmac020) {
+ if (source)
+ val = (cctl & FTDMAC020_LLI_SRC_WIDTH_MSK) >>
+ FTDMAC020_LLI_SRC_WIDTH_SHIFT;
+ else
+ val = (cctl & FTDMAC020_LLI_DST_WIDTH_MSK) >>
+ FTDMAC020_LLI_DST_WIDTH_SHIFT;
+ } else {
+ if (source)
+ val = (cctl & PL080_CONTROL_SWIDTH_MASK) >>
+ PL080_CONTROL_SWIDTH_SHIFT;
+ else
+ val = (cctl & PL080_CONTROL_DWIDTH_MASK) >>
+ PL080_CONTROL_DWIDTH_SHIFT;
+ }
+
+ switch (val) {
case PL080_WIDTH_8BIT:
return 1;
case PL080_WIDTH_16BIT:
@@ -762,49 +1002,106 @@ static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded)
return 0;
}
-static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
- size_t tsize)
+static inline u32 pl08x_lli_control_bits(struct pl08x_driver_data *pl08x,
+ u32 cctl,
+ u8 srcwidth, u8 dstwidth,
+ size_t tsize)
{
u32 retbits = cctl;
- /* Remove all src, dst and transfer size bits */
- retbits &= ~PL080_CONTROL_DWIDTH_MASK;
- retbits &= ~PL080_CONTROL_SWIDTH_MASK;
- retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK;
+ /*
+ * Remove all src, dst and transfer size bits, then set the
+ * width and size according to the parameters. The bit offsets
+ * are different in the FTDMAC020 so we need to accound for this.
+ */
+ if (pl08x->vd->ftdmac020) {
+ retbits &= ~FTDMAC020_LLI_DST_WIDTH_MSK;
+ retbits &= ~FTDMAC020_LLI_SRC_WIDTH_MSK;
+ retbits &= ~FTDMAC020_LLI_TRANSFER_SIZE_MASK;
+
+ switch (srcwidth) {
+ case 1:
+ retbits |= PL080_WIDTH_8BIT <<
+ FTDMAC020_LLI_SRC_WIDTH_SHIFT;
+ break;
+ case 2:
+ retbits |= PL080_WIDTH_16BIT <<
+ FTDMAC020_LLI_SRC_WIDTH_SHIFT;
+ break;
+ case 4:
+ retbits |= PL080_WIDTH_32BIT <<
+ FTDMAC020_LLI_SRC_WIDTH_SHIFT;
+ break;
+ default:
+ BUG();
+ break;
+ }
- /* Then set the bits according to the parameters */
- switch (srcwidth) {
- case 1:
- retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT;
- break;
- case 2:
- retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT;
- break;
- case 4:
- retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT;
- break;
- default:
- BUG();
- break;
- }
+ switch (dstwidth) {
+ case 1:
+ retbits |= PL080_WIDTH_8BIT <<
+ FTDMAC020_LLI_DST_WIDTH_SHIFT;
+ break;
+ case 2:
+ retbits |= PL080_WIDTH_16BIT <<
+ FTDMAC020_LLI_DST_WIDTH_SHIFT;
+ break;
+ case 4:
+ retbits |= PL080_WIDTH_32BIT <<
+ FTDMAC020_LLI_DST_WIDTH_SHIFT;
+ break;
+ default:
+ BUG();
+ break;
+ }
- switch (dstwidth) {
- case 1:
- retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT;
- break;
- case 2:
- retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT;
- break;
- case 4:
- retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT;
- break;
- default:
- BUG();
- break;
+ tsize &= FTDMAC020_LLI_TRANSFER_SIZE_MASK;
+ retbits |= tsize << FTDMAC020_LLI_TRANSFER_SIZE_SHIFT;
+ } else {
+ retbits &= ~PL080_CONTROL_DWIDTH_MASK;
+ retbits &= ~PL080_CONTROL_SWIDTH_MASK;
+ retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK;
+
+ switch (srcwidth) {
+ case 1:
+ retbits |= PL080_WIDTH_8BIT <<
+ PL080_CONTROL_SWIDTH_SHIFT;
+ break;
+ case 2:
+ retbits |= PL080_WIDTH_16BIT <<
+ PL080_CONTROL_SWIDTH_SHIFT;
+ break;
+ case 4:
+ retbits |= PL080_WIDTH_32BIT <<
+ PL080_CONTROL_SWIDTH_SHIFT;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ switch (dstwidth) {
+ case 1:
+ retbits |= PL080_WIDTH_8BIT <<
+ PL080_CONTROL_DWIDTH_SHIFT;
+ break;
+ case 2:
+ retbits |= PL080_WIDTH_16BIT <<
+ PL080_CONTROL_DWIDTH_SHIFT;
+ break;
+ case 4:
+ retbits |= PL080_WIDTH_32BIT <<
+ PL080_CONTROL_DWIDTH_SHIFT;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ tsize &= PL080_CONTROL_TRANSFER_SIZE_MASK;
+ retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT;
}
- tsize &= PL080_CONTROL_TRANSFER_SIZE_MASK;
- retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT;
return retbits;
}
@@ -825,13 +1122,35 @@ struct pl08x_lli_build_data {
* - prefers the destination bus if both available
* - prefers bus with fixed address (i.e. peripheral)
*/
-static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
- struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
+static void pl08x_choose_master_bus(struct pl08x_driver_data *pl08x,
+ struct pl08x_lli_build_data *bd,
+ struct pl08x_bus_data **mbus,
+ struct pl08x_bus_data **sbus,
+ u32 cctl)
{
- if (!(cctl & PL080_CONTROL_DST_INCR)) {
+ bool dst_incr;
+ bool src_incr;
+
+ /*
+ * The FTDMAC020 only supports memory-to-memory transfer, so
+ * source and destination always increase.
+ */
+ if (pl08x->vd->ftdmac020) {
+ dst_incr = true;
+ src_incr = true;
+ } else {
+ dst_incr = !!(cctl & PL080_CONTROL_DST_INCR);
+ src_incr = !!(cctl & PL080_CONTROL_SRC_INCR);
+ }
+
+ /*
+ * If either bus is not advancing, i.e. it is a peripheral, that
+ * one becomes master
+ */
+ if (!dst_incr) {
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
- } else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
+ } else if (!src_incr) {
*mbus = &bd->srcbus;
*sbus = &bd->dstbus;
} else {
@@ -869,10 +1188,16 @@ static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
if (pl08x->vd->pl080s)
llis_va[PL080S_LLI_CCTL2] = cctl2;
- if (cctl & PL080_CONTROL_SRC_INCR)
+ if (pl08x->vd->ftdmac020) {
+ /* FIXME: only memcpy so far so both increase */
bd->srcbus.addr += len;
- if (cctl & PL080_CONTROL_DST_INCR)
bd->dstbus.addr += len;
+ } else {
+ if (cctl & PL080_CONTROL_SRC_INCR)
+ bd->srcbus.addr += len;
+ if (cctl & PL080_CONTROL_DST_INCR)
+ bd->dstbus.addr += len;
+ }
BUG_ON(bd->remainder < len);
@@ -883,12 +1208,12 @@ static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x,
struct pl08x_lli_build_data *bd, u32 *cctl, u32 len,
int num_llis, size_t *total_bytes)
{
- *cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
+ *cctl = pl08x_lli_control_bits(pl08x, *cctl, 1, 1, len);
pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl, len);
(*total_bytes) += len;
}
-#ifdef VERBOSE_DEBUG
+#if 1
static void pl08x_dump_lli(struct pl08x_driver_data *pl08x,
const u32 *llis_va, int num_llis)
{
@@ -953,14 +1278,10 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
cctl = txd->cctl;
/* Find maximum width of the source bus */
- bd.srcbus.maxwidth =
- pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >>
- PL080_CONTROL_SWIDTH_SHIFT);
+ bd.srcbus.maxwidth = pl08x_get_bytes_for_lli(pl08x, cctl, true);
/* Find maximum width of the destination bus */
- bd.dstbus.maxwidth =
- pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >>
- PL080_CONTROL_DWIDTH_SHIFT);
+ bd.dstbus.maxwidth = pl08x_get_bytes_for_lli(pl08x, cctl, false);
list_for_each_entry(dsg, &txd->dsg_list, node) {
total_bytes = 0;
@@ -972,7 +1293,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
bd.srcbus.buswidth = bd.srcbus.maxwidth;
bd.dstbus.buswidth = bd.dstbus.maxwidth;
- pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
+ pl08x_choose_master_bus(pl08x, &bd, &mbus, &sbus, cctl);
dev_vdbg(&pl08x->adev->dev,
"src=0x%08llx%s/%u dst=0x%08llx%s/%u len=%zu\n",
@@ -1009,8 +1330,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
* supported. Thus, we can't have scattered addresses.
*/
if (!bd.remainder) {
- u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >>
- PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ u32 fc;
+
+ /* FTDMAC020 only does memory-to-memory */
+ if (pl08x->vd->ftdmac020)
+ fc = PL080_FLOW_MEM2MEM;
+ else
+ fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >>
+ PL080_CONFIG_FLOW_CONTROL_SHIFT;
if (!((fc >= PL080_FLOW_SRC2DST_DST) &&
(fc <= PL080_FLOW_SRC2DST_SRC))) {
dev_err(&pl08x->adev->dev, "%s sg len can't be zero",
@@ -1027,8 +1354,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
return 0;
}
- cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
- bd.dstbus.buswidth, 0);
+ cctl = pl08x_lli_control_bits(pl08x, cctl,
+ bd.srcbus.buswidth, bd.dstbus.buswidth,
+ 0);
pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
0, cctl, 0);
break;
@@ -1107,8 +1435,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
"size 0x%08zx (remainder 0x%08zx)\n",
__func__, lli_len, bd.remainder);
- cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
- bd.dstbus.buswidth, tsize);
+ cctl = pl08x_lli_control_bits(pl08x, cctl,
+ bd.srcbus.buswidth, bd.dstbus.buswidth,
+ tsize);
pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
lli_len, cctl, tsize);
total_bytes += lli_len;
@@ -1151,7 +1480,10 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
/* The final LLI terminates the LLI. */
last_lli[PL080_LLI_LLI] = 0;
/* The final LLI element shall also fire an interrupt. */
- last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN;
+ if (pl08x->vd->ftdmac020)
+ last_lli[PL080_LLI_CCTL] &= ~FTDMAC020_LLI_TC_MSK;
+ else
+ last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN;
}
pl08x_dump_lli(pl08x, llis_va, num_llis);
@@ -1317,14 +1649,25 @@ static const struct burst_table burst_sizes[] = {
* will be routed to each port. We try to have source and destination
* on separate ports, but always respect the allowable settings.
*/
-static u32 pl08x_select_bus(u8 src, u8 dst)
+static u32 pl08x_select_bus(bool ftdmac020, u8 src, u8 dst)
{
u32 cctl = 0;
+ u32 dst_ahb2;
+ u32 src_ahb2;
+
+ /* The FTDMAC020 use different bits to indicate src/dst bus */
+ if (ftdmac020) {
+ dst_ahb2 = FTDMAC020_LLI_DST_SEL;
+ src_ahb2 = FTDMAC020_LLI_SRC_SEL;
+ } else {
+ dst_ahb2 = PL080_CONTROL_DST_AHB2;
+ src_ahb2 = PL080_CONTROL_SRC_AHB2;
+ }
if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
- cctl |= PL080_CONTROL_DST_AHB2;
+ cctl |= dst_ahb2;
if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
- cctl |= PL080_CONTROL_SRC_AHB2;
+ cctl |= src_ahb2;
return cctl;
}
@@ -1412,14 +1755,134 @@ static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan)
{
struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
- if (txd) {
+ if (txd)
INIT_LIST_HEAD(&txd->dsg_list);
+ return txd;
+}
- /* Always enable error and terminal interrupts */
- txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK |
- PL080_CONFIG_TC_IRQ_MASK;
+static u32 pl08x_memcpy_cctl(struct pl08x_driver_data *pl08x)
+{
+ u32 cctl = 0;
+
+ /* Conjure cctl */
+ switch (pl08x->pd->memcpy_burst_size) {
+ default:
+ dev_err(&pl08x->adev->dev,
+ "illegal burst size for memcpy, set to 1\n");
+ /* Fall through */
+ case PL08X_BURST_SZ_1:
+ cctl |= PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_4:
+ cctl |= PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_8:
+ cctl |= PL080_BSIZE_8 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_8 << PL080_CONTROL_DB_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_16:
+ cctl |= PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_32:
+ cctl |= PL080_BSIZE_32 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_32 << PL080_CONTROL_DB_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_64:
+ cctl |= PL080_BSIZE_64 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_64 << PL080_CONTROL_DB_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_128:
+ cctl |= PL080_BSIZE_128 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_128 << PL080_CONTROL_DB_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_256:
+ cctl |= PL080_BSIZE_256 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_256 << PL080_CONTROL_DB_SIZE_SHIFT;
+ break;
}
- return txd;
+
+ switch (pl08x->pd->memcpy_bus_width) {
+ default:
+ dev_err(&pl08x->adev->dev,
+ "illegal bus width for memcpy, set to 8 bits\n");
+ /* Fall through */
+ case PL08X_BUS_WIDTH_8_BITS:
+ cctl |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT |
+ PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT;
+ break;
+ case PL08X_BUS_WIDTH_16_BITS:
+ cctl |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT |
+ PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT;
+ break;
+ case PL08X_BUS_WIDTH_32_BITS:
+ cctl |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT;
+ break;
+ }
+
+ /* Protection flags */
+ if (pl08x->pd->memcpy_prot_buff)
+ cctl |= PL080_CONTROL_PROT_BUFF;
+ if (pl08x->pd->memcpy_prot_cache)
+ cctl |= PL080_CONTROL_PROT_CACHE;
+
+ /* We are the kernel, so we are in privileged mode */
+ cctl |= PL080_CONTROL_PROT_SYS;
+
+ /* Both to be incremented or the code will break */
+ cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
+
+ if (pl08x->vd->dualmaster)
+ cctl |= pl08x_select_bus(false,
+ pl08x->mem_buses,
+ pl08x->mem_buses);
+
+ return cctl;
+}
+
+static u32 pl08x_ftdmac020_memcpy_cctl(struct pl08x_driver_data *pl08x)
+{
+ u32 cctl = 0;
+
+ /* Conjure cctl */
+ switch (pl08x->pd->memcpy_bus_width) {
+ default:
+ dev_err(&pl08x->adev->dev,
+ "illegal bus width for memcpy, set to 8 bits\n");
+ /* Fall through */
+ case PL08X_BUS_WIDTH_8_BITS:
+ cctl |= PL080_WIDTH_8BIT << FTDMAC020_LLI_SRC_WIDTH_SHIFT |
+ PL080_WIDTH_8BIT << FTDMAC020_LLI_DST_WIDTH_SHIFT;
+ break;
+ case PL08X_BUS_WIDTH_16_BITS:
+ cctl |= PL080_WIDTH_16BIT << FTDMAC020_LLI_SRC_WIDTH_SHIFT |
+ PL080_WIDTH_16BIT << FTDMAC020_LLI_DST_WIDTH_SHIFT;
+ break;
+ case PL08X_BUS_WIDTH_32_BITS:
+ cctl |= PL080_WIDTH_32BIT << FTDMAC020_LLI_SRC_WIDTH_SHIFT |
+ PL080_WIDTH_32BIT << FTDMAC020_LLI_DST_WIDTH_SHIFT;
+ break;
+ }
+
+ /*
+ * By default mask the TC IRQ on all LLIs, it will be unmasked on
+ * the last LLI item by other code.
+ */
+ cctl |= FTDMAC020_LLI_TC_MSK;
+
+ /*
+ * Both to be incremented so leave bits FTDMAC020_LLI_SRCAD_CTL
+ * and FTDMAC020_LLI_DSTAD_CTL as zero
+ */
+ if (pl08x->vd->dualmaster)
+ cctl |= pl08x_select_bus(true,
+ pl08x->mem_buses,
+ pl08x->mem_buses);
+
+ return cctl;
}
/*
@@ -1452,18 +1915,16 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
dsg->src_addr = src;
dsg->dst_addr = dest;
dsg->len = len;
-
- /* Set platform data for m2m */
- txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
- txd->cctl = pl08x->pd->memcpy_channel.cctl_memcpy &
- ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2);
-
- /* Both to be incremented or the code will break */
- txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
-
- if (pl08x->vd->dualmaster)
- txd->cctl |= pl08x_select_bus(pl08x->mem_buses,
- pl08x->mem_buses);
+ if (pl08x->vd->ftdmac020) {
+ /* Writing CCFG zero ENABLES all interrupts */
+ txd->ccfg = 0;
+ txd->cctl = pl08x_ftdmac020_memcpy_cctl(pl08x);
+ } else {
+ txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK |
+ PL080_CONFIG_TC_IRQ_MASK |
+ PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ txd->cctl = pl08x_memcpy_cctl(pl08x);
+ }
ret = pl08x_fill_llis_for_desc(plchan->host, txd);
if (!ret) {
@@ -1527,7 +1988,7 @@ static struct pl08x_txd *pl08x_init_txd(
return NULL;
}
- txd->cctl = cctl | pl08x_select_bus(src_buses, dst_buses);
+ txd->cctl = cctl | pl08x_select_bus(false, src_buses, dst_buses);
if (plchan->cfg.device_fc)
tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER :
@@ -1536,7 +1997,9 @@ static struct pl08x_txd *pl08x_init_txd(
tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER :
PL080_FLOW_PER2MEM;
- txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK |
+ PL080_CONFIG_TC_IRQ_MASK |
+ tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
ret = pl08x_request_mux(plchan);
if (ret < 0) {
@@ -1813,6 +2276,11 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
/* The Nomadik variant does not have the config register */
if (pl08x->vd->nomadik)
return;
+ /* The FTDMAC020 variant does this in another register */
+ if (pl08x->vd->ftdmac020) {
+ writel(PL080_CONFIG_ENABLE, pl08x->base + FTDMAC020_CSR);
+ return;
+ }
writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG);
}
@@ -1925,9 +2393,16 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
chan->signal = i;
pl08x_dma_slave_init(chan);
} else {
- chan->cd = &pl08x->pd->memcpy_channel;
+ chan->cd = kzalloc(sizeof(*chan->cd), GFP_KERNEL);
+ if (!chan->cd) {
+ kfree(chan);
+ return -ENOMEM;
+ }
+ chan->cd->bus_id = "memcpy";
+ chan->cd->periph_buses = pl08x->pd->mem_buses;
chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);
if (!chan->name) {
+ kfree(chan->cd);
kfree(chan);
return -ENOMEM;
}
@@ -2009,12 +2484,15 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data)
pl08x_state_str(chan->state));
}
- seq_printf(s, "\nPL08x virtual slave channels:\n");
- seq_printf(s, "CHANNEL:\tSTATE:\n");
- seq_printf(s, "--------\t------\n");
- list_for_each_entry(chan, &pl08x->slave.channels, vc.chan.device_node) {
- seq_printf(s, "%s\t\t%s\n", chan->name,
- pl08x_state_str(chan->state));
+ if (pl08x->has_slave) {
+ seq_printf(s, "\nPL08x virtual slave channels:\n");
+ seq_printf(s, "CHANNEL:\tSTATE:\n");
+ seq_printf(s, "--------\t------\n");
+ list_for_each_entry(chan, &pl08x->slave.channels,
+ vc.chan.device_node) {
+ seq_printf(s, "%s\t\t%s\n", chan->name,
+ pl08x_state_str(chan->state));
+ }
}
return 0;
@@ -2052,6 +2530,10 @@ static struct dma_chan *pl08x_find_chan_id(struct pl08x_driver_data *pl08x,
{
struct pl08x_dma_chan *chan;
+ /* Trying to get a slave channel from something with no slave support */
+ if (!pl08x->has_slave)
+ return NULL;
+
list_for_each_entry(chan, &pl08x->slave.channels, vc.chan.device_node) {
if (chan->signal == id)
return &chan->vc.chan;
@@ -2099,7 +2581,6 @@ static int pl08x_of_probe(struct amba_device *adev,
{
struct pl08x_platform_data *pd;
struct pl08x_channel_data *chanp = NULL;
- u32 cctl_memcpy = 0;
u32 val;
int ret;
int i;
@@ -2139,36 +2620,28 @@ static int pl08x_of_probe(struct amba_device *adev,
dev_err(&adev->dev, "illegal burst size for memcpy, set to 1\n");
/* Fall through */
case 1:
- cctl_memcpy |= PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT |
- PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT;
+ pd->memcpy_burst_size = PL08X_BURST_SZ_1;
break;
case 4:
- cctl_memcpy |= PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
- PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT;
+ pd->memcpy_burst_size = PL08X_BURST_SZ_4;
break;
case 8:
- cctl_memcpy |= PL080_BSIZE_8 << PL080_CONTROL_SB_SIZE_SHIFT |
- PL080_BSIZE_8 << PL080_CONTROL_DB_SIZE_SHIFT;
+ pd->memcpy_burst_size = PL08X_BURST_SZ_8;
break;
case 16:
- cctl_memcpy |= PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT |
- PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT;
+ pd->memcpy_burst_size = PL08X_BURST_SZ_16;
break;
case 32:
- cctl_memcpy |= PL080_BSIZE_32 << PL080_CONTROL_SB_SIZE_SHIFT |
- PL080_BSIZE_32 << PL080_CONTROL_DB_SIZE_SHIFT;
+ pd->memcpy_burst_size = PL08X_BURST_SZ_32;
break;
case 64:
- cctl_memcpy |= PL080_BSIZE_64 << PL080_CONTROL_SB_SIZE_SHIFT |
- PL080_BSIZE_64 << PL080_CONTROL_DB_SIZE_SHIFT;
+ pd->memcpy_burst_size = PL08X_BURST_SZ_64;
break;
case 128:
- cctl_memcpy |= PL080_BSIZE_128 << PL080_CONTROL_SB_SIZE_SHIFT |
- PL080_BSIZE_128 << PL080_CONTROL_DB_SIZE_SHIFT;
+ pd->memcpy_burst_size = PL08X_BURST_SZ_128;
break;
case 256:
- cctl_memcpy |= PL080_BSIZE_256 << PL080_CONTROL_SB_SIZE_SHIFT |
- PL080_BSIZE_256 << PL080_CONTROL_DB_SIZE_SHIFT;
+ pd->memcpy_burst_size = PL08X_BURST_SZ_256;
break;
}
@@ -2182,48 +2655,40 @@ static int pl08x_of_probe(struct amba_device *adev,
dev_err(&adev->dev, "illegal bus width for memcpy, set to 8 bits\n");
/* Fall through */
case 8:
- cctl_memcpy |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT |
- PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT;
+ pd->memcpy_bus_width = PL08X_BUS_WIDTH_8_BITS;
break;
case 16:
- cctl_memcpy |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT |
- PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT;
+ pd->memcpy_bus_width = PL08X_BUS_WIDTH_16_BITS;
break;
case 32:
- cctl_memcpy |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
- PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT;
+ pd->memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS;
break;
}
- /* This is currently the only thing making sense */
- cctl_memcpy |= PL080_CONTROL_PROT_SYS;
-
- /* Set up memcpy channel */
- pd->memcpy_channel.bus_id = "memcpy";
- pd->memcpy_channel.cctl_memcpy = cctl_memcpy;
- /* Use the buses that can access memory, obviously */
- pd->memcpy_channel.periph_buses = pd->mem_buses;
-
/*
* Allocate channel data for all possible slave channels (one
* for each possible signal), channels will then be allocated
* for a device and have it's AHB interfaces set up at
* translation time.
*/
- chanp = devm_kcalloc(&adev->dev,
- pl08x->vd->signals,
- sizeof(struct pl08x_channel_data),
- GFP_KERNEL);
- if (!chanp)
- return -ENOMEM;
+ if (pl08x->vd->signals) {
+ chanp = devm_kcalloc(&adev->dev,
+ pl08x->vd->signals,
+ sizeof(struct pl08x_channel_data),
+ GFP_KERNEL);
+ if (!chanp)
+ return -ENOMEM;
- pd->slave_channels = chanp;
- for (i = 0; i < pl08x->vd->signals; i++) {
- /* chanp->periph_buses will be assigned at translation */
- chanp->bus_id = kasprintf(GFP_KERNEL, "slave%d", i);
- chanp++;
+ pd->slave_channels = chanp;
+ for (i = 0; i < pl08x->vd->signals; i++) {
+ /*
+ * chanp->periph_buses will be assigned at translation
+ */
+ chanp->bus_id = kasprintf(GFP_KERNEL, "slave%d", i);
+ chanp++;
+ }
+ pd->num_slave_channels = pl08x->vd->signals;
}
- pd->num_slave_channels = pl08x->vd->signals;
pl08x->pd = pd;
@@ -2242,7 +2707,7 @@ static inline int pl08x_of_probe(struct amba_device *adev,
static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
{
struct pl08x_driver_data *pl08x;
- const struct vendor_data *vd = id->data;
+ struct vendor_data *vd = id->data;
struct device_node *np = adev->dev.of_node;
u32 tsfr_size;
int ret = 0;
@@ -2268,6 +2733,34 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
pl08x->adev = adev;
pl08x->vd = vd;
+ pl08x->base = ioremap(adev->res.start, resource_size(&adev->res));
+ if (!pl08x->base) {
+ ret = -ENOMEM;
+ goto out_no_ioremap;
+ }
+
+ if (vd->ftdmac020) {
+ u32 val;
+
+ val = readl(pl08x->base + FTDMAC020_REVISION);
+ dev_info(&pl08x->adev->dev, "FTDMAC020 %d.%d rel %d\n",
+ (val >> 16) & 0xff, (val >> 8) & 0xff, val & 0xff);
+ val = readl(pl08x->base + FTDMAC020_FEATURE);
+ dev_info(&pl08x->adev->dev, "FTDMAC020 %d channels, "
+ "%s built-in bridge, %s, %s linked lists\n",
+ (val >> 12) & 0x0f,
+ (val & BIT(10)) ? "no" : "has",
+ (val & BIT(9)) ? "AHB0 and AHB1" : "AHB0",
+ (val & BIT(8)) ? "supports" : "does not support");
+
+ /* Vendor data from feature register */
+ if (!(val & BIT(8)))
+ dev_warn(&pl08x->adev->dev,
+ "linked lists not supported, required\n");
+ vd->channels = (val >> 12) & 0x0f;
+ vd->dualmaster = !!(val & BIT(9));
+ }
+
/* Initialize memcpy engine */
dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
pl08x->memcpy.dev = &adev->dev;
@@ -2284,25 +2777,38 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
pl08x->memcpy.dst_addr_widths = PL80X_DMA_BUSWIDTHS;
pl08x->memcpy.directions = BIT(DMA_MEM_TO_MEM);
pl08x->memcpy.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
+ if (vd->ftdmac020)
+ pl08x->memcpy.copy_align = DMAENGINE_ALIGN_4_BYTES;
- /* Initialize slave engine */
- dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
- dma_cap_set(DMA_CYCLIC, pl08x->slave.cap_mask);
- pl08x->slave.dev = &adev->dev;
- pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources;
- pl08x->slave.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
- pl08x->slave.device_tx_status = pl08x_dma_tx_status;
- pl08x->slave.device_issue_pending = pl08x_issue_pending;
- pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg;
- pl08x->slave.device_prep_dma_cyclic = pl08x_prep_dma_cyclic;
- pl08x->slave.device_config = pl08x_config;
- pl08x->slave.device_pause = pl08x_pause;
- pl08x->slave.device_resume = pl08x_resume;
- pl08x->slave.device_terminate_all = pl08x_terminate_all;
- pl08x->slave.src_addr_widths = PL80X_DMA_BUSWIDTHS;
- pl08x->slave.dst_addr_widths = PL80X_DMA_BUSWIDTHS;
- pl08x->slave.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
- pl08x->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
+
+ /*
+ * Initialize slave engine, if the block has no signals, that means
+ * we have no slave support.
+ */
+ if (vd->signals) {
+ pl08x->has_slave = true;
+ dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
+ dma_cap_set(DMA_CYCLIC, pl08x->slave.cap_mask);
+ pl08x->slave.dev = &adev->dev;
+ pl08x->slave.device_free_chan_resources =
+ pl08x_free_chan_resources;
+ pl08x->slave.device_prep_dma_interrupt =
+ pl08x_prep_dma_interrupt;
+ pl08x->slave.device_tx_status = pl08x_dma_tx_status;
+ pl08x->slave.device_issue_pending = pl08x_issue_pending;
+ pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg;
+ pl08x->slave.device_prep_dma_cyclic = pl08x_prep_dma_cyclic;
+ pl08x->slave.device_config = pl08x_config;
+ pl08x->slave.device_pause = pl08x_pause;
+ pl08x->slave.device_resume = pl08x_resume;
+ pl08x->slave.device_terminate_all = pl08x_terminate_all;
+ pl08x->slave.src_addr_widths = PL80X_DMA_BUSWIDTHS;
+ pl08x->slave.dst_addr_widths = PL80X_DMA_BUSWIDTHS;
+ pl08x->slave.directions =
+ BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+ pl08x->slave.residue_granularity =
+ DMA_RESIDUE_GRANULARITY_SEGMENT;
+ }
/* Get the platform data */
pl08x->pd = dev_get_platdata(&adev->dev);
@@ -2344,19 +2850,18 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
goto out_no_lli_pool;
}
- pl08x->base = ioremap(adev->res.start, resource_size(&adev->res));
- if (!pl08x->base) {
- ret = -ENOMEM;
- goto out_no_ioremap;
- }
-
/* Turn on the PL08x */
pl08x_ensure_on(pl08x);
- /* Attach the interrupt handler */
- writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
+ /* Clear any pending interrupts */
+ if (vd->ftdmac020)
+ /* This variant has error IRQs in bits 16-19 */
+ writel(0x0000FFFF, pl08x->base + PL080_ERR_CLEAR);
+ else
+ writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
writel(0x000000FF, pl08x->base + PL080_TC_CLEAR);
+ /* Attach the interrupt handler */
ret = request_irq(adev->irq[0], pl08x_irq, 0, DRIVER_NAME, pl08x);
if (ret) {
dev_err(&adev->dev, "%s failed to request interrupt %d\n",
@@ -2377,7 +2882,25 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
ch->id = i;
ch->base = pl08x->base + PL080_Cx_BASE(i);
- ch->reg_config = ch->base + vd->config_offset;
+ if (vd->ftdmac020) {
+ /* FTDMA020 has a special channel busy register */
+ ch->reg_busy = ch->base + FTDMAC020_CH_BUSY;
+ ch->reg_config = ch->base + FTDMAC020_CH_CFG;
+ ch->reg_control = ch->base + FTDMAC020_CH_CSR;
+ ch->reg_src = ch->base + FTDMAC020_CH_SRC_ADDR;
+ ch->reg_dst = ch->base + FTDMAC020_CH_DST_ADDR;
+ ch->reg_lli = ch->base + FTDMAC020_CH_LLP;
+ ch->ftdmac020 = true;
+ } else {
+ ch->reg_config = ch->base + vd->config_offset;
+ ch->reg_control = ch->base + PL080_CH_CONTROL;
+ ch->reg_src = ch->base + PL080_CH_SRC_ADDR;
+ ch->reg_dst = ch->base + PL080_CH_DST_ADDR;
+ ch->reg_lli = ch->base + PL080_CH_LLI;
+ }
+ if (vd->pl080s)
+ ch->pl080s = true;
+
spin_lock_init(&ch->lock);
/*
@@ -2410,13 +2933,15 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
}
/* Register slave channels */
- ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
- pl08x->pd->num_slave_channels, true);
- if (ret < 0) {
- dev_warn(&pl08x->adev->dev,
- "%s failed to enumerate slave channels - %d\n",
- __func__, ret);
- goto out_no_slave;
+ if (pl08x->has_slave) {
+ ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
+ pl08x->pd->num_slave_channels, true);
+ if (ret < 0) {
+ dev_warn(&pl08x->adev->dev,
+ "%s failed to enumerate slave channels - %d\n",
+ __func__, ret);
+ goto out_no_slave;
+ }
}
ret = dma_async_device_register(&pl08x->memcpy);
@@ -2427,12 +2952,14 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
goto out_no_memcpy_reg;
}
- ret = dma_async_device_register(&pl08x->slave);
- if (ret) {
- dev_warn(&pl08x->adev->dev,
+ if (pl08x->has_slave) {
+ ret = dma_async_device_register(&pl08x->slave);
+ if (ret) {
+ dev_warn(&pl08x->adev->dev,
"%s failed to register slave as an async device - %d\n",
__func__, ret);
- goto out_no_slave_reg;
+ goto out_no_slave_reg;
+ }
}
amba_set_drvdata(adev, pl08x);
@@ -2446,7 +2973,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
out_no_slave_reg:
dma_async_device_unregister(&pl08x->memcpy);
out_no_memcpy_reg:
- pl08x_free_virtual_channels(&pl08x->slave);
+ if (pl08x->has_slave)
+ pl08x_free_virtual_channels(&pl08x->slave);
out_no_slave:
pl08x_free_virtual_channels(&pl08x->memcpy);
out_no_memcpy:
@@ -2454,11 +2982,11 @@ out_no_memcpy:
out_no_phychans:
free_irq(adev->irq[0], pl08x);
out_no_irq:
- iounmap(pl08x->base);
-out_no_ioremap:
dma_pool_destroy(pl08x->pool);
out_no_lli_pool:
out_no_platdata:
+ iounmap(pl08x->base);
+out_no_ioremap:
kfree(pl08x);
out_no_pl08x:
amba_release_regions(adev);
@@ -2499,6 +3027,12 @@ static struct vendor_data vendor_pl081 = {
.max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
};
+static struct vendor_data vendor_ftdmac020 = {
+ .config_offset = PL080_CH_CONFIG,
+ .ftdmac020 = true,
+ .max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
+};
+
static struct amba_id pl08x_ids[] = {
/* Samsung PL080S variant */
{
@@ -2524,6 +3058,12 @@ static struct amba_id pl08x_ids[] = {
.mask = 0x00ffffff,
.data = &vendor_nomadik,
},
+ /* Faraday Technology FTDMAC020 */
+ {
+ .id = 0x0003b080,
+ .mask = 0x000fffff,
+ .data = &vendor_ftdmac020,
+ },
{ 0, 0 },
};