diff options
Diffstat (limited to 'drivers/iio/imu')
-rw-r--r-- | drivers/iio/imu/fxos8700_core.c | 111 | ||||
-rw-r--r-- | drivers/iio/imu/st_lsm6dsx/Kconfig | 1 |
2 files changed, 90 insertions, 22 deletions
diff --git a/drivers/iio/imu/fxos8700_core.c b/drivers/iio/imu/fxos8700_core.c index 423cfe526f2a..6d189c4b9ff9 100644 --- a/drivers/iio/imu/fxos8700_core.c +++ b/drivers/iio/imu/fxos8700_core.c @@ -10,6 +10,7 @@ #include <linux/regmap.h> #include <linux/acpi.h> #include <linux/bitops.h> +#include <linux/bitfield.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -144,9 +145,8 @@ #define FXOS8700_NVM_DATA_BNK0 0xa7 /* Bit definitions for FXOS8700_CTRL_REG1 */ -#define FXOS8700_CTRL_ODR_MSK 0x38 #define FXOS8700_CTRL_ODR_MAX 0x00 -#define FXOS8700_CTRL_ODR_MIN GENMASK(4, 3) +#define FXOS8700_CTRL_ODR_MSK GENMASK(5, 3) /* Bit definitions for FXOS8700_M_CTRL_REG1 */ #define FXOS8700_HMS_MASK GENMASK(1, 0) @@ -320,7 +320,7 @@ static enum fxos8700_sensor fxos8700_to_sensor(enum iio_chan_type iio_type) switch (iio_type) { case IIO_ACCEL: return FXOS8700_ACCEL; - case IIO_ANGL_VEL: + case IIO_MAGN: return FXOS8700_MAGN; default: return -EINVAL; @@ -345,15 +345,35 @@ static int fxos8700_set_active_mode(struct fxos8700_data *data, static int fxos8700_set_scale(struct fxos8700_data *data, enum fxos8700_sensor t, int uscale) { - int i; + int i, ret, val; + bool active_mode; static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale); struct device *dev = regmap_get_device(data->regmap); if (t == FXOS8700_MAGN) { - dev_err(dev, "Magnetometer scale is locked at 1200uT\n"); + dev_err(dev, "Magnetometer scale is locked at 0.001Gs\n"); return -EINVAL; } + /* + * When device is in active mode, it failed to set an ACCEL + * full-scale range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. + * This is not align with the datasheet, but it is a fxos8700 + * chip behavier. Set the device in standby mode before setting + * an ACCEL full-scale range. + */ + ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val); + if (ret) + return ret; + + active_mode = val & FXOS8700_ACTIVE; + if (active_mode) { + ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, + val & ~FXOS8700_ACTIVE); + if (ret) + return ret; + } + for (i = 0; i < scale_num; i++) if (fxos8700_accel_scale[i].uscale == uscale) break; @@ -361,8 +381,12 @@ static int fxos8700_set_scale(struct fxos8700_data *data, if (i == scale_num) return -EINVAL; - return regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, + ret = regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, fxos8700_accel_scale[i].bits); + if (ret) + return ret; + return regmap_write(data->regmap, FXOS8700_CTRL_REG1, + active_mode); } static int fxos8700_get_scale(struct fxos8700_data *data, @@ -372,7 +396,7 @@ static int fxos8700_get_scale(struct fxos8700_data *data, static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale); if (t == FXOS8700_MAGN) { - *uscale = 1200; /* Magnetometer is locked at 1200uT */ + *uscale = 1000; /* Magnetometer is locked at 0.001Gs */ return 0; } @@ -394,22 +418,61 @@ static int fxos8700_get_data(struct fxos8700_data *data, int chan_type, int axis, int *val) { u8 base, reg; + s16 tmp; int ret; - enum fxos8700_sensor type = fxos8700_to_sensor(chan_type); - base = type ? FXOS8700_OUT_X_MSB : FXOS8700_M_OUT_X_MSB; + /* + * Different register base addresses varies with channel types. + * This bug hasn't been noticed before because using an enum is + * really hard to read. Use an a switch statement to take over that. + */ + switch (chan_type) { + case IIO_ACCEL: + base = FXOS8700_OUT_X_MSB; + break; + case IIO_MAGN: + base = FXOS8700_M_OUT_X_MSB; + break; + default: + return -EINVAL; + } /* Block read 6 bytes of device output registers to avoid data loss */ ret = regmap_bulk_read(data->regmap, base, data->buf, - FXOS8700_DATA_BUF_SIZE); + sizeof(data->buf)); if (ret) return ret; /* Convert axis to buffer index */ reg = axis - IIO_MOD_X; + /* + * Convert to native endianness. The accel data and magn data + * are signed, so a forced type conversion is needed. + */ + tmp = be16_to_cpu(data->buf[reg]); + + /* + * ACCEL output data registers contain the X-axis, Y-axis, and Z-axis + * 14-bit left-justified sample data and MAGN output data registers + * contain the X-axis, Y-axis, and Z-axis 16-bit sample data. Apply + * a signed 2 bits right shift to the readback raw data from ACCEL + * output data register and keep that from MAGN sensor as the origin. + * Value should be extended to 32 bit. + */ + switch (chan_type) { + case IIO_ACCEL: + tmp = tmp >> 2; + break; + case IIO_MAGN: + /* Nothing to do */ + break; + default: + return -EINVAL; + } + /* Convert to native endianness */ - *val = sign_extend32(be16_to_cpu(data->buf[reg]), 15); + *val = sign_extend32(tmp, 15); return 0; } @@ -445,10 +508,9 @@ static int fxos8700_set_odr(struct fxos8700_data *data, enum fxos8700_sensor t, if (i >= odr_num) return -EINVAL; - return regmap_update_bits(data->regmap, - FXOS8700_CTRL_REG1, - FXOS8700_CTRL_ODR_MSK + FXOS8700_ACTIVE, - fxos8700_odr[i].bits << 3 | active_mode); + val &= ~FXOS8700_CTRL_ODR_MSK; + val |= FIELD_PREP(FXOS8700_CTRL_ODR_MSK, fxos8700_odr[i].bits) | FXOS8700_ACTIVE; + return regmap_write(data->regmap, FXOS8700_CTRL_REG1, val); } static int fxos8700_get_odr(struct fxos8700_data *data, enum fxos8700_sensor t, @@ -461,7 +523,7 @@ static int fxos8700_get_odr(struct fxos8700_data *data, enum fxos8700_sensor t, if (ret) return ret; - val &= FXOS8700_CTRL_ODR_MSK; + val = FIELD_GET(FXOS8700_CTRL_ODR_MSK, val); for (i = 0; i < odr_num; i++) if (val == fxos8700_odr[i].bits) @@ -526,7 +588,7 @@ static IIO_CONST_ATTR(in_accel_sampling_frequency_available, static IIO_CONST_ATTR(in_magn_sampling_frequency_available, "1.5625 6.25 12.5 50 100 200 400 800"); static IIO_CONST_ATTR(in_accel_scale_available, "0.000244 0.000488 0.000976"); -static IIO_CONST_ATTR(in_magn_scale_available, "0.000001200"); +static IIO_CONST_ATTR(in_magn_scale_available, "0.001000"); static struct attribute *fxos8700_attrs[] = { &iio_const_attr_in_accel_sampling_frequency_available.dev_attr.attr, @@ -592,14 +654,19 @@ static int fxos8700_chip_init(struct fxos8700_data *data, bool use_spi) if (ret) return ret; - /* Max ODR (800Hz individual or 400Hz hybrid), active mode */ - ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, - FXOS8700_CTRL_ODR_MAX | FXOS8700_ACTIVE); + /* + * Set max full-scale range (+/-8G) for ACCEL sensor in chip + * initialization then activate the device. + */ + ret = regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, MODE_8G); if (ret) return ret; - /* Set for max full-scale range (+/-8G) */ - return regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, MODE_8G); + /* Max ODR (800Hz individual or 400Hz hybrid), active mode */ + return regmap_update_bits(data->regmap, FXOS8700_CTRL_REG1, + FXOS8700_CTRL_ODR_MSK | FXOS8700_ACTIVE, + FIELD_PREP(FXOS8700_CTRL_ODR_MSK, FXOS8700_CTRL_ODR_MAX) | + FXOS8700_ACTIVE); } static void fxos8700_chip_uninit(void *data) diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index f6660847fb58..8c16cdacf2f2 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -4,6 +4,7 @@ config IIO_ST_LSM6DSX tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" depends on (I2C || SPI || I3C) select IIO_BUFFER + select IIO_TRIGGERED_BUFFER select IIO_KFIFO_BUF select IIO_ST_LSM6DSX_I2C if (I2C) select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) |