summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_ethtool.c281
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c10
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_type.h3
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_type.h3
4 files changed, 173 insertions, 124 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 8e69caf01efe..5854460a34ff 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1,7 +1,7 @@
/*******************************************************************************
*
* Intel Ethernet Controller XL710 Family Linux Driver
- * Copyright(c) 2013 - 2014 Intel Corporation.
+ * Copyright(c) 2013 - 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -228,73 +228,20 @@ static void i40e_partition_setting_complaint(struct i40e_pf *pf)
}
/**
- * i40e_get_settings - Get Link Speed and Duplex settings
+ * i40e_get_settings_link_up - Get the Link settings for when link is up
+ * @hw: hw structure
+ * @ecmd: ethtool command to fill in
* @netdev: network interface device structure
- * @ecmd: ethtool command
*
- * Reports speed/duplex settings based on media_type
**/
-static int i40e_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static void i40e_get_settings_link_up(struct i40e_hw *hw,
+ struct ethtool_cmd *ecmd,
+ struct net_device *netdev)
{
- struct i40e_netdev_priv *np = netdev_priv(netdev);
- struct i40e_pf *pf = np->vsi->back;
- struct i40e_hw *hw = &pf->hw;
struct i40e_link_status *hw_link_info = &hw->phy.link_info;
- bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
u32 link_speed = hw_link_info->link_speed;
- /* hardware is either in 40G mode or 10G mode
- * NOTE: this section initializes supported and advertising
- */
- if (!link_up) {
- /* link is down and the driver needs to fall back on
- * device ID to determine what kinds of info to display,
- * it's mostly a guess that may change when link is up
- */
- switch (hw->device_id) {
- case I40E_DEV_ID_QSFP_A:
- case I40E_DEV_ID_QSFP_B:
- case I40E_DEV_ID_QSFP_C:
- /* pluggable QSFP */
- ecmd->supported = SUPPORTED_40000baseSR4_Full |
- SUPPORTED_40000baseCR4_Full |
- SUPPORTED_40000baseLR4_Full;
- ecmd->advertising = ADVERTISED_40000baseSR4_Full |
- ADVERTISED_40000baseCR4_Full |
- ADVERTISED_40000baseLR4_Full;
- break;
- case I40E_DEV_ID_KX_B:
- /* backplane 40G */
- ecmd->supported = SUPPORTED_40000baseKR4_Full;
- ecmd->advertising = ADVERTISED_40000baseKR4_Full;
- break;
- case I40E_DEV_ID_KX_C:
- /* backplane 10G */
- ecmd->supported = SUPPORTED_10000baseKR_Full;
- ecmd->advertising = ADVERTISED_10000baseKR_Full;
- break;
- case I40E_DEV_ID_10G_BASE_T:
- ecmd->supported = SUPPORTED_10000baseT_Full |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_100baseT_Full;
- ecmd->advertising = ADVERTISED_10000baseT_Full |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_100baseT_Full;
- break;
- default:
- /* all the rest are 10G/1G */
- ecmd->supported = SUPPORTED_10000baseT_Full |
- SUPPORTED_1000baseT_Full;
- ecmd->advertising = ADVERTISED_10000baseT_Full |
- ADVERTISED_1000baseT_Full;
- break;
- }
-
- /* skip phy_type use as it is zero when link is down */
- goto no_valid_phy_type;
- }
-
+ /* Initialize supported and advertised settings based on phy settings */
switch (hw_link_info->phy_type) {
case I40E_PHY_TYPE_40GBASE_CR4:
case I40E_PHY_TYPE_40GBASE_CR4_CU:
@@ -303,6 +250,10 @@ static int i40e_get_settings(struct net_device *netdev,
ecmd->advertising = ADVERTISED_Autoneg |
ADVERTISED_40000baseCR4_Full;
break;
+ case I40E_PHY_TYPE_XLAUI:
+ case I40E_PHY_TYPE_XLPPI:
+ ecmd->supported = SUPPORTED_40000baseCR4_Full;
+ break;
case I40E_PHY_TYPE_40GBASE_KR4:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_40000baseKR4_Full;
@@ -310,8 +261,6 @@ static int i40e_get_settings(struct net_device *netdev,
ADVERTISED_40000baseKR4_Full;
break;
case I40E_PHY_TYPE_40GBASE_SR4:
- case I40E_PHY_TYPE_XLPPI:
- case I40E_PHY_TYPE_XLAUI:
ecmd->supported = SUPPORTED_40000baseSR4_Full;
break;
case I40E_PHY_TYPE_40GBASE_LR4:
@@ -333,20 +282,40 @@ static int i40e_get_settings(struct net_device *netdev,
case I40E_PHY_TYPE_10GBASE_LR:
case I40E_PHY_TYPE_1000BASE_SX:
case I40E_PHY_TYPE_1000BASE_LX:
- ecmd->supported = SUPPORTED_10000baseT_Full;
- ecmd->supported |= SUPPORTED_1000baseT_Full;
+ ecmd->supported = SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full;
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
+ ecmd->advertising |= ADVERTISED_10000baseT_Full;
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
+ ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ break;
+ case I40E_PHY_TYPE_1000BASE_KX:
+ ecmd->supported = SUPPORTED_Autoneg |
+ SUPPORTED_1000baseKX_Full;
+ ecmd->advertising = ADVERTISED_Autoneg |
+ ADVERTISED_1000baseKX_Full;
break;
- case I40E_PHY_TYPE_10GBASE_CR1_CU:
- case I40E_PHY_TYPE_10GBASE_CR1:
case I40E_PHY_TYPE_10GBASE_T:
+ case I40E_PHY_TYPE_1000BASE_T:
+ case I40E_PHY_TYPE_100BASE_TX:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full;
+ ecmd->advertising = ADVERTISED_Autoneg;
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
+ ecmd->advertising |= ADVERTISED_10000baseT_Full;
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
+ ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+ break;
+ case I40E_PHY_TYPE_10GBASE_CR1_CU:
+ case I40E_PHY_TYPE_10GBASE_CR1:
+ ecmd->supported = SUPPORTED_Autoneg |
+ SUPPORTED_10000baseT_Full;
ecmd->advertising = ADVERTISED_Autoneg |
- ADVERTISED_10000baseT_Full |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_100baseT_Full;
+ ADVERTISED_10000baseT_Full;
break;
case I40E_PHY_TYPE_XAUI:
case I40E_PHY_TYPE_XFI:
@@ -354,34 +323,14 @@ static int i40e_get_settings(struct net_device *netdev,
case I40E_PHY_TYPE_10GBASE_SFPP_CU:
ecmd->supported = SUPPORTED_10000baseT_Full;
break;
- case I40E_PHY_TYPE_1000BASE_KX:
- case I40E_PHY_TYPE_1000BASE_T:
- ecmd->supported = SUPPORTED_Autoneg |
- SUPPORTED_10000baseT_Full |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_100baseT_Full;
- ecmd->advertising = ADVERTISED_Autoneg |
- ADVERTISED_10000baseT_Full |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_100baseT_Full;
- break;
- case I40E_PHY_TYPE_100BASE_TX:
- ecmd->supported = SUPPORTED_Autoneg |
- SUPPORTED_10000baseT_Full |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_100baseT_Full;
- ecmd->advertising = ADVERTISED_Autoneg |
- ADVERTISED_10000baseT_Full |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_100baseT_Full;
- break;
case I40E_PHY_TYPE_SGMII:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full;
- ecmd->advertising = ADVERTISED_Autoneg |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_100baseT_Full;
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
+ ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
break;
default:
/* if we got here and link is up something bad is afoot */
@@ -389,8 +338,118 @@ static int i40e_get_settings(struct net_device *netdev,
hw_link_info->phy_type);
}
-no_valid_phy_type:
- /* this is if autoneg is enabled or disabled */
+ /* Set speed and duplex */
+ switch (link_speed) {
+ case I40E_LINK_SPEED_40GB:
+ /* need a SPEED_40000 in ethtool.h */
+ ethtool_cmd_speed_set(ecmd, 40000);
+ break;
+ case I40E_LINK_SPEED_10GB:
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ break;
+ case I40E_LINK_SPEED_1GB:
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ break;
+ case I40E_LINK_SPEED_100MB:
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
+ break;
+ default:
+ break;
+ }
+ ecmd->duplex = DUPLEX_FULL;
+}
+
+/**
+ * i40e_get_settings_link_down - Get the Link settings for when link is down
+ * @hw: hw structure
+ * @ecmd: ethtool command to fill in
+ *
+ * Reports link settings that can be determined when link is down
+ **/
+static void i40e_get_settings_link_down(struct i40e_hw *hw,
+ struct ethtool_cmd *ecmd)
+{
+ struct i40e_link_status *hw_link_info = &hw->phy.link_info;
+
+ /* link is down and the driver needs to fall back on
+ * device ID to determine what kinds of info to display,
+ * it's mostly a guess that may change when link is up
+ */
+ switch (hw->device_id) {
+ case I40E_DEV_ID_QSFP_A:
+ case I40E_DEV_ID_QSFP_B:
+ case I40E_DEV_ID_QSFP_C:
+ /* pluggable QSFP */
+ ecmd->supported = SUPPORTED_40000baseSR4_Full |
+ SUPPORTED_40000baseCR4_Full |
+ SUPPORTED_40000baseLR4_Full;
+ ecmd->advertising = ADVERTISED_40000baseSR4_Full |
+ ADVERTISED_40000baseCR4_Full |
+ ADVERTISED_40000baseLR4_Full;
+ break;
+ case I40E_DEV_ID_KX_B:
+ /* backplane 40G */
+ ecmd->supported = SUPPORTED_40000baseKR4_Full;
+ ecmd->advertising = ADVERTISED_40000baseKR4_Full;
+ break;
+ case I40E_DEV_ID_KX_C:
+ /* backplane 10G */
+ ecmd->supported = SUPPORTED_10000baseKR_Full;
+ ecmd->advertising = ADVERTISED_10000baseKR_Full;
+ break;
+ case I40E_DEV_ID_10G_BASE_T:
+ ecmd->supported = SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_100baseT_Full;
+ /* Figure out what has been requested */
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
+ ecmd->advertising |= ADVERTISED_10000baseT_Full;
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
+ ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+ break;
+ default:
+ /* all the rest are 10G/1G */
+ ecmd->supported = SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full;
+ /* Figure out what has been requested */
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
+ ecmd->advertising |= ADVERTISED_10000baseT_Full;
+ if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
+ ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ break;
+ }
+
+ /* With no link speed and duplex are unknown */
+ ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
+ ecmd->duplex = DUPLEX_UNKNOWN;
+}
+
+/**
+ * i40e_get_settings - Get Link Speed and Duplex settings
+ * @netdev: network interface device structure
+ * @ecmd: ethtool command
+ *
+ * Reports speed/duplex settings based on media_type
+ **/
+static int i40e_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+ struct i40e_hw *hw = &pf->hw;
+ struct i40e_link_status *hw_link_info = &hw->phy.link_info;
+ bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
+
+ if (link_up)
+ i40e_get_settings_link_up(hw, ecmd, netdev);
+ else
+ i40e_get_settings_link_down(hw, ecmd);
+
+ /* Now set the settings that don't rely on link being up/down */
+
+ /* Set autoneg settings */
ecmd->autoneg = ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
AUTONEG_ENABLE : AUTONEG_DISABLE);
@@ -423,11 +482,13 @@ no_valid_phy_type:
break;
}
+ /* Set transceiver */
ecmd->transceiver = XCVR_EXTERNAL;
+ /* Set flow control settings */
ecmd->supported |= SUPPORTED_Pause;
- switch (hw->fc.current_mode) {
+ switch (hw->fc.requested_mode) {
case I40E_FC_FULL:
ecmd->advertising |= ADVERTISED_Pause;
break;
@@ -444,30 +505,6 @@ no_valid_phy_type:
break;
}
- if (link_up) {
- switch (link_speed) {
- case I40E_LINK_SPEED_40GB:
- /* need a SPEED_40000 in ethtool.h */
- ethtool_cmd_speed_set(ecmd, 40000);
- break;
- case I40E_LINK_SPEED_10GB:
- ethtool_cmd_speed_set(ecmd, SPEED_10000);
- break;
- case I40E_LINK_SPEED_1GB:
- ethtool_cmd_speed_set(ecmd, SPEED_1000);
- break;
- case I40E_LINK_SPEED_100MB:
- ethtool_cmd_speed_set(ecmd, SPEED_100);
- break;
- default:
- break;
- }
- ecmd->duplex = DUPLEX_FULL;
- } else {
- ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
- ecmd->duplex = DUPLEX_UNKNOWN;
- }
-
return 0;
}
@@ -600,6 +637,8 @@ static int i40e_set_settings(struct net_device *netdev,
config.eeer = abilities.eeer_val;
config.low_power_ctrl = abilities.d3_lpan;
+ /* save the requested speeds */
+ hw->phy.link_info.requested_speeds = config.link_speed;
/* set link and auto negotiation so changes take effect */
config.abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
/* If link is up put link down */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index d3416a4a8f5a..bb876e310908 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1,7 +1,7 @@
/*******************************************************************************
*
* Intel Ethernet Controller XL710 Family Linux Driver
- * Copyright(c) 2013 - 2014 Intel Corporation.
+ * Copyright(c) 2013 - 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -9099,6 +9099,7 @@ static void i40e_print_features(struct i40e_pf *pf)
**/
static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ struct i40e_aq_get_phy_abilities_resp abilities;
struct i40e_pf *pf;
struct i40e_hw *hw;
static u16 pfs_found;
@@ -9454,6 +9455,13 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_warn(&pdev->dev, "Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.\n");
}
+ /* get the requested speeds from the fw */
+ err = i40e_aq_get_phy_capabilities(hw, false, false, &abilities, NULL);
+ if (err)
+ dev_info(&pf->pdev->dev, "get phy abilities failed, aq_err %d, advertised speed settings may not be correct\n",
+ err);
+ pf->hw.phy.link_info.requested_speeds = abilities.link_speed;
+
/* print a string summarizing features */
i40e_print_features(pf);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 86a927b88ef4..17f1647ab1d6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -1,7 +1,7 @@
/*******************************************************************************
*
* Intel Ethernet Controller XL710 Family Linux Driver
- * Copyright(c) 2013 - 2014 Intel Corporation.
+ * Copyright(c) 2013 - 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -180,6 +180,7 @@ struct i40e_link_status {
u16 max_frame_size;
bool crc_enable;
u8 pacing;
+ u8 requested_speeds;
};
struct i40e_phy_info {
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h
index c8cd8afdbf8f..a2693865594a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h
@@ -1,7 +1,7 @@
/*******************************************************************************
*
* Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 - 2014 Intel Corporation.
+ * Copyright(c) 2013 - 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -180,6 +180,7 @@ struct i40e_link_status {
u16 max_frame_size;
bool crc_enable;
u8 pacing;
+ u8 requested_speeds;
};
struct i40e_phy_info {
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-19 07:01:25 +0000