diff options
Diffstat (limited to 'drivers/media/video/smiapp-pll.c')
-rw-r--r-- | drivers/media/video/smiapp-pll.c | 418 |
1 files changed, 0 insertions, 418 deletions
diff --git a/drivers/media/video/smiapp-pll.c b/drivers/media/video/smiapp-pll.c deleted file mode 100644 index a2e41a21dc65..000000000000 --- a/drivers/media/video/smiapp-pll.c +++ /dev/null @@ -1,418 +0,0 @@ -/* - * drivers/media/video/smiapp-pll.c - * - * Generic driver for SMIA/SMIA++ compliant camera modules - * - * Copyright (C) 2011--2012 Nokia Corporation - * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/gcd.h> -#include <linux/lcm.h> -#include <linux/module.h> - -#include "smiapp-pll.h" - -/* Return an even number or one. */ -static inline uint32_t clk_div_even(uint32_t a) -{ - return max_t(uint32_t, 1, a & ~1); -} - -/* Return an even number or one. */ -static inline uint32_t clk_div_even_up(uint32_t a) -{ - if (a == 1) - return 1; - return (a + 1) & ~1; -} - -static inline uint32_t is_one_or_even(uint32_t a) -{ - if (a == 1) - return 1; - if (a & 1) - return 0; - - return 1; -} - -static int bounds_check(struct device *dev, uint32_t val, - uint32_t min, uint32_t max, char *str) -{ - if (val >= min && val <= max) - return 0; - - dev_warn(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max); - - return -EINVAL; -} - -static void print_pll(struct device *dev, struct smiapp_pll *pll) -{ - dev_dbg(dev, "pre_pll_clk_div\t%d\n", pll->pre_pll_clk_div); - dev_dbg(dev, "pll_multiplier \t%d\n", pll->pll_multiplier); - if (pll->flags != SMIAPP_PLL_FLAG_NO_OP_CLOCKS) { - dev_dbg(dev, "op_sys_clk_div \t%d\n", pll->op_sys_clk_div); - dev_dbg(dev, "op_pix_clk_div \t%d\n", pll->op_pix_clk_div); - } - dev_dbg(dev, "vt_sys_clk_div \t%d\n", pll->vt_sys_clk_div); - dev_dbg(dev, "vt_pix_clk_div \t%d\n", pll->vt_pix_clk_div); - - dev_dbg(dev, "ext_clk_freq_hz \t%d\n", pll->ext_clk_freq_hz); - dev_dbg(dev, "pll_ip_clk_freq_hz \t%d\n", pll->pll_ip_clk_freq_hz); - dev_dbg(dev, "pll_op_clk_freq_hz \t%d\n", pll->pll_op_clk_freq_hz); - if (pll->flags & SMIAPP_PLL_FLAG_NO_OP_CLOCKS) { - dev_dbg(dev, "op_sys_clk_freq_hz \t%d\n", - pll->op_sys_clk_freq_hz); - dev_dbg(dev, "op_pix_clk_freq_hz \t%d\n", - pll->op_pix_clk_freq_hz); - } - dev_dbg(dev, "vt_sys_clk_freq_hz \t%d\n", pll->vt_sys_clk_freq_hz); - dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz); -} - -int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits, - struct smiapp_pll *pll) -{ - uint32_t sys_div; - uint32_t best_pix_div = INT_MAX >> 1; - uint32_t vt_op_binning_div; - uint32_t lane_op_clock_ratio; - uint32_t mul, div; - uint32_t more_mul_min, more_mul_max; - uint32_t more_mul_factor; - uint32_t min_vt_div, max_vt_div, vt_div; - uint32_t min_sys_div, max_sys_div; - unsigned int i; - int rval; - - if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE) - lane_op_clock_ratio = pll->lanes; - else - lane_op_clock_ratio = 1; - dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio); - - dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal, - pll->binning_vertical); - - /* CSI transfers 2 bits per clock per lane; thus times 2 */ - pll->pll_op_clk_freq_hz = pll->link_freq * 2 - * (pll->lanes / lane_op_clock_ratio); - - /* Figure out limits for pre-pll divider based on extclk */ - dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n", - limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div); - limits->max_pre_pll_clk_div = - min_t(uint16_t, limits->max_pre_pll_clk_div, - clk_div_even(pll->ext_clk_freq_hz / - limits->min_pll_ip_freq_hz)); - limits->min_pre_pll_clk_div = - max_t(uint16_t, limits->min_pre_pll_clk_div, - clk_div_even_up( - DIV_ROUND_UP(pll->ext_clk_freq_hz, - limits->max_pll_ip_freq_hz))); - dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n", - limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div); - - i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz); - mul = div_u64(pll->pll_op_clk_freq_hz, i); - div = pll->ext_clk_freq_hz / i; - dev_dbg(dev, "mul %d / div %d\n", mul, div); - - limits->min_pre_pll_clk_div = - max_t(uint16_t, limits->min_pre_pll_clk_div, - clk_div_even_up( - DIV_ROUND_UP(mul * pll->ext_clk_freq_hz, - limits->max_pll_op_freq_hz))); - dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n", - limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div); - - if (limits->min_pre_pll_clk_div > limits->max_pre_pll_clk_div) { - dev_err(dev, "unable to compute pre_pll divisor\n"); - return -EINVAL; - } - - pll->pre_pll_clk_div = limits->min_pre_pll_clk_div; - - /* - * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be - * too high. - */ - dev_dbg(dev, "pre_pll_clk_div %d\n", pll->pre_pll_clk_div); - - /* Don't go above max pll multiplier. */ - more_mul_max = limits->max_pll_multiplier / mul; - dev_dbg(dev, "more_mul_max: max_pll_multiplier check: %d\n", - more_mul_max); - /* Don't go above max pll op frequency. */ - more_mul_max = - min_t(int, - more_mul_max, - limits->max_pll_op_freq_hz - / (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul)); - dev_dbg(dev, "more_mul_max: max_pll_op_freq_hz check: %d\n", - more_mul_max); - /* Don't go above the division capability of op sys clock divider. */ - more_mul_max = min(more_mul_max, - limits->max_op_sys_clk_div * pll->pre_pll_clk_div - / div); - dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n", - more_mul_max); - /* Ensure we won't go above min_pll_multiplier. */ - more_mul_max = min(more_mul_max, - DIV_ROUND_UP(limits->max_pll_multiplier, mul)); - dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %d\n", - more_mul_max); - - /* Ensure we won't go below min_pll_op_freq_hz. */ - more_mul_min = DIV_ROUND_UP(limits->min_pll_op_freq_hz, - pll->ext_clk_freq_hz / pll->pre_pll_clk_div - * mul); - dev_dbg(dev, "more_mul_min: min_pll_op_freq_hz check: %d\n", - more_mul_min); - /* Ensure we won't go below min_pll_multiplier. */ - more_mul_min = max(more_mul_min, - DIV_ROUND_UP(limits->min_pll_multiplier, mul)); - dev_dbg(dev, "more_mul_min: min_pll_multiplier check: %d\n", - more_mul_min); - - if (more_mul_min > more_mul_max) { - dev_warn(dev, - "unable to compute more_mul_min and more_mul_max"); - return -EINVAL; - } - - more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div; - dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor); - more_mul_factor = lcm(more_mul_factor, limits->min_op_sys_clk_div); - dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n", - more_mul_factor); - i = roundup(more_mul_min, more_mul_factor); - if (!is_one_or_even(i)) - i <<= 1; - - dev_dbg(dev, "final more_mul: %d\n", i); - if (i > more_mul_max) { - dev_warn(dev, "final more_mul is bad, max %d", more_mul_max); - return -EINVAL; - } - - pll->pll_multiplier = mul * i; - pll->op_sys_clk_div = div * i / pll->pre_pll_clk_div; - dev_dbg(dev, "op_sys_clk_div: %d\n", pll->op_sys_clk_div); - - pll->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz - / pll->pre_pll_clk_div; - - pll->pll_op_clk_freq_hz = pll->pll_ip_clk_freq_hz - * pll->pll_multiplier; - - /* Derive pll_op_clk_freq_hz. */ - pll->op_sys_clk_freq_hz = - pll->pll_op_clk_freq_hz / pll->op_sys_clk_div; - - pll->op_pix_clk_div = pll->bits_per_pixel; - dev_dbg(dev, "op_pix_clk_div: %d\n", pll->op_pix_clk_div); - - pll->op_pix_clk_freq_hz = - pll->op_sys_clk_freq_hz / pll->op_pix_clk_div; - - /* - * Some sensors perform analogue binning and some do this - * digitally. The ones doing this digitally can be roughly be - * found out using this formula. The ones doing this digitally - * should run at higher clock rate, so smaller divisor is used - * on video timing side. - */ - if (limits->min_line_length_pck_bin > limits->min_line_length_pck - / pll->binning_horizontal) - vt_op_binning_div = pll->binning_horizontal; - else - vt_op_binning_div = 1; - dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div); - - /* - * Profile 2 supports vt_pix_clk_div E [4, 10] - * - * Horizontal binning can be used as a base for difference in - * divisors. One must make sure that horizontal blanking is - * enough to accommodate the CSI-2 sync codes. - * - * Take scaling factor into account as well. - * - * Find absolute limits for the factor of vt divider. - */ - dev_dbg(dev, "scale_m: %d\n", pll->scale_m); - min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div - * pll->scale_n, - lane_op_clock_ratio * vt_op_binning_div - * pll->scale_m); - - /* Find smallest and biggest allowed vt divisor. */ - dev_dbg(dev, "min_vt_div: %d\n", min_vt_div); - min_vt_div = max(min_vt_div, - DIV_ROUND_UP(pll->pll_op_clk_freq_hz, - limits->max_vt_pix_clk_freq_hz)); - dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n", - min_vt_div); - min_vt_div = max_t(uint32_t, min_vt_div, - limits->min_vt_pix_clk_div - * limits->min_vt_sys_clk_div); - dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div); - - max_vt_div = limits->max_vt_sys_clk_div * limits->max_vt_pix_clk_div; - dev_dbg(dev, "max_vt_div: %d\n", max_vt_div); - max_vt_div = min(max_vt_div, - DIV_ROUND_UP(pll->pll_op_clk_freq_hz, - limits->min_vt_pix_clk_freq_hz)); - dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n", - max_vt_div); - - /* - * Find limitsits for sys_clk_div. Not all values are possible - * with all values of pix_clk_div. - */ - min_sys_div = limits->min_vt_sys_clk_div; - dev_dbg(dev, "min_sys_div: %d\n", min_sys_div); - min_sys_div = max(min_sys_div, - DIV_ROUND_UP(min_vt_div, - limits->max_vt_pix_clk_div)); - dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div); - min_sys_div = max(min_sys_div, - pll->pll_op_clk_freq_hz - / limits->max_vt_sys_clk_freq_hz); - dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div); - min_sys_div = clk_div_even_up(min_sys_div); - dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div); - - max_sys_div = limits->max_vt_sys_clk_div; - dev_dbg(dev, "max_sys_div: %d\n", max_sys_div); - max_sys_div = min(max_sys_div, - DIV_ROUND_UP(max_vt_div, - limits->min_vt_pix_clk_div)); - dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div); - max_sys_div = min(max_sys_div, - DIV_ROUND_UP(pll->pll_op_clk_freq_hz, - limits->min_vt_pix_clk_freq_hz)); - dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div); - - /* - * Find pix_div such that a legal pix_div * sys_div results - * into a value which is not smaller than div, the desired - * divisor. - */ - for (vt_div = min_vt_div; vt_div <= max_vt_div; - vt_div += 2 - (vt_div & 1)) { - for (sys_div = min_sys_div; - sys_div <= max_sys_div; - sys_div += 2 - (sys_div & 1)) { - int pix_div = DIV_ROUND_UP(vt_div, sys_div); - - if (pix_div < limits->min_vt_pix_clk_div - || pix_div > limits->max_vt_pix_clk_div) { - dev_dbg(dev, - "pix_div %d too small or too big (%d--%d)\n", - pix_div, - limits->min_vt_pix_clk_div, - limits->max_vt_pix_clk_div); - continue; - } - - /* Check if this one is better. */ - if (pix_div * sys_div - <= roundup(min_vt_div, best_pix_div)) - best_pix_div = pix_div; - } - if (best_pix_div < INT_MAX >> 1) - break; - } - - pll->vt_sys_clk_div = DIV_ROUND_UP(min_vt_div, best_pix_div); - pll->vt_pix_clk_div = best_pix_div; - - pll->vt_sys_clk_freq_hz = - pll->pll_op_clk_freq_hz / pll->vt_sys_clk_div; - pll->vt_pix_clk_freq_hz = - pll->vt_sys_clk_freq_hz / pll->vt_pix_clk_div; - - pll->pixel_rate_csi = - pll->op_pix_clk_freq_hz * lane_op_clock_ratio; - - print_pll(dev, pll); - - rval = bounds_check(dev, pll->pre_pll_clk_div, - limits->min_pre_pll_clk_div, - limits->max_pre_pll_clk_div, "pre_pll_clk_div"); - if (!rval) - rval = bounds_check( - dev, pll->pll_ip_clk_freq_hz, - limits->min_pll_ip_freq_hz, limits->max_pll_ip_freq_hz, - "pll_ip_clk_freq_hz"); - if (!rval) - rval = bounds_check( - dev, pll->pll_multiplier, - limits->min_pll_multiplier, limits->max_pll_multiplier, - "pll_multiplier"); - if (!rval) - rval = bounds_check( - dev, pll->pll_op_clk_freq_hz, - limits->min_pll_op_freq_hz, limits->max_pll_op_freq_hz, - "pll_op_clk_freq_hz"); - if (!rval) - rval = bounds_check( - dev, pll->op_sys_clk_div, - limits->min_op_sys_clk_div, limits->max_op_sys_clk_div, - "op_sys_clk_div"); - if (!rval) - rval = bounds_check( - dev, pll->op_pix_clk_div, - limits->min_op_pix_clk_div, limits->max_op_pix_clk_div, - "op_pix_clk_div"); - if (!rval) - rval = bounds_check( - dev, pll->op_sys_clk_freq_hz, - limits->min_op_sys_clk_freq_hz, - limits->max_op_sys_clk_freq_hz, - "op_sys_clk_freq_hz"); - if (!rval) - rval = bounds_check( - dev, pll->op_pix_clk_freq_hz, - limits->min_op_pix_clk_freq_hz, - limits->max_op_pix_clk_freq_hz, - "op_pix_clk_freq_hz"); - if (!rval) - rval = bounds_check( - dev, pll->vt_sys_clk_freq_hz, - limits->min_vt_sys_clk_freq_hz, - limits->max_vt_sys_clk_freq_hz, - "vt_sys_clk_freq_hz"); - if (!rval) - rval = bounds_check( - dev, pll->vt_pix_clk_freq_hz, - limits->min_vt_pix_clk_freq_hz, - limits->max_vt_pix_clk_freq_hz, - "vt_pix_clk_freq_hz"); - - return rval; -} -EXPORT_SYMBOL_GPL(smiapp_pll_calculate); - -MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>"); -MODULE_DESCRIPTION("Generic SMIA/SMIA++ PLL calculator"); -MODULE_LICENSE("GPL"); |