diff options
Diffstat (limited to 'drivers/hwmon/pmbus/pmbus_core.c')
-rw-r--r-- | drivers/hwmon/pmbus/pmbus_core.c | 114 |
1 files changed, 82 insertions, 32 deletions
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 5c1b6cf31701..00460d8d8423 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -160,7 +160,7 @@ int pmbus_set_page(struct i2c_client *client, u8 page) rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE); if (newpage != page) - rv = -EINVAL; + rv = -EIO; else data->currpage = page; } @@ -182,6 +182,24 @@ int pmbus_write_byte(struct i2c_client *client, int page, u8 value) } EXPORT_SYMBOL_GPL(pmbus_write_byte); +/* + * _pmbus_write_byte() is similar to pmbus_write_byte(), but checks if + * a device specific mapping funcion exists and calls it if necessary. + */ +static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + int status; + + if (info->write_byte) { + status = info->write_byte(client, page, value); + if (status != -ENODATA) + return status; + } + return pmbus_write_byte(client, page, value); +} + int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word) { int rv; @@ -211,7 +229,7 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg, return status; } if (reg >= PMBUS_VIRT_BASE) - return -EINVAL; + return -ENXIO; return pmbus_write_word_data(client, page, reg, word); } @@ -243,7 +261,7 @@ static int _pmbus_read_word_data(struct i2c_client *client, int page, int reg) return status; } if (reg >= PMBUS_VIRT_BASE) - return -EINVAL; + return -ENXIO; return pmbus_read_word_data(client, page, reg); } @@ -281,7 +299,7 @@ static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg) static void pmbus_clear_fault_page(struct i2c_client *client, int page) { - pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); + _pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); } void pmbus_clear_faults(struct i2c_client *client) @@ -298,11 +316,11 @@ static int pmbus_check_status_cml(struct i2c_client *client) { int status, status2; - status = pmbus_read_byte_data(client, -1, PMBUS_STATUS_BYTE); + status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_BYTE); if (status < 0 || (status & PB_STATUS_CML)) { - status2 = pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML); + status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML); if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND)) - return -EINVAL; + return -EIO; } return 0; } @@ -353,8 +371,8 @@ static struct pmbus_data *pmbus_update_device(struct device *dev) for (i = 0; i < info->pages; i++) data->status[PB_STATUS_BASE + i] - = pmbus_read_byte_data(client, i, - PMBUS_STATUS_BYTE); + = _pmbus_read_byte_data(client, i, + PMBUS_STATUS_BYTE); for (i = 0; i < info->pages; i++) { if (!(info->func[i] & PMBUS_HAVE_STATUS_VOUT)) continue; @@ -427,13 +445,8 @@ static long pmbus_reg2data_linear(struct pmbus_data *data, exponent = data->exponent; mantissa = (u16) sensor->data; } else { /* LINEAR11 */ - exponent = (sensor->data >> 11) & 0x001f; - mantissa = sensor->data & 0x07ff; - - if (exponent > 0x0f) - exponent |= 0xffe0; /* sign extend exponent */ - if (mantissa > 0x03ff) - mantissa |= 0xfffff800; /* sign extend mantissa */ + exponent = ((s16)sensor->data) >> 11; + mantissa = ((s16)((sensor->data & 0x7ff) << 5)) >> 5; } val = mantissa; @@ -960,6 +973,8 @@ static void pmbus_find_max_attr(struct i2c_client *client, struct pmbus_limit_attr { u16 reg; /* Limit register */ bool update; /* True if register needs updates */ + bool low; /* True if low limit; for limits with compare + functions only */ const char *attr; /* Attribute name */ const char *alarm; /* Alarm attribute name */ u32 sbit; /* Alarm attribute status bit */ @@ -1011,7 +1026,8 @@ static bool pmbus_add_limit_attrs(struct i2c_client *client, if (attr->compare) { pmbus_add_boolean_cmp(data, name, l->alarm, index, - cbase, cindex, + l->low ? cindex : cbase, + l->low ? cbase : cindex, attr->sbase + page, l->sbit); } else { pmbus_add_boolean_reg(data, name, @@ -1348,11 +1364,13 @@ static const struct pmbus_sensor_attr power_attributes[] = { static const struct pmbus_limit_attr temp_limit_attrs[] = { { .reg = PMBUS_UT_WARN_LIMIT, + .low = true, .attr = "min", .alarm = "min_alarm", .sbit = PB_TEMP_UT_WARNING, }, { .reg = PMBUS_UT_FAULT_LIMIT, + .low = true, .attr = "lcrit", .alarm = "lcrit_alarm", .sbit = PB_TEMP_UT_FAULT, @@ -1378,14 +1396,51 @@ static const struct pmbus_limit_attr temp_limit_attrs[] = { } }; -static const struct pmbus_limit_attr temp_limit_attrs23[] = { +static const struct pmbus_limit_attr temp_limit_attrs2[] = { + { + .reg = PMBUS_UT_WARN_LIMIT, + .low = true, + .attr = "min", + .alarm = "min_alarm", + .sbit = PB_TEMP_UT_WARNING, + }, { + .reg = PMBUS_UT_FAULT_LIMIT, + .low = true, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_TEMP_UT_FAULT, + }, { + .reg = PMBUS_OT_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_TEMP_OT_WARNING, + }, { + .reg = PMBUS_OT_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_TEMP_OT_FAULT, + }, { + .reg = PMBUS_VIRT_READ_TEMP2_MIN, + .attr = "lowest", + }, { + .reg = PMBUS_VIRT_READ_TEMP2_MAX, + .attr = "highest", + }, { + .reg = PMBUS_VIRT_RESET_TEMP2_HISTORY, + .attr = "reset_history", + } +}; + +static const struct pmbus_limit_attr temp_limit_attrs3[] = { { .reg = PMBUS_UT_WARN_LIMIT, + .low = true, .attr = "min", .alarm = "min_alarm", .sbit = PB_TEMP_UT_WARNING, }, { .reg = PMBUS_UT_FAULT_LIMIT, + .low = true, .attr = "lcrit", .alarm = "lcrit_alarm", .sbit = PB_TEMP_UT_FAULT, @@ -1425,8 +1480,8 @@ static const struct pmbus_sensor_attr temp_attributes[] = { .sfunc = PMBUS_HAVE_STATUS_TEMP, .sbase = PB_STATUS_TEMP_BASE, .gbit = PB_STATUS_TEMPERATURE, - .limit = temp_limit_attrs23, - .nlimit = ARRAY_SIZE(temp_limit_attrs23), + .limit = temp_limit_attrs2, + .nlimit = ARRAY_SIZE(temp_limit_attrs2), }, { .reg = PMBUS_READ_TEMPERATURE_3, .class = PSC_TEMPERATURE, @@ -1437,8 +1492,8 @@ static const struct pmbus_sensor_attr temp_attributes[] = { .sfunc = PMBUS_HAVE_STATUS_TEMP, .sbase = PB_STATUS_TEMP_BASE, .gbit = PB_STATUS_TEMPERATURE, - .limit = temp_limit_attrs23, - .nlimit = ARRAY_SIZE(temp_limit_attrs23), + .limit = temp_limit_attrs3, + .nlimit = ARRAY_SIZE(temp_limit_attrs3), } }; @@ -1568,10 +1623,10 @@ static void pmbus_find_attributes(struct i2c_client *client, static int pmbus_identify_common(struct i2c_client *client, struct pmbus_data *data) { - int vout_mode = -1, exponent; + int vout_mode = -1; if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) - vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); + vout_mode = _pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); if (vout_mode >= 0 && vout_mode != 0xff) { /* * Not all chips support the VOUT_MODE command, @@ -1582,11 +1637,7 @@ static int pmbus_identify_common(struct i2c_client *client, if (data->info->format[PSC_VOLTAGE_OUT] != linear) return -ENODEV; - exponent = vout_mode & 0x1f; - /* and sign-extend it */ - if (exponent & 0x10) - exponent |= ~0x1f; - data->exponent = exponent; + data->exponent = ((s8)(vout_mode << 3)) >> 3; break; case 1: /* VID mode */ if (data->info->format[PSC_VOLTAGE_OUT] != vid) @@ -1657,7 +1708,7 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, if (info->pages <= 0 || info->pages > PMBUS_PAGES) { dev_err(&client->dev, "Bad number of PMBus pages: %d\n", info->pages); - ret = -EINVAL; + ret = -ENODEV; goto out_data; } @@ -1739,7 +1790,7 @@ out_data: } EXPORT_SYMBOL_GPL(pmbus_do_probe); -int pmbus_do_remove(struct i2c_client *client) +void pmbus_do_remove(struct i2c_client *client) { struct pmbus_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); @@ -1749,7 +1800,6 @@ int pmbus_do_remove(struct i2c_client *client) kfree(data->booleans); kfree(data->sensors); kfree(data); - return 0; } EXPORT_SYMBOL_GPL(pmbus_do_remove); |