diff options
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mfd/rohm-bd9576.c | 189 |
3 files changed, 201 insertions, 0 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 7605bed6914e..6e31210915c7 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2001,6 +2001,17 @@ config MFD_ROHM_BD71828 also a single-cell linear charger, a Coulomb counter, a real-time clock (RTC), GPIOs and a 32.768 kHz clock gate. +config MFD_ROHM_BD957XMUF + tristate "ROHM BD9576MUF and BD9573MUF Power Management ICs" + depends on I2C=y + depends on OF + select REGMAP_I2C + select MFD_CORE + help + Select this option to get support for the ROHM BD9576MUF and + BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily + designed to be used to power R-Car series processors. + config MFD_STM32_LPTIMER tristate "Support for STM32 Low-Power Timer" depends on (ARCH_STM32 && OF) || COMPILE_TEST diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 20b7aeb71d38..279b80822147 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -262,6 +262,7 @@ obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o +obj-$(CONFIG_MFD_ROHM_BD957XMUF) += rohm-bd9576.o obj-$(CONFIG_MFD_STMFX) += stmfx.o obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o diff --git a/drivers/mfd/rohm-bd9576.c b/drivers/mfd/rohm-bd9576.c new file mode 100644 index 000000000000..6661a27d69a8 --- /dev/null +++ b/drivers/mfd/rohm-bd9576.c @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2021 ROHM Semiconductors + * + * ROHM BD9576MUF and BD9573MUF PMIC driver + */ + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/rohm-bd957x.h> +#include <linux/mfd/rohm-generic.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/types.h> + +enum { + BD957X_REGULATOR_CELL, + BD957X_WDT_CELL, +}; + +/* + * Due to the BD9576MUF nasty IRQ behaiour we don't always populate IRQs. + * These will be added to regulator resources only if IRQ information for the + * PMIC is populated in device-tree. + */ +static const struct resource bd9576_regulator_irqs[] = { + DEFINE_RES_IRQ_NAMED(BD9576_INT_THERM, "bd9576-temp"), + DEFINE_RES_IRQ_NAMED(BD9576_INT_OVD, "bd9576-ovd"), + DEFINE_RES_IRQ_NAMED(BD9576_INT_UVD, "bd9576-uvd"), +}; + +static struct mfd_cell bd9573_mfd_cells[] = { + [BD957X_REGULATOR_CELL] = { .name = "bd9573-regulator", }, + [BD957X_WDT_CELL] = { .name = "bd9576-wdt", }, +}; + +static struct mfd_cell bd9576_mfd_cells[] = { + [BD957X_REGULATOR_CELL] = { .name = "bd9576-regulator", }, + [BD957X_WDT_CELL] = { .name = "bd9576-wdt", }, +}; + +static const struct regmap_range volatile_ranges[] = { + regmap_reg_range(BD957X_REG_SMRB_ASSERT, BD957X_REG_SMRB_ASSERT), + regmap_reg_range(BD957X_REG_PMIC_INTERNAL_STAT, + BD957X_REG_PMIC_INTERNAL_STAT), + regmap_reg_range(BD957X_REG_INT_THERM_STAT, BD957X_REG_INT_THERM_STAT), + regmap_reg_range(BD957X_REG_INT_OVP_STAT, BD957X_REG_INT_SYS_STAT), + regmap_reg_range(BD957X_REG_INT_MAIN_STAT, BD957X_REG_INT_MAIN_STAT), +}; + +static const struct regmap_access_table volatile_regs = { + .yes_ranges = &volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(volatile_ranges), +}; + +static struct regmap_config bd957x_regmap = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &volatile_regs, + .max_register = BD957X_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; + +static struct regmap_irq bd9576_irqs[] = { + REGMAP_IRQ_REG(BD9576_INT_THERM, 0, BD957X_MASK_INT_MAIN_THERM), + REGMAP_IRQ_REG(BD9576_INT_OVP, 0, BD957X_MASK_INT_MAIN_OVP), + REGMAP_IRQ_REG(BD9576_INT_SCP, 0, BD957X_MASK_INT_MAIN_SCP), + REGMAP_IRQ_REG(BD9576_INT_OCP, 0, BD957X_MASK_INT_MAIN_OCP), + REGMAP_IRQ_REG(BD9576_INT_OVD, 0, BD957X_MASK_INT_MAIN_OVD), + REGMAP_IRQ_REG(BD9576_INT_UVD, 0, BD957X_MASK_INT_MAIN_UVD), + REGMAP_IRQ_REG(BD9576_INT_UVP, 0, BD957X_MASK_INT_MAIN_UVP), + REGMAP_IRQ_REG(BD9576_INT_SYS, 0, BD957X_MASK_INT_MAIN_SYS), +}; + +static struct regmap_irq_chip bd9576_irq_chip = { + .name = "bd9576_irq", + .irqs = &bd9576_irqs[0], + .num_irqs = ARRAY_SIZE(bd9576_irqs), + .status_base = BD957X_REG_INT_MAIN_STAT, + .mask_base = BD957X_REG_INT_MAIN_MASK, + .ack_base = BD957X_REG_INT_MAIN_STAT, + .init_ack_masked = true, + .num_regs = 1, + .irq_reg_stride = 1, +}; + +static int bd957x_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + int ret; + struct regmap *regmap; + struct mfd_cell *cells; + int num_cells; + unsigned long chip_type; + struct irq_domain *domain; + bool usable_irqs; + + chip_type = (unsigned long)of_device_get_match_data(&i2c->dev); + + switch (chip_type) { + case ROHM_CHIP_TYPE_BD9576: + cells = bd9576_mfd_cells; + num_cells = ARRAY_SIZE(bd9576_mfd_cells); + usable_irqs = !!i2c->irq; + break; + case ROHM_CHIP_TYPE_BD9573: + cells = bd9573_mfd_cells; + num_cells = ARRAY_SIZE(bd9573_mfd_cells); + /* + * BD9573 only supports fatal IRQs which we can not handle + * because SoC is going to lose the power. + */ + usable_irqs = false; + break; + default: + dev_err(&i2c->dev, "Unknown device type"); + return -EINVAL; + } + + regmap = devm_regmap_init_i2c(i2c, &bd957x_regmap); + if (IS_ERR(regmap)) { + dev_err(&i2c->dev, "Failed to initialize Regmap\n"); + return PTR_ERR(regmap); + } + + /* + * BD9576 behaves badly. It kepts IRQ line asserted for the whole + * duration of detected HW condition (like over temperature). So we + * don't require IRQ to be populated. + * If IRQ information is not given, then we mask all IRQs and do not + * provide IRQ resources to regulator driver - which then just omits + * the notifiers. + */ + if (usable_irqs) { + struct regmap_irq_chip_data *irq_data; + struct mfd_cell *regulators; + + regulators = &bd9576_mfd_cells[BD957X_REGULATOR_CELL]; + regulators->resources = bd9576_regulator_irqs; + regulators->num_resources = ARRAY_SIZE(bd9576_regulator_irqs); + + ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq, + IRQF_ONESHOT, 0, + &bd9576_irq_chip, &irq_data); + if (ret) { + dev_err(&i2c->dev, "Failed to add IRQ chip\n"); + return ret; + } + domain = regmap_irq_get_domain(irq_data); + } else { + ret = regmap_update_bits(regmap, BD957X_REG_INT_MAIN_MASK, + BD957X_MASK_INT_ALL, + BD957X_MASK_INT_ALL); + if (ret) + return ret; + domain = NULL; + } + + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, cells, + num_cells, NULL, 0, domain); + if (ret) + dev_err(&i2c->dev, "Failed to create subdevices\n"); + + return ret; +} + +static const struct of_device_id bd957x_of_match[] = { + { .compatible = "rohm,bd9576", .data = (void *)ROHM_CHIP_TYPE_BD9576, }, + { .compatible = "rohm,bd9573", .data = (void *)ROHM_CHIP_TYPE_BD9573, }, + { }, +}; +MODULE_DEVICE_TABLE(of, bd957x_of_match); + +static struct i2c_driver bd957x_drv = { + .driver = { + .name = "rohm-bd957x", + .of_match_table = bd957x_of_match, + }, + .probe = &bd957x_i2c_probe, +}; +module_i2c_driver(bd957x_drv); + +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("ROHM BD9576MUF and BD9573MUF Power Management IC driver"); +MODULE_LICENSE("GPL"); |