diff options
Diffstat (limited to 'drivers/mmc/host/dw_mmc.h')
| -rw-r--r-- | drivers/mmc/host/dw_mmc.h | 257 |
1 files changed, 257 insertions, 0 deletions
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index c59465829387..960146106596 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -14,6 +14,263 @@ #ifndef _DW_MMC_H_ #define _DW_MMC_H_ +#include <linux/scatterlist.h> +#include <linux/mmc/core.h> +#include <linux/dmaengine.h> +#include <linux/reset.h> + +#define MAX_MCI_SLOTS 2 + +enum dw_mci_state { + STATE_IDLE = 0, + STATE_SENDING_CMD, + STATE_SENDING_DATA, + STATE_DATA_BUSY, + STATE_SENDING_STOP, + STATE_DATA_ERROR, + STATE_SENDING_CMD11, + STATE_WAITING_CMD11_DONE, +}; + +enum { + EVENT_CMD_COMPLETE = 0, + EVENT_XFER_COMPLETE, + EVENT_DATA_COMPLETE, + EVENT_DATA_ERROR, +}; + +enum dw_mci_cookie { + COOKIE_UNMAPPED, + COOKIE_PRE_MAPPED, /* mapped by pre_req() of dwmmc */ + COOKIE_MAPPED, /* mapped by prepare_data() of dwmmc */ +}; + +struct mmc_data; + +enum { + TRANS_MODE_PIO = 0, + TRANS_MODE_IDMAC, + TRANS_MODE_EDMAC +}; + +struct dw_mci_dma_slave { + struct dma_chan *ch; + enum dma_transfer_direction direction; +}; + +/** + * struct dw_mci - MMC controller state shared between all slots + * @lock: Spinlock protecting the queue and associated data. + * @irq_lock: Spinlock protecting the INTMASK setting. + * @regs: Pointer to MMIO registers. + * @fifo_reg: Pointer to MMIO registers for data FIFO + * @sg: Scatterlist entry currently being processed by PIO code, if any. + * @sg_miter: PIO mapping scatterlist iterator. + * @cur_slot: The slot which is currently using the controller. + * @mrq: The request currently being processed on @cur_slot, + * or NULL if the controller is idle. + * @cmd: The command currently being sent to the card, or NULL. + * @data: The data currently being transferred, or NULL if no data + * transfer is in progress. + * @stop_abort: The command currently prepared for stoping transfer. + * @prev_blksz: The former transfer blksz record. + * @timing: Record of current ios timing. + * @use_dma: Whether DMA channel is initialized or not. + * @using_dma: Whether DMA is in use for the current transfer. + * @dma_64bit_address: Whether DMA supports 64-bit address mode or not. + * @sg_dma: Bus address of DMA buffer. + * @sg_cpu: Virtual address of DMA buffer. + * @dma_ops: Pointer to platform-specific DMA callbacks. + * @cmd_status: Snapshot of SR taken upon completion of the current + * @ring_size: Buffer size for idma descriptors. + * command. Only valid when EVENT_CMD_COMPLETE is pending. + * @dms: structure of slave-dma private data. + * @phy_regs: physical address of controller's register map + * @data_status: Snapshot of SR taken upon completion of the current + * data transfer. Only valid when EVENT_DATA_COMPLETE or + * EVENT_DATA_ERROR is pending. + * @stop_cmdr: Value to be loaded into CMDR when the stop command is + * to be sent. + * @dir_status: Direction of current transfer. + * @tasklet: Tasklet running the request state machine. + * @pending_events: Bitmask of events flagged by the interrupt handler + * to be processed by the tasklet. + * @completed_events: Bitmask of events which the state machine has + * processed. + * @state: Tasklet state. + * @queue: List of slots waiting for access to the controller. + * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus + * rate and timeout calculations. + * @current_speed: Configured rate of the controller. + * @num_slots: Number of slots available. + * @fifoth_val: The value of FIFOTH register. + * @verid: Denote Version ID. + * @dev: Device associated with the MMC controller. + * @pdata: Platform data associated with the MMC controller. + * @drv_data: Driver specific data for identified variant of the controller + * @priv: Implementation defined private data. + * @biu_clk: Pointer to bus interface unit clock instance. + * @ciu_clk: Pointer to card interface unit clock instance. + * @slot: Slots sharing this MMC controller. + * @fifo_depth: depth of FIFO. + * @data_shift: log2 of FIFO item size. + * @part_buf_start: Start index in part_buf. + * @part_buf_count: Bytes of partial data in part_buf. + * @part_buf: Simple buffer for partial fifo reads/writes. + * @push_data: Pointer to FIFO push function. + * @pull_data: Pointer to FIFO pull function. + * @vqmmc_enabled: Status of vqmmc, should be true or false. + * @irq_flags: The flags to be passed to request_irq. + * @irq: The irq value to be passed to request_irq. + * @sdio_id0: Number of slot0 in the SDIO interrupt registers. + * @cmd11_timer: Timer for SD3.0 voltage switch over scheme. + * @dto_timer: Timer for broken data transfer over scheme. + * + * Locking + * ======= + * + * @lock is a softirq-safe spinlock protecting @queue as well as + * @cur_slot, @mrq and @state. These must always be updated + * at the same time while holding @lock. + * + * @irq_lock is an irq-safe spinlock protecting the INTMASK register + * to allow the interrupt handler to modify it directly. Held for only long + * enough to read-modify-write INTMASK and no other locks are grabbed when + * holding this one. + * + * The @mrq field of struct dw_mci_slot is also protected by @lock, + * and must always be written at the same time as the slot is added to + * @queue. + * + * @pending_events and @completed_events are accessed using atomic bit + * operations, so they don't need any locking. + * + * None of the fields touched by the interrupt handler need any + * locking. However, ordering is important: Before EVENT_DATA_ERROR or + * EVENT_DATA_COMPLETE is set in @pending_events, all data-related + * interrupts must be disabled and @data_status updated with a + * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the + * CMDRDY interrupt must be disabled and @cmd_status updated with a + * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the + * bytes_xfered field of @data must be written. This is ensured by + * using barriers. + */ +struct dw_mci { + spinlock_t lock; + spinlock_t irq_lock; + void __iomem *regs; + void __iomem *fifo_reg; + + struct scatterlist *sg; + struct sg_mapping_iter sg_miter; + + struct dw_mci_slot *cur_slot; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + struct mmc_command stop_abort; + unsigned int prev_blksz; + unsigned char timing; + + /* DMA interface members*/ + int use_dma; + int using_dma; + int dma_64bit_address; + + dma_addr_t sg_dma; + void *sg_cpu; + const struct dw_mci_dma_ops *dma_ops; + /* For idmac */ + unsigned int ring_size; + + /* For edmac */ + struct dw_mci_dma_slave *dms; + /* Registers's physical base address */ + resource_size_t phy_regs; + + u32 cmd_status; + u32 data_status; + u32 stop_cmdr; + u32 dir_status; + struct tasklet_struct tasklet; + unsigned long pending_events; + unsigned long completed_events; + enum dw_mci_state state; + struct list_head queue; + + u32 bus_hz; + u32 current_speed; + u32 num_slots; + u32 fifoth_val; + u16 verid; + struct device *dev; + struct dw_mci_board *pdata; + const struct dw_mci_drv_data *drv_data; + void *priv; + struct clk *biu_clk; + struct clk *ciu_clk; + struct dw_mci_slot *slot[MAX_MCI_SLOTS]; + + /* FIFO push and pull */ + int fifo_depth; + int data_shift; + u8 part_buf_start; + u8 part_buf_count; + union { + u16 part_buf16; + u32 part_buf32; + u64 part_buf; + }; + void (*push_data)(struct dw_mci *host, void *buf, int cnt); + void (*pull_data)(struct dw_mci *host, void *buf, int cnt); + + bool vqmmc_enabled; + unsigned long irq_flags; /* IRQ flags */ + int irq; + + int sdio_id0; + + struct timer_list cmd11_timer; + struct timer_list dto_timer; +}; + +/* DMA ops for Internal/External DMAC interface */ +struct dw_mci_dma_ops { + /* DMA Ops */ + int (*init)(struct dw_mci *host); + int (*start)(struct dw_mci *host, unsigned int sg_len); + void (*complete)(void *host); + void (*stop)(struct dw_mci *host); + void (*cleanup)(struct dw_mci *host); + void (*exit)(struct dw_mci *host); +}; + +struct dma_pdata; + +/* Board platform data */ +struct dw_mci_board { + u32 num_slots; + + unsigned int bus_hz; /* Clock speed at the cclk_in pad */ + + u32 caps; /* Capabilities */ + u32 caps2; /* More capabilities */ + u32 pm_caps; /* PM capabilities */ + /* + * Override fifo depth. If 0, autodetect it from the FIFOTH register, + * but note that this may not be reliable after a bootloader has used + * it. + */ + unsigned int fifo_depth; + + /* delay in mS before detecting cards after interrupt */ + u32 detect_delay_ms; + + struct reset_control *rstc; + struct dw_mci_dma_ops *dma_ops; + struct dma_pdata *data; +}; + #define DW_MMC_240A 0x240a #define DW_MMC_280A 0x280a |