diff options
Diffstat (limited to 'drivers/net/can/flexcan.c')
-rw-r--r-- | drivers/net/can/flexcan.c | 90 |
1 files changed, 38 insertions, 52 deletions
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index c83f0f03482b..e9e8f095461c 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -63,10 +63,10 @@ #define FLEXCAN_MCR_LPRIO_EN BIT(13) #define FLEXCAN_MCR_AEN BIT(12) #define FLEXCAN_MCR_MAXMB(x) ((x) & 0x7f) -#define FLEXCAN_MCR_IDAM_A (0 << 8) -#define FLEXCAN_MCR_IDAM_B (1 << 8) -#define FLEXCAN_MCR_IDAM_C (2 << 8) -#define FLEXCAN_MCR_IDAM_D (3 << 8) +#define FLEXCAN_MCR_IDAM_A (0x0 << 8) +#define FLEXCAN_MCR_IDAM_B (0x1 << 8) +#define FLEXCAN_MCR_IDAM_C (0x2 << 8) +#define FLEXCAN_MCR_IDAM_D (0x3 << 8) /* FLEXCAN control register (CANCTRL) bits */ #define FLEXCAN_CTRL_PRESDIV(x) (((x) & 0xff) << 24) @@ -161,7 +161,7 @@ #define FLEXCAN_MB_CODE_RX_INACTIVE (0x0 << 24) #define FLEXCAN_MB_CODE_RX_EMPTY (0x4 << 24) #define FLEXCAN_MB_CODE_RX_FULL (0x2 << 24) -#define FLEXCAN_MB_CODE_RX_OVERRRUN (0x6 << 24) +#define FLEXCAN_MB_CODE_RX_OVERRUN (0x6 << 24) #define FLEXCAN_MB_CODE_RX_RANSWER (0xa << 24) #define FLEXCAN_MB_CODE_TX_INACTIVE (0x8 << 24) @@ -175,12 +175,9 @@ #define FLEXCAN_MB_CNT_LENGTH(x) (((x) & 0xf) << 16) #define FLEXCAN_MB_CNT_TIMESTAMP(x) ((x) & 0xffff) -#define FLEXCAN_MB_CODE_MASK (0xf0ffffff) +#define FLEXCAN_TIMEOUT_US (50) -#define FLEXCAN_TIMEOUT_US (50) - -/* - * FLEXCAN hardware feature flags +/* FLEXCAN hardware feature flags * * Below is some version info we got: * SOC Version IP-Version Glitch- [TR]WRN_INT Memory err RTR re- @@ -236,7 +233,7 @@ struct flexcan_regs { * 0x0e0...0x0ff 6-7 8 entry ID table * (mx25, mx28, mx35, mx53) * 0x0e0...0x2df 6-7..37 8..128 entry ID table - * size conf'ed via ctrl2::RFFN + * size conf'ed via ctrl2::RFFN * (mx6, vf610) */ u32 _reserved4[408]; @@ -272,10 +269,13 @@ struct flexcan_priv { static struct flexcan_devtype_data fsl_p1010_devtype_data = { .features = FLEXCAN_HAS_BROKEN_ERR_STATE, }; + static struct flexcan_devtype_data fsl_imx28_devtype_data; + static struct flexcan_devtype_data fsl_imx6q_devtype_data = { .features = FLEXCAN_HAS_V10_FEATURES, }; + static struct flexcan_devtype_data fsl_vf610_devtype_data = { .features = FLEXCAN_HAS_V10_FEATURES | FLEXCAN_HAS_MECR_FEATURES, }; @@ -292,11 +292,10 @@ static const struct can_bittiming_const flexcan_bittiming_const = { .brp_inc = 1, }; -/* - * Abstract off the read/write for arm versus ppc. This +/* Abstract off the read/write for arm versus ppc. This * assumes that PPC uses big-endian registers and everything * else uses little-endian registers, independent of CPU - * endianess. + * endianness. */ #if defined(CONFIG_PPC) static inline u32 flexcan_read(void __iomem *addr) @@ -434,7 +433,6 @@ static int flexcan_chip_softreset(struct flexcan_priv *priv) return 0; } - static int __flexcan_get_berr_counter(const struct net_device *dev, struct can_berr_counter *bec) { @@ -477,6 +475,7 @@ static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev) struct flexcan_regs __iomem *regs = priv->base; struct can_frame *cf = (struct can_frame *)skb->data; u32 can_id; + u32 data; u32 ctrl = FLEXCAN_MB_CODE_TX_DATA | (cf->can_dlc << 16); if (can_dropped_invalid_skb(dev, skb)) @@ -495,11 +494,11 @@ static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev) ctrl |= FLEXCAN_MB_CNT_RTR; if (cf->can_dlc > 0) { - u32 data = be32_to_cpup((__be32 *)&cf->data[0]); + data = be32_to_cpup((__be32 *)&cf->data[0]); flexcan_write(data, ®s->cantxfg[FLEXCAN_TX_BUF_ID].data[0]); } if (cf->can_dlc > 3) { - u32 data = be32_to_cpup((__be32 *)&cf->data[4]); + data = be32_to_cpup((__be32 *)&cf->data[4]); flexcan_write(data, ®s->cantxfg[FLEXCAN_TX_BUF_ID].data[1]); } @@ -597,14 +596,14 @@ static int flexcan_poll_state(struct net_device *dev, u32 reg_esr) flt = reg_esr & FLEXCAN_ESR_FLT_CONF_MASK; if (likely(flt == FLEXCAN_ESR_FLT_CONF_ACTIVE)) { tx_state = unlikely(reg_esr & FLEXCAN_ESR_TX_WRN) ? - CAN_STATE_ERROR_WARNING : CAN_STATE_ERROR_ACTIVE; + CAN_STATE_ERROR_WARNING : CAN_STATE_ERROR_ACTIVE; rx_state = unlikely(reg_esr & FLEXCAN_ESR_RX_WRN) ? - CAN_STATE_ERROR_WARNING : CAN_STATE_ERROR_ACTIVE; + CAN_STATE_ERROR_WARNING : CAN_STATE_ERROR_ACTIVE; new_state = max(tx_state, rx_state); } else { __flexcan_get_berr_counter(dev, &bec); new_state = flt == FLEXCAN_ESR_FLT_CONF_PASSIVE ? - CAN_STATE_ERROR_PASSIVE : CAN_STATE_BUS_OFF; + CAN_STATE_ERROR_PASSIVE : CAN_STATE_BUS_OFF; rx_state = bec.rxerr >= bec.txerr ? new_state : 0; tx_state = bec.rxerr <= bec.txerr ? new_state : 0; } @@ -687,8 +686,7 @@ static int flexcan_poll(struct napi_struct *napi, int quota) u32 reg_iflag1, reg_esr; int work_done = 0; - /* - * The error bits are cleared on read, + /* The error bits are cleared on read, * use saved value from irq handler. */ reg_esr = flexcan_read(®s->esr) | priv->reg_esr; @@ -728,12 +726,12 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) reg_iflag1 = flexcan_read(®s->iflag1); reg_esr = flexcan_read(®s->esr); + /* ACK all bus error and state change IRQ sources */ if (reg_esr & FLEXCAN_ESR_ALL_INT) flexcan_write(reg_esr & FLEXCAN_ESR_ALL_INT, ®s->esr); - /* - * schedule NAPI in case of: + /* schedule NAPI in case of: * - rx IRQ * - state change IRQ * - bus error IRQ and bus error reporting is activated @@ -741,15 +739,14 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) if ((reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE) || (reg_esr & FLEXCAN_ESR_ERR_STATE) || flexcan_has_and_handle_berr(priv, reg_esr)) { - /* - * The error bits are cleared on read, + /* The error bits are cleared on read, * save them for later use. */ priv->reg_esr = reg_esr & FLEXCAN_ESR_ERR_BUS; flexcan_write(FLEXCAN_IFLAG_DEFAULT & - ~FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->imask1); + ~FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->imask1); flexcan_write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL, - ®s->ctrl); + ®s->ctrl); napi_schedule(&priv->napi); } @@ -765,7 +762,8 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) stats->tx_bytes += can_get_echo_skb(dev, 0); stats->tx_packets++; can_led_event(dev, CAN_LED_EVENT_TX); - /* after sending a RTR frame mailbox is in RX mode */ + + /* after sending a RTR frame MB is in RX mode */ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE, ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl); flexcan_write((1 << FLEXCAN_TX_BUF_ID), ®s->iflag1); @@ -813,8 +811,7 @@ static void flexcan_set_bittiming(struct net_device *dev) flexcan_read(®s->mcr), flexcan_read(®s->ctrl)); } -/* - * flexcan_chip_start +/* flexcan_chip_start * * this functions is entered with clocks enabled * @@ -838,8 +835,7 @@ static int flexcan_chip_start(struct net_device *dev) flexcan_set_bittiming(dev); - /* - * MCR + /* MCR * * enable freeze * enable fifo @@ -848,7 +844,6 @@ static int flexcan_chip_start(struct net_device *dev) * enable warning int * choose format C * disable local echo - * */ reg_mcr = flexcan_read(®s->mcr); reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff); @@ -859,8 +854,7 @@ static int flexcan_chip_start(struct net_device *dev) netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr); flexcan_write(reg_mcr, ®s->mcr); - /* - * CTRL + /* CTRL * * disable timer sync feature * @@ -875,8 +869,8 @@ static int flexcan_chip_start(struct net_device *dev) reg_ctrl &= ~FLEXCAN_CTRL_TSYN; reg_ctrl |= FLEXCAN_CTRL_BOFF_REC | FLEXCAN_CTRL_LBUF | FLEXCAN_CTRL_ERR_STATE; - /* - * enable the "error interrupt" (FLEXCAN_CTRL_ERR_MSK), + + /* enable the "error interrupt" (FLEXCAN_CTRL_ERR_MSK), * on most Flexcan cores, too. Otherwise we don't get * any error warning or passive interrupts. */ @@ -913,16 +907,14 @@ static int flexcan_chip_start(struct net_device *dev) if (priv->devtype_data->features & FLEXCAN_HAS_V10_FEATURES) flexcan_write(0x0, ®s->rxfgmask); - /* - * On Vybrid, disable memory error detection interrupts + /* On Vybrid, disable memory error detection interrupts * and freeze mode. * This also works around errata e5295 which generates * false positive memory errors and put the device in * freeze mode. */ if (priv->devtype_data->features & FLEXCAN_HAS_MECR_FEATURES) { - /* - * Follow the protocol as described in "Detection + /* Follow the protocol as described in "Detection * and Correction of Memory Errors" to write to * MECR register */ @@ -934,7 +926,7 @@ static int flexcan_chip_start(struct net_device *dev) reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS; flexcan_write(reg_mecr, ®s->mecr); reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK | - FLEXCAN_MECR_FANCEI_MSK); + FLEXCAN_MECR_FANCEI_MSK); flexcan_write(reg_mecr, ®s->mecr); } @@ -965,11 +957,9 @@ static int flexcan_chip_start(struct net_device *dev) return err; } -/* - * flexcan_chip_stop +/* flexcan_chip_stop * * this functions is entered with clocks enabled - * */ static void flexcan_chip_stop(struct net_device *dev) { @@ -987,8 +977,6 @@ static void flexcan_chip_stop(struct net_device *dev) flexcan_transceiver_disable(priv); priv->can.state = CAN_STATE_STOPPED; - - return; } static int flexcan_open(struct net_device *dev) @@ -1114,8 +1102,7 @@ static int register_flexcandev(struct net_device *dev) FLEXCAN_MCR_FEN | FLEXCAN_MCR_SUPV; flexcan_write(reg, ®s->mcr); - /* - * Currently we only support newer versions of this core + /* Currently we only support newer versions of this core * featuring a RX FIFO. Older cores found on some Coldfire * derivates are not yet supported. */ @@ -1180,7 +1167,7 @@ static int flexcan_probe(struct platform_device *pdev) if (pdev->dev.of_node) of_property_read_u32(pdev->dev.of_node, - "clock-frequency", &clock_freq); + "clock-frequency", &clock_freq); if (!clock_freq) { clk_ipg = devm_clk_get(&pdev->dev, "ipg"); @@ -1237,7 +1224,6 @@ static int flexcan_probe(struct platform_device *pdev) priv->clk_per = clk_per; priv->pdata = dev_get_platdata(&pdev->dev); priv->devtype_data = devtype_data; - priv->reg_xceiver = reg_xceiver; netif_napi_add(dev, &priv->napi, flexcan_poll, FLEXCAN_NAPI_WEIGHT); |