diff options
Diffstat (limited to 'drivers/net/ethernet/xilinx/xilinx_emaclite.c')
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_emaclite.c | 30 |
1 files changed, 12 insertions, 18 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 57a24f62e353..d770b3ac3f74 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -823,10 +823,10 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) { struct mii_bus *bus; - int rc; struct resource res; struct device_node *np = of_get_parent(lp->phy_node); struct device_node *npp; + int rc, ret; /* Don't register the MDIO bus if the phy_node or its parent node * can't be found. @@ -836,8 +836,14 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) return -ENODEV; } npp = of_get_parent(np); - - of_address_to_resource(npp, 0, &res); + ret = of_address_to_resource(npp, 0, &res); + of_node_put(npp); + if (ret) { + dev_err(dev, "%s resource error!\n", + dev->of_node->full_name); + of_node_put(np); + return ret; + } if (lp->ndev->mem_start != res.start) { struct phy_device *phydev; phydev = of_phy_find_device(lp->phy_node); @@ -846,6 +852,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) "MDIO of the phy is not registered yet\n"); else put_device(&phydev->mdio.dev); + of_node_put(np); return 0; } @@ -858,6 +865,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) bus = mdiobus_alloc(); if (!bus) { dev_err(dev, "Failed to allocate mdiobus\n"); + of_node_put(np); return -ENOMEM; } @@ -870,6 +878,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) bus->parent = dev; rc = of_mdiobus_register(bus, np); + of_node_put(np); if (rc) { dev_err(dev, "Failed to register mdio bus.\n"); goto err_register; @@ -926,8 +935,6 @@ static int xemaclite_open(struct net_device *dev) xemaclite_disable_interrupts(lp); if (lp->phy_node) { - u32 bmcr; - lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, xemaclite_adjust_link, 0, PHY_INTERFACE_MODE_MII); @@ -938,19 +945,6 @@ static int xemaclite_open(struct net_device *dev) /* EmacLite doesn't support giga-bit speeds */ phy_set_max_speed(lp->phy_dev, SPEED_100); - - /* Don't advertise 1000BASE-T Full/Half duplex speeds */ - phy_write(lp->phy_dev, MII_CTRL1000, 0); - - /* Advertise only 10 and 100mbps full/half duplex speeds */ - phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL | - ADVERTISE_CSMA); - - /* Restart auto negotiation */ - bmcr = phy_read(lp->phy_dev, MII_BMCR); - bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); - phy_write(lp->phy_dev, MII_BMCR, bmcr); - phy_start(lp->phy_dev); } |