summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-agn.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-agn.c')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c172
1 files changed, 91 insertions, 81 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6aeb82b6992f..8b8e3e1cbb44 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
@@ -1258,7 +1259,15 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
/* Ack/clear/reset pending uCode interrupts.
* Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
*/
- iwl_write32(priv, CSR_INT, priv->inta);
+ /* There is a hardware bug in the interrupt mask function that some
+ * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
+ * they are disabled in the CSR_INT_MASK register. Furthermore the
+ * ICT interrupt handling mechanism has another bug that might cause
+ * these unmasked interrupts fail to be detected. We workaround the
+ * hardware bugs here by ACKing all the possible interrupts so that
+ * interrupt coalescing can still be achieved.
+ */
+ iwl_write32(priv, CSR_INT, priv->inta | ~priv->inta_mask);
inta = priv->inta;
@@ -1463,59 +1472,66 @@ static void iwl_nic_start(struct iwl_priv *priv)
}
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
+static int iwl_mac_setup_register(struct iwl_priv *priv);
+
+static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
+{
+ const char *name_pre = priv->cfg->fw_name_pre;
+
+ if (first)
+ priv->fw_index = priv->cfg->ucode_api_max;
+ else
+ priv->fw_index--;
+
+ if (priv->fw_index < priv->cfg->ucode_api_min) {
+ IWL_ERR(priv, "no suitable firmware found!\n");
+ return -ENOENT;
+ }
+
+ sprintf(priv->firmware_name, "%s%d%s",
+ name_pre, priv->fw_index, ".ucode");
+
+ IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
+ priv->firmware_name);
+
+ return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
+ &priv->pci_dev->dev, GFP_KERNEL, priv,
+ iwl_ucode_callback);
+}
+
/**
- * iwl_read_ucode - Read uCode images from disk file.
+ * iwl_ucode_callback - callback when firmware was loaded
*
- * Copy into buffers for card to fetch via bus-mastering
+ * If loaded successfully, copies the firmware into buffers
+ * for the card to fetch (via DMA).
*/
-static int iwl_read_ucode(struct iwl_priv *priv)
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
{
+ struct iwl_priv *priv = context;
struct iwl_ucode_header *ucode;
- int ret = -EINVAL, index;
- const struct firmware *ucode_raw;
- const char *name_pre = priv->cfg->fw_name_pre;
const unsigned int api_max = priv->cfg->ucode_api_max;
const unsigned int api_min = priv->cfg->ucode_api_min;
- char buf[25];
u8 *src;
size_t len;
u32 api_ver, build;
u32 inst_size, data_size, init_size, init_data_size, boot_size;
+ int err;
u16 eeprom_ver;
- /* Ask kernel firmware_class module to get the boot firmware off disk.
- * request_firmware() is synchronous, file is in memory on return. */
- for (index = api_max; index >= api_min; index--) {
- sprintf(buf, "%s%d%s", name_pre, index, ".ucode");
- ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
- if (ret < 0) {
- IWL_ERR(priv, "%s firmware file req failed: %d\n",
- buf, ret);
- if (ret == -ENOENT)
- continue;
- else
- goto error;
- } else {
- if (index < api_max)
- IWL_ERR(priv, "Loaded firmware %s, "
- "which is deprecated. "
- "Please use API v%u instead.\n",
- buf, api_max);
-
- IWL_DEBUG_INFO(priv, "Got firmware '%s' file (%zd bytes) from disk\n",
- buf, ucode_raw->size);
- break;
- }
+ if (!ucode_raw) {
+ IWL_ERR(priv, "request for firmware file '%s' failed.\n",
+ priv->firmware_name);
+ goto try_again;
}
- if (ret < 0)
- goto error;
+ IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
+ priv->firmware_name, ucode_raw->size);
/* Make sure that we got at least the v1 header! */
if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
IWL_ERR(priv, "File size way too small!\n");
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
/* Data from ucode file: header followed by uCode images */
@@ -1540,10 +1556,9 @@ static int iwl_read_ucode(struct iwl_priv *priv)
IWL_ERR(priv, "Driver unable to support your firmware API. "
"Driver supports v%u, firmware is v%u.\n",
api_max, api_ver);
- priv->ucode_ver = 0;
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
+
if (api_ver != api_max)
IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
"got v%u. New firmware can be obtained "
@@ -1585,6 +1600,12 @@ static int iwl_read_ucode(struct iwl_priv *priv)
IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
boot_size);
+ /*
+ * For any of the failures below (before allocating pci memory)
+ * we will try to load a version with a smaller API -- maybe the
+ * user just got a corrupted version of the latest API.
+ */
+
/* Verify size of file vs. image size info in file's header */
if (ucode_raw->size !=
priv->cfg->ops->ucode->get_header_size(api_ver) +
@@ -1594,41 +1615,35 @@ static int iwl_read_ucode(struct iwl_priv *priv)
IWL_DEBUG_INFO(priv,
"uCode file size %d does not match expected size\n",
(int)ucode_raw->size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
/* Verify that uCode images will fit in card's SRAM */
if (inst_size > priv->hw_params.max_inst_size) {
IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
inst_size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
if (data_size > priv->hw_params.max_data_size) {
IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
data_size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
if (init_size > priv->hw_params.max_inst_size) {
IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
init_size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
if (init_data_size > priv->hw_params.max_data_size) {
IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
init_data_size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
if (boot_size > priv->hw_params.max_bsm_size) {
IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
boot_size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
/* Allocate ucode buffers for card's bus-master loading ... */
@@ -1712,20 +1727,36 @@ static int iwl_read_ucode(struct iwl_priv *priv)
IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
memcpy(priv->ucode_boot.v_addr, src, len);
+ /**************************************************
+ * This is still part of probe() in a sense...
+ *
+ * 9. Setup and register with mac80211 and debugfs
+ **************************************************/
+ err = iwl_mac_setup_register(priv);
+ if (err)
+ goto out_unbind;
+
+ err = iwl_dbgfs_register(priv, DRV_NAME);
+ if (err)
+ IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
- return 0;
+ return;
+
+ try_again:
+ /* try next, if any */
+ if (iwl_request_firmware(priv, false))
+ goto out_unbind;
+ release_firmware(ucode_raw);
+ return;
err_pci_alloc:
IWL_ERR(priv, "failed to allocate pci memory\n");
- ret = -ENOMEM;
iwl_dealloc_ucode_pci(priv);
-
- err_release:
+ out_unbind:
+ device_release_driver(&priv->pci_dev->dev);
release_firmware(ucode_raw);
-
- error:
- return ret;
}
static const char *desc_lookup_text[] = {
@@ -2622,7 +2653,7 @@ static int iwl_mac_setup_register(struct iwl_priv *priv)
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
- hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY |
+ hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
WIPHY_FLAG_DISABLE_BEACON_HINTS;
/*
@@ -2631,7 +2662,7 @@ static int iwl_mac_setup_register(struct iwl_priv *priv)
*/
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
- hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX + 1;
+ hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
@@ -2667,21 +2698,7 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
/* we should be verifying the device is ready to be opened */
mutex_lock(&priv->mutex);
-
- /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
- * ucode filename and max sizes are card-specific. */
-
- if (!priv->ucode_code.len) {
- ret = iwl_read_ucode(priv);
- if (ret) {
- IWL_ERR(priv, "Could not read microcode: %d\n", ret);
- mutex_unlock(&priv->mutex);
- return ret;
- }
- }
-
ret = __iwl_up(priv);
-
mutex_unlock(&priv->mutex);
if (ret)
@@ -3654,17 +3671,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
iwl_power_initialize(priv);
iwl_tt_initialize(priv);
- /**************************************************
- * 9. Setup and register with mac80211 and debugfs
- **************************************************/
- err = iwl_mac_setup_register(priv);
+ err = iwl_request_firmware(priv, true);
if (err)
goto out_remove_sysfs;
- err = iwl_dbgfs_register(priv, DRV_NAME);
- if (err)
- IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
return 0;
out_remove_sysfs: