1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
Binding for Texas Instruments gate clock.
This binding uses the common clock binding[1]. This clock is
quite much similar to the basic gate-clock [2], however,
it supports a number of additional features. If no register
is provided for this clock, the code assumes that a clockdomain
will be controlled instead and the corresponding hw-ops for
that is used.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
Required properties:
- compatible : shall be one of:
"ti,gate-clock" - basic gate clock
"ti,wait-gate-clock" - gate clock which waits until clock is active before
returning from clk_enable()
"ti,dss-gate-clock" - gate clock with DSS specific hardware handling
"ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
"ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
clock directly from a clockdomain, see [3] how
to map clockdomains properly
"ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
required for a hardware errata
"ti,composite-gate-clock" - composite gate clock, to be part of composite
clock
"ti,composite-no-wait-gate-clock" - composite gate clock that does not wait
for clock to be active before returning
from clk_enable()
- #clock-cells : from common clock binding; shall be set to 0
- clocks : link to phandle of parent clock
- reg : offset for register controlling adjustable gate, not needed for
ti,clkdm-gate-clock type
Optional properties:
- clock-output-names : from common clock binding.
- ti,bit-shift : bit shift for programming the clock gate, invalid for
ti,clkdm-gate-clock type
- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
gates the clock and clearing the bit ungates the clock.
Examples:
mmchs2_fck: mmchs2_fck@48004a00 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&core_96m_fck>;
reg = <0x0a00>;
ti,bit-shift = <25>;
};
uart4_fck_am35xx: uart4_fck_am35xx {
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clocks = <&core_48m_fck>;
reg = <0x0a00>;
ti,bit-shift = <23>;
};
dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 {
#clock-cells = <0>;
compatible = "ti,dss-gate-clock";
clocks = <&dpll4_m4x2_ck>;
reg = <0x0e00>;
ti,bit-shift = <0>;
};
emac_ick: emac_ick@4800259c {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
reg = <0x059c>;
ti,bit-shift = <1>;
};
emu_src_ck: emu_src_ck {
#clock-cells = <0>;
compatible = "ti,clkdm-gate-clock";
clocks = <&emu_src_mux_ck>;
};
dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 {
#clock-cells = <0>;
compatible = "ti,hsdiv-gate-clock";
clocks = <&dpll4_m2x2_mul_ck>;
ti,bit-shift = <0x1b>;
reg = <0x0d00>;
ti,set-bit-to-disable;
};
vlynq_gate_fck: vlynq_gate_fck {
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clocks = <&core_ck>;
ti,bit-shift = <3>;
reg = <0x0200>;
};
sys_clkout2_src_gate: sys_clkout2_src_gate {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
clocks = <&core_ck>;
ti,bit-shift = <15>;
reg = <0x0070>;
};
|
