summaryrefslogtreecommitdiffstats
path: root/drivers/thermal/imx_thermal.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal/imx_thermal.c')
-rw-r--r--drivers/thermal/imx_thermal.c45
1 files changed, 29 insertions, 16 deletions
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 461bf3d033a0..5a1f1070b702 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -459,6 +459,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
int measure_freq;
int ret;
+ if (!cpufreq_get_current_driver()) {
+ dev_dbg(&pdev->dev, "no cpufreq driver!");
+ return -EPROBE_DEFER;
+ }
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -521,6 +525,30 @@ static int imx_thermal_probe(struct platform_device *pdev)
return ret;
}
+ data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->thermal_clk)) {
+ ret = PTR_ERR(data->thermal_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to get thermal clk: %d\n", ret);
+ cpufreq_cooling_unregister(data->cdev);
+ return ret;
+ }
+
+ /*
+ * Thermal sensor needs clk on to get correct value, normally
+ * we should enable its clk before taking measurement and disable
+ * clk after measurement is done, but if alarm function is enabled,
+ * hardware will auto measure the temperature periodically, so we
+ * need to keep the clk always on for alarm function.
+ */
+ ret = clk_prepare_enable(data->thermal_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
+ cpufreq_cooling_unregister(data->cdev);
+ return ret;
+ }
+
data->tz = thermal_zone_device_register("imx_thermal_zone",
IMX_TRIP_NUM,
BIT(IMX_TRIP_PASSIVE), data,
@@ -531,26 +559,11 @@ static int imx_thermal_probe(struct platform_device *pdev)
ret = PTR_ERR(data->tz);
dev_err(&pdev->dev,
"failed to register thermal zone device %d\n", ret);
+ clk_disable_unprepare(data->thermal_clk);
cpufreq_cooling_unregister(data->cdev);
return ret;
}
- data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(data->thermal_clk)) {
- dev_warn(&pdev->dev, "failed to get thermal clk!\n");
- } else {
- /*
- * Thermal sensor needs clk on to get correct value, normally
- * we should enable its clk before taking measurement and disable
- * clk after measurement is done, but if alarm function is enabled,
- * hardware will auto measure the temperature periodically, so we
- * need to keep the clk always on for alarm function.
- */
- ret = clk_prepare_enable(data->thermal_clk);
- if (ret)
- dev_warn(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
- }
-
/* Enable measurements at ~ 10 Hz */
regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */