1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
|
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* IPQ9574 RDP433 board device tree source
*
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
/dts-v1/;
#include "ipq9574.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
regulator_fixed_3p3: s3300 {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
regulator-name = "fixed_3p3";
};
regulator_fixed_0p925: s0925 {
compatible = "regulator-fixed";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <925000>;
regulator-boot-on;
regulator-always-on;
regulator-name = "fixed_0p925";
};
};
&blsp1_uart2 {
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
status = "okay";
};
&rpm_requests {
regulators {
compatible = "qcom,rpm-mp5496-regulators";
ipq9574_s1: s1 {
/*
* During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
* During regulator registration, kernel not knowing the initial voltage,
* considers it as zero and brings up the regulators with minimum supported voltage.
* Update the regulator-min-microvolt with SVS voltage of 725mV so that
* the regulators are brought up with 725mV which is sufficient for all the
* corner parts to operate at 800MHz
*/
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1075000>;
};
mp5496_l2: l2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
};
};
&sdhc_1 {
pinctrl-0 = <&sdc_default_state>;
pinctrl-names = "default";
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
max-frequency = <384000000>;
bus-width = <8>;
status = "okay";
};
&sleep_clk {
clock-frequency = <32000>;
};
&tlmm {
sdc_default_state: sdc-default-state {
clk-pins {
pins = "gpio5";
function = "sdc_clk";
drive-strength = <8>;
bias-disable;
};
cmd-pins {
pins = "gpio4";
function = "sdc_cmd";
drive-strength = <8>;
bias-pull-up;
};
data-pins {
pins = "gpio0", "gpio1", "gpio2",
"gpio3", "gpio6", "gpio7",
"gpio8", "gpio9";
function = "sdc_data";
drive-strength = <8>;
bias-pull-up;
};
rclk-pins {
pins = "gpio10";
function = "sdc_rclk";
drive-strength = <8>;
bias-pull-down;
};
};
};
&usb_0_dwc3 {
dr_mode = "host";
};
&usb_0_qmpphy {
vdda-pll-supply = <&mp5496_l2>;
vdda-phy-supply = <®ulator_fixed_0p925>;
status = "okay";
};
&usb_0_qusbphy {
vdd-supply = <®ulator_fixed_0p925>;
vdda-pll-supply = <&mp5496_l2>;
vdda-phy-dpdm-supply = <®ulator_fixed_3p3>;
status = "okay";
};
&usb3 {
status = "okay";
};
&xo_board_clk {
clock-frequency = <24000000>;
};
|
