diff options
Diffstat (limited to 'target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emd1.dts')
-rw-r--r-- | target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emd1.dts | 212 |
1 files changed, 0 insertions, 212 deletions
diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emd1.dts deleted file mode 100644 index bca85cf4ab..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emd1.dts +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "EnGenius EMD1"; - compatible = "engenius,emd1"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "red:wlan2g"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "blue:wlan5g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - mesh { - label = "orange:mesh"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio54", "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition7@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition8@180000 { - label = "userconfig"; - reg = <0x00180000 0x00080000>; - read-only; - }; - partition9@200000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x200000 0x01e00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMD1"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMD1"; -}; |