diff options
Diffstat (limited to 'drivers/usb/dwc3/core.h')
| -rw-r--r-- | drivers/usb/dwc3/core.h | 21 |
1 files changed, 13 insertions, 8 deletions
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4743e918dcaf..d56457c02996 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -263,6 +263,7 @@ #define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK BIT(26) #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) #define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) +#define DWC3_GUCTL1_PARKMODE_DISABLE_HS BIT(16) #define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST BIT(10) /* Global Status Register */ @@ -280,6 +281,7 @@ /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST BIT(31) #define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS BIT(30) +#define DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV BIT(17) #define DWC3_GUSB2PHYCFG_SUSPHY BIT(6) #define DWC3_GUSB2PHYCFG_ULPI_UTMI BIT(4) #define DWC3_GUSB2PHYCFG_ENBLSLPM BIT(8) @@ -526,6 +528,7 @@ #define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c #define DWC3_DGCMD_SET_ENDPOINT_PRIME 0x0d #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10 +#define DWC3_DGCMD_DEV_NOTIFICATION 0x07 #define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F) #define DWC3_DGCMD_CMDACT BIT(10) @@ -538,6 +541,8 @@ #define DWC3_DGCMDPAR_TX_FIFO BIT(5) #define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0) #define DWC3_DGCMDPAR_LOOPBACK_ENA BIT(0) +#define DWC3_DGCMDPAR_DN_FUNC_WAKE BIT(0) +#define DWC3_DGCMDPAR_INTF_SEL(n) ((n) << 4) /* Device Endpoint Command Register */ #define DWC3_DEPCMD_PARAM_SHIFT 16 @@ -969,12 +974,10 @@ struct dwc3_scratchpad_array { * @drd_work: workqueue used for role swapping * @ep0_trb: trb which is used for the ctrl_req * @bounce: address of bounce buffer - * @scratchbuf: address of scratch buffer * @setup_buf: used while precessing STD USB requests * @ep0_trb_addr: dma address of @ep0_trb * @bounce_addr: dma address of @bounce * @ep0_usb_req: dummy req used while handling STD USB requests - * @scratch_addr: dma address of scratchbuf * @ep0_in_setup: one control transfer is completed and enter setup phase * @lock: for synchronizing * @mutex: for mode switching @@ -999,7 +1002,6 @@ struct dwc3_scratchpad_array { * @current_otg_role: current role of operation while using the OTG block * @desired_otg_role: desired role of operation while using the OTG block * @otg_restart_host: flag that OTG controller needs to restart host - * @nr_scratch: number of scratch buffers * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) * @max_ssp_rate: SuperSpeed Plus maximum signaling rate and lane count @@ -1056,7 +1058,6 @@ struct dwc3_scratchpad_array { * @delayed_status: true when gadget driver asks for delayed status * @ep0_bounced: true when we used bounce buffer * @ep0_expect_in: true when we expect a DATA IN transfer - * @has_hibernation: true when dwc3 was configured with Hibernation * @sysdev_is_parent: true when dwc3 device has a parent driver * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that * there's now way for software to detect this in runtime. @@ -1100,8 +1101,12 @@ struct dwc3_scratchpad_array { * check during HS transmit. * @resume_hs_terminations: Set if we enable quirk for fixing improper crc * generation after resume from suspend. + * @ulpi_ext_vbus_drv: Set to confiure the upli chip to drives CPEN pin + * VBUS with an external supply. * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed * instances in park mode. + * @parkmode_disable_hs_quirk: set if we need to disable all HishSpeed + * instances in park mode. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis @@ -1110,6 +1115,7 @@ struct dwc3_scratchpad_array { * 3 - Reserved * @dis_metastability_quirk: set to disable metastability quirk. * @dis_split_quirk: set to disable split boundary. + * @wakeup_configured: set if the device is configured for remote wakeup. * @imod_interval: set the interrupt moderation interval in 250ns * increments or 0 to disable. * @max_cfg_eps: current max number of IN eps used across all USB configs. @@ -1123,11 +1129,9 @@ struct dwc3 { struct work_struct drd_work; struct dwc3_trb *ep0_trb; void *bounce; - void *scratchbuf; u8 *setup_buf; dma_addr_t ep0_trb_addr; dma_addr_t bounce_addr; - dma_addr_t scratch_addr; struct dwc3_request ep0_usb_req; struct completion ep0_in_setup; @@ -1187,7 +1191,6 @@ struct dwc3 { u32 current_otg_role; u32 desired_otg_role; bool otg_restart_host; - u32 nr_scratch; u32 u1u2; u32 maximum_speed; u32 gadget_max_speed; @@ -1284,7 +1287,6 @@ struct dwc3 { unsigned delayed_status:1; unsigned ep0_bounced:1; unsigned ep0_expect_in:1; - unsigned has_hibernation:1; unsigned sysdev_is_parent:1; unsigned has_lpm_erratum:1; unsigned is_utmi_l1_suspend:1; @@ -1317,7 +1319,9 @@ struct dwc3 { unsigned dis_del_phy_power_chg_quirk:1; unsigned dis_tx_ipgap_linecheck_quirk:1; unsigned resume_hs_terminations:1; + unsigned ulpi_ext_vbus_drv:1; unsigned parkmode_disable_ss_quirk:1; + unsigned parkmode_disable_hs_quirk:1; unsigned gfladj_refclk_lpm_sel:1; unsigned tx_de_emphasis_quirk:1; @@ -1327,6 +1331,7 @@ struct dwc3 { unsigned dis_split_quirk:1; unsigned async_callbacks:1; + unsigned wakeup_configured:1; u16 imod_interval; |