diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/Kconfig | 8 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/regulator/pf8x00-regulator.c | 496 |
3 files changed, 505 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 4c2073a20899..a497a3729091 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -812,6 +812,14 @@ config REGULATOR_PCF50633 Say Y here to support the voltage regulators and converters on PCF50633 +config REGULATOR_PF8X00 + tristate "NXP PF8100/PF8121A/PF8200 regulator driver" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support the regulators found on the NXP + PF8100/PF8121A/PF8200 PMIC. + config REGULATOR_PFUZE100 tristate "Freescale PFUZE100/200/3000/3001 regulator driver" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 4e5a06f82de6..680e539f6579 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -102,6 +102,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o +obj-$(CONFIG_REGULATOR_PF8X00) += pf8x00-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c new file mode 100644 index 000000000000..308c27fa6ea8 --- /dev/null +++ b/drivers/regulator/pf8x00-regulator.c @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 NXP + * Copyright (C) 2019 Boundary Devices + * Copyright (C) 2020 Amarula Solutions(India) + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +/* registers */ +#define PF8X00_DEVICEID 0x00 +#define PF8X00_REVID 0x01 +#define PF8X00_EMREV 0x02 +#define PF8X00_PROGID 0x03 +#define PF8X00_IMS_INT 0x04 +#define PF8X00_IMS_THERM 0x07 +#define PF8X00_SW_MODE_INT 0x0a +#define PF8X00_SW_MODE_MASK 0x0b +#define PF8X00_IMS_SW_ILIM 0x12 +#define PF8X00_IMS_LDO_ILIM 0x15 +#define PF8X00_IMS_SW_UV 0x18 +#define PF8X00_IMS_SW_OV 0x1b +#define PF8X00_IMS_LDO_UV 0x1e +#define PF8X00_IMS_LDO_OV 0x21 +#define PF8X00_IMS_PWRON 0x24 +#define PF8X00_SYS_INT 0x27 +#define PF8X00_HARD_FAULT 0x29 +#define PF8X00_FSOB_FLAGS 0x2a +#define PF8X00_FSOB_SELECT 0x2b +#define PF8X00_ABIST_OV1 0x2c +#define PF8X00_ABIST_OV2 0x2d +#define PF8X00_ABIST_UV1 0x2e +#define PF8X00_ABIST_UV2 0x2f +#define PF8X00_TEST_FLAGS 0x30 +#define PF8X00_ABIST_RUN 0x31 +#define PF8X00_RANDOM_GEN 0x33 +#define PF8X00_RANDOM_CHK 0x34 +#define PF8X00_VMONEN1 0x35 +#define PF8X00_VMONEN2 0x36 +#define PF8X00_CTRL1 0x37 +#define PF8X00_CTRL2 0x38 +#define PF8X00_CTRL3 0x39 +#define PF8X00_PWRUP_CTRL 0x3a +#define PF8X00_RESETBMCU 0x3c +#define PF8X00_PGOOD 0x3d +#define PF8X00_PWRDN_DLY1 0x3e +#define PF8X00_PWRDN_DLY2 0x3f +#define PF8X00_FREQ_CTRL 0x40 +#define PF8X00_COINCELL_CTRL 0x41 +#define PF8X00_PWRON 0x42 +#define PF8X00_WD_CONFIG 0x43 +#define PF8X00_WD_CLEAR 0x44 +#define PF8X00_WD_EXPIRE 0x45 +#define PF8X00_WD_COUNTER 0x46 +#define PF8X00_FAULT_COUNTER 0x47 +#define PF8X00_FSAFE_COUNTER 0x48 +#define PF8X00_FAULT_TIMER 0x49 +#define PF8X00_AMUX 0x4a +#define PF8X00_SW1_CONFIG1 0x4d +#define PF8X00_LDO1_CONFIG1 0x85 +#define PF8X00_VSNVS_CONFIG1 0x9d +#define PF8X00_PAGE_SELECT 0x9f + +/* regulators */ +enum pf8x00_regulators { + PF8X00_LDO1, + PF8X00_LDO2, + PF8X00_LDO3, + PF8X00_LDO4, + PF8X00_BUCK1, + PF8X00_BUCK2, + PF8X00_BUCK3, + PF8X00_BUCK4, + PF8X00_BUCK5, + PF8X00_BUCK6, + PF8X00_BUCK7, + PF8X00_VSNVS, + + PF8X00_MAX_REGULATORS, +}; + +enum pf8x00_buck_states { + SW_CONFIG1, + SW_CONFIG2, + SW_PWRUP, + SW_MODE1, + SW_RUN_VOLT, + SW_STBY_VOLT, +}; +#define PF8X00_SW_BASE(i) (8 * (i - PF8X00_BUCK1) + PF8X00_SW1_CONFIG1) + +enum pf8x00_ldo_states { + LDO_CONFIG1, + LDO_CONFIG2, + LDO_PWRUP, + LDO_RUN_VOLT, + LDO_STBY_VOLT, +}; +#define PF8X00_LDO_BASE(i) (6 * (i - PF8X00_LDO1) + PF8X00_LDO1_CONFIG1) + +enum swxilim_bits { + SWXILIM_2100_MA, + SWXILIM_2600_MA, + SWXILIM_3000_MA, + SWXILIM_4500_MA, +}; +#define PF8X00_SWXILIM_SHIFT 3 +#define PF8X00_SWXILIM_MASK GENMASK(4, 3) +#define PF8X00_SWXPHASE_MASK GENMASK(2, 0) +#define PF8X00_SWXPHASE_DEFAULT 0 +#define PF8X00_SWXPHASE_SHIFT 7 + +enum pf8x00_devid { + PF8100 = 0x0, + PF8121A = BIT(1), + PF8200 = BIT(3), +}; +#define PF8X00_FAM BIT(6) +#define PF8X00_DEVICE_FAM_MASK GENMASK(7, 4) +#define PF8X00_DEVICE_ID_MASK GENMASK(3, 0) + +struct pf8x00_regulator { + struct regulator_desc desc; + u8 ilim; + u8 phase_shift; +}; + +struct pf8x00_chip { + struct regmap *regmap; + struct device *dev; +}; + +static const struct regmap_config pf8x00_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = PF8X00_PAGE_SELECT, + .cache_type = REGCACHE_RBTREE, +}; + +/* VLDOx output: 1.5V to 5.0V */ +static const int pf8x00_ldo_voltages[] = { + 1500000, 1600000, 1800000, 1850000, 2150000, 2500000, 2800000, 3000000, + 3100000, 3150000, 3200000, 3300000, 3350000, 1650000, 1700000, 5000000, +}; + +#define SWV(i) (6250 * i + 400000) +#define SWV_LINE(i) SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \ + SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7) + +/* Output: 0.4V to 1.8V */ +static const int pf8x00_sw1_to_6_voltages[] = { + SWV_LINE(0), + SWV_LINE(1), + SWV_LINE(2), + SWV_LINE(3), + SWV_LINE(4), + SWV_LINE(5), + SWV_LINE(6), + SWV_LINE(7), + SWV_LINE(8), + SWV_LINE(9), + SWV_LINE(10), + SWV_LINE(11), + SWV_LINE(12), + SWV_LINE(13), + SWV_LINE(14), + SWV_LINE(15), + SWV_LINE(16), + SWV_LINE(17), + SWV_LINE(18), + SWV_LINE(19), + SWV_LINE(20), + SWV_LINE(21), + 1500000, 1800000, +}; + +/* Output: 1.0V to 4.1V */ +static const int pf8x00_sw7_voltages[] = { + 1000000, 1100000, 1200000, 1250000, 1300000, 1350000, 1500000, 1600000, + 1800000, 1850000, 2000000, 2100000, 2150000, 2250000, 2300000, 2400000, + 2500000, 2800000, 3150000, 3200000, 3250000, 3300000, 3350000, 3400000, + 3500000, 3800000, 4000000, 4100000, 4100000, 4100000, 4100000, 4100000, +}; + +/* Output: 1.8V, 3.0V, or 3.3V */ +static const int pf8x00_vsnvs_voltages[] = { + 0, 1800000, 3000000, 3300000, +}; + +static struct pf8x00_regulator *desc_to_regulator(const struct regulator_desc *desc) +{ + return container_of(desc, struct pf8x00_regulator, desc); +} + +static void swxilim_select(const struct regulator_desc *desc, int ilim) +{ + struct pf8x00_regulator *data = desc_to_regulator(desc); + u8 ilim_sel; + + switch (ilim) { + case 2100: + ilim_sel = SWXILIM_2100_MA; + break; + case 2600: + ilim_sel = SWXILIM_2600_MA; + break; + case 3000: + ilim_sel = SWXILIM_3000_MA; + break; + case 4500: + ilim_sel = SWXILIM_4500_MA; + break; + default: + ilim_sel = SWXILIM_2100_MA; + break; + } + + data->ilim = ilim_sel; +} + +static int pf8x00_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct pf8x00_regulator *data = desc_to_regulator(desc); + struct pf8x00_chip *chip = config->driver_data; + int phase; + int val; + int ret; + + ret = of_property_read_u32(np, "nxp,ilim-ma", &val); + if (ret) + dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use 2100 mA\n", + desc->id - PF8X00_LDO4); + + swxilim_select(desc, val); + + ret = of_property_read_u32(np, "nxp,phase-shift", &val); + if (ret) { + dev_dbg(chip->dev, + "unspecified phase-shift for BUCK%d, use 0 degrees\n", + desc->id - PF8X00_LDO4); + val = PF8X00_SWXPHASE_DEFAULT; + } + + phase = val / 45; + if ((phase * 45) != val) { + dev_warn(config->dev, + "invalid phase_shift %d for BUCK%d, use 0 degrees\n", + (phase * 45), desc->id - PF8X00_LDO4); + phase = PF8X00_SWXPHASE_SHIFT; + } + + data->phase_shift = (phase >= 1) ? phase - 1 : PF8X00_SWXPHASE_SHIFT; + + return 0; +} + +static const struct regulator_ops pf8x00_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops pf8x00_buck_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops pf8x00_vsnvs_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +#define PF8X00LDO(_id, _name, base, voltages) \ + [PF8X00_LDO ## _id] = { \ + .desc = { \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pf8x00_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PF8X00_LDO ## _id, \ + .owner = THIS_MODULE, \ + .volt_table = voltages, \ + .vsel_reg = (base) + LDO_RUN_VOLT, \ + .vsel_mask = 0xff, \ + .enable_reg = (base) + LDO_CONFIG2, \ + .enable_val = 0x2, \ + .disable_val = 0x0, \ + .enable_mask = 2, \ + }, \ + } + +#define PF8X00BUCK(_id, _name, base, voltages) \ + [PF8X00_BUCK ## _id] = { \ + .desc = { \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .of_parse_cb = pf8x00_of_parse_cb, \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pf8x00_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PF8X00_BUCK ## _id, \ + .owner = THIS_MODULE, \ + .volt_table = voltages, \ + .vsel_reg = (base) + SW_RUN_VOLT, \ + .vsel_mask = 0xff, \ + .enable_reg = (base) + SW_MODE1, \ + .enable_val = 0x3, \ + .disable_val = 0x0, \ + .enable_mask = 0x3, \ + .enable_time = 500, \ + }, \ + } + +#define PF8X00VSNVS(_name, base, voltages) \ + [PF8X00_VSNVS] = { \ + .desc = { \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pf8x00_vsnvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PF8X00_VSNVS, \ + .owner = THIS_MODULE, \ + .volt_table = voltages, \ + .vsel_reg = (base), \ + .vsel_mask = 0x3, \ + }, \ + } + +static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = { + PF8X00LDO(1, "ldo1", PF8X00_LDO_BASE(PF8X00_LDO1), pf8x00_ldo_voltages), + PF8X00LDO(2, "ldo2", PF8X00_LDO_BASE(PF8X00_LDO2), pf8x00_ldo_voltages), + PF8X00LDO(3, "ldo3", PF8X00_LDO_BASE(PF8X00_LDO3), pf8x00_ldo_voltages), + PF8X00LDO(4, "ldo4", PF8X00_LDO_BASE(PF8X00_LDO4), pf8x00_ldo_voltages), + PF8X00BUCK(1, "buck1", PF8X00_SW_BASE(PF8X00_BUCK1), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(2, "buck2", PF8X00_SW_BASE(PF8X00_BUCK2), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(3, "buck3", PF8X00_SW_BASE(PF8X00_BUCK3), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages), + PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages), +}; + +static int pf8x00_identify(struct pf8x00_chip *chip) +{ + unsigned int value; + u8 dev_fam, dev_id; + const char *name = NULL; + int ret; + + ret = regmap_read(chip->regmap, PF8X00_DEVICEID, &value); + if (ret) { + dev_err(chip->dev, "failed to read chip family\n"); + return ret; + } + + dev_fam = value & PF8X00_DEVICE_FAM_MASK; + switch (dev_fam) { + case PF8X00_FAM: + break; + default: + dev_err(chip->dev, + "Chip 0x%x is not from PF8X00 family\n", dev_fam); + return ret; + } + + dev_id = value & PF8X00_DEVICE_ID_MASK; + switch (dev_id) { + case PF8100: + name = "PF8100"; + break; + case PF8121A: + name = "PF8121A"; + break; + case PF8200: + name = "PF8100"; + break; + default: + dev_err(chip->dev, "Unknown pf8x00 device id 0x%x\n", dev_id); + return -ENODEV; + } + + dev_info(chip->dev, "%s PMIC found.\n", name); + + return 0; +} + +static int pf8x00_i2c_probe(struct i2c_client *client) +{ + struct regulator_config config = { NULL, }; + struct pf8x00_chip *chip; + int id; + int ret; + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + chip->dev = &client->dev; + + chip->regmap = devm_regmap_init_i2c(client, &pf8x00_regmap_config); + if (IS_ERR(chip->regmap)) { + ret = PTR_ERR(chip->regmap); + dev_err(&client->dev, + "regmap allocation failed with err %d\n", ret); + return ret; + } + + ret = pf8x00_identify(chip); + if (ret) + return ret; + + for (id = 0; id < ARRAY_SIZE(pf8x00_regulators_data); id++) { + struct pf8x00_regulator *data = &pf8x00_regulators_data[id]; + struct regulator_dev *rdev; + + config.dev = chip->dev; + config.driver_data = chip; + config.regmap = chip->regmap; + + rdev = devm_regulator_register(&client->dev, &data->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&client->dev, + "failed to register %s regulator\n", data->desc.name); + return PTR_ERR(rdev); + } + + if ((id >= PF8X00_BUCK1) && (id <= PF8X00_BUCK7)) { + u8 reg = PF8X00_SW_BASE(id) + SW_CONFIG2; + + regmap_update_bits(chip->regmap, reg, + PF8X00_SWXPHASE_MASK, + data->phase_shift); + + regmap_update_bits(chip->regmap, reg, + PF8X00_SWXILIM_MASK, + data->ilim << PF8X00_SWXILIM_SHIFT); + } + } + + return 0; +} + +static const struct of_device_id pf8x00_dt_ids[] = { + { .compatible = "nxp,pf8x00",}, + { } +}; +MODULE_DEVICE_TABLE(of, pf8x00_dt_ids); + +static const struct i2c_device_id pf8x00_i2c_id[] = { + { "pf8x00", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, pf8x00_i2c_id); + +static struct i2c_driver pf8x00_regulator_driver = { + .id_table = pf8x00_i2c_id, + .driver = { + .name = "pf8x00", + .of_match_table = pf8x00_dt_ids, + }, + .probe_new = pf8x00_i2c_probe, +}; +module_i2c_driver(pf8x00_regulator_driver); + +MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); +MODULE_AUTHOR("Troy Kisky <troy.kisky@boundarydevices.com>"); +MODULE_DESCRIPTION("Regulator Driver for NXP's PF8100/PF8121A/PF8200 PMIC"); +MODULE_LICENSE("GPL v2"); |