22 files changed, 324 insertions, 215 deletions

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index d3e58d763b43..532313e0725e 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -496,8 +496,8 @@ do_read:
 			offset = 0;
 		}
 
-		rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, addr, offset,
-		    SFP_BLOCK_SIZE);
+		rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, ha->sfp_data,
+		    addr, offset, SFP_BLOCK_SIZE, 0);
 		if (rval != QLA_SUCCESS) {
 			qla_printk(KERN_WARNING, ha,
 			    "Unable to read SFP data (%x/%x/%x).\n", rval,
@@ -628,12 +628,12 @@ qla2x00_sysfs_write_edc(struct file *filp, struct kobject *kobj,
 
 	memcpy(ha->edc_data, &buf[8], len);
 
-	rval = qla2x00_write_edc(vha, dev, adr, ha->edc_data_dma,
-	    ha->edc_data, len, opt);
+	rval = qla2x00_write_sfp(vha, ha->edc_data_dma, ha->edc_data,
+	    dev, adr, len, opt);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2(qla_printk(KERN_INFO, ha,
 		    "Unable to write EDC (%x) %02x:%02x:%04x:%02x:%02x.\n",
-		    rval, dev, adr, opt, len, *buf));
+		    rval, dev, adr, opt, len, buf[8]));
 		return 0;
 	}
 
@@ -685,8 +685,8 @@ qla2x00_sysfs_write_edc_status(struct file *filp, struct kobject *kobj,
 			return -EINVAL;
 
 	memset(ha->edc_data, 0, len);
-	rval = qla2x00_read_edc(vha, dev, adr, ha->edc_data_dma,
-	    ha->edc_data, len, opt);
+	rval = qla2x00_read_sfp(vha, ha->edc_data_dma, ha->edc_data,
+			dev, adr, len, opt);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2(qla_printk(KERN_INFO, ha,
 		    "Unable to write EDC status (%x) %02x:%02x:%04x:%02x.\n",
@@ -1568,7 +1568,7 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
 
 	/* Now that the rport has been deleted, set the fcport state to
 	   FCS_DEVICE_DEAD */
-	atomic_set(&fcport->state, FCS_DEVICE_DEAD);
+	qla2x00_set_fcport_state(fcport, FCS_DEVICE_DEAD);
 
 	/*
 	 * Transport has effectively 'deleted' the rport, clear
@@ -1877,14 +1877,15 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
 
 	scsi_remove_host(vha->host);
 
+	/* Allow timer to run to drain queued items, when removing vp */
+	qla24xx_deallocate_vp_id(vha);
+
 	if (vha->timer_active) {
 		qla2x00_vp_stop_timer(vha);
 		DEBUG15(printk(KERN_INFO "scsi(%ld): timer for the vport[%d]"
 		" = %p has stopped\n", vha->host_no, vha->vp_idx, vha));
 	}
 
-	qla24xx_deallocate_vp_id(vha);
-
 	/* No pending activities shall be there on the vha now */
 	DEBUG(msleep(random32()%10));  /* Just to see if something falls on
 					* the net we have placed below */
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 903b0586ded3..8c10e2c4928e 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h
index 074a999c7017..0f0f54e35f06 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.h
+++ b/drivers/scsi/qla2xxx/qla_bsg.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 096141148257..c53719a9a747 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index b74e6b5743dc..930414541ec6 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index ee20353c8550..cc5a79259d33 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -1717,6 +1717,14 @@ typedef struct fc_port {
 #define FCS_DEVICE_LOST		3
 #define FCS_ONLINE		4
 
+static const char * const port_state_str[] = {
+	"Unknown",
+	"UNCONFIGURED",
+	"DEAD",
+	"LOST",
+	"ONLINE"
+};
+
 /*
  * FC port flags.
  */
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index 6271353e8c51..a5a4e1275bf2 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index f5ba09c8a663..691783abfb69 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -416,8 +416,7 @@ struct cmd_type_6 {
 	uint8_t vp_index;
 
 	uint32_t fcp_data_dseg_address[2];	/* Data segment address. */
-	uint16_t fcp_data_dseg_len;		/* Data segment length. */
-	uint16_t reserved_1;			/* MUST be set to 0. */
+	uint32_t fcp_data_dseg_len;		/* Data segment length. */
 };
 
 #define COMMAND_TYPE_7	0x18		/* Command Type 7 entry */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index d48326ee3f61..0b381224ae4b 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -39,6 +39,8 @@ extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
 extern int qla2x00_perform_loop_resync(scsi_qla_host_t *);
 extern int qla2x00_loop_resync(scsi_qla_host_t *);
 
+extern int qla2x00_find_new_loop_id(scsi_qla_host_t *, fc_port_t *);
+
 extern int qla2x00_fabric_login(scsi_qla_host_t *, fc_port_t *, uint16_t *);
 extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *);
 
@@ -100,6 +102,8 @@ extern int ql2xgffidenable;
 extern int ql2xenabledif;
 extern int ql2xenablehba_err_chk;
 extern int ql2xtargetreset;
+extern int ql2xdontresethba;
+extern unsigned int ql2xmaxlun;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -319,15 +323,12 @@ extern int
 qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *);
 
 extern int
-qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t);
-
-extern int
-qla2x00_read_edc(scsi_qla_host_t *, uint16_t, uint16_t, dma_addr_t,
-    uint8_t *, uint16_t, uint16_t);
+qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
+	uint16_t, uint16_t, uint16_t, uint16_t);
 
 extern int
-qla2x00_write_edc(scsi_qla_host_t *, uint16_t, uint16_t, dma_addr_t,
-    uint8_t *, uint16_t, uint16_t);
+qla2x00_write_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
+	uint16_t, uint16_t, uint16_t, uint16_t);
 
 extern int
 qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *);
@@ -549,7 +550,6 @@ extern int qla82xx_wr_32(struct qla_hw_data *, ulong, u32);
 extern int qla82xx_rd_32(struct qla_hw_data *, ulong);
 extern int qla82xx_rdmem(struct qla_hw_data *, u64, void *, int);
 extern int qla82xx_wrmem(struct qla_hw_data *, u64, void *, int);
-extern void qla82xx_rom_unlock(struct qla_hw_data *);
 
 /* ISP 8021 IDC */
 extern void qla82xx_clear_drv_active(struct qla_hw_data *);
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 74a91b6dfc68..8cd9066ad906 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 8575808dbae0..920b76bfbb93 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -35,8 +35,6 @@ static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *,
 
 static int qla2x00_restart_isp(scsi_qla_host_t *);
 
-static int qla2x00_find_new_loop_id(scsi_qla_host_t *, fc_port_t *);
-
 static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *);
 static int qla84xx_init_chip(scsi_qla_host_t *);
 static int qla25xx_init_queues(struct qla_hw_data *);
@@ -385,8 +383,18 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 
 	switch (data[0]) {
 	case MBS_COMMAND_COMPLETE:
+		/*
+		 * Driver must validate login state - If PRLI not complete,
+		 * force a relogin attempt via implicit LOGO, PLOGI, and PRLI
+		 * requests.
+		 */
+		rval = qla2x00_get_port_database(vha, fcport, 0);
+		if (rval != QLA_SUCCESS) {
+			qla2x00_post_async_logout_work(vha, fcport, NULL);
+			qla2x00_post_async_login_work(vha, fcport, NULL);
+			break;
+		}
 		if (fcport->flags & FCF_FCP2_DEVICE) {
-			fcport->flags |= FCF_ASYNC_SENT;
 			qla2x00_post_async_adisc_work(vha, fcport, data);
 			break;
 		}
@@ -397,7 +405,7 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 		if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
 			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 		else
-			qla2x00_mark_device_lost(vha, fcport, 1, 1);
+			qla2x00_mark_device_lost(vha, fcport, 1, 0);
 		break;
 	case MBS_PORT_ID_USED:
 		fcport->loop_id = data[1];
@@ -409,7 +417,7 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 		rval = qla2x00_find_new_loop_id(vha, fcport);
 		if (rval != QLA_SUCCESS) {
 			fcport->flags &= ~FCF_ASYNC_SENT;
-			qla2x00_mark_device_lost(vha, fcport, 1, 1);
+			qla2x00_mark_device_lost(vha, fcport, 1, 0);
 			break;
 		}
 		qla2x00_post_async_login_work(vha, fcport, NULL);
@@ -441,7 +449,7 @@ qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 	if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
 		set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 	else
-		qla2x00_mark_device_lost(vha, fcport, 1, 1);
+		qla2x00_mark_device_lost(vha, fcport, 1, 0);
 
 	return;
 }
@@ -2536,7 +2544,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
 	fcport->vp_idx = vha->vp_idx;
 	fcport->port_type = FCT_UNKNOWN;
 	fcport->loop_id = FC_NO_LOOP_ID;
-	atomic_set(&fcport->state, FCS_UNCONFIGURED);
+	qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
 	fcport->supported_classes = FC_COS_UNSPECIFIED;
 
 	return fcport;
@@ -2722,7 +2730,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 			    "loop_id=0x%04x\n",
 			    vha->host_no, fcport->loop_id));
 
-			atomic_set(&fcport->state, FCS_DEVICE_LOST);
+			qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
 		}
 	}
 
@@ -2934,7 +2942,7 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 	qla2x00_iidma_fcport(vha, fcport);
 	qla24xx_update_fcport_fcp_prio(vha, fcport);
 	qla2x00_reg_remote_port(vha, fcport);
-	atomic_set(&fcport->state, FCS_ONLINE);
+	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 }
 
 /*
@@ -3391,7 +3399,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
  * Context:
  *	Kernel context.
  */
-static int
+int
 qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
 {
 	int	rval;
@@ -5202,7 +5210,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 	}
 
 	/* Reset Initialization control block */
-	memset(icb, 0, sizeof(struct init_cb_81xx));
+	memset(icb, 0, ha->init_cb_size);
 
 	/* Copy 1st segment. */
 	dptr1 = (uint8_t *)icb;
@@ -5427,6 +5435,13 @@ qla82xx_restart_isp(scsi_qla_host_t *vha)
 		ha->isp_abort_cnt = 0;
 		clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
 
+		/* Update the firmware version */
+		qla2x00_get_fw_version(vha, &ha->fw_major_version,
+		    &ha->fw_minor_version, &ha->fw_subminor_version,
+		    &ha->fw_attributes, &ha->fw_memory_size,
+		    ha->mpi_version, &ha->mpi_capabilities,
+		    ha->phy_version);
+
 		if (ha->fce) {
 			ha->flags.fce_enabled = 1;
 			memset(ha->fce, 0,
@@ -5508,26 +5523,26 @@ qla81xx_update_fw_options(scsi_qla_host_t *vha)
  *
  * Return:
  *	non-zero (if found)
- * 	0 (if not found)
+ *	-1 (if not found)
  *
  * Context:
  * 	Kernel context
  */
-uint8_t
+static int
 qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
 {
 	int i, entries;
 	uint8_t pid_match, wwn_match;
-	uint8_t priority;
+	int priority;
 	uint32_t pid1, pid2;
 	uint64_t wwn1, wwn2;
 	struct qla_fcp_prio_entry *pri_entry;
 	struct qla_hw_data *ha = vha->hw;
 
 	if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled)
-		return 0;
+		return -1;
 
-	priority = 0;
+	priority = -1;
 	entries = ha->fcp_prio_cfg->num_entries;
 	pri_entry = &ha->fcp_prio_cfg->entry[0];
 
@@ -5610,7 +5625,7 @@ int
 qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
 {
 	int ret;
-	uint8_t priority;
+	int priority;
 	uint16_t mb[5];
 
 	if (fcport->port_type != FCT_TARGET ||
@@ -5618,6 +5633,9 @@ qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
 		return QLA_FUNCTION_FAILED;
 
 	priority = qla24xx_get_fcp_prio(vha, fcport);
+	if (priority < 0)
+		return QLA_FUNCTION_FAILED;
+
 	ret = qla24xx_set_fcp_prio(vha, fcport->loop_id, priority, mb);
 	if (ret == QLA_SUCCESS)
 		fcport->fcp_prio = priority;
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 48f97a92e33d..4c8167e11f69 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -83,3 +83,22 @@ qla2x00_clean_dsd_pool(struct qla_hw_data *ha, srb_t *sp)
 	}
 	INIT_LIST_HEAD(&((struct crc_context *)sp->ctx)->dsd_list);
 }
+
+static inline void
+qla2x00_set_fcport_state(fc_port_t *fcport, int state)
+{
+	int old_state;
+
+	old_state = atomic_read(&fcport->state);
+	atomic_set(&fcport->state, state);
+
+	/* Don't print state transitions during initial allocation of fcport */
+	if (old_state && old_state != state) {
+		DEBUG(qla_printk(KERN_WARNING, fcport->vha->hw,
+		    "scsi(%ld): FCPort state transitioned from %s to %s - "
+		    "portid=%02x%02x%02x.\n", fcport->vha->host_no,
+		    port_state_str[old_state], port_state_str[state],
+		    fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa));
+	}
+}
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index d78d5896fc33..7bac3cd109d6 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 712518d05128..9c0f0e3389eb 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -843,7 +843,10 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
 		qla_printk(KERN_WARNING, ha,
 		    "Invalid SCSI completion handle %d.\n", index);
 
-		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha))
+			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+		else
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		return;
 	}
 
@@ -861,7 +864,10 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
 		qla_printk(KERN_WARNING, ha,
 		    "Invalid ISP SCSI completion handle\n");
 
-		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha))
+			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+		else
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 	}
 }
 
@@ -878,7 +884,10 @@ qla2x00_get_sp_from_handle(scsi_qla_host_t *vha, const char *func,
 	if (index >= MAX_OUTSTANDING_COMMANDS) {
 		qla_printk(KERN_WARNING, ha,
 		    "%s: Invalid completion handle (%x).\n", func, index);
-		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha))
+			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+		else
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		goto done;
 	}
 	sp = req->outstanding_cmds[index];
@@ -1564,7 +1573,10 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		    "scsi(%ld): Invalid status handle (0x%x).\n", vha->host_no,
 		    sts->handle);
 
-		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha))
+			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+		else
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		qla2xxx_wake_dpc(vha);
 		return;
 	}
@@ -1794,12 +1806,13 @@ out:
 	if (logit)
 		DEBUG2(qla_printk(KERN_INFO, ha,
 		    "scsi(%ld:%d:%d) FCP command status: 0x%x-0x%x (0x%x) "
-		    "oxid=0x%x cdb=%02x%02x%02x len=0x%x "
+		    "portid=%02x%02x%02x oxid=0x%x cdb=%02x%02x%02x len=0x%x "
 		    "rsp_info=0x%x resid=0x%x fw_resid=0x%x\n", vha->host_no,
 		    cp->device->id, cp->device->lun, comp_status, scsi_status,
-		    cp->result, ox_id, cp->cmnd[0],
-		    cp->cmnd[1], cp->cmnd[2], scsi_bufflen(cp), rsp_info_len,
-		    resid_len, fw_resid_len));
+		    cp->result, fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa, ox_id, cp->cmnd[0], cp->cmnd[1],
+		    cp->cmnd[2], scsi_bufflen(cp), rsp_info_len, resid_len,
+		    fw_resid_len));
 
 	if (rsp->status_srb == NULL)
 		qla2x00_sp_compl(ha, sp);
@@ -1908,13 +1921,17 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
 		qla2x00_sp_compl(ha, sp);
 
 	} else if (pkt->entry_type == COMMAND_A64_TYPE || pkt->entry_type ==
-	    COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7) {
+		COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7
+		|| pkt->entry_type == COMMAND_TYPE_6) {
 		DEBUG2(printk("scsi(%ld): Error entry - invalid handle\n",
-		    vha->host_no));
+			vha->host_no));
 		qla_printk(KERN_WARNING, ha,
-		    "Error entry - invalid handle\n");
+			"Error entry - invalid handle\n");
 
-		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha))
+			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+		else
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		qla2xxx_wake_dpc(vha);
 	}
 }
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 34893397ac84..c26f0acdfecc 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -1261,11 +1261,12 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
 		/* Check for logged in state. */
 		if (pd24->current_login_state != PDS_PRLI_COMPLETE &&
 		    pd24->last_login_state != PDS_PRLI_COMPLETE) {
-			DEBUG2(printk("%s(%ld): Unable to verify "
-			    "login-state (%x/%x) for loop_id %x\n",
-			    __func__, vha->host_no,
-			    pd24->current_login_state,
-			    pd24->last_login_state, fcport->loop_id));
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			   "scsi(%ld): Unable to verify login-state (%x/%x) "
+			   " - portid=%02x%02x%02x.\n", vha->host_no,
+			   pd24->current_login_state, pd24->last_login_state,
+			   fcport->d_id.b.domain, fcport->d_id.b.area,
+			   fcport->d_id.b.al_pa));
 			rval = QLA_FUNCTION_FAILED;
 			goto gpd_error_out;
 		}
@@ -1289,6 +1290,12 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
 		/* Check for logged in state. */
 		if (pd->master_state != PD_STATE_PORT_LOGGED_IN &&
 		    pd->slave_state != PD_STATE_PORT_LOGGED_IN) {
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			   "scsi(%ld): Unable to verify login-state (%x/%x) "
+			   " - portid=%02x%02x%02x.\n", vha->host_no,
+			   pd->master_state, pd->slave_state,
+			   fcport->d_id.b.domain, fcport->d_id.b.area,
+			   fcport->d_id.b.al_pa));
 			rval = QLA_FUNCTION_FAILED;
 			goto gpd_error_out;
 		}
@@ -1883,7 +1890,8 @@ qla24xx_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 	lg->handle = MAKE_HANDLE(req->id, lg->handle);
 	lg->nport_handle = cpu_to_le16(loop_id);
 	lg->control_flags =
-	    __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO);
+	    __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO|
+		LCF_FREE_NPORT);
 	lg->port_id[0] = al_pa;
 	lg->port_id[1] = area;
 	lg->port_id[2] = domain;
@@ -2362,7 +2370,7 @@ qla24xx_abort_command(srb_t *sp)
 	abt->entry_count = 1;
 	abt->handle = MAKE_HANDLE(req->id, abt->handle);
 	abt->nport_handle = cpu_to_le16(fcport->loop_id);
-	abt->handle_to_abort = handle;
+	abt->handle_to_abort = MAKE_HANDLE(req->id, handle);
 	abt->port_id[0] = fcport->d_id.b.al_pa;
 	abt->port_id[1] = fcport->d_id.b.area;
 	abt->port_id[2] = fcport->d_id.b.domain;
@@ -2779,44 +2787,6 @@ qla2x00_disable_fce_trace(scsi_qla_host_t *vha, uint64_t *wr, uint64_t *rd)
 }
 
 int
-qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint16_t addr,
-    uint16_t off, uint16_t count)
-{
-	int rval;
-	mbx_cmd_t mc;
-	mbx_cmd_t *mcp = &mc;
-
-	if (!IS_FWI2_CAPABLE(vha->hw))
-		return QLA_FUNCTION_FAILED;
-
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
-
-	mcp->mb[0] = MBC_READ_SFP;
-	mcp->mb[1] = addr;
-	mcp->mb[2] = MSW(sfp_dma);
-	mcp->mb[3] = LSW(sfp_dma);
-	mcp->mb[6] = MSW(MSD(sfp_dma));
-	mcp->mb[7] = LSW(MSD(sfp_dma));
-	mcp->mb[8] = count;
-	mcp->mb[9] = off;
-	mcp->mb[10] = 0;
-	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_0;
-	mcp->tov = MBX_TOV_SECONDS;
-	mcp->flags = 0;
-	rval = qla2x00_mailbox_command(vha, mcp);
-
-	if (rval != QLA_SUCCESS) {
-		DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
-		    vha->host_no, rval, mcp->mb[0]));
-	} else {
-		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
-	}
-
-	return rval;
-}
-
-int
 qla2x00_get_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id,
 	uint16_t *port_speed, uint16_t *mb)
 {
@@ -3581,15 +3551,22 @@ qla81xx_restart_mpi_firmware(scsi_qla_host_t *vha)
 }
 
 int
-qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
-    dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt)
+qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
+	uint16_t dev, uint16_t off, uint16_t len, uint16_t opt)
 {
 	int rval;
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_FWI2_CAPABLE(ha))
+		return QLA_FUNCTION_FAILED;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
+	if (len == 1)
+		opt |= BIT_0;
+
 	mcp->mb[0] = MBC_READ_SFP;
 	mcp->mb[1] = dev;
 	mcp->mb[2] = MSW(sfp_dma);
@@ -3597,17 +3574,16 @@ qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 	mcp->mb[6] = MSW(MSD(sfp_dma));
 	mcp->mb[7] = LSW(MSD(sfp_dma));
 	mcp->mb[8] = len;
-	mcp->mb[9] = adr;
+	mcp->mb[9] = off;
 	mcp->mb[10] = opt;
 	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 
 	if (opt & BIT_0)
-		if (sfp)
-			*sfp = mcp->mb[8];
+		*sfp = mcp->mb[1];
 
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
@@ -3620,18 +3596,24 @@ qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 }
 
 int
-qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
-    dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt)
+qla2x00_write_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
+	uint16_t dev, uint16_t off, uint16_t len, uint16_t opt)
 {
 	int rval;
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_FWI2_CAPABLE(ha))
+		return QLA_FUNCTION_FAILED;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
+	if (len == 1)
+		opt |= BIT_0;
+
 	if (opt & BIT_0)
-		if (sfp)
-			len = *sfp;
+		len = *sfp;
 
 	mcp->mb[0] = MBC_WRITE_SFP;
 	mcp->mb[1] = dev;
@@ -3640,10 +3622,10 @@ qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 	mcp->mb[6] = MSW(MSD(sfp_dma));
 	mcp->mb[7] = LSW(MSD(sfp_dma));
 	mcp->mb[8] = len;
-	mcp->mb[9] = adr;
+	mcp->mb[9] = off;
 	mcp->mb[10] = opt;
 	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -4160,63 +4142,32 @@ int
 qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp, uint16_t *frac)
 {
 	int rval;
-	mbx_cmd_t mc;
-	mbx_cmd_t *mcp = &mc;
+	uint8_t byte;
 	struct qla_hw_data *ha = vha->hw;
 
-	DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, ha->host_no));
+	DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no));
 
-	/* High bits. */
-	mcp->mb[0] = MBC_READ_SFP;
-	mcp->mb[1] = 0x98;
-	mcp->mb[2] = 0;
-	mcp->mb[3] = 0;
-	mcp->mb[6] = 0;
-	mcp->mb[7] = 0;
-	mcp->mb[8] = 1;
-	mcp->mb[9] = 0x01;
-	mcp->mb[10] = BIT_13|BIT_0;
-	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_1|MBX_0;
-	mcp->tov = MBX_TOV_SECONDS;
-	mcp->flags = 0;
-	rval = qla2x00_mailbox_command(vha, mcp);
+	/* Integer part */
+	rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x01, 1, BIT_13|BIT_0);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk(KERN_WARNING
-		    "%s(%ld): failed=%x (%x).\n", __func__,
-		    vha->host_no, rval, mcp->mb[0]));
+		    "%s(%ld): failed=%x.\n", __func__, vha->host_no, rval));
 		ha->flags.thermal_supported = 0;
 		goto fail;
 	}
-	*temp = mcp->mb[1] & 0xFF;
+	*temp = byte;
 
-	/* Low bits. */
-	mcp->mb[0] = MBC_READ_SFP;
-	mcp->mb[1] = 0x98;
-	mcp->mb[2] = 0;
-	mcp->mb[3] = 0;
-	mcp->mb[6] = 0;
-	mcp->mb[7] = 0;
-	mcp->mb[8] = 1;
-	mcp->mb[9] = 0x10;
-	mcp->mb[10] = BIT_13|BIT_0;
-	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_1|MBX_0;
-	mcp->tov = MBX_TOV_SECONDS;
-	mcp->flags = 0;
-	rval = qla2x00_mailbox_command(vha, mcp);
+	/* Fraction part */
+	rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x10, 1, BIT_13|BIT_0);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk(KERN_WARNING
-		    "%s(%ld): failed=%x (%x).\n", __func__,
-		    vha->host_no, rval, mcp->mb[0]));
+		    "%s(%ld): failed=%x.\n", __func__, vha->host_no, rval));
 		ha->flags.thermal_supported = 0;
 		goto fail;
 	}
-	*frac = ((mcp->mb[1] & 0xFF) >> 6) * 25;
+	*frac = (byte >> 6) * 25;
 
-	if (rval == QLA_SUCCESS)
-		DEBUG11(printk(KERN_INFO
-		    "%s(%ld): done.\n", __func__, ha->host_no));
+	DEBUG11(printk(KERN_INFO "%s(%ld): done.\n", __func__, vha->host_no));
 fail:
 	return rval;
 }
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 2b69392a71a1..5e343919acad 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -136,7 +136,7 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha)
 		    vha->host_no, fcport->loop_id, fcport->vp_idx));
 
 		qla2x00_mark_device_lost(vha, fcport, 0, 0);
-		atomic_set(&fcport->state, FCS_UNCONFIGURED);
+		qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
 	}
 }
 
@@ -456,7 +456,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	else
 		host->max_cmd_len = MAX_CMDSZ;
 	host->max_channel = MAX_BUSES - 1;
-	host->max_lun = MAX_LUNS;
+	host->max_lun = ql2xmaxlun;
 	host->unique_id = host->host_no;
 	host->max_id = MAX_TARGETS_2200;
 	host->transportt = qla2xxx_transport_vport_template;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 455fe134d31d..e1138bcc834c 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -844,6 +844,12 @@ qla82xx_rom_lock(struct qla_hw_data *ha)
 	return 0;
 }
 
+static void
+qla82xx_rom_unlock(struct qla_hw_data *ha)
+{
+	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+}
+
 static int
 qla82xx_wait_rom_busy(struct qla_hw_data *ha)
 {
@@ -924,7 +930,7 @@ qla82xx_rom_fast_read(struct qla_hw_data *ha, int addr, int *valp)
 		return -1;
 	}
 	ret = qla82xx_do_rom_fast_read(ha, addr, valp);
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 	return ret;
 }
 
@@ -1056,7 +1062,7 @@ qla82xx_write_flash_dword(struct qla_hw_data *ha, uint32_t flashaddr,
 	ret = qla82xx_flash_wait_write_finish(ha);
 
 done_write:
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 	return ret;
 }
 
@@ -1081,12 +1087,26 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 	/* Halt all the indiviual PEGs and other blocks of the ISP */
 	qla82xx_rom_lock(ha);
 
-	/* mask all niu interrupts */
+	/* disable all I2Q */
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x10, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x14, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x18, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x1c, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x20, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x24, 0x0);
+
+	/* disable all niu interrupts */
 	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x40, 0xff);
 	/* disable xge rx/tx */
 	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x70000, 0x00);
 	/* disable xg1 rx/tx */
 	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x80000, 0x00);
+	/* disable sideband mac */
+	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x90000, 0x00);
+	/* disable ap0 mac */
+	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0xa0000, 0x00);
+	/* disable ap1 mac */
+	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0xb0000, 0x00);
 
 	/* halt sre */
 	val = qla82xx_rd_32(ha, QLA82XX_CRB_SRE + 0x1000);
@@ -1101,6 +1121,7 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x10, 0x0);
 	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x18, 0x0);
 	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x100, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x200, 0x0);
 
 	/* halt pegs */
 	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x3c, 1);
@@ -1108,9 +1129,9 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_2 + 0x3c, 1);
 	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_3 + 0x3c, 1);
 	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c, 1);
+	msleep(20);
 
 	/* big hammer */
-	msleep(1000);
 	if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
 		/* don't reset CAM block on reset */
 		qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff);
@@ -1129,7 +1150,7 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 	qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
 	msleep(20);
 
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 
 	/* Read the signature value from the flash.
 	 * Offset 0: Contain signature (0xcafecafe)
@@ -2395,9 +2416,13 @@ qla82xx_load_fw(scsi_qla_host_t *vha)
 
 	if (qla82xx_fw_load_from_flash(ha) == QLA_SUCCESS) {
 		qla_printk(KERN_ERR, ha,
-			"Firmware loaded successfully from flash\n");
+		    "Firmware loaded successfully from flash\n");
 		return QLA_SUCCESS;
+	} else {
+		qla_printk(KERN_ERR, ha,
+		    "Firmware load from flash failed\n");
 	}
+
 try_blob_fw:
 	qla_printk(KERN_INFO, ha,
 	    "Attempting to load firmware from blob\n");
@@ -2548,11 +2573,11 @@ qla2xx_build_scsi_type_6_iocbs(srb_t *sp, struct cmd_type_6 *cmd_pkt,
 			dsd_seg = (uint32_t *)&cmd_pkt->fcp_data_dseg_address;
 			*dsd_seg++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
 			*dsd_seg++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
-			cmd_pkt->fcp_data_dseg_len = dsd_list_len;
+			*dsd_seg++ = cpu_to_le32(dsd_list_len);
 		} else {
 			*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
 			*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
-			*cur_dsd++ = dsd_list_len;
+			*cur_dsd++ = cpu_to_le32(dsd_list_len);
 		}
 		cur_dsd = (uint32_t *)next_dsd;
 		while (avail_dsds) {
@@ -2991,7 +3016,7 @@ qla82xx_unprotect_flash(struct qla_hw_data *ha)
 		qla_printk(KERN_WARNING, ha, "Write disable failed\n");
 
 done_unprotect:
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 	return ret;
 }
 
@@ -3020,7 +3045,7 @@ qla82xx_protect_flash(struct qla_hw_data *ha)
 	if (qla82xx_write_disable_flash(ha) != 0)
 		qla_printk(KERN_WARNING, ha, "Write disable failed\n");
 done_protect:
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 	return ret;
 }
 
@@ -3048,7 +3073,7 @@ qla82xx_erase_sector(struct qla_hw_data *ha, int addr)
 	}
 	ret = qla82xx_flash_wait_write_finish(ha);
 done:
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 	return ret;
 }
 
@@ -3228,7 +3253,7 @@ void qla82xx_rom_lock_recovery(struct qla_hw_data *ha)
 	 * else died while holding it.
 	 * In either case, unlock.
 	 */
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 }
 
 /*
@@ -3528,15 +3553,18 @@ int
 qla82xx_device_state_handler(scsi_qla_host_t *vha)
 {
 	uint32_t dev_state;
+	uint32_t old_dev_state;
 	int rval = QLA_SUCCESS;
 	unsigned long dev_init_timeout;
 	struct qla_hw_data *ha = vha->hw;
+	int loopcount = 0;
 
 	qla82xx_idc_lock(ha);
 	if (!vha->flags.init_done)
 		qla82xx_set_drv_active(vha);
 
 	dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+	old_dev_state = dev_state;
 	qla_printk(KERN_INFO, ha, "1:Device state is 0x%x = %s\n", dev_state,
 		dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown");
 
@@ -3553,10 +3581,16 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 			break;
 		}
 		dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
-		qla_printk(KERN_INFO, ha,
-			"2:Device state is 0x%x = %s\n", dev_state,
-			dev_state < MAX_STATES ?
-			qdev_state[dev_state] : "Unknown");
+		if (old_dev_state != dev_state) {
+			loopcount = 0;
+			old_dev_state = dev_state;
+		}
+		if (loopcount < 5) {
+			qla_printk(KERN_INFO, ha,
+			    "2:Device state is 0x%x = %s\n", dev_state,
+			    dev_state < MAX_STATES ?
+			    qdev_state[dev_state] : "Unknown");
+		}
 
 		switch (dev_state) {
 		case QLA82XX_DEV_READY:
@@ -3570,6 +3604,7 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 			qla82xx_idc_lock(ha);
 			break;
 		case QLA82XX_DEV_NEED_RESET:
+		    if (!ql2xdontresethba)
 			qla82xx_need_reset_handler(vha);
 			dev_init_timeout = jiffies +
 				(ha->nx_dev_init_timeout * HZ);
@@ -3604,6 +3639,7 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 			msleep(1000);
 			qla82xx_idc_lock(ha);
 		}
+		loopcount++;
 	}
 exit:
 	qla82xx_idc_unlock(ha);
@@ -3621,7 +3657,8 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 		if (dev_state == QLA82XX_DEV_NEED_RESET &&
 		    !test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) {
 			qla_printk(KERN_WARNING, ha,
-			    "%s(): Adapter reset needed!\n", __func__);
+			    "scsi(%ld) %s: Adapter reset needed!\n",
+				vha->host_no, __func__);
 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 			qla2xxx_wake_dpc(vha);
 		} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
@@ -3632,10 +3669,27 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 			set_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags);
 			qla2xxx_wake_dpc(vha);
 		} else {
-			qla82xx_check_fw_alive(vha);
 			if (qla82xx_check_fw_alive(vha)) {
 				halt_status = qla82xx_rd_32(ha,
 				    QLA82XX_PEG_HALT_STATUS1);
+				qla_printk(KERN_INFO, ha,
+				    "scsi(%ld): %s, Dumping hw/fw registers:\n "
+				    " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,\n "
+				    " PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,\n "
+				    " PEG_NET_2_PC: 0x%x, PEG_NET_3_PC: 0x%x,\n "
+				    " PEG_NET_4_PC: 0x%x\n",
+				    vha->host_no, __func__, halt_status,
+				    qla82xx_rd_32(ha, QLA82XX_PEG_HALT_STATUS2),
+				    qla82xx_rd_32(ha,
+					    QLA82XX_CRB_PEG_NET_0 + 0x3c),
+				    qla82xx_rd_32(ha,
+					    QLA82XX_CRB_PEG_NET_1 + 0x3c),
+				    qla82xx_rd_32(ha,
+					    QLA82XX_CRB_PEG_NET_2 + 0x3c),
+				    qla82xx_rd_32(ha,
+					    QLA82XX_CRB_PEG_NET_3 + 0x3c),
+				    qla82xx_rd_32(ha,
+					    QLA82XX_CRB_PEG_NET_4 + 0x3c));
 				if (halt_status & HALT_STATUS_UNRECOVERABLE) {
 					set_bit(ISP_UNRECOVERABLE,
 					    &vha->dpc_flags);
@@ -3651,8 +3705,9 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 				if (ha->flags.mbox_busy) {
 					ha->flags.mbox_int = 1;
 					DEBUG2(qla_printk(KERN_ERR, ha,
-					    "Due to fw hung, doing premature "
-					    "completion of mbx command\n"));
+					    "scsi(%ld) Due to fw hung, doing "
+					    "premature completion of mbx "
+					    "command\n", vha->host_no));
 					if (test_bit(MBX_INTR_WAIT,
 					    &ha->mbx_cmd_flags))
 						complete(&ha->mbx_intr_comp);
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index ed5883f1778a..8a21832c6693 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index aa7747529165..f461925a9dfc 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -164,6 +164,20 @@ module_param(ql2xasynctmfenable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xasynctmfenable,
 		"Enables issue of TM IOCBs asynchronously via IOCB mechanism"
 		"Default is 0 - Issue TM IOCBs via mailbox mechanism.");
+
+int ql2xdontresethba;
+module_param(ql2xdontresethba, int, S_IRUGO);
+MODULE_PARM_DESC(ql2xdontresethba,
+	"Option to specify reset behaviour\n"
+	" 0 (Default) -- Reset on failure.\n"
+	" 1 -- Do not reset on failure.\n");
+
+uint ql2xmaxlun = MAX_LUNS;
+module_param(ql2xmaxlun, uint, S_IRUGO);
+MODULE_PARM_DESC(ql2xmaxlun,
+		"Defines the maximum LU number to register with the SCSI "
+		"midlayer. Default is 65535.");
+
 /*
  * SCSI host template entry points
  */
@@ -528,7 +542,7 @@ qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
 static int
 qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 {
-	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+	scsi_qla_host_t *vha = shost_priv(host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 	struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
 	struct qla_hw_data *ha = vha->hw;
@@ -2128,7 +2142,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	else
 		host->max_cmd_len = MAX_CMDSZ;
 	host->max_channel = MAX_BUSES - 1;
-	host->max_lun = MAX_LUNS;
+	host->max_lun = ql2xmaxlun;
 	host->transportt = qla2xxx_transport_template;
 	sht->vendor_id = (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC);
 
@@ -2360,21 +2374,26 @@ qla2x00_remove_one(struct pci_dev *pdev)
 	base_vha = pci_get_drvdata(pdev);
 	ha = base_vha->hw;
 
-	spin_lock_irqsave(&ha->vport_slock, flags);
-	list_for_each_entry(vha, &ha->vp_list, list) {
-		atomic_inc(&vha->vref_count);
+	mutex_lock(&ha->vport_lock);
+	while (ha->cur_vport_count) {
+		struct Scsi_Host *scsi_host;
 
-		if (vha->fc_vport) {
-			spin_unlock_irqrestore(&ha->vport_slock, flags);
+		spin_lock_irqsave(&ha->vport_slock, flags);
 
-			fc_vport_terminate(vha->fc_vport);
+		BUG_ON(base_vha->list.next == &ha->vp_list);
+		/* This assumes first entry in ha->vp_list is always base vha */
+		vha = list_first_entry(&base_vha->list, scsi_qla_host_t, list);
+		scsi_host = scsi_host_get(vha->host);
 
-			spin_lock_irqsave(&ha->vport_slock, flags);
-		}
+		spin_unlock_irqrestore(&ha->vport_slock, flags);
+		mutex_unlock(&ha->vport_lock);
+
+		fc_vport_terminate(vha->fc_vport);
+		scsi_host_put(vha->host);
 
-		atomic_dec(&vha->vref_count);
+		mutex_lock(&ha->vport_lock);
 	}
-	spin_unlock_irqrestore(&ha->vport_slock, flags);
+	mutex_unlock(&ha->vport_lock);
 
 	set_bit(UNLOADING, &base_vha->dpc_flags);
 
@@ -2544,7 +2563,7 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *vha, fc_port_t *fcport,
 {
 	if (atomic_read(&fcport->state) == FCS_ONLINE &&
 	    vha->vp_idx == fcport->vp_idx) {
-		atomic_set(&fcport->state, FCS_DEVICE_LOST);
+		qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
 		qla2x00_schedule_rport_del(vha, fcport, defer);
 	}
 	/*
@@ -2552,7 +2571,7 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *vha, fc_port_t *fcport,
 	 * port but do the retries.
 	 */
 	if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
-		atomic_set(&fcport->state, FCS_DEVICE_LOST);
+		qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
 
 	if (!do_login)
 		return;
@@ -2607,7 +2626,7 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha, int defer)
 		if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
 			continue;
 		if (atomic_read(&fcport->state) == FCS_ONLINE) {
-			atomic_set(&fcport->state, FCS_DEVICE_LOST);
+			qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
 			if (defer)
 				qla2x00_schedule_rport_del(vha, fcport, defer);
 			else if (vha->vp_idx == fcport->vp_idx)
@@ -3214,6 +3233,17 @@ void qla2x00_relogin(struct scsi_qla_host *vha)
 							fcport->d_id.b.area,
 							fcport->d_id.b.al_pa);
 
+				if (fcport->loop_id == FC_NO_LOOP_ID) {
+					fcport->loop_id = next_loopid =
+					    ha->min_external_loopid;
+					status = qla2x00_find_new_loop_id(
+					    vha, fcport);
+					if (status != QLA_SUCCESS) {
+						/* Ran out of IDs to use */
+						break;
+					}
+				}
+
 				if (IS_ALOGIO_CAPABLE(ha)) {
 					fcport->flags |= FCF_ASYNC_SENT;
 					data[0] = 0;
@@ -3604,7 +3634,8 @@ qla2x00_timer(scsi_qla_host_t *vha)
 	if (!pci_channel_offline(ha->pdev))
 		pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
 
-	if (IS_QLA82XX(ha)) {
+	/* Make sure qla82xx_watchdog is run only for physical port */
+	if (!vha->vp_idx && IS_QLA82XX(ha)) {
 		if (test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags))
 			start_dpc++;
 		qla82xx_watchdog(vha);
@@ -3612,7 +3643,8 @@ qla2x00_timer(scsi_qla_host_t *vha)
 
 	/* Loop down handler. */
 	if (atomic_read(&vha->loop_down_timer) > 0 &&
-	    !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
+	    !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) &&
+	    !(test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags))
 		&& vha->flags.online) {
 
 		if (atomic_read(&vha->loop_down_timer) ==
@@ -3648,7 +3680,11 @@ qla2x00_timer(scsi_qla_host_t *vha)
 					if (!(sfcp->flags & FCF_FCP2_DEVICE))
 						continue;
 
-					set_bit(ISP_ABORT_NEEDED,
+					if (IS_QLA82XX(ha))
+						set_bit(FCOE_CTX_RESET_NEEDED,
+							&vha->dpc_flags);
+					else
+						set_bit(ISP_ABORT_NEEDED,
 							&vha->dpc_flags);
 					break;
 				}
@@ -3667,7 +3703,12 @@ qla2x00_timer(scsi_qla_host_t *vha)
 				qla_printk(KERN_WARNING, ha,
 				    "Loop down - aborting ISP.\n");
 
-				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+				if (IS_QLA82XX(ha))
+					set_bit(FCOE_CTX_RESET_NEEDED,
+						&vha->dpc_flags);
+				else
+					set_bit(ISP_ABORT_NEEDED,
+						&vha->dpc_flags);
 			}
 		}
 		DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
@@ -3675,8 +3716,8 @@ qla2x00_timer(scsi_qla_host_t *vha)
 		    atomic_read(&vha->loop_down_timer)));
 	}
 
-	/* Check if beacon LED needs to be blinked */
-	if (ha->beacon_blink_led == 1) {
+	/* Check if beacon LED needs to be blinked for physical host only */
+	if (!vha->vp_idx && (ha->beacon_blink_led == 1)) {
 		set_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags);
 		start_dpc++;
 	}
diff --git a/drivers/scsi/qla2xxx/qla_settings.h b/drivers/scsi/qla2xxx/qla_settings.h
index f0b2b9986a55..d70f03008981 100644
--- a/drivers/scsi/qla2xxx/qla_settings.h
+++ b/drivers/scsi/qla2xxx/qla_settings.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 22070621206c..693647661ed1 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 3a260c3f055a..062c97bf62f5 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -1,15 +1,15 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.07.00"
+#define QLA2XXX_VERSION      "8.03.07.03-k"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
 #define QLA_DRIVER_PATCH_VER	7
-#define QLA_DRIVER_BETA_VER	0
+#define QLA_DRIVER_BETA_VER	3