summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/microchip/lan966x
Commit message (Collapse)AuthorAgeFilesLines
* net: lan966x: Remove ptp traps in case the ptp is not enabled.Horatiu Vultur2024-05-221-3/+3
| | | | | | | | | | | | | | | | Lan966x is adding ptp traps to redirect the ptp frames to the CPU such that the HW will not forward these frames anywhere. The issue is that in case ptp is not enabled and the timestamping source is et to HWTSTAMP_SOURCE_NETDEV then these traps would not be removed on the error path. Fix this by removing the traps in this case as they are not needed. Fixes: 54e1ed69c40a ("net: lan966x: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()") Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20240517135808.3025435-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: lan966x: remove debugfs directory in probe() error pathHerve Codina2024-05-161-2/+4
| | | | | | | | | | | | | | | | | A debugfs directory entry is create early during probe(). This entry is not removed on error path leading to some "already present" issues in case of EPROBE_DEFER. Create this entry later in the probe() code to avoid the need to change many 'return' in 'goto' and add the removal in the already present error path. Fixes: 942814840127 ("net: lan966x: Add VCAP debugFS support") Cc: <stable@vger.kernel.org> Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet2024-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: flower: check for unsupported control flagsAsbjørn Sloth Tønnesen2024-04-251-0/+5
| | | | | | | | | | | | | | | | | Use flow_rule_is_supp_control_flags() to reject filters with unsupported control flags. In case any unsupported control flags are masked, flow_rule_is_supp_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20240424125347.461995-4-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: flower: rename goto in lan966x_tc_flower_handler_control_usage()Asbjørn Sloth Tønnesen2024-04-251-3/+3
| | | | | | | | | | | | Rename goto label, as the error message is specific to the fragment flags. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20240424125347.461995-3-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: flower: add extack to lan966x_tc_flower_handler_control_usage()Asbjørn Sloth Tønnesen2024-04-251-1/+2
| | | | | | | | | | | | Define extack locally, to reduce line lengths and aid future users. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20240424125347.461995-2-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: Correct spelling in commentsSimon Horman2024-04-255-6/+6
| | | | | | | | | | Correct spelling in comments, as flagged by codespell. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-2-f0480542e39f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-02-151-2/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/dev.c 9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()") 723de3ebef03 ("net: free altname using an RCU callback") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") drivers/net/ethernet/renesas/ravb_main.c ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path" ) c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") net/mptcp/protocol.c bdd70eb68913 ("mptcp: drop the push_pending field") 28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * lan966x: Fix crash when adding interface under a lagHoratiu Vultur2024-02-091-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a crash when adding one of the lan966x interfaces under a lag interface. The issue can be reproduced like this: ip link add name bond0 type bond miimon 100 mode balance-xor ip link set dev eth0 master bond0 The reason is because when adding a interface under the lag it would go through all the ports and try to figure out which other ports are under that lag interface. And the issue is that lan966x can have ports that are NULL pointer as they are not probed. So then iterating over these ports it would just crash as they are NULL pointers. The fix consists in actually checking for NULL pointers before accessing something from the ports. Like we do in other places. Fixes: cabc9d49333d ("net: lan966x: Add lag support for lan966x") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206123054.3052966-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-02-011-2/+3
|\| | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: lan966x: Fix port configuration when using SGMII interfaceHoratiu Vultur2024-01-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | In case the interface between the MAC and the PHY is SGMII, then the bit GIGA_MODE on the MAC side needs to be set regardless of the speed at which it is running. Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: lan966x: debugfs: Fix showing the port keysetHoratiu Vultur2024-01-311-0/+2
|/ | | | | | | | | | | | On lan966x, it is possible to use debugfs to print different information about the VCAPs. Information like, if it is enabled, how the ports are configured, print the actual rules. The issue is that when printing how the ports are configured for IS1 lookups, it was parsing the wrong register to get this information. The fix consists in reading the correct register that contains this information. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: lan966x: remove useless code in lan966x_xtr_irq_handlerSu Hui2023-10-231-1/+0
| | | | | | | | 'err' is useless after break, remove this to save space and be more clear. Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: microchip: Convert to platform remove callback returning voidUwe Kleine-König2023-09-201-4/+2
| | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert these drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: lan966x: Fix return value check for vcap_get_rule()Ruan Jinjie2023-08-191-2/+2
| | | | | | | | | | | | As Simon Horman suggests, update vcap_get_rule() to always return an ERR_PTR() and update the error detection conditions to use IS_ERR(), so use IS_ERR() to fix the return value issue. Fixes: 72df3489fb10 ("net: lan966x: Add ptp trap rules") Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* page_pool: split types and declarations from page_pool.hYunsheng Lin2023-08-072-1/+2
| | | | | | | | | | | | | | | | | Split types and pure function declarations from page_pool.h and add them in page_page/types.h, so that C sources can include page_pool.h and headers should generally only include page_pool/types.h as suggested by jakub. Rename page_pool.h to page_pool/helpers.h to have both in one place. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com [Jakub: change microsoft/mana, fix kdoc paths in Documentation] Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: Do not check 0 for platform_get_irq_byname()Zhu Wang2023-08-041-2/+2
| | | | | | | | | | | Since platform_get_irq_byname() never returned zero, so it need not to check whether it returned zero, it returned -EINVAL or -ENXIO when failed, so we replace the return error code with the result it returned. Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'for-netdev' of ↵Jakub Kicinski2023-08-031-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Martin KaFai Lau says: ==================== pull-request: bpf-next 2023-08-03 We've added 54 non-merge commits during the last 10 day(s) which contain a total of 84 files changed, 4026 insertions(+), 562 deletions(-). The main changes are: 1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer, Daniel Borkmann 2) Support new insns from cpu v4 from Yonghong Song 3) Non-atomically allocate freelist during prefill from YiFei Zhu 4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu 5) Add tracepoint to xdp attaching failure from Leon Hwang 6) struct netdev_rx_queue and xdp.h reshuffling to reduce rebuild time from Jakub Kicinski * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits) net: invert the netdevice.h vs xdp.h dependency net: move struct netdev_rx_queue out of netdevice.h eth: add missing xdp.h includes in drivers selftests/bpf: Add testcase for xdp attaching failure tracepoint bpf, xdp: Add tracepoint to xdp attaching failure selftests/bpf: fix static assert compilation issue for test_cls_*.c bpf: fix bpf_probe_read_kernel prototype mismatch riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework libbpf: fix typos in Makefile tracing: bpf: use struct trace_entry in struct syscall_tp_t bpf, devmap: Remove unused dtab field from bpf_dtab_netdev bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry netfilter: bpf: Only define get_proto_defrag_hook() if necessary bpf: Fix an array-index-out-of-bounds issue in disasm.c net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn docs/bpf: Fix malformed documentation bpf: selftests: Add defrag selftests bpf: selftests: Support custom type and proto for client sockets bpf: selftests: Support not connecting client socket netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link ... ==================== Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * eth: add missing xdp.h includes in driversJakub Kicinski2023-08-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Handful of drivers currently expect to get xdp.h by virtue of including netdevice.h. This will soon no longer be the case so add explicit includes. Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20230803010230.1755386-2-kuba@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
* | net: remove phy_has_hwtstamp() -> phy_mii_ioctl() decision from converted ↵Vladimir Oltean2023-08-021-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers It is desirable that the new .ndo_hwtstamp_set() API gives more uniformity, less overhead and future flexibility w.r.t. the PHY timestamping behavior. Currently there are some drivers which allow PHY timestamping through the procedure mentioned in Documentation/networking/timestamping.rst. They don't do anything locally if phy_has_hwtstamp() is set, except for lan966x which installs PTP packet traps. Centralize that behavior in a new dev_set_hwtstamp_phylib() code function, which calls either phy_mii_ioctl() for the phylib PHY, or .ndo_hwtstamp_set() of the netdev, based on a single policy (currently simplistic: phy_has_hwtstamp()). Any driver converted to .ndo_hwtstamp_set() will automatically opt into the centralized phylib timestamping policy. Unconverted drivers still get to choose whether they let the PHY handle timestamping or not. Netdev drivers with integrated PHY drivers that don't use phylib presumably don't set dev->phydev, and those will always see HWTSTAMP_SOURCE_NETDEV requests even when converted. The timestamping policy will remain 100% up to them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20230801142824.1772134-13-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: lan966x: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()Vladimir Oltean2023-08-023-50/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The hardware timestamping through ndo_eth_ioctl() is going away. Convert the lan966x driver to the new API before that can be removed. After removing the timestamping logic from lan966x_port_ioctl(), the rest is equivalent to phy_do_ioctl(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20230801142824.1772134-10-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: flow_dissector: Use 64bits for used_keysRatheesh Kannoth2023-07-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As 32bits of dissector->used_keys are exhausted, increase the size to 64bits. This is base change for ESP/AH flow dissector patch. Please find patch and discussions at https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#t Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Tested-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Explicitly include correct DT includesRob Herring2023-07-271-1/+2
|/ | | | | | | | | | | | | | | | | | | The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Alex Elder <elder@linaro.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230727014944.3972546-1-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: update PCS driver to use neg_modeRussell King (Oracle)2023-06-222-4/+4
| | | | | | | | | | Update lan966x's embedded PCS driver to use neg_mode rather than the mode argument. As there is no pcs_link_up() method, this only affects the pcs_config() method. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qA8E9-00EaFl-GN@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enumVladimir Oltean2023-05-311-2/+8
| | | | | | | | | | | | | | | | | | | Inspired from struct flow_cls_offload :: cmd, in order for taprio to be able to report statistics (which is future work), it seems that we need to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) multiplexing, and pass the command as part of the common portion of the muxed structure. Since we already have an "enable" variable in tc_taprio_qopt_offload, refactor all drivers to check for "cmd" instead of "enable", and reject every other command except "replace" and "destroy" - to be future proof. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-05-251-0/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. Conflicts: net/ipv4/raw.c 3632679d9e4f ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol") c85be08fc4fa ("raw: Stop using RTO_ONLINK.") https://lore.kernel.org/all/20230525110037.2b532b83@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/freescale/fec_main.c 9025944fddfe ("net: fec: add dma_wmb to ensure correct descriptor values") 144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * lan966x: Fix unloading/loading of the driverHoratiu Vultur2023-05-231-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noticing that after a while when unloading/loading the driver and sending traffic through the switch, it would stop working. It would stop forwarding any traffic and the only way to get out of this was to do a power cycle of the board. The root cause seems to be that the switch core is initialized twice. Apparently initializing twice the switch core disturbs the pointers in the queue systems in the HW, so after a while it would stop sending the traffic. Unfortunetly, it is not possible to use a reset of the switch here, because the reset line is connected to multiple devices like MDIO, SGPIO, FAN, etc. So then all the devices will get reseted when the network driver will be loaded. So the fix is to check if the core is initialized already and if that is the case don't initialize it again. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230522120038.3749026-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: lan966x: Add support for DSCP rewriteHoratiu Vultur2023-05-183-3/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for DSCP rewrite in lan966x driver. On egress DSCP is rewritten from either classified DSCP, or frame DSCP. Classified DSCP is determined by the Analyzer Classifier on ingress, and is mapped from classified QoS class and DP level. Classification of DSCP is by default enabled for all ports. It is required that DSCP is trusted for the egress port *and* rewrite table is not empty, in order to rewrite DSCP based on classified DSCP, otherwise DSCP is always rewritten from frame DSCP. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: lan966x: Add support for PCP rewriteHoratiu Vultur2023-05-183-1/+107
| | | | | | | | | | | | | | | | | | | | | | | | Add support for rewrite of PCP and DEI value, based on QoS and DP level. The DCB rewrite table is queried for mappings between priority and PCP/DEI. The classified DP level is then encoded in the DEI bit, if a mapping for DEI exists. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: lan966x: Add support for offloading default prioHoratiu Vultur2023-05-183-0/+34
| | | | | | | | | | | | | | | | | | Add support for offloading default prio. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: lan966x: Add support for offloading dscp tableHoratiu Vultur2023-05-183-4/+89
| | | | | | | | | | | | | | | | | | Add support for offloading dscp app entries. The dscp values are global for all lan966x ports. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: lan966x: Add support for apptrustHoratiu Vultur2023-05-181-4/+114
| | | | | | | | | | | | | | | | | | Make use of set/getapptrust() to implement per-selector trust and trust order. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: lan966x: Add support for offloading pcp tableHoratiu Vultur2023-05-186-0/+172
| | | | | | | | | | | | | | | | | | | | Add support for offloading pcp app entries. Lan966x has 8 priority queues per port and for each priority it also has a drop precedence. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: lan966x: Add registers to configure PCP, DEI, DSCPHoratiu Vultur2023-05-181-0/+132
| | | | | | | | | | | | | | | | | | | | Add the registers that are needed to configure the PCP, DEI and DSCP of the switch both at ingress and also at egress. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: lan966x: Add TC support for ES0 VCAPHoratiu Vultur2023-05-101-0/+61
| | | | | | | | | | | | | | | | Enable the TC command to use the lan966x ES0 VCAP. Currently support only one action which is vlan pop, other will be added later. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: lan966x: Add ES0 VCAP keyset configuration for lan966xHoratiu Vultur2023-05-104-0/+123
| | | | | | | | | | | | | | | | Add ES0 VCAP port keyset configuration for lan966x and also update debugfs to show the keyset configuration. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: lan966x: Add ES0 VCAP modelHoratiu Vultur2023-05-101-1/+263
|/ | | | | | | | Provide ES0 (egress stage 0) VCAP model for lan966x. This provides rewriting functionality in the gress path. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* lan966x: Don't use xdp_frame when action is XDP_TXHoratiu Vultur2023-04-243-23/+28
| | | | | | | | | | | | | | | | | | | | | | When the action of an xdp program was XDP_TX, lan966x was creating a xdp_frame and use this one to send the frame back. But it is also possible to send back the frame without needing a xdp_frame, because it is possible to send it back using the page. And then once the frame is transmitted is possible to use directly page_pool_recycle_direct as lan966x is using page pools. This would save some CPU usage on this path, which results in higher number of transmitted frames. Bellow are the statistics: Frame size: Improvement: 64 ~8% 256 ~11% 512 ~8% 1000 ~0% 1500 ~0% Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230422142344.3630602-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: Fix lan966x_ifh_getHoratiu Vultur2023-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | From time to time, it was observed that the nanosecond part of the received timestamp, which is extracted from the IFH, it was actually bigger than 1 second. So then when actually calculating the full received timestamp, based on the nanosecond part from IFH and the second part which is read from HW, it was actually wrong. The issue seems to be inside the function lan966x_ifh_get, which extracts information from an IFH(which is an byte array) and returns the value in a u64. When extracting the timestamp value from the IFH, which starts at bit 192 and have the size of 32 bits, then if the most significant bit was set in the timestamp, then this bit was extended then the return value became 0xffffffff... . And the reason of this is because constants without any postfix are treated as signed longs and that is the reason why '1 << 31' becomes 0xffffffff80000000. This is fixed by adding the postfix 'ULL' to 1. Fixes: fd7627833ddf ("net: lan966x: Stop using packing library") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: lan966x: Stop using packing libraryHoratiu Vultur2023-03-192-25/+50
| | | | | | | | | | | | | | | | | | | | | When a frame is injected from CPU, it is required to create an IFH(Inter frame header) which sits in front of the frame that is transmitted. This IFH, contains different fields like destination port, to bypass the analyzer, priotity, etc. Lan966x it is using packing library to set and get the fields of this IFH. But this seems to be an expensive operations. If this is changed with a simpler implementation, the RX will be improved with ~5Mbit while on the TX is a much bigger improvement as it is required to set more fields. Below are the numbers for TX. Before: [ 5] 0.00-10.02 sec 439 MBytes 367 Mbits/sec 0 sender After: [ 5] 0.00-10.00 sec 578 MBytes 485 Mbits/sec 0 sender Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: lan966x: Don't read RX timestamp if not neededHoratiu Vultur2023-03-194-14/+15
| | | | | | | | | | | | | | | | | | | Whenever a frame was received to the CPU, the HW is timestamping the frame. In the IFH(Inter Frame Header) it is found the nanosecond part of the timestamps the SW is required to read from HW the second part. But reading the second part it seems to be a expensive operations, so so change this such to read the second part only when rx filter is enabled. Doing this change gives the RX a performance boost of ~70mbit. before: [ 5] 0.00-10.01 sec 546 MBytes 457 Mbits/sec 0 sender now: [ 5] 0.00-10.01 sec 652 MBytes 530 Mbits/sec 0 sender Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: lan966x: Change lan966x_police_del return typeHoratiu Vultur2023-03-151-11/+2
| | | | | | | | | | | | As the function always returns 0 change the return type to be void instead of int. In this way also remove a wrong message in case of error which would never happen. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230312195155.1492881-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: Add support for IS1 VCAP ethernet protocol typesHoratiu Vultur2023-03-101-8/+28
| | | | | | | | | IS1 VCAP has it's own list of supported ethernet protocol types which is different than the IS2 VCAP. Therefore separate the list of known protocol types based on the VCAP type. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: Add TC filter chaining support for IS1 and IS2 VCAPsHoratiu Vultur2023-03-101-0/+80
| | | | | | | | | Allow rules to be chained between IS1 VCAP and IS2 VCAP. Chaining between IS1 lookups or between IS2 lookups are not supported by the hardware. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: Add TC support for IS1 VCAPHoratiu Vultur2023-03-101-3/+102
| | | | | | | Enable TC command to use IS1 VCAP Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: Add IS1 VCAP keyset configuration for lan966xHoratiu Vultur2023-03-104-16/+383
| | | | | | | | Add IS1 VCAP port keyset configuration for lan966x and also update debug fs support to show the keyset configuration. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: Add IS1 VCAP modelHoratiu Vultur2023-03-101-1/+1401
| | | | | | | | Provide IS1 (ingress stage 1) VCAP model for lan966x. This provides classification actions for lan966x. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: lan966x: Fix port police support using tc-matchallHoratiu Vultur2023-03-011-1/+1
| | | | | | | | | | | | | | | | | | When the police was removed from the port, then it was trying to remove the police from the police id and not from the actual police index. The police id represents the id of the police and police index represents the position in HW where the police is situated. The port police id can be any number while the port police index is a number based on the port chip port. Fix this by deleting the police from HW that is situated at the police index and not police id. Fixes: 5390334b59a3 ("net: lan966x: Add port police support using tc-matchall") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'phy-for-6.3' of ↵Linus Torvalds2023-02-241-3/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This features a bunch of new device support, a couple of new drivers, yaml conversion and updates of a few drivers. Core support: - New devm_of_phy_optional_get() API with users and conversion New hardware support: - Mediatek MT7986 phy support - Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3 phy support, SM6350 combo phy support, SM6125 UFS PHY support amd SM8350 & SM8450 combo phy support - Qualcomm SNPS eUSB2 eUSB2 repeater drivers - Allwinner F1C100s USB PHY support - Tegra xusb support for Tegra234 Updates: - Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy - G4 mode support in Qualcomm UFS phy and support for various SoCs - Yaml conversion for Meson usb2 phy - TI Type C support for usb phy for j721 - Yaml conversion for Tegra xusb binding" * tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits) phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater phy: qcom: Add QCOM SNPS eUSB2 repeater driver dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property phy: rockchip-typec: Fix unsigned comparison with less than zero phy: rockchip-typec: fix tcphy_get_mode error case phy: qcom: snps-eusb2: Add missing headers phy: qcom-qmp-combo: Add support for SM8550 phy: qcom-qmp: Add v6 DP register offsets phy: qcom-qmp: pcs-usb: Add v6 register offsets dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible phy: qcom: Add QCOM SNPS eUSB2 driver dt-bindings: phy: Add qcom,snps-eusb2-phy schema file phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6 register offsets phy: qcom-qmp: pcs: Add v6.20 register offsets ...
| * net: lan966x: Convert to devm_of_phy_optional_get()Geert Uytterhoeven2023-02-031-3/+2
| | | | | | | | | | | | | | | | | | | | Use the new devm_of_phy_optional_get() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/993b0f4ac5b84b2b72223011614d2e821f9e7302.1674584626.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 19:22:47 +0000