diff options
Diffstat (limited to 'sound/soc/codecs/wm_hubs.c')
-rw-r--r-- | sound/soc/codecs/wm_hubs.c | 166 |
1 files changed, 136 insertions, 30 deletions
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 2a61094075f8..c08d1c2f346f 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -172,7 +172,7 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) break; default: WARN(1, "Unknown DCS readback method\n"); - break; + return; } dev_dbg(codec->dev, "DCS input: %x %x\n", reg_l, reg_r); @@ -207,7 +207,7 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) /* Save the callibrated offset if we're in class W mode and * therefore don't have any analogue signal mixed in. */ - if (hubs->class_w) + if (hubs->class_w && !hubs->no_cache_class_w) hubs->class_w_dcs = dcs_cfg; } @@ -500,6 +500,36 @@ static int earpiece_event(struct snd_soc_dapm_widget *w, return 0; } +static int lineout_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *control, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + bool *flag; + + switch (w->shift) { + case WM8993_LINEOUT1N_ENA_SHIFT: + flag = &hubs->lineout1n_ena; + break; + case WM8993_LINEOUT1P_ENA_SHIFT: + flag = &hubs->lineout1p_ena; + break; + case WM8993_LINEOUT2N_ENA_SHIFT: + flag = &hubs->lineout2n_ena; + break; + case WM8993_LINEOUT2P_ENA_SHIFT: + flag = &hubs->lineout2p_ena; + break; + default: + WARN(1, "Unknown line output"); + return -EINVAL; + } + + *flag = SND_SOC_DAPM_EVENT_ON(event); + + return 0; +} + static const struct snd_kcontrol_new in1l_pga[] = { SOC_DAPM_SINGLE("IN1LP Switch", WM8993_INPUT_MIXER2, 5, 1, 0), SOC_DAPM_SINGLE("IN1LN Switch", WM8993_INPUT_MIXER2, 4, 1, 0), @@ -586,14 +616,14 @@ SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER1, 0, 1, 0), }; static const struct snd_kcontrol_new line2_mix[] = { -SOC_DAPM_SINGLE("IN2R Switch", WM8993_LINE_MIXER2, 2, 1, 0), -SOC_DAPM_SINGLE("IN2L Switch", WM8993_LINE_MIXER2, 1, 1, 0), +SOC_DAPM_SINGLE("IN1L Switch", WM8993_LINE_MIXER2, 2, 1, 0), +SOC_DAPM_SINGLE("IN1R Switch", WM8993_LINE_MIXER2, 1, 1, 0), SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER2, 0, 1, 0), }; static const struct snd_kcontrol_new line2n_mix[] = { -SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER2, 6, 1, 0), -SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER2, 5, 1, 0), +SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER2, 5, 1, 0), +SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER2, 6, 1, 0), }; static const struct snd_kcontrol_new line2p_mix[] = { @@ -613,6 +643,8 @@ SND_SOC_DAPM_INPUT("IN2RP:VXRP"), SND_SOC_DAPM_SUPPLY("MICBIAS2", WM8993_POWER_MANAGEMENT_1, 5, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("MICBIAS1", WM8993_POWER_MANAGEMENT_1, 4, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("LINEOUT_VMID_BUF", WM8993_ANTIPOP1, 7, 0, NULL, 0), + SND_SOC_DAPM_MIXER("IN1L PGA", WM8993_POWER_MANAGEMENT_2, 6, 0, in1l_pga, ARRAY_SIZE(in1l_pga)), SND_SOC_DAPM_MIXER("IN1R PGA", WM8993_POWER_MANAGEMENT_2, 4, 0, @@ -638,9 +670,8 @@ SND_SOC_DAPM_PGA("Right Output PGA", WM8993_POWER_MANAGEMENT_3, 6, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("Headphone Supply", SND_SOC_NOPM, 0, 0, hp_supply_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), -SND_SOC_DAPM_PGA_E("Headphone PGA", SND_SOC_NOPM, 0, 0, - NULL, 0, - hp_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_OUT_DRV_E("Headphone PGA", SND_SOC_NOPM, 0, 0, NULL, 0, + hp_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0, earpiece_mixer, ARRAY_SIZE(earpiece_mixer)), @@ -654,10 +685,10 @@ SND_SOC_DAPM_MIXER("SPKR Boost", SND_SOC_NOPM, 0, 0, right_speaker_boost, ARRAY_SIZE(right_speaker_boost)), SND_SOC_DAPM_SUPPLY("TSHUT", WM8993_POWER_MANAGEMENT_2, 14, 0, NULL, 0), -SND_SOC_DAPM_PGA("SPKL Driver", WM8993_POWER_MANAGEMENT_1, 12, 0, - NULL, 0), -SND_SOC_DAPM_PGA("SPKR Driver", WM8993_POWER_MANAGEMENT_1, 13, 0, - NULL, 0), +SND_SOC_DAPM_OUT_DRV("SPKL Driver", WM8993_POWER_MANAGEMENT_1, 12, 0, + NULL, 0), +SND_SOC_DAPM_OUT_DRV("SPKR Driver", WM8993_POWER_MANAGEMENT_1, 13, 0, + NULL, 0), SND_SOC_DAPM_MIXER("LINEOUT1 Mixer", SND_SOC_NOPM, 0, 0, line1_mix, ARRAY_SIZE(line1_mix)), @@ -673,14 +704,18 @@ SND_SOC_DAPM_MIXER("LINEOUT2N Mixer", SND_SOC_NOPM, 0, 0, SND_SOC_DAPM_MIXER("LINEOUT2P Mixer", SND_SOC_NOPM, 0, 0, line2p_mix, ARRAY_SIZE(line2p_mix)), -SND_SOC_DAPM_PGA("LINEOUT1N Driver", WM8993_POWER_MANAGEMENT_3, 13, 0, - NULL, 0), -SND_SOC_DAPM_PGA("LINEOUT1P Driver", WM8993_POWER_MANAGEMENT_3, 12, 0, - NULL, 0), -SND_SOC_DAPM_PGA("LINEOUT2N Driver", WM8993_POWER_MANAGEMENT_3, 11, 0, - NULL, 0), -SND_SOC_DAPM_PGA("LINEOUT2P Driver", WM8993_POWER_MANAGEMENT_3, 10, 0, - NULL, 0), +SND_SOC_DAPM_OUT_DRV_E("LINEOUT1N Driver", WM8993_POWER_MANAGEMENT_3, 13, 0, + NULL, 0, lineout_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_OUT_DRV_E("LINEOUT1P Driver", WM8993_POWER_MANAGEMENT_3, 12, 0, + NULL, 0, lineout_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_OUT_DRV_E("LINEOUT2N Driver", WM8993_POWER_MANAGEMENT_3, 11, 0, + NULL, 0, lineout_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_OUT_DRV_E("LINEOUT2P Driver", WM8993_POWER_MANAGEMENT_3, 10, 0, + NULL, 0, lineout_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_OUTPUT("SPKOUTLP"), SND_SOC_DAPM_OUTPUT("SPKOUTLN"), @@ -834,9 +869,11 @@ static const struct snd_soc_dapm_route lineout1_diff_routes[] = { }; static const struct snd_soc_dapm_route lineout1_se_routes[] = { + { "LINEOUT1N Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT1N Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT1N Mixer", "Right Output Switch", "Right Output PGA" }, + { "LINEOUT1P Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT1P Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT1N Driver", NULL, "LINEOUT1N Mixer" }, @@ -844,8 +881,8 @@ static const struct snd_soc_dapm_route lineout1_se_routes[] = { }; static const struct snd_soc_dapm_route lineout2_diff_routes[] = { - { "LINEOUT2 Mixer", "IN2L Switch", "IN2L PGA" }, - { "LINEOUT2 Mixer", "IN2R Switch", "IN2R PGA" }, + { "LINEOUT2 Mixer", "IN1L Switch", "IN1L PGA" }, + { "LINEOUT2 Mixer", "IN1R Switch", "IN1R PGA" }, { "LINEOUT2 Mixer", "Output Switch", "Right Output PGA" }, { "LINEOUT2N Driver", NULL, "LINEOUT2 Mixer" }, @@ -853,9 +890,11 @@ static const struct snd_soc_dapm_route lineout2_diff_routes[] = { }; static const struct snd_soc_dapm_route lineout2_se_routes[] = { + { "LINEOUT2N Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT2N Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT2N Mixer", "Right Output Switch", "Right Output PGA" }, + { "LINEOUT2P Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT2P Mixer", "Right Output Switch", "Right Output PGA" }, { "LINEOUT2N Driver", NULL, "LINEOUT2N Mixer" }, @@ -895,7 +934,7 @@ int wm_hubs_add_analogue_controls(struct snd_soc_codec *codec) WM8993_MIXOUTR_ZC | WM8993_MIXOUT_VU, WM8993_MIXOUTR_ZC | WM8993_MIXOUT_VU); - snd_soc_add_controls(codec, analogue_snd_controls, + snd_soc_add_codec_controls(codec, analogue_snd_controls, ARRAY_SIZE(analogue_snd_controls)); snd_soc_dapm_new_controls(dapm, analogue_dapm_widgets, @@ -943,6 +982,11 @@ int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *codec, int jd_scthr, int jd_thr, int micbias1_lvl, int micbias2_lvl) { + struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + + hubs->lineout1_se = !lineout1_diff; + hubs->lineout2_se = !lineout2_diff; + if (!lineout1_diff) snd_soc_update_bits(codec, WM8993_LINE_MIXER1, WM8993_LINEOUT1_MODE, @@ -952,12 +996,6 @@ int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *codec, WM8993_LINEOUT2_MODE, WM8993_LINEOUT2_MODE); - /* If the line outputs are differential then we aren't presenting - * VMID as an output and can disable it. - */ - if (lineout1_diff && lineout2_diff) - codec->dapm.idle_bias_off = 1; - if (lineout1fb) snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL, WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB); @@ -978,6 +1016,74 @@ int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *codec, } EXPORT_SYMBOL_GPL(wm_hubs_handle_analogue_pdata); +void wm_hubs_vmid_ena(struct snd_soc_codec *codec) +{ + struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + int val = 0; + + if (hubs->lineout1_se) + val |= WM8993_LINEOUT1N_ENA | WM8993_LINEOUT1P_ENA; + + if (hubs->lineout2_se) + val |= WM8993_LINEOUT2N_ENA | WM8993_LINEOUT2P_ENA; + + /* Enable the line outputs while we power up */ + snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_3, val, val); +} +EXPORT_SYMBOL_GPL(wm_hubs_vmid_ena); + +void wm_hubs_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + int val; + + switch (level) { + case SND_SOC_BIAS_STANDBY: + /* Clamp the inputs to VMID while we ramp to charge caps */ + snd_soc_update_bits(codec, WM8993_INPUTS_CLAMP_REG, + WM8993_INPUTS_CLAMP, WM8993_INPUTS_CLAMP); + break; + + case SND_SOC_BIAS_ON: + /* Turn off any unneded single ended outputs */ + val = 0; + + if (hubs->lineout1_se && hubs->lineout1n_ena) + val |= WM8993_LINEOUT1N_ENA; + + if (hubs->lineout1_se && hubs->lineout1p_ena) + val |= WM8993_LINEOUT1P_ENA; + + if (hubs->lineout2_se && hubs->lineout2n_ena) + val |= WM8993_LINEOUT2N_ENA; + + if (hubs->lineout2_se && hubs->lineout2p_ena) + val |= WM8993_LINEOUT2P_ENA; + + snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_3, + WM8993_LINEOUT1N_ENA | + WM8993_LINEOUT1P_ENA | + WM8993_LINEOUT2N_ENA | + WM8993_LINEOUT2P_ENA, + val); + + if (!hubs->lineout1n_ena && !hubs->lineout1p_ena && + !hubs->lineout2n_ena && !hubs->lineout2p_ena) + snd_soc_update_bits(codec, WM8993_ANTIPOP1, + WM8993_LINEOUT_VMID_BUF_ENA, 0); + + /* Remove the input clamps */ + snd_soc_update_bits(codec, WM8993_INPUTS_CLAMP_REG, + WM8993_INPUTS_CLAMP, 0); + break; + + default: + break; + } +} +EXPORT_SYMBOL_GPL(wm_hubs_set_bias_level); + MODULE_DESCRIPTION("Shared support for Wolfson hubs products"); MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); MODULE_LICENSE("GPL"); |