summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bridge/cadence
Commit message (Collapse)AuthorAgeFilesLines
* drm/bridge: Pass full state to atomic_disableMaxime Ripard2025-02-191-1/+1
| | | | | | | | | | | | It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_disable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
* drm/bridge: Pass full state to atomic_enableMaxime Ripard2025-02-191-2/+1
| | | | | | | | | | | | It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_enable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
* gpu: cdns-mhdp8546: fix call balance of mhdp->clk handling routinesVitalii Mordan2025-02-171-9/+3
| | | | | | | | | | | | | | | | | | | | | If the clock mhdp->clk was not enabled in cdns_mhdp_probe(), it should not be disabled in any path. The return value of clk_prepare_enable() is not checked. If mhdp->clk was not enabled, it may be disabled in the error path of cdns_mhdp_probe() (e.g., if cdns_mhdp_load_firmware() fails) or in cdns_mhdp_remove() after a successful cdns_mhdp_probe() call. Use the devm_clk_get_enabled() helper function to ensure proper call balance for mhdp->clk. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: fb43aa0acdfd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge") Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250214154632.1907425-1-mordan@ispras.ru
* drm/connector: make mode_valid take a const struct drm_display_modeDmitry Baryshkov2025-01-071-1/+1
| | | | | | | | | | | | | | | | | The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge take a const struct drm_display_mode argument. Change the mode_valid callback of drm_connector to also take a const argument. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst2024-12-092-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The v6.13-rc2 release included a bunch of breaking changes, specifically the MODULE_IMPORT_NS commit. Backmerge in order to fix them before the next pull-request. Include the fix from Stephen Roswell. Caused by commit 25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths") Interacting with commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
| * Get rid of 'remove_new' relic from platform driver structLinus Torvalds2024-12-012-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drm/bridge: cdns-mhdp8546: Remove unused functionsDr. David Alan Gilbert2024-11-112-31/+0
|/ | | | | | | | | | | | | | cdns_mhdp_hdcp_set_lc() and cdns_mhdp_hdcp_set_public_key_param() were added by commit 6a3608eae6d3 ("drm: bridge: cdns-mhdp8546: Enable HDCP") but never used. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241005232017.305217-1-linux@treblig.org
* move asm/unaligned.h to linux/unaligned.hAl Viro2024-10-022-2/+2
| | | | | | | | | | | | | | | | | | | asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
* Merge drm/drm-next into drm-misc-nextMaxime Ripard2024-05-271-4/+4
|\ | | | | | | | | | | Let's start the new release cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
| * Revert "drm: Switch DRM_DISPLAY_HELPER to depends on"Geert Uytterhoeven2024-05-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard <mripard@kernel.org>
| * Revert "drm: Switch DRM_DISPLAY_DP_HELPER to depends on"Geert Uytterhoeven2024-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 0323287de87d7e6e9c22c57d7440aa353a2298d0, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard <mripard@kernel.org>
| * Revert "drm: Switch DRM_DISPLAY_HDCP_HELPER to depends on"Geert Uytterhoeven2024-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 3166e7e6d935caaef07605a5c90773fbf9ffeaf4, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/a40e70a0abd3d841c23c107d452a43fdd70ef37a.1713780345.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard <mripard@kernel.org>
* | drm/bridge: cdns-mhdp8546: Remove a redundant check on existence of ↵Sui Jingfeng2024-05-131-5/+0
|/ | | | | | | | | | | | | | | | | | bridge->encoder In the cdns_mhdp_connector_init() function, the check on the existence of bridge->encoder is not necessary, as it has already been checked in the drm_bridge_attach() function. As the cdns_mhdp_connector_init() is only called by cdns_mhdp_attach(), it is guaranteed that the .encoder member of the struct drm_bridge is not NULL when cdns_mhdp_attach() gets called. Remove the redundant checking codes "if (!bridge->encoder) { ... }". Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-8-sui.jingfeng@linux.dev
* drm: bridge: cdns-mhdp8546: Fix possible null pointer dereferenceAleksandr Mishin2024-04-081-0/+3
| | | | | | | | | | | | | | | In cdns_mhdp_atomic_enable(), the return value of drm_mode_duplicate() is assigned to mhdp_state->current_mode, and there is a dereference of it in drm_mode_set_name(), which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Fix this bug add a check of mhdp_state->current_mode. Fixes: fb43aa0acdfd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240408125810.21899-1-amishin@t-argos.ru
* drm: Switch DRM_DISPLAY_HDCP_HELPER to depends onMaxime Ripard2024-03-281-1/+1
| | | | | | | | | | | | | | | Most of our helpers have relied on being selected so far through Kconfig, but that creates issues when we have multiple layers of helpers with some depending on others. Indeed, select doesn't select a dependency's dependencies, and thus isn't super intuitive. Depends on however doesn't have that limitation, so we can just switch all the drivers that were selecting DRM_DISPLAY_HDCP_HELPER to depend on it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-11-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
* drm: Switch DRM_DISPLAY_DP_HELPER to depends onMaxime Ripard2024-03-281-1/+1
| | | | | | | | | | | | | | | Most of our helpers have relied on being selected so far through Kconfig, but that creates issues when we have multiple layers of helpers with some depending on others. Indeed, select doesn't select a dependency's dependencies, and thus isn't super intuitive. Depends on however doesn't have that limitation, so we can just switch all the drivers that were selecting DRM_DISPLAY_DP_HELPER to depend on it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-10-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
* drm: Switch DRM_DISPLAY_HELPER to depends onMaxime Ripard2024-03-281-2/+2
| | | | | | | | | | | | | | | Most of our helpers have relied on being selected so far through Kconfig, but that creates issues when we have multiple layers of helpers with some depending on others. Indeed, select doesn't select a dependency's dependencies, and thus isn't super intuitive. Depends on however doesn't have that limitation, so we can just switch all the drivers that were selecting DRM_DISPLAY_HELPER to depend on it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-8-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
* drm/bridge: cdns-mhdp8546: clear the EDID property on failuresJani Nikula2024-02-091-1/+3
| | | | | | | | If EDID read fails, clear the EDID property. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/a754d9f90fe2addb9d90f9638e3d53dce87bdabc.1706038510.git.jani.nikula@intel.com
* drm/bridge: cdns-mhdp8546: switch to ->edid_read callbackJani Nikula2024-02-091-13/+13
| | | | | | | | Prefer using the struct drm_edid based callback and functions. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/88fde35b8d75860d7a2caad94d774aa96b443754.1706038510.git.jani.nikula@intel.com
* drm/bridge: cdns-mhdp8546: Fix use of uninitialized variableTomi Valkeinen2023-12-071-1/+2
| | | | | | | | | | 'ret' could be uninitialized at the end of the function, although it's not clear if that can happen in practice. Fixes: 6a3608eae6d3 ("drm: bridge: cdns-mhdp8546: Enable HDCP") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-3-c22b2444f5f5@ideasonboard.com
* drm/bridge: cdns-mhdp8546: Convert to platform remove callback returning voidUwe Kleine-König2023-11-211-4/+2
| | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-23-u.kleine-koenig@pengutronix.de
* drm/bridge: cdns-mhdp8546: Improve error reporting in remove callbackUwe Kleine-König2023-11-211-9/+9
| | | | | | | | | | | | | Replace the generic error message issued by the driver core when the remove callback returns non-zero ("remove callback returned a non-zero value. This will be ignored.") by a message that tells the actual problem. Also simplify a bit by checking the return value of wait_event_timeout a bit later. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-22-u.kleine-koenig@pengutronix.de
* drm: bridge: for GENERIC_PHY_MIPI_DPHY also select GENERIC_PHYRandy Dunlap2023-08-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Three DRM bridge drivers select GENERIC_PHY_MIPI_DPHY when GENERIC_PHY might not be set. This causes Kconfig warnings and a build error. WARNING: unmet direct dependencies detected for GENERIC_PHY_MIPI_DPHY Depends on [n]: GENERIC_PHY [=n] Selected by [y]: - DRM_NWL_MIPI_DSI [=y] && DRM_BRIDGE [=y] && DRM [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y] - DRM_SAMSUNG_DSIM [=y] && DRM [=y] && DRM_BRIDGE [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y] (drm/bridge/cadence/Kconfig was found by inspection.) aarch64-linux-ld: drivers/gpu/drm/bridge/samsung-dsim.o: in function `samsung_dsim_set_phy_ctrl': drivers/gpu/drm/bridge/samsung-dsim.c:731: undefined reference to `phy_mipi_dphy_get_default_config_for_hsclk' Prevent these warnings and build error by also selecting GENERIC_PHY whenever selecting GENERIC_PHY_MIPI_DPHY. Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework") Fixes: 44cfc6233447 ("drm/bridge: Add NWL MIPI DSI host controller support") Fixes: 171b3b1e0f8b ("drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Aleksandr Nogikh <nogikh@google.com> Link: lore.kernel.org/r/20230803144227.2187749-1-nogikh@google.com Cc: Adam Ford <aford173@gmail.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Robert Foss <rfoss@kernel.org> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Adam Ford <aford173@gmail.com> Tested-by: Aleksandr Nogikh <nogikh@google.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804030140.21395-1-rdunlap@infradead.org
* drm/bridge: fix -Wunused-const-variable= warningZhu Wang2023-07-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | When building with W=1, the following warning occurs. drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:48:17: warning: ‘anx781x_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx781x_i2c_addresses[] = { ^~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:40:17: warning: ‘anx7808_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx7808_i2c_addresses[] = { When CONFIG_IO is disabled, above two variables are not used, since the place where it is used is inclueded in the macro CONFIG_OF. Even for drivers that do not depend on CONFIG_OF, it's almost always better to leave out the of_match_ptr(), since the only thing it can possibly do is to save a few bytes of .text if a driver can be used both with and without it. Hence we remove all of_match_ptr() used in other places. Fixes: 0647e7dd3f7a ("drm/bridge: Add Analogix anx78xx support") Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230731021345.219588-1-wangzhu9@huawei.com
* drm: Explicitly include correct DT includesRob Herring2023-07-212-3/+1
| | | | | | | | | | | | | | | | | | | | The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
* drm/bridge: cdns-mhdp8546: Fix the interrupt enable/disableNikhil Devshatwar2023-07-101-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | When removing the tidss driver, there is a warning reported by kernel about an unhandled interrupt for mhdp driver. [ 43.238895] irq 31: nobody cared (try booting with the "irqpoll" option) ... [snipped backtrace] [ 43.330735] handlers: [ 43.333020] [<000000005367c4f9>] irq_default_primary_handler threaded [<000000007e02b601>] cdns_mhdp_irq_handler [cdns_mhdp8546] [ 43.344607] Disabling IRQ #31 This happens because as part of cdns_mhdp_bridge_hpd_disable, driver tries to disable the interrupts. While disabling the SW_EVENT interrupts, it accidentally enables the MBOX interrupts, which are not handled by the driver. Fix this with a read-modify-write to update only required bits. Use the enable / disable function as required in other places. Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-9-a-bhatia1@ti.com
* drm/bridge: mhdp8546: Set input_bus_flags from atomic_checkNikhil Devshatwar2023-07-104-10/+14
| | | | | | | | | | | | | | | | input_bus_flags are specified in drm_bridge_timings (legacy) as well as drm_bridge_state->input_bus_cfg.flags The flags from the timings will be deprecated. Bridges are supposed to validate and set the bridge state flags from atomic_check. Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com> [a-bhatia1: replace timings in cdns_mhdp_platform_info by input_bus_flags] Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-5-a-bhatia1@ti.com
* drm/bridge: mhdp8546: Add minimal format negotiationNikhil Devshatwar2023-07-101-0/+22
| | | | | | | | | | | | | | | | | | With new connector model, mhdp bridge will not create the connector and SoC driver will rely on format negotiation to setup the encoder format. Support minimal format negotiations hooks in the drm_bridge_funcs. Complete format negotiation can be added based on EDID data. This patch adds the minimal required support to avoid failure after moving to new connector model. Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com> [a-bhatia1: Drop the output_fmt check condition] Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-4-a-bhatia1@ti.com
* drm/bridge: cdns-dsi: Convert to platform remove callback returning voidUwe Kleine-König2023-03-201-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-3-u.kleine-koenig@pengutronix.de
* drm/bridge: Remove unnecessary include statements for drm_crtc_helper.hThomas Zimmermann2023-01-181-1/+0
| | | | | | | | | | | | | | | | | Several source files include drm_crtc_helper.h without needing it or only to get its transitive include statements; leading to unnecessary compile-time dependencies. Drop drm_crtc_helper.h where possible. v2: * update commit message (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-8-tzimmermann@suse.de
* drm/bridge: cdns-dsi: Add support for J721E wrapperRahul T R2023-01-176-1/+132
| | | | | | | | | | | | | | | | | | | | | | Add support for wrapper settings for DSI bridge on j721e. Also enable DPI0 --------------- ----------------------- | -------| |------- | | DSS | DPI2 |----->| DPI0 | DSI Wrapper | | -------| |------- | --------------- ----------------------- As shown above DPI2 output of DSS is connected to DPI0 input of DSI Wrapper, DSI wrapper gives control wheather to enable/disable DPI0 input. In j721e above is the only configuration supported Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-6-r-ravikumar@ti.com
* drm/bridge: cdns-dsi: Create a header fileRahul T R2023-01-172-46/+66
| | | | | | | | | | | | Create a header file for cdns dsi and move structure definations to prepare for adding j721e wrapper support Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-5-r-ravikumar@ti.com
* drm/bridge: cdns-dsi: Move to drm/bridge/cadenceRahul T R2023-01-173-0/+1343
| | | | | | | | | | | | Move the cadence dsi bridge under drm/bridge/cadence directory, to prepare for adding j721e wrapper support Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-4-r-ravikumar@ti.com
* gpu/drm/bridge/cadence: avoid flush_scheduled_work() usageTetsuo Handa2022-09-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Like commit c4f135d643823a86 ("workqueue: Wrap flush_workqueue() using a macro") says, flush_scheduled_work() is dangerous and will be forbidden. We are on the way for removing all flush_scheduled_work() callers from the kernel, and this patch is for removing flush_scheduled_work() call from cadence driver. Since cdns-mhdp8546 driver uses 4 works mhdp->modeset_retry_work mhdp->hpd_work mhdp->hdcp.check_work mhdp->hdcp.prop_work I assume that flush_scheduled_work() in cdns_mhdp_remove() needs to wait for only these 4 works. Since mhdp->modeset_retry_work already uses cancel_work_sync(), I assume that flush_scheduled_work() needs to wait for only 3 works. But I came to wonder whether mhdp->hdcp.check_work should be flushed or cancelled. While flush_scheduled_work() waits for completion of works which were already queued to system_wq, mhdp->hdcp.check_work is a delayed work. That is, this work won't be queued to system_wq unless timeout expires. Current code will wait for mhdp->hdcp.check_work only if timeout already expired. If timeout is not expired yet, flush_scheduled_work() will fail to cancel mhdp->hdcp.check_work, and cdns_mhdp_hdcp_check_work() which is triggered by mhdp->hdcp.check_work will schedule hdcp->check_work, which is too late for flush_scheduled_work() to wait for completion of cdns_mhdp_hdcp_prop_work(). But since I couldn't get comments on how do we want to handle this race window [1], this patch chose "do nothing" for mhdp->hdcp.check_work and mhdp->hdcp.prop_work. That is, I assume that flush_scheduled_work() in cdns_mhdp_remove() needs to wait for only mhdp->hpd_work work. Link: https://lkml.kernel.org/r/943273cb-c2ec-24e3-5edb-64eacc6e2d30@I-love.SAKURA.ne.jp [1] Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/216591bc-28bb-0453-10bb-59e268dff540@I-love.SAKURA.ne.jp
* drm: Remove linux/media-bus-format.h from drm_crtc.hVille Syrjälä2022-07-051-0/+1
| | | | | | | | | | | | | | | | | | drm_crtc.h has no need for linux/media-bus-format.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/media-bus-format.h. Quite a few placs do currently depend on linux/media-bus-format.h without actually including it directly. All of those need to be fixed up. v2: Deal with ingenic as well v3: Fix up mxsfb and remaining parts of imx Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-4-ville.syrjala@linux.intel.com
* drm: Drop drm_edid.h from drm_crtc.hVille Syrjälä2022-06-201-0/+1
| | | | | | | | | | | | | | | | | | drm_crtc.h has no need for drm_edid.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_edid.h. Quite a few placs do currently depend on drm_edid.h without actually including it directly. All of those need to be fixed up. v2: Fix up i915 and msm some more v3: Fix alphabetical ordering (Sam) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
* drm/display: Move HDCP helpers into display-helper moduleThomas Zimmermann2022-04-253-2/+3
| | | | | | | | | | | | | | | | Move DRM's HDCP helper library into the display/ subdirectory and add it to DRM's display helpers. Split the header file into core and helpers. Update all affected drivers. No functional changes. v3: * fix Kconfig dependencies v2: * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-7-tzimmermann@suse.de
* drm/display: Introduce a DRM display-helper moduleThomas Zimmermann2022-04-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the DP-helper module with a display-helper module. The support for DisplayPort becomes an internal option that drivers have to select. Update all related Kconfig and Makefile rules. Besides the existing code for DisplayPort, the new module will contain helpers for other video-output standards, such as HDMI. Drivers will have to select their required video-output helpers. Linking all display-related code into a single module avoids the proliferation of small kernel modules. The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz, and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace to drm_display_helper. v2: * mention module parameters in commit message (Javier) * distiguish between display module and DP support in Kconfig * update Makefile rules for DP helpers * move Kconfig rules into separate file under display/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-4-tzimmermann@suse.de
* drm: Rename dp/ to display/Thomas Zimmermann2022-04-252-2/+2
| | | | | | | | | | | | | | | | | | | Rename dp/ to display/ to account for additional display-related helpers, such as HDMI. Update all related include statements. No functional changes. Various drivers, such as i915 and amdgpu, use similar naming scheme by putting code for video-output standards into a local display/ directory. The new directory's name is aligned with this convention. v2: * update commit message (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
* drm/connector: Fix typo in output formatMaxime Ripard2022-01-251-9/+9
| | | | | | | | | The HDMI specification mentions YCbCr everywhere, but our enums have YCrCb. Let's rename it to match. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-5-maxime@cerno.tech
* drm/dp: Move public DisplayPort headers into dp/Thomas Zimmermann2022-01-172-2/+2
| | | | | | | | | | | | Move all public DisplayPort headers into dp/ and update users. No functional changes. v3: * rebased onto latest drm-tip Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-5-tzimmermann@suse.de
* drm/dp: Move DisplayPort helpers into separate helper moduleThomas Zimmermann2022-01-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move DisplayPort functions into a separate module to reduce the size of the KMS helpers. Select DRM_DP_HELPER for all users of the code. To avoid naming conflicts, rename drm_dp_helper.c to drm_dp.c This change can help to reduce the size of the kernel binary. Some numbers from a x86-64 test build: Before: drm_kms_helper.ko: 447480 bytes After: drm_dp_helper.ko: 216632 bytes drm_kms_helper.ko: 239424 bytes For early-boot graphics, generic DRM drivers, such as simpledrm, require DRM KMS helpers to be built into the kernel. Generic helper functions for DisplayPort take up a significant portion of DRM KMS helper library. These functions are not used by generic drivers and can be loaded as a module. v3: * fix include statement in DRM selftests v2: * move DP helper code into dp/ (Jani) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-4-tzimmermann@suse.de
* drm: bridge: cdns-mhdp8546: Fix PM reference leak inYu Kuai2021-05-311-2/+2
| | | | | | | | | | | | | pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210531135622.3348252-1-yukuai3@huawei.com
* drm: bridge: cdns-mhdp8546: Fix inconsistent indentingJiapeng Chong2021-05-271-1/+1
| | | | | | | | | | | | | Eliminate the follow smatch warning: drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c:2143 cdns_mhdp_bridge_atomic_reset() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1621852953-51325-1-git-send-email-jiapeng.chong@linux.alibaba.com
* drm/dp: Add backpointer to drm_device in drm_dp_auxLyude Paul2021-04-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | This is something that we've wanted for a while now: the ability to actually look up the respective drm_device for a given drm_dp_aux struct. This will also allow us to transition over to using the drm_dbg_*() helpers for debug message printing, as we'll finally have a drm_device to reference for doing so. Note that there is one limitation with this - because some DP AUX adapters exist as platform devices which are initialized independently of their respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be non-NULL until drm_dp_aux_register() has been called. We make sure to point this out in the documentation for struct drm_dp_aux. v3: * Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
* drm/bridge/cdns-mhdp8546: Register DP aux channel with userspaceLyude Paul2021-04-271-1/+10
| | | | | | | | | | Just adds some missing calls to drm_dp_aux_register()/drm_dp_aux_unregister() for when we attach/detach the bridge. Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-2-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
* drm: bridge: cdns-mhdp8546: Enable HDCPParshuram Thombare2021-04-135-13/+801
| | | | | | | | | This patch enable HDCP in MHDP driver. Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1618078542-30679-1-git-send-email-pthombar@cadence.com
* drm: use getter/setter functionsJulia Lawall2021-02-101-1/+1
| | | | | | | | | Use getter and setter functions, for platform_device structures and a mipi_dsi_device structure. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210209211304.1261740-1-Julia.Lawall@inria.fr
* drm: bridge: cdns: Kconfig: Switch over dependency to ARCH_K3Nishanth Menon2020-11-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | With the integration of chip-id detection scheme in kernel[1], there is no specific need to maintain multitudes of SoC specific config options, discussed as per [2], we have deprecated the usage in other places for v5.10-rc1. Fix the missing user so that we can clean up the configs in v5.11. [1] drivers/soc/ti/k3-socinfo.c commit 907a2b7e2fc7 ("soc: ti: add k3 platforms chipid module driver") [2] https://lore.kernel.org/linux-arm-kernel/20200908112534.t5bgrjf7y3a6l2ss@akan/ Fixes: afba7e6c5fc1 ("drm: bridge: cdns-mhdp8546: Add TI J721E wrapper") Cc: Swapnil Jakhade <sjakhade@cadence.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Yuti Amonkar <yamonkar@cadence.com> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201026165441.22894-1-nm@ti.com
* drm: bridge: cdns-mhdp8546: fix compile warningTomi Valkeinen2020-10-011-3/+3
| | | | | | | | | | | | | | | | On x64 we get: drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c:751:10: warning: conversion from 'long unsigned int' to 'unsigned int' changes value from '18446744073709551613' to '4294967293' [-Woverflow] The registers are 32 bit, so fix by casting to u32. Fixes: fb43aa0acdfd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200929091918.24813-1-tomi.valkeinen@ti.com
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-15 02:27:29 +0000