diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_common.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 440 |
1 files changed, 351 insertions, 89 deletions
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index cb2e8e18dd39..c4730cd39b22 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -55,6 +55,12 @@ static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm); static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num); static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); +static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, + u16 offset); /** * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx @@ -585,6 +591,8 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) /* Set default semaphore delay to 10ms which is a well * tested value */ eeprom->semaphore_delay = 10; + /* Clear EEPROM page size, it will be initialized as needed */ + eeprom->word_page_size = 0; /* * Check for EEPROM present first. @@ -617,26 +625,78 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) } /** - * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM + * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word to be written to the EEPROM + * @offset: offset within the EEPROM to write + * @words: number of words + * @data: 16 bit word(s) to write to EEPROM * - * If ixgbe_eeprom_update_checksum is not called after this function, the - * EEPROM will most likely contain an invalid checksum. + * Reads 16 bit word(s) from EEPROM through bit-bang method **/ -s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) { - s32 status; - u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; + s32 status = 0; + u16 i, count; hw->eeprom.ops.init_params(hw); - if (offset >= hw->eeprom.word_size) { + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset + words > hw->eeprom.word_size) { status = IXGBE_ERR_EEPROM; goto out; } + /* + * The EEPROM page size cannot be queried from the chip. We do lazy + * initialization. It is worth to do that when we write large buffer. + */ + if ((hw->eeprom.word_page_size == 0) && + (words > IXGBE_EEPROM_PAGE_SIZE_MAX)) + ixgbe_detect_eeprom_page_size_generic(hw, offset); + + /* + * We cannot hold synchronization semaphores for too long + * to avoid other entity starvation. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { + count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? + IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i, + count, &data[i]); + + if (status != 0) + break; + } + +out: + return status; +} + +/** + * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @words: number of word(s) + * @data: 16 bit word(s) to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status; + u16 word; + u16 page_size; + u16 i; + u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; + /* Prepare the EEPROM for writing */ status = ixgbe_acquire_eeprom(hw); @@ -648,62 +708,147 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) } if (status == 0) { - ixgbe_standby_eeprom(hw); + for (i = 0; i < words; i++) { + ixgbe_standby_eeprom(hw); - /* Send the WRITE ENABLE command (8 bit opcode ) */ - ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_WREN_OPCODE_SPI, - IXGBE_EEPROM_OPCODE_BITS); + /* Send the WRITE ENABLE command (8 bit opcode ) */ + ixgbe_shift_out_eeprom_bits(hw, + IXGBE_EEPROM_WREN_OPCODE_SPI, + IXGBE_EEPROM_OPCODE_BITS); - ixgbe_standby_eeprom(hw); + ixgbe_standby_eeprom(hw); - /* - * Some SPI eeproms use the 8th address bit embedded in the - * opcode - */ - if ((hw->eeprom.address_bits == 8) && (offset >= 128)) - write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + /* + * Some SPI eeproms use the 8th address bit embedded + * in the opcode + */ + if ((hw->eeprom.address_bits == 8) && + ((offset + i) >= 128)) + write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the Write command (8-bit opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, write_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), + hw->eeprom.address_bits); + + page_size = hw->eeprom.word_page_size; + + /* Send the data in burst via SPI*/ + do { + word = data[i]; + word = (word >> 8) | (word << 8); + ixgbe_shift_out_eeprom_bits(hw, word, 16); + + if (page_size == 0) + break; + + /* do not wrap around page */ + if (((offset + i) & (page_size - 1)) == + (page_size - 1)) + break; + } while (++i < words); + + ixgbe_standby_eeprom(hw); + usleep_range(10000, 20000); + } + /* Done with writing - release the EEPROM */ + ixgbe_release_eeprom(hw); + } - /* Send the Write command (8-bit opcode + addr) */ - ixgbe_shift_out_eeprom_bits(hw, write_opcode, - IXGBE_EEPROM_OPCODE_BITS); - ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2), - hw->eeprom.address_bits); + return status; +} - /* Send the data */ - data = (data >> 8) | (data << 8); - ixgbe_shift_out_eeprom_bits(hw, data, 16); - ixgbe_standby_eeprom(hw); +/** + * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status; - /* Done with writing - release the EEPROM */ - ixgbe_release_eeprom(hw); + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; } + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data); + out: return status; } /** - * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang + * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang * @hw: pointer to hardware structure * @offset: offset within the EEPROM to be read - * @data: read 16 bit value from EEPROM + * @words: number of word(s) + * @data: read 16 bit words(s) from EEPROM * - * Reads 16 bit value from EEPROM through bit-bang method + * Reads 16 bit word(s) from EEPROM through bit-bang method **/ -s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 *data) +s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) { - s32 status; - u16 word_in; - u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; + s32 status = 0; + u16 i, count; hw->eeprom.ops.init_params(hw); - if (offset >= hw->eeprom.word_size) { + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset + words > hw->eeprom.word_size) { status = IXGBE_ERR_EEPROM; goto out; } + /* + * We cannot hold synchronization semaphores for too long + * to avoid other entity starvation. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { + count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? + IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i, + count, &data[i]); + + if (status != 0) + break; + } + +out: + return status; +} + +/** + * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @words: number of word(s) + * @data: read 16 bit word(s) from EEPROM + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status; + u16 word_in; + u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; + u16 i; + /* Prepare the EEPROM for reading */ status = ixgbe_acquire_eeprom(hw); @@ -715,104 +860,208 @@ s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, } if (status == 0) { - ixgbe_standby_eeprom(hw); + for (i = 0; i < words; i++) { + ixgbe_standby_eeprom(hw); + /* + * Some SPI eeproms use the 8th address bit embedded + * in the opcode + */ + if ((hw->eeprom.address_bits == 8) && + ((offset + i) >= 128)) + read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the READ command (opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, read_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), + hw->eeprom.address_bits); + + /* Read the data. */ + word_in = ixgbe_shift_in_eeprom_bits(hw, 16); + data[i] = (word_in >> 8) | (word_in << 8); + } - /* - * Some SPI eeproms use the 8th address bit embedded in the - * opcode - */ - if ((hw->eeprom.address_bits == 8) && (offset >= 128)) - read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + /* End this read operation */ + ixgbe_release_eeprom(hw); + } - /* Send the READ command (opcode + addr) */ - ixgbe_shift_out_eeprom_bits(hw, read_opcode, - IXGBE_EEPROM_OPCODE_BITS); - ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2), - hw->eeprom.address_bits); + return status; +} - /* Read the data. */ - word_in = ixgbe_shift_in_eeprom_bits(hw, 16); - *data = (word_in >> 8) | (word_in << 8); +/** + * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit value from EEPROM + * + * Reads 16 bit value from EEPROM through bit-bang method + **/ +s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 *data) +{ + s32 status; - /* End this read operation */ - ixgbe_release_eeprom(hw); + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; } + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); + out: return status; } /** - * ixgbe_read_eerd_generic - Read EEPROM word using EERD + * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM + * @offset: offset of word in the EEPROM to read + * @words: number of word(s) + * @data: 16 bit word(s) from the EEPROM * - * Reads a 16 bit word from the EEPROM using the EERD register. + * Reads a 16 bit word(s) from the EEPROM using the EERD register. **/ -s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) +s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) { u32 eerd; - s32 status; + s32 status = 0; + u32 i; hw->eeprom.ops.init_params(hw); + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + if (offset >= hw->eeprom.word_size) { status = IXGBE_ERR_EEPROM; goto out; } - eerd = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) + - IXGBE_EEPROM_RW_REG_START; + for (i = 0; i < words; i++) { + eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) + + IXGBE_EEPROM_RW_REG_START; - IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); + IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); - if (status == 0) - *data = (IXGBE_READ_REG(hw, IXGBE_EERD) >> - IXGBE_EEPROM_RW_REG_DATA); - else - hw_dbg(hw, "Eeprom read timed out\n"); + if (status == 0) { + data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >> + IXGBE_EEPROM_RW_REG_DATA); + } else { + hw_dbg(hw, "Eeprom read timed out\n"); + goto out; + } + } +out: + return status; +} +/** + * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be used as a scratch pad + * + * Discover EEPROM page size by writing marching data at given offset. + * This function is called only when we are writing a new large buffer + * at given offset so the data would be overwritten anyway. + **/ +static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, + u16 offset) +{ + u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX]; + s32 status = 0; + u16 i; + + for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++) + data[i] = i; + + hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX; + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, + IXGBE_EEPROM_PAGE_SIZE_MAX, data); + hw->eeprom.word_page_size = 0; + if (status != 0) + goto out; + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); + if (status != 0) + goto out; + + /* + * When writing in burst more than the actual page size + * EEPROM address wraps around current page. + */ + hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0]; + + hw_dbg(hw, "Detected EEPROM page size = %d words.", + hw->eeprom.word_page_size); out: return status; } /** - * ixgbe_write_eewr_generic - Write EEPROM word using EEWR + * ixgbe_read_eerd_generic - Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data); +} + +/** + * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR * @hw: pointer to hardware structure * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM + * @words: number of words + * @data: word(s) write to the EEPROM * - * Write a 16 bit word to the EEPROM using the EEWR register. + * Write a 16 bit word(s) to the EEPROM using the EEWR register. **/ -s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) { u32 eewr; - s32 status; + s32 status = 0; + u16 i; hw->eeprom.ops.init_params(hw); + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + if (offset >= hw->eeprom.word_size) { status = IXGBE_ERR_EEPROM; goto out; } - eewr = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) | - (data << IXGBE_EEPROM_RW_REG_DATA) | IXGBE_EEPROM_RW_REG_START; + for (i = 0; i < words; i++) { + eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | + (data[i] << IXGBE_EEPROM_RW_REG_DATA) | + IXGBE_EEPROM_RW_REG_START; - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); - if (status != 0) { - hw_dbg(hw, "Eeprom write EEWR timed out\n"); - goto out; - } + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } - IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); + IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); - if (status != 0) { - hw_dbg(hw, "Eeprom write EEWR timed out\n"); - goto out; + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } } out: @@ -820,6 +1069,19 @@ out: } /** + * ixgbe_write_eewr_generic - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data); +} + +/** * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status * @hw: pointer to hardware structure * @ee_reg: EEPROM flag for polling |