summaryrefslogtreecommitdiffstats
path: root/fs/jffs2/wbuf.c
diff options
context:
space:
mode:
Diffstat (limited to 'fs/jffs2/wbuf.c')
-rw-r--r--fs/jffs2/wbuf.c164
1 files changed, 108 insertions, 56 deletions
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index c8128069ecf0..996d922e503e 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -9,7 +9,7 @@
*
* For licensing information, see the file 'LICENCE' in this directory.
*
- * $Id: wbuf.c,v 1.82 2004/11/20 22:08:31 dwmw2 Exp $
+ * $Id: wbuf.c,v 1.92 2005/04/05 12:51:54 dedekind Exp $
*
*/
@@ -83,7 +83,7 @@ static void jffs2_wbuf_dirties_inode(struct jffs2_sb_info *c, uint32_t ino)
struct jffs2_inodirty *new;
/* Mark the superblock dirty so that kupdated will flush... */
- OFNI_BS_2SFFJ(c)->s_dirt = 1;
+ jffs2_erase_pending_trigger(c);
if (jffs2_wbuf_pending_for_ino(c, ino))
return;
@@ -130,7 +130,10 @@ static inline void jffs2_refile_wbuf_blocks(struct jffs2_sb_info *c)
}
}
-static void jffs2_block_refile(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb)
+#define REFILE_NOTEMPTY 0
+#define REFILE_ANYWAY 1
+
+static void jffs2_block_refile(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, int allow_empty)
{
D1(printk("About to refile bad block at %08x\n", jeb->offset));
@@ -144,7 +147,7 @@ static void jffs2_block_refile(struct jffs2_sb_info *c, struct jffs2_eraseblock
D1(printk("Refiling block at %08x to bad_used_list\n", jeb->offset));
list_add(&jeb->list, &c->bad_used_list);
} else {
- BUG();
+ BUG_ON(allow_empty == REFILE_NOTEMPTY);
/* It has to have had some nodes or we couldn't be here */
D1(printk("Refiling block at %08x to erase_pending_list\n", jeb->offset));
list_add(&jeb->list, &c->erase_pending_list);
@@ -179,7 +182,7 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
jeb = &c->blocks[c->wbuf_ofs / c->sector_size];
- jffs2_block_refile(c, jeb);
+ jffs2_block_refile(c, jeb, REFILE_NOTEMPTY);
/* Find the first node to be recovered, by skipping over every
node which ends before the wbuf starts, or which is obsolete. */
@@ -264,17 +267,16 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
ret = jffs2_reserve_space_gc(c, end-start, &ofs, &len);
if (ret) {
printk(KERN_WARNING "Failed to allocate space for wbuf recovery. Data loss ensues.\n");
- if (buf)
- kfree(buf);
+ kfree(buf);
return;
}
if (end-start >= c->wbuf_pagesize) {
- /* Need to do another write immediately. This, btw,
- means that we'll be writing from 'buf' and not from
- the wbuf. Since if we're writing from the wbuf there
- won't be more than a wbuf full of data, now will
- there? :) */
-
+ /* Need to do another write immediately, but it's possible
+ that this is just because the wbuf itself is completely
+ full, and there's nothing earlier read back from the
+ flash. Hence 'buf' isn't necessarily what we're writing
+ from. */
+ unsigned char *rewrite_buf = buf?:c->wbuf;
uint32_t towrite = (end-start) - ((end-start)%c->wbuf_pagesize);
D1(printk(KERN_DEBUG "Write 0x%x bytes at 0x%08x in wbuf recover\n",
@@ -292,9 +294,9 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
#endif
if (jffs2_cleanmarker_oob(c))
ret = c->mtd->write_ecc(c->mtd, ofs, towrite, &retlen,
- buf, NULL, c->oobinfo);
+ rewrite_buf, NULL, c->oobinfo);
else
- ret = c->mtd->write(c->mtd, ofs, towrite, &retlen, buf);
+ ret = c->mtd->write(c->mtd, ofs, towrite, &retlen, rewrite_buf);
if (ret || retlen != towrite) {
/* Argh. We tried. Really we did. */
@@ -321,10 +323,10 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
c->wbuf_len = (end - start) - towrite;
c->wbuf_ofs = ofs + towrite;
- memcpy(c->wbuf, buf + towrite, c->wbuf_len);
+ memmove(c->wbuf, rewrite_buf + towrite, c->wbuf_len);
/* Don't muck about with c->wbuf_inodes. False positives are harmless. */
-
- kfree(buf);
+ if (buf)
+ kfree(buf);
} else {
/* OK, now we're left with the dregs in whichever buffer we're using */
if (buf) {
@@ -413,9 +415,9 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
int ret;
size_t retlen;
- /* Nothing to do if not NAND flash. In particular, we shouldn't
+ /* Nothing to do if not write-buffering the flash. In particular, we shouldn't
del_timer() the timer we never initialised. */
- if (jffs2_can_mark_obsolete(c))
+ if (!jffs2_is_writebuffered(c))
return 0;
if (!down_trylock(&c->alloc_sem)) {
@@ -424,7 +426,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
BUG();
}
- if(!c->wbuf || !c->wbuf_len)
+ if (!c->wbuf_len) /* already checked c->wbuf above */
return 0;
/* claim remaining space on the page
@@ -433,7 +435,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
if we have a switch to next page, we will not have
enough remaining space for this.
*/
- if (pad) {
+ if (pad && !jffs2_dataflash(c)) {
c->wbuf_len = PAD(c->wbuf_len);
/* Pad with JFFS2_DIRTY_BITMASK initially. this helps out ECC'd NOR
@@ -484,7 +486,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
spin_lock(&c->erase_completion_lock);
/* Adjust free size of the block if we padded. */
- if (pad) {
+ if (pad && !jffs2_dataflash(c)) {
struct jffs2_eraseblock *jeb;
jeb = &c->blocks[c->wbuf_ofs / c->sector_size];
@@ -532,6 +534,9 @@ int jffs2_flush_wbuf_gc(struct jffs2_sb_info *c, uint32_t ino)
D1(printk(KERN_DEBUG "jffs2_flush_wbuf_gc() called for ino #%u...\n", ino));
+ if (!c->wbuf)
+ return 0;
+
down(&c->alloc_sem);
if (!jffs2_wbuf_pending_for_ino(c, ino)) {
D1(printk(KERN_DEBUG "Ino #%d not pending in wbuf. Returning\n", ino));
@@ -547,6 +552,10 @@ int jffs2_flush_wbuf_gc(struct jffs2_sb_info *c, uint32_t ino)
D1(printk(KERN_DEBUG "jffs2_flush_wbuf_gc() padding. Not finished checking\n"));
down_write(&c->wbuf_sem);
ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING);
+ /* retry flushing wbuf in case jffs2_wbuf_recover
+ left some data in the wbuf */
+ if (ret)
+ ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING);
up_write(&c->wbuf_sem);
} else while (old_wbuf_len &&
old_wbuf_ofs == c->wbuf_ofs) {
@@ -561,6 +570,10 @@ int jffs2_flush_wbuf_gc(struct jffs2_sb_info *c, uint32_t ino)
down(&c->alloc_sem);
down_write(&c->wbuf_sem);
ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING);
+ /* retry flushing wbuf in case jffs2_wbuf_recover
+ left some data in the wbuf */
+ if (ret)
+ ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING);
up_write(&c->wbuf_sem);
break;
}
@@ -578,15 +591,27 @@ int jffs2_flush_wbuf_pad(struct jffs2_sb_info *c)
{
int ret;
+ if (!c->wbuf)
+ return 0;
+
down_write(&c->wbuf_sem);
ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT);
+ /* retry - maybe wbuf recover left some data in wbuf. */
+ if (ret)
+ ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT);
up_write(&c->wbuf_sem);
return ret;
}
+#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+#define PAGE_DIV(x) ( ((unsigned long)(x) / (unsigned long)(c->wbuf_pagesize)) * (unsigned long)(c->wbuf_pagesize) )
+#define PAGE_MOD(x) ( (unsigned long)(x) % (unsigned long)(c->wbuf_pagesize) )
+#else
#define PAGE_DIV(x) ( (x) & (~(c->wbuf_pagesize - 1)) )
#define PAGE_MOD(x) ( (x) & (c->wbuf_pagesize - 1) )
+#endif
+
int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsigned long count, loff_t to, size_t *retlen, uint32_t ino)
{
struct kvec outvecs[3];
@@ -601,7 +626,7 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
uint32_t outvec_to = to;
/* If not NAND flash, don't bother */
- if (!c->wbuf)
+ if (!jffs2_is_writebuffered(c))
return jffs2_flash_direct_writev(c, invecs, count, to, retlen);
down_write(&c->wbuf_sem);
@@ -630,7 +655,7 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
erase block. Anything else, and you die.
New block starts at xxx000c (0-b = block header)
*/
- if ( (to & ~(c->sector_size-1)) != (c->wbuf_ofs & ~(c->sector_size-1)) ) {
+ if (SECTOR_ADDR(to) != SECTOR_ADDR(c->wbuf_ofs)) {
/* It's a write to a new block */
if (c->wbuf_len) {
D1(printk(KERN_DEBUG "jffs2_flash_writev() to 0x%lx causes flush of wbuf at 0x%08x\n", (unsigned long)to, c->wbuf_ofs));
@@ -762,9 +787,18 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
if (ret < 0 || wbuf_retlen != PAGE_DIV(totlen)) {
/* At this point we have no problem,
- c->wbuf is empty.
+ c->wbuf is empty. However refile nextblock to avoid
+ writing again to same address.
*/
- *retlen = donelen;
+ struct jffs2_eraseblock *jeb;
+
+ spin_lock(&c->erase_completion_lock);
+
+ jeb = &c->blocks[outvec_to / c->sector_size];
+ jffs2_block_refile(c, jeb, REFILE_ANYWAY);
+
+ *retlen = 0;
+ spin_unlock(&c->erase_completion_lock);
goto exit;
}
@@ -819,7 +853,7 @@ int jffs2_flash_write(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *r
{
struct kvec vecs[1];
- if (jffs2_can_mark_obsolete(c))
+ if (!jffs2_is_writebuffered(c))
return c->mtd->write(c->mtd, ofs, len, retlen, buf);
vecs[0].iov_base = (unsigned char *) buf;
@@ -835,39 +869,38 @@ int jffs2_flash_read(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *re
loff_t orbf = 0, owbf = 0, lwbf = 0;
int ret;
- /* Read flash */
- if (!jffs2_can_mark_obsolete(c)) {
- down_read(&c->wbuf_sem);
-
- if (jffs2_cleanmarker_oob(c))
- ret = c->mtd->read_ecc(c->mtd, ofs, len, retlen, buf, NULL, c->oobinfo);
- else
- ret = c->mtd->read(c->mtd, ofs, len, retlen, buf);
-
- if ( (ret == -EBADMSG) && (*retlen == len) ) {
- printk(KERN_WARNING "mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n",
- len, ofs);
- /*
- * We have the raw data without ECC correction in the buffer, maybe
- * we are lucky and all data or parts are correct. We check the node.
- * If data are corrupted node check will sort it out.
- * We keep this block, it will fail on write or erase and the we
- * mark it bad. Or should we do that now? But we should give him a chance.
- * Maybe we had a system crash or power loss before the ecc write or
- * a erase was completed.
- * So we return success. :)
- */
- ret = 0;
- }
- } else
+ if (!jffs2_is_writebuffered(c))
return c->mtd->read(c->mtd, ofs, len, retlen, buf);
+ /* Read flash */
+ down_read(&c->wbuf_sem);
+ if (jffs2_cleanmarker_oob(c))
+ ret = c->mtd->read_ecc(c->mtd, ofs, len, retlen, buf, NULL, c->oobinfo);
+ else
+ ret = c->mtd->read(c->mtd, ofs, len, retlen, buf);
+
+ if ( (ret == -EBADMSG) && (*retlen == len) ) {
+ printk(KERN_WARNING "mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n",
+ len, ofs);
+ /*
+ * We have the raw data without ECC correction in the buffer, maybe
+ * we are lucky and all data or parts are correct. We check the node.
+ * If data are corrupted node check will sort it out.
+ * We keep this block, it will fail on write or erase and the we
+ * mark it bad. Or should we do that now? But we should give him a chance.
+ * Maybe we had a system crash or power loss before the ecc write or
+ * a erase was completed.
+ * So we return success. :)
+ */
+ ret = 0;
+ }
+
/* if no writebuffer available or write buffer empty, return */
if (!c->wbuf_pagesize || !c->wbuf_len)
goto exit;
/* if we read in a different block, return */
- if ( (ofs & ~(c->sector_size-1)) != (c->wbuf_ofs & ~(c->sector_size-1)) )
+ if (SECTOR_ADDR(ofs) != SECTOR_ADDR(c->wbuf_ofs))
goto exit;
if (ofs >= c->wbuf_ofs) {
@@ -1161,7 +1194,27 @@ void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c)
kfree(c->wbuf);
}
-#ifdef CONFIG_JFFS2_FS_NOR_ECC
+int jffs2_dataflash_setup(struct jffs2_sb_info *c) {
+ c->cleanmarker_size = 0; /* No cleanmarkers needed */
+
+ /* Initialize write buffer */
+ init_rwsem(&c->wbuf_sem);
+ c->wbuf_pagesize = c->sector_size;
+ c->wbuf_ofs = 0xFFFFFFFF;
+
+ c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
+ if (!c->wbuf)
+ return -ENOMEM;
+
+ printk(KERN_INFO "JFFS2 write-buffering enabled (%i)\n", c->wbuf_pagesize);
+
+ return 0;
+}
+
+void jffs2_dataflash_cleanup(struct jffs2_sb_info *c) {
+ kfree(c->wbuf);
+}
+
int jffs2_nor_ecc_flash_setup(struct jffs2_sb_info *c) {
/* Cleanmarker is actually larger on the flashes */
c->cleanmarker_size = 16;
@@ -1181,4 +1234,3 @@ int jffs2_nor_ecc_flash_setup(struct jffs2_sb_info *c) {
void jffs2_nor_ecc_flash_cleanup(struct jffs2_sb_info *c) {
kfree(c->wbuf);
}
-#endif