summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r--drivers/pci/pci.c341
1 files changed, 239 insertions, 102 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6d6120007af4..16fd0d4c3166 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -20,6 +20,8 @@
#include <linux/pm_wakeup.h>
#include <linux/interrupt.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
+#include <linux/device.h>
+#include <asm/setup.h>
#include "pci.h"
unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
@@ -426,7 +428,6 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
* given PCI device
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
- * @wait: If 'true', wait for the device to change its power state
*
* RETURN VALUE:
* -EINVAL if the requested state is invalid.
@@ -435,12 +436,15 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
* 0 if device already is in the requested state.
* 0 if device's power state has been successfully changed.
*/
-static int
-pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
+static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
{
u16 pmcsr;
bool need_restore = false;
+ /* Check if we're already there */
+ if (dev->current_state == state)
+ return 0;
+
if (!dev->pm_cap)
return -EIO;
@@ -451,10 +455,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
*/
- if (dev->current_state == state) {
- /* we're already there */
- return 0;
- } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold
+ if (state != PCI_D0 && dev->current_state <= PCI_D3cold
&& dev->current_state > state) {
dev_err(&dev->dev, "invalid power transition "
"(from state %d to %d)\n", dev->current_state, state);
@@ -481,10 +482,8 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
break;
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
- && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) {
+ && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
need_restore = true;
- wait = true;
- }
/* Fall-through: force to D0 */
default:
pmcsr = 0;
@@ -494,9 +493,6 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
/* enter specified state */
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
- if (!wait)
- return 0;
-
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
@@ -521,7 +517,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
if (need_restore)
pci_restore_bars(dev);
- if (wait && dev->bus->self)
+ if (dev->bus->self)
pcie_aspm_pm_state_change(dev->bus->self);
return 0;
@@ -546,11 +542,58 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
}
/**
+ * pci_platform_power_transition - Use platform to change device power state
+ * @dev: PCI device to handle.
+ * @state: State to put the device into.
+ */
+static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
+{
+ int error;
+
+ if (platform_pci_power_manageable(dev)) {
+ error = platform_pci_set_power_state(dev, state);
+ if (!error)
+ pci_update_current_state(dev, state);
+ } else {
+ error = -ENODEV;
+ /* Fall back to PCI_D0 if native PM is not supported */
+ pci_update_current_state(dev, PCI_D0);
+ }
+
+ return error;
+}
+
+/**
+ * __pci_start_power_transition - Start power transition of a PCI device
+ * @dev: PCI device to handle.
+ * @state: State to put the device into.
+ */
+static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
+{
+ if (state == PCI_D0)
+ pci_platform_power_transition(dev, PCI_D0);
+}
+
+/**
+ * __pci_complete_power_transition - Complete power transition of a PCI device
+ * @dev: PCI device to handle.
+ * @state: State to put the device into.
+ *
+ * This function should not be called directly by device drivers.
+ */
+int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
+{
+ return state > PCI_D0 ?
+ pci_platform_power_transition(dev, state) : -EINVAL;
+}
+EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
+
+/**
* pci_set_power_state - Set the power state of a PCI device
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
*
- * Transition a device to a new power state, using the platform formware and/or
+ * Transition a device to a new power state, using the platform firmware and/or
* the device's PCI PM registers.
*
* RETURN VALUE:
@@ -577,30 +620,21 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
*/
return 0;
- if (state == PCI_D0 && platform_pci_power_manageable(dev)) {
- /*
- * Allow the platform to change the state, for example via ACPI
- * _PR0, _PS0 and some such, but do not trust it.
- */
- int ret = platform_pci_set_power_state(dev, PCI_D0);
- if (!ret)
- pci_update_current_state(dev, PCI_D0);
- }
+ /* Check if we're already there */
+ if (dev->current_state == state)
+ return 0;
+
+ __pci_start_power_transition(dev, state);
+
/* This device is quirked not to be put into D3, so
don't put it in D3 */
if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
return 0;
- error = pci_raw_set_power_state(dev, state, true);
+ error = pci_raw_set_power_state(dev, state);
- if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
- /* Allow the platform to finalize the transition */
- int ret = platform_pci_set_power_state(dev, state);
- if (!ret) {
- pci_update_current_state(dev, state);
- error = 0;
- }
- }
+ if (!__pci_complete_power_transition(dev, state))
+ error = 0;
return error;
}
@@ -645,6 +679,8 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
EXPORT_SYMBOL(pci_choose_state);
+#define PCI_EXP_SAVE_REGS 7
+
static int pci_save_pcie_state(struct pci_dev *dev)
{
int pos, i = 0;
@@ -657,7 +693,7 @@ static int pci_save_pcie_state(struct pci_dev *dev)
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
if (!save_state) {
- dev_err(&dev->dev, "buffer not found in %s\n", __FUNCTION__);
+ dev_err(&dev->dev, "buffer not found in %s\n", __func__);
return -ENOMEM;
}
cap = (u16 *)&save_state->data[0];
@@ -666,6 +702,9 @@ static int pci_save_pcie_state(struct pci_dev *dev)
pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
return 0;
}
@@ -686,6 +725,9 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
}
@@ -700,7 +742,7 @@ static int pci_save_pcix_state(struct pci_dev *dev)
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
if (!save_state) {
- dev_err(&dev->dev, "buffer not found in %s\n", __FUNCTION__);
+ dev_err(&dev->dev, "buffer not found in %s\n", __func__);
return -ENOMEM;
}
@@ -773,6 +815,7 @@ pci_restore_state(struct pci_dev *dev)
}
pci_restore_pcix_state(dev);
pci_restore_msi_state(dev);
+ pci_restore_iov_state(dev);
return 0;
}
@@ -801,7 +844,7 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars)
*/
int pci_reenable_device(struct pci_dev *dev)
{
- if (atomic_read(&dev->enable_cnt))
+ if (pci_is_enabled(dev))
return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
return 0;
}
@@ -999,7 +1042,7 @@ static void do_pci_disable_device(struct pci_dev *dev)
*/
void pci_disable_enabled_device(struct pci_dev *dev)
{
- if (atomic_read(&dev->enable_cnt))
+ if (pci_is_enabled(dev))
do_pci_disable_device(dev);
}
@@ -1231,7 +1274,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
if (target_state == PCI_POWER_ERROR)
return -EIO;
- pci_enable_wake(dev, target_state, true);
+ pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
error = pci_set_power_state(dev, target_state);
@@ -1369,7 +1412,8 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev)
{
int error;
- error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP, 4 * sizeof(u16));
+ error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP,
+ PCI_EXP_SAVE_REGS * sizeof(u16));
if (error)
dev_err(&dev->dev,
"unable to preallocate PCI Express save buffer\n");
@@ -1381,50 +1425,6 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev)
}
/**
- * pci_restore_standard_config - restore standard config registers of PCI device
- * @dev: PCI device to handle
- *
- * This function assumes that the device's configuration space is accessible.
- * If the device needs to be powered up, the function will wait for it to
- * change the state.
- */
-int pci_restore_standard_config(struct pci_dev *dev)
-{
- pci_power_t prev_state;
- int error;
-
- pci_update_current_state(dev, PCI_D0);
-
- prev_state = dev->current_state;
- if (prev_state == PCI_D0)
- goto Restore;
-
- error = pci_raw_set_power_state(dev, PCI_D0, false);
- if (error)
- return error;
-
- /*
- * This assumes that we won't get a bus in B2 or B3 from the BIOS, but
- * we've made this assumption forever and it appears to be universally
- * satisfied.
- */
- switch(prev_state) {
- case PCI_D3cold:
- case PCI_D3hot:
- mdelay(pci_pm_d3_delay);
- break;
- case PCI_D2:
- udelay(PCI_PM_D2_DELAY);
- break;
- }
-
- pci_update_current_state(dev, PCI_D0);
-
- Restore:
- return dev->state_saved ? pci_restore_state(dev) : 0;
-}
-
-/**
* pci_enable_ari - enable ARI forwarding if hardware support it
* @dev: the PCI device
*/
@@ -1484,7 +1484,7 @@ pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
if (!pin)
return -1;
- while (dev->bus->self) {
+ while (dev->bus->parent) {
pin = pci_swizzle_interrupt_pin(dev, pin);
dev = dev->bus->self;
}
@@ -1504,7 +1504,7 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
{
u8 pin = *pinp;
- while (dev->bus->self) {
+ while (dev->bus->parent) {
pin = pci_swizzle_interrupt_pin(dev, pin);
dev = dev->bus->self;
}
@@ -2028,18 +2028,24 @@ static int __pcie_flr(struct pci_dev *dev, int probe)
pci_block_user_cfg_access(dev);
/* Wait for Transaction Pending bit clean */
+ pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
+ if (!(status & PCI_EXP_DEVSTA_TRPND))
+ goto transaction_done;
+
msleep(100);
pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
- if (status & PCI_EXP_DEVSTA_TRPND) {
- dev_info(&dev->dev, "Busy after 100ms while trying to reset; "
+ if (!(status & PCI_EXP_DEVSTA_TRPND))
+ goto transaction_done;
+
+ dev_info(&dev->dev, "Busy after 100ms while trying to reset; "
"sleeping for 1 second\n");
- ssleep(1);
- pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
- if (status & PCI_EXP_DEVSTA_TRPND)
- dev_info(&dev->dev, "Still busy after 1s; "
+ ssleep(1);
+ pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
+ if (status & PCI_EXP_DEVSTA_TRPND)
+ dev_info(&dev->dev, "Still busy after 1s; "
"proceeding with reset anyway\n");
- }
+transaction_done:
pci_write_config_word(dev, exppos + PCI_EXP_DEVCTL,
PCI_EXP_DEVCTL_BCR_FLR);
mdelay(100);
@@ -2066,18 +2072,24 @@ static int __pci_af_flr(struct pci_dev *dev, int probe)
pci_block_user_cfg_access(dev);
/* Wait for Transaction Pending bit clean */
+ pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
+ if (!(status & PCI_AF_STATUS_TP))
+ goto transaction_done;
+
msleep(100);
pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
- if (status & PCI_AF_STATUS_TP) {
- dev_info(&dev->dev, "Busy after 100ms while trying to"
- " reset; sleeping for 1 second\n");
- ssleep(1);
- pci_read_config_byte(dev,
- cappos + PCI_AF_STATUS, &status);
- if (status & PCI_AF_STATUS_TP)
- dev_info(&dev->dev, "Still busy after 1s; "
- "proceeding with reset anyway\n");
- }
+ if (!(status & PCI_AF_STATUS_TP))
+ goto transaction_done;
+
+ dev_info(&dev->dev, "Busy after 100ms while trying to"
+ " reset; sleeping for 1 second\n");
+ ssleep(1);
+ pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
+ if (status & PCI_AF_STATUS_TP)
+ dev_info(&dev->dev, "Still busy after 1s; "
+ "proceeding with reset anyway\n");
+
+transaction_done:
pci_write_config_byte(dev, cappos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
mdelay(100);
@@ -2346,18 +2358,140 @@ int pci_select_bars(struct pci_dev *dev, unsigned long flags)
*/
int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
{
+ int reg;
+
if (resno < PCI_ROM_RESOURCE) {
*type = pci_bar_unknown;
return PCI_BASE_ADDRESS_0 + 4 * resno;
} else if (resno == PCI_ROM_RESOURCE) {
*type = pci_bar_mem32;
return dev->rom_base_reg;
+ } else if (resno < PCI_BRIDGE_RESOURCES) {
+ /* device specific resource */
+ reg = pci_iov_resource_bar(dev, resno, type);
+ if (reg)
+ return reg;
}
dev_err(&dev->dev, "BAR: invalid resource #%d\n", resno);
return 0;
}
+#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
+static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
+spinlock_t resource_alignment_lock = SPIN_LOCK_UNLOCKED;
+
+/**
+ * pci_specified_resource_alignment - get resource alignment specified by user.
+ * @dev: the PCI device to get
+ *
+ * RETURNS: Resource alignment if it is specified.
+ * Zero if it is not specified.
+ */
+resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
+{
+ int seg, bus, slot, func, align_order, count;
+ resource_size_t align = 0;
+ char *p;
+
+ spin_lock(&resource_alignment_lock);
+ p = resource_alignment_param;
+ while (*p) {
+ count = 0;
+ if (sscanf(p, "%d%n", &align_order, &count) == 1 &&
+ p[count] == '@') {
+ p += count + 1;
+ } else {
+ align_order = -1;
+ }
+ if (sscanf(p, "%x:%x:%x.%x%n",
+ &seg, &bus, &slot, &func, &count) != 4) {
+ seg = 0;
+ if (sscanf(p, "%x:%x.%x%n",
+ &bus, &slot, &func, &count) != 3) {
+ /* Invalid format */
+ printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
+ p);
+ break;
+ }
+ }
+ p += count;
+ if (seg == pci_domain_nr(dev->bus) &&
+ bus == dev->bus->number &&
+ slot == PCI_SLOT(dev->devfn) &&
+ func == PCI_FUNC(dev->devfn)) {
+ if (align_order == -1) {
+ align = PAGE_SIZE;
+ } else {
+ align = 1 << align_order;
+ }
+ /* Found */
+ break;
+ }
+ if (*p != ';' && *p != ',') {
+ /* End of param or invalid format */
+ break;
+ }
+ p++;
+ }
+ spin_unlock(&resource_alignment_lock);
+ return align;
+}
+
+/**
+ * pci_is_reassigndev - check if specified PCI is target device to reassign
+ * @dev: the PCI device to check
+ *
+ * RETURNS: non-zero for PCI device is a target device to reassign,
+ * or zero is not.
+ */
+int pci_is_reassigndev(struct pci_dev *dev)
+{
+ return (pci_specified_resource_alignment(dev) != 0);
+}
+
+ssize_t pci_set_resource_alignment_param(const char *buf, size_t count)
+{
+ if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1)
+ count = RESOURCE_ALIGNMENT_PARAM_SIZE - 1;
+ spin_lock(&resource_alignment_lock);
+ strncpy(resource_alignment_param, buf, count);
+ resource_alignment_param[count] = '\0';
+ spin_unlock(&resource_alignment_lock);
+ return count;
+}
+
+ssize_t pci_get_resource_alignment_param(char *buf, size_t size)
+{
+ size_t count;
+ spin_lock(&resource_alignment_lock);
+ count = snprintf(buf, size, "%s", resource_alignment_param);
+ spin_unlock(&resource_alignment_lock);
+ return count;
+}
+
+static ssize_t pci_resource_alignment_show(struct bus_type *bus, char *buf)
+{
+ return pci_get_resource_alignment_param(buf, PAGE_SIZE);
+}
+
+static ssize_t pci_resource_alignment_store(struct bus_type *bus,
+ const char *buf, size_t count)
+{
+ return pci_set_resource_alignment_param(buf, count);
+}
+
+BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
+ pci_resource_alignment_store);
+
+static int __init pci_resource_alignment_sysfs_init(void)
+{
+ return bus_create_file(&pci_bus_type,
+ &bus_attr_resource_alignment);
+}
+
+late_initcall(pci_resource_alignment_sysfs_init);
+
static void __devinit pci_no_domains(void)
{
#ifdef CONFIG_PCI_DOMAINS
@@ -2406,6 +2540,9 @@ static int __init pci_setup(char *str)
pci_cardbus_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "cbmemsize=", 10)) {
pci_cardbus_mem_size = memparse(str + 10, &str);
+ } else if (!strncmp(str, "resource_alignment=", 19)) {
+ pci_set_resource_alignment_param(str + 19,
+ strlen(str + 19));
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 04:44:45 +0000