diff options
Diffstat (limited to 'drivers/regulator/bd9576-regulator.c')
| -rw-r--r-- | drivers/regulator/bd9576-regulator.c | 337 |
1 files changed, 337 insertions, 0 deletions
diff --git a/drivers/regulator/bd9576-regulator.c b/drivers/regulator/bd9576-regulator.c new file mode 100644 index 000000000000..a8b5832a5a1b --- /dev/null +++ b/drivers/regulator/bd9576-regulator.c @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2020 ROHM Semiconductors +// ROHM BD9576MUF/BD9573MUF regulator driver + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/rohm-bd957x.h> +#include <linux/mfd/rohm-generic.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/slab.h> + +#define BD957X_VOUTS1_VOLT 3300000 +#define BD957X_VOUTS4_BASE_VOLT 1030000 +#define BD957X_VOUTS34_NUM_VOLT 32 + +static int vout1_volt_table[] = {5000000, 4900000, 4800000, 4700000, 4600000, + 4500000, 4500000, 4500000, 5000000, 5100000, + 5200000, 5300000, 5400000, 5500000, 5500000, + 5500000}; + +static int vout2_volt_table[] = {1800000, 1780000, 1760000, 1740000, 1720000, + 1700000, 1680000, 1660000, 1800000, 1820000, + 1840000, 1860000, 1880000, 1900000, 1920000, + 1940000}; + +static int voutl1_volt_table[] = {2500000, 2540000, 2580000, 2620000, 2660000, + 2700000, 2740000, 2780000, 2500000, 2460000, + 2420000, 2380000, 2340000, 2300000, 2260000, + 2220000}; + +struct bd957x_regulator_data { + struct regulator_desc desc; + int base_voltage; +}; + +static int bd957x_vout34_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + const struct regulator_desc *desc = rdev->desc; + int multiplier = selector & desc->vsel_mask & 0x7f; + int tune; + + /* VOUT3 and 4 has 10mV step */ + tune = multiplier * 10000; + + if (!(selector & 0x80)) + return desc->fixed_uV - tune; + + return desc->fixed_uV + tune; +} + +static int bd957x_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + const struct regulator_desc *desc = rdev->desc; + int index = selector & desc->vsel_mask & 0x7f; + + if (!(selector & 0x80)) + index += desc->n_voltages/2; + + if (index >= desc->n_voltages) + return -EINVAL; + + return desc->volt_table[index]; +} + +static const struct regulator_ops bd957x_vout34_ops = { + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = bd957x_vout34_list_voltage, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops bd957X_vouts1_regulator_ops = { + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_ops bd957x_ops = { + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = bd957x_list_voltage, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static struct bd957x_regulator_data bd9576_regulators[] = { + { + .desc = { + .name = "VD50", + .of_match = of_match_ptr("regulator-vd50"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VD50, + .type = REGULATOR_VOLTAGE, + .ops = &bd957x_ops, + .volt_table = &vout1_volt_table[0], + .n_voltages = ARRAY_SIZE(vout1_volt_table), + .vsel_reg = BD957X_REG_VOUT1_TUNE, + .vsel_mask = BD957X_MASK_VOUT1_TUNE, + .enable_reg = BD957X_REG_POW_TRIGGER1, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "VD18", + .of_match = of_match_ptr("regulator-vd18"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VD18, + .type = REGULATOR_VOLTAGE, + .ops = &bd957x_ops, + .volt_table = &vout2_volt_table[0], + .n_voltages = ARRAY_SIZE(vout2_volt_table), + .vsel_reg = BD957X_REG_VOUT2_TUNE, + .vsel_mask = BD957X_MASK_VOUT2_TUNE, + .enable_reg = BD957X_REG_POW_TRIGGER2, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "VDDDR", + .of_match = of_match_ptr("regulator-vdddr"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VDDDR, + .ops = &bd957x_vout34_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD957X_VOUTS34_NUM_VOLT, + .vsel_reg = BD957X_REG_VOUT3_TUNE, + .vsel_mask = BD957X_MASK_VOUT3_TUNE, + .enable_reg = BD957X_REG_POW_TRIGGER3, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "VD10", + .of_match = of_match_ptr("regulator-vd10"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VD10, + .ops = &bd957x_vout34_ops, + .type = REGULATOR_VOLTAGE, + .fixed_uV = BD957X_VOUTS4_BASE_VOLT, + .n_voltages = BD957X_VOUTS34_NUM_VOLT, + .vsel_reg = BD957X_REG_VOUT4_TUNE, + .vsel_mask = BD957X_MASK_VOUT4_TUNE, + .enable_reg = BD957X_REG_POW_TRIGGER4, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "VOUTL1", + .of_match = of_match_ptr("regulator-voutl1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VOUTL1, + .ops = &bd957x_ops, + .type = REGULATOR_VOLTAGE, + .volt_table = &voutl1_volt_table[0], + .n_voltages = ARRAY_SIZE(voutl1_volt_table), + .vsel_reg = BD957X_REG_VOUTL1_TUNE, + .vsel_mask = BD957X_MASK_VOUTL1_TUNE, + .enable_reg = BD957X_REG_POW_TRIGGERL1, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "VOUTS1", + .of_match = of_match_ptr("regulator-vouts1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VOUTS1, + .ops = &bd957X_vouts1_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 1, + .fixed_uV = BD957X_VOUTS1_VOLT, + .enable_reg = BD957X_REG_POW_TRIGGERS1, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + }, +}; + +static int bd957x_probe(struct platform_device *pdev) +{ + struct regmap *regmap; + struct regulator_config config = { 0 }; + int i, err; + bool vout_mode, ddr_sel; + const struct bd957x_regulator_data *reg_data = &bd9576_regulators[0]; + unsigned int num_reg_data = ARRAY_SIZE(bd9576_regulators); + enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) { + dev_err(&pdev->dev, "No regmap\n"); + return -EINVAL; + } + vout_mode = of_property_read_bool(pdev->dev.parent->of_node, + "rohm,vout1-en-low"); + if (vout_mode) { + struct gpio_desc *en; + + dev_dbg(&pdev->dev, "GPIO controlled mode\n"); + + /* VOUT1 enable state judged by VOUT1_EN pin */ + /* See if we have GPIO defined */ + en = devm_gpiod_get_from_of_node(&pdev->dev, + pdev->dev.parent->of_node, + "rohm,vout1-en-gpios", 0, + GPIOD_OUT_LOW, "vout1-en"); + if (!IS_ERR(en)) { + /* VOUT1_OPS gpio ctrl */ + /* + * Regulator core prioritizes the ena_gpio over + * enable/disable/is_enabled callbacks so no need to + * clear them. We can still use same ops + */ + config.ena_gpiod = en; + } else { + /* + * In theory it is possible someone wants to set + * vout1-en LOW during OTP loading and set VOUT1 to be + * controlled by GPIO - but control the GPIO from some + * where else than this driver. For that to work we + * should unset the is_enabled callback here. + * + * I believe such case where rohm,vout1-en-low is set + * and vout1-en-gpios is not is likely to be a + * misconfiguration. So let's just err out for now. + */ + dev_err(&pdev->dev, + "Failed to get VOUT1 control GPIO\n"); + return PTR_ERR(en); + } + } + + /* + * If more than one PMIC needs to be controlled by same processor then + * allocate the regulator data array here and use bd9576_regulators as + * template. At the moment I see no such use-case so I spare some + * bytes and use bd9576_regulators directly for non-constant configs + * like DDR voltage selection. + */ + ddr_sel = of_property_read_bool(pdev->dev.parent->of_node, + "rohm,ddr-sel-low"); + if (ddr_sel) + bd9576_regulators[2].desc.fixed_uV = 1350000; + else + bd9576_regulators[2].desc.fixed_uV = 1500000; + + switch (chip) { + case ROHM_CHIP_TYPE_BD9576: + dev_dbg(&pdev->dev, "Found BD9576MUF\n"); + break; + case ROHM_CHIP_TYPE_BD9573: + dev_dbg(&pdev->dev, "Found BD9573MUF\n"); + break; + default: + dev_err(&pdev->dev, "Unsupported chip type\n"); + err = -EINVAL; + goto err; + } + + config.dev = pdev->dev.parent; + config.regmap = regmap; + + for (i = 0; i < num_reg_data; i++) { + + const struct regulator_desc *desc; + struct regulator_dev *rdev; + const struct bd957x_regulator_data *r; + + r = ®_data[i]; + desc = &r->desc; + + rdev = devm_regulator_register(&pdev->dev, desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + desc->name); + err = PTR_ERR(rdev); + goto err; + } + /* + * Clear the VOUT1 GPIO setting - rest of the regulators do not + * support GPIO control + */ + config.ena_gpiod = NULL; + } + +err: + return err; +} + +static const struct platform_device_id bd957x_pmic_id[] = { + { "bd9573-pmic", ROHM_CHIP_TYPE_BD9573 }, + { "bd9576-pmic", ROHM_CHIP_TYPE_BD9576 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, bd957x_pmic_id); + +static struct platform_driver bd957x_regulator = { + .driver = { + .name = "bd957x-pmic", + }, + .probe = bd957x_probe, + .id_table = bd957x_pmic_id, +}; + +module_platform_driver(bd957x_regulator); + +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("ROHM BD9576/BD9573 voltage regulator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bd957x-pmic"); |