1 files changed, 0 insertions, 383 deletions
diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-g10.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-g10.dts
deleted file mode 100644
index 24273291cb..0000000000
--- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-g10.dts
+++ /dev/null
@@ -1,383 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064-v2.0-smb208.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	compatible = "asrock,g10", "qcom,ipq8064";
-	model = "ASRock G10";
-
-	aliases {
-		ethernet0 = &gmac1;
-		ethernet1 = &gmac0;
-
-		led-boot = &led_status_blue;
-		led-failsafe = &led_status_amber;
-		led-running = &led_status_blue;
-		led-upgrade = &led_status_amber;
-	};
-
-	chosen {
-		bootargs-override = "console=ttyMSM0,115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		/*
-		 * this is a bit misleading. Because there are about seven
-		 * multicolor LEDs connected all wired together in parallel.
-		 */
-
-		status_yellow {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_YELLOW>;
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status_amber: status_amber {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_AMBER>;
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status_blue: status_blue {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		/*
-		 * LED is declared in vendors boardfile but it's not
-		 * working and the manual doesn't mention anything
-		 * about the LED being white.
-
-		status_white {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_WHITE>;
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-		*/
-	};
-
-	i2c-gpio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		compatible = "i2c-gpio";
-		gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
-			<&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
-		i2c-gpio,delay-us = <5>;
-		i2c-gpio,scl-output-only;
-
-		mcu@50 {
-			reg = <0x50>;
-			compatible = "sonix,sn8f25e21";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		ir-remote {
-			label = "ir-remote";
-			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps5g {
-			label = "wps5g";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps2g {
-			label = "wps2g";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&gmac1 {
-	status = "okay";
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gsbi4_serial {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	switch@10 {
-		compatible = "qca,qca8337";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "cpu";
-				ethernet = <&gmac1>;
-				phy-mode = "rgmii";
-				tx-internal-delay-ps = <1000>;
-				rx-internal-delay-ps = <1000>;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "wan";
-				phy-mode = "internal";
-				phy-handle = <&phy_port1>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan1";
-				phy-mode = "internal";
-				phy-handle = <&phy_port2>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-				phy-mode = "internal";
-				phy-handle = <&phy_port3>;
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan3";
-				phy-mode = "internal";
-				phy-handle = <&phy_port4>;
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "lan4";
-				phy-mode = "internal";
-				phy-handle = <&phy_port5>;
-			};
-
-			port@6 {
-				reg = <6>;
-				label = "cpu";
-				ethernet = <&gmac2>;
-				phy-mode = "sgmii";
-				qca,sgmii-enable-pll;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy_port1: phy@0 {
-				reg = <0>;
-			};
-
-			phy_port2: phy@1 {
-				reg = <1>;
-			};
-
-			phy_port3: phy@2 {
-				reg = <2>;
-			};
-
-			phy_port4: phy@3 {
-				reg = <3>;
-			};
-
-			phy_port5: phy@4 {
-				reg = <4>;
-			};
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		nand-is-boot-medium;
-		qcom,boot-partitions = <0x0 0x1200000>;
-
-		partitions {
-			compatible = "qcom,smem-part";
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi5g: wifi@1,0 {
-			reg = <0x00010000 0 0 0 0>;
-			compatible = "qcom,ath10k";
-			qcom,ath10k-calibration-variant = "ASRock-G10";
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2g: wifi@1,0 {
-			reg = <0x00010000 0 0 0 0>;
-			compatible = "qcom,ath10k";
-			qcom,ath10k-calibration-variant = "ASRock-G10";
-		};
-	};
-};
-
-&qcom_pinmux {
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8", "gpio9", "gpio26";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	button_pins: button_pins {
-		mux {
-			pins = "gpio15", "gpio16", "gpio64", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	uart0_pins: uart0_pins {
-		mux {
-			pins = "gpio10", "gpio11";
-			function = "gsbi4";
-			drive-strength = <10>;
-			bias-disable;
-		};
-	};
-};
-
-&rpm {
-	pinctrl-0 = <&i2c4_pins>;
-	pinctrl-names = "default";
-};
-
-&hs_phy_0 {
-	status = "okay";
-};
-
-&ss_phy_0 {
-	status = "okay";
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&hs_phy_1 {
-	status = "okay";
-};
-
-&ss_phy_1 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&tcsr {
-	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
-};
-
-/delete-node/ &pcie2_pins;
-/delete-node/ &pcie2;