1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for Motorcomm PHYs
*
* Author: Peter Geis <pgwipeout@gmail.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/phy.h>
#define PHY_ID_YT8511 0x0000010a
#define YT8511_PAGE_SELECT 0x1e
#define YT8511_PAGE 0x1f
#define YT8511_EXT_CLK_GATE 0x0c
#define YT8511_EXT_DELAY_DRIVE 0x0d
#define YT8511_EXT_SLEEP_CTRL 0x27
/* 2b00 25m from pll
* 2b01 25m from xtl *default*
* 2b10 62.m from pll
* 2b11 125m from pll
*/
#define YT8511_CLK_125M (BIT(2) | BIT(1))
#define YT8511_PLLON_SLP BIT(14)
/* RX Delay enabled = 1.8ns 1000T, 8ns 10/100T */
#define YT8511_DELAY_RX BIT(0)
/* TX Gig-E Delay is bits 7:4, default 0x5
* TX Fast-E Delay is bits 15:12, default 0xf
* Delay = 150ps * N - 250ps
* On = 2000ps, off = 50ps
*/
#define YT8511_DELAY_GE_TX_EN (0xf << 4)
#define YT8511_DELAY_GE_TX_DIS (0x2 << 4)
#define YT8511_DELAY_FE_TX_EN (0xf << 12)
#define YT8511_DELAY_FE_TX_DIS (0x2 << 12)
static int yt8511_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, YT8511_PAGE_SELECT);
};
static int yt8511_write_page(struct phy_device *phydev, int page)
{
return __phy_write(phydev, YT8511_PAGE_SELECT, page);
};
static int yt8511_config_init(struct phy_device *phydev)
{
unsigned int ge, fe;
int ret, oldpage;
/* set clock mode to 125mhz */
oldpage = phy_select_page(phydev, YT8511_EXT_CLK_GATE);
if (oldpage < 0)
goto err_restore_page;
ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M);
if (ret < 0)
goto err_restore_page;
/* set rgmii delay mode */
switch (phydev->interface) {
case PHY_INTERFACE_MODE_RGMII:
ge = YT8511_DELAY_GE_TX_DIS;
fe = YT8511_DELAY_FE_TX_DIS;
break;
case PHY_INTERFACE_MODE_RGMII_RXID:
ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_DIS;
fe = YT8511_DELAY_FE_TX_DIS;
break;
case PHY_INTERFACE_MODE_RGMII_TXID:
ge = YT8511_DELAY_GE_TX_EN;
fe = YT8511_DELAY_FE_TX_EN;
break;
case PHY_INTERFACE_MODE_RGMII_ID:
ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN;
fe = YT8511_DELAY_FE_TX_EN;
break;
default: /* leave everything alone in other modes */
break;
}
ret = __phy_modify(phydev, YT8511_PAGE, (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge);
if (ret < 0)
goto err_restore_page;
/* fast ethernet delay is in a separate page */
ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_DELAY_DRIVE);
if (ret < 0)
goto err_restore_page;
ret = __phy_modify(phydev, YT8511_PAGE, YT8511_DELAY_FE_TX_EN, fe);
if (ret < 0)
goto err_restore_page;
/* leave pll enabled in sleep */
ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_SLEEP_CTRL);
if (ret < 0)
goto err_restore_page;
ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_PLLON_SLP);
if (ret < 0)
goto err_restore_page;
err_restore_page:
return phy_restore_page(phydev, oldpage, ret);
}
static struct phy_driver motorcomm_phy_drvs[] = {
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
.name = "YT8511 Gigabit Ethernet",
.config_init = yt8511_config_init,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = yt8511_read_page,
.write_page = yt8511_write_page,
},
};
module_phy_driver(motorcomm_phy_drvs);
MODULE_DESCRIPTION("Motorcomm PHY driver");
MODULE_AUTHOR("Peter Geis");
MODULE_LICENSE("GPL");
static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
{ /* sentinal */ }
};
MODULE_DEVICE_TABLE(mdio, motorcomm_tbl);
|