diff options
Diffstat (limited to 'target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts')
-rw-r--r-- | target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts | 601 |
1 files changed, 0 insertions, 601 deletions
diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts deleted file mode 100644 index 12f15bd147..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts +++ /dev/null @@ -1,601 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq8065-smb208.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Askey RT4230W REV6"; - compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x3e000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &ledctrl3; - led-failsafe = &ledctrl1; - led-running = &ledctrl2; - led-upgrade = &ledctrl3; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - ledctrl1: ledctrl1 { - label = "ledctrl1"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - ledctrl2: ledctrl2 { - label = "ledctrl2"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - ledctrl3: ledctrl3 { - label = "ledctrl3"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio54", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio22", "gpio23", "gpio24"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - rgmii2_pins: rgmii2-pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62"; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - - tx { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32"; - input-disable; - }; - }; - - spi_pins: spi_pins { - cs { - pins = "gpio20"; - drive-strength = <12>; - }; - }; -}; - -&gsbi5 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "everspin,mr25h256"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - qcom,boot-partitions = <0x0 0x1180000 0x1340000 0x10c0000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - - partition@180000 { - label = "0:SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - - partition@2c0000 { - label = "0:SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - - partition@540000 { - label = "0:DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - - partition@660000 { - label = "0:SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - - partition@780000 { - label = "0:TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - - partition@a00000 { - label = "0:RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - - partition@c80000 { - label = "0:APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - partition@1180000 { - label = "0:APPSBLENV"; - reg = <0x1180000 0x0080000>; - }; - - partition@1200000 { - label = "0:ART"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_ART_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_ART_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@1340000 { - label = "0:BOOTCONFIG"; - reg = <0x1340000 0x0060000>; - read-only; - }; - - partition@13a0000 { - label = "0:SBL2_1"; - reg = <0x13a0000 0x0140000>; - read-only; - }; - - partition@14e0000 { - label = "0:SBL3_1"; - reg = <0x14e0000 0x0280000>; - read-only; - }; - - partition@1760000 { - label = "0:DDRCONFIG_1"; - reg = <0x1760000 0x0120000>; - read-only; - }; - - partition@1880000 { - label = "0:SSD_1"; - reg = <0x1880000 0x0120000>; - read-only; - }; - - partition@19a0000 { - label = "0:TZ_1"; - reg = <0x19a0000 0x0280000>; - read-only; - }; - - partition@1c20000 { - label = "0:RPM_1"; - reg = <0x1c20000 0x0280000>; - read-only; - }; - - partition@1ea0000 { - label = "0:BOOTCONFIG1"; - reg = <0x1ea0000 0x0060000>; - read-only; - }; - - partition@1f00000 { - label = "0:APPSBL_1"; - reg = <0x1f00000 0x0500000>; - read-only; - }; - - partition@2400000 { - label = "ubi"; - reg = <0x2400000 0x1a000000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_WAN; - default-state = "keep"; - }; - }; - }; - - port@2 { - reg = <2>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@4 { - reg = <4>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@5 { - reg = <5>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - nvmem-cells = <&macaddr_ART_0>; - nvmem-cell-names = "mac-address"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <1>; - - nvmem-cells = <&macaddr_ART_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi0: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&precal_ART_1000>; - nvmem-cell-names = "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi1: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&precal_ART_5000>; - nvmem-cell-names = "pre-calibration"; - }; - }; -}; |