summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/b43/phy_common.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/b43/phy_common.h')
-rw-r--r--drivers/net/wireless/b43/phy_common.h413
1 files changed, 413 insertions, 0 deletions
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
new file mode 100644
index 000000000000..c9f5430d1d7d
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -0,0 +1,413 @@
+#ifndef LINUX_B43_PHY_COMMON_H_
+#define LINUX_B43_PHY_COMMON_H_
+
+#include <linux/rfkill.h>
+
+struct b43_wldev;
+
+
+/* PHY register routing bits */
+#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */
+#define B43_PHYROUTE_BASE 0x0000 /* Base registers */
+#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */
+#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */
+#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */
+
+/* CCK (B-PHY) registers. */
+#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE)
+/* N-PHY registers. */
+#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE)
+/* N-PHY BMODE registers. */
+#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE)
+/* OFDM (A-PHY) registers. */
+#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY)
+/* Extended G-PHY registers. */
+#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY)
+
+
+/* Masks for the PHY versioning registers. */
+#define B43_PHYVER_ANALOG 0xF000
+#define B43_PHYVER_ANALOG_SHIFT 12
+#define B43_PHYVER_TYPE 0x0F00
+#define B43_PHYVER_TYPE_SHIFT 8
+#define B43_PHYVER_VERSION 0x00FF
+
+/**
+ * enum b43_interference_mitigation - Interference Mitigation mode
+ *
+ * @B43_INTERFMODE_NONE: Disabled
+ * @B43_INTERFMODE_NONWLAN: Non-WLAN Interference Mitigation
+ * @B43_INTERFMODE_MANUALWLAN: WLAN Interference Mitigation
+ * @B43_INTERFMODE_AUTOWLAN: Automatic WLAN Interference Mitigation
+ */
+enum b43_interference_mitigation {
+ B43_INTERFMODE_NONE,
+ B43_INTERFMODE_NONWLAN,
+ B43_INTERFMODE_MANUALWLAN,
+ B43_INTERFMODE_AUTOWLAN,
+};
+
+/* Antenna identifiers */
+enum {
+ B43_ANTENNA0, /* Antenna 0 */
+ B43_ANTENNA1, /* Antenna 0 */
+ B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */
+ B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */
+ B43_ANTENNA2,
+ B43_ANTENNA3 = 8,
+
+ B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0,
+ B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO,
+};
+
+/**
+ * enum b43_txpwr_result - Return value for the recalc_txpower PHY op.
+ *
+ * @B43_TXPWR_RES_NEED_ADJUST: Values changed. Hardware adjustment is needed.
+ * @B43_TXPWR_RES_DONE: No more work to do. Everything is done.
+ */
+enum b43_txpwr_result {
+ B43_TXPWR_RES_NEED_ADJUST,
+ B43_TXPWR_RES_DONE,
+};
+
+/**
+ * struct b43_phy_operations - Function pointers for PHY ops.
+ *
+ * @allocate: Allocate and initialise the PHY data structures.
+ * Must not be NULL.
+ * @free: Destroy and free the PHY data structures.
+ * Must not be NULL.
+ *
+ * @prepare_structs: Prepare the PHY data structures.
+ * The data structures allocated in @allocate are
+ * initialized here.
+ * Must not be NULL.
+ * @prepare_hardware: Prepare the PHY. This is called before b43_chip_init to
+ * do some early early PHY hardware init.
+ * Can be NULL, if not required.
+ * @init: Initialize the PHY.
+ * Must not be NULL.
+ * @exit: Shutdown the PHY.
+ * Can be NULL, if not required.
+ *
+ * @phy_read: Read from a PHY register.
+ * Must not be NULL.
+ * @phy_write: Write to a PHY register.
+ * Must not be NULL.
+ * @radio_read: Read from a Radio register.
+ * Must not be NULL.
+ * @radio_write: Write to a Radio register.
+ * Must not be NULL.
+ *
+ * @supports_hwpctl: Returns a boolean whether Hardware Power Control
+ * is supported or not.
+ * If NULL, hwpctl is assumed to be never supported.
+ * @software_rfkill: Turn the radio ON or OFF.
+ * Possible state values are
+ * RFKILL_STATE_SOFT_BLOCKED or
+ * RFKILL_STATE_UNBLOCKED
+ * Must not be NULL.
+ * @switch_analog: Turn the Analog on/off.
+ * Must not be NULL.
+ * @switch_channel: Switch the radio to another channel.
+ * Must not be NULL.
+ * @get_default_chan: Just returns the default channel number.
+ * Must not be NULL.
+ * @set_rx_antenna: Set the antenna used for RX.
+ * Can be NULL, if not supported.
+ * @interf_mitigation: Switch the Interference Mitigation mode.
+ * Can be NULL, if not supported.
+ *
+ * @recalc_txpower: Recalculate the transmission power parameters.
+ * This callback has to recalculate the TX power settings,
+ * but does not need to write them to the hardware, yet.
+ * Returns enum b43_txpwr_result to indicate whether the hardware
+ * needs to be adjusted.
+ * If B43_TXPWR_NEED_ADJUST is returned, @adjust_txpower
+ * will be called later.
+ * If the parameter "ignore_tssi" is true, the TSSI values should
+ * be ignored and a recalculation of the power settings should be
+ * done even if the TSSI values did not change.
+ * This callback is called with wl->irq_lock held and must not sleep.
+ * Must not be NULL.
+ * @adjust_txpower: Write the previously calculated TX power settings
+ * (from @recalc_txpower) to the hardware.
+ * This function may sleep.
+ * Can be NULL, if (and ONLY if) @recalc_txpower _always_
+ * returns B43_TXPWR_RES_DONE.
+ *
+ * @pwork_15sec: Periodic work. Called every 15 seconds.
+ * Can be NULL, if not required.
+ * @pwork_60sec: Periodic work. Called every 60 seconds.
+ * Can be NULL, if not required.
+ */
+struct b43_phy_operations {
+ /* Initialisation */
+ int (*allocate)(struct b43_wldev *dev);
+ void (*free)(struct b43_wldev *dev);
+ void (*prepare_structs)(struct b43_wldev *dev);
+ int (*prepare_hardware)(struct b43_wldev *dev);
+ int (*init)(struct b43_wldev *dev);
+ void (*exit)(struct b43_wldev *dev);
+
+ /* Register access */
+ u16 (*phy_read)(struct b43_wldev *dev, u16 reg);
+ void (*phy_write)(struct b43_wldev *dev, u16 reg, u16 value);
+ u16 (*radio_read)(struct b43_wldev *dev, u16 reg);
+ void (*radio_write)(struct b43_wldev *dev, u16 reg, u16 value);
+
+ /* Radio */
+ bool (*supports_hwpctl)(struct b43_wldev *dev);
+ void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state);
+ void (*switch_analog)(struct b43_wldev *dev, bool on);
+ int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel);
+ unsigned int (*get_default_chan)(struct b43_wldev *dev);
+ void (*set_rx_antenna)(struct b43_wldev *dev, int antenna);
+ int (*interf_mitigation)(struct b43_wldev *dev,
+ enum b43_interference_mitigation new_mode);
+
+ /* Transmission power adjustment */
+ enum b43_txpwr_result (*recalc_txpower)(struct b43_wldev *dev,
+ bool ignore_tssi);
+ void (*adjust_txpower)(struct b43_wldev *dev);
+
+ /* Misc */
+ void (*pwork_15sec)(struct b43_wldev *dev);
+ void (*pwork_60sec)(struct b43_wldev *dev);
+};
+
+struct b43_phy_a;
+struct b43_phy_g;
+struct b43_phy_n;
+struct b43_phy_lp;
+
+struct b43_phy {
+ /* Hardware operation callbacks. */
+ const struct b43_phy_operations *ops;
+
+ /* Most hardware context information is stored in the standard-
+ * specific data structures pointed to by the pointers below.
+ * Only one of them is valid (the currently enabled PHY). */
+#ifdef CONFIG_B43_DEBUG
+ /* No union for debug build to force NULL derefs in buggy code. */
+ struct {
+#else
+ union {
+#endif
+ /* A-PHY specific information */
+ struct b43_phy_a *a;
+ /* G-PHY specific information */
+ struct b43_phy_g *g;
+ /* N-PHY specific information */
+ struct b43_phy_n *n;
+ /* LP-PHY specific information */
+ struct b43_phy_lp *lp;
+ };
+
+ /* Band support flags. */
+ bool supports_2ghz;
+ bool supports_5ghz;
+
+ /* GMODE bit enabled? */
+ bool gmode;
+
+ /* Analog Type */
+ u8 analog;
+ /* B43_PHYTYPE_ */
+ u8 type;
+ /* PHY revision number. */
+ u8 rev;
+
+ /* Radio versioning */
+ u16 radio_manuf; /* Radio manufacturer */
+ u16 radio_ver; /* Radio version */
+ u8 radio_rev; /* Radio revision */
+
+ /* Software state of the radio */
+ bool radio_on;
+
+ /* Desired TX power level (in dBm).
+ * This is set by the user and adjusted in b43_phy_xmitpower(). */
+ int desired_txpower;
+
+ /* Hardware Power Control enabled? */
+ bool hardware_power_control;
+
+ /* The time (in absolute jiffies) when the next TX power output
+ * check is needed. */
+ unsigned long next_txpwr_check_time;
+
+ /* current channel */
+ unsigned int channel;
+
+ /* PHY TX errors counter. */
+ atomic_t txerr_cnt;
+
+#ifdef CONFIG_B43_DEBUG
+ /* PHY registers locked by b43_phy_lock()? */
+ bool phy_locked;
+#endif /* B43_DEBUG */
+};
+
+
+/**
+ * b43_phy_allocate - Allocate PHY structs
+ * Allocate the PHY data structures, based on the current dev->phy.type
+ */
+int b43_phy_allocate(struct b43_wldev *dev);
+
+/**
+ * b43_phy_free - Free PHY structs
+ */
+void b43_phy_free(struct b43_wldev *dev);
+
+/**
+ * b43_phy_init - Initialise the PHY
+ */
+int b43_phy_init(struct b43_wldev *dev);
+
+/**
+ * b43_phy_exit - Cleanup PHY
+ */
+void b43_phy_exit(struct b43_wldev *dev);
+
+/**
+ * b43_has_hardware_pctl - Hardware Power Control supported?
+ * Returns a boolean, whether hardware power control is supported.
+ */
+bool b43_has_hardware_pctl(struct b43_wldev *dev);
+
+/**
+ * b43_phy_read - 16bit PHY register read access
+ */
+u16 b43_phy_read(struct b43_wldev *dev, u16 reg);
+
+/**
+ * b43_phy_write - 16bit PHY register write access
+ */
+void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value);
+
+/**
+ * b43_phy_mask - Mask a PHY register with a mask
+ */
+void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask);
+
+/**
+ * b43_phy_set - OR a PHY register with a bitmap
+ */
+void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set);
+
+/**
+ * b43_phy_maskset - Mask and OR a PHY register with a mask and bitmap
+ */
+void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set);
+
+/**
+ * b43_radio_read - 16bit Radio register read access
+ */
+u16 b43_radio_read(struct b43_wldev *dev, u16 reg);
+#define b43_radio_read16 b43_radio_read /* DEPRECATED */
+
+/**
+ * b43_radio_write - 16bit Radio register write access
+ */
+void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value);
+#define b43_radio_write16 b43_radio_write /* DEPRECATED */
+
+/**
+ * b43_radio_mask - Mask a 16bit radio register with a mask
+ */
+void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask);
+
+/**
+ * b43_radio_set - OR a 16bit radio register with a bitmap
+ */
+void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set);
+
+/**
+ * b43_radio_maskset - Mask and OR a radio register with a mask and bitmap
+ */
+void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set);
+
+/**
+ * b43_radio_lock - Lock firmware radio register access
+ */
+void b43_radio_lock(struct b43_wldev *dev);
+
+/**
+ * b43_radio_unlock - Unlock firmware radio register access
+ */
+void b43_radio_unlock(struct b43_wldev *dev);
+
+/**
+ * b43_phy_lock - Lock firmware PHY register access
+ */
+void b43_phy_lock(struct b43_wldev *dev);
+
+/**
+ * b43_phy_unlock - Unlock firmware PHY register access
+ */
+void b43_phy_unlock(struct b43_wldev *dev);
+
+/**
+ * b43_switch_channel - Switch to another channel
+ */
+int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel);
+/**
+ * B43_DEFAULT_CHANNEL - Switch to the default channel.
+ */
+#define B43_DEFAULT_CHANNEL UINT_MAX
+
+/**
+ * b43_software_rfkill - Turn the radio ON or OFF in software.
+ */
+void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state);
+
+/**
+ * b43_phy_txpower_check - Check TX power output.
+ *
+ * Compare the current TX power output to the desired power emission
+ * and schedule an adjustment in case it mismatches.
+ * Requires wl->irq_lock locked.
+ *
+ * @flags: OR'ed enum b43_phy_txpower_check_flags flags.
+ * See the docs below.
+ */
+void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags);
+/**
+ * enum b43_phy_txpower_check_flags - Flags for b43_phy_txpower_check()
+ *
+ * @B43_TXPWR_IGNORE_TIME: Ignore the schedule time and force-redo
+ * the check now.
+ * @B43_TXPWR_IGNORE_TSSI: Redo the recalculation, even if the average
+ * TSSI did not change.
+ */
+enum b43_phy_txpower_check_flags {
+ B43_TXPWR_IGNORE_TIME = (1 << 0),
+ B43_TXPWR_IGNORE_TSSI = (1 << 1),
+};
+
+struct work_struct;
+void b43_phy_txpower_adjust_work(struct work_struct *work);
+
+/**
+ * b43_phy_shm_tssi_read - Read the average of the last 4 TSSI from SHM.
+ *
+ * @shm_offset: The SHM address to read the values from.
+ *
+ * Returns the average of the 4 TSSI values, or a negative error code.
+ */
+int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset);
+
+/**
+ * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog.
+ *
+ * It does the switching based on the PHY0 core register.
+ * Do _not_ call this directly. Only use it as a switch_analog callback
+ * for struct b43_phy_operations.
+ */
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
+
+
+#endif /* LINUX_B43_PHY_COMMON_H_ */