diff options
Diffstat (limited to 'drivers/net/ethernet/xilinx/xilinx_axienet.h')
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet.h | 144 |
1 files changed, 115 insertions, 29 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 807ead678551..d64b8abcf018 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -29,26 +29,26 @@ /* Configuration options */ /* Accept all incoming packets. Default: disabled (cleared) */ -#define XAE_OPTION_PROMISC (1 << 0) +#define XAE_OPTION_PROMISC BIT(0) /* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */ -#define XAE_OPTION_JUMBO (1 << 1) +#define XAE_OPTION_JUMBO BIT(1) /* VLAN Rx & Tx frame support. Default: disabled (cleared) */ -#define XAE_OPTION_VLAN (1 << 2) +#define XAE_OPTION_VLAN BIT(2) /* Enable recognition of flow control frames on Rx. Default: enabled (set) */ -#define XAE_OPTION_FLOW_CONTROL (1 << 4) +#define XAE_OPTION_FLOW_CONTROL BIT(4) /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not * stripped. Default: disabled (set) */ -#define XAE_OPTION_FCS_STRIP (1 << 5) +#define XAE_OPTION_FCS_STRIP BIT(5) /* Generate FCS field and add PAD automatically for outgoing frames. * Default: enabled (set) */ -#define XAE_OPTION_FCS_INSERT (1 << 6) +#define XAE_OPTION_FCS_INSERT BIT(6) /* Enable Length/Type error checking for incoming frames. When this option is * set, the MAC will filter frames that have a mismatched type/length field @@ -56,13 +56,13 @@ * types of frames are encountered. When this option is cleared, the MAC will * allow these types of frames to be received. Default: enabled (set) */ -#define XAE_OPTION_LENTYPE_ERR (1 << 7) +#define XAE_OPTION_LENTYPE_ERR BIT(7) /* Enable the transmitter. Default: enabled (set) */ -#define XAE_OPTION_TXEN (1 << 11) +#define XAE_OPTION_TXEN BIT(11) /* Enable the receiver. Default: enabled (set) */ -#define XAE_OPTION_RXEN (1 << 12) +#define XAE_OPTION_RXEN BIT(12) /* Default options set when device is initialized or reset */ #define XAE_OPTION_DEFAULTS \ @@ -156,22 +156,27 @@ #define XAE_TPID0_OFFSET 0x00000028 /* VLAN TPID0 register */ #define XAE_TPID1_OFFSET 0x0000002C /* VLAN TPID1 register */ #define XAE_PPST_OFFSET 0x00000030 /* PCS PMA Soft Temac Status Reg */ +#define XAE_STATS_OFFSET 0x00000200 /* Statistics counters */ #define XAE_RCW0_OFFSET 0x00000400 /* Rx Configuration Word 0 */ #define XAE_RCW1_OFFSET 0x00000404 /* Rx Configuration Word 1 */ #define XAE_TC_OFFSET 0x00000408 /* Tx Configuration */ #define XAE_FCC_OFFSET 0x0000040C /* Flow Control Configuration */ -#define XAE_EMMC_OFFSET 0x00000410 /* EMAC mode configuration */ -#define XAE_PHYC_OFFSET 0x00000414 /* RGMII/SGMII configuration */ +#define XAE_EMMC_OFFSET 0x00000410 /* MAC speed configuration */ +#define XAE_PHYC_OFFSET 0x00000414 /* RX Max Frame Configuration */ #define XAE_ID_OFFSET 0x000004F8 /* Identification register */ -#define XAE_MDIO_MC_OFFSET 0x00000500 /* MII Management Config */ -#define XAE_MDIO_MCR_OFFSET 0x00000504 /* MII Management Control */ -#define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */ -#define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */ +#define XAE_ABILITY_OFFSET 0x000004FC /* Ability Register offset */ +#define XAE_MDIO_MC_OFFSET 0x00000500 /* MDIO Setup */ +#define XAE_MDIO_MCR_OFFSET 0x00000504 /* MDIO Control */ +#define XAE_MDIO_MWD_OFFSET 0x00000508 /* MDIO Write Data */ +#define XAE_MDIO_MRD_OFFSET 0x0000050C /* MDIO Read Data */ #define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */ #define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */ -#define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */ +#define XAE_FMI_OFFSET 0x00000708 /* Frame Filter Control */ +#define XAE_FFE_OFFSET 0x0000070C /* Frame Filter Enable */ #define XAE_AF0_OFFSET 0x00000710 /* Address Filter 0 */ #define XAE_AF1_OFFSET 0x00000714 /* Address Filter 1 */ +#define XAE_AM0_OFFSET 0x00000750 /* Frame Filter Mask Value Bytes 3-0 */ +#define XAE_AM1_OFFSET 0x00000754 /* Frame Filter Mask Value Bytes 7-4 */ #define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */ #define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */ @@ -283,6 +288,16 @@ #define XAE_PHYC_SGLINKSPD_100 0x40000000 /* SGMII link 100 Mbit */ #define XAE_PHYC_SGLINKSPD_1000 0x80000000 /* SGMII link 1000 Mbit */ +/* Bit masks for Axi Ethernet ability register */ +#define XAE_ABILITY_PFC BIT(16) +#define XAE_ABILITY_FRAME_FILTER BIT(10) +#define XAE_ABILITY_HALF_DUPLEX BIT(9) +#define XAE_ABILITY_STATS BIT(8) +#define XAE_ABILITY_2_5G BIT(3) +#define XAE_ABILITY_1G BIT(2) +#define XAE_ABILITY_100M BIT(1) +#define XAE_ABILITY_10M BIT(0) + /* Bit masks for Axi Ethernet MDIO interface MC register */ #define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable */ #define XAE_MDIO_MC_CLOCK_DIVIDE_MAX 0x3F /* Maximum MDIO divisor */ @@ -308,7 +323,7 @@ */ #define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF -/* Bit masks for Axi Ethernet FMI register */ +/* Bit masks for Axi Ethernet FMC register */ #define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */ #define XAE_FMI_IND_MASK 0x00000003 /* Index Mask */ @@ -326,11 +341,12 @@ #define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Axi Ethernet Synthesis features */ -#define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0) -#define XAE_FEATURE_PARTIAL_TX_CSUM (1 << 1) -#define XAE_FEATURE_FULL_RX_CSUM (1 << 2) -#define XAE_FEATURE_FULL_TX_CSUM (1 << 3) -#define XAE_FEATURE_DMA_64BIT (1 << 4) +#define XAE_FEATURE_PARTIAL_RX_CSUM BIT(0) +#define XAE_FEATURE_PARTIAL_TX_CSUM BIT(1) +#define XAE_FEATURE_FULL_RX_CSUM BIT(2) +#define XAE_FEATURE_FULL_TX_CSUM BIT(3) +#define XAE_FEATURE_DMA_64BIT BIT(4) +#define XAE_FEATURE_STATS BIT(5) #define XAE_NO_CSUM_OFFLOAD 0 @@ -344,6 +360,61 @@ #define XLNX_MII_STD_SELECT_REG 0x11 #define XLNX_MII_STD_SELECT_SGMII BIT(0) +/* enum temac_stat - TEMAC statistics counters + * + * Index of statistics counters within the TEMAC. This must match the + * order/offset of hardware registers exactly. + */ +enum temac_stat { + STAT_RX_BYTES = 0, + STAT_TX_BYTES, + STAT_UNDERSIZE_FRAMES, + STAT_FRAGMENT_FRAMES, + STAT_RX_64_BYTE_FRAMES, + STAT_RX_65_127_BYTE_FRAMES, + STAT_RX_128_255_BYTE_FRAMES, + STAT_RX_256_511_BYTE_FRAMES, + STAT_RX_512_1023_BYTE_FRAMES, + STAT_RX_1024_MAX_BYTE_FRAMES, + STAT_RX_OVERSIZE_FRAMES, + STAT_TX_64_BYTE_FRAMES, + STAT_TX_65_127_BYTE_FRAMES, + STAT_TX_128_255_BYTE_FRAMES, + STAT_TX_256_511_BYTE_FRAMES, + STAT_TX_512_1023_BYTE_FRAMES, + STAT_TX_1024_MAX_BYTE_FRAMES, + STAT_TX_OVERSIZE_FRAMES, + STAT_RX_GOOD_FRAMES, + STAT_RX_FCS_ERRORS, + STAT_RX_BROADCAST_FRAMES, + STAT_RX_MULTICAST_FRAMES, + STAT_RX_CONTROL_FRAMES, + STAT_RX_LENGTH_ERRORS, + STAT_RX_VLAN_FRAMES, + STAT_RX_PAUSE_FRAMES, + STAT_RX_CONTROL_OPCODE_ERRORS, + STAT_TX_GOOD_FRAMES, + STAT_TX_BROADCAST_FRAMES, + STAT_TX_MULTICAST_FRAMES, + STAT_TX_UNDERRUN_ERRORS, + STAT_TX_CONTROL_FRAMES, + STAT_TX_VLAN_FRAMES, + STAT_TX_PAUSE_FRAMES, + STAT_TX_SINGLE_COLLISION_FRAMES, + STAT_TX_MULTIPLE_COLLISION_FRAMES, + STAT_TX_DEFERRED_FRAMES, + STAT_TX_LATE_COLLISIONS, + STAT_TX_EXCESS_COLLISIONS, + STAT_TX_EXCESS_DEFERRAL, + STAT_RX_ALIGNMENT_ERRORS, + STAT_TX_PFC_FRAMES, + STAT_RX_PFC_FRAMES, + STAT_USER_DEFINED0, + STAT_USER_DEFINED1, + STAT_USER_DEFINED2, + STAT_COUNT, +}; + /** * struct axidma_bd - Axi Dma buffer descriptor layout * @next: MM2S/S2MM Next Descriptor Pointer @@ -359,6 +430,7 @@ * @app2: MM2S/S2MM User Application Field 2. * @app3: MM2S/S2MM User Application Field 3. * @app4: MM2S/S2MM User Application Field 4. + * @skb: Pointer to SKB transferred using DMA */ struct axidma_bd { u32 next; /* Physical address of next buffer descriptor */ @@ -399,7 +471,6 @@ struct skbuf_dma_descriptor { * struct axienet_local - axienet private per device data * @ndev: Pointer for net_device to which it will be attached. * @dev: Pointer to device structure - * @phy_node: Pointer to device node structure * @phylink: Pointer to phylink instance * @phylink_config: phylink configuration settings * @pcs_phy: Reference to PCS/PMA PHY if used @@ -434,7 +505,19 @@ struct skbuf_dma_descriptor { * @tx_packets: TX packet count for statistics * @tx_bytes: TX byte count for statistics * @tx_stat_sync: Synchronization object for TX stats + * @hw_stat_base: Base offset for statistics counters. This may be nonzero if + * the statistics counteres were reset or wrapped around. + * @hw_last_counter: Last-seen value of each statistic counter + * @reset_in_progress: Set while we are performing a reset and statistics + * counters may be invalid + * @hw_stats_seqcount: Sequence counter for @hw_stat_base, @hw_last_counter, + * and @reset_in_progress. + * @stats_lock: Lock for @hw_stats_seqcount + * @stats_work: Work for reading the hardware statistics counters often enough + * to catch overflows. * @dma_err_task: Work structure to process Axi DMA errors + * @stopping: Set when @dma_err_task shouldn't do anything because we are + * about to stop the device. * @tx_irq: Axidma TX IRQ number * @rx_irq: Axidma RX IRQ number * @eth_irq: Ethernet core IRQ number @@ -446,8 +529,6 @@ struct skbuf_dma_descriptor { * supported, the maximum frame size would be 9k. Else it is * 1522 bytes (assuming support for basic VLAN) * @rxmem: Stores rx memory size for jumbo frame handling. - * @csum_offload_on_tx_path: Stores the checksum selection on TX side. - * @csum_offload_on_rx_path: Stores the checksum selection on RX side. * @coalesce_count_rx: Store the irq coalesce on RX side. * @coalesce_usec_rx: IRQ coalesce delay for RX * @coalesce_count_tx: Store the irq coalesce on TX side. @@ -505,7 +586,15 @@ struct axienet_local { u64_stats_t tx_bytes; struct u64_stats_sync tx_stat_sync; + u64 hw_stat_base[STAT_COUNT]; + u32 hw_last_counter[STAT_COUNT]; + seqcount_mutex_t hw_stats_seqcount; + struct mutex stats_lock; + struct delayed_work stats_work; + bool reset_in_progress; + struct work_struct dma_err_task; + bool stopping; int tx_irq; int rx_irq; @@ -518,9 +607,6 @@ struct axienet_local { u32 max_frm_size; u32 rxmem; - int csum_offload_on_tx_path; - int csum_offload_on_rx_path; - u32 coalesce_count_rx; u32 coalesce_usec_rx; u32 coalesce_count_tx; @@ -537,7 +623,7 @@ struct axienet_local { }; /** - * struct axiethernet_option - Used to set axi ethernet hardware options + * struct axienet_option - Used to set axi ethernet hardware options * @opt: Option to be set. * @reg: Register offset to be written for setting the option * @m_or: Mask to be ORed for setting the option in the register |