diff options
Diffstat (limited to 'drivers/mtd')
48 files changed, 3324 insertions, 2185 deletions
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index e7b2e439696c..b833e6cc684c 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -67,16 +67,40 @@ module_param(reliable_mode, uint, 0); MODULE_PARM_DESC(reliable_mode, "Set the docg3 mode (0=normal MLC, 1=fast, " "2=reliable) : MLC normal operations are in normal mode"); -/** - * struct docg3_oobinfo - DiskOnChip G3 OOB layout - * @eccbytes: 8 bytes are used (1 for Hamming ECC, 7 for BCH ECC) - * @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC) - * @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15 - */ -static struct nand_ecclayout docg3_oobinfo = { - .eccbytes = 8, - .eccpos = {7, 8, 9, 10, 11, 12, 13, 14}, - .oobfree = {{0, 7}, {15, 1} }, +static int docg3_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + /* byte 7 is Hamming ECC, byte 8-14 are BCH ECC */ + oobregion->offset = 7; + oobregion->length = 8; + + return 0; +} + +static int docg3_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 1) + return -ERANGE; + + /* free bytes: byte 0 until byte 6, byte 15 */ + if (!section) { + oobregion->offset = 0; + oobregion->length = 7; + } else { + oobregion->offset = 15; + oobregion->length = 1; + } + + return 0; +} + +static const struct mtd_ooblayout_ops nand_ooblayout_docg3_ops = { + .ecc = docg3_ooblayout_ecc, + .free = docg3_ooblayout_free, }; static inline u8 doc_readb(struct docg3 *docg3, u16 reg) @@ -1857,7 +1881,7 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) mtd->_read_oob = doc_read_oob; mtd->_write_oob = doc_write_oob; mtd->_block_isbad = doc_block_isbad; - mtd->ecclayout = &docg3_oobinfo; + mtd_set_ooblayout(mtd, &nand_ooblayout_docg3_ops); mtd->oobavail = 8; mtd->ecc_strength = DOC_ECC_BCH_T; diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 6d19835b80a9..2a47a3f0e730 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -465,35 +465,108 @@ static int mtdchar_readoob(struct file *file, struct mtd_info *mtd, } /* - * Copies (and truncates, if necessary) data from the larger struct, - * nand_ecclayout, to the smaller, deprecated layout struct, - * nand_ecclayout_user. This is necessary only to support the deprecated - * API ioctl ECCGETLAYOUT while allowing all new functionality to use - * nand_ecclayout flexibly (i.e. the struct may change size in new - * releases without requiring major rewrites). + * Copies (and truncates, if necessary) OOB layout information to the + * deprecated layout struct, nand_ecclayout_user. This is necessary only to + * support the deprecated API ioctl ECCGETLAYOUT while allowing all new + * functionality to use mtd_ooblayout_ops flexibly (i.e. mtd_ooblayout_ops + * can describe any kind of OOB layout with almost zero overhead from a + * memory usage point of view). */ -static int shrink_ecclayout(const struct nand_ecclayout *from, - struct nand_ecclayout_user *to) +static int shrink_ecclayout(struct mtd_info *mtd, + struct nand_ecclayout_user *to) { - int i; + struct mtd_oob_region oobregion; + int i, section = 0, ret; - if (!from || !to) + if (!mtd || !to) return -EINVAL; memset(to, 0, sizeof(*to)); - to->eccbytes = min((int)from->eccbytes, MTD_MAX_ECCPOS_ENTRIES); - for (i = 0; i < to->eccbytes; i++) - to->eccpos[i] = from->eccpos[i]; + to->eccbytes = 0; + for (i = 0; i < MTD_MAX_ECCPOS_ENTRIES;) { + u32 eccpos; + + ret = mtd_ooblayout_ecc(mtd, section, &oobregion); + if (ret < 0) { + if (ret != -ERANGE) + return ret; + + break; + } + + eccpos = oobregion.offset; + for (; i < MTD_MAX_ECCPOS_ENTRIES && + eccpos < oobregion.offset + oobregion.length; i++) { + to->eccpos[i] = eccpos++; + to->eccbytes++; + } + } for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES; i++) { - if (from->oobfree[i].length == 0 && - from->oobfree[i].offset == 0) + ret = mtd_ooblayout_free(mtd, i, &oobregion); + if (ret < 0) { + if (ret != -ERANGE) + return ret; + + break; + } + + to->oobfree[i].offset = oobregion.offset; + to->oobfree[i].length = oobregion.length; + to->oobavail += to->oobfree[i].length; + } + + return 0; +} + +static int get_oobinfo(struct mtd_info *mtd, struct nand_oobinfo *to) +{ + struct mtd_oob_region oobregion; + int i, section = 0, ret; + + if (!mtd || !to) + return -EINVAL; + + memset(to, 0, sizeof(*to)); + + to->eccbytes = 0; + for (i = 0; i < ARRAY_SIZE(to->eccpos);) { + u32 eccpos; + + ret = mtd_ooblayout_ecc(mtd, section, &oobregion); + if (ret < 0) { + if (ret != -ERANGE) + return ret; + break; - to->oobavail += from->oobfree[i].length; - to->oobfree[i] = from->oobfree[i]; + } + + if (oobregion.length + i > ARRAY_SIZE(to->eccpos)) + return -EINVAL; + + eccpos = oobregion.offset; + for (; eccpos < oobregion.offset + oobregion.length; i++) { + to->eccpos[i] = eccpos++; + to->eccbytes++; + } } + for (i = 0; i < 8; i++) { + ret = mtd_ooblayout_free(mtd, i, &oobregion); + if (ret < 0) { + if (ret != -ERANGE) + return ret; + + break; + } + + to->oobfree[i][0] = oobregion.offset; + to->oobfree[i][1] = oobregion.length; + } + + to->useecc = MTD_NANDECC_AUTOPLACE; + return 0; } @@ -815,16 +888,12 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg) { struct nand_oobinfo oi; - if (!mtd->ecclayout) + if (!mtd->ooblayout) return -EOPNOTSUPP; - if (mtd->ecclayout->eccbytes > ARRAY_SIZE(oi.eccpos)) - return -EINVAL; - oi.useecc = MTD_NANDECC_AUTOPLACE; - memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos)); - memcpy(&oi.oobfree, mtd->ecclayout->oobfree, - sizeof(oi.oobfree)); - oi.eccbytes = mtd->ecclayout->eccbytes; + ret = get_oobinfo(mtd, &oi); + if (ret) + return ret; if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo))) return -EFAULT; @@ -913,14 +982,14 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg) { struct nand_ecclayout_user *usrlay; - if (!mtd->ecclayout) + if (!mtd->ooblayout) return -EOPNOTSUPP; usrlay = kmalloc(sizeof(*usrlay), GFP_KERNEL); if (!usrlay) return -ENOMEM; - shrink_ecclayout(mtd->ecclayout, usrlay); + shrink_ecclayout(mtd, usrlay); if (copy_to_user(argp, usrlay, sizeof(*usrlay))) ret = -EFAULT; diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index 239a8c806b67..d573606b91c2 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -777,7 +777,7 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c } - concat->mtd.ecclayout = subdev[0]->ecclayout; + mtd_set_ooblayout(&concat->mtd, subdev[0]->ooblayout); concat->num_subdev = num_devs; concat->mtd.name = name; diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 309625130b21..e3936b847c6b 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -40,6 +40,7 @@ #include <linux/slab.h> #include <linux/reboot.h> #include <linux/kconfig.h> +#include <linux/leds.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -862,6 +863,7 @@ int mtd_erase(struct mtd_info *mtd, struct erase_info *instr) mtd_erase_callback(instr); return 0; } + ledtrig_mtd_activity(); return mtd->_erase(mtd, instr); } EXPORT_SYMBOL_GPL(mtd_erase); @@ -925,6 +927,7 @@ int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, if (!len) return 0; + ledtrig_mtd_activity(); /* * In the absence of an error, drivers return a non-negative integer * representing the maximum number of bitflips that were corrected on @@ -949,6 +952,7 @@ int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, return -EROFS; if (!len) return 0; + ledtrig_mtd_activity(); return mtd->_write(mtd, to, len, retlen, buf); } EXPORT_SYMBOL_GPL(mtd_write); @@ -982,6 +986,8 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) ops->retlen = ops->oobretlen = 0; if (!mtd->_read_oob) return -EOPNOTSUPP; + + ledtrig_mtd_activity(); /* * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics * similar to mtd->_read(), returning a non-negative integer @@ -997,6 +1003,379 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) } EXPORT_SYMBOL_GPL(mtd_read_oob); +int mtd_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + ops->retlen = ops->oobretlen = 0; + if (!mtd->_write_oob) + return -EOPNOTSUPP; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + ledtrig_mtd_activity(); + return mtd->_write_oob(mtd, to, ops); +} +EXPORT_SYMBOL_GPL(mtd_write_oob); + +/** + * mtd_ooblayout_ecc - Get the OOB region definition of a specific ECC section + * @mtd: MTD device structure + * @section: ECC section. Depending on the layout you may have all the ECC + * bytes stored in a single contiguous section, or one section + * per ECC chunk (and sometime several sections for a single ECC + * ECC chunk) + * @oobecc: OOB region struct filled with the appropriate ECC position + * information + * + * This functions return ECC section information in the OOB area. I you want + * to get all the ECC bytes information, then you should call + * mtd_ooblayout_ecc(mtd, section++, oobecc) until it returns -ERANGE. + * + * Returns zero on success, a negative error code otherwise. + */ +int mtd_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobecc) +{ + memset(oobecc, 0, sizeof(*oobecc)); + + if (!mtd || section < 0) + return -EINVAL; + + if (!mtd->ooblayout || !mtd->ooblayout->ecc) + return -ENOTSUPP; + + return mtd->ooblayout->ecc(mtd, section, oobecc); +} +EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc); + +/** + * mtd_ooblayout_free - Get the OOB region definition of a specific free + * section + * @mtd: MTD device structure + * @section: Free section you are interested in. Depending on the layout + * you may have all the free bytes stored in a single contiguous + * section, or one section per ECC chunk plus an extra section + * for the remaining bytes (or other funky layout). + * @oobfree: OOB region struct filled with the appropriate free position + * information + * + * This functions return free bytes position in the OOB area. I you want + * to get all the free bytes information, then you should call + * mtd_ooblayout_free(mtd, section++, oobfree) until it returns -ERANGE. + * + * Returns zero on success, a negative error code otherwise. + */ +int mtd_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobfree) +{ + memset(oobfree, 0, sizeof(*oobfree)); + + if (!mtd || section < 0) + return -EINVAL; + + if (!mtd->ooblayout || !mtd->ooblayout->free) + return -ENOTSUPP; + + return mtd->ooblayout->free(mtd, section, oobfree); +} +EXPORT_SYMBOL_GPL(mtd_ooblayout_free); + +/** + * mtd_ooblayout_find_region - Find the region attached to a specific byte + * @mtd: mtd info structure + * @byte: the byte we are searching for + * @sectionp: pointer where the section id will be stored + * @oobregion: used to retrieve the ECC position + * @iter: iterator function. Should be either mtd_ooblayout_free or + * mtd_ooblayout_ecc depending on the region type you're searching for + * + * This functions returns the section id and oobregion information of a + * specific byte. For example, say you want to know where the 4th ECC byte is + * stored, you'll use: + * + * mtd_ooblayout_find_region(mtd, 3, §ion, &oobregion, mtd_ooblayout_ecc); + * + * Returns zero on success, a negative error code otherwise. + */ +static int mtd_ooblayout_find_region(struct mtd_info *mtd, int byte, + int *sectionp, struct mtd_oob_region *oobregion, + int (*iter)(struct mtd_info *, + int section, + struct mtd_oob_region *oobregion)) +{ + int pos = 0, ret, section = 0; + + memset(oobregion, 0, sizeof(*oobregion)); + + while (1) { + ret = iter(mtd, section, oobregion); + if (ret) + return ret; + + if (pos + oobregion->length > byte) + break; + + pos += oobregion->length; + section++; + } + + /* + * Adjust region info to make it start at the beginning at the + * 'start' ECC byte. + */ + oobregion->offset += byte - pos; + oobregion->length -= byte - pos; + *sectionp = section; + + return 0; +} + +/** + * mtd_ooblayout_find_eccregion - Find the ECC region attached to a specific + * ECC byte + * @mtd: mtd info structure + * @eccbyte: the byte we are searching for + * @sectionp: pointer where the section id will be stored + * @oobregion: OOB region information + * + * Works like mtd_ooblayout_find_region() except it searches for a specific ECC + * byte. + * + * Returns zero on success, a negative error code otherwise. + */ +int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte, + int *section, + struct mtd_oob_region *oobregion) +{ + return mtd_ooblayout_find_region(mtd, eccbyte, section, oobregion, + mtd_ooblayout_ecc); +} +EXPORT_SYMBOL_GPL(mtd_ooblayout_find_eccregion); + +/** + * mtd_ooblayout_get_bytes - Extract OOB bytes from the oob buffer + * @mtd: mtd info structure + * @buf: destination buffer to store OOB bytes + * @oobbuf: OOB buffer + * @start: first byte to retrieve + * @nbytes: number of bytes to retrieve + * @iter: section iterator + * + * Extract bytes attached to a specific category (ECC or free) + * from the OOB buffer and copy them into buf. + * + * Returns zero on success, a negative error code otherwise. + */ +static int mtd_ooblayout_get_bytes(struct mtd_info *mtd, u8 *buf, + const u8 *oobbuf, int start, int nbytes, + int (*iter)(struct mtd_info *, + int section, + struct mtd_oob_region *oobregion)) +{ + struct mtd_oob_region oobregion = { }; + int section = 0, ret; + + ret = mtd_ooblayout_find_region(mtd, start, §ion, + &oobregion, iter); + + while (!ret) { + int cnt; + + cnt = oobregion.length > nbytes ? nbytes : oobregion.length; + memcpy(buf, oobbuf + oobregion.offset, cnt); + buf += cnt; + nbytes -= cnt; + + if (!nbytes) + break; + + ret = iter(mtd, ++section, &oobregion); + } + + return ret; +} + +/** + * mtd_ooblayout_set_bytes - put OOB bytes into the oob buffer + * @mtd: mtd info structure + * @buf: source buffer to get OOB bytes from + * @oobbuf: OOB buffer + * @start: first OOB byte to set + * @nbytes: number of OOB bytes to set + * @iter: section iterator + * + * Fill the OOB buffer with data provided in buf. The category (ECC or free) + * is selected by passing the appropriate iterator. + * + * Returns zero on success, a negative error code otherwise. + */ +static int mtd_ooblayout_set_bytes(struct mtd_info *mtd, const u8 *buf, + u8 *oobbuf, int start, int nbytes, + int (*iter)(struct mtd_info *, + int section, + struct mtd_oob_region *oobregion)) +{ + struct mtd_oob_region oobregion = { }; + int section = 0, ret; + + ret = mtd_ooblayout_find_region(mtd, start, §ion, + &oobregion, iter); + + while (!ret) { + int cnt; + + cnt = oobregion.length > nbytes ? nbytes : oobregion.length; + memcpy(oobbuf + oobregion.offset, buf, cnt); + buf += cnt; + nbytes -= cnt; + + if (!nbytes) + break; + + ret = iter(mtd, ++section, &oobregion); + } + + return ret; +} + +/** + * mtd_ooblayout_count_bytes - count the number of bytes in a OOB category + * @mtd: mtd info structure + * @iter: category iterator + * + * Count the number of bytes in a given category. + * + * Returns a positive value on success, a negative error code otherwise. + */ +static int mtd_ooblayout_count_bytes(struct mtd_info *mtd, + int (*iter)(struct mtd_info *, + int section, + struct mtd_oob_region *oobregion)) +{ + struct mtd_oob_region oobregion = { }; + int section = 0, ret, nbytes = 0; + + while (1) { + ret = iter(mtd, section++, &oobregion); + if (ret) { + if (ret == -ERANGE) + ret = nbytes; + break; + } + + nbytes += oobregion.length; + } + + return ret; +} + +/** + * mtd_ooblayout_get_eccbytes - extract ECC bytes from the oob buffer + * @mtd: mtd info structure + * @eccbuf: destination buffer to store ECC bytes + * @oobbuf: OOB buffer + * @start: first ECC byte to retrieve + * @nbytes: number of ECC bytes to retrieve + * + * Works like mtd_ooblayout_get_bytes(), except it acts on ECC bytes. + * + * Returns zero on success, a negative error code otherwise. + */ +int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf, + const u8 *oobbuf, int start, int nbytes) +{ + return mtd_ooblayout_get_bytes(mtd, eccbuf, oobbuf, start, nbytes, + mtd_ooblayout_ecc); +} +EXPORT_SYMBOL_GPL(mtd_ooblayout_get_eccbytes); + +/** + * mtd_ooblayout_set_eccbytes - set ECC bytes into the oob buffer + * @mtd: mtd info structure + * @eccbuf: source buffer to get ECC bytes from + * @oobbuf: OOB buffer + * @start: first ECC byte to set + * @nbytes: number of ECC bytes to set + * + * Works like mtd_ooblayout_set_bytes(), except it acts on ECC bytes. + * + * Returns zero on success, a negative error code otherwise. + */ +int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf, + u8 *oobbuf, int start, int nbytes) +{ + return mtd_ooblayout_set_bytes(mtd, eccbuf, oobbuf, start, nbytes, + mtd_ooblayout_ecc); +} +EXPORT_SYMBOL_GPL(mtd_ooblayout_set_eccbytes); + +/** + * mtd_ooblayout_get_databytes - extract data bytes from the oob buffer + * @mtd: mtd info structure + * @databuf: destination buffer to store ECC bytes + * @oobbuf: OOB buffer + * @start: first ECC byte to retrieve + * @nbytes: number of ECC bytes to retrieve + * + * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes. + * + * Returns zero on success, a negative error code otherwise. + */ +int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf, + const u8 *oobbuf, int start, int nbytes) +{ + return mtd_ooblayout_get_bytes(mtd, databuf, oobbuf, start, nbytes, + mtd_ooblayout_free); +} +EXPORT_SYMBOL_GPL(mtd_ooblayout_get_databytes); + +/** + * mtd_ooblayout_get_eccbytes - set data bytes into the oob buffer + * @mtd: mtd info structure + * @eccbuf: source buffer to get data bytes from + * @oobbuf: OOB buffer + * @start: first ECC byte to set + * @nbytes: number of ECC bytes to set + * + * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes. + * + * Returns zero on success, a negative error code otherwise. + */ +int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf, + u8 *oobbuf, int start, int nbytes) +{ + return mtd_ooblayout_set_bytes(mtd, databuf, oobbuf, start, nbytes, + mtd_ooblayout_free); +} +EXPORT_SYMBOL_GPL(mtd_ooblayout_set_databytes); + +/** + * mtd_ooblayout_count_freebytes - count the number of free bytes in OOB + * @mtd: mtd info structure + * + * Works like mtd_ooblayout_count_bytes(), except it count free bytes. + * + * Returns zero on success, a negative error code otherwise. + */ +int mtd_ooblayout_count_freebytes(struct mtd_info *mtd) +{ + return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_free); +} +EXPORT_SYMBOL_GPL(mtd_ooblayout_count_freebytes); + +/** + * mtd_ooblayout_count_freebytes - count the number of ECC bytes in OOB + * @mtd: mtd info structure + * + * Works like mtd_ooblayout_count_bytes(), except it count ECC bytes. + * + * Returns zero on success, a negative error code otherwise. + */ +int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd) +{ + return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_ecc); +} +EXPORT_SYMBOL_GPL(mtd_ooblayout_count_eccbytes); + /* * Method to access the protection register area, present in some flash * devices. The user data is one time programmable but the factory data is read diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 08de4b2cf0f5..1f13e32556f8 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -317,6 +317,27 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs) return res; } +static int part_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct mtd_part *part = mtd_to_part(mtd); + + return mtd_ooblayout_ecc(part->master, section, oobregion); +} + +static int part_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct mtd_part *part = mtd_to_part(mtd); + + return mtd_ooblayout_free(part->master, section, oobregion); +} + +static const struct mtd_ooblayout_ops part_ooblayout_ops = { + .ecc = part_ooblayout_ecc, + .free = part_ooblayout_free, +}; + static inline void free_partition(struct mtd_part *p) { kfree(p->mtd.name); @@ -533,7 +554,7 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, part->name); } - slave->mtd.ecclayout = master->ecclayout; + mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops); slave->mtd.ecc_step_size = master->ecc_step_size; slave->mtd.ecc_strength = master->ecc_strength; slave->mtd.bitflip_threshold = master->bitflip_threshold; diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 68b58c85789c..78e12cc8bac2 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -224,6 +224,7 @@ static int ams_delta_init(struct platform_device *pdev) /* 25 us command delay time */ this->chip_delay = 30; this->ecc.mode = NAND_ECC_SOFT; + this->ecc.algo = NAND_ECC_HAMMING; platform_set_drvdata(pdev, io_base); diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 20cbaabb2959..efc8ea250c1d 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -36,7 +36,6 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_gpio.h> -#include <linux/of_mtd.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -72,30 +71,44 @@ struct atmel_nand_nfc_caps { uint32_t rb_mask; }; -/* oob layout for large page size +/* + * oob layout for large page size * bad block info is on bytes 0 and 1 * the bytes have to be consecutives to avoid * several NAND_CMD_RNDOUT during read - */ -static struct nand_ecclayout atmel_oobinfo_large = { - .eccbytes = 4, - .eccpos = {60, 61, 62, 63}, - .oobfree = { - {2, 58} - }, -}; - -/* oob layout for small page size + * + * oob layout for small page size * bad block info is on bytes 4 and 5 * the bytes have to be consecutives to avoid * several NAND_CMD_RNDOUT during read */ -static struct nand_ecclayout atmel_oobinfo_small = { - .eccbytes = 4, - .eccpos = {0, 1, 2, 3}, - .oobfree = { - {6, 10} - }, +static int atmel_ooblayout_ecc_sp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->length = 4; + oobregion->offset = 0; + + return 0; +} + +static int atmel_ooblayout_free_sp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 6; + oobregion->length = mtd->oobsize - oobregion->offset; + + return 0; +} + +static const struct mtd_ooblayout_ops atmel_ooblayout_sp_ops = { + .ecc = atmel_ooblayout_ecc_sp, + .free = atmel_ooblayout_free_sp, }; struct atmel_nfc { @@ -163,8 +176,6 @@ struct atmel_nand_host { int *pmecc_delta; }; -static struct nand_ecclayout atmel_pmecc_oobinfo; - /* * Enable NAND. */ @@ -434,14 +445,13 @@ err_buf: static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len) { struct nand_chip *chip = mtd_to_nand(mtd); - struct atmel_nand_host *host = nand_get_controller_data(chip); if (use_dma && len > mtd->oobsize) /* only use DMA for bigger than oob size: better performances */ if (atmel_nand_dma_op(mtd, buf, len, 1) == 0) return; - if (host->board.bus_width_16) + if (chip->options & NAND_BUSWIDTH_16) atmel_read_buf16(mtd, buf, len); else atmel_read_buf8(mtd, buf, len); @@ -450,14 +460,13 @@ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len) static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len) { struct nand_chip *chip = mtd_to_nand(mtd); - struct atmel_nand_host *host = nand_get_controller_data(chip); if (use_dma && len > mtd->oobsize) /* only use DMA for bigger than oob size: better performances */ if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0) return; - if (host->board.bus_width_16) + if (chip->options & NAND_BUSWIDTH_16) atmel_write_buf16(mtd, buf, len); else atmel_write_buf8(mtd, buf, len); @@ -483,22 +492,6 @@ static int pmecc_get_ecc_bytes(int cap, int sector_size) return (m * cap + 7) / 8; } -static void pmecc_config_ecc_layout(struct nand_ecclayout *layout, - int oobsize, int ecc_len) -{ - int i; - - layout->eccbytes = ecc_len; - - /* ECC will occupy the last ecc_len bytes continuously */ - for (i = 0; i < ecc_len; i++) - layout->eccpos[i] = oobsize - ecc_len + i; - - layout->oobfree[0].offset = PMECC_OOB_RESERVED_BYTES; - layout->oobfree[0].length = - oobsize - ecc_len - layout->oobfree[0].offset; -} - static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host) { int table_size; @@ -836,13 +829,16 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", pos, bit_pos, err_byte, *(buf + byte_pos)); } else { + struct mtd_oob_region oobregion; + /* Bit flip in OOB area */ tmp = sector_num * nand_chip->ecc.bytes + (byte_pos - sector_size); err_byte = ecc[tmp]; ecc[tmp] ^= (1 << bit_pos); - pos = tmp + nand_chip->ecc.layout->eccpos[0]; + mtd_ooblayout_ecc(mtd, 0, &oobregion); + pos = tmp + oobregion.offset; dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", pos, bit_pos, err_byte, ecc[tmp]); } @@ -863,17 +859,6 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf, uint8_t *buf_pos; int max_bitflips = 0; - /* If can correct bitfilps from erased page, do the normal check */ - if (host->caps->pmecc_correct_erase_page) - goto normal_check; - - for (i = 0; i < nand_chip->ecc.total; i++) - if (ecc[i] != 0xff) - goto normal_check; - /* Erased page, return OK */ - return 0; - -normal_check: for (i = 0; i < nand_chip->ecc.steps; i++) { err_nbr = 0; if (pmecc_stat & 0x1) { @@ -884,16 +869,30 @@ normal_check: pmecc_get_sigma(mtd); err_nbr = pmecc_err_location(mtd); - if (err_nbr == -1) { + if (err_nbr >= 0) { + pmecc_correct_data(mtd, buf_pos, ecc, i, + nand_chip->ecc.bytes, + err_nbr); + } else if (!host->caps->pmecc_correct_erase_page) { + u8 *ecc_pos = ecc + (i * nand_chip->ecc.bytes); + + /* Try to detect erased pages */ + err_nbr = nand_check_erased_ecc_chunk(buf_pos, + host->pmecc_sector_size, + ecc_pos, + nand_chip->ecc.bytes, + NULL, 0, + nand_chip->ecc.strength); + } + + if (err_nbr < 0) { dev_err(host->dev, "PMECC: Too many errors\n"); mtd->ecc_stats.failed++; return -EIO; - } else { - pmecc_correct_data(mtd, buf_pos, ecc, i, - nand_chip->ecc.bytes, err_nbr); - mtd->ecc_stats.corrected += err_nbr; - max_bitflips = max_t(int, max_bitflips, err_nbr); } + + mtd->ecc_stats.corrected += err_nbr; + max_bitflips = max_t(int, max_bitflips, err_nbr); } pmecc_stat >>= 1; } @@ -931,7 +930,6 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, struct atmel_nand_host *host = nand_get_controller_data(chip); int eccsize = chip->ecc.size * chip->ecc.steps; uint8_t *oob = chip->oob_poi; - uint32_t *eccpos = chip->ecc.layout->eccpos; uint32_t stat; unsigned long end_time; int bitflips = 0; @@ -953,7 +951,11 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, stat = pmecc_readl_relaxed(host->ecc, ISR); if (stat != 0) { - bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]); + struct mtd_oob_region oobregion; + + mtd_ooblayout_ecc(mtd, 0, &oobregion); + bitflips = pmecc_correction(mtd, stat, buf, + &oob[oobregion.offset]); if (bitflips < 0) /* uncorrectable errors */ return 0; @@ -967,8 +969,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, int page) { struct atmel_nand_host *host = nand_get_controller_data(chip); - uint32_t *eccpos = chip->ecc.layout->eccpos; - int i, j; + struct mtd_oob_region oobregion = { }; + int i, j, section = 0; unsigned long end_time; if (!host->nfc || !host->nfc->write_by_sram) { @@ -987,11 +989,14 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, for (i = 0; i < chip->ecc.steps; i++) { for (j = 0; j < chip->ecc.bytes; j++) { - int pos; + if (!oobregion.length) + mtd_ooblayout_ecc(mtd, section, &oobregion); - pos = i * chip->ecc.bytes + j; - chip->oob_poi[eccpos[pos]] = + chip->oob_poi[oobregion.offset] = pmecc_readb_ecc_relaxed(host->ecc, i, j); + oobregion.length--; + oobregion.offset++; + section++; } } chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -1003,8 +1008,9 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_get_controller_data(nand_chip); + int eccbytes = mtd_ooblayout_count_eccbytes(mtd); uint32_t val = 0; - struct nand_ecclayout *ecc_layout; + struct mtd_oob_region oobregion; pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST); pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); @@ -1054,11 +1060,11 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) | PMECC_CFG_AUTO_DISABLE); pmecc_writel(host->ecc, CFG, val); - ecc_layout = nand_chip->ecc.layout; pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1); - pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]); + mtd_ooblayout_ecc(mtd, 0, &oobregion); + pmecc_writel(host->ecc, SADDR, oobregion.offset); pmecc_writel(host->ecc, EADDR, - ecc_layout->eccpos[ecc_layout->eccbytes - 1]); + oobregion.offset + eccbytes - 1); /* See datasheet about PMECC Clock Control Register */ pmecc_writel(host->ecc, CLK, 2); pmecc_writel(host->ecc, IDR, 0xff); @@ -1206,6 +1212,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev, dev_warn(host->dev, "Can't get I/O resource regs for PMECC controller, rolling back on software ECC\n"); nand_chip->ecc.mode = NAND_ECC_SOFT; + nand_chip->ecc.algo = NAND_ECC_HAMMING; return 0; } @@ -1280,11 +1287,8 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev, err_no = -EINVAL; goto err; } - pmecc_config_ecc_layout(&atmel_pmecc_oobinfo, - mtd->oobsize, - nand_chip->ecc.total); - nand_chip->ecc.layout = &atmel_pmecc_oobinfo; + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); break; default: dev_warn(host->dev, @@ -1292,6 +1296,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev, /* page size not handled by HW ECC */ /* switching back to soft ECC */ nand_chip->ecc.mode = NAND_ECC_SOFT; + nand_chip->ecc.algo = NAND_ECC_HAMMING; return 0; } @@ -1359,12 +1364,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, { int eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; - uint32_t *eccpos = chip->ecc.layout->eccpos; uint8_t *p = buf; uint8_t *oob = chip->oob_poi; uint8_t *ecc_pos; int stat; unsigned int max_bitflips = 0; + struct mtd_oob_region oobregion = {}; /* * Errata: ALE is incorrectly wired up to the ECC controller @@ -1382,19 +1387,20 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, chip->read_buf(mtd, p, eccsize); /* move to ECC position if needed */ - if (eccpos[0] != 0) { - /* This only works on large pages - * because the ECC controller waits for - * NAND_CMD_RNDOUTSTART after the - * NAND_CMD_RNDOUT. - * anyway, for small pages, the eccpos[0] == 0 + mtd_ooblayout_ecc(mtd, 0, &oobregion); + if (oobregion.offset != 0) { + /* + * This only works on large pages because the ECC controller + * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT. + * Anyway, for small pages, the first ECC byte is at offset + * 0 in the OOB area. */ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, - mtd->writesize + eccpos[0], -1); + mtd->writesize + oobregion.offset, -1); } /* the ECC controller needs to read the ECC just after the data */ - ecc_pos = oob + eccpos[0]; + ecc_pos = oob + oobregion.offset; chip->read_buf(mtd, ecc_pos, eccbytes); /* check if there's an error */ @@ -1504,58 +1510,17 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) ecc_writel(host->ecc, CR, ATMEL_ECC_RST); } -static int atmel_of_init_port(struct atmel_nand_host *host, - struct device_node *np) +static int atmel_of_init_ecc(struct atmel_nand_host *host, + struct device_node *np) { - u32 val; u32 offset[2]; - int ecc_mode; - struct atmel_nand_data *board = &host->board; - enum of_gpio_flags flags = 0; - - host->caps = (struct atmel_nand_caps *) - of_device_get_match_data(host->dev); - - if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) { - if (val >= 32) { - dev_err(host->dev, "invalid addr-offset %u\n", val); - return -EINVAL; - } - board->ale = val; - } - - if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) { - if (val >= 32) { - dev_err(host->dev, "invalid cmd-offset %u\n", val); - return -EINVAL; - } - board->cle = val; - } - - ecc_mode = of_get_nand_ecc_mode(np); - - board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode; - - board->on_flash_bbt = of_get_nand_on_flash_bbt(np); - - board->has_dma = of_property_read_bool(np, "atmel,nand-has-dma"); - - if (of_get_nand_bus_width(np) == 16) - board->bus_width_16 = 1; - - board->rdy_pin = of_get_gpio_flags(np, 0, &flags); - board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW); - - board->enable_pin = of_get_gpio(np, 1); - board->det_pin = of_get_gpio(np, 2); + u32 val; host->has_pmecc = of_property_read_bool(np, "atmel,has-pmecc"); - /* load the nfc driver if there is */ - of_platform_populate(np, NULL, NULL, host->dev); - - if (!(board->ecc_mode == NAND_ECC_HW) || !host->has_pmecc) - return 0; /* Not using PMECC */ + /* Not using PMECC */ + if (!(host->nand_chip.ecc.mode == NAND_ECC_HW) || !host->has_pmecc) + return 0; /* use PMECC, get correction capability, sector size and lookup * table offset. @@ -1596,16 +1561,65 @@ static int atmel_of_init_port(struct atmel_nand_host *host, /* Will build a lookup table and initialize the offset later */ return 0; } + if (!offset[0] && !offset[1]) { dev_err(host->dev, "Invalid PMECC lookup table offset\n"); return -EINVAL; } + host->pmecc_lookup_table_offset_512 = offset[0]; host->pmecc_lookup_table_offset_1024 = offset[1]; return 0; } +static int atmel_of_init_port(struct atmel_nand_host *host, + struct device_node *np) +{ + u32 val; + struct atmel_nand_data *board = &host->board; + enum of_gpio_flags flags = 0; + + host->caps = (struct atmel_nand_caps *) + of_device_get_match_data(host->dev); + + if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) { + if (val >= 32) { + dev_err(host->dev, "invalid addr-offset %u\n", val); + return -EINVAL; + } + board->ale = val; + } + + if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) { + if (val >= 32) { + dev_err(host->dev, "invalid cmd-offset %u\n", val); + return -EINVAL; + } + board->cle = val; + } + + board->has_dma = of_property_read_bool(np, "atmel,nand-has-dma"); + + board->rdy_pin = of_get_gpio_flags(np, 0, &flags); + board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW); + + board->enable_pin = of_get_gpio(np, 1); + board->det_pin = of_get_gpio(np, 2); + + /* load the nfc driver if there is */ + of_platform_populate(np, NULL, NULL, host->dev); + + /* + * Initialize ECC mode to NAND_ECC_SOFT so that we have a correct value + * even if the nand-ecc-mode property is not defined. + */ + host->nand_chip.ecc.mode = NAND_ECC_SOFT; + host->nand_chip.ecc.algo = NAND_ECC_HAMMING; + + return 0; +} + static int atmel_hw_nand_init_params(struct platform_device *pdev, struct atmel_nand_host *host) { @@ -1618,6 +1632,7 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev, dev_err(host->dev, "Can't get I/O resource regs, use software ECC\n"); nand_chip->ecc.mode = NAND_ECC_SOFT; + nand_chip->ecc.algo = NAND_ECC_HAMMING; return 0; } @@ -1631,25 +1646,26 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev, /* set ECC page size and oob layout */ switch (mtd->writesize) { case 512: - nand_chip->ecc.layout = &atmel_oobinfo_small; + mtd_set_ooblayout(mtd, &atmel_ooblayout_sp_ops); ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528); break; case 1024: - nand_chip->ecc.layout = &atmel_oobinfo_large; + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056); break; case 2048: - nand_chip->ecc.layout = &atmel_oobinfo_large; + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112); break; case 4096: - nand_chip->ecc.layout = &atmel_oobinfo_large; + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224); break; default: /* page size not handled by HW ECC */ /* switching back to soft ECC */ nand_chip->ecc.mode = NAND_ECC_SOFT; + nand_chip->ecc.algo = NAND_ECC_HAMMING; return 0; } @@ -2147,6 +2163,19 @@ static int atmel_nand_probe(struct platform_device *pdev) } else { memcpy(&host->board, dev_get_platdata(&pdev->dev), sizeof(struct atmel_nand_data)); + nand_chip->ecc.mode = host->board.ecc_mode; + + /* + * When using software ECC every supported avr32 board means + * Hamming algorithm. If that ever changes we'll need to add + * ecc_algo field to the struct atmel_nand_data. + */ + if (nand_chip->ecc.mode == NAND_ECC_SOFT) + nand_chip->ecc.algo = NAND_ECC_HAMMING; + + /* 16-bit bus width */ + if (host->board.bus_width_16) + nand_chip->options |= NAND_BUSWIDTH_16; } /* link the private data structures */ @@ -2188,11 +2217,8 @@ static int atmel_nand_probe(struct platform_device *pdev) nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl; } - nand_chip->ecc.mode = host->board.ecc_mode; nand_chip->chip_delay = 40; /* 40us command delay time */ - if (host->board.bus_width_16) /* 16-bit bus width */ - nand_chip->options |= NAND_BUSWIDTH_16; nand_chip->read_buf = atmel_read_buf; nand_chip->write_buf = atmel_write_buf; @@ -2225,11 +2251,6 @@ static int atmel_nand_probe(struct platform_device *pdev) } } - if (host->board.on_flash_bbt || on_flash_bbt) { - dev_info(&pdev->dev, "Use On Flash BBT\n"); - nand_chip->bbt_options |= NAND_BBT_USE_FLASH; - } - if (!host->board.has_dma) use_dma = 0; @@ -2256,6 +2277,18 @@ static int atmel_nand_probe(struct platform_device *pdev) goto err_scan_ident; } + if (host->board.on_flash_bbt || on_flash_bbt) + nand_chip->bbt_options |= NAND_BBT_USE_FLASH; + + if (nand_chip->bbt_options & NAND_BBT_USE_FLASH) + dev_info(&pdev->dev, "Use On Flash BBT\n"); + + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { + res = atmel_of_init_ecc(host, pdev->dev.of_node); + if (res) + goto err_hw_ecc; + } + if (nand_chip->ecc.mode == NAND_ECC_HW) { if (host->has_pmecc) res = atmel_pmecc_nand_init_params(pdev, host); diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 341ea4904164..9bf6d9915694 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -459,6 +459,7 @@ static int au1550nd_probe(struct platform_device *pdev) /* 30 us command delay time */ this->chip_delay = 30; this->ecc.mode = NAND_ECC_SOFT; + this->ecc.algo = NAND_ECC_HAMMING; if (pd->devwidth) this->options |= NAND_BUSWIDTH_16; diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 7f6b30e615b7..37da4236ab90 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -109,28 +109,33 @@ static const unsigned short bfin_nfc_pin_req[] = 0}; #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC -static struct nand_ecclayout bootrom_ecclayout = { - .eccbytes = 24, - .eccpos = { - 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2, - 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2, - 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2, - 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2, - 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2, - 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2, - 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2, - 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2 - }, - .oobfree = { - { 0x8 * 0 + 3, 5 }, - { 0x8 * 1 + 3, 5 }, - { 0x8 * 2 + 3, 5 }, - { 0x8 * 3 + 3, 5 }, - { 0x8 * 4 + 3, 5 }, - { 0x8 * 5 + 3, 5 }, - { 0x8 * 6 + 3, 5 }, - { 0x8 * 7 + 3, 5 }, - } +static int bootrom_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = section * 8; + oobregion->length = 3; + + return 0; +} + +static int bootrom_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = (section * 8) + 3; + oobregion->length = 5; + + return 0; +} + +static const struct mtd_ooblayout_ops bootrom_ooblayout_ops = { + .ecc = bootrom_ooblayout_ecc, + .free = bootrom_ooblayout_free, }; #endif @@ -800,7 +805,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) /* setup hardware ECC data struct */ if (hardware_ecc) { #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC - chip->ecc.layout = &bootrom_ecclayout; + mtd_set_ooblayout(mtd, &bootrom_ooblayout_ops); #endif chip->read_buf = bf5xx_nand_dma_read_buf; chip->write_buf = bf5xx_nand_dma_write_buf; @@ -812,6 +817,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) chip->ecc.write_page_raw = bf5xx_nand_write_page_raw; } else { chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_HAMMING; } /* scan hardware nand chip and setup mtd info data struct */ diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c index e0528397306a..b76ad7c0144f 100644 --- a/drivers/mtd/nand/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/brcmnand/brcmnand.c @@ -32,7 +32,6 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/of.h> -#include <linux/of_mtd.h> #include <linux/of_platform.h> #include <linux/slab.h> #include <linux/list.h> @@ -601,7 +600,7 @@ static void brcmnand_wr_corr_thresh(struct brcmnand_host *host, u8 val) static inline int brcmnand_cmd_shift(struct brcmnand_controller *ctrl) { - if (ctrl->nand_version < 0x0700) + if (ctrl->nand_version < 0x0602) return 24; return 0; } @@ -781,127 +780,183 @@ static inline bool is_hamming_ecc(struct brcmnand_cfg *cfg) } /* - * Returns a nand_ecclayout strucutre for the given layout/configuration. - * Returns NULL on failure. + * Set mtd->ooblayout to the appropriate mtd_ooblayout_ops given + * the layout/configuration. + * Returns -ERRCODE on failure. */ -static struct nand_ecclayout *brcmnand_create_layout(int ecc_level, - struct brcmnand_host *host) +static int brcmnand_hamming_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) { + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); struct brcmnand_cfg *cfg = &host->hwcfg; - int i, j; - struct nand_ecclayout *layout; - int req; - int sectors; - int sas; - int idx1, idx2; - - layout = devm_kzalloc(&host->pdev->dev, sizeof(*layout), GFP_KERNEL); - if (!layout) - return NULL; - - sectors = cfg->page_size / (512 << cfg->sector_size_1k); - sas = cfg->spare_area_size << cfg->sector_size_1k; - - /* Hamming */ - if (is_hamming_ecc(cfg)) { - for (i = 0, idx1 = 0, idx2 = 0; i < sectors; i++) { - /* First sector of each page may have BBI */ - if (i == 0) { - layout->oobfree[idx2].offset = i * sas + 1; - /* Small-page NAND use byte 6 for BBI */ - if (cfg->page_size == 512) - layout->oobfree[idx2].offset--; - layout->oobfree[idx2].length = 5; - } else { - layout->oobfree[idx2].offset = i * sas; - layout->oobfree[idx2].length = 6; - } - idx2++; - layout->eccpos[idx1++] = i * sas + 6; - layout->eccpos[idx1++] = i * sas + 7; - layout->eccpos[idx1++] = i * sas + 8; - layout->oobfree[idx2].offset = i * sas + 9; - layout->oobfree[idx2].length = 7; - idx2++; - /* Leave zero-terminated entry for OOBFREE */ - if (idx1 >= MTD_MAX_ECCPOS_ENTRIES_LARGE || - idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1) - break; - } + int sas = cfg->spare_area_size << cfg->sector_size_1k; + int sectors = cfg->page_size / (512 << cfg->sector_size_1k); - return layout; - } + if (section >= sectors) + return -ERANGE; - /* - * CONTROLLER_VERSION: - * < v5.0: ECC_REQ = ceil(BCH_T * 13/8) - * >= v5.0: ECC_REQ = ceil(BCH_T * 14/8) - * But we will just be conservative. - */ - req = DIV_ROUND_UP(ecc_level * 14, 8); - if (req >= sas) { - dev_err(&host->pdev->dev, - "error: ECC too large for OOB (ECC bytes %d, spare sector %d)\n", - req, sas); - return NULL; - } + oobregion->offset = (section * sas) + 6; + oobregion->length = 3; + + return 0; +} + +static int brcmnand_hamming_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); + struct brcmnand_cfg *cfg = &host->hwcfg; + int sas = cfg->spare_area_size << cfg->sector_size_1k; + int sectors = cfg->page_size / (512 << cfg->sector_size_1k); - layout->eccbytes = req * sectors; - for (i = 0, idx1 = 0, idx2 = 0; i < sectors; i++) { - for (j = sas - req; j < sas && idx1 < - MTD_MAX_ECCPOS_ENTRIES_LARGE; j++, idx1++) - layout->eccpos[idx1] = i * sas + j; + if (section >= sectors * 2) + return -ERANGE; + + oobregion->offset = (section / 2) * sas; + + if (section & 1) { + oobregion->offset += 9; + oobregion->length = 7; + } else { + oobregion->length = 6; /* First sector of each page may have BBI */ - if (i == 0) { - if (cfg->page_size == 512 && (sas - req >= 6)) { - /* Small-page NAND use byte 6 for BBI */ - layout->oobfree[idx2].offset = 0; - layout->oobfree[idx2].length = 5; - idx2++; - if (sas - req > 6) { - layout->oobfree[idx2].offset = 6; - layout->oobfree[idx2].length = - sas - req - 6; - idx2++; - } - } else if (sas > req + 1) { - layout->oobfree[idx2].offset = i * sas + 1; - layout->oobfree[idx2].length = sas - req - 1; - idx2++; - } - } else if (sas > req) { - layout->oobfree[idx2].offset = i * sas; - layout->oobfree[idx2].length = sas - req; - idx2++; + if (!section) { + /* + * Small-page NAND use byte 6 for BBI while large-page + * NAND use byte 0. + */ + if (cfg->page_size > 512) + oobregion->offset++; + oobregion->length--; } - /* Leave zero-terminated entry for OOBFREE */ - if (idx1 >= MTD_MAX_ECCPOS_ENTRIES_LARGE || - idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1) - break; } - return layout; + return 0; +} + +static const struct mtd_ooblayout_ops brcmnand_hamming_ooblayout_ops = { + .ecc = brcmnand_hamming_ooblayout_ecc, + .free = brcmnand_hamming_ooblayout_free, +}; + +static int brcmnand_bch_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); + struct brcmnand_cfg *cfg = &host->hwcfg; + int sas = cfg->spare_area_size << cfg->sector_size_1k; + int sectors = cfg->page_size / (512 << cfg->sector_size_1k); + + if (section >= sectors) + return -ERANGE; + + oobregion->offset = (section * (sas + 1)) - chip->ecc.bytes; + oobregion->length = chip->ecc.bytes; + + return 0; +} + +static int brcmnand_bch_ooblayout_free_lp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); + struct brcmnand_cfg *cfg = &host->hwcfg; + int sas = cfg->spare_area_size << cfg->sector_size_1k; + int sectors = cfg->page_size / (512 << cfg->sector_size_1k); + + if (section >= sectors) + return -ERANGE; + + if (sas <= chip->ecc.bytes) + return 0; + + oobregion->offset = section * sas; + oobregion->length = sas - chip->ecc.bytes; + + if (!section) { + oobregion->offset++; + oobregion->length--; + } + + return 0; } -static struct nand_ecclayout *brcmstb_choose_ecc_layout( - struct brcmnand_host *host) +static int brcmnand_bch_ooblayout_free_sp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); + struct brcmnand_cfg *cfg = &host->hwcfg; + int sas = cfg->spare_area_size << cfg->sector_size_1k; + + if (section > 1 || sas - chip->ecc.bytes < 6 || + (section && sas - chip->ecc.bytes == 6)) + return -ERANGE; + + if (!section) { + oobregion->offset = 0; + oobregion->length = 5; + } else { + oobregion->offset = 6; + oobregion->length = sas - chip->ecc.bytes - 6; + } + + return 0; +} + +static const struct mtd_ooblayout_ops brcmnand_bch_lp_ooblayout_ops = { + .ecc = brcmnand_bch_ooblayout_ecc, + .free = brcmnand_bch_ooblayout_free_lp, +}; + +static const struct mtd_ooblayout_ops brcmnand_bch_sp_ooblayout_ops = { + .ecc = brcmnand_bch_ooblayout_ecc, + .free = brcmnand_bch_ooblayout_free_sp, +}; + +static int brcmstb_choose_ecc_layout(struct brcmnand_host *host) { - struct nand_ecclayout *layout; struct brcmnand_cfg *p = &host->hwcfg; + struct mtd_info *mtd = nand_to_mtd(&host->chip); + struct nand_ecc_ctrl *ecc = &host->chip.ecc; unsigned int ecc_level = p->ecc_level; + int sas = p->spare_area_size << p->sector_size_1k; + int sectors = p->page_size / (512 << p->sector_size_1k); if (p->sector_size_1k) ecc_level <<= 1; - layout = brcmnand_create_layout(ecc_level, host); - if (!layout) { + if (is_hamming_ecc(p)) { + ecc->bytes = 3 * sectors; + mtd_set_ooblayout(mtd, &brcmnand_hamming_ooblayout_ops); + return 0; + } + + /* + * CONTROLLER_VERSION: + * < v5.0: ECC_REQ = ceil(BCH_T * 13/8) + * >= v5.0: ECC_REQ = ceil(BCH_T * 14/8) + * But we will just be conservative. + */ + ecc->bytes = DIV_ROUND_UP(ecc_level * 14, 8); + if (p->page_size == 512) + mtd_set_ooblayout(mtd, &brcmnand_bch_sp_ooblayout_ops); + else + mtd_set_ooblayout(mtd, &brcmnand_bch_lp_ooblayout_ops); + + if (ecc->bytes >= sas) { dev_err(&host->pdev->dev, - "no proper ecc_layout for this NAND cfg\n"); - return NULL; + "error: ECC too large for OOB (ECC bytes %d, spare sector %d)\n", + ecc->bytes, sas); + return -EINVAL; } - return layout; + return 0; } static void brcmnand_wp(struct mtd_info *mtd, int wp) @@ -1870,9 +1925,31 @@ static int brcmnand_setup_dev(struct brcmnand_host *host) cfg->col_adr_bytes = 2; cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize); + if (chip->ecc.mode != NAND_ECC_HW) { + dev_err(ctrl->dev, "only HW ECC supported; selected: %d\n", + chip->ecc.mode); + return -EINVAL; + } + + if (chip->ecc.algo == NAND_ECC_UNKNOWN) { + if (chip->ecc.strength == 1 && chip->ecc.size == 512) + /* Default to Hamming for 1-bit ECC, if unspecified */ + chip->ecc.algo = NAND_ECC_HAMMING; + else + /* Otherwise, BCH */ + chip->ecc.algo = NAND_ECC_BCH; + } + + if (chip->ecc.algo == NAND_ECC_HAMMING && (chip->ecc.strength != 1 || + chip->ecc.size != 512)) { + dev_err(ctrl->dev, "invalid Hamming params: %d bits per %d bytes\n", + chip->ecc.strength, chip->ecc.size); + return -EINVAL; + } + switch (chip->ecc.size) { case 512: - if (chip->ecc.strength == 1) /* Hamming */ + if (chip->ecc.algo == NAND_ECC_HAMMING) cfg->ecc_level = 15; else cfg->ecc_level = chip->ecc.strength; @@ -2001,8 +2078,8 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn) */ chip->options |= NAND_USE_BOUNCE_BUFFER; - if (of_get_nand_on_flash_bbt(dn)) - chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; + if (chip->bbt_options & NAND_BBT_USE_FLASH) + chip->bbt_options |= NAND_BBT_NO_OOB; if (brcmnand_setup_dev(host)) return -ENXIO; @@ -2011,9 +2088,9 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn) /* only use our internal HW threshold */ mtd->bitflip_threshold = 1; - chip->ecc.layout = brcmstb_choose_ecc_layout(host); - if (!chip->ecc.layout) - return -ENXIO; + ret = brcmstb_choose_ecc_layout(host); + if (ret) + return ret; if (nand_scan_tail(mtd)) return -ENXIO; @@ -2115,6 +2192,7 @@ static const struct of_device_id brcmnand_of_match[] = { { .compatible = "brcm,brcmnand-v5.0" }, { .compatible = "brcm,brcmnand-v6.0" }, { .compatible = "brcm,brcmnand-v6.1" }, + { .compatible = "brcm,brcmnand-v6.2" }, { .compatible = "brcm,brcmnand-v7.0" }, { .compatible = "brcm,brcmnand-v7.1" }, {}, diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index e553aff68987..0b0c93702abb 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -459,10 +459,37 @@ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, return max_bitflips; } -static struct nand_ecclayout cafe_oobinfo_2048 = { - .eccbytes = 14, - .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, - .oobfree = {{14, 50}} +static int cafe_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + + if (section) + return -ERANGE; + + oobregion->offset = 0; + oobregion->length = chip->ecc.total; + + return 0; +} + +static int cafe_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + + if (section) + return -ERANGE; + + oobregion->offset = chip->ecc.total; + oobregion->length = mtd->oobsize - chip->ecc.total; + + return 0; +} + +static const struct mtd_ooblayout_ops cafe_ooblayout_ops = { + .ecc = cafe_ooblayout_ecc, + .free = cafe_ooblayout_free, }; /* Ick. The BBT code really ought to be able to work this bit out @@ -494,12 +521,6 @@ static struct nand_bbt_descr cafe_bbt_mirror_descr_2048 = { .pattern = cafe_mirror_pattern_2048 }; -static struct nand_ecclayout cafe_oobinfo_512 = { - .eccbytes = 14, - .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, - .oobfree = {{14, 2}} -}; - static struct nand_bbt_descr cafe_bbt_main_descr_512 = { .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | NAND_BBT_2BIT | NAND_BBT_VERSION, @@ -743,12 +764,11 @@ static int cafe_nand_probe(struct pci_dev *pdev, cafe->ctl2 |= 1<<29; /* 2KiB page size */ /* Set up ECC according to the type of chip we found */ + mtd_set_ooblayout(mtd, &cafe_ooblayout_ops); if (mtd->writesize == 2048) { - cafe->nand.ecc.layout = &cafe_oobinfo_2048; cafe->nand.bbt_td = &cafe_bbt_main_descr_2048; cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048; } else if (mtd->writesize == 512) { - cafe->nand.ecc.layout = &cafe_oobinfo_512; cafe->nand.bbt_td = &cafe_bbt_main_descr_512; cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512; } else { diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index 6f97ebba52c4..49133783ca53 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c @@ -187,6 +187,7 @@ static int __init cmx270_init(void) /* 15 us command delay time */ this->chip_delay = 20; this->ecc.mode = NAND_ECC_SOFT; + this->ecc.algo = NAND_ECC_HAMMING; /* read/write functions */ this->read_byte = cmx270_read_byte; diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 8cb821b6686e..cc07ba0f044d 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -34,7 +34,6 @@ #include <linux/slab.h> #include <linux/of_device.h> #include <linux/of.h> -#include <linux/of_mtd.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> @@ -54,7 +53,6 @@ */ struct davinci_nand_info { struct nand_chip chip; - struct nand_ecclayout ecclayout; struct device *dev; struct clk *clk; @@ -480,63 +478,46 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd) * ten ECC bytes plus the manufacturer's bad block marker byte, and * and not overlapping the default BBT markers. */ -static struct nand_ecclayout hwecc4_small = { - .eccbytes = 10, - .eccpos = { 0, 1, 2, 3, 4, - /* offset 5 holds the badblock marker */ - 6, 7, - 13, 14, 15, }, - .oobfree = { - {.offset = 8, .length = 5, }, - {.offset = 16, }, - }, -}; +static int hwecc4_ooblayout_small_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 2) + return -ERANGE; + + if (!section) { + oobregion->offset = 0; + oobregion->length = 5; + } else if (section == 1) { + oobregion->offset = 6; + oobregion->length = 2; + } else { + oobregion->offset = 13; + oobregion->length = 3; + } -/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash, - * storing ten ECC bytes plus the manufacturer's bad block marker byte, - * and not overlapping the default BBT markers. - */ -static struct nand_ecclayout hwecc4_2048 = { - .eccbytes = 40, - .eccpos = { - /* at the end of spare sector */ - 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, - 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, - 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, - 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, - }, - .oobfree = { - /* 2 bytes at offset 0 hold manufacturer badblock markers */ - {.offset = 2, .length = 22, }, - /* 5 bytes at offset 8 hold BBT markers */ - /* 8 bytes at offset 16 hold JFFS2 clean markers */ - }, -}; + return 0; +} -/* - * An ECC layout for using 4-bit ECC with large-page (4096bytes) flash, - * storing ten ECC bytes plus the manufacturer's bad block marker byte, - * and not overlapping the default BBT markers. - */ -static struct nand_ecclayout hwecc4_4096 = { - .eccbytes = 80, - .eccpos = { - /* at the end of spare sector */ - 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, - 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, - 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, - 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, - 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, - 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, - 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, - 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, - }, - .oobfree = { - /* 2 bytes at offset 0 hold manufacturer badblock markers */ - {.offset = 2, .length = 46, }, - /* 5 bytes at offset 8 hold BBT markers */ - /* 8 bytes at offset 16 hold JFFS2 clean markers */ - }, +static int hwecc4_ooblayout_small_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 1) + return -ERANGE; + + if (!section) { + oobregion->offset = 8; + oobregion->length = 5; + } else { + oobregion->offset = 16; + oobregion->length = mtd->oobsize - 16; + } + + return 0; +} + +static const struct mtd_ooblayout_ops hwecc4_small_ooblayout_ops = { + .ecc = hwecc4_ooblayout_small_ecc, + .free = hwecc4_ooblayout_small_free, }; #if defined(CONFIG_OF) @@ -577,8 +558,6 @@ static struct davinci_nand_pdata "ti,davinci-mask-chipsel", &prop)) pdata->mask_chipsel = prop; if (!of_property_read_string(pdev->dev.of_node, - "nand-ecc-mode", &mode) || - !of_property_read_string(pdev->dev.of_node, "ti,davinci-ecc-mode", &mode)) { if (!strncmp("none", mode, 4)) pdata->ecc_mode = NAND_ECC_NONE; @@ -591,14 +570,11 @@ static struct davinci_nand_pdata "ti,davinci-ecc-bits", &prop)) pdata->ecc_bits = prop; - prop = of_get_nand_bus_width(pdev->dev.of_node); - if (0 < prop || !of_property_read_u32(pdev->dev.of_node, - "ti,davinci-nand-buswidth", &prop)) - if (prop == 16) - pdata->options |= NAND_BUSWIDTH_16; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-nand-buswidth", &prop) && prop == 16) + pdata->options |= NAND_BUSWIDTH_16; + if (of_property_read_bool(pdev->dev.of_node, - "nand-on-flash-bbt") || - of_property_read_bool(pdev->dev.of_node, "ti,davinci-nand-use-bbt")) pdata->bbt_options = NAND_BBT_USE_FLASH; @@ -628,7 +604,6 @@ static int nand_davinci_probe(struct platform_device *pdev) void __iomem *base; int ret; uint32_t val; - nand_ecc_modes_t ecc_mode; struct mtd_info *mtd; pdata = nand_davinci_get_pdata(pdev); @@ -712,13 +687,53 @@ static int nand_davinci_probe(struct platform_device *pdev) info->chip.write_buf = nand_davinci_write_buf; /* Use board-specific ECC config */ - ecc_mode = pdata->ecc_mode; + info->chip.ecc.mode = pdata->ecc_mode; ret = -EINVAL; - switch (ecc_mode) { + + info->clk = devm_clk_get(&pdev->dev, "aemif"); + if (IS_ERR(info->clk)) { + ret = PTR_ERR(info->clk); + dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(info->clk); + if (ret < 0) { + dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n", + ret); + goto err_clk_enable; + } + + spin_lock_irq(&davinci_nand_lock); + + /* put CSxNAND into NAND mode */ + val = davinci_nand_readl(info, NANDFCR_OFFSET); + val |= BIT(info->core_chipsel); + davinci_nand_writel(info, NANDFCR_OFFSET, val); + + spin_unlock_irq(&davinci_nand_lock); + + /* Scan to find existence of the device(s) */ + ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL); + if (ret < 0) { + dev_dbg(&pdev->dev, "no NAND chip(s) found\n"); + goto err; + } + + switch (info->chip.ecc.mode) { case NAND_ECC_NONE: + pdata->ecc_bits = 0; + break; case NAND_ECC_SOFT: pdata->ecc_bits = 0; + /* + * This driver expects Hamming based ECC when ecc_mode is set + * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to + * avoid adding an extra ->ecc_algo field to + * davinci_nand_pdata. + */ + info->chip.ecc.algo = NAND_ECC_HAMMING; break; case NAND_ECC_HW: if (pdata->ecc_bits == 4) { @@ -754,37 +769,6 @@ static int nand_davinci_probe(struct platform_device *pdev) default: return -EINVAL; } - info->chip.ecc.mode = ecc_mode; - - info->clk = devm_clk_get(&pdev->dev, "aemif"); - if (IS_ERR(info->clk)) { - ret = PTR_ERR(info->clk); - dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); - return ret; - } - - ret = clk_prepare_enable(info->clk); - if (ret < 0) { - dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n", - ret); - goto err_clk_enable; - } - - spin_lock_irq(&davinci_nand_lock); - - /* put CSxNAND into NAND mode */ - val = davinci_nand_readl(info, NANDFCR_OFFSET); - val |= BIT(info->core_chipsel); - davinci_nand_writel(info, NANDFCR_OFFSET, val); - - spin_unlock_irq(&davinci_nand_lock); - - /* Scan to find existence of the device(s) */ - ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL); - if (ret < 0) { - dev_dbg(&pdev->dev, "no NAND chip(s) found\n"); - goto err; - } /* Update ECC layout if needed ... for 1-bit HW ECC, the default * is OK, but it allocates 6 bytes when only 3 are needed (for @@ -805,26 +789,14 @@ static int nand_davinci_probe(struct platform_device *pdev) * table marker fits in the free bytes. */ if (chunks == 1) { - info->ecclayout = hwecc4_small; - info->ecclayout.oobfree[1].length = mtd->oobsize - 16; - goto syndrome_done; - } - if (chunks == 4) { - info->ecclayout = hwecc4_2048; - info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; - goto syndrome_done; - } - if (chunks == 8) { - info->ecclayout = hwecc4_4096; + mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops); + } else if (chunks == 4 || chunks == 8) { + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; - goto syndrome_done; + } else { + ret = -EIO; + goto err; } - - ret = -EIO; - goto err; - -syndrome_done: - info->chip.ecc.layout = &info->ecclayout; } ret = nand_scan_tail(mtd); @@ -850,7 +822,7 @@ err: err_clk_enable: spin_lock_irq(&davinci_nand_lock); - if (ecc_mode == NAND_ECC_HW_SYNDROME) + if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME) ecc4_busy = false; spin_unlock_irq(&davinci_nand_lock); return ret; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 30bf5f690f78..0476ae8776d9 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1374,13 +1374,41 @@ static void denali_hw_init(struct denali_nand_info *denali) * correction */ #define ECC_8BITS 14 -static struct nand_ecclayout nand_8bit_oob = { - .eccbytes = 14, -}; - #define ECC_15BITS 26 -static struct nand_ecclayout nand_15bit_oob = { - .eccbytes = 26, + +static int denali_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + struct nand_chip *chip = mtd_to_nand(mtd); + + if (section) + return -ERANGE; + + oobregion->offset = denali->bbtskipbytes; + oobregion->length = chip->ecc.total; + + return 0; +} + +static int denali_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + struct nand_chip *chip = mtd_to_nand(mtd); + + if (section) + return -ERANGE; + + oobregion->offset = chip->ecc.total + denali->bbtskipbytes; + oobregion->length = mtd->oobsize - oobregion->offset; + + return 0; +} + +static const struct mtd_ooblayout_ops denali_ooblayout_ops = { + .ecc = denali_ooblayout_ecc, + .free = denali_ooblayout_free, }; static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; @@ -1561,7 +1589,6 @@ int denali_init(struct denali_nand_info *denali) ECC_SECTOR_SIZE)))) { /* if MLC OOB size is large enough, use 15bit ECC*/ denali->nand.ecc.strength = 15; - denali->nand.ecc.layout = &nand_15bit_oob; denali->nand.ecc.bytes = ECC_15BITS; iowrite32(15, denali->flash_reg + ECC_CORRECTION); } else if (mtd->oobsize < (denali->bbtskipbytes + @@ -1571,20 +1598,13 @@ int denali_init(struct denali_nand_info *denali) goto failed_req_irq; } else { denali->nand.ecc.strength = 8; - denali->nand.ecc.layout = &nand_8bit_oob; denali->nand.ecc.bytes = ECC_8BITS; iowrite32(8, denali->flash_reg + ECC_CORRECTION); } + mtd_set_ooblayout(mtd, &denali_ooblayout_ops); denali->nand.ecc.bytes *= denali->devnum; denali->nand.ecc.strength *= denali->devnum; - denali->nand.ecc.layout->eccbytes *= - mtd->writesize / ECC_SECTOR_SIZE; - denali->nand.ecc.layout->oobfree[0].offset = - denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes; - denali->nand.ecc.layout->oobfree[0].length = - mtd->oobsize - denali->nand.ecc.layout->eccbytes - - denali->bbtskipbytes; /* * Let driver know the total blocks number and how many blocks diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 547c1002941d..a023ab9e9cbf 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -950,20 +950,50 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, //u_char mydatabuf[528]; -/* The strange out-of-order .oobfree list below is a (possibly unneeded) - * attempt to retain compatibility. It used to read: - * .oobfree = { {8, 8} } - * Since that leaves two bytes unusable, it was changed. But the following - * scheme might affect existing jffs2 installs by moving the cleanmarker: - * .oobfree = { {6, 10} } - * jffs2 seems to handle the above gracefully, but the current scheme seems - * safer. The only problem with it is that any code that parses oobfree must - * be able to handle out-of-order segments. - */ -static struct nand_ecclayout doc200x_oobinfo = { - .eccbytes = 6, - .eccpos = {0, 1, 2, 3, 4, 5}, - .oobfree = {{8, 8}, {6, 2}} +static int doc200x_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 0; + oobregion->length = 6; + + return 0; +} + +static int doc200x_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 1) + return -ERANGE; + + /* + * The strange out-of-order free bytes definition is a (possibly + * unneeded) attempt to retain compatibility. It used to read: + * .oobfree = { {8, 8} } + * Since that leaves two bytes unusable, it was changed. But the + * following scheme might affect existing jffs2 installs by moving the + * cleanmarker: + * .oobfree = { {6, 10} } + * jffs2 seems to handle the above gracefully, but the current scheme + * seems safer. The only problem with it is that any code retrieving + * free bytes position must be able to handle out-of-order segments. + */ + if (!section) { + oobregion->offset = 8; + oobregion->length = 8; + } else { + oobregion->offset = 6; + oobregion->length = 2; + } + + return 0; +} + +static const struct mtd_ooblayout_ops doc200x_ooblayout_ops = { + .ecc = doc200x_ooblayout_ecc, + .free = doc200x_ooblayout_free, }; /* Find the (I)NFTL Media Header, and optionally also the mirror media header. @@ -1537,6 +1567,7 @@ static int __init doc_probe(unsigned long physadr) nand->bbt_md = nand->bbt_td + 1; mtd->owner = THIS_MODULE; + mtd_set_ooblayout(mtd, &doc200x_ooblayout_ops); nand_set_controller_data(nand, doc); nand->select_chip = doc200x_select_chip; @@ -1548,7 +1579,6 @@ static int __init doc_probe(unsigned long physadr) nand->ecc.calculate = doc200x_calculate_ecc; nand->ecc.correct = doc200x_correct_data; - nand->ecc.layout = &doc200x_oobinfo; nand->ecc.mode = NAND_ECC_HW_SYNDROME; nand->ecc.size = 512; nand->ecc.bytes = 6; diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index d86a60e1bbcb..47316998017f 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -222,10 +222,33 @@ struct docg4_priv { * Bytes 8 - 14 are hw-generated ecc covering entire page + oob bytes 0 - 14. * Byte 15 (the last) is used by the driver as a "page written" flag. */ -static struct nand_ecclayout docg4_oobinfo = { - .eccbytes = 9, - .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15}, - .oobfree = { {.offset = 2, .length = 5} } +static int docg4_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 7; + oobregion->length = 9; + + return 0; +} + +static int docg4_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 2; + oobregion->length = 5; + + return 0; +} + +static const struct mtd_ooblayout_ops docg4_ooblayout_ops = { + .ecc = docg4_ooblayout_ecc, + .free = docg4_ooblayout_free, }; /* @@ -1209,6 +1232,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd) mtd->writesize = DOCG4_PAGE_SIZE; mtd->erasesize = DOCG4_BLOCK_SIZE; mtd->oobsize = DOCG4_OOB_SIZE; + mtd_set_ooblayout(mtd, &docg4_ooblayout_ops); nand->chipsize = DOCG4_CHIP_SIZE; nand->chip_shift = DOCG4_CHIP_SHIFT; nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT; @@ -1217,7 +1241,6 @@ static void __init init_mtd_structs(struct mtd_info *mtd) nand->pagemask = 0x3ffff; nand->badblockpos = NAND_LARGE_BADBLOCK_POS; nand->badblockbits = 8; - nand->ecc.layout = &docg4_oobinfo; nand->ecc.mode = NAND_ECC_HW_SYNDROME; nand->ecc.size = DOCG4_PAGE_SIZE; nand->ecc.prepad = 8; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 059d5f7ec124..60a88f24c6b3 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -79,32 +79,53 @@ struct fsl_elbc_fcm_ctrl { /* These map to the positions used by the FCM hardware ECC generator */ -/* Small Page FLASH with FMR[ECCM] = 0 */ -static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = { - .eccbytes = 3, - .eccpos = {6, 7, 8}, - .oobfree = { {0, 5}, {9, 7} }, -}; +static int fsl_elbc_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct fsl_elbc_mtd *priv = nand_get_controller_data(chip); -/* Small Page FLASH with FMR[ECCM] = 1 */ -static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = { - .eccbytes = 3, - .eccpos = {8, 9, 10}, - .oobfree = { {0, 5}, {6, 2}, {11, 5} }, -}; + if (section >= chip->ecc.steps) + return -ERANGE; -/* Large Page FLASH with FMR[ECCM] = 0 */ -static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = { - .eccbytes = 12, - .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56}, - .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} }, -}; + oobregion->offset = (16 * section) + 6; + if (priv->fmr & FMR_ECCM) + oobregion->offset += 2; -/* Large Page FLASH with FMR[ECCM] = 1 */ -static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = { - .eccbytes = 12, - .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58}, - .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} }, + oobregion->length = chip->ecc.bytes; + + return 0; +} + +static int fsl_elbc_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct fsl_elbc_mtd *priv = nand_get_controller_data(chip); + + if (section > chip->ecc.steps) + return -ERANGE; + + if (!section) { + oobregion->offset = 0; + if (mtd->writesize > 512) + oobregion->offset++; + oobregion->length = (priv->fmr & FMR_ECCM) ? 7 : 5; + } else { + oobregion->offset = (16 * section) - + ((priv->fmr & FMR_ECCM) ? 5 : 7); + if (section < chip->ecc.steps) + oobregion->length = 13; + else + oobregion->length = mtd->oobsize - oobregion->offset; + } + + return 0; +} + +static const struct mtd_ooblayout_ops fsl_elbc_ooblayout_ops = { + .ecc = fsl_elbc_ooblayout_ecc, + .free = fsl_elbc_ooblayout_free, }; /* @@ -657,8 +678,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) chip->ecc.bytes); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n", chip->ecc.total); - dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n", - chip->ecc.layout); + dev_dbg(priv->dev, "fsl_elbc_init: mtd->ooblayout = %p\n", + mtd->ooblayout); dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags); dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size); dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n", @@ -675,14 +696,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) } else if (mtd->writesize == 2048) { priv->page_size = 1; setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS); - /* adjust ecc setup if needed */ - if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) == - BR_DECC_CHK_GEN) { - chip->ecc.size = 512; - chip->ecc.layout = (priv->fmr & FMR_ECCM) ? - &fsl_elbc_oob_lp_eccm1 : - &fsl_elbc_oob_lp_eccm0; - } } else { dev_err(priv->dev, "fsl_elbc_init: page size %d is not supported\n", @@ -780,15 +793,14 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) == BR_DECC_CHK_GEN) { chip->ecc.mode = NAND_ECC_HW; - /* put in small page settings and adjust later if needed */ - chip->ecc.layout = (priv->fmr & FMR_ECCM) ? - &fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0; + mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops); chip->ecc.size = 512; chip->ecc.bytes = 3; chip->ecc.strength = 1; } else { /* otherwise fall back to default software ECC */ chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_HAMMING; } return 0; diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 43f5a3a4873f..4e9e5fd8faf3 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -67,136 +67,6 @@ struct fsl_ifc_nand_ctrl { static struct fsl_ifc_nand_ctrl *ifc_nand_ctrl; -/* 512-byte page with 4-bit ECC, 8-bit */ -static struct nand_ecclayout oob_512_8bit_ecc4 = { - .eccbytes = 8, - .eccpos = {8, 9, 10, 11, 12, 13, 14, 15}, - .oobfree = { {0, 5}, {6, 2} }, -}; - -/* 512-byte page with 4-bit ECC, 16-bit */ -static struct nand_ecclayout oob_512_16bit_ecc4 = { - .eccbytes = 8, - .eccpos = {8, 9, 10, 11, 12, 13, 14, 15}, - .oobfree = { {2, 6}, }, -}; - -/* 2048-byte page size with 4-bit ECC */ -static struct nand_ecclayout oob_2048_ecc4 = { - .eccbytes = 32, - .eccpos = { - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - }, - .oobfree = { {2, 6}, {40, 24} }, -}; - -/* 4096-byte page size with 4-bit ECC */ -static struct nand_ecclayout oob_4096_ecc4 = { - .eccbytes = 64, - .eccpos = { - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 65, 66, 67, 68, 69, 70, 71, - }, - .oobfree = { {2, 6}, {72, 56} }, -}; - -/* 4096-byte page size with 8-bit ECC -- requires 218-byte OOB */ -static struct nand_ecclayout oob_4096_ecc8 = { - .eccbytes = 128, - .eccpos = { - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 65, 66, 67, 68, 69, 70, 71, - 72, 73, 74, 75, 76, 77, 78, 79, - 80, 81, 82, 83, 84, 85, 86, 87, - 88, 89, 90, 91, 92, 93, 94, 95, - 96, 97, 98, 99, 100, 101, 102, 103, - 104, 105, 106, 107, 108, 109, 110, 111, - 112, 113, 114, 115, 116, 117, 118, 119, - 120, 121, 122, 123, 124, 125, 126, 127, - 128, 129, 130, 131, 132, 133, 134, 135, - }, - .oobfree = { {2, 6}, {136, 82} }, -}; - -/* 8192-byte page size with 4-bit ECC */ -static struct nand_ecclayout oob_8192_ecc4 = { - .eccbytes = 128, - .eccpos = { - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 65, 66, 67, 68, 69, 70, 71, - 72, 73, 74, 75, 76, 77, 78, 79, - 80, 81, 82, 83, 84, 85, 86, 87, - 88, 89, 90, 91, 92, 93, 94, 95, - 96, 97, 98, 99, 100, 101, 102, 103, - 104, 105, 106, 107, 108, 109, 110, 111, - 112, 113, 114, 115, 116, 117, 118, 119, - 120, 121, 122, 123, 124, 125, 126, 127, - 128, 129, 130, 131, 132, 133, 134, 135, - }, - .oobfree = { {2, 6}, {136, 208} }, -}; - -/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */ -static struct nand_ecclayout oob_8192_ecc8 = { - .eccbytes = 256, - .eccpos = { - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 65, 66, 67, 68, 69, 70, 71, - 72, 73, 74, 75, 76, 77, 78, 79, - 80, 81, 82, 83, 84, 85, 86, 87, - 88, 89, 90, 91, 92, 93, 94, 95, - 96, 97, 98, 99, 100, 101, 102, 103, - 104, 105, 106, 107, 108, 109, 110, 111, - 112, 113, 114, 115, 116, 117, 118, 119, - 120, 121, 122, 123, 124, 125, 126, 127, - 128, 129, 130, 131, 132, 133, 134, 135, - 136, 137, 138, 139, 140, 141, 142, 143, - 144, 145, 146, 147, 148, 149, 150, 151, - 152, 153, 154, 155, 156, 157, 158, 159, - 160, 161, 162, 163, 164, 165, 166, 167, - 168, 169, 170, 171, 172, 173, 174, 175, - 176, 177, 178, 179, 180, 181, 182, 183, - 184, 185, 186, 187, 188, 189, 190, 191, - 192, 193, 194, 195, 196, 197, 198, 199, - 200, 201, 202, 203, 204, 205, 206, 207, - 208, 209, 210, 211, 212, 213, 214, 215, - 216, 217, 218, 219, 220, 221, 222, 223, - 224, 225, 226, 227, 228, 229, 230, 231, - 232, 233, 234, 235, 236, 237, 238, 239, - 240, 241, 242, 243, 244, 245, 246, 247, - 248, 249, 250, 251, 252, 253, 254, 255, - 256, 257, 258, 259, 260, 261, 262, 263, - }, - .oobfree = { {2, 6}, {264, 80} }, -}; - /* * Generic flash bbt descriptors */ @@ -223,6 +93,57 @@ static struct nand_bbt_descr bbt_mirror_descr = { .pattern = mirror_pattern, }; +static int fsl_ifc_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + + if (section) + return -ERANGE; + + oobregion->offset = 8; + oobregion->length = chip->ecc.total; + + return 0; +} + +static int fsl_ifc_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + + if (section > 1) + return -ERANGE; + + if (mtd->writesize == 512 && + !(chip->options & NAND_BUSWIDTH_16)) { + if (!section) { + oobregion->offset = 0; + oobregion->length = 5; + } else { + oobregion->offset = 6; + oobregion->length = 2; + } + + return 0; + } + + if (!section) { + oobregion->offset = 2; + oobregion->length = 6; + } else { + oobregion->offset = chip->ecc.total + 8; + oobregion->length = mtd->oobsize - oobregion->offset; + } + + return 0; +} + +static const struct mtd_ooblayout_ops fsl_ifc_ooblayout_ops = { + .ecc = fsl_ifc_ooblayout_ecc, + .free = fsl_ifc_ooblayout_free, +}; + /* * Set up the IFC hardware block and page address fields, and the ifc nand * structure addr field to point to the correct IFC buffer in memory @@ -232,7 +153,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) struct nand_chip *chip = mtd_to_nand(mtd); struct fsl_ifc_mtd *priv = nand_get_controller_data(chip); struct fsl_ifc_ctrl *ctrl = priv->ctrl; - struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs; int buf_num; ifc_nand_ctrl->page = page_addr; @@ -257,18 +178,22 @@ static int is_blank(struct mtd_info *mtd, unsigned int bufnum) u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2); u32 __iomem *mainarea = (u32 __iomem *)addr; u8 __iomem *oob = addr + mtd->writesize; - int i; + struct mtd_oob_region oobregion = { }; + int i, section = 0; for (i = 0; i < mtd->writesize / 4; i++) { if (__raw_readl(&mainarea[i]) != 0xffffffff) return 0; } - for (i = 0; i < chip->ecc.layout->eccbytes; i++) { - int pos = chip->ecc.layout->eccpos[i]; + mtd_ooblayout_ecc(mtd, section++, &oobregion); + while (oobregion.length) { + for (i = 0; i < oobregion.length; i++) { + if (__raw_readb(&oob[oobregion.offset + i]) != 0xff) + return 0; + } - if (__raw_readb(&oob[pos]) != 0xff) - return 0; + mtd_ooblayout_ecc(mtd, section++, &oobregion); } return 1; @@ -295,7 +220,7 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) struct fsl_ifc_mtd *priv = nand_get_controller_data(chip); struct fsl_ifc_ctrl *ctrl = priv->ctrl; struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl; - struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs; u32 eccstat[4]; int i; @@ -371,7 +296,7 @@ static void fsl_ifc_do_read(struct nand_chip *chip, { struct fsl_ifc_mtd *priv = nand_get_controller_data(chip); struct fsl_ifc_ctrl *ctrl = priv->ctrl; - struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs; /* Program FIR/IFC_NAND_FCR0 for Small/Large page */ if (mtd->writesize > 512) { @@ -411,7 +336,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, struct nand_chip *chip = mtd_to_nand(mtd); struct fsl_ifc_mtd *priv = nand_get_controller_data(chip); struct fsl_ifc_ctrl *ctrl = priv->ctrl; - struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs; /* clear the read buffer */ ifc_nand_ctrl->read_bytes = 0; @@ -723,7 +648,7 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) { struct fsl_ifc_mtd *priv = nand_get_controller_data(chip); struct fsl_ifc_ctrl *ctrl = priv->ctrl; - struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs; u32 nand_fsr; /* Use READ_STATUS command, but wait for the device to be ready */ @@ -808,8 +733,8 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd) chip->ecc.bytes); dev_dbg(priv->dev, "%s: nand->ecc.total = %d\n", __func__, chip->ecc.total); - dev_dbg(priv->dev, "%s: nand->ecc.layout = %p\n", __func__, - chip->ecc.layout); + dev_dbg(priv->dev, "%s: mtd->ooblayout = %p\n", __func__, + mtd->ooblayout); dev_dbg(priv->dev, "%s: mtd->flags = %08x\n", __func__, mtd->flags); dev_dbg(priv->dev, "%s: mtd->size = %lld\n", __func__, mtd->size); dev_dbg(priv->dev, "%s: mtd->erasesize = %d\n", __func__, @@ -825,39 +750,42 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd) static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv) { struct fsl_ifc_ctrl *ctrl = priv->ctrl; - struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + struct fsl_ifc_runtime __iomem *ifc_runtime = ctrl->rregs; + struct fsl_ifc_global __iomem *ifc_global = ctrl->gregs; uint32_t csor = 0, csor_8k = 0, csor_ext = 0; uint32_t cs = priv->bank; /* Save CSOR and CSOR_ext */ - csor = ifc_in32(&ifc->csor_cs[cs].csor); - csor_ext = ifc_in32(&ifc->csor_cs[cs].csor_ext); + csor = ifc_in32(&ifc_global->csor_cs[cs].csor); + csor_ext = ifc_in32(&ifc_global->csor_cs[cs].csor_ext); /* chage PageSize 8K and SpareSize 1K*/ csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000; - ifc_out32(csor_8k, &ifc->csor_cs[cs].csor); - ifc_out32(0x0000400, &ifc->csor_cs[cs].csor_ext); + ifc_out32(csor_8k, &ifc_global->csor_cs[cs].csor); + ifc_out32(0x0000400, &ifc_global->csor_cs[cs].csor_ext); /* READID */ ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT), - &ifc->ifc_nand.nand_fir0); + (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT), + &ifc_runtime->ifc_nand.nand_fir0); ifc_out32(NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT, - &ifc->ifc_nand.nand_fcr0); - ifc_out32(0x0, &ifc->ifc_nand.row3); + &ifc_runtime->ifc_nand.nand_fcr0); + ifc_out32(0x0, &ifc_runtime->ifc_nand.row3); - ifc_out32(0x0, &ifc->ifc_nand.nand_fbcr); + ifc_out32(0x0, &ifc_runtime->ifc_nand.nand_fbcr); /* Program ROW0/COL0 */ - ifc_out32(0x0, &ifc->ifc_nand.row0); - ifc_out32(0x0, &ifc->ifc_nand.col0); + ifc_out32(0x0, &ifc_runtime->ifc_nand.row0); + ifc_out32(0x0, &ifc_runtime->ifc_nand.col0); /* set the chip select for NAND Transaction */ - ifc_out32(cs << IFC_NAND_CSEL_SHIFT, &ifc->ifc_nand.nand_csel); + ifc_out32(cs << IFC_NAND_CSEL_SHIFT, + &ifc_runtime->ifc_nand.nand_csel); /* start read seq */ - ifc_out32(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt); + ifc_out32(IFC_NAND_SEQ_STRT_FIR_STRT, + &ifc_runtime->ifc_nand.nandseq_strt); /* wait for command complete flag or timeout */ wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat, @@ -867,17 +795,17 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv) printk(KERN_ERR "fsl-ifc: Failed to Initialise SRAM\n"); /* Restore CSOR and CSOR_ext */ - ifc_out32(csor, &ifc->csor_cs[cs].csor); - ifc_out32(csor_ext, &ifc->csor_cs[cs].csor_ext); + ifc_out32(csor, &ifc_global->csor_cs[cs].csor); + ifc_out32(csor_ext, &ifc_global->csor_cs[cs].csor_ext); } static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) { struct fsl_ifc_ctrl *ctrl = priv->ctrl; - struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + struct fsl_ifc_global __iomem *ifc_global = ctrl->gregs; + struct fsl_ifc_runtime __iomem *ifc_runtime = ctrl->rregs; struct nand_chip *chip = &priv->chip; struct mtd_info *mtd = nand_to_mtd(&priv->chip); - struct nand_ecclayout *layout; u32 csor; /* Fill in fsl_ifc_mtd structure */ @@ -886,7 +814,8 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) /* fill in nand_chip structure */ /* set up function call table */ - if ((ifc_in32(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16) + if ((ifc_in32(&ifc_global->cspr_cs[priv->bank].cspr)) + & CSPR_PORT_SIZE_16) chip->read_byte = fsl_ifc_read_byte16; else chip->read_byte = fsl_ifc_read_byte; @@ -900,13 +829,14 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->bbt_td = &bbt_main_descr; chip->bbt_md = &bbt_mirror_descr; - ifc_out32(0x0, &ifc->ifc_nand.ncfgr); + ifc_out32(0x0, &ifc_runtime->ifc_nand.ncfgr); /* set up nand options */ chip->bbt_options = NAND_BBT_USE_FLASH; chip->options = NAND_NO_SUBPAGE_WRITE; - if (ifc_in32(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) { + if (ifc_in32(&ifc_global->cspr_cs[priv->bank].cspr) + & CSPR_PORT_SIZE_16) { chip->read_byte = fsl_ifc_read_byte16; chip->options |= NAND_BUSWIDTH_16; } else { @@ -919,20 +849,11 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->ecc.read_page = fsl_ifc_read_page; chip->ecc.write_page = fsl_ifc_write_page; - csor = ifc_in32(&ifc->csor_cs[priv->bank].csor); - - /* Hardware generates ECC per 512 Bytes */ - chip->ecc.size = 512; - chip->ecc.bytes = 8; - chip->ecc.strength = 4; + csor = ifc_in32(&ifc_global->csor_cs[priv->bank].csor); switch (csor & CSOR_NAND_PGS_MASK) { case CSOR_NAND_PGS_512: - if (chip->options & NAND_BUSWIDTH_16) { - layout = &oob_512_16bit_ecc4; - } else { - layout = &oob_512_8bit_ecc4; - + if (!(chip->options & NAND_BUSWIDTH_16)) { /* Avoid conflict with bad block marker */ bbt_main_descr.offs = 0; bbt_mirror_descr.offs = 0; @@ -942,35 +863,16 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) break; case CSOR_NAND_PGS_2K: - layout = &oob_2048_ecc4; priv->bufnum_mask = 3; break; case CSOR_NAND_PGS_4K: - if ((csor & CSOR_NAND_ECC_MODE_MASK) == - CSOR_NAND_ECC_MODE_4) { - layout = &oob_4096_ecc4; - } else { - layout = &oob_4096_ecc8; - chip->ecc.bytes = 16; - chip->ecc.strength = 8; - } - priv->bufnum_mask = 1; break; case CSOR_NAND_PGS_8K: - if ((csor & CSOR_NAND_ECC_MODE_MASK) == - CSOR_NAND_ECC_MODE_4) { - layout = &oob_8192_ecc4; - } else { - layout = &oob_8192_ecc8; - chip->ecc.bytes = 16; - chip->ecc.strength = 8; - } - priv->bufnum_mask = 0; - break; + break; default: dev_err(priv->dev, "bad csor %#x: bad page size\n", csor); @@ -980,9 +882,20 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) /* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */ if (csor & CSOR_NAND_ECC_DEC_EN) { chip->ecc.mode = NAND_ECC_HW; - chip->ecc.layout = layout; + mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops); + + /* Hardware generates ECC per 512 Bytes */ + chip->ecc.size = 512; + if ((csor & CSOR_NAND_ECC_MODE_MASK) == CSOR_NAND_ECC_MODE_4) { + chip->ecc.bytes = 8; + chip->ecc.strength = 4; + } else { + chip->ecc.bytes = 16; + chip->ecc.strength = 8; + } } else { chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_HAMMING; } if (ctrl->version == FSL_IFC_VERSION_1_1_0) @@ -1007,10 +920,10 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv) return 0; } -static int match_bank(struct fsl_ifc_regs __iomem *ifc, int bank, +static int match_bank(struct fsl_ifc_global __iomem *ifc_global, int bank, phys_addr_t addr) { - u32 cspr = ifc_in32(&ifc->cspr_cs[bank].cspr); + u32 cspr = ifc_in32(&ifc_global->cspr_cs[bank].cspr); if (!(cspr & CSPR_V)) return 0; @@ -1024,7 +937,7 @@ static DEFINE_MUTEX(fsl_ifc_nand_mutex); static int fsl_ifc_nand_probe(struct platform_device *dev) { - struct fsl_ifc_regs __iomem *ifc; + struct fsl_ifc_runtime __iomem *ifc; struct fsl_ifc_mtd *priv; struct resource res; static const char *part_probe_types[] @@ -1034,9 +947,9 @@ static int fsl_ifc_nand_probe(struct platform_device *dev) struct device_node *node = dev->dev.of_node; struct mtd_info *mtd; - if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs) + if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->rregs) return -ENODEV; - ifc = fsl_ifc_ctrl_dev->regs; + ifc = fsl_ifc_ctrl_dev->rregs; /* get, allocate and map the memory resource */ ret = of_address_to_resource(node, 0, &res); @@ -1047,7 +960,7 @@ static int fsl_ifc_nand_probe(struct platform_device *dev) /* find which chip select it is connected to */ for (bank = 0; bank < fsl_ifc_ctrl_dev->banks; bank++) { - if (match_bank(ifc, bank, res.start)) + if (match_bank(fsl_ifc_ctrl_dev->gregs, bank, res.start)) break; } diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index cafd12de7276..d85fa2555b68 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -170,6 +170,7 @@ static int fun_chip_init(struct fsl_upm_nand *fun, fun->chip.read_buf = fun_read_buf; fun->chip.write_buf = fun_write_buf; fun->chip.ecc.mode = NAND_ECC_SOFT; + fun->chip.ecc.algo = NAND_ECC_HAMMING; if (fun->mchip_count > 1) fun->chip.select_chip = fun_select_chip; diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 1bdcd4fa26d4..d4f454a4b35e 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -39,210 +39,41 @@ #include <linux/amba/bus.h> #include <mtd/mtd-abi.h> -static struct nand_ecclayout fsmc_ecc1_128_layout = { - .eccbytes = 24, - .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52, - 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116}, - .oobfree = { - {.offset = 8, .length = 8}, - {.offset = 24, .length = 8}, - {.offset = 40, .length = 8}, - {.offset = 56, .length = 8}, - {.offset = 72, .length = 8}, - {.offset = 88, .length = 8}, - {.offset = 104, .length = 8}, - {.offset = 120, .length = 8} - } -}; +static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); -static struct nand_ecclayout fsmc_ecc1_64_layout = { - .eccbytes = 12, - .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52}, - .oobfree = { - {.offset = 8, .length = 8}, - {.offset = 24, .length = 8}, - {.offset = 40, .length = 8}, - {.offset = 56, .length = 8}, - } -}; + if (section >= chip->ecc.steps) + return -ERANGE; -static struct nand_ecclayout fsmc_ecc1_16_layout = { - .eccbytes = 3, - .eccpos = {2, 3, 4}, - .oobfree = { - {.offset = 8, .length = 8}, - } -}; + oobregion->offset = (section * 16) + 2; + oobregion->length = 3; -/* - * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes - * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46 - * bytes are free for use. - */ -static struct nand_ecclayout fsmc_ecc4_256_layout = { - .eccbytes = 208, - .eccpos = { 2, 3, 4, 5, 6, 7, 8, - 9, 10, 11, 12, 13, 14, - 18, 19, 20, 21, 22, 23, 24, - 25, 26, 27, 28, 29, 30, - 34, 35, 36, 37, 38, 39, 40, - 41, 42, 43, 44, 45, 46, - 50, 51, 52, 53, 54, 55, 56, - 57, 58, 59, 60, 61, 62, - 66, 67, 68, 69, 70, 71, 72, - 73, 74, 75, 76, 77, 78, - 82, 83, 84, 85, 86, 87, 88, - 89, 90, 91, 92, 93, 94, - 98, 99, 100, 101, 102, 103, 104, - 105, 106, 107, 108, 109, 110, - 114, 115, 116, 117, 118, 119, 120, - 121, 122, 123, 124, 125, 126, - 130, 131, 132, 133, 134, 135, 136, - 137, 138, 139, 140, 141, 142, - 146, 147, 148, 149, 150, 151, 152, - 153, 154, 155, 156, 157, 158, - 162, 163, 164, 165, 166, 167, 168, - 169, 170, 171, 172, 173, 174, - 178, 179, 180, 181, 182, 183, 184, - 185, 186, 187, 188, 189, 190, - 194, 195, 196, 197, 198, 199, 200, - 201, 202, 203, 204, 205, 206, - 210, 211, 212, 213, 214, 215, 216, - 217, 218, 219, 220, 221, 222, - 226, 227, 228, 229, 230, 231, 232, - 233, 234, 235, 236, 237, 238, - 242, 243, 244, 245, 246, 247, 248, - 249, 250, 251, 252, 253, 254 - }, - .oobfree = { - {.offset = 15, .length = 3}, - {.offset = 31, .length = 3}, - {.offset = 47, .length = 3}, - {.offset = 63, .length = 3}, - {.offset = 79, .length = 3}, - {.offset = 95, .length = 3}, - {.offset = 111, .length = 3}, - {.offset = 127, .length = 3}, - {.offset = 143, .length = 3}, - {.offset = 159, .length = 3}, - {.offset = 175, .length = 3}, - {.offset = 191, .length = 3}, - {.offset = 207, .length = 3}, - {.offset = 223, .length = 3}, - {.offset = 239, .length = 3}, - {.offset = 255, .length = 1} - } -}; + return 0; +} -/* - * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes - * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118 - * bytes are free for use. - */ -static struct nand_ecclayout fsmc_ecc4_224_layout = { - .eccbytes = 104, - .eccpos = { 2, 3, 4, 5, 6, 7, 8, - 9, 10, 11, 12, 13, 14, - 18, 19, 20, 21, 22, 23, 24, - 25, 26, 27, 28, 29, 30, - 34, 35, 36, 37, 38, 39, 40, - 41, 42, 43, 44, 45, 46, - 50, 51, 52, 53, 54, 55, 56, - 57, 58, 59, 60, 61, 62, - 66, 67, 68, 69, 70, 71, 72, - 73, 74, 75, 76, 77, 78, - 82, 83, 84, 85, 86, 87, 88, - 89, 90, 91, 92, 93, 94, - 98, 99, 100, 101, 102, 103, 104, - 105, 106, 107, 108, 109, 110, - 114, 115, 116, 117, 118, 119, 120, - 121, 122, 123, 124, 125, 126 - }, - .oobfree = { - {.offset = 15, .length = 3}, - {.offset = 31, .length = 3}, - {.offset = 47, .length = 3}, - {.offset = 63, .length = 3}, - {.offset = 79, .length = 3}, - {.offset = 95, .length = 3}, - {.offset = 111, .length = 3}, - {.offset = 127, .length = 97} - } -}; +static int fsmc_ecc1_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); -/* - * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes - * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22 - * bytes are free for use. - */ -static struct nand_ecclayout fsmc_ecc4_128_layout = { - .eccbytes = 104, - .eccpos = { 2, 3, 4, 5, 6, 7, 8, - 9, 10, 11, 12, 13, 14, - 18, 19, 20, 21, 22, 23, 24, - 25, 26, 27, 28, 29, 30, - 34, 35, 36, 37, 38, 39, 40, - 41, 42, 43, 44, 45, 46, - 50, 51, 52, 53, 54, 55, 56, - 57, 58, 59, 60, 61, 62, - 66, 67, 68, 69, 70, 71, 72, - 73, 74, 75, 76, 77, 78, - 82, 83, 84, 85, 86, 87, 88, - 89, 90, 91, 92, 93, 94, - 98, 99, 100, 101, 102, 103, 104, - 105, 106, 107, 108, 109, 110, - 114, 115, 116, 117, 118, 119, 120, - 121, 122, 123, 124, 125, 126 - }, - .oobfree = { - {.offset = 15, .length = 3}, - {.offset = 31, .length = 3}, - {.offset = 47, .length = 3}, - {.offset = 63, .length = 3}, - {.offset = 79, .length = 3}, - {.offset = 95, .length = 3}, - {.offset = 111, .length = 3}, - {.offset = 127, .length = 1} - } -}; + if (section >= chip->ecc.steps) + return -ERANGE; -/* - * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of - * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10 - * bytes are free for use. - */ -static struct nand_ecclayout fsmc_ecc4_64_layout = { - .eccbytes = 52, - .eccpos = { 2, 3, 4, 5, 6, 7, 8, - 9, 10, 11, 12, 13, 14, - 18, 19, 20, 21, 22, 23, 24, - 25, 26, 27, 28, 29, 30, - 34, 35, 36, 37, 38, 39, 40, - 41, 42, 43, 44, 45, 46, - 50, 51, 52, 53, 54, 55, 56, - 57, 58, 59, 60, 61, 62, - }, - .oobfree = { - {.offset = 15, .length = 3}, - {.offset = 31, .length = 3}, - {.offset = 47, .length = 3}, - {.offset = 63, .length = 1}, - } -}; + oobregion->offset = (section * 16) + 8; -/* - * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of - * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One - * byte is free for use. - */ -static struct nand_ecclayout fsmc_ecc4_16_layout = { - .eccbytes = 13, - .eccpos = { 0, 1, 2, 3, 6, 7, 8, - 9, 10, 11, 12, 13, 14 - }, - .oobfree = { - {.offset = 15, .length = 1}, - } + if (section < chip->ecc.steps - 1) + oobregion->length = 8; + else + oobregion->length = mtd->oobsize - oobregion->offset; + + return 0; +} + +static const struct mtd_ooblayout_ops fsmc_ecc1_ooblayout_ops = { + .ecc = fsmc_ecc1_ooblayout_ecc, + .free = fsmc_ecc1_ooblayout_free, }; /* @@ -250,28 +81,46 @@ static struct nand_ecclayout fsmc_ecc4_16_layout = { * There are 13 bytes of ecc for every 512 byte block and it has to be read * consecutively and immediately after the 512 byte data block for hardware to * generate the error bit offsets in 512 byte data. - * Managing the ecc bytes in the following way makes it easier for software to - * read ecc bytes consecutive to data bytes. This way is similar to - * oobfree structure maintained already in generic nand driver */ -static struct fsmc_eccplace fsmc_ecc4_lp_place = { - .eccplace = { - {.offset = 2, .length = 13}, - {.offset = 18, .length = 13}, - {.offset = 34, .length = 13}, - {.offset = 50, .length = 13}, - {.offset = 66, .length = 13}, - {.offset = 82, .length = 13}, - {.offset = 98, .length = 13}, - {.offset = 114, .length = 13} - } -}; +static int fsmc_ecc4_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); -static struct fsmc_eccplace fsmc_ecc4_sp_place = { - .eccplace = { - {.offset = 0, .length = 4}, - {.offset = 6, .length = 9} - } + if (section >= chip->ecc.steps) + return -ERANGE; + + oobregion->length = chip->ecc.bytes; + + if (!section && mtd->writesize <= 512) + oobregion->offset = 0; + else + oobregion->offset = (section * 16) + 2; + + return 0; +} + +static int fsmc_ecc4_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + + if (section >= chip->ecc.steps) + return -ERANGE; + + oobregion->offset = (section * 16) + 15; + + if (section < chip->ecc.steps - 1) + oobregion->length = 3; + else + oobregion->length = mtd->oobsize - oobregion->offset; + + return 0; +} + +static const struct mtd_ooblayout_ops fsmc_ecc4_ooblayout_ops = { + .ecc = fsmc_ecc4_ooblayout_ecc, + .free = fsmc_ecc4_ooblayout_free, }; /** @@ -283,7 +132,6 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = { * @partitions: Partition info for a NAND Flash. * @nr_partitions: Total number of partition of a NAND flash. * - * @ecc_place: ECC placing locations in oobfree type format. * @bank: Bank number for probed device. * @clk: Clock structure for FSMC. * @@ -303,7 +151,6 @@ struct fsmc_nand_data { struct mtd_partition *partitions; unsigned int nr_partitions; - struct fsmc_eccplace *ecc_place; unsigned int bank; struct device *dev; enum access_mode mode; @@ -710,8 +557,6 @@ static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf, static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { - struct fsmc_nand_data *host = mtd_to_fsmc(mtd); - struct fsmc_eccplace *ecc_place = host->ecc_place; int i, j, s, stat, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; @@ -734,9 +579,15 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, chip->read_buf(mtd, p, eccsize); for (j = 0; j < eccbytes;) { - off = ecc_place->eccplace[group].offset; - len = ecc_place->eccplace[group].length; - group++; + struct mtd_oob_region oobregion; + int ret; + + ret = mtd_ooblayout_ecc(mtd, group++, &oobregion); + if (ret) + return ret; + + off = oobregion.offset; + len = oobregion.length; /* * length is intentionally kept a higher multiple of 2 @@ -1084,24 +935,10 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (AMBA_REV_BITS(host->pid) >= 8) { switch (mtd->oobsize) { case 16: - nand->ecc.layout = &fsmc_ecc4_16_layout; - host->ecc_place = &fsmc_ecc4_sp_place; - break; case 64: - nand->ecc.layout = &fsmc_ecc4_64_layout; - host->ecc_place = &fsmc_ecc4_lp_place; - break; case 128: - nand->ecc.layout = &fsmc_ecc4_128_layout; - host->ecc_place = &fsmc_ecc4_lp_place; - break; case 224: - nand->ecc.layout = &fsmc_ecc4_224_layout; - host->ecc_place = &fsmc_ecc4_lp_place; - break; case 256: - nand->ecc.layout = &fsmc_ecc4_256_layout; - host->ecc_place = &fsmc_ecc4_lp_place; break; default: dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n", @@ -1109,6 +946,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) ret = -EINVAL; goto err_probe; } + + mtd_set_ooblayout(mtd, &fsmc_ecc4_ooblayout_ops); } else { switch (nand->ecc.mode) { case NAND_ECC_HW: @@ -1119,9 +958,11 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) nand->ecc.strength = 1; break; - case NAND_ECC_SOFT_BCH: - dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n"); - break; + case NAND_ECC_SOFT: + if (nand->ecc.algo == NAND_ECC_BCH) { + dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n"); + break; + } default: dev_err(&pdev->dev, "Unsupported ECC mode!\n"); @@ -1132,16 +973,13 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) * Don't set layout for BCH4 SW ECC. This will be * generated later in nand_bch_init() later. */ - if (nand->ecc.mode != NAND_ECC_SOFT_BCH) { + if (nand->ecc.mode == NAND_ECC_HW) { switch (mtd->oobsize) { case 16: - nand->ecc.layout = &fsmc_ecc1_16_layout; - break; case 64: - nand->ecc.layout = &fsmc_ecc1_64_layout; - break; case 128: - nand->ecc.layout = &fsmc_ecc1_128_layout; + mtd_set_ooblayout(mtd, + &fsmc_ecc1_ooblayout_ops); break; default: dev_warn(&pdev->dev, diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c index ded658fc7d73..6317f6836022 100644 --- a/drivers/mtd/nand/gpio.c +++ b/drivers/mtd/nand/gpio.c @@ -273,6 +273,7 @@ static int gpio_nand_probe(struct platform_device *pdev) nand_set_flash_node(chip, pdev->dev.of_node); chip->IO_ADDR_W = chip->IO_ADDR_R; chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_HAMMING; chip->options = gpiomtd->plat.options; chip->chip_delay = gpiomtd->plat.chip_delay; chip->cmd_ctrl = gpio_nand_cmd_ctrl; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 8122c699ccf2..6e461560c6a8 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -25,7 +25,6 @@ #include <linux/mtd/partitions.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_mtd.h> #include "gpmi-nand.h" #include "bch-regs.h" @@ -47,10 +46,44 @@ static struct nand_bbt_descr gpmi_bbt_descr = { * We may change the layout if we can get the ECC info from the datasheet, * else we will use all the (page + OOB). */ -static struct nand_ecclayout gpmi_hw_ecclayout = { - .eccbytes = 0, - .eccpos = { 0, }, - .oobfree = { {.offset = 0, .length = 0} } +static int gpmi_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct gpmi_nand_data *this = nand_get_controller_data(chip); + struct bch_geometry *geo = &this->bch_geometry; + + if (section) + return -ERANGE; + + oobregion->offset = 0; + oobregion->length = geo->page_size - mtd->writesize; + + return 0; +} + +static int gpmi_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct gpmi_nand_data *this = nand_get_controller_data(chip); + struct bch_geometry *geo = &this->bch_geometry; + + if (section) + return -ERANGE; + + /* The available oob size we have. */ + if (geo->page_size < mtd->writesize + mtd->oobsize) { + oobregion->offset = geo->page_size - mtd->writesize; + oobregion->length = mtd->oobsize - oobregion->offset; + } + + return 0; +} + +static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = { + .ecc = gpmi_ooblayout_ecc, + .free = gpmi_ooblayout_free, }; static const struct gpmi_devdata gpmi_devdata_imx23 = { @@ -141,7 +174,6 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this) struct bch_geometry *geo = &this->bch_geometry; struct nand_chip *chip = &this->nand; struct mtd_info *mtd = nand_to_mtd(chip); - struct nand_oobfree *of = gpmi_hw_ecclayout.oobfree; unsigned int block_mark_bit_offset; if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0)) @@ -229,12 +261,6 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this) geo->page_size = mtd->writesize + geo->metadata_size + (geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8; - /* The available oob size we have. */ - if (geo->page_size < mtd->writesize + mtd->oobsize) { - of->offset = geo->page_size - mtd->writesize; - of->length = mtd->oobsize - of->offset; - } - geo->payload_size = mtd->writesize; geo->auxiliary_status_offset = ALIGN(geo->metadata_size, 4); @@ -797,6 +823,7 @@ static void gpmi_free_dma_buffer(struct gpmi_nand_data *this) this->cmd_buffer = NULL; this->data_buffer_dma = NULL; + this->raw_buffer = NULL; this->page_buffer_virt = NULL; this->page_buffer_size = 0; } @@ -1037,14 +1064,87 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, /* Loop over status bytes, accumulating ECC status. */ status = auxiliary_virt + nfc_geo->auxiliary_status_offset; + read_page_swap_end(this, buf, nfc_geo->payload_size, + this->payload_virt, this->payload_phys, + nfc_geo->payload_size, + payload_virt, payload_phys); + for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) { if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED)) continue; if (*status == STATUS_UNCORRECTABLE) { + int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len; + u8 *eccbuf = this->raw_buffer; + int offset, bitoffset; + int eccbytes; + int flips; + + /* Read ECC bytes into our internal raw_buffer */ + offset = nfc_geo->metadata_size * 8; + offset += ((8 * nfc_geo->ecc_chunk_size) + eccbits) * (i + 1); + offset -= eccbits; + bitoffset = offset % 8; + eccbytes = DIV_ROUND_UP(offset + eccbits, 8); + offset /= 8; + eccbytes -= offset; + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); + chip->read_buf(mtd, eccbuf, eccbytes); + + /* + * ECC data are not byte aligned and we may have + * in-band data in the first and last byte of + * eccbuf. Set non-eccbits to one so that + * nand_check_erased_ecc_chunk() does not count them + * as bitflips. + */ + if (bitoffset) + eccbuf[0] |= GENMASK(bitoffset - 1, 0); + + bitoffset = (bitoffset + eccbits) % 8; + if (bitoffset) + eccbuf[eccbytes - 1] |= GENMASK(7, bitoffset); + + /* + * The ECC hardware has an uncorrectable ECC status + * code in case we have bitflips in an erased page. As + * nothing was written into this subpage the ECC is + * obviously wrong and we can not trust it. We assume + * at this point that we are reading an erased page and + * try to correct the bitflips in buffer up to + * ecc_strength bitflips. If this is a page with random + * data, we exceed this number of bitflips and have a + * ECC failure. Otherwise we use the corrected buffer. + */ + if (i == 0) { + /* The first block includes metadata */ + flips = nand_check_erased_ecc_chunk( + buf + i * nfc_geo->ecc_chunk_size, + nfc_geo->ecc_chunk_size, + eccbuf, eccbytes, + auxiliary_virt, + nfc_geo->metadata_size, + nfc_geo->ecc_strength); + } else { + flips = nand_check_erased_ecc_chunk( + buf + i * nfc_geo->ecc_chunk_size, + nfc_geo->ecc_chunk_size, + eccbuf, eccbytes, + NULL, 0, + nfc_geo->ecc_strength); + } + + if (flips > 0) { + max_bitflips = max_t(unsigned int, max_bitflips, + flips); + mtd->ecc_stats.corrected += flips; + continue; + } + mtd->ecc_stats.failed++; continue; } + mtd->ecc_stats.corrected += *status; max_bitflips = max_t(unsigned int, max_bitflips, *status); } @@ -1064,11 +1164,6 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; } - read_page_swap_end(this, buf, nfc_geo->payload_size, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - payload_virt, payload_phys); - return max_bitflips; } @@ -1327,18 +1422,19 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, static int gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) { - struct nand_oobfree *of = mtd->ecclayout->oobfree; + struct mtd_oob_region of = { }; int status = 0; /* Do we have available oob area? */ - if (!of->length) + mtd_ooblayout_free(mtd, 0, &of); + if (!of.length) return -EPERM; if (!nand_is_slc(chip)) return -EPERM; - chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page); - chip->write_buf(mtd, chip->oob_poi + of->offset, of->length); + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of.offset, page); + chip->write_buf(mtd, chip->oob_poi + of.offset, of.length); chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); status = chip->waitfunc(mtd, chip); @@ -1840,6 +1936,7 @@ static void gpmi_nand_exit(struct gpmi_nand_data *this) static int gpmi_init_last(struct gpmi_nand_data *this) { struct nand_chip *chip = &this->nand; + struct mtd_info *mtd = nand_to_mtd(chip); struct nand_ecc_ctrl *ecc = &chip->ecc; struct bch_geometry *bch_geo = &this->bch_geometry; int ret; @@ -1861,7 +1958,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this) ecc->mode = NAND_ECC_HW; ecc->size = bch_geo->ecc_chunk_size; ecc->strength = bch_geo->ecc_strength; - ecc->layout = &gpmi_hw_ecclayout; + mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops); /* * We only enable the subpage read when: @@ -1914,16 +2011,6 @@ static int gpmi_nand_init(struct gpmi_nand_data *this) /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */ this->swap_block_mark = !GPMI_IS_MX23(this); - if (of_get_nand_on_flash_bbt(this->dev->of_node)) { - chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; - - if (of_property_read_bool(this->dev->of_node, - "fsl,no-blockmark-swap")) - this->swap_block_mark = false; - } - dev_dbg(this->dev, "Blockmark swapping %sabled\n", - this->swap_block_mark ? "en" : "dis"); - /* * Allocate a temporary DMA buffer for reading ID in the * nand_scan_ident(). @@ -1938,6 +2025,16 @@ static int gpmi_nand_init(struct gpmi_nand_data *this) if (ret) goto err_out; + if (chip->bbt_options & NAND_BBT_USE_FLASH) { + chip->bbt_options |= NAND_BBT_NO_OOB; + + if (of_property_read_bool(this->dev->of_node, + "fsl,no-blockmark-swap")) + this->swap_block_mark = false; + } + dev_dbg(this->dev, "Blockmark swapping %sabled\n", + this->swap_block_mark ? "en" : "dis"); + ret = gpmi_init_last(this); if (ret) goto err_out; diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c index 96502b624cfb..9432546f4cd4 100644 --- a/drivers/mtd/nand/hisi504_nand.c +++ b/drivers/mtd/nand/hisi504_nand.c @@ -19,7 +19,6 @@ * GNU General Public License for more details. */ #include <linux/of.h> -#include <linux/of_mtd.h> #include <linux/mtd/mtd.h> #include <linux/sizes.h> #include <linux/clk.h> @@ -631,8 +630,28 @@ static void hisi_nfc_host_init(struct hinfc_host *host) hinfc_write(host, HINFC504_INTEN_DMA, HINFC504_INTEN); } -static struct nand_ecclayout nand_ecc_2K_16bits = { - .oobfree = { {2, 6} }, +static int hisi_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + /* FIXME: add ECC bytes position */ + return -ENOTSUPP; +} + +static int hisi_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 2; + oobregion->length = 6; + + return 0; +} + +static const struct mtd_ooblayout_ops hisi_ooblayout_ops = { + .ecc = hisi_ooblayout_ecc, + .free = hisi_ooblayout_free, }; static int hisi_nfc_ecc_probe(struct hinfc_host *host) @@ -642,10 +661,9 @@ static int hisi_nfc_ecc_probe(struct hinfc_host *host) struct device *dev = host->dev; struct nand_chip *chip = &host->chip; struct mtd_info *mtd = nand_to_mtd(chip); - struct device_node *np = host->dev->of_node; - size = of_get_nand_ecc_step_size(np); - strength = of_get_nand_ecc_strength(np); + size = chip->ecc.size; + strength = chip->ecc.strength; if (size != 1024) { dev_err(dev, "error ecc size: %d\n", size); return -EINVAL; @@ -668,7 +686,7 @@ static int hisi_nfc_ecc_probe(struct hinfc_host *host) case 16: ecc_bits = 6; if (mtd->writesize == 2048) - chip->ecc.layout = &nand_ecc_2K_16bits; + mtd_set_ooblayout(mtd, &hisi_ooblayout_ops); /* TODO: add more page size support */ break; @@ -695,7 +713,7 @@ static int hisi_nfc_ecc_probe(struct hinfc_host *host) static int hisi_nfc_probe(struct platform_device *pdev) { - int ret = 0, irq, buswidth, flag, max_chips = HINFC504_MAX_CHIP; + int ret = 0, irq, flag, max_chips = HINFC504_MAX_CHIP; struct device *dev = &pdev->dev; struct hinfc_host *host; struct nand_chip *chip; @@ -747,12 +765,6 @@ static int hisi_nfc_probe(struct platform_device *pdev) chip->read_buf = hisi_nfc_read_buf; chip->chip_delay = HINFC504_CHIP_DELAY; - chip->ecc.mode = of_get_nand_ecc_mode(np); - - buswidth = of_get_nand_bus_width(np); - if (buswidth == 16) - chip->options |= NAND_BUSWIDTH_16; - hisi_nfc_host_init(host); ret = devm_request_irq(dev, irq, hinfc_irq_handle, 0x0, "nandc", host); diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index 673ceb2a0b44..5551c36adbdf 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -221,7 +221,6 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat, struct jz_nand *nand = mtd_to_jz_nand(mtd); int i, error_count, index; uint32_t reg, status, error; - uint32_t t; unsigned int timeout = 1000; for (i = 0; i < 9; ++i) @@ -476,7 +475,7 @@ static int jz_nand_probe(struct platform_device *pdev) } if (pdata && pdata->ident_callback) { - pdata->ident_callback(pdev, chip, &pdata->partitions, + pdata->ident_callback(pdev, mtd, &pdata->partitions, &pdata->num_partitions); } diff --git a/drivers/mtd/nand/jz4780_bch.c b/drivers/mtd/nand/jz4780_bch.c index 755499c6650e..d74f4ba4a6f4 100644 --- a/drivers/mtd/nand/jz4780_bch.c +++ b/drivers/mtd/nand/jz4780_bch.c @@ -287,7 +287,6 @@ static struct jz4780_bch *jz4780_bch_get(struct device_node *np) bch = platform_get_drvdata(pdev); clk_prepare_enable(bch->clk); - bch->dev = &pdev->dev; return bch; } diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c index e1c016c9d32d..daf3c4217f4d 100644 --- a/drivers/mtd/nand/jz4780_nand.c +++ b/drivers/mtd/nand/jz4780_nand.c @@ -17,7 +17,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/gpio/consumer.h> -#include <linux/of_mtd.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/mtd/mtd.h> @@ -56,8 +55,6 @@ struct jz4780_nand_chip { struct nand_chip chip; struct list_head chip_list; - struct nand_ecclayout ecclayout; - struct gpio_desc *busy_gpio; struct gpio_desc *wp_gpio; unsigned int reading: 1; @@ -165,8 +162,7 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de struct nand_chip *chip = &nand->chip; struct mtd_info *mtd = nand_to_mtd(chip); struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller); - struct nand_ecclayout *layout = &nand->ecclayout; - u32 start, i; + int eccbytes; chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) * (chip->ecc.strength / 8); @@ -183,7 +179,6 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de chip->ecc.correct = jz4780_nand_ecc_correct; /* fall through */ case NAND_ECC_SOFT: - case NAND_ECC_SOFT_BCH: dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n", (nfc->bch) ? "hardware BCH" : "software ECC", chip->ecc.strength, chip->ecc.size, chip->ecc.bytes); @@ -201,23 +196,17 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de return 0; /* Generate ECC layout. ECC codes are right aligned in the OOB area. */ - layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes; + eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes; - if (layout->eccbytes > mtd->oobsize - 2) { + if (eccbytes > mtd->oobsize - 2) { dev_err(dev, "invalid ECC config: required %d ECC bytes, but only %d are available", - layout->eccbytes, mtd->oobsize - 2); + eccbytes, mtd->oobsize - 2); return -EINVAL; } - start = mtd->oobsize - layout->eccbytes; - for (i = 0; i < layout->eccbytes; i++) - layout->eccpos[i] = start + i; - - layout->oobfree[0].offset = 2; - layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2; + mtd->ooblayout = &nand_ooblayout_lp_ops; - chip->ecc.layout = layout; return 0; } diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c index d8c3e7afcc0b..852388171f20 100644 --- a/drivers/mtd/nand/lpc32xx_mlc.c +++ b/drivers/mtd/nand/lpc32xx_mlc.c @@ -35,7 +35,6 @@ #include <linux/completion.h> #include <linux/interrupt.h> #include <linux/of.h> -#include <linux/of_mtd.h> #include <linux/of_gpio.h> #include <linux/mtd/lpc32xx_mlc.h> #include <linux/io.h> @@ -139,22 +138,37 @@ struct lpc32xx_nand_cfg_mlc { unsigned num_parts; }; -static struct nand_ecclayout lpc32xx_nand_oob = { - .eccbytes = 40, - .eccpos = { 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, - 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, - 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, - 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 }, - .oobfree = { - { .offset = 0, - .length = 6, }, - { .offset = 16, - .length = 6, }, - { .offset = 32, - .length = 6, }, - { .offset = 48, - .length = 6, }, - }, +static int lpc32xx_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *nand_chip = mtd_to_nand(mtd); + + if (section >= nand_chip->ecc.steps) + return -ERANGE; + + oobregion->offset = ((section + 1) * 16) - nand_chip->ecc.bytes; + oobregion->length = nand_chip->ecc.bytes; + + return 0; +} + +static int lpc32xx_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *nand_chip = mtd_to_nand(mtd); + + if (section >= nand_chip->ecc.steps) + return -ERANGE; + + oobregion->offset = 16 * section; + oobregion->length = 16 - nand_chip->ecc.bytes; + + return 0; +} + +static const struct mtd_ooblayout_ops lpc32xx_ooblayout_ops = { + .ecc = lpc32xx_ooblayout_ecc, + .free = lpc32xx_ooblayout_free, }; static struct nand_bbt_descr lpc32xx_nand_bbt = { @@ -713,6 +727,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) nand_chip->ecc.write_oob = lpc32xx_write_oob; nand_chip->ecc.read_oob = lpc32xx_read_oob; nand_chip->ecc.strength = 4; + nand_chip->ecc.bytes = 10; nand_chip->waitfunc = lpc32xx_waitfunc; nand_chip->options = NAND_NO_SUBPAGE_WRITE; @@ -751,7 +766,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) nand_chip->ecc.mode = NAND_ECC_HW; nand_chip->ecc.size = 512; - nand_chip->ecc.layout = &lpc32xx_nand_oob; + mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops); host->mlcsubpages = mtd->writesize / 512; /* initially clear interrupt status */ diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c index 3b8f3735f3e8..8d3edc34958e 100644 --- a/drivers/mtd/nand/lpc32xx_slc.c +++ b/drivers/mtd/nand/lpc32xx_slc.c @@ -35,7 +35,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/gpio.h> #include <linux/of.h> -#include <linux/of_mtd.h> #include <linux/of_gpio.h> #include <linux/mtd/lpc32xx_slc.h> @@ -146,13 +145,38 @@ * NAND ECC Layout for small page NAND devices * Note: For large and huge page devices, the default layouts are used */ -static struct nand_ecclayout lpc32xx_nand_oob_16 = { - .eccbytes = 6, - .eccpos = {10, 11, 12, 13, 14, 15}, - .oobfree = { - { .offset = 0, .length = 4 }, - { .offset = 6, .length = 4 }, - }, +static int lpc32xx_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->length = 6; + oobregion->offset = 10; + + return 0; +} + +static int lpc32xx_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 1) + return -ERANGE; + + if (!section) { + oobregion->offset = 0; + oobregion->length = 4; + } else { + oobregion->offset = 6; + oobregion->length = 4; + } + + return 0; +} + +static const struct mtd_ooblayout_ops lpc32xx_ooblayout_ops = { + .ecc = lpc32xx_ooblayout_ecc, + .free = lpc32xx_ooblayout_free, }; static u8 bbt_pattern[] = {'B', 'b', 't', '0' }; @@ -194,7 +218,6 @@ struct lpc32xx_nand_cfg_slc { uint32_t rwidth; uint32_t rhold; uint32_t rsetup; - bool use_bbt; int wp_gpio; struct mtd_partition *parts; unsigned num_parts; @@ -604,7 +627,8 @@ static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd, int oob_required, int page) { struct lpc32xx_nand_host *host = nand_get_controller_data(chip); - int stat, i, status; + struct mtd_oob_region oobregion = { }; + int stat, i, status, error; uint8_t *oobecc, tmpecc[LPC32XX_ECC_SAVE_SIZE]; /* Issue read command */ @@ -620,7 +644,11 @@ static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd, lpc32xx_slc_ecc_copy(tmpecc, (uint32_t *) host->ecc_buf, chip->ecc.steps); /* Pointer to ECC data retrieved from NAND spare area */ - oobecc = chip->oob_poi + chip->ecc.layout->eccpos[0]; + error = mtd_ooblayout_ecc(mtd, 0, &oobregion); + if (error) + return error; + + oobecc = chip->oob_poi + oobregion.offset; for (i = 0; i < chip->ecc.steps; i++) { stat = chip->ecc.correct(mtd, buf, oobecc, @@ -666,7 +694,8 @@ static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd, int oob_required, int page) { struct lpc32xx_nand_host *host = nand_get_controller_data(chip); - uint8_t *pb = chip->oob_poi + chip->ecc.layout->eccpos[0]; + struct mtd_oob_region oobregion = { }; + uint8_t *pb; int error; /* Write data, calculate ECC on outbound data */ @@ -678,6 +707,11 @@ static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd, * The calculated ECC needs some manual work done to it before * committing it to NAND. Process the calculated ECC and place * the resultant values directly into the OOB buffer. */ + error = mtd_ooblayout_ecc(mtd, 0, &oobregion); + if (error) + return error; + + pb = chip->oob_poi + oobregion.offset; lpc32xx_slc_ecc_copy(pb, (uint32_t *)host->ecc_buf, chip->ecc.steps); /* Write ECC data to device */ @@ -747,7 +781,6 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev) return NULL; } - ncfg->use_bbt = of_get_nand_on_flash_bbt(np); ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0); return ncfg; @@ -875,26 +908,22 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) * custom BBT marker layout. */ if (mtd->writesize <= 512) - chip->ecc.layout = &lpc32xx_nand_oob_16; + mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops); /* These sizes remain the same regardless of page size */ chip->ecc.size = 256; chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES; chip->ecc.prepad = chip->ecc.postpad = 0; - /* Avoid extra scan if using BBT, setup BBT support */ - if (host->ncfg->use_bbt) { - chip->bbt_options |= NAND_BBT_USE_FLASH; - - /* - * Use a custom BBT marker setup for small page FLASH that - * won't interfere with the ECC layout. Large and huge page - * FLASH use the standard layout. - */ - if (mtd->writesize <= 512) { - chip->bbt_td = &bbt_smallpage_main_descr; - chip->bbt_md = &bbt_smallpage_mirror_descr; - } + /* + * Use a custom BBT marker setup for small page FLASH that + * won't interfere with the ECC layout. Large and huge page + * FLASH use the standard layout. + */ + if ((chip->bbt_options & NAND_BBT_USE_FLASH) && + mtd->writesize <= 512) { + chip->bbt_td = &bbt_smallpage_main_descr; + chip->bbt_md = &bbt_smallpage_mirror_descr; } /* diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 5d7843ffff6a..7eacb2f545f5 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -710,6 +710,7 @@ static int mpc5121_nfc_probe(struct platform_device *op) chip->select_chip = mpc5121_nfc_select_chip; chip->bbt_options = NAND_BBT_USE_FLASH; chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_HAMMING; /* Support external chip-select logic on ADS5121 board */ if (of_machine_is_compatible("fsl,mpc5121ads")) { diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 854c832597aa..5173fadc9a4e 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -34,7 +34,6 @@ #include <linux/completion.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_mtd.h> #include <asm/mach/flash.h> #include <linux/platform_data/mtd-mxc_nand.h> @@ -149,7 +148,7 @@ struct mxc_nand_devtype_data { int (*check_int)(struct mxc_nand_host *); void (*irq_control)(struct mxc_nand_host *, int); u32 (*get_ecc_status)(struct mxc_nand_host *); - struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k; + const struct mtd_ooblayout_ops *ooblayout; void (*select_chip)(struct mtd_info *mtd, int chip); int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); @@ -200,73 +199,6 @@ struct mxc_nand_host { struct mxc_nand_platform_data pdata; }; -/* OOB placement block for use with hardware ecc generation */ -static struct nand_ecclayout nandv1_hw_eccoob_smallpage = { - .eccbytes = 5, - .eccpos = {6, 7, 8, 9, 10}, - .oobfree = {{0, 5}, {12, 4}, } -}; - -static struct nand_ecclayout nandv1_hw_eccoob_largepage = { - .eccbytes = 20, - .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26, - 38, 39, 40, 41, 42, 54, 55, 56, 57, 58}, - .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, } -}; - -/* OOB description for 512 byte pages with 16 byte OOB */ -static struct nand_ecclayout nandv2_hw_eccoob_smallpage = { - .eccbytes = 1 * 9, - .eccpos = { - 7, 8, 9, 10, 11, 12, 13, 14, 15 - }, - .oobfree = { - {.offset = 0, .length = 5} - } -}; - -/* OOB description for 2048 byte pages with 64 byte OOB */ -static struct nand_ecclayout nandv2_hw_eccoob_largepage = { - .eccbytes = 4 * 9, - .eccpos = { - 7, 8, 9, 10, 11, 12, 13, 14, 15, - 23, 24, 25, 26, 27, 28, 29, 30, 31, - 39, 40, 41, 42, 43, 44, 45, 46, 47, - 55, 56, 57, 58, 59, 60, 61, 62, 63 - }, - .oobfree = { - {.offset = 2, .length = 4}, - {.offset = 16, .length = 7}, - {.offset = 32, .length = 7}, - {.offset = 48, .length = 7} - } -}; - -/* OOB description for 4096 byte pages with 128 byte OOB */ -static struct nand_ecclayout nandv2_hw_eccoob_4k = { - .eccbytes = 8 * 9, - .eccpos = { - 7, 8, 9, 10, 11, 12, 13, 14, 15, - 23, 24, 25, 26, 27, 28, 29, 30, 31, - 39, 40, 41, 42, 43, 44, 45, 46, 47, - 55, 56, 57, 58, 59, 60, 61, 62, 63, - 71, 72, 73, 74, 75, 76, 77, 78, 79, - 87, 88, 89, 90, 91, 92, 93, 94, 95, - 103, 104, 105, 106, 107, 108, 109, 110, 111, - 119, 120, 121, 122, 123, 124, 125, 126, 127, - }, - .oobfree = { - {.offset = 2, .length = 4}, - {.offset = 16, .length = 7}, - {.offset = 32, .length = 7}, - {.offset = 48, .length = 7}, - {.offset = 64, .length = 7}, - {.offset = 80, .length = 7}, - {.offset = 96, .length = 7}, - {.offset = 112, .length = 7}, - } -}; - static const char * const part_probes[] = { "cmdlinepart", "RedBoot", "ofpart", NULL }; @@ -942,6 +874,99 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) } } +static int mxc_v1_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *nand_chip = mtd_to_nand(mtd); + + if (section >= nand_chip->ecc.steps) + return -ERANGE; + + oobregion->offset = (section * 16) + 6; + oobregion->length = nand_chip->ecc.bytes; + + return 0; +} + +static int mxc_v1_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *nand_chip = mtd_to_nand(mtd); + + if (section > nand_chip->ecc.steps) + return -ERANGE; + + if (!section) { + if (mtd->writesize <= 512) { + oobregion->offset = 0; + oobregion->length = 5; + } else { + oobregion->offset = 2; + oobregion->length = 4; + } + } else { + oobregion->offset = ((section - 1) * 16) + + nand_chip->ecc.bytes + 6; + if (section < nand_chip->ecc.steps) + oobregion->length = (section * 16) + 6 - + oobregion->offset; + else + oobregion->length = mtd->oobsize - oobregion->offset; + } + + return 0; +} + +static const struct mtd_ooblayout_ops mxc_v1_ooblayout_ops = { + .ecc = mxc_v1_ooblayout_ecc, + .free = mxc_v1_ooblayout_free, +}; + +static int mxc_v2_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *nand_chip = mtd_to_nand(mtd); + int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26; + + if (section >= nand_chip->ecc.steps) + return -ERANGE; + + oobregion->offset = (section * stepsize) + 7; + oobregion->length = nand_chip->ecc.bytes; + + return 0; +} + +static int mxc_v2_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *nand_chip = mtd_to_nand(mtd); + int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26; + + if (section > nand_chip->ecc.steps) + return -ERANGE; + + if (!section) { + if (mtd->writesize <= 512) { + oobregion->offset = 0; + oobregion->length = 5; + } else { + oobregion->offset = 2; + oobregion->length = 4; + } + } else { + oobregion->offset = section * stepsize; + oobregion->length = 7; + } + + return 0; +} + +static const struct mtd_ooblayout_ops mxc_v2_ooblayout_ops = { + .ecc = mxc_v2_ooblayout_ecc, + .free = mxc_v2_ooblayout_free, +}; + /* * v2 and v3 type controllers can do 4bit or 8bit ecc depending * on how much oob the nand chip has. For 8bit ecc we need at least @@ -959,23 +984,6 @@ static int get_eccsize(struct mtd_info *mtd) return 8; } -static void ecc_8bit_layout_4k(struct nand_ecclayout *layout) -{ - int i, j; - - layout->eccbytes = 8*18; - for (i = 0; i < 8; i++) - for (j = 0; j < 18; j++) - layout->eccpos[i*18 + j] = i*26 + j + 7; - - layout->oobfree[0].offset = 2; - layout->oobfree[0].length = 4; - for (i = 1; i < 8; i++) { - layout->oobfree[i].offset = i*26; - layout->oobfree[i].length = 7; - } -} - static void preset_v1(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd_to_nand(mtd); @@ -1269,9 +1277,7 @@ static const struct mxc_nand_devtype_data imx21_nand_devtype_data = { .check_int = check_int_v1_v2, .irq_control = irq_control_v1_v2, .get_ecc_status = get_ecc_status_v1, - .ecclayout_512 = &nandv1_hw_eccoob_smallpage, - .ecclayout_2k = &nandv1_hw_eccoob_largepage, - .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */ + .ooblayout = &mxc_v1_ooblayout_ops, .select_chip = mxc_nand_select_chip_v1_v3, .correct_data = mxc_nand_correct_data_v1, .irqpending_quirk = 1, @@ -1294,9 +1300,7 @@ static const struct mxc_nand_devtype_data imx27_nand_devtype_data = { .check_int = check_int_v1_v2, .irq_control = irq_control_v1_v2, .get_ecc_status = get_ecc_status_v1, - .ecclayout_512 = &nandv1_hw_eccoob_smallpage, - .ecclayout_2k = &nandv1_hw_eccoob_largepage, - .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */ + .ooblayout = &mxc_v1_ooblayout_ops, .select_chip = mxc_nand_select_chip_v1_v3, .correct_data = mxc_nand_correct_data_v1, .irqpending_quirk = 0, @@ -1320,9 +1324,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = { .check_int = check_int_v1_v2, .irq_control = irq_control_v1_v2, .get_ecc_status = get_ecc_status_v2, - .ecclayout_512 = &nandv2_hw_eccoob_smallpage, - .ecclayout_2k = &nandv2_hw_eccoob_largepage, - .ecclayout_4k = &nandv2_hw_eccoob_4k, + .ooblayout = &mxc_v2_ooblayout_ops, .select_chip = mxc_nand_select_chip_v2, .correct_data = mxc_nand_correct_data_v2_v3, .irqpending_quirk = 0, @@ -1346,9 +1348,7 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = { .check_int = check_int_v3, .irq_control = irq_control_v3, .get_ecc_status = get_ecc_status_v3, - .ecclayout_512 = &nandv2_hw_eccoob_smallpage, - .ecclayout_2k = &nandv2_hw_eccoob_largepage, - .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */ + .ooblayout = &mxc_v2_ooblayout_ops, .select_chip = mxc_nand_select_chip_v1_v3, .correct_data = mxc_nand_correct_data_v2_v3, .irqpending_quirk = 0, @@ -1373,9 +1373,7 @@ static const struct mxc_nand_devtype_data imx53_nand_devtype_data = { .check_int = check_int_v3, .irq_control = irq_control_v3, .get_ecc_status = get_ecc_status_v3, - .ecclayout_512 = &nandv2_hw_eccoob_smallpage, - .ecclayout_2k = &nandv2_hw_eccoob_largepage, - .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */ + .ooblayout = &mxc_v2_ooblayout_ops, .select_chip = mxc_nand_select_chip_v1_v3, .correct_data = mxc_nand_correct_data_v2_v3, .irqpending_quirk = 0, @@ -1461,25 +1459,12 @@ MODULE_DEVICE_TABLE(of, mxcnd_dt_ids); static int __init mxcnd_probe_dt(struct mxc_nand_host *host) { struct device_node *np = host->dev->of_node; - struct mxc_nand_platform_data *pdata = &host->pdata; const struct of_device_id *of_id = of_match_device(mxcnd_dt_ids, host->dev); - int buswidth; if (!np) return 1; - if (of_get_nand_ecc_mode(np) >= 0) - pdata->hw_ecc = 1; - - pdata->flash_bbt = of_get_nand_on_flash_bbt(np); - - buswidth = of_get_nand_bus_width(np); - if (buswidth < 0) - return buswidth; - - pdata->width = buswidth / 8; - host->devtype_data = of_id->data; return 0; @@ -1576,27 +1561,22 @@ static int mxcnd_probe(struct platform_device *pdev) this->select_chip = host->devtype_data->select_chip; this->ecc.size = 512; - this->ecc.layout = host->devtype_data->ecclayout_512; + mtd_set_ooblayout(mtd, host->devtype_data->ooblayout); if (host->pdata.hw_ecc) { - this->ecc.calculate = mxc_nand_calculate_ecc; - this->ecc.hwctl = mxc_nand_enable_hwecc; - this->ecc.correct = host->devtype_data->correct_data; this->ecc.mode = NAND_ECC_HW; } else { this->ecc.mode = NAND_ECC_SOFT; + this->ecc.algo = NAND_ECC_HAMMING; } /* NAND bus width determines access functions used by upper layer */ if (host->pdata.width == 2) this->options |= NAND_BUSWIDTH_16; - if (host->pdata.flash_bbt) { - this->bbt_td = &bbt_main_descr; - this->bbt_md = &bbt_mirror_descr; - /* update flash based bbt */ + /* update flash based bbt */ + if (host->pdata.flash_bbt) this->bbt_options |= NAND_BBT_USE_FLASH; - } init_completion(&host->op_completion); @@ -1637,6 +1617,26 @@ static int mxcnd_probe(struct platform_device *pdev) goto escan; } + switch (this->ecc.mode) { + case NAND_ECC_HW: + this->ecc.calculate = mxc_nand_calculate_ecc; + this->ecc.hwctl = mxc_nand_enable_hwecc; + this->ecc.correct = host->devtype_data->correct_data; + break; + + case NAND_ECC_SOFT: + break; + + default: + err = -EINVAL; + goto escan; + } + + if (this->bbt_options & NAND_BBT_USE_FLASH) { + this->bbt_td = &bbt_main_descr; + this->bbt_md = &bbt_mirror_descr; + } + /* allocate the right size buffer now */ devm_kfree(&pdev->dev, (void *)host->data_buf); host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize, @@ -1649,12 +1649,11 @@ static int mxcnd_probe(struct platform_device *pdev) /* Call preset again, with correct writesize this time */ host->devtype_data->preset(mtd); - if (mtd->writesize == 2048) - this->ecc.layout = host->devtype_data->ecclayout_2k; - else if (mtd->writesize == 4096) { - this->ecc.layout = host->devtype_data->ecclayout_4k; - if (get_eccsize(mtd) == 8) - ecc_8bit_layout_4k(this->ecc.layout); + if (!this->ecc.bytes) { + if (host->eccsize == 8) + this->ecc.bytes = 18; + else if (host->eccsize == 4) + this->ecc.bytes = 9; } /* diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 557b8462f55e..0b0dc29d2af7 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -43,65 +43,100 @@ #include <linux/mtd/nand_bch.h> #include <linux/interrupt.h> #include <linux/bitops.h> -#include <linux/leds.h> #include <linux/io.h> #include <linux/mtd/partitions.h> -#include <linux/of_mtd.h> +#include <linux/of.h> + +static int nand_get_device(struct mtd_info *mtd, int new_state); + +static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops); /* Define default oob placement schemes for large and small page devices */ -static struct nand_ecclayout nand_oob_8 = { - .eccbytes = 3, - .eccpos = {0, 1, 2}, - .oobfree = { - {.offset = 3, - .length = 2}, - {.offset = 6, - .length = 2} } -}; +static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; -static struct nand_ecclayout nand_oob_16 = { - .eccbytes = 6, - .eccpos = {0, 1, 2, 3, 6, 7}, - .oobfree = { - {.offset = 8, - . length = 8} } -}; + if (section > 1) + return -ERANGE; -static struct nand_ecclayout nand_oob_64 = { - .eccbytes = 24, - .eccpos = { - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63}, - .oobfree = { - {.offset = 2, - .length = 38} } -}; + if (!section) { + oobregion->offset = 0; + oobregion->length = 4; + } else { + oobregion->offset = 6; + oobregion->length = ecc->total - 4; + } + + return 0; +} + +static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 1) + return -ERANGE; -static struct nand_ecclayout nand_oob_128 = { - .eccbytes = 48, - .eccpos = { - 80, 81, 82, 83, 84, 85, 86, 87, - 88, 89, 90, 91, 92, 93, 94, 95, - 96, 97, 98, 99, 100, 101, 102, 103, - 104, 105, 106, 107, 108, 109, 110, 111, - 112, 113, 114, 115, 116, 117, 118, 119, - 120, 121, 122, 123, 124, 125, 126, 127}, - .oobfree = { - {.offset = 2, - .length = 78} } + if (mtd->oobsize == 16) { + if (section) + return -ERANGE; + + oobregion->length = 8; + oobregion->offset = 8; + } else { + oobregion->length = 2; + if (!section) + oobregion->offset = 3; + else + oobregion->offset = 6; + } + + return 0; +} + +const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = { + .ecc = nand_ooblayout_ecc_sp, + .free = nand_ooblayout_free_sp, }; +EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops); -static int nand_get_device(struct mtd_info *mtd, int new_state); +static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; -static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, - struct mtd_oob_ops *ops); + if (section) + return -ERANGE; -/* - * For devices which display every fart in the system on a separate LED. Is - * compiled away when LED support is disabled. - */ -DEFINE_LED_TRIGGER(nand_led_trigger); + oobregion->length = ecc->total; + oobregion->offset = mtd->oobsize - oobregion->length; + + return 0; +} + +static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (section) + return -ERANGE; + + oobregion->length = mtd->oobsize - ecc->total - 2; + oobregion->offset = 2; + + return 0; +} + +const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = { + .ecc = nand_ooblayout_ecc_lp, + .free = nand_ooblayout_free_lp, +}; +EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops); static int check_offs_len(struct mtd_info *mtd, loff_t ofs, uint64_t len) @@ -540,19 +575,16 @@ void nand_wait_ready(struct mtd_info *mtd) if (in_interrupt() || oops_in_progress) return panic_nand_wait_ready(mtd, timeo); - led_trigger_event(nand_led_trigger, LED_FULL); /* Wait until command is processed or timeout occurs */ timeo = jiffies + msecs_to_jiffies(timeo); do { if (chip->dev_ready(mtd)) - goto out; + return; cond_resched(); } while (time_before(jiffies, timeo)); if (!chip->dev_ready(mtd)) pr_warn_ratelimited("timeout while waiting for chip to become ready\n"); -out: - led_trigger_event(nand_led_trigger, LED_OFF); } EXPORT_SYMBOL_GPL(nand_wait_ready); @@ -885,8 +917,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) int status; unsigned long timeo = 400; - led_trigger_event(nand_led_trigger, LED_FULL); - /* * Apply this short delay always to ensure that we do wait tWB in any * case on any machine. @@ -910,7 +940,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) cond_resched(); } while (time_before(jiffies, timeo)); } - led_trigger_event(nand_led_trigger, LED_OFF); status = (int)chip->read_byte(mtd); /* This can happen if in case of timeout or buggy dev_ready */ @@ -1292,13 +1321,12 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { - int i, eccsize = chip->ecc.size; + int i, eccsize = chip->ecc.size, ret; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *p = buf; uint8_t *ecc_calc = chip->buffers->ecccalc; uint8_t *ecc_code = chip->buffers->ecccode; - uint32_t *eccpos = chip->ecc.layout->eccpos; unsigned int max_bitflips = 0; chip->ecc.read_page_raw(mtd, chip, buf, 1, page); @@ -1306,8 +1334,10 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) chip->ecc.calculate(mtd, p, &ecc_calc[i]); - for (i = 0; i < chip->ecc.total; i++) - ecc_code[i] = chip->oob_poi[eccpos[i]]; + ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; eccsteps = chip->ecc.steps; p = buf; @@ -1339,14 +1369,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, int page) { - int start_step, end_step, num_steps; - uint32_t *eccpos = chip->ecc.layout->eccpos; + int start_step, end_step, num_steps, ret; uint8_t *p; int data_col_addr, i, gaps = 0; int datafrag_len, eccfrag_len, aligned_len, aligned_pos; int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; - int index; + int index, section = 0; unsigned int max_bitflips = 0; + struct mtd_oob_region oobregion = { }; /* Column address within the page aligned to ECC size (256bytes) */ start_step = data_offs / chip->ecc.size; @@ -1374,12 +1404,13 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, * The performance is faster if we position offsets according to * ecc.pos. Let's make sure that there are no gaps in ECC positions. */ - for (i = 0; i < eccfrag_len - 1; i++) { - if (eccpos[i + index] + 1 != eccpos[i + index + 1]) { - gaps = 1; - break; - } - } + ret = mtd_ooblayout_find_eccregion(mtd, index, §ion, &oobregion); + if (ret) + return ret; + + if (oobregion.length < eccfrag_len) + gaps = 1; + if (gaps) { chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -1388,20 +1419,23 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, * Send the command to read the particular ECC bytes take care * about buswidth alignment in read_buf. */ - aligned_pos = eccpos[index] & ~(busw - 1); + aligned_pos = oobregion.offset & ~(busw - 1); aligned_len = eccfrag_len; - if (eccpos[index] & (busw - 1)) + if (oobregion.offset & (busw - 1)) aligned_len++; - if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1)) + if ((oobregion.offset + (num_steps * chip->ecc.bytes)) & + (busw - 1)) aligned_len++; chip->cmdfunc(mtd, NAND_CMD_RNDOUT, - mtd->writesize + aligned_pos, -1); + mtd->writesize + aligned_pos, -1); chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); } - for (i = 0; i < eccfrag_len; i++) - chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]]; + ret = mtd_ooblayout_get_eccbytes(mtd, chip->buffers->ecccode, + chip->oob_poi, index, eccfrag_len); + if (ret) + return ret; p = bufpoi + data_col_addr; for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { @@ -1442,13 +1476,12 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { - int i, eccsize = chip->ecc.size; + int i, eccsize = chip->ecc.size, ret; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *p = buf; uint8_t *ecc_calc = chip->buffers->ecccalc; uint8_t *ecc_code = chip->buffers->ecccode; - uint32_t *eccpos = chip->ecc.layout->eccpos; unsigned int max_bitflips = 0; for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { @@ -1458,8 +1491,10 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, } chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - for (i = 0; i < chip->ecc.total; i++) - ecc_code[i] = chip->oob_poi[eccpos[i]]; + ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; eccsteps = chip->ecc.steps; p = buf; @@ -1504,12 +1539,11 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { - int i, eccsize = chip->ecc.size; + int i, eccsize = chip->ecc.size, ret; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *p = buf; uint8_t *ecc_code = chip->buffers->ecccode; - uint32_t *eccpos = chip->ecc.layout->eccpos; uint8_t *ecc_calc = chip->buffers->ecccalc; unsigned int max_bitflips = 0; @@ -1518,8 +1552,10 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - for (i = 0; i < chip->ecc.total; i++) - ecc_code[i] = chip->oob_poi[eccpos[i]]; + ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { int stat; @@ -1620,14 +1656,17 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, /** * nand_transfer_oob - [INTERN] Transfer oob to client buffer - * @chip: nand chip structure + * @mtd: mtd info structure * @oob: oob destination address * @ops: oob ops structure * @len: size of oob to transfer */ -static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, +static uint8_t *nand_transfer_oob(struct mtd_info *mtd, uint8_t *oob, struct mtd_oob_ops *ops, size_t len) { + struct nand_chip *chip = mtd_to_nand(mtd); + int ret; + switch (ops->mode) { case MTD_OPS_PLACE_OOB: @@ -1635,31 +1674,12 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, memcpy(oob, chip->oob_poi + ops->ooboffs, len); return oob + len; - case MTD_OPS_AUTO_OOB: { - struct nand_oobfree *free = chip->ecc.layout->oobfree; - uint32_t boffs = 0, roffs = ops->ooboffs; - size_t bytes = 0; - - for (; free->length && len; free++, len -= bytes) { - /* Read request not from offset 0? */ - if (unlikely(roffs)) { - if (roffs >= free->length) { - roffs -= free->length; - continue; - } - boffs = free->offset + roffs; - bytes = min_t(size_t, len, - (free->length - roffs)); - roffs = 0; - } else { - bytes = min_t(size_t, len, free->length); - boffs = free->offset; - } - memcpy(oob, chip->oob_poi + boffs, bytes); - oob += bytes; - } - return oob; - } + case MTD_OPS_AUTO_OOB: + ret = mtd_ooblayout_get_databytes(mtd, oob, chip->oob_poi, + ops->ooboffs, len); + BUG_ON(ret); + return oob + len; + default: BUG(); } @@ -1793,7 +1813,7 @@ read_retry: int toread = min(oobreadlen, max_oobsize); if (toread) { - oob = nand_transfer_oob(chip, + oob = nand_transfer_oob(mtd, oob, ops, toread); oobreadlen -= toread; } @@ -1906,13 +1926,13 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, * @chip: nand chip info structure * @page: page number to read */ -static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, - int page) +int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page) { chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); return 0; } +EXPORT_SYMBOL(nand_read_oob_std); /** * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC @@ -1921,8 +1941,8 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, * @chip: nand chip info structure * @page: page number to read */ -static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, - int page) +int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + int page) { int length = mtd->oobsize; int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; @@ -1950,6 +1970,7 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, return 0; } +EXPORT_SYMBOL(nand_read_oob_syndrome); /** * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function @@ -1957,8 +1978,7 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, * @chip: nand chip info structure * @page: page number to write */ -static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, - int page) +int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page) { int status = 0; const uint8_t *buf = chip->oob_poi; @@ -1973,6 +1993,7 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, return status & NAND_STATUS_FAIL ? -EIO : 0; } +EXPORT_SYMBOL(nand_write_oob_std); /** * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC @@ -1981,8 +2002,8 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, * @chip: nand chip info structure * @page: page number to write */ -static int nand_write_oob_syndrome(struct mtd_info *mtd, - struct nand_chip *chip, int page) +int nand_write_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + int page) { int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; int eccsize = chip->ecc.size, length = mtd->oobsize; @@ -2032,6 +2053,7 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd, return status & NAND_STATUS_FAIL ? -EIO : 0; } +EXPORT_SYMBOL(nand_write_oob_syndrome); /** * nand_do_read_oob - [INTERN] NAND read out-of-band @@ -2091,7 +2113,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, break; len = min(len, readlen); - buf = nand_transfer_oob(chip, buf, ops, len); + buf = nand_transfer_oob(mtd, buf, ops, len); if (chip->options & NAND_NEED_READRDY) { /* Apply delay or wait for ready/busy pin */ @@ -2250,19 +2272,20 @@ static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required, int page) { - int i, eccsize = chip->ecc.size; + int i, eccsize = chip->ecc.size, ret; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *ecc_calc = chip->buffers->ecccalc; const uint8_t *p = buf; - uint32_t *eccpos = chip->ecc.layout->eccpos; /* Software ECC calculation */ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) chip->ecc.calculate(mtd, p, &ecc_calc[i]); - for (i = 0; i < chip->ecc.total; i++) - chip->oob_poi[eccpos[i]] = ecc_calc[i]; + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; return chip->ecc.write_page_raw(mtd, chip, buf, 1, page); } @@ -2279,12 +2302,11 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required, int page) { - int i, eccsize = chip->ecc.size; + int i, eccsize = chip->ecc.size, ret; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *ecc_calc = chip->buffers->ecccalc; const uint8_t *p = buf; - uint32_t *eccpos = chip->ecc.layout->eccpos; for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { chip->ecc.hwctl(mtd, NAND_ECC_WRITE); @@ -2292,8 +2314,10 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, chip->ecc.calculate(mtd, p, &ecc_calc[i]); } - for (i = 0; i < chip->ecc.total; i++) - chip->oob_poi[eccpos[i]] = ecc_calc[i]; + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -2321,11 +2345,10 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd, int ecc_size = chip->ecc.size; int ecc_bytes = chip->ecc.bytes; int ecc_steps = chip->ecc.steps; - uint32_t *eccpos = chip->ecc.layout->eccpos; uint32_t start_step = offset / ecc_size; uint32_t end_step = (offset + data_len - 1) / ecc_size; int oob_bytes = mtd->oobsize / ecc_steps; - int step, i; + int step, ret; for (step = 0; step < ecc_steps; step++) { /* configure controller for WRITE access */ @@ -2353,8 +2376,10 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd, /* copy calculated ECC for whole page to chip->buffer->oob */ /* this include masked-value(0xFF) for unwritten subpages */ ecc_calc = chip->buffers->ecccalc; - for (i = 0; i < chip->ecc.total; i++) - chip->oob_poi[eccpos[i]] = ecc_calc[i]; + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; /* write OOB buffer to NAND device */ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -2491,6 +2516,7 @@ static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len, struct mtd_oob_ops *ops) { struct nand_chip *chip = mtd_to_nand(mtd); + int ret; /* * Initialise to all 0xFF, to avoid the possibility of left over OOB @@ -2505,31 +2531,12 @@ static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len, memcpy(chip->oob_poi + ops->ooboffs, oob, len); return oob + len; - case MTD_OPS_AUTO_OOB: { - struct nand_oobfree *free = chip->ecc.layout->oobfree; - uint32_t boffs = 0, woffs = ops->ooboffs; - size_t bytes = 0; - - for (; free->length && len; free++, len -= bytes) { - /* Write request not from offset 0? */ - if (unlikely(woffs)) { - if (woffs >= free->length) { - woffs -= free->length; - continue; - } - boffs = free->offset + woffs; - bytes = min_t(size_t, len, - (free->length - woffs)); - woffs = 0; - } else { - bytes = min_t(size_t, len, free->length); - boffs = free->offset; - } - memcpy(chip->oob_poi + boffs, oob, bytes); - oob += bytes; - } - return oob; - } + case MTD_OPS_AUTO_OOB: + ret = mtd_ooblayout_set_databytes(mtd, oob, chip->oob_poi, + ops->ooboffs, len); + BUG_ON(ret); + return oob + len; + default: BUG(); } @@ -3964,10 +3971,115 @@ ident_done: return type; } +static const char * const nand_ecc_modes[] = { + [NAND_ECC_NONE] = "none", + [NAND_ECC_SOFT] = "soft", + [NAND_ECC_HW] = "hw", + [NAND_ECC_HW_SYNDROME] = "hw_syndrome", + [NAND_ECC_HW_OOB_FIRST] = "hw_oob_first", +}; + +static int of_get_nand_ecc_mode(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "nand-ecc-mode", &pm); + if (err < 0) + return err; + + for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++) + if (!strcasecmp(pm, nand_ecc_modes[i])) + return i; + + /* + * For backward compatibility we support few obsoleted values that don't + * have their mappings into nand_ecc_modes_t anymore (they were merged + * with other enums). + */ + if (!strcasecmp(pm, "soft_bch")) + return NAND_ECC_SOFT; + + return -ENODEV; +} + +static const char * const nand_ecc_algos[] = { + [NAND_ECC_HAMMING] = "hamming", + [NAND_ECC_BCH] = "bch", +}; + +static int of_get_nand_ecc_algo(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "nand-ecc-algo", &pm); + if (!err) { + for (i = NAND_ECC_HAMMING; i < ARRAY_SIZE(nand_ecc_algos); i++) + if (!strcasecmp(pm, nand_ecc_algos[i])) + return i; + return -ENODEV; + } + + /* + * For backward compatibility we also read "nand-ecc-mode" checking + * for some obsoleted values that were specifying ECC algorithm. + */ + err = of_property_read_string(np, "nand-ecc-mode", &pm); + if (err < 0) + return err; + + if (!strcasecmp(pm, "soft")) + return NAND_ECC_HAMMING; + else if (!strcasecmp(pm, "soft_bch")) + return NAND_ECC_BCH; + + return -ENODEV; +} + +static int of_get_nand_ecc_step_size(struct device_node *np) +{ + int ret; + u32 val; + + ret = of_property_read_u32(np, "nand-ecc-step-size", &val); + return ret ? ret : val; +} + +static int of_get_nand_ecc_strength(struct device_node *np) +{ + int ret; + u32 val; + + ret = of_property_read_u32(np, "nand-ecc-strength", &val); + return ret ? ret : val; +} + +static int of_get_nand_bus_width(struct device_node *np) +{ + u32 val; + + if (of_property_read_u32(np, "nand-bus-width", &val)) + return 8; + + switch (val) { + case 8: + case 16: + return val; + default: + return -EIO; + } +} + +static bool of_get_nand_on_flash_bbt(struct device_node *np) +{ + return of_property_read_bool(np, "nand-on-flash-bbt"); +} + static int nand_dt_init(struct nand_chip *chip) { struct device_node *dn = nand_get_flash_node(chip); - int ecc_mode, ecc_strength, ecc_step; + int ecc_mode, ecc_algo, ecc_strength, ecc_step; if (!dn) return 0; @@ -3979,6 +4091,7 @@ static int nand_dt_init(struct nand_chip *chip) chip->bbt_options |= NAND_BBT_USE_FLASH; ecc_mode = of_get_nand_ecc_mode(dn); + ecc_algo = of_get_nand_ecc_algo(dn); ecc_strength = of_get_nand_ecc_strength(dn); ecc_step = of_get_nand_ecc_step_size(dn); @@ -3991,6 +4104,9 @@ static int nand_dt_init(struct nand_chip *chip) if (ecc_mode >= 0) chip->ecc.mode = ecc_mode; + if (ecc_algo >= 0) + chip->ecc.algo = ecc_algo; + if (ecc_strength >= 0) chip->ecc.strength = ecc_strength; @@ -4067,6 +4183,82 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, } EXPORT_SYMBOL(nand_scan_ident); +static int nand_set_ecc_soft_ops(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (WARN_ON(ecc->mode != NAND_ECC_SOFT)) + return -EINVAL; + + switch (ecc->algo) { + case NAND_ECC_HAMMING: + ecc->calculate = nand_calculate_ecc; + ecc->correct = nand_correct_data; + ecc->read_page = nand_read_page_swecc; + ecc->read_subpage = nand_read_subpage; + ecc->write_page = nand_write_page_swecc; + ecc->read_page_raw = nand_read_page_raw; + ecc->write_page_raw = nand_write_page_raw; + ecc->read_oob = nand_read_oob_std; + ecc->write_oob = nand_write_oob_std; + if (!ecc->size) + ecc->size = 256; + ecc->bytes = 3; + ecc->strength = 1; + return 0; + case NAND_ECC_BCH: + if (!mtd_nand_has_bch()) { + WARN(1, "CONFIG_MTD_NAND_ECC_BCH not enabled\n"); + return -EINVAL; + } + ecc->calculate = nand_bch_calculate_ecc; + ecc->correct = nand_bch_correct_data; + ecc->read_page = nand_read_page_swecc; + ecc->read_subpage = nand_read_subpage; + ecc->write_page = nand_write_page_swecc; + ecc->read_page_raw = nand_read_page_raw; + ecc->write_page_raw = nand_write_page_raw; + ecc->read_oob = nand_read_oob_std; + ecc->write_oob = nand_write_oob_std; + /* + * Board driver should supply ecc.size and ecc.strength + * values to select how many bits are correctable. + * Otherwise, default to 4 bits for large page devices. + */ + if (!ecc->size && (mtd->oobsize >= 64)) { + ecc->size = 512; + ecc->strength = 4; + } + + /* + * if no ecc placement scheme was provided pickup the default + * large page one. + */ + if (!mtd->ooblayout) { + /* handle large page devices only */ + if (mtd->oobsize < 64) { + WARN(1, "OOB layout is required when using software BCH on small pages\n"); + return -EINVAL; + } + + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); + } + + /* See nand_bch_init() for details. */ + ecc->bytes = 0; + ecc->priv = nand_bch_init(mtd); + if (!ecc->priv) { + WARN(1, "BCH ECC initialization failed!\n"); + return -EINVAL; + } + return 0; + default: + WARN(1, "Unsupported ECC algorithm!\n"); + return -EINVAL; + } +} + /* * Check if the chip configuration meet the datasheet requirements. @@ -4111,14 +4303,15 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd) */ int nand_scan_tail(struct mtd_info *mtd) { - int i; struct nand_chip *chip = mtd_to_nand(mtd); struct nand_ecc_ctrl *ecc = &chip->ecc; struct nand_buffers *nbuf; + int ret; /* New bad blocks should be marked in OOB, flash-based BBT, or both */ - BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && - !(chip->bbt_options & NAND_BBT_USE_FLASH)); + if (WARN_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && + !(chip->bbt_options & NAND_BBT_USE_FLASH))) + return -EINVAL; if (!(chip->options & NAND_OWN_BUFFERS)) { nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize @@ -4141,24 +4334,22 @@ int nand_scan_tail(struct mtd_info *mtd) /* * If no default placement scheme is given, select an appropriate one. */ - if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) { + if (!mtd->ooblayout && + !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_BCH)) { switch (mtd->oobsize) { case 8: - ecc->layout = &nand_oob_8; - break; case 16: - ecc->layout = &nand_oob_16; + mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops); break; case 64: - ecc->layout = &nand_oob_64; - break; case 128: - ecc->layout = &nand_oob_128; + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); break; default: - pr_warn("No oob scheme defined for oobsize %d\n", - mtd->oobsize); - BUG(); + WARN(1, "No oob scheme defined for oobsize %d\n", + mtd->oobsize); + ret = -EINVAL; + goto err_free; } } @@ -4174,8 +4365,9 @@ int nand_scan_tail(struct mtd_info *mtd) case NAND_ECC_HW_OOB_FIRST: /* Similar to NAND_ECC_HW, but a separate read_page handle */ if (!ecc->calculate || !ecc->correct || !ecc->hwctl) { - pr_warn("No ECC functions supplied; hardware ECC not possible\n"); - BUG(); + WARN(1, "No ECC functions supplied; hardware ECC not possible\n"); + ret = -EINVAL; + goto err_free; } if (!ecc->read_page) ecc->read_page = nand_read_page_hwecc_oob_first; @@ -4205,8 +4397,9 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->read_page == nand_read_page_hwecc || !ecc->write_page || ecc->write_page == nand_write_page_hwecc)) { - pr_warn("No ECC functions supplied; hardware ECC not possible\n"); - BUG(); + WARN(1, "No ECC functions supplied; hardware ECC not possible\n"); + ret = -EINVAL; + goto err_free; } /* Use standard syndrome read/write page function? */ if (!ecc->read_page) @@ -4224,61 +4417,22 @@ int nand_scan_tail(struct mtd_info *mtd) if (mtd->writesize >= ecc->size) { if (!ecc->strength) { - pr_warn("Driver must set ecc.strength when using hardware ECC\n"); - BUG(); + WARN(1, "Driver must set ecc.strength when using hardware ECC\n"); + ret = -EINVAL; + goto err_free; } break; } pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n", ecc->size, mtd->writesize); ecc->mode = NAND_ECC_SOFT; + ecc->algo = NAND_ECC_HAMMING; case NAND_ECC_SOFT: - ecc->calculate = nand_calculate_ecc; - ecc->correct = nand_correct_data; - ecc->read_page = nand_read_page_swecc; - ecc->read_subpage = nand_read_subpage; - ecc->write_page = nand_write_page_swecc; - ecc->read_page_raw = nand_read_page_raw; - ecc->write_page_raw = nand_write_page_raw; - ecc->read_oob = nand_read_oob_std; - ecc->write_oob = nand_write_oob_std; - if (!ecc->size) - ecc->size = 256; - ecc->bytes = 3; - ecc->strength = 1; - break; - - case NAND_ECC_SOFT_BCH: - if (!mtd_nand_has_bch()) { - pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n"); - BUG(); - } - ecc->calculate = nand_bch_calculate_ecc; - ecc->correct = nand_bch_correct_data; - ecc->read_page = nand_read_page_swecc; - ecc->read_subpage = nand_read_subpage; - ecc->write_page = nand_write_page_swecc; - ecc->read_page_raw = nand_read_page_raw; - ecc->write_page_raw = nand_write_page_raw; - ecc->read_oob = nand_read_oob_std; - ecc->write_oob = nand_write_oob_std; - /* - * Board driver should supply ecc.size and ecc.strength values - * to select how many bits are correctable. Otherwise, default - * to 4 bits for large page devices. - */ - if (!ecc->size && (mtd->oobsize >= 64)) { - ecc->size = 512; - ecc->strength = 4; - } - - /* See nand_bch_init() for details. */ - ecc->bytes = 0; - ecc->priv = nand_bch_init(mtd); - if (!ecc->priv) { - pr_warn("BCH ECC initialization failed!\n"); - BUG(); + ret = nand_set_ecc_soft_ops(mtd); + if (ret) { + ret = -EINVAL; + goto err_free; } break; @@ -4296,8 +4450,9 @@ int nand_scan_tail(struct mtd_info *mtd) break; default: - pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode); - BUG(); + WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode); + ret = -EINVAL; + goto err_free; } /* For many systems, the standard OOB write also works for raw */ @@ -4306,20 +4461,9 @@ int nand_scan_tail(struct mtd_info *mtd) if (!ecc->write_oob_raw) ecc->write_oob_raw = ecc->write_oob; - /* - * The number of bytes available for a client to place data into - * the out of band area. - */ - mtd->oobavail = 0; - if (ecc->layout) { - for (i = 0; ecc->layout->oobfree[i].length; i++) - mtd->oobavail += ecc->layout->oobfree[i].length; - } - - /* ECC sanity check: warn if it's too weak */ - if (!nand_ecc_strength_good(mtd)) - pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", - mtd->name); + /* propagate ecc info to mtd_info */ + mtd->ecc_strength = ecc->strength; + mtd->ecc_step_size = ecc->size; /* * Set the number of read / write steps for one page depending on ECC @@ -4327,11 +4471,27 @@ int nand_scan_tail(struct mtd_info *mtd) */ ecc->steps = mtd->writesize / ecc->size; if (ecc->steps * ecc->size != mtd->writesize) { - pr_warn("Invalid ECC parameters\n"); - BUG(); + WARN(1, "Invalid ECC parameters\n"); + ret = -EINVAL; + goto err_free; } ecc->total = ecc->steps * ecc->bytes; + /* + * The number of bytes available for a client to place data into + * the out of band area. + */ + ret = mtd_ooblayout_count_freebytes(mtd); + if (ret < 0) + ret = 0; + + mtd->oobavail = ret; + + /* ECC sanity check: warn if it's too weak */ + if (!nand_ecc_strength_good(mtd)) + pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", + mtd->name); + /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { switch (ecc->steps) { @@ -4356,7 +4516,6 @@ int nand_scan_tail(struct mtd_info *mtd) /* Large page NAND with SOFT_ECC should support subpage reads */ switch (ecc->mode) { case NAND_ECC_SOFT: - case NAND_ECC_SOFT_BCH: if (chip->page_shift > 9) chip->options |= NAND_SUBPAGE_READ; break; @@ -4388,10 +4547,6 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->_block_markbad = nand_block_markbad; mtd->writebufsize = mtd->writesize; - /* propagate ecc info to mtd_info */ - mtd->ecclayout = ecc->layout; - mtd->ecc_strength = ecc->strength; - mtd->ecc_step_size = ecc->size; /* * Initialize bitflip_threshold to its default prior scan_bbt() call. * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be @@ -4406,6 +4561,10 @@ int nand_scan_tail(struct mtd_info *mtd) /* Build bad block table */ return chip->scan_bbt(mtd); +err_free: + if (!(chip->options & NAND_OWN_BUFFERS)) + kfree(chip->buffers); + return ret; } EXPORT_SYMBOL(nand_scan_tail); @@ -4449,7 +4608,8 @@ void nand_release(struct mtd_info *mtd) { struct nand_chip *chip = mtd_to_nand(mtd); - if (chip->ecc.mode == NAND_ECC_SOFT_BCH) + if (chip->ecc.mode == NAND_ECC_SOFT && + chip->ecc.algo == NAND_ECC_BCH) nand_bch_free((struct nand_bch_control *)chip->ecc.priv); mtd_device_unregister(mtd); @@ -4466,20 +4626,6 @@ void nand_release(struct mtd_info *mtd) } EXPORT_SYMBOL_GPL(nand_release); -static int __init nand_base_init(void) -{ - led_trigger_register_simple("nand-disk", &nand_led_trigger); - return 0; -} - -static void __exit nand_base_exit(void) -{ - led_trigger_unregister_simple(nand_led_trigger); -} - -module_init(nand_base_init); -module_exit(nand_base_exit); - MODULE_LICENSE("GPL"); MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>"); MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>"); diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c index b585bae37929..28ef7b178eac 100644 --- a/drivers/mtd/nand/nand_bch.c +++ b/drivers/mtd/nand/nand_bch.c @@ -32,13 +32,11 @@ /** * struct nand_bch_control - private NAND BCH control structure * @bch: BCH control structure - * @ecclayout: private ecc layout for this BCH configuration * @errloc: error location array * @eccmask: XOR ecc mask, allows erased pages to be decoded as valid */ struct nand_bch_control { struct bch_control *bch; - struct nand_ecclayout ecclayout; unsigned int *errloc; unsigned char *eccmask; }; @@ -124,7 +122,6 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd) { struct nand_chip *nand = mtd_to_nand(mtd); unsigned int m, t, eccsteps, i; - struct nand_ecclayout *layout = nand->ecc.layout; struct nand_bch_control *nbc = NULL; unsigned char *erased_page; unsigned int eccsize = nand->ecc.size; @@ -161,34 +158,10 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd) eccsteps = mtd->writesize/eccsize; - /* if no ecc placement scheme was provided, build one */ - if (!layout) { - - /* handle large page devices only */ - if (mtd->oobsize < 64) { - printk(KERN_WARNING "must provide an oob scheme for " - "oobsize %d\n", mtd->oobsize); - goto fail; - } - - layout = &nbc->ecclayout; - layout->eccbytes = eccsteps*eccbytes; - - /* reserve 2 bytes for bad block marker */ - if (layout->eccbytes+2 > mtd->oobsize) { - printk(KERN_WARNING "no suitable oob scheme available " - "for oobsize %d eccbytes %u\n", mtd->oobsize, - eccbytes); - goto fail; - } - /* put ecc bytes at oob tail */ - for (i = 0; i < layout->eccbytes; i++) - layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i; - - layout->oobfree[0].offset = 2; - layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes; - - nand->ecc.layout = layout; + /* Check that we have an oob layout description. */ + if (!mtd->ooblayout) { + pr_warn("missing oob scheme"); + goto fail; } /* sanity checks */ @@ -196,7 +169,18 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd) printk(KERN_WARNING "eccsize %u is too large\n", eccsize); goto fail; } - if (layout->eccbytes != (eccsteps*eccbytes)) { + + /* + * ecc->steps and ecc->total might be used by mtd->ooblayout->ecc(), + * which is called by mtd_ooblayout_count_eccbytes(). + * Make sure they are properly initialized before calling + * mtd_ooblayout_count_eccbytes(). + * FIXME: we should probaly rework the sequencing in nand_scan_tail() + * to avoid setting those fields twice. + */ + nand->ecc.steps = eccsteps; + nand->ecc.total = eccsteps * eccbytes; + if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) { printk(KERN_WARNING "invalid ecc layout\n"); goto fail; } diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 1fd519503bb1..794745dff7f1 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -569,7 +569,7 @@ static void nandsim_debugfs_remove(struct nandsim *ns) * * RETURNS: 0 if success, -ENOMEM if memory alloc fails. */ -static int alloc_device(struct nandsim *ns) +static int __init alloc_device(struct nandsim *ns) { struct file *cfile; int i, err; @@ -654,7 +654,7 @@ static void free_device(struct nandsim *ns) } } -static char *get_partition_name(int i) +static char __init *get_partition_name(int i) { return kasprintf(GFP_KERNEL, "NAND simulator partition %d", i); } @@ -664,7 +664,7 @@ static char *get_partition_name(int i) * * RETURNS: 0 if success, -ERRNO if failure. */ -static int init_nandsim(struct mtd_info *mtd) +static int __init init_nandsim(struct mtd_info *mtd) { struct nand_chip *chip = mtd_to_nand(mtd); struct nandsim *ns = nand_get_controller_data(chip); @@ -2261,6 +2261,7 @@ static int __init ns_init_module(void) chip->read_buf = ns_nand_read_buf; chip->read_word = ns_nand_read_word; chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_HAMMING; /* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */ /* and 'badblocks' parameters to work */ chip->options |= NAND_SKIP_BBTSCAN; @@ -2338,7 +2339,8 @@ static int __init ns_init_module(void) retval = -EINVAL; goto error; } - chip->ecc.mode = NAND_ECC_SOFT_BCH; + chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_BCH; chip->ecc.size = 512; chip->ecc.strength = bch; chip->ecc.bytes = eccbytes; diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c index dbc5b571c2bb..8f64011d32ef 100644 --- a/drivers/mtd/nand/nuc900_nand.c +++ b/drivers/mtd/nand/nuc900_nand.c @@ -261,6 +261,7 @@ static int nuc900_nand_probe(struct platform_device *pdev) chip->chip_delay = 50; chip->options = 0; chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_HAMMING; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); nuc900_nand->reg = devm_ioremap_resource(&pdev->dev, res); diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 0749ca1a1456..08e158895635 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -12,6 +12,7 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/jiffies.h> @@ -28,6 +29,7 @@ #include <linux/mtd/nand_bch.h> #include <linux/platform_data/elm.h> +#include <linux/omap-gpmc.h> #include <linux/platform_data/mtd-nand-omap2.h> #define DRIVER_NAME "omap2-nand" @@ -151,13 +153,17 @@ static struct nand_hw_control omap_gpmc_controller = { }; struct omap_nand_info { - struct omap_nand_platform_data *pdata; struct nand_chip nand; struct platform_device *pdev; int gpmc_cs; - unsigned long phys_base; + bool dev_ready; + enum nand_io xfer_type; + int devsize; enum omap_ecc ecc_opt; + struct device_node *elm_of_node; + + unsigned long phys_base; struct completion comp; struct dma_chan *dma; int gpmc_irq_fifo; @@ -168,12 +174,14 @@ struct omap_nand_info { } iomode; u_char *buf; int buf_len; + /* Interface to GPMC */ struct gpmc_nand_regs reg; - /* generated at runtime depending on ECC algorithm and layout selected */ - struct nand_ecclayout oobinfo; + struct gpmc_nand_ops *ops; + bool flash_bbt; /* fields specific for BCHx_HW ECC scheme */ struct device *elm_dev; - struct device_node *of_node; + /* NAND ready gpio */ + struct gpio_desc *ready_gpiod; }; static inline struct omap_nand_info *mtd_to_omap(struct mtd_info *mtd) @@ -208,7 +216,7 @@ static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode, */ val = ((cs << PREFETCH_CONFIG1_CS_SHIFT) | PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH | - (dma_mode << DMA_MPU_MODE_SHIFT) | (0x1 & is_write)); + (dma_mode << DMA_MPU_MODE_SHIFT) | (is_write & 0x1)); writel(val, info->reg.gpmc_prefetch_config1); /* Start the prefetch engine */ @@ -288,14 +296,13 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len) { struct omap_nand_info *info = mtd_to_omap(mtd); u_char *p = (u_char *)buf; - u32 status = 0; + bool status; while (len--) { iowrite8(*p++, info->nand.IO_ADDR_W); /* wait until buffer is available for write */ do { - status = readl(info->reg.gpmc_status) & - STATUS_BUFF_EMPTY; + status = info->ops->nand_writebuffer_empty(); } while (!status); } } @@ -323,7 +330,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len) { struct omap_nand_info *info = mtd_to_omap(mtd); u16 *p = (u16 *) buf; - u32 status = 0; + bool status; /* FIXME try bursts of writesw() or DMA ... */ len >>= 1; @@ -331,8 +338,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len) iowrite16(*p++, info->nand.IO_ADDR_W); /* wait until buffer is available for write */ do { - status = readl(info->reg.gpmc_status) & - STATUS_BUFF_EMPTY; + status = info->ops->nand_writebuffer_empty(); } while (!status); } } @@ -467,17 +473,8 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, int ret; u32 val; - if (addr >= high_memory) { - struct page *p1; - - if (((size_t)addr & PAGE_MASK) != - ((size_t)(addr + len - 1) & PAGE_MASK)) - goto out_copy; - p1 = vmalloc_to_page(addr); - if (!p1) - goto out_copy; - addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK); - } + if (!virt_addr_valid(addr)) + goto out_copy; sg_init_one(&sg, addr, len); n = dma_map_sg(info->dma->device->dev, &sg, 1, dir); @@ -497,6 +494,11 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, tx->callback_param = &info->comp; dmaengine_submit(tx); + init_completion(&info->comp); + + /* setup and start DMA using dma_addr */ + dma_async_issue_pending(info->dma); + /* configure and start prefetch transfer */ ret = omap_prefetch_enable(info->gpmc_cs, PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write, info); @@ -504,10 +506,6 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, /* PFPW engine is busy, use cpu copy method */ goto out_copy_unmap; - init_completion(&info->comp); - dma_async_issue_pending(info->dma); - - /* setup and start DMA using dma_addr */ wait_for_completion(&info->comp); tim = 0; limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS)); @@ -1017,21 +1015,16 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) } /** - * omap_dev_ready - calls the platform specific dev_ready function + * omap_dev_ready - checks the NAND Ready GPIO line * @mtd: MTD device structure + * + * Returns true if ready and false if busy. */ static int omap_dev_ready(struct mtd_info *mtd) { - unsigned int val = 0; struct omap_nand_info *info = mtd_to_omap(mtd); - val = readl(info->reg.gpmc_status); - - if ((val & 0x100) == 0x100) { - return 1; - } else { - return 0; - } + return gpiod_get_value(info->ready_gpiod); } /** @@ -1495,9 +1488,8 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required, int page) { - int i; + int ret; uint8_t *ecc_calc = chip->buffers->ecccalc; - uint32_t *eccpos = chip->ecc.layout->eccpos; /* Enable GPMC ecc engine */ chip->ecc.hwctl(mtd, NAND_ECC_WRITE); @@ -1508,8 +1500,10 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, /* Update ecc vector from GPMC result registers */ chip->ecc.calculate(mtd, buf, &ecc_calc[0]); - for (i = 0; i < chip->ecc.total; i++) - chip->oob_poi[eccpos[i]] = ecc_calc[i]; + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; /* Write ecc vector to OOB area */ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -1536,10 +1530,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, { uint8_t *ecc_calc = chip->buffers->ecccalc; uint8_t *ecc_code = chip->buffers->ecccode; - uint32_t *eccpos = chip->ecc.layout->eccpos; - uint8_t *oob = &chip->oob_poi[eccpos[0]]; - uint32_t oob_pos = mtd->writesize + chip->ecc.layout->eccpos[0]; - int stat; + int stat, ret; unsigned int max_bitflips = 0; /* Enable GPMC ecc engine */ @@ -1549,13 +1540,18 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, chip->read_buf(mtd, buf, mtd->writesize); /* Read oob bytes */ - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1); - chip->read_buf(mtd, oob, chip->ecc.total); + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, + mtd->writesize + BADBLOCK_MARKER_LENGTH, -1); + chip->read_buf(mtd, chip->oob_poi + BADBLOCK_MARKER_LENGTH, + chip->ecc.total); /* Calculate ecc bytes */ chip->ecc.calculate(mtd, buf, ecc_calc); - memcpy(ecc_code, &chip->oob_poi[eccpos[0]], chip->ecc.total); + ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; stat = chip->ecc.correct(mtd, buf, ecc_code, ecc_calc); @@ -1630,7 +1626,7 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info, "CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); return false; } - if (ecc_needs_elm && !is_elm_present(info, pdata->elm_of_node)) { + if (ecc_needs_elm && !is_elm_present(info, info->elm_of_node)) { dev_err(&info->pdev->dev, "ELM not available\n"); return false; } @@ -1638,43 +1634,227 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info, return true; } +static const char * const nand_xfer_types[] = { + [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", + [NAND_OMAP_POLLED] = "polled", + [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma", + [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq", +}; + +static int omap_get_dt_info(struct device *dev, struct omap_nand_info *info) +{ + struct device_node *child = dev->of_node; + int i; + const char *s; + u32 cs; + + if (of_property_read_u32(child, "reg", &cs) < 0) { + dev_err(dev, "reg not found in DT\n"); + return -EINVAL; + } + + info->gpmc_cs = cs; + + /* detect availability of ELM module. Won't be present pre-OMAP4 */ + info->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0); + if (!info->elm_of_node) + dev_dbg(dev, "ti,elm-id not in DT\n"); + + /* select ecc-scheme for NAND */ + if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) { + dev_err(dev, "ti,nand-ecc-opt not found\n"); + return -EINVAL; + } + + if (!strcmp(s, "sw")) { + info->ecc_opt = OMAP_ECC_HAM1_CODE_SW; + } else if (!strcmp(s, "ham1") || + !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) { + info->ecc_opt = OMAP_ECC_HAM1_CODE_HW; + } else if (!strcmp(s, "bch4")) { + if (info->elm_of_node) + info->ecc_opt = OMAP_ECC_BCH4_CODE_HW; + else + info->ecc_opt = OMAP_ECC_BCH4_CODE_HW_DETECTION_SW; + } else if (!strcmp(s, "bch8")) { + if (info->elm_of_node) + info->ecc_opt = OMAP_ECC_BCH8_CODE_HW; + else + info->ecc_opt = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW; + } else if (!strcmp(s, "bch16")) { + info->ecc_opt = OMAP_ECC_BCH16_CODE_HW; + } else { + dev_err(dev, "unrecognized value for ti,nand-ecc-opt\n"); + return -EINVAL; + } + + /* select data transfer mode */ + if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) { + for (i = 0; i < ARRAY_SIZE(nand_xfer_types); i++) { + if (!strcasecmp(s, nand_xfer_types[i])) { + info->xfer_type = i; + return 0; + } + } + + dev_err(dev, "unrecognized value for ti,nand-xfer-type\n"); + return -EINVAL; + } + + return 0; +} + +static int omap_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct omap_nand_info *info = mtd_to_omap(mtd); + struct nand_chip *chip = &info->nand; + int off = BADBLOCK_MARKER_LENGTH; + + if (info->ecc_opt == OMAP_ECC_HAM1_CODE_HW && + !(chip->options & NAND_BUSWIDTH_16)) + off = 1; + + if (section) + return -ERANGE; + + oobregion->offset = off; + oobregion->length = chip->ecc.total; + + return 0; +} + +static int omap_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct omap_nand_info *info = mtd_to_omap(mtd); + struct nand_chip *chip = &info->nand; + int off = BADBLOCK_MARKER_LENGTH; + + if (info->ecc_opt == OMAP_ECC_HAM1_CODE_HW && + !(chip->options & NAND_BUSWIDTH_16)) + off = 1; + + if (section) + return -ERANGE; + + off += chip->ecc.total; + if (off >= mtd->oobsize) + return -ERANGE; + + oobregion->offset = off; + oobregion->length = mtd->oobsize - off; + + return 0; +} + +static const struct mtd_ooblayout_ops omap_ooblayout_ops = { + .ecc = omap_ooblayout_ecc, + .free = omap_ooblayout_free, +}; + +static int omap_sw_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + int off = BADBLOCK_MARKER_LENGTH; + + if (section >= chip->ecc.steps) + return -ERANGE; + + /* + * When SW correction is employed, one OMAP specific marker byte is + * reserved after each ECC step. + */ + oobregion->offset = off + (section * (chip->ecc.bytes + 1)); + oobregion->length = chip->ecc.bytes; + + return 0; +} + +static int omap_sw_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + int off = BADBLOCK_MARKER_LENGTH; + + if (section) + return -ERANGE; + + /* + * When SW correction is employed, one OMAP specific marker byte is + * reserved after each ECC step. + */ + off += ((chip->ecc.bytes + 1) * chip->ecc.steps); + if (off >= mtd->oobsize) + return -ERANGE; + + oobregion->offset = off; + oobregion->length = mtd->oobsize - off; + + return 0; +} + +static const struct mtd_ooblayout_ops omap_sw_ooblayout_ops = { + .ecc = omap_sw_ooblayout_ecc, + .free = omap_sw_ooblayout_free, +}; + static int omap_nand_probe(struct platform_device *pdev) { struct omap_nand_info *info; - struct omap_nand_platform_data *pdata; + struct omap_nand_platform_data *pdata = NULL; struct mtd_info *mtd; struct nand_chip *nand_chip; - struct nand_ecclayout *ecclayout; int err; - int i; dma_cap_mask_t mask; unsigned sig; - unsigned oob_index; struct resource *res; - - pdata = dev_get_platdata(&pdev->dev); - if (pdata == NULL) { - dev_err(&pdev->dev, "platform data missing\n"); - return -ENODEV; - } + struct device *dev = &pdev->dev; + int min_oobbytes = BADBLOCK_MARKER_LENGTH; + int oobbytes_per_step; info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info), GFP_KERNEL); if (!info) return -ENOMEM; + info->pdev = pdev; + + if (dev->of_node) { + if (omap_get_dt_info(dev, info)) + return -EINVAL; + } else { + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "platform data missing\n"); + return -EINVAL; + } + + info->gpmc_cs = pdata->cs; + info->reg = pdata->reg; + info->ecc_opt = pdata->ecc_opt; + if (pdata->dev_ready) + dev_info(&pdev->dev, "pdata->dev_ready is deprecated\n"); + + info->xfer_type = pdata->xfer_type; + info->devsize = pdata->devsize; + info->elm_of_node = pdata->elm_of_node; + info->flash_bbt = pdata->flash_bbt; + } + platform_set_drvdata(pdev, info); + info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs); + if (!info->ops) { + dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n"); + return -ENODEV; + } - info->pdev = pdev; - info->gpmc_cs = pdata->cs; - info->reg = pdata->reg; - info->of_node = pdata->of_node; - info->ecc_opt = pdata->ecc_opt; nand_chip = &info->nand; mtd = nand_to_mtd(nand_chip); mtd->dev.parent = &pdev->dev; nand_chip->ecc.priv = NULL; - nand_set_flash_node(nand_chip, pdata->of_node); + nand_set_flash_node(nand_chip, dev->of_node); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res); @@ -1688,6 +1868,13 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R; nand_chip->cmd_ctrl = omap_hwcontrol; + info->ready_gpiod = devm_gpiod_get_optional(&pdev->dev, "rb", + GPIOD_IN); + if (IS_ERR(info->ready_gpiod)) { + dev_err(dev, "failed to get ready gpio\n"); + return PTR_ERR(info->ready_gpiod); + } + /* * If RDY/BSY line is connected to OMAP then use the omap ready * function and the generic nand_wait function which reads the status @@ -1695,7 +1882,7 @@ static int omap_nand_probe(struct platform_device *pdev) * chip delay which is slightly more than tR (AC Timing) of the NAND * device and read status register until you get a failure or success */ - if (pdata->dev_ready) { + if (info->ready_gpiod) { nand_chip->dev_ready = omap_dev_ready; nand_chip->chip_delay = 0; } else { @@ -1703,21 +1890,25 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->chip_delay = 50; } - if (pdata->flash_bbt) - nand_chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; - else - nand_chip->options |= NAND_SKIP_BBTSCAN; + if (info->flash_bbt) + nand_chip->bbt_options |= NAND_BBT_USE_FLASH; /* scan NAND device connected to chip controller */ - nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16; + nand_chip->options |= info->devsize & NAND_BUSWIDTH_16; if (nand_scan_ident(mtd, 1, NULL)) { - dev_err(&info->pdev->dev, "scan failed, may be bus-width mismatch\n"); + dev_err(&info->pdev->dev, + "scan failed, may be bus-width mismatch\n"); err = -ENXIO; goto return_error; } + if (nand_chip->bbt_options & NAND_BBT_USE_FLASH) + nand_chip->bbt_options |= NAND_BBT_NO_OOB; + else + nand_chip->options |= NAND_SKIP_BBTSCAN; + /* re-populate low-level callbacks based on xfer modes */ - switch (pdata->xfer_type) { + switch (info->xfer_type) { case NAND_OMAP_PREFETCH_POLLED: nand_chip->read_buf = omap_read_buf_pref; nand_chip->write_buf = omap_write_buf_pref; @@ -1797,7 +1988,7 @@ static int omap_nand_probe(struct platform_device *pdev) default: dev_err(&pdev->dev, - "xfer_type(%d) not supported!\n", pdata->xfer_type); + "xfer_type(%d) not supported!\n", info->xfer_type); err = -EINVAL; goto return_error; } @@ -1809,16 +2000,15 @@ static int omap_nand_probe(struct platform_device *pdev) /* * Bail out earlier to let NAND_ECC_SOFT code create its own - * ecclayout instead of using ours. + * ooblayout instead of using ours. */ if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) { nand_chip->ecc.mode = NAND_ECC_SOFT; + nand_chip->ecc.algo = NAND_ECC_HAMMING; goto scan_tail; } /* populate MTD interface based on ECC scheme */ - ecclayout = &info->oobinfo; - nand_chip->ecc.layout = ecclayout; switch (info->ecc_opt) { case OMAP_ECC_HAM1_CODE_HW: pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n"); @@ -1829,19 +2019,12 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.calculate = omap_calculate_ecc; nand_chip->ecc.hwctl = omap_enable_hwecc; nand_chip->ecc.correct = omap_correct_data; - /* define ECC layout */ - ecclayout->eccbytes = nand_chip->ecc.bytes * - (mtd->writesize / - nand_chip->ecc.size); - if (nand_chip->options & NAND_BUSWIDTH_16) - oob_index = BADBLOCK_MARKER_LENGTH; - else - oob_index = 1; - for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) - ecclayout->eccpos[i] = oob_index; - /* no reserved-marker in ecclayout for this ecc-scheme */ - ecclayout->oobfree->offset = - ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + mtd_set_ooblayout(mtd, &omap_ooblayout_ops); + oobbytes_per_step = nand_chip->ecc.bytes; + + if (!(nand_chip->options & NAND_BUSWIDTH_16)) + min_oobbytes = 1; + break; case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: @@ -1853,19 +2036,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = nand_bch_correct_data; nand_chip->ecc.calculate = omap_calculate_ecc_bch; - /* define ECC layout */ - ecclayout->eccbytes = nand_chip->ecc.bytes * - (mtd->writesize / - nand_chip->ecc.size); - oob_index = BADBLOCK_MARKER_LENGTH; - for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) { - ecclayout->eccpos[i] = oob_index; - if (((i + 1) % nand_chip->ecc.bytes) == 0) - oob_index++; - } - /* include reserved-marker in ecclayout->oobfree calculation */ - ecclayout->oobfree->offset = 1 + - ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); + /* Reserve one byte for the OMAP marker */ + oobbytes_per_step = nand_chip->ecc.bytes + 1; /* software bch library is used for locating errors */ nand_chip->ecc.priv = nand_bch_init(mtd); if (!nand_chip->ecc.priv) { @@ -1887,16 +2060,8 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; - /* define ECC layout */ - ecclayout->eccbytes = nand_chip->ecc.bytes * - (mtd->writesize / - nand_chip->ecc.size); - oob_index = BADBLOCK_MARKER_LENGTH; - for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) - ecclayout->eccpos[i] = oob_index; - /* reserved marker already included in ecclayout->eccbytes */ - ecclayout->oobfree->offset = - ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + mtd_set_ooblayout(mtd, &omap_ooblayout_ops); + oobbytes_per_step = nand_chip->ecc.bytes; err = elm_config(info->elm_dev, BCH4_ECC, mtd->writesize / nand_chip->ecc.size, @@ -1914,19 +2079,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = nand_bch_correct_data; nand_chip->ecc.calculate = omap_calculate_ecc_bch; - /* define ECC layout */ - ecclayout->eccbytes = nand_chip->ecc.bytes * - (mtd->writesize / - nand_chip->ecc.size); - oob_index = BADBLOCK_MARKER_LENGTH; - for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) { - ecclayout->eccpos[i] = oob_index; - if (((i + 1) % nand_chip->ecc.bytes) == 0) - oob_index++; - } - /* include reserved-marker in ecclayout->oobfree calculation */ - ecclayout->oobfree->offset = 1 + - ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); + /* Reserve one byte for the OMAP marker */ + oobbytes_per_step = nand_chip->ecc.bytes + 1; /* software bch library is used for locating errors */ nand_chip->ecc.priv = nand_bch_init(mtd); if (!nand_chip->ecc.priv) { @@ -1948,6 +2103,8 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + mtd_set_ooblayout(mtd, &omap_ooblayout_ops); + oobbytes_per_step = nand_chip->ecc.bytes; err = elm_config(info->elm_dev, BCH8_ECC, mtd->writesize / nand_chip->ecc.size, @@ -1955,16 +2112,6 @@ static int omap_nand_probe(struct platform_device *pdev) if (err < 0) goto return_error; - /* define ECC layout */ - ecclayout->eccbytes = nand_chip->ecc.bytes * - (mtd->writesize / - nand_chip->ecc.size); - oob_index = BADBLOCK_MARKER_LENGTH; - for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) - ecclayout->eccpos[i] = oob_index; - /* reserved marker already included in ecclayout->eccbytes */ - ecclayout->oobfree->offset = - ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; break; case OMAP_ECC_BCH16_CODE_HW: @@ -1978,6 +2125,8 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + mtd_set_ooblayout(mtd, &omap_ooblayout_ops); + oobbytes_per_step = nand_chip->ecc.bytes; err = elm_config(info->elm_dev, BCH16_ECC, mtd->writesize / nand_chip->ecc.size, @@ -1985,16 +2134,6 @@ static int omap_nand_probe(struct platform_device *pdev) if (err < 0) goto return_error; - /* define ECC layout */ - ecclayout->eccbytes = nand_chip->ecc.bytes * - (mtd->writesize / - nand_chip->ecc.size); - oob_index = BADBLOCK_MARKER_LENGTH; - for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) - ecclayout->eccpos[i] = oob_index; - /* reserved marker already included in ecclayout->eccbytes */ - ecclayout->oobfree->offset = - ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; break; default: dev_err(&info->pdev->dev, "invalid or unsupported ECC scheme\n"); @@ -2002,13 +2141,13 @@ static int omap_nand_probe(struct platform_device *pdev) goto return_error; } - /* all OOB bytes from oobfree->offset till end off OOB are free */ - ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset; /* check if NAND device's OOB is enough to store ECC signatures */ - if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) { + min_oobbytes += (oobbytes_per_step * + (mtd->writesize / nand_chip->ecc.size)); + if (mtd->oobsize < min_oobbytes) { dev_err(&info->pdev->dev, "not enough OOB bytes required = %d, available=%d\n", - ecclayout->eccbytes, mtd->oobsize); + min_oobbytes, mtd->oobsize); err = -EINVAL; goto return_error; } @@ -2020,7 +2159,10 @@ scan_tail: goto return_error; } - mtd_device_register(mtd, pdata->parts, pdata->nr_parts); + if (dev->of_node) + mtd_device_register(mtd, NULL, 0); + else + mtd_device_register(mtd, pdata->parts, pdata->nr_parts); platform_set_drvdata(pdev, mtd); @@ -2051,11 +2193,17 @@ static int omap_nand_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id omap_nand_ids[] = { + { .compatible = "ti,omap2-nand", }, + {}, +}; + static struct platform_driver omap_nand_driver = { .probe = omap_nand_probe, .remove = omap_nand_remove, .driver = { .name = DRIVER_NAME, + .of_match_table = of_match_ptr(omap_nand_ids), }, }; diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index d4614bfbfed6..40a7c4a2cf0d 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -130,6 +130,7 @@ static int __init orion_nand_probe(struct platform_device *pdev) nc->cmd_ctrl = orion_nand_cmd_ctrl; nc->read_buf = orion_nand_read_buf; nc->ecc.mode = NAND_ECC_SOFT; + nc->ecc.algo = NAND_ECC_HAMMING; if (board->chip_delay) nc->chip_delay = board->chip_delay; diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 3ab53ca53cca..5de7591b0510 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -92,8 +92,9 @@ int pasemi_device_ready(struct mtd_info *mtd) static int pasemi_nand_probe(struct platform_device *ofdev) { + struct device *dev = &ofdev->dev; struct pci_dev *pdev; - struct device_node *np = ofdev->dev.of_node; + struct device_node *np = dev->of_node; struct resource res; struct nand_chip *chip; int err = 0; @@ -107,13 +108,11 @@ static int pasemi_nand_probe(struct platform_device *ofdev) if (pasemi_nand_mtd) return -ENODEV; - pr_debug("pasemi_nand at %pR\n", &res); + dev_dbg(dev, "pasemi_nand at %pR\n", &res); /* Allocate memory for MTD device structure and private data */ chip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL); if (!chip) { - printk(KERN_WARNING - "Unable to allocate PASEMI NAND MTD device structure\n"); err = -ENOMEM; goto out; } @@ -121,7 +120,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev) pasemi_nand_mtd = nand_to_mtd(chip); /* Link the private data with the MTD structure */ - pasemi_nand_mtd->dev.parent = &ofdev->dev; + pasemi_nand_mtd->dev.parent = dev; chip->IO_ADDR_R = of_iomap(np, 0); chip->IO_ADDR_W = chip->IO_ADDR_R; @@ -151,6 +150,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev) chip->write_buf = pasemi_write_buf; chip->chip_delay = 0; chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_HAMMING; /* Enable the following for a flash based bad block table */ chip->bbt_options = NAND_BBT_USE_FLASH; @@ -162,13 +162,13 @@ static int pasemi_nand_probe(struct platform_device *ofdev) } if (mtd_device_register(pasemi_nand_mtd, NULL, 0)) { - printk(KERN_ERR "pasemi_nand: Unable to register MTD device\n"); + dev_err(dev, "Unable to register MTD device\n"); err = -ENODEV; goto out_lpc; } - printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n", - res.start, lpcctl); + dev_info(dev, "PA Semi NAND flash at %pR, control at I/O %x\n", &res, + lpcctl); return 0; diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index e4e50da30444..415a53a0deeb 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -74,6 +74,7 @@ static int plat_nand_probe(struct platform_device *pdev) data->chip.ecc.hwctl = pdata->ctrl.hwcontrol; data->chip.ecc.mode = NAND_ECC_SOFT; + data->chip.ecc.algo = NAND_ECC_HAMMING; platform_set_drvdata(pdev, data); diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index d6508856da99..436dd6dc11f4 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -29,7 +29,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_mtd.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> #define CHIP_DELAY_TIMEOUT msecs_to_jiffies(200) @@ -324,6 +323,62 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = { { 0xba20, 16, 16, &timing[3] }, }; +static int pxa3xx_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct pxa3xx_nand_host *host = nand_get_controller_data(chip); + struct pxa3xx_nand_info *info = host->info_data; + int nchunks = mtd->writesize / info->chunk_size; + + if (section >= nchunks) + return -ERANGE; + + oobregion->offset = ((info->ecc_size + info->spare_size) * section) + + info->spare_size; + oobregion->length = info->ecc_size; + + return 0; +} + +static int pxa3xx_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct pxa3xx_nand_host *host = nand_get_controller_data(chip); + struct pxa3xx_nand_info *info = host->info_data; + int nchunks = mtd->writesize / info->chunk_size; + + if (section >= nchunks) + return -ERANGE; + + if (!info->spare_size) + return 0; + + oobregion->offset = section * (info->ecc_size + info->spare_size); + oobregion->length = info->spare_size; + if (!section) { + /* + * Bootrom looks in bytes 0 & 5 for bad blocks for the + * 4KB page / 4bit BCH combination. + */ + if (mtd->writesize == 4096 && info->chunk_size == 2048) { + oobregion->offset += 6; + oobregion->length -= 6; + } else { + oobregion->offset += 2; + oobregion->length -= 2; + } + } + + return 0; +} + +static const struct mtd_ooblayout_ops pxa3xx_ooblayout_ops = { + .ecc = pxa3xx_ooblayout_ecc, + .free = pxa3xx_ooblayout_free, +}; + static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' }; static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' }; @@ -347,41 +402,6 @@ static struct nand_bbt_descr bbt_mirror_descr = { .pattern = bbt_mirror_pattern }; -static struct nand_ecclayout ecc_layout_2KB_bch4bit = { - .eccbytes = 32, - .eccpos = { - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63}, - .oobfree = { {2, 30} } -}; - -static struct nand_ecclayout ecc_layout_4KB_bch4bit = { - .eccbytes = 64, - .eccpos = { - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 96, 97, 98, 99, 100, 101, 102, 103, - 104, 105, 106, 107, 108, 109, 110, 111, - 112, 113, 114, 115, 116, 117, 118, 119, - 120, 121, 122, 123, 124, 125, 126, 127}, - /* Bootrom looks in bytes 0 & 5 for bad blocks */ - .oobfree = { {6, 26}, { 64, 32} } -}; - -static struct nand_ecclayout ecc_layout_4KB_bch8bit = { - .eccbytes = 128, - .eccpos = { - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63}, - .oobfree = { } -}; - #define NDTR0_tCH(c) (min((c), 7) << 19) #define NDTR0_tCS(c) (min((c), 7) << 16) #define NDTR0_tWH(c) (min((c), 7) << 11) @@ -1546,9 +1566,12 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) } static int pxa_ecc_init(struct pxa3xx_nand_info *info, - struct nand_ecc_ctrl *ecc, + struct mtd_info *mtd, int strength, int ecc_stepsize, int page_size) { + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) { info->nfullchunks = 1; info->ntotalchunks = 1; @@ -1582,7 +1605,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info, info->ecc_size = 32; ecc->mode = NAND_ECC_HW; ecc->size = info->chunk_size; - ecc->layout = &ecc_layout_2KB_bch4bit; + mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops); ecc->strength = 16; } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) { @@ -1594,7 +1617,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info, info->ecc_size = 32; ecc->mode = NAND_ECC_HW; ecc->size = info->chunk_size; - ecc->layout = &ecc_layout_4KB_bch4bit; + mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops); ecc->strength = 16; /* @@ -1612,7 +1635,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info, info->ecc_size = 32; ecc->mode = NAND_ECC_HW; ecc->size = info->chunk_size; - ecc->layout = &ecc_layout_4KB_bch8bit; + mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops); ecc->strength = 16; } else { dev_err(&info->pdev->dev, @@ -1651,6 +1674,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) nand_writel(info, NDECCCTRL, 0x0); + if (pdata->flash_bbt) + chip->bbt_options |= NAND_BBT_USE_FLASH; + + chip->ecc.strength = pdata->ecc_strength; + chip->ecc.size = pdata->ecc_step_size; + if (nand_scan_ident(mtd, 1, NULL)) return -ENODEV; @@ -1663,13 +1692,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) } } - if (pdata->flash_bbt) { + if (chip->bbt_options & NAND_BBT_USE_FLASH) { /* * We'll use a bad block table stored in-flash and don't * allow writing the bad block marker to the flash. */ - chip->bbt_options |= NAND_BBT_USE_FLASH | - NAND_BBT_NO_OOB_BBM; + chip->bbt_options |= NAND_BBT_NO_OOB_BBM; chip->bbt_td = &bbt_main_descr; chip->bbt_md = &bbt_mirror_descr; } @@ -1689,10 +1717,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) } } - if (pdata->ecc_strength && pdata->ecc_step_size) { - ecc_strength = pdata->ecc_strength; - ecc_step = pdata->ecc_step_size; - } else { + ecc_strength = chip->ecc.strength; + ecc_step = chip->ecc.size; + if (!ecc_strength || !ecc_step) { ecc_strength = chip->ecc_strength_ds; ecc_step = chip->ecc_step_ds; } @@ -1703,7 +1730,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) ecc_step = 512; } - ret = pxa_ecc_init(info, &chip->ecc, ecc_strength, + ret = pxa_ecc_init(info, mtd, ecc_strength, ecc_step, mtd->writesize); if (ret) return ret; @@ -1903,15 +1930,6 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) if (of_get_property(np, "marvell,nand-keep-config", NULL)) pdata->keep_config = 1; of_property_read_u32(np, "num-cs", &pdata->num_cs); - pdata->flash_bbt = of_get_nand_on_flash_bbt(np); - - pdata->ecc_strength = of_get_nand_ecc_strength(np); - if (pdata->ecc_strength < 0) - pdata->ecc_strength = 0; - - pdata->ecc_step_size = of_get_nand_ecc_step_size(np); - if (pdata->ecc_step_size < 0) - pdata->ecc_step_size = 0; pdev->dev.platform_data = pdata; diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c index f550a57e6eea..de7d28e62d4e 100644 --- a/drivers/mtd/nand/qcom_nandc.c +++ b/drivers/mtd/nand/qcom_nandc.c @@ -21,7 +21,6 @@ #include <linux/mtd/partitions.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_mtd.h> #include <linux/delay.h> /* NANDc reg offsets */ @@ -1437,7 +1436,6 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); struct nand_ecc_ctrl *ecc = &chip->ecc; u8 *oob = chip->oob_poi; - int free_boff; int data_size, oob_size; int ret, status = 0; @@ -1451,12 +1449,11 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, /* calculate the data and oob size for the last codeword/step */ data_size = ecc->size - ((ecc->steps - 1) << 2); - oob_size = ecc->steps << 2; - - free_boff = ecc->layout->oobfree[0].offset; + oob_size = mtd->oobavail; /* override new oob content to last codeword */ - memcpy(nandc->data_buffer + data_size, oob + free_boff, oob_size); + mtd_ooblayout_get_databytes(mtd, nandc->data_buffer + data_size, oob, + 0, mtd->oobavail); set_address(host, host->cw_size * (ecc->steps - 1), page); update_rw_regs(host, 1, false); @@ -1710,61 +1707,52 @@ static void qcom_nandc_select_chip(struct mtd_info *mtd, int chipnr) * This layout is read as is when ECC is disabled. When ECC is enabled, the * inaccessible Bad Block byte(s) are ignored when we write to a page/oob, * and assumed as 0xffs when we read a page/oob. The ECC, unused and - * dummy/real bad block bytes are grouped as ecc bytes in nand_ecclayout (i.e, - * ecc->bytes is the sum of the three). + * dummy/real bad block bytes are grouped as ecc bytes (i.e, ecc->bytes is + * the sum of the three). */ - -static struct nand_ecclayout * -qcom_nand_create_layout(struct qcom_nand_host *host) +static int qcom_nand_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) { - struct nand_chip *chip = &host->chip; - struct mtd_info *mtd = nand_to_mtd(chip); - struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_host *host = to_qcom_nand_host(chip); struct nand_ecc_ctrl *ecc = &chip->ecc; - struct nand_ecclayout *layout; - int i, j, steps, pos = 0, shift = 0; - layout = devm_kzalloc(nandc->dev, sizeof(*layout), GFP_KERNEL); - if (!layout) - return NULL; - - steps = mtd->writesize / ecc->size; - layout->eccbytes = steps * ecc->bytes; + if (section > 1) + return -ERANGE; - layout->oobfree[0].offset = (steps - 1) * ecc->bytes + host->bbm_size; - layout->oobfree[0].length = steps << 2; - - /* - * the oob bytes in the first n - 1 codewords are all grouped together - * in the format: - * DUMMY_BBM + UNUSED + ECC - */ - for (i = 0; i < steps - 1; i++) { - for (j = 0; j < ecc->bytes; j++) - layout->eccpos[pos++] = i * ecc->bytes + j; + if (!section) { + oobregion->length = (ecc->bytes * (ecc->steps - 1)) + + host->bbm_size; + oobregion->offset = 0; + } else { + oobregion->length = host->ecc_bytes_hw + host->spare_bytes; + oobregion->offset = mtd->oobsize - oobregion->length; } - /* - * the oob bytes in the last codeword are grouped in the format: - * BBM + FREE OOB + UNUSED + ECC - */ + return 0; +} - /* fill up the bbm positions */ - for (j = 0; j < host->bbm_size; j++) - layout->eccpos[pos++] = i * ecc->bytes + j; +static int qcom_nand_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; - /* - * fill up the ecc and reserved positions, their indices are offseted - * by the free oob region - */ - shift = layout->oobfree[0].length + host->bbm_size; + if (section) + return -ERANGE; - for (j = 0; j < (host->ecc_bytes_hw + host->spare_bytes); j++) - layout->eccpos[pos++] = i * ecc->bytes + shift + j; + oobregion->length = ecc->steps * 4; + oobregion->offset = ((ecc->steps - 1) * ecc->bytes) + host->bbm_size; - return layout; + return 0; } +static const struct mtd_ooblayout_ops qcom_nand_ooblayout_ops = { + .ecc = qcom_nand_ooblayout_ecc, + .free = qcom_nand_ooblayout_free, +}; + static int qcom_nand_host_setup(struct qcom_nand_host *host) { struct nand_chip *chip = &host->chip; @@ -1851,9 +1839,7 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host) ecc->mode = NAND_ECC_HW; - ecc->layout = qcom_nand_create_layout(host); - if (!ecc->layout) - return -ENOMEM; + mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops); cwperpage = mtd->writesize / ecc->size; diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 9c9397b54b2c..d9309cf0ce2e 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -84,11 +84,33 @@ /* new oob placement block for use with hardware ecc generation */ +static int s3c2410_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 0; + oobregion->length = 3; + + return 0; +} + +static int s3c2410_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 8; + oobregion->length = 8; + + return 0; +} -static struct nand_ecclayout nand_hw_eccoob = { - .eccbytes = 3, - .eccpos = {0, 1, 2}, - .oobfree = {{8, 8}} +static const struct mtd_ooblayout_ops s3c2410_ooblayout_ops = { + .ecc = s3c2410_ooblayout_ecc, + .free = s3c2410_ooblayout_free, }; /* controller and mtd information */ @@ -542,7 +564,8 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, diff0 |= (diff1 << 8); diff0 |= (diff2 << 16); - if ((diff0 & ~(1<<fls(diff0))) == 0) + /* equal to "(diff0 & ~(1 << __ffs(diff0)))" */ + if ((diff0 & (diff0 - 1)) == 0) return 1; return -1; @@ -859,6 +882,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, } #else chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_HAMMING; #endif if (set->disable_ecc) @@ -919,7 +943,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, } else { chip->ecc.size = 512; chip->ecc.bytes = 3; - chip->ecc.layout = &nand_hw_eccoob; + mtd_set_ooblayout(nand_to_mtd(chip), &s3c2410_ooblayout_ops); } } diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 4814402902f9..6fa3bcd59769 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -31,7 +31,6 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_mtd.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/sh_dma.h> @@ -43,26 +42,73 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/sh_flctl.h> -static struct nand_ecclayout flctl_4secc_oob_16 = { - .eccbytes = 10, - .eccpos = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9}, - .oobfree = { - {.offset = 12, - . length = 4} }, +static int flctl_4secc_ooblayout_sp_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + + if (section) + return -ERANGE; + + oobregion->offset = 0; + oobregion->length = chip->ecc.bytes; + + return 0; +} + +static int flctl_4secc_ooblayout_sp_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 12; + oobregion->length = 4; + + return 0; +} + +static const struct mtd_ooblayout_ops flctl_4secc_oob_smallpage_ops = { + .ecc = flctl_4secc_ooblayout_sp_ecc, + .free = flctl_4secc_ooblayout_sp_free, }; -static struct nand_ecclayout flctl_4secc_oob_64 = { - .eccbytes = 4 * 10, - .eccpos = { - 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, - 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, - 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, - 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 }, - .oobfree = { - {.offset = 2, .length = 4}, - {.offset = 16, .length = 6}, - {.offset = 32, .length = 6}, - {.offset = 48, .length = 6} }, +static int flctl_4secc_ooblayout_lp_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + + if (section >= chip->ecc.steps) + return -ERANGE; + + oobregion->offset = (section * 16) + 6; + oobregion->length = chip->ecc.bytes; + + return 0; +} + +static int flctl_4secc_ooblayout_lp_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + + if (section >= chip->ecc.steps) + return -ERANGE; + + oobregion->offset = section * 16; + oobregion->length = 6; + + if (!section) { + oobregion->offset += 2; + oobregion->length -= 2; + } + + return 0; +} + +static const struct mtd_ooblayout_ops flctl_4secc_oob_largepage_ops = { + .ecc = flctl_4secc_ooblayout_lp_ecc, + .free = flctl_4secc_ooblayout_lp_free, }; static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; @@ -987,10 +1033,10 @@ static int flctl_chip_init_tail(struct mtd_info *mtd) if (flctl->hwecc) { if (mtd->writesize == 512) { - chip->ecc.layout = &flctl_4secc_oob_16; + mtd_set_ooblayout(mtd, &flctl_4secc_oob_smallpage_ops); chip->badblock_pattern = &flctl_4secc_smallpage; } else { - chip->ecc.layout = &flctl_4secc_oob_64; + mtd_set_ooblayout(mtd, &flctl_4secc_oob_largepage_ops); chip->badblock_pattern = &flctl_4secc_largepage; } @@ -1005,6 +1051,7 @@ static int flctl_chip_init_tail(struct mtd_info *mtd) flctl->flcmncr_base |= _4ECCEN; } else { chip->ecc.mode = NAND_ECC_SOFT; + chip->ecc.algo = NAND_ECC_HAMMING; } return 0; @@ -1044,8 +1091,6 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev) const struct of_device_id *match; struct flctl_soc_config *config; struct sh_flctl_platform_data *pdata; - struct device_node *dn = dev->of_node; - int ret; match = of_match_device(of_flctl_match, dev); if (match) @@ -1065,15 +1110,6 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev) pdata->has_hwecc = config->has_hwecc; pdata->use_holden = config->use_holden; - /* parse user defined options */ - ret = of_get_nand_bus_width(dn); - if (ret == 16) - pdata->flcmncr_val |= SEL_16BIT; - else if (ret != 8) { - dev_err(dev, "%s: invalid bus width\n", __func__); - return NULL; - } - return pdata; } @@ -1136,15 +1172,14 @@ static int flctl_probe(struct platform_device *pdev) nand->chip_delay = 20; nand->read_byte = flctl_read_byte; + nand->read_word = flctl_read_word; nand->write_buf = flctl_write_buf; nand->read_buf = flctl_read_buf; nand->select_chip = flctl_select_chip; nand->cmdfunc = flctl_cmdfunc; - if (pdata->flcmncr_val & SEL_16BIT) { + if (pdata->flcmncr_val & SEL_16BIT) nand->options |= NAND_BUSWIDTH_16; - nand->read_word = flctl_read_word; - } pm_runtime_enable(&pdev->dev); pm_runtime_resume(&pdev->dev); @@ -1155,6 +1190,16 @@ static int flctl_probe(struct platform_device *pdev) if (ret) goto err_chip; + if (nand->options & NAND_BUSWIDTH_16) { + /* + * NAND_BUSWIDTH_16 may have been set by nand_scan_ident(). + * Add the SEL_16BIT flag in pdata->flcmncr_val and re-assign + * flctl->flcmncr_base to pdata->flcmncr_val. + */ + pdata->flcmncr_val |= SEL_16BIT; + flctl->flcmncr_base = pdata->flcmncr_val; + } + ret = flctl_chip_init_tail(flctl_mtd); if (ret) goto err_chip; diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index b7d1b55a160b..064ca1757589 100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c @@ -148,6 +148,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev) /* Link the private data with the MTD structure */ mtd = nand_to_mtd(this); mtd->dev.parent = &pdev->dev; + mtd_set_ooblayout(mtd, data->ecc_layout); platform_set_drvdata(pdev, sharpsl); @@ -170,7 +171,6 @@ static int sharpsl_nand_probe(struct platform_device *pdev) this->ecc.bytes = 3; this->ecc.strength = 1; this->badblock_pattern = data->badblock_pattern; - this->ecc.layout = data->ecc_layout; this->ecc.hwctl = sharpsl_nand_enable_hwecc; this->ecc.calculate = sharpsl_nand_calculate_ecc; this->ecc.correct = nand_correct_data; diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c index c514740f9a83..5939dff253c2 100644 --- a/drivers/mtd/nand/sm_common.c +++ b/drivers/mtd/nand/sm_common.c @@ -12,14 +12,47 @@ #include <linux/sizes.h> #include "sm_common.h" -static struct nand_ecclayout nand_oob_sm = { - .eccbytes = 6, - .eccpos = {8, 9, 10, 13, 14, 15}, - .oobfree = { - {.offset = 0 , .length = 4}, /* reserved */ - {.offset = 6 , .length = 2}, /* LBA1 */ - {.offset = 11, .length = 2} /* LBA2 */ +static int oob_sm_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 1) + return -ERANGE; + + oobregion->length = 3; + oobregion->offset = ((section + 1) * 8) - 3; + + return 0; +} + +static int oob_sm_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + /* reserved */ + oobregion->offset = 0; + oobregion->length = 4; + break; + case 1: + /* LBA1 */ + oobregion->offset = 6; + oobregion->length = 2; + break; + case 2: + /* LBA2 */ + oobregion->offset = 11; + oobregion->length = 2; + break; + default: + return -ERANGE; } + + return 0; +} + +static const struct mtd_ooblayout_ops oob_sm_ops = { + .ecc = oob_sm_ooblayout_ecc, + .free = oob_sm_ooblayout_free, }; /* NOTE: This layout is is not compatabable with SmartMedia, */ @@ -28,15 +61,43 @@ static struct nand_ecclayout nand_oob_sm = { /* If you use smftl, it will bypass this and work correctly */ /* If you not, then you break SmartMedia compliance anyway */ -static struct nand_ecclayout nand_oob_sm_small = { - .eccbytes = 3, - .eccpos = {0, 1, 2}, - .oobfree = { - {.offset = 3 , .length = 2}, /* reserved */ - {.offset = 6 , .length = 2}, /* LBA1 */ +static int oob_sm_small_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->length = 3; + oobregion->offset = 0; + + return 0; +} + +static int oob_sm_small_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + /* reserved */ + oobregion->offset = 3; + oobregion->length = 2; + break; + case 1: + /* LBA1 */ + oobregion->offset = 6; + oobregion->length = 2; + break; + default: + return -ERANGE; } -}; + return 0; +} + +static const struct mtd_ooblayout_ops oob_sm_small_ops = { + .ecc = oob_sm_small_ooblayout_ecc, + .free = oob_sm_small_ooblayout_free, +}; static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs) { @@ -121,9 +182,9 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia) /* ECC layout */ if (mtd->writesize == SM_SECTOR_SIZE) - chip->ecc.layout = &nand_oob_sm; + mtd_set_ooblayout(mtd, &oob_sm_ops); else if (mtd->writesize == SM_SMALL_PAGE) - chip->ecc.layout = &nand_oob_sm_small; + mtd_set_ooblayout(mtd, &oob_sm_small_ops); else return -ENODEV; diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c index e3305f9dd6fb..888fd314c62a 100644 --- a/drivers/mtd/nand/socrates_nand.c +++ b/drivers/mtd/nand/socrates_nand.c @@ -180,6 +180,7 @@ static int socrates_nand_probe(struct platform_device *ofdev) nand_chip->dev_ready = socrates_nand_device_ready; nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */ + nand_chip->ecc.algo = NAND_ECC_HAMMING; /* TODO: I have no idea what real delay is. */ nand_chip->chip_delay = 20; /* 20us command delay time */ diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index 1c03eee44f3d..a83a690688b4 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -30,7 +30,6 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_gpio.h> -#include <linux/of_mtd.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -39,7 +38,7 @@ #include <linux/dmaengine.h> #include <linux/gpio.h> #include <linux/interrupt.h> -#include <linux/io.h> +#include <linux/iopoll.h> #define NFC_REG_CTL 0x0000 #define NFC_REG_ST 0x0004 @@ -155,7 +154,7 @@ /* define bit use in NFC_ECC_ST */ #define NFC_ECC_ERR(x) BIT(x) #define NFC_ECC_PAT_FOUND(x) BIT(x + 16) -#define NFC_ECC_ERR_CNT(b, x) (((x) >> ((b) * 8)) & 0xff) +#define NFC_ECC_ERR_CNT(b, x) (((x) >> (((b) % 4) * 8)) & 0xff) #define NFC_DEFAULT_TIMEOUT_MS 1000 @@ -212,12 +211,9 @@ struct sunxi_nand_chip_sel { * sunxi HW ECC infos: stores information related to HW ECC support * * @mode: the sunxi ECC mode field deduced from ECC requirements - * @layout: the OOB layout depending on the ECC requirements and the - * selected ECC mode */ struct sunxi_nand_hw_ecc { int mode; - struct nand_ecclayout layout; }; /* @@ -239,6 +235,10 @@ struct sunxi_nand_chip { u32 timing_cfg; u32 timing_ctl; int selected; + int addr_cycles; + u32 addr[2]; + int cmd_cycles; + u8 cmd[2]; int nsels; struct sunxi_nand_chip_sel sels[0]; }; @@ -298,54 +298,71 @@ static irqreturn_t sunxi_nfc_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static int sunxi_nfc_wait_int(struct sunxi_nfc *nfc, u32 flags, - unsigned int timeout_ms) +static int sunxi_nfc_wait_events(struct sunxi_nfc *nfc, u32 events, + bool use_polling, unsigned int timeout_ms) { - init_completion(&nfc->complete); + int ret; - writel(flags, nfc->regs + NFC_REG_INT); + if (events & ~NFC_INT_MASK) + return -EINVAL; if (!timeout_ms) timeout_ms = NFC_DEFAULT_TIMEOUT_MS; - if (!wait_for_completion_timeout(&nfc->complete, - msecs_to_jiffies(timeout_ms))) { - dev_err(nfc->dev, "wait interrupt timedout\n"); - return -ETIMEDOUT; + if (!use_polling) { + init_completion(&nfc->complete); + + writel(events, nfc->regs + NFC_REG_INT); + + ret = wait_for_completion_timeout(&nfc->complete, + msecs_to_jiffies(timeout_ms)); + + writel(0, nfc->regs + NFC_REG_INT); + } else { + u32 status; + + ret = readl_poll_timeout(nfc->regs + NFC_REG_ST, status, + (status & events) == events, 1, + timeout_ms * 1000); } - return 0; + writel(events & NFC_INT_MASK, nfc->regs + NFC_REG_ST); + + if (ret) + dev_err(nfc->dev, "wait interrupt timedout\n"); + + return ret; } static int sunxi_nfc_wait_cmd_fifo_empty(struct sunxi_nfc *nfc) { - unsigned long timeout = jiffies + - msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS); + u32 status; + int ret; - do { - if (!(readl(nfc->regs + NFC_REG_ST) & NFC_CMD_FIFO_STATUS)) - return 0; - } while (time_before(jiffies, timeout)); + ret = readl_poll_timeout(nfc->regs + NFC_REG_ST, status, + !(status & NFC_CMD_FIFO_STATUS), 1, + NFC_DEFAULT_TIMEOUT_MS * 1000); + if (ret) + dev_err(nfc->dev, "wait for empty cmd FIFO timedout\n"); - dev_err(nfc->dev, "wait for empty cmd FIFO timedout\n"); - return -ETIMEDOUT; + return ret; } static int sunxi_nfc_rst(struct sunxi_nfc *nfc) { - unsigned long timeout = jiffies + - msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS); + u32 ctl; + int ret; writel(0, nfc->regs + NFC_REG_ECC_CTL); writel(NFC_RESET, nfc->regs + NFC_REG_CTL); - do { - if (!(readl(nfc->regs + NFC_REG_CTL) & NFC_RESET)) - return 0; - } while (time_before(jiffies, timeout)); + ret = readl_poll_timeout(nfc->regs + NFC_REG_CTL, ctl, + !(ctl & NFC_RESET), 1, + NFC_DEFAULT_TIMEOUT_MS * 1000); + if (ret) + dev_err(nfc->dev, "wait for NAND controller reset timedout\n"); - dev_err(nfc->dev, "wait for NAND controller reset timedout\n"); - return -ETIMEDOUT; + return ret; } static int sunxi_nfc_dev_ready(struct mtd_info *mtd) @@ -354,7 +371,6 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd) struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); struct sunxi_nand_rb *rb; - unsigned long timeo = (sunxi_nand->nand.state == FL_ERASING ? 400 : 20); int ret; if (sunxi_nand->selected < 0) @@ -366,12 +382,6 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd) case RB_NATIVE: ret = !!(readl(nfc->regs + NFC_REG_ST) & NFC_RB_STATE(rb->info.nativeid)); - if (ret) - break; - - sunxi_nfc_wait_int(nfc, NFC_RB_B2R, timeo); - ret = !!(readl(nfc->regs + NFC_REG_ST) & - NFC_RB_STATE(rb->info.nativeid)); break; case RB_GPIO: ret = gpio_get_value(rb->info.gpio); @@ -407,7 +417,7 @@ static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip) sel = &sunxi_nand->sels[chip]; ctl |= NFC_CE_SEL(sel->cs) | NFC_EN | - NFC_PAGE_SHIFT(nand->page_shift - 10); + NFC_PAGE_SHIFT(nand->page_shift); if (sel->rb.type == RB_NONE) { nand->dev_ready = NULL; } else { @@ -452,7 +462,7 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD; writel(tmp, nfc->regs + NFC_REG_CMD); - ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); if (ret) break; @@ -487,7 +497,7 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, NFC_ACCESS_DIR; writel(tmp, nfc->regs + NFC_REG_CMD); - ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); if (ret) break; @@ -511,32 +521,54 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat, struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); int ret; - u32 tmp; ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); if (ret) return; - if (ctrl & NAND_CTRL_CHANGE) { - tmp = readl(nfc->regs + NFC_REG_CTL); - if (ctrl & NAND_NCE) - tmp |= NFC_CE_CTL; - else - tmp &= ~NFC_CE_CTL; - writel(tmp, nfc->regs + NFC_REG_CTL); - } + if (dat == NAND_CMD_NONE && (ctrl & NAND_NCE) && + !(ctrl & (NAND_CLE | NAND_ALE))) { + u32 cmd = 0; - if (dat == NAND_CMD_NONE) - return; + if (!sunxi_nand->addr_cycles && !sunxi_nand->cmd_cycles) + return; - if (ctrl & NAND_CLE) { - writel(NFC_SEND_CMD1 | dat, nfc->regs + NFC_REG_CMD); - } else { - writel(dat, nfc->regs + NFC_REG_ADDR_LOW); - writel(NFC_SEND_ADR, nfc->regs + NFC_REG_CMD); + if (sunxi_nand->cmd_cycles--) + cmd |= NFC_SEND_CMD1 | sunxi_nand->cmd[0]; + + if (sunxi_nand->cmd_cycles--) { + cmd |= NFC_SEND_CMD2; + writel(sunxi_nand->cmd[1], + nfc->regs + NFC_REG_RCMD_SET); + } + + sunxi_nand->cmd_cycles = 0; + + if (sunxi_nand->addr_cycles) { + cmd |= NFC_SEND_ADR | + NFC_ADR_NUM(sunxi_nand->addr_cycles); + writel(sunxi_nand->addr[0], + nfc->regs + NFC_REG_ADDR_LOW); + } + + if (sunxi_nand->addr_cycles > 4) + writel(sunxi_nand->addr[1], + nfc->regs + NFC_REG_ADDR_HIGH); + + writel(cmd, nfc->regs + NFC_REG_CMD); + sunxi_nand->addr[0] = 0; + sunxi_nand->addr[1] = 0; + sunxi_nand->addr_cycles = 0; + sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); } - sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + if (ctrl & NAND_CLE) { + sunxi_nand->cmd[sunxi_nand->cmd_cycles++] = dat; + } else if (ctrl & NAND_ALE) { + sunxi_nand->addr[sunxi_nand->addr_cycles / 4] |= + dat << ((sunxi_nand->addr_cycles % 4) * 8); + sunxi_nand->addr_cycles++; + } } /* These seed values have been extracted from Allwinner's BSP */ @@ -717,7 +749,8 @@ static void sunxi_nfc_hw_ecc_enable(struct mtd_info *mtd) ecc_ctl = readl(nfc->regs + NFC_REG_ECC_CTL); ecc_ctl &= ~(NFC_ECC_MODE_MSK | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE_MSK); - ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(data->mode) | NFC_ECC_EXCEPTION; + ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(data->mode) | NFC_ECC_EXCEPTION | + NFC_ECC_PIPELINE; writel(ecc_ctl, nfc->regs + NFC_REG_ECC_CTL); } @@ -739,18 +772,106 @@ static inline void sunxi_nfc_user_data_to_buf(u32 user_data, u8 *buf) buf[3] = user_data >> 24; } +static inline u32 sunxi_nfc_buf_to_user_data(const u8 *buf) +{ + return buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24); +} + +static void sunxi_nfc_hw_ecc_get_prot_oob_bytes(struct mtd_info *mtd, u8 *oob, + int step, bool bbm, int page) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller); + + sunxi_nfc_user_data_to_buf(readl(nfc->regs + NFC_REG_USER_DATA(step)), + oob); + + /* De-randomize the Bad Block Marker. */ + if (bbm && (nand->options & NAND_NEED_SCRAMBLING)) + sunxi_nfc_randomize_bbm(mtd, page, oob); +} + +static void sunxi_nfc_hw_ecc_set_prot_oob_bytes(struct mtd_info *mtd, + const u8 *oob, int step, + bool bbm, int page) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller); + u8 user_data[4]; + + /* Randomize the Bad Block Marker. */ + if (bbm && (nand->options & NAND_NEED_SCRAMBLING)) { + memcpy(user_data, oob, sizeof(user_data)); + sunxi_nfc_randomize_bbm(mtd, page, user_data); + oob = user_data; + } + + writel(sunxi_nfc_buf_to_user_data(oob), + nfc->regs + NFC_REG_USER_DATA(step)); +} + +static void sunxi_nfc_hw_ecc_update_stats(struct mtd_info *mtd, + unsigned int *max_bitflips, int ret) +{ + if (ret < 0) { + mtd->ecc_stats.failed++; + } else { + mtd->ecc_stats.corrected += ret; + *max_bitflips = max_t(unsigned int, *max_bitflips, ret); + } +} + +static int sunxi_nfc_hw_ecc_correct(struct mtd_info *mtd, u8 *data, u8 *oob, + int step, bool *erased) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller); + struct nand_ecc_ctrl *ecc = &nand->ecc; + u32 status, tmp; + + *erased = false; + + status = readl(nfc->regs + NFC_REG_ECC_ST); + + if (status & NFC_ECC_ERR(step)) + return -EBADMSG; + + if (status & NFC_ECC_PAT_FOUND(step)) { + u8 pattern; + + if (unlikely(!(readl(nfc->regs + NFC_REG_PAT_ID) & 0x1))) { + pattern = 0x0; + } else { + pattern = 0xff; + *erased = true; + } + + if (data) + memset(data, pattern, ecc->size); + + if (oob) + memset(oob, pattern, ecc->bytes + 4); + + return 0; + } + + tmp = readl(nfc->regs + NFC_REG_ECC_ERR_CNT(step)); + + return NFC_ECC_ERR_CNT(step, tmp); +} + static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd, u8 *data, int data_off, u8 *oob, int oob_off, int *cur_off, unsigned int *max_bitflips, - bool bbm, int page) + bool bbm, bool oob_required, int page) { struct nand_chip *nand = mtd_to_nand(mtd); struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller); struct nand_ecc_ctrl *ecc = &nand->ecc; int raw_mode = 0; - u32 status; + bool erased; int ret; if (*cur_off != data_off) @@ -769,34 +890,19 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd, writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ECC_OP, nfc->regs + NFC_REG_CMD); - ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); sunxi_nfc_randomizer_disable(mtd); if (ret) return ret; *cur_off = oob_off + ecc->bytes + 4; - status = readl(nfc->regs + NFC_REG_ECC_ST); - if (status & NFC_ECC_PAT_FOUND(0)) { - u8 pattern = 0xff; - - if (unlikely(!(readl(nfc->regs + NFC_REG_PAT_ID) & 0x1))) - pattern = 0x0; - - memset(data, pattern, ecc->size); - memset(oob, pattern, ecc->bytes + 4); - + ret = sunxi_nfc_hw_ecc_correct(mtd, data, oob_required ? oob : NULL, 0, + &erased); + if (erased) return 1; - } - - ret = NFC_ECC_ERR_CNT(0, readl(nfc->regs + NFC_REG_ECC_ERR_CNT(0))); - - memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE, ecc->size); - - nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1); - sunxi_nfc_randomizer_read_buf(mtd, oob, ecc->bytes + 4, true, page); - if (status & NFC_ECC_ERR(0)) { + if (ret < 0) { /* * Re-read the data with the randomizer disabled to identify * bitflips in erased pages. @@ -804,35 +910,34 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd, if (nand->options & NAND_NEED_SCRAMBLING) { nand->cmdfunc(mtd, NAND_CMD_RNDOUT, data_off, -1); nand->read_buf(mtd, data, ecc->size); - nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1); - nand->read_buf(mtd, oob, ecc->bytes + 4); + } else { + memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE, + ecc->size); } + nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1); + nand->read_buf(mtd, oob, ecc->bytes + 4); + ret = nand_check_erased_ecc_chunk(data, ecc->size, oob, ecc->bytes + 4, NULL, 0, ecc->strength); if (ret >= 0) raw_mode = 1; } else { - /* - * The engine protects 4 bytes of OOB data per chunk. - * Retrieve the corrected OOB bytes. - */ - sunxi_nfc_user_data_to_buf(readl(nfc->regs + NFC_REG_USER_DATA(0)), - oob); + memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE, ecc->size); - /* De-randomize the Bad Block Marker. */ - if (bbm && nand->options & NAND_NEED_SCRAMBLING) - sunxi_nfc_randomize_bbm(mtd, page, oob); - } + if (oob_required) { + nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1); + sunxi_nfc_randomizer_read_buf(mtd, oob, ecc->bytes + 4, + true, page); - if (ret < 0) { - mtd->ecc_stats.failed++; - } else { - mtd->ecc_stats.corrected += ret; - *max_bitflips = max_t(unsigned int, *max_bitflips, ret); + sunxi_nfc_hw_ecc_get_prot_oob_bytes(mtd, oob, 0, + bbm, page); + } } + sunxi_nfc_hw_ecc_update_stats(mtd, max_bitflips, ret); + return raw_mode; } @@ -848,7 +953,7 @@ static void sunxi_nfc_hw_ecc_read_extra_oob(struct mtd_info *mtd, if (len <= 0) return; - if (*cur_off != offset) + if (!cur_off || *cur_off != offset) nand->cmdfunc(mtd, NAND_CMD_RNDOUT, offset + mtd->writesize, -1); @@ -858,12 +963,8 @@ static void sunxi_nfc_hw_ecc_read_extra_oob(struct mtd_info *mtd, sunxi_nfc_randomizer_read_buf(mtd, oob + offset, len, false, page); - *cur_off = mtd->oobsize + mtd->writesize; -} - -static inline u32 sunxi_nfc_buf_to_user_data(const u8 *buf) -{ - return buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24); + if (cur_off) + *cur_off = mtd->oobsize + mtd->writesize; } static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd, @@ -882,19 +983,6 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd, sunxi_nfc_randomizer_write_buf(mtd, data, ecc->size, false, page); - /* Fill OOB data in */ - if ((nand->options & NAND_NEED_SCRAMBLING) && bbm) { - u8 user_data[4]; - - memcpy(user_data, oob, 4); - sunxi_nfc_randomize_bbm(mtd, page, user_data); - writel(sunxi_nfc_buf_to_user_data(user_data), - nfc->regs + NFC_REG_USER_DATA(0)); - } else { - writel(sunxi_nfc_buf_to_user_data(oob), - nfc->regs + NFC_REG_USER_DATA(0)); - } - if (data_off + ecc->size != oob_off) nand->cmdfunc(mtd, NAND_CMD_RNDIN, oob_off, -1); @@ -903,11 +991,13 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd, return ret; sunxi_nfc_randomizer_enable(mtd); + sunxi_nfc_hw_ecc_set_prot_oob_bytes(mtd, oob, 0, bbm, page); + writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR | NFC_ECC_OP, nfc->regs + NFC_REG_CMD); - ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); sunxi_nfc_randomizer_disable(mtd); if (ret) return ret; @@ -929,13 +1019,14 @@ static void sunxi_nfc_hw_ecc_write_extra_oob(struct mtd_info *mtd, if (len <= 0) return; - if (*cur_off != offset) + if (!cur_off || *cur_off != offset) nand->cmdfunc(mtd, NAND_CMD_RNDIN, offset + mtd->writesize, -1); sunxi_nfc_randomizer_write_buf(mtd, oob + offset, len, false, page); - *cur_off = mtd->oobsize + mtd->writesize; + if (cur_off) + *cur_off = mtd->oobsize + mtd->writesize; } static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, @@ -958,7 +1049,7 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, oob, oob_off + mtd->writesize, &cur_off, &max_bitflips, - !i, page); + !i, oob_required, page); if (ret < 0) return ret; else if (ret) @@ -974,6 +1065,39 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, return max_bitflips; } +static int sunxi_nfc_hw_ecc_read_subpage(struct mtd_info *mtd, + struct nand_chip *chip, + u32 data_offs, u32 readlen, + u8 *bufpoi, int page) +{ + struct nand_ecc_ctrl *ecc = &chip->ecc; + int ret, i, cur_off = 0; + unsigned int max_bitflips = 0; + + sunxi_nfc_hw_ecc_enable(mtd); + + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + for (i = data_offs / ecc->size; + i < DIV_ROUND_UP(data_offs + readlen, ecc->size); i++) { + int data_off = i * ecc->size; + int oob_off = i * (ecc->bytes + 4); + u8 *data = bufpoi + data_off; + u8 *oob = chip->oob_poi + oob_off; + + ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, + oob, + oob_off + mtd->writesize, + &cur_off, &max_bitflips, !i, + false, page); + if (ret < 0) + return ret; + } + + sunxi_nfc_hw_ecc_disable(mtd); + + return max_bitflips; +} + static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required, @@ -1026,7 +1150,9 @@ static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd, ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, oob, oob_off, &cur_off, - &max_bitflips, !i, page); + &max_bitflips, !i, + oob_required, + page); if (ret < 0) return ret; else if (ret) @@ -1074,6 +1200,40 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, return 0; } +static int sunxi_nfc_hw_common_ecc_read_oob(struct mtd_info *mtd, + struct nand_chip *chip, + int page) +{ + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + chip->pagebuf = -1; + + return chip->ecc.read_page(mtd, chip, chip->buffers->databuf, 1, page); +} + +static int sunxi_nfc_hw_common_ecc_write_oob(struct mtd_info *mtd, + struct nand_chip *chip, + int page) +{ + int ret, status; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0, page); + + chip->pagebuf = -1; + + memset(chip->buffers->databuf, 0xff, mtd->writesize); + ret = chip->ecc.write_page(mtd, chip, chip->buffers->databuf, 1, page); + if (ret) + return ret; + + /* Send command to program the OOB data */ + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + + status = chip->waitfunc(mtd, chip); + + return status & NAND_STATUS_FAIL ? -EIO : 0; +} + static const s32 tWB_lut[] = {6, 12, 16, 20}; static const s32 tRHW_lut[] = {4, 8, 12, 20}; @@ -1101,6 +1261,7 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, struct sunxi_nfc *nfc = to_sunxi_nfc(chip->nand.controller); u32 min_clk_period = 0; s32 tWB, tADL, tWHR, tRHW, tCAD; + long real_clk_rate; /* T1 <=> tCLS */ if (timings->tCLS_min > min_clk_period) @@ -1163,6 +1324,18 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, min_clk_period = DIV_ROUND_UP(timings->tWC_min, 2); /* T16 - T19 + tCAD */ + if (timings->tWB_max > (min_clk_period * 20)) + min_clk_period = DIV_ROUND_UP(timings->tWB_max, 20); + + if (timings->tADL_min > (min_clk_period * 32)) + min_clk_period = DIV_ROUND_UP(timings->tADL_min, 32); + + if (timings->tWHR_min > (min_clk_period * 32)) + min_clk_period = DIV_ROUND_UP(timings->tWHR_min, 32); + + if (timings->tRHW_min > (min_clk_period * 20)) + min_clk_period = DIV_ROUND_UP(timings->tRHW_min, 20); + tWB = sunxi_nand_lookup_timing(tWB_lut, timings->tWB_max, min_clk_period); if (tWB < 0) { @@ -1198,23 +1371,26 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, /* TODO: A83 has some more bits for CDQSS, CS, CLHZ, CCS, WC */ chip->timing_cfg = NFC_TIMING_CFG(tWB, tADL, tWHR, tRHW, tCAD); - /* - * ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data - * output cycle timings shall be used if the host drives tRC less than - * 30 ns. - */ - chip->timing_ctl = (timings->tRC_min < 30000) ? NFC_TIMING_CTL_EDO : 0; - /* Convert min_clk_period from picoseconds to nanoseconds */ min_clk_period = DIV_ROUND_UP(min_clk_period, 1000); /* - * Convert min_clk_period into a clk frequency, then get the - * appropriate rate for the NAND controller IP given this formula - * (specified in the datasheet): - * nand clk_rate = 2 * min_clk_rate + * Unlike what is stated in Allwinner datasheet, the clk_rate should + * be set to (1 / min_clk_period), and not (2 / min_clk_period). + * This new formula was verified with a scope and validated by + * Allwinner engineers. */ - chip->clk_rate = (2 * NSEC_PER_SEC) / min_clk_period; + chip->clk_rate = NSEC_PER_SEC / min_clk_period; + real_clk_rate = clk_round_rate(nfc->mod_clk, chip->clk_rate); + + /* + * ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data + * output cycle timings shall be used if the host drives tRC less than + * 30 ns. + */ + min_clk_period = NSEC_PER_SEC / real_clk_rate; + chip->timing_ctl = ((min_clk_period * 2) < 30) ? + NFC_TIMING_CTL_EDO : 0; return 0; } @@ -1257,6 +1433,57 @@ static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip, return sunxi_nand_chip_set_timings(chip, timings); } +static int sunxi_nand_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &nand->ecc; + + if (section >= ecc->steps) + return -ERANGE; + + oobregion->offset = section * (ecc->bytes + 4) + 4; + oobregion->length = ecc->bytes; + + return 0; +} + +static int sunxi_nand_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &nand->ecc; + + if (section > ecc->steps) + return -ERANGE; + + /* + * The first 2 bytes are used for BB markers, hence we + * only have 2 bytes available in the first user data + * section. + */ + if (!section && ecc->mode == NAND_ECC_HW) { + oobregion->offset = 2; + oobregion->length = 2; + + return 0; + } + + oobregion->offset = section * (ecc->bytes + 4); + + if (section < ecc->steps) + oobregion->length = 4; + else + oobregion->offset = mtd->oobsize - oobregion->offset; + + return 0; +} + +static const struct mtd_ooblayout_ops sunxi_nand_ooblayout_ops = { + .ecc = sunxi_nand_ooblayout_ecc, + .free = sunxi_nand_ooblayout_free, +}; + static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc, struct device_node *np) @@ -1266,7 +1493,6 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd, struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); struct sunxi_nand_hw_ecc *data; - struct nand_ecclayout *layout; int nsectors; int ret; int i; @@ -1295,7 +1521,6 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd, /* HW ECC always work with even numbers of ECC bytes */ ecc->bytes = ALIGN(ecc->bytes, 2); - layout = &data->layout; nsectors = mtd->writesize / ecc->size; if (mtd->oobsize < ((ecc->bytes + 4) * nsectors)) { @@ -1303,9 +1528,9 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd, goto err; } - layout->eccbytes = (ecc->bytes * nsectors); - - ecc->layout = layout; + ecc->read_oob = sunxi_nfc_hw_common_ecc_read_oob; + ecc->write_oob = sunxi_nfc_hw_common_ecc_write_oob; + mtd_set_ooblayout(mtd, &sunxi_nand_ooblayout_ops); ecc->priv = data; return 0; @@ -1325,9 +1550,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc, struct device_node *np) { - struct nand_ecclayout *layout; - int nsectors; - int i, j; int ret; ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np); @@ -1336,40 +1558,9 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd, ecc->read_page = sunxi_nfc_hw_ecc_read_page; ecc->write_page = sunxi_nfc_hw_ecc_write_page; - layout = ecc->layout; - nsectors = mtd->writesize / ecc->size; - - for (i = 0; i < nsectors; i++) { - if (i) { - layout->oobfree[i].offset = - layout->oobfree[i - 1].offset + - layout->oobfree[i - 1].length + - ecc->bytes; - layout->oobfree[i].length = 4; - } else { - /* - * The first 2 bytes are used for BB markers, hence we - * only have 2 bytes available in the first user data - * section. - */ - layout->oobfree[i].length = 2; - layout->oobfree[i].offset = 2; - } - - for (j = 0; j < ecc->bytes; j++) - layout->eccpos[(ecc->bytes * i) + j] = - layout->oobfree[i].offset + - layout->oobfree[i].length + j; - } - - if (mtd->oobsize > (ecc->bytes + 4) * nsectors) { - layout->oobfree[nsectors].offset = - layout->oobfree[nsectors - 1].offset + - layout->oobfree[nsectors - 1].length + - ecc->bytes; - layout->oobfree[nsectors].length = mtd->oobsize - - ((ecc->bytes + 4) * nsectors); - } + ecc->read_oob_raw = nand_read_oob_std; + ecc->write_oob_raw = nand_write_oob_std; + ecc->read_subpage = sunxi_nfc_hw_ecc_read_subpage; return 0; } @@ -1378,9 +1569,6 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc, struct device_node *np) { - struct nand_ecclayout *layout; - int nsectors; - int i; int ret; ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np); @@ -1390,15 +1578,8 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd, ecc->prepad = 4; ecc->read_page = sunxi_nfc_hw_syndrome_ecc_read_page; ecc->write_page = sunxi_nfc_hw_syndrome_ecc_write_page; - - layout = ecc->layout; - nsectors = mtd->writesize / ecc->size; - - for (i = 0; i < (ecc->bytes * nsectors); i++) - layout->eccpos[i] = i; - - layout->oobfree[0].length = mtd->oobsize - i; - layout->oobfree[0].offset = i; + ecc->read_oob_raw = nand_read_oob_syndrome; + ecc->write_oob_raw = nand_write_oob_syndrome; return 0; } @@ -1411,7 +1592,6 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc) sunxi_nand_hw_common_ecc_ctrl_cleanup(ecc); break; case NAND_ECC_NONE: - kfree(ecc->layout); default: break; } @@ -1432,8 +1612,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc, return -EINVAL; switch (ecc->mode) { - case NAND_ECC_SOFT_BCH: - break; case NAND_ECC_HW: ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np); if (ret) @@ -1445,10 +1623,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc, return ret; break; case NAND_ECC_NONE: - ecc->layout = kzalloc(sizeof(*ecc->layout), GFP_KERNEL); - if (!ecc->layout) - return -ENOMEM; - ecc->layout->oobfree[0].length = mtd->oobsize; case NAND_ECC_SOFT: break; default: @@ -1536,21 +1710,6 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, } } - timings = onfi_async_timing_mode_to_sdr_timings(0); - if (IS_ERR(timings)) { - ret = PTR_ERR(timings); - dev_err(dev, - "could not retrieve timings for ONFI mode 0: %d\n", - ret); - return ret; - } - - ret = sunxi_nand_chip_set_timings(chip, timings); - if (ret) { - dev_err(dev, "could not configure chip timings: %d\n", ret); - return ret; - } - nand = &chip->nand; /* Default tR value specified in the ONFI spec (chapter 4.15.1) */ nand->chip_delay = 200; @@ -1570,6 +1729,21 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, mtd = nand_to_mtd(nand); mtd->dev.parent = dev; + timings = onfi_async_timing_mode_to_sdr_timings(0); + if (IS_ERR(timings)) { + ret = PTR_ERR(timings); + dev_err(dev, + "could not retrieve timings for ONFI mode 0: %d\n", + ret); + return ret; + } + + ret = sunxi_nand_chip_set_timings(chip, timings); + if (ret) { + dev_err(dev, "could not configure chip timings: %d\n", ret); + return ret; + } + ret = nand_scan_ident(mtd, nsels, NULL); if (ret) return ret; @@ -1580,6 +1754,8 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, if (nand->options & NAND_NEED_SCRAMBLING) nand->options |= NAND_NO_SUBPAGE_WRITE; + nand->options |= NAND_SUBPAGE_READ; + ret = sunxi_nand_chip_init_timings(chip, np); if (ret) { dev_err(dev, "could not configure chip timings: %d\n", ret); @@ -1728,6 +1904,8 @@ static int sunxi_nfc_remove(struct platform_device *pdev) struct sunxi_nfc *nfc = platform_get_drvdata(pdev); sunxi_nand_chips_cleanup(nfc); + clk_disable_unprepare(nfc->mod_clk); + clk_disable_unprepare(nfc->ahb_clk); return 0; } diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c index 293feb19b0b1..3ad514c44dcb 100644 --- a/drivers/mtd/nand/vf610_nfc.c +++ b/drivers/mtd/nand/vf610_nfc.c @@ -33,7 +33,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> -#include <linux/of_mtd.h> #include <linux/of_device.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> @@ -175,34 +174,6 @@ static inline struct vf610_nfc *mtd_to_nfc(struct mtd_info *mtd) return container_of(mtd_to_nand(mtd), struct vf610_nfc, chip); } -static struct nand_ecclayout vf610_nfc_ecc45 = { - .eccbytes = 45, - .eccpos = {19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63}, - .oobfree = { - {.offset = 2, - .length = 17} } -}; - -static struct nand_ecclayout vf610_nfc_ecc60 = { - .eccbytes = 60, - .eccpos = { 4, 5, 6, 7, 8, 9, 10, 11, - 12, 13, 14, 15, 16, 17, 18, 19, - 20, 21, 22, 23, 24, 25, 26, 27, - 28, 29, 30, 31, 32, 33, 34, 35, - 36, 37, 38, 39, 40, 41, 42, 43, - 44, 45, 46, 47, 48, 49, 50, 51, - 52, 53, 54, 55, 56, 57, 58, 59, - 60, 61, 62, 63 }, - .oobfree = { - {.offset = 2, - .length = 2} } -}; - static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg) { return readl(nfc->regs + reg); @@ -781,14 +752,16 @@ static int vf610_nfc_probe(struct platform_device *pdev) if (mtd->oobsize > 64) mtd->oobsize = 64; + /* + * mtd->ecclayout is not specified here because we're using the + * default large page ECC layout defined in NAND core. + */ if (chip->ecc.strength == 32) { nfc->ecc_mode = ECC_60_BYTE; chip->ecc.bytes = 60; - chip->ecc.layout = &vf610_nfc_ecc60; } else if (chip->ecc.strength == 24) { nfc->ecc_mode = ECC_45_BYTE; chip->ecc.bytes = 45; - chip->ecc.layout = &vf610_nfc_ecc45; } else { dev_err(nfc->dev, "Unsupported ECC strength\n"); err = -ENXIO; diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index af28bb3ae7cf..a4b029a417f0 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -68,21 +68,33 @@ MODULE_PARM_DESC(otp, "Corresponding behaviour of OneNAND in OTP" * flexonenand_oob_128 - oob info for Flex-Onenand with 4KB page * For now, we expose only 64 out of 80 ecc bytes */ -static struct nand_ecclayout flexonenand_oob_128 = { - .eccbytes = 64, - .eccpos = { - 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, - 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, - 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, - 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, - 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, - 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, - 102, 103, 104, 105 - }, - .oobfree = { - {2, 4}, {18, 4}, {34, 4}, {50, 4}, - {66, 4}, {82, 4}, {98, 4}, {114, 4} - } +static int flexonenand_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = (section * 16) + 6; + oobregion->length = 10; + + return 0; +} + +static int flexonenand_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = (section * 16) + 2; + oobregion->length = 4; + + return 0; +} + +static const struct mtd_ooblayout_ops flexonenand_ooblayout_ops = { + .ecc = flexonenand_ooblayout_ecc, + .free = flexonenand_ooblayout_free, }; /* @@ -91,56 +103,77 @@ static struct nand_ecclayout flexonenand_oob_128 = { * Based on specification: * 4Gb M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010 * - * For eccpos we expose only 64 bytes out of 72 (see struct nand_ecclayout) - * - * oobfree uses the spare area fields marked as - * "Managed by internal ECC logic for Logical Sector Number area" */ -static struct nand_ecclayout onenand_oob_128 = { - .eccbytes = 64, - .eccpos = { - 7, 8, 9, 10, 11, 12, 13, 14, 15, - 23, 24, 25, 26, 27, 28, 29, 30, 31, - 39, 40, 41, 42, 43, 44, 45, 46, 47, - 55, 56, 57, 58, 59, 60, 61, 62, 63, - 71, 72, 73, 74, 75, 76, 77, 78, 79, - 87, 88, 89, 90, 91, 92, 93, 94, 95, - 103, 104, 105, 106, 107, 108, 109, 110, 111, - 119 - }, - .oobfree = { - {2, 3}, {18, 3}, {34, 3}, {50, 3}, - {66, 3}, {82, 3}, {98, 3}, {114, 3} - } +static int onenand_ooblayout_128_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = (section * 16) + 7; + oobregion->length = 9; + + return 0; +} + +static int onenand_ooblayout_128_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section >= 8) + return -ERANGE; + + /* + * free bytes are using the spare area fields marked as + * "Managed by internal ECC logic for Logical Sector Number area" + */ + oobregion->offset = (section * 16) + 2; + oobregion->length = 3; + + return 0; +} + +static const struct mtd_ooblayout_ops onenand_oob_128_ooblayout_ops = { + .ecc = onenand_ooblayout_128_ecc, + .free = onenand_ooblayout_128_free, }; /** - * onenand_oob_64 - oob info for large (2KB) page + * onenand_oob_32_64 - oob info for large (2KB) page */ -static struct nand_ecclayout onenand_oob_64 = { - .eccbytes = 20, - .eccpos = { - 8, 9, 10, 11, 12, - 24, 25, 26, 27, 28, - 40, 41, 42, 43, 44, - 56, 57, 58, 59, 60, - }, - .oobfree = { - {2, 3}, {14, 2}, {18, 3}, {30, 2}, - {34, 3}, {46, 2}, {50, 3}, {62, 2} +static int onenand_ooblayout_32_64_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 3) + return -ERANGE; + + oobregion->offset = (section * 16) + 8; + oobregion->length = 5; + + return 0; +} + +static int onenand_ooblayout_32_64_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + int sections = (mtd->oobsize / 32) * 2; + + if (section >= sections) + return -ERANGE; + + if (section & 1) { + oobregion->offset = ((section - 1) * 16) + 14; + oobregion->length = 2; + } else { + oobregion->offset = (section * 16) + 2; + oobregion->length = 3; } -}; -/** - * onenand_oob_32 - oob info for middle (1KB) page - */ -static struct nand_ecclayout onenand_oob_32 = { - .eccbytes = 10, - .eccpos = { - 8, 9, 10, 11, 12, - 24, 25, 26, 27, 28, - }, - .oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} } + return 0; +} + +static const struct mtd_ooblayout_ops onenand_oob_32_64_ooblayout_ops = { + .ecc = onenand_ooblayout_32_64_ecc, + .free = onenand_ooblayout_32_64_free, }; static const unsigned char ffchars[] = { @@ -1024,34 +1057,15 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col int thislen) { struct onenand_chip *this = mtd->priv; - struct nand_oobfree *free; - int readcol = column; - int readend = column + thislen; - int lastgap = 0; - unsigned int i; - uint8_t *oob_buf = this->oob_buf; - - free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { - if (readcol >= lastgap) - readcol += free->offset - lastgap; - if (readend >= lastgap) - readend += free->offset - lastgap; - lastgap = free->offset + free->length; - } - this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize); - free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { - int free_end = free->offset + free->length; - if (free->offset < readend && free_end > readcol) { - int st = max_t(int,free->offset,readcol); - int ed = min_t(int,free_end,readend); - int n = ed - st; - memcpy(buf, oob_buf + st, n); - buf += n; - } else if (column == 0) - break; - } + int ret; + + this->read_bufferram(mtd, ONENAND_SPARERAM, this->oob_buf, 0, + mtd->oobsize); + ret = mtd_ooblayout_get_databytes(mtd, buf, this->oob_buf, + column, thislen); + if (ret) + return ret; + return 0; } @@ -1808,34 +1822,7 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len, static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf, const u_char *buf, int column, int thislen) { - struct onenand_chip *this = mtd->priv; - struct nand_oobfree *free; - int writecol = column; - int writeend = column + thislen; - int lastgap = 0; - unsigned int i; - - free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { - if (writecol >= lastgap) - writecol += free->offset - lastgap; - if (writeend >= lastgap) - writeend += free->offset - lastgap; - lastgap = free->offset + free->length; - } - free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { - int free_end = free->offset + free->length; - if (free->offset < writeend && free_end > writecol) { - int st = max_t(int,free->offset,writecol); - int ed = min_t(int,free_end,writeend); - int n = ed - st; - memcpy(oob_buf + st, buf, n); - buf += n; - } else if (column == 0) - break; - } - return 0; + return mtd_ooblayout_set_databytes(mtd, buf, oob_buf, column, thislen); } /** @@ -4003,22 +3990,22 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) switch (mtd->oobsize) { case 128: if (FLEXONENAND(this)) { - this->ecclayout = &flexonenand_oob_128; + mtd_set_ooblayout(mtd, &flexonenand_ooblayout_ops); mtd->subpage_sft = 0; } else { - this->ecclayout = &onenand_oob_128; + mtd_set_ooblayout(mtd, &onenand_oob_128_ooblayout_ops); mtd->subpage_sft = 2; } if (ONENAND_IS_NOP_1(this)) mtd->subpage_sft = 0; break; case 64: - this->ecclayout = &onenand_oob_64; + mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops); mtd->subpage_sft = 2; break; case 32: - this->ecclayout = &onenand_oob_32; + mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops); mtd->subpage_sft = 1; break; @@ -4027,7 +4014,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) __func__, mtd->oobsize); mtd->subpage_sft = 0; /* To prevent kernel oops */ - this->ecclayout = &onenand_oob_32; + mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops); break; } @@ -4037,12 +4024,12 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) * The number of bytes available for a client to place data into * the out of band area */ - mtd->oobavail = 0; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && - this->ecclayout->oobfree[i].length; i++) - mtd->oobavail += this->ecclayout->oobfree[i].length; + ret = mtd_ooblayout_count_freebytes(mtd); + if (ret < 0) + ret = 0; + + mtd->oobavail = ret; - mtd->ecclayout = this->ecclayout; mtd->ecc_strength = 1; /* Fill in remaining MTD driver data */ |