diff options
Diffstat (limited to 'target/linux/ipq806x/files-6.1/arch/arm')
36 files changed, 0 insertions, 12333 deletions
diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts deleted file mode 100644 index 76751910e0..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts +++ /dev/null @@ -1,743 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8062-smb208.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "NEC Platforms Aterm WG2600HP3"; - compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064"; - - memory { - device_type = "memory"; - reg = <0x42000000 0x1e000000>; - }; - - aliases { - label-mac-device = &gmac2; - - led-boot = &led_power_green; - led-failsafe = &led_power_red; - led-running = &led_power_green; - led-upgrade = &led_power_red; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&buttons_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - - mode0 { - label = "mode0"; - gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - wakeup-source; - }; - - mode1 { - label = "mode1"; - gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>; - linux,code = <BTN_1>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&leds_pins>; - pinctrl-names = "default"; - - led_power_green: power_green { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>; - }; - - led_power_red: power_red { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_RED>; - gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>; - }; - - active_green { - label = "green:active"; - gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>; - }; - - active_red { - label = "red:active"; - gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "green:wlan2g"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - wlan2g_red { - label = "red:wlan2g"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_green { - label = "green:wlan5g"; - gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g_red { - label = "red:wlan5g"; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>; - }; - - tv_green { - label = "green:tv"; - gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>; - }; - - tv_red { - label = "red:tv"; - gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>; - }; - - converter_green { - label = "green:converter"; - gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>; - }; - - converter_red { - label = "red:converter"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -/* nand_pins are used for leds_pins, empty the node - * from ipq8064.dtsi - */ -&nand_pins { - /delete-property/ disable; - /delete-property/ pullups; - /delete-property/ hold; -}; - -&qcom_pinmux { - pinctrl-0 = <&akro_pins>; - pinctrl-names = "default"; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - buttons_pins: buttons_pins { - mux { - pins = "gpio22", "gpio24", "gpio40", - "gpio41"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - leds_pins: leds_pins { - mux { - pins = "gpio14", "gpio15", "gpio35", - "gpio36", "gpio38", "gpio42", - "gpio43", "gpio46", "gpio55", - "gpio56", "gpio57", "gpio58"; - function = "gpio"; - bias-pull-down; - }; - - akro2 { - pins = "gpio15", "gpio35", "gpio38", - "gpio42", "gpio43", "gpio46", - "gpio55", "gpio56", "gpio57", - "gpio58"; - drive-strength = <2>; - }; - - akro4 { - pins = "gpio14", "gpio36"; - drive-strength = <4>; - }; - }; - - /* - * Stock firmware has the following settings, so let's do the same. - * I don't sure why these are required. - */ - akro_pins: akro_pinmux { - akro { - pins = "gpio17", "gpio26", "gpio47"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - reset { - pins = "gpio45"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-low; - }; - - gmac0_rgmii { - pins = "gpio25"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; -}; - -&gsbi5 { - status = "okay"; - qcom,mode = <GSBI_PROT_SPI>; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0000000 0x0020000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x0020000 0x0020000>; - read-only; - }; - - partition@40000 { - label = "SBL2"; - reg = <0x0040000 0x0040000>; - read-only; - }; - - partition@80000 { - label = "SBL3"; - reg = <0x0080000 0x0080000>; - read-only; - }; - - partition@100000 { - label = "DDRCONFIG"; - reg = <0x0100000 0x0010000>; - read-only; - }; - - partition@110000 { - label = "SSD"; - reg = <0x0110000 0x0010000>; - read-only; - }; - - partition@120000 { - label = "TZ"; - reg = <0x0120000 0x0080000>; - read-only; - }; - - partition@1a0000 { - label = "RPM"; - reg = <0x01a0000 0x0080000>; - read-only; - }; - - partition@220000 { - label = "APPSBL"; - reg = <0x0220000 0x0080000>; - read-only; - }; - - partition@2a0000 { - label = "APPSBLENV"; - reg = <0x02a0000 0x0010000>; - read-only; - }; - - factory: partition@2b0000 { - label = "PRODUCTDATA"; - reg = <0x02b0000 0x0030000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_factory_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_factory_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - macaddr_PRODUCTDATA_c: macaddr@c { - reg = <0xc 0x6>; - }; - - macaddr_PRODUCTDATA_12: macaddr@12 { - reg = <0x12 0x6>; - }; - }; - }; - - partition@2e0000 { - label = "ART"; - reg = <0x02e0000 0x0040000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@320000 { - label = "TP"; - reg = <0x0320000 0x0040000>; - read-only; - }; - - partition@360000 { - label = "TINY"; - reg = <0x0360000 0x0500000>; - read-only; - }; - - partition@860000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x0860000 0x17a0000>; - }; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - - qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3"; - - nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - force_gen1 = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - - ieee80211-freq-limit = <2400000 2483000>; - qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3"; - - nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WAN; - function-enumerator = <1>; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WAN; - function-enumerator = <2>; - default-state = "keep"; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WAN; - function-enumerator = <3>; - default-state = "keep"; - }; - }; - }; - - port@2 { - reg = <2>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - default-state = "keep"; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - default-state = "keep"; - }; - }; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - default-state = "keep"; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - default-state = "keep"; - }; - }; - }; - - port@4 { - reg = <4>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - default-state = "keep"; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - default-state = "keep"; - }; - }; - }; - - port@5 { - reg = <5>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - default-state = "keep"; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - default-state = "keep"; - }; - }; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - qca,sgmii-rxclk-falling-edge; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii"; - qcom,id = <1>; - mdiobus = <&mdio0>; - nvmem-cells = <&macaddr_factory_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - mdiobus = <&mdio0>; - nvmem-cells = <&macaddr_factory_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi deleted file mode 100644 index f306201754..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi +++ /dev/null @@ -1,487 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include <dt-bindings/input/input.h> - -/ { - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - ramoops@42100000 { - compatible = "ramoops"; - reg = <0x42100000 0x40000>; - record-size = <0x4000>; - console-size = <0x4000>; - ftrace-size = <0x4000>; - pmsg-size = <0x4000>; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - label-mac-device = &gmac2; - }; -}; - -&qcom_pinmux { - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - usb0_pwr_en_pin: usb0_pwr_en_pin { - mux { - pins = "gpio25"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - output-high; - }; - }; - - usb1_pwr_en_pin: usb1_pwr_en_pin { - mux { - pins = "gpio23"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - output-high; - }; - }; -}; - -&gsbi5 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - partition@40000 { - label = "SBL2"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "SBL3"; - reg = <0x60000 0x30000>; - read-only; - }; - - partition@90000 { - label = "DDRCONFIG"; - reg = <0x90000 0x10000>; - read-only; - }; - - partition@a0000 { - label = "SSD"; - reg = <0xa0000 0x10000>; - read-only; - }; - - partition@b0000 { - label = "TZ"; - reg = <0xb0000 0x30000>; - read-only; - }; - - partition@e0000 { - label = "RPM"; - reg = <0xe0000 0x20000>; - read-only; - }; - - partition@100000 { - label = "fs-uboot"; - reg = <0x100000 0x70000>; - read-only; - }; - - partition@170000 { - label = "uboot-env"; - reg = <0x170000 0x40000>; - read-only; - }; - - partition@1b0000 { - label = "radio"; - reg = <0x1b0000 0x40000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_radio_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_radio_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@1f0000 { - label = "os-image"; - reg = <0x1f0000 0x400000>; - }; - - partition@5f0000 { - label = "rootfs"; - reg = <0x5f0000 0x1900000>; - }; - - defaultmac: partition@1ef0000 { - label = "default-mac"; - reg = <0x1ef0000 0x00200>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_defaultmac_8: macaddr@8 { - compatible = "mac-base"; - reg = <0x8 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@1ef0200 { - label = "pin"; - reg = <0x1ef0200 0x00200>; - read-only; - }; - - partition@1ef0400 { - label = "product-info"; - reg = <0x1ef0400 0x0fc00>; - read-only; - }; - - partition@1f00000 { - label = "partition-table"; - reg = <0x1f00000 0x10000>; - read-only; - }; - - partition@1f10000 { - label = "soft-version"; - reg = <0x1f10000 0x10000>; - read-only; - }; - - partition@1f20000 { - label = "support-list"; - reg = <0x1f20000 0x10000>; - read-only; - }; - - partition@1f30000 { - label = "profile"; - reg = <0x1f30000 0x10000>; - read-only; - }; - - partition@1f40000 { - label = "default-config"; - reg = <0x1f40000 0x10000>; - read-only; - }; - - partition@1f50000 { - label = "user-config"; - reg = <0x1f50000 0x40000>; - read-only; - }; - - partition@1f90000 { - label = "qos-db"; - reg = <0x1f90000 0x40000>; - read-only; - }; - - partition@1fd0000 { - label = "usb-config"; - reg = <0x1fd0000 0x10000>; - read-only; - }; - - partition@1fe0000 { - label = "log"; - reg = <0x1fe0000 0x20000>; - read-only; - }; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb0_pwr_en_pin>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb1_pwr_en_pin>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_defaultmac_8 (-1)>, <&precal_radio_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_defaultmac_8 0>, <&precal_radio_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_defaultmac_8 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_defaultmac_8 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts deleted file mode 100644 index 6e4c9bc773..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts +++ /dev/null @@ -1,168 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/leds/common.h> - -#include "qcom-ipq8064-ad7200-c2600.dtsi" - -/ { - model = "TP-Link Talon AD7200"; - compatible = "tplink,ad7200", "qcom,ipq8064"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - - led_enable { - label = "led-enable"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; - linux,code = <KEY_LIGHTS_TOGGLE>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - lan { - function = LED_FUNCTION_LAN; - color = <LED_COLOR_ID_BLUE>; - gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>; - }; - - usb1 { - label = "blue:usb1"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "blue:wlan5g"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; - }; - - usb3 { - label = "blue:usb3"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "blue:wlan2g"; - gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; - }; - - wan_orange { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_ORANGE>; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - wan_blue { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_BLUE>; - gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - }; - - wlan60g { - label = "blue:wlan60g"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - led_status: status { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio53", "gpio54", "gpio67"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26", - "gpio33", "gpio55", "gpio56", "gpio66"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&mdio0 { - switch@10 { - ports { - port@1 { - label = "wan"; - }; - - port@2 { - label = "lan1"; - }; - - port@3 { - label = "lan2"; - }; - - port@4 { - label = "lan3"; - }; - - port@5 { - label = "lan4"; - }; - }; - }; -}; - -&pcie2 { - status = "okay"; - max-link-speed = <1>; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap148.dts deleted file mode 100644 index bd8f0d6019..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ /dev/null @@ -1,219 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - model = "Qualcomm Technologies, Inc. IPQ8064/AP-148"; - compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&flash { - partitions { - compatible = "qcom,smem-part"; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - /* - port@6 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - asym-pause; - }; - }; - */ - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap161.dts deleted file mode 100644 index 9d0b451f43..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap161.dts +++ /dev/null @@ -1,254 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - model = "Qualcomm IPQ8064/AP161"; - compatible = "qcom,ipq8064-ap161", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - }; -}; - -&qcom_pinmux { - rgmii2_pins: rgmii2-pins { - mux { - pins = "gpio27", "gpio28", "gpio29", - "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", - "gpio60", "gpio61", "gpio62", - "gpio2", "gpio66"; - }; - }; -}; - -&flash { - partitions { - compatible = "qcom,smem-part"; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; -}; - -&pcie2 { - status = "okay"; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - /* - port@6 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - asym-pause; - }; - }; - */ - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; - - phy3: ethernet-phy@3 { - device_type = "ethernet-phy"; - reg = <3>; - }; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-asus-onhub.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-asus-onhub.dts deleted file mode 100644 index 442bcf19a6..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-asus-onhub.dts +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2014 The ChromiumOS Authors - */ - -#include "qcom-ipq8064-onhub.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,gsbi.h> - -/ { - model = "ASUS OnHub"; - compatible = "asus,onhub", "google,arkham", "qcom,ipq8064"; -}; - -&qcom_pinmux { - ap3223_pins: ap3223_pinmux { - pins = "gpio22"; - function = "gpio"; - bias-none; - }; - - i2c7_pins: i2c7_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi7"; - }; - data { - pins = "gpio8"; - bias-disable; - }; - clk { - pins = "gpio9"; - bias-disable; - }; - }; -}; - -&gsbi7 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; -}; - -&gsbi7_i2c { - status = "okay"; - clock-frequency = <100000>; - pinctrl-0 = <&i2c7_pins>; - pinctrl-names = "default"; - - ap3223@1c { - compatible = "dynaimage,ap3223"; - reg = <0x1c>; - - pinctrl-0 = <&ap3223_pins>; - pinctrl-names = "default"; - - int-gpio = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>; - }; - - led-controller@32 { - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = /bits/ 8 <1>; - #address-cells = <1>; - #size-cells = <0>; - - led@4 { - reg = <4>; - color = <LED_COLOR_ID_GREEN>; - chan-name = "green:status"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - }; - - led@5 { - reg = <5>; - color = <LED_COLOR_ID_BLUE>; - chan-name = "blue:status"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - }; - - led@8 { - reg = <8>; - color = <LED_COLOR_ID_RED>; - chan-name = "red:status"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-c2600.dts deleted file mode 100644 index b8cb25ede0..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-c2600.dts +++ /dev/null @@ -1,126 +0,0 @@ -#include <dt-bindings/leds/common.h> - -#include "qcom-ipq8064-ad7200-c2600.dtsi" - -/ { - model = "TP-Link Archer C2600"; - compatible = "tplink,c2600", "qcom,ipq8064"; - - aliases { - led-boot = &power; - led-failsafe = &general; - led-running = &power; - led-upgrade = &general; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - - ledswitch { - label = "ledswitch"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = <KEY_LIGHTS_TOGGLE>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - lan { - function = LED_FUNCTION_LAN; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; - }; - - usb4 { - label = "white:usb_4"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb_2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_AMBER>; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - wan_white { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - general: general { - label = "white:general"; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio16", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33", - "gpio53", "gpio66"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-d7800.dts deleted file mode 100644 index 8077c3a090..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-d7800.dts +++ /dev/null @@ -1,485 +0,0 @@ -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Netgear Nighthawk X4 D7800"; - compatible = "netgear,d7800", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - rsvd@5fe00000 { - reg = <0x5fe00000 0x200000>; - reusable; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power_white; - led-failsafe = &power_amber; - led-running = &power_white; - led-upgrade = &power_amber; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb1 { - label = "white:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - power_amber: power_amber { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_AMBER>; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_white { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_AMBER>; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - power_white: power_white { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi { - label = "white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", - "gpio24","gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio16", "gpio68"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; -}; - -&sata_phy { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_art_6 1>, <&precal_art_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_art_6 2>, <&precal_art_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie2 { - status = "okay"; - reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie2_pins>; - pinctrl-names = "default"; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1180000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - qcadata@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - artbak: art@1340000 { - label = "artbak"; - reg = <0x1340000 0x0140000>; - read-only; - }; - - kernel@1480000 { - label = "kernel"; - reg = <0x1480000 0x0400000>; - }; - - ubi@1880000 { - label = "ubi"; - reg = <0x1880000 0x6080000>; - }; - - reserve@7900000 { - label = "reserve"; - reg = <0x7900000 0x0700000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_art_6 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-db149.dts deleted file mode 100644 index 063f27c6d2..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ /dev/null @@ -1,263 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - model = "Qualcomm IPQ8064/DB149"; - compatible = "qcom,ipq8064-db149", "qcom,ipq8064"; - - aliases { - serial0 = &gsbi2_serial; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; -}; - -&qcom_pinmux { - rgmii0_pins: rgmii0_pins { - mux { - pins = "gpio2", "gpio66"; - drive-strength = <8>; - bias-disable; - }; - }; -}; - -&gsbi2 { - qcom,mode = <GSBI_PROT_I2C_UART>; - status = "okay"; - - gsbi2_serial: serial@12490000 { - status = "okay"; - }; -}; - -&gsbi4 { - status = "disabled"; -}; - -&gsbi4_serial { - status = "disabled"; -}; - -&flash { - m25p,fast-read; - - partition@0 { - label = "lowlevel_init"; - reg = <0x0 0x1b0000>; - }; - - partition@1 { - label = "u-boot"; - reg = <0x1b0000 0x80000>; - }; - - partition@2 { - label = "u-boot-env"; - reg = <0x230000 0x40000>; - }; - - partition@3 { - label = "caldata"; - reg = <0x270000 0x40000>; - }; - - partition@4 { - label = "firmware"; - reg = <0x2b0000 0x1d50000>; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - /* - port@6 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - asym-pause; - }; - }; - */ - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; - - phy6: ethernet-phy@6 { - reg = <6>; - }; - - phy7: ethernet-phy@7 { - reg = <7>; - }; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - pinctrl-0 = <&rgmii0_pins>; - pinctrl-names = "default"; -}; - -&gmac1 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - phy-handle = <&phy6>; -}; - -&gmac3 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <3>; - phy-handle = <&phy7>; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts deleted file mode 100644 index 2a565cc2db..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/leds/common.h> - -#include "qcom-ipq8064-eax500.dtsi" - -/ { - model = "Linksys EA7500 V1 WiFi Router"; - compatible = "linksys,ea7500-v1", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0xe000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - /* look for root deviceblock nbr in this bootarg */ - find-rootblock = "ubi.mtd="; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio65", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&partitions { - partition@5f80000 { - label = "sysdiag"; - reg = <0x5f80000 0x100000>; - }; - - partition@6080000 { - label = "syscfg"; - reg = <0x6080000 0x1f80000>; - }; -}; - -&mdio0 { - switch@10 { - ports { - port@1 { - label = "wan"; - }; - - port@2 { - label = "lan1"; - }; - - port@3 { - label = "lan2"; - }; - - port@4 { - label = "lan3"; - }; - - port@5 { - label = "lan4"; - }; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts deleted file mode 100644 index d9155081a5..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts +++ /dev/null @@ -1,126 +0,0 @@ -#include <dt-bindings/leds/common.h> - -#include "qcom-ipq8064-eax500.dtsi" - -/ { - model = "Linksys EA8500 WiFi Router"; - compatible = "linksys,ea8500", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - wifi { - label = "green:wifi"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio65", "gpio67", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio53", "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&sata_phy { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&partitions { - partition@5f80000 { - label = "syscfg"; - reg = <0x5f80000 0x2080000>; - }; -}; - -&gmac1 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,rgmii_delay = <0>; - qcom,emulation = <0>; -}; - -/* LAN */ -&gmac2 { - qcom,phy_mdio_addr = <0>; /* none */ - qcom,poll_required = <0>; /* no polling */ - qcom,rgmii_delay = <0>; - qcom,emulation = <0>; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi deleted file mode 100644 index e5cc242419..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi +++ /dev/null @@ -1,317 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include <dt-bindings/input/input.h> - -/ { - chosen { - bootargs = "console=ttyMSM0,115200n8"; - /* append to bootargs adding the root deviceblock nbr from bootloader */ - append-rootblock = "ubi.mtd="; - }; -}; - -&qcom_pinmux { - /* eax500 routers reuse the pcie2 reset pin for switch reset pin */ - switch_reset: switch_reset_pins { - mux { - pins = "gpio63"; - function = "gpio"; - drive-strength = <12>; - bias-pull-up; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - max-link-speed = <1>; -}; - -&pcie1 { - status = "okay"; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x0c80000>; - - partitions: partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - - partition@180000 { - label = "SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - - partition@2c0000 { - label = "SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - - partition@540000 { - label = "DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - - partition@660000 { - label = "SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - - partition@780000 { - label = "TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - - partition@a00000 { - label = "RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - - art: partition@c80000 { - label = "art"; - reg = <0x0c80000 0x0140000>; - read-only; - }; - - partition@dc0000 { - label = "APPSBL"; - reg = <0x0dc0000 0x0100000>; - read-only; - }; - - partition@ec0000 { - label = "u_env"; - reg = <0x0ec0000 0x0040000>; - }; - - partition@f00000 { - label = "s_env"; - reg = <0x0f00000 0x0040000>; - }; - - partition@f40000 { - label = "devinfo"; - reg = <0x0f40000 0x0040000>; - }; - - partition@f80000 { - label = "kernel1"; - reg = <0x0f80000 0x2800000>; /* 4 MB, spill to rootfs */ - }; - - partition@1380000 { - label = "rootfs1"; - reg = <0x1380000 0x2400000>; - }; - - partition@3780000 { - label = "kernel2"; - reg = <0x3780000 0x2800000>; - }; - - partition@3b80000 { - label = "rootfs2"; - reg = <0x3b80000 0x2400000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - /* Switch from documentation require at least 10ms for reset */ - reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>; - reset-post-delay-us = <12000>; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-fap-421e.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-fap-421e.dts deleted file mode 100644 index bb66c6c808..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-fap-421e.dts +++ /dev/null @@ -1,413 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8064-smb208.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Fortinet FAP-421E"; - compatible = "fortinet,fap-421e", "qcom,ipq8064"; - - memory@42000000 { - device_type = "memory"; - reg = <0x42000000 0xe000000>; - }; - - reserved-memory { - rsvd@41200000 { - no-map; - reg = <0x41200000 0x300000>; - }; - wifi_dump@44000000 { - no-map; - reg = <0x44000000 0x600000>; - }; - }; - - aliases { - led-boot = &led_power_yellow; - led-failsafe = &led_power_yellow; - led-running = &led_power_yellow; - led-upgrade = &led_power_yellow; - label-mac-device = &gmac0; - }; - - chosen { - bootargs-override = "console=ttyMSM0,9600n8"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - eth1-amber { - label = "amber:eth1"; - gpios = <&qcom_pinmux 27 GPIO_ACTIVE_LOW>; - }; - - eth1-yellow { - label = "yellow:eth1"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - eth2-amber { - label = "amber:eth2"; - gpios = <&qcom_pinmux 29 GPIO_ACTIVE_LOW>; - }; - - eth2-yellow { - label = "yellow:eth2"; - gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>; - }; - - power-amber { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_AMBER>; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; - }; - - led_power_yellow: power-yellow { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_YELLOW>; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>; - }; - - 2g-yellow { - label = "yellow:2g"; - gpios = <&qcom_pinmux 30 GPIO_ACTIVE_LOW>; - }; - - 5g-yellow { - label = "yellow:5g"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - bias-pull-up; - drive-strength = <2>; - pins = "gpio56"; - }; - }; - - led_pins: led_pins { - mux { - bias-pull-down; - drive-strength = <2>; - function = "gpio"; - output-low; - pins = "gpio23"; - }; - }; - - rgmii2_pins: rgmii2-pins { - mux { - bias-disable; - drive-strength = <16>; - function = "rgmii2"; - pins = "gpio66"; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - uart0_pins: uart0_pins { - mux { - bias-disable; - drive-strength = <12>; - function = "gsbi7"; - pins = "gpio6", "gpio7"; - }; - }; - - usb_pwr_en_pins: usb_pwr_en_pins { - mux { - pins = "gpio22"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-low; - }; - }; -}; - -&gsbi7 { - qcom,mode = <GSBI_PROT_I2C_UART>; - - status = "okay"; -}; - -&gsbi7_serial{ - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&gsbi5 { - qcom,mode = <GSBI_PROT_SPI>; - - status = "okay"; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - m25p,fast-read; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - partition@40000 { - label = "SBL2"; - reg = <0x40000 0x40000>; - read-only; - }; - - partition@80000 { - label = "SBL3"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "DDRCONFIG"; - reg = <0x100000 0x10000>; - read-only; - }; - - partition@110000 { - label = "SSD"; - reg = <0x110000 0x10000>; - read-only; - }; - - partition@120000 { - label = "TZ"; - reg = <0x120000 0x80000>; - read-only; - }; - - partition@1a0000 { - label = "RPM"; - reg = <0x1a0000 0x80000>; - read-only; - }; - - partition@220000 { - label = "APPSBL"; - reg = <0x220000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_appsbl_7ff80: mac-address@7ff80 { - compatible = "mac-base"; - reg = <0x7ff80 0xc>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@2a0000 { - label = "APPSBLENV"; - reg = <0x2a0000 0x40000>; - }; - - partition@2e0000 { - label = "ART"; - reg = <0x2e0000 0x40000>; - read-only; - }; - - partition@320000 { - label = "kernel"; - reg = <0x320000 0x600000>; - }; - - partition@920000 { - label = "ubi"; - reg = <0x920000 0x1400000>; - }; - - partition@1d20000 { - label = "reserved"; - reg = <0x1d20000 0x260000>; - read-only; - }; - - partition@1f80000 { - label = "config"; - reg = <0x1f80000 0x80000>; - read-only; - }; - }; - }; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_appsbl_7ff80 8>; - nvmem-cell-names = "mac-address"; - }; - }; -}; - -&pcie1 { - status = "okay"; - - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_appsbl_7ff80 16>; - nvmem-cell-names = "mac-address"; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - #address-cells = <0x1>; - #size-cells = <0x0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, - <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - }; -}; - -&gmac0 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <0>; - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - nvmem-cells = <&macaddr_appsbl_7ff80 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - nvmem-cells = <&macaddr_appsbl_7ff80 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-g10.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-g10.dts deleted file mode 100644 index 24273291cb..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-g10.dts +++ /dev/null @@ -1,383 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - compatible = "asrock,g10", "qcom,ipq8064"; - model = "ASRock G10"; - - aliases { - ethernet0 = &gmac1; - ethernet1 = &gmac0; - - led-boot = &led_status_blue; - led-failsafe = &led_status_amber; - led-running = &led_status_blue; - led-upgrade = &led_status_amber; - }; - - chosen { - bootargs-override = "console=ttyMSM0,115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - /* - * this is a bit misleading. Because there are about seven - * multicolor LEDs connected all wired together in parallel. - */ - - status_yellow { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_YELLOW>; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - led_status_amber: status_amber { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_AMBER>; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - led_status_blue: status_blue { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - /* - * LED is declared in vendors boardfile but it's not - * working and the manual doesn't mention anything - * about the LED being white. - - status_white { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - */ - }; - - i2c-gpio { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "i2c-gpio"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */ - <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */ - i2c-gpio,delay-us = <5>; - i2c-gpio,scl-output-only; - - mcu@50 { - reg = <0x50>; - compatible = "sonix,sn8f25e21"; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - ir-remote { - label = "ir-remote"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps5g { - label = "wps5g"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - - wps2g { - label = "wps2g"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&gmac1 { - status = "okay"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4_serial { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1200000>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi5g: wifi@1,0 { - reg = <0x00010000 0 0 0 0>; - compatible = "qcom,ath10k"; - qcom,ath10k-calibration-variant = "ASRock-G10"; - }; - }; -}; - -&pcie1 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2g: wifi@1,0 { - reg = <0x00010000 0 0 0 0>; - compatible = "qcom,ath10k"; - qcom,ath10k-calibration-variant = "ASRock-G10"; - }; - }; -}; - -&qcom_pinmux { - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio15", "gpio16", "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - uart0_pins: uart0_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gsbi4"; - drive-strength = <10>; - bias-disable; - }; - }; -}; - -&rpm { - pinctrl-0 = <&i2c4_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&tcsr { - qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>; -}; - -/delete-node/ &pcie2_pins; -/delete-node/ &pcie2; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi deleted file mode 100644 index 5b8de27ad6..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi +++ /dev/null @@ -1,545 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2014 The ChromiumOS Authors - */ - -#include "qcom-ipq8064-smb208.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac2; - mdio-gpio0 = &mdio; - serial0 = &gsbi4_serial; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - dev { - label = "dev"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>; - linux,code = <KEY_CONFIG>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - mdio: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, - <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - }; - }; - }; - - soc { - rng@1a500000 { - status = "disabled"; - }; - - sound { - compatible = "google,storm-audio"; - qcom,model = "ipq806x-storm"; - cpu = <&lpass>; - codec = <&max98357a>; - }; - - lpass: lpass@28100000 { - status = "okay"; - pinctrl-names = "default", "idle"; - pinctrl-0 = <&mi2s_default>; - pinctrl-1 = <&mi2s_idle>; - }; - - max98357a: max98357a { - compatible = "maxim,max98357a"; - #sound-dai-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmode_pins>; - sdmode-gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - rgmii0_pins: rgmii0_pins { - mux { - pins = "gpio2", "gpio66"; - drive-strength = <8>; - bias-disable; - }; - }; - mi2s_pins { - mi2s_default: mi2s_default { - dout { - pins = "gpio32"; - function = "mi2s"; - drive-strength = <16>; - bias-disable; - }; - sync { - pins = "gpio27"; - function = "mi2s"; - drive-strength = <16>; - bias-disable; - }; - clk { - pins = "gpio28"; - function = "mi2s"; - drive-strength = <16>; - bias-disable; - }; - }; - mi2s_idle: mi2s_idle { - dout { - pins = "gpio32"; - function = "mi2s"; - drive-strength = <2>; - bias-pull-down; - }; - sync { - pins = "gpio27"; - function = "mi2s"; - drive-strength = <2>; - bias-pull-down; - }; - clk { - pins = "gpio28"; - function = "mi2s"; - drive-strength = <2>; - bias-pull-down; - }; - }; - }; - - mdio_pins: mdio_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - rst { - pins = "gpio26"; - output-low; - }; - }; - - sdmode_pins: sdmode_pinmux { - pins = "gpio25"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - - sdcc1_pins: sdcc1_pinmux { - mux { - pins = "gpio38", "gpio39", "gpio40", - "gpio41", "gpio42", "gpio43", - "gpio44", "gpio45", "gpio46", - "gpio47"; - function = "sdc1"; - }; - cmd { - pins = "gpio45"; - drive-strength = <10>; - bias-pull-up; - }; - data { - pins = "gpio38", "gpio39", "gpio40", - "gpio41", "gpio43", "gpio44", - "gpio46", "gpio47"; - drive-strength = <10>; - bias-pull-up; - }; - clk { - pins = "gpio42"; - drive-strength = <16>; - bias-pull-down; - }; - }; - - i2c1_pins: i2c1_pinmux { - pins = "gpio53", "gpio54"; - function = "gsbi1"; - bias-disable; - }; - - rpm_i2c_pinmux: rpm_i2c_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - /delete-property/ bias-none; - /delete-property/ drive-strength; - }; - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - fw_pinmux { - wp { - pins = "gpio17"; - output-low; - }; - }; - - button_pins: button_pins { - recovery { - pins = "gpio16"; - function = "gpio"; - bias-none; - }; - developer { - pins = "gpio15"; - function = "gpio"; - bias-none; - }; - }; - - spi6_pins: spi6_pins { - mux { - pins = "gpio55", "gpio56", "gpio58"; - function = "gsbi6"; - bias-pull-down; - }; - data { - pins = "gpio55", "gpio56"; - drive-strength = <10>; - }; - cs { - pins = "gpio57"; - drive-strength = <10>; - bias-pull-up; - output-high; - }; - clk { - pins = "gpio58"; - drive-strength = <12>; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - pinctrl-0 = <&rgmii0_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi1 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; -}; - -&gsbi1_i2c { - status = "okay"; - - clock-frequency = <100000>; - - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - powered-while-suspended; - }; -}; - -&gsbi4 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; -}; - -&gsbi4_serial { - status = "okay"; -}; - -&gsbi5 { - status = "okay"; - qcom,mode = <GSBI_PROT_SPI>; - - spi4: spi@1a280000 { - status = "okay"; - spi-max-frequency = <50000000>; - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - }; - }; -}; - -&gsbi6 { - status = "okay"; - qcom,mode = <GSBI_PROT_SPI>; -}; - -&gsbi6_spi { - status = "okay"; - spi-max-frequency = <25000000>; - - pinctrl-0 = <&spi6_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; - - dmas = <&adm_dma 8 0xb>, - <&adm_dma 7 0x14>; - dma-names = "rx", "tx"; - - /* - * This "spidev" was included in the manufacturer device tree. I suspect - * it's the (unused) Zigbee radio -- SiliconLabs EM3581 Zigbee? There's - * no driver or binding for this at the moment. - */ - spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <25000000>; - }; -}; - -&pcie0 { - status = "okay"; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-controller; - - ath10k@0,0 { - reg = <0 0 0 0 0>; - device_type = "pci"; - qcom,ath10k-sa-gpio = <2 3 4 0>; - qcom,ath10k-sa-gpio-func = <5 5 5 0>; - }; - }; -}; - -&pcie1 { - status = "okay"; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-controller; - - ath10k@0,0 { - reg = <0 0 0 0 0>; - device_type = "pci"; - qcom,ath10k-sa-gpio = <2 3 4 0>; - qcom,ath10k-sa-gpio-func = <5 5 5 0>; - }; - }; -}; - -&pcie2 { - status = "okay"; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-controller; - - ath10k@0,0 { - reg = <0 0 0 0 0>; - device_type = "pci"; - }; - }; -}; - -&rpm { - pinctrl-0 = <&rpm_i2c_pinmux>; - pinctrl-names = "default"; -}; - -&sdcc1 { - status = "okay"; - pinctrl-0 = <&sdcc1_pins>; - pinctrl-names = "default"; - /delete-property/ mmc-ddr-1_8v; -}; - -&tcsr { - compatible = "qcom,tcsr-ipq8064", "qcom,tcsr", "syscon"; - qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500.dts deleted file mode 100644 index c2703b05d7..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500.dts +++ /dev/null @@ -1,415 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Netgear Nighthawk X4 R7500"; - compatible = "netgear,r7500", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0xe000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power_white; - led-failsafe = &power_amber; - led-running = &power_white; - led-upgrade = &power_amber; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb1 { - label = "white:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - power_amber: power_amber { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_AMBER>; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_white { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_AMBER>; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - power_white: power_white { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi { - label = "white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", - "gpio24","gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&gsbi5 { - status = "disabled"; - - spi@1a280000 { - status = "disabled"; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1180000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - qcadata@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art: art@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - reg = <0x6 0x6>; - }; - }; - }; - - kernel@1340000 { - label = "kernel"; - reg = <0x1340000 0x0400000>; - }; - - ubi@1740000 { - label = "ubi"; - reg = <0x1740000 0x1600000>; - }; - - netgear@2d40000 { - label = "netgear"; - reg = <0x2d40000 0x0c00000>; - read-only; - }; - - reserve@3940000 { - label = "reserve"; - reg = <0x3940000 0x46c0000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_art_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&tcsr { - qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>; - compatible = "qcom,tcsr"; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts deleted file mode 100644 index 6c52d51ebc..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts +++ /dev/null @@ -1,477 +0,0 @@ -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Netgear Nighthawk X4 R7500v2"; - compatible = "netgear,r7500v2", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - rsvd@5fe00000 { - reg = <0x5fe00000 0x200000>; - reusable; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb1 { - label = "amber:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb3 { - label = "amber:usb3"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - status { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_AMBER>; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - internet { - label = "white:internet"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi { - label = "white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", - "gpio24","gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio16", "gpio68"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; -}; - -&sata_phy { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_art_6 1>, <&precal_art_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_art_6 2>, <&precal_art_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1180000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - qcadata@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - artbak: art@1340000 { - label = "artbak"; - reg = <0x1340000 0x0140000>; - read-only; - }; - - kernel@1480000 { - label = "kernel"; - reg = <0x1480000 0x0400000>; - }; - - ubi@1880000 { - label = "ubi"; - reg = <0x1880000 0x6080000>; - }; - - reserve@7900000 { - label = "reserve"; - reg = <0x7900000 0x0700000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_art_6 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-tplink-onhub.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-tplink-onhub.dts deleted file mode 100644 index 6adc6be4ae..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-tplink-onhub.dts +++ /dev/null @@ -1,209 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2014 The ChromiumOS Authors - */ - -#include "qcom-ipq8064-onhub.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,gsbi.h> - -/ { - model = "TP-Link OnHub"; - compatible = "tplink,onhub", "google,whirlwind-sp5", "qcom,ipq8064"; -}; - -&qcom_pinmux { - i2c7_pins: i2c7_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi7"; - }; - data { - pins = "gpio8"; - bias-disable; - }; - clk { - pins = "gpio9"; - bias-disable; - }; - }; -}; - -&gsbi7 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; -}; - -&gsbi7_i2c { - status = "okay"; - clock-frequency = <100000>; - pinctrl-0 = <&i2c7_pins>; - pinctrl-names = "default"; - - led-controller@32 { - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = /bits/ 8 <1>; - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - chan-name = "red:status-0"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - chan-name = "green:status-0"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_BLUE>; - chan-name = "blue:status-0"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@3 { - reg = <3>; - color = <LED_COLOR_ID_RED>; - chan-name = "red:status-1"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@4 { - reg = <4>; - color = <LED_COLOR_ID_GREEN>; - chan-name = "green:status-1"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@5 { - reg = <5>; - color = <LED_COLOR_ID_BLUE>; - chan-name = "blue:status-1"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@6 { - reg = <6>; - color = <LED_COLOR_ID_RED>; - chan-name = "red:status-2"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@7 { - reg = <7>; - color = <LED_COLOR_ID_GREEN>; - chan-name = "green:status-2"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@8 { - reg = <8>; - color = <LED_COLOR_ID_BLUE>; - chan-name = "blue:status-2"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - }; - - led-controller@33 { - compatible = "national,lp5523"; - reg = <0x33>; - clock-mode = /bits/ 8 <1>; - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - chan-name = "red:status-3"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - chan-name = "green:status-3"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_BLUE>; - chan-name = "blue:status-3"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@3 { - reg = <3>; - color = <LED_COLOR_ID_RED>; - chan-name = "red:status-4"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@4 { - reg = <4>; - color = <LED_COLOR_ID_GREEN>; - chan-name = "green:status-4"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@5 { - reg = <5>; - color = <LED_COLOR_ID_BLUE>; - chan-name = "blue:status-4"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@6 { - reg = <6>; - color = <LED_COLOR_ID_RED>; - chan-name = "red:status-5"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@7 { - reg = <7>; - color = <LED_COLOR_ID_GREEN>; - chan-name = "green:status-5"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@8 { - reg = <8>; - color = <LED_COLOR_ID_BLUE>; - chan-name = "blue:status-5"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts deleted file mode 100644 index fac41897d4..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts +++ /dev/null @@ -1,315 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Ubiquiti UniFi AC HD"; - compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064"; - - aliases { - label-mac-device = &gmac2; - led-boot = &led_dome_white; - led-failsafe = &led_dome_white; - led-running = &led_dome_blue; - led-upgrade = &led_dome_blue; - mdio-gpio0 = &mdio0; - ethernet0 = &gmac2; - ethernet1 = &gmac1; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_dome_blue: dome_blue { - label = "blue:dome"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - led_dome_white: dome_white { - label = "white:dome"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio9", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - output-low; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; - }; - - cs { - pins = "gpio20"; - drive-strength = <12>; - }; - }; -}; - -&CPU_SPC { - status = "disabled"; -}; - -&gsbi5 { - status = "okay"; - - qcom,mode = <GSBI_PROT_SPI>; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - cs-gpios = <&qcom_pinmux 20 0>; - - flash@0 { - compatible = "mx25u25635f", "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x20000 0x10000>; - read-only; - }; - - partition@30000 { - label = "SBL2"; - reg = <0x30000 0x20000>; - read-only; - }; - - partition@50000 { - label = "SBL3"; - reg = <0x50000 0x30000>; - read-only; - }; - - partition@80000 { - label = "DDRCONFIG"; - reg = <0x80000 0x10000>; - read-only; - }; - - partition@90000 { - label = "SSD"; - reg = <0x90000 0x10000>; - read-only; - }; - - partition@a0000 { - label = "TZ"; - reg = <0xa0000 0x30000>; - read-only; - }; - - partition@d0000 { - label = "RPM"; - reg = <0xd0000 0x20000>; - read-only; - }; - - partition@f0000 { - label = "APPSBL"; - reg = <0xf0000 0xc0000>; - read-only; - }; - - partition@1b0000 { - label = "APPSBLENV"; - reg = <0x1b0000 0x10000>; - read-only; - }; - - eeprom: partition@1c0000 { - label = "EEPROM"; - reg = <0x1c0000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_eeprom_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_eeprom_6: macaddr@6 { - reg = <0x6 0x6>; - }; - }; - }; - - partition@1d0000 { - label = "bootselect"; - reg = <0x1d0000 0x10000>; - }; - - partition@1e0000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x1e0000 0xe70000>; - }; - - partition@1050000 { - label = "kernel1"; - reg = <0x1050000 0xe70000>; - read-only; - }; - - partition@1ec0000 { - label = "debug"; - reg = <0x1ec0000 0x100000>; - read-only; - }; - - partition@1fc0000 { - label = "cfg"; - reg = <0x1fc0000 0x40000>; - read-only; - }; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&nand { - status = "okay"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy4: ethernet-phy@4 { - reg = <4>; - }; - - phy5: ethernet-phy@5 { - reg = <5>; - }; -}; - -&gmac1 { - status = "okay"; - - mdiobus = <&mdio0>; - phy-handle = <&phy5>; - phy-mode = "sgmii"; - qcom,id = <1>; - - nvmem-cells = <&macaddr_eeprom_6>; - nvmem-cell-names = "mac-address"; -}; - -&gmac2 { - status = "okay"; - - mdiobus = <&mdio0>; - phy-handle = <&phy4>; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_eeprom_0>; - nvmem-cell-names = "mac-address"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&tcsr { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts deleted file mode 100644 index 62530efeb1..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts +++ /dev/null @@ -1,515 +0,0 @@ -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "TP-Link Archer VR2600v"; - compatible = "tplink,vr2600v", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power; - led-failsafe = &general; - led-running = &power; - led-upgrade = &general; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - - dect { - label = "dect"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; - linux,code = <KEY_PHONE>; - debounce-interval = <60>; - wakeup-source; - }; - - ledswitch { - label = "ledswitch"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = <KEY_LIGHTS_TOGGLE>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - dsl { - label = "white:dsl"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb { - function = LED_FUNCTION_USB; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - lan { - function = LED_FUNCTION_LAN; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "white:wlan2g"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "white:wlan5g"; - gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - phone { - label = "white:phone"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - wan { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - general: general { - label = "white:general"; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17", - "gpio26", "gpio53", "gpio56", "gpio66"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; -}; - -&gsbi5 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - partition@40000 { - label = "SBL2"; - reg = <0x40000 0x40000>; - read-only; - }; - - partition@80000 { - label = "SBL3"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "DDRCONFIG"; - reg = <0x100000 0x10000>; - read-only; - }; - - partition@110000 { - label = "SSD"; - reg = <0x110000 0x10000>; - read-only; - }; - - partition@120000 { - label = "TZ"; - reg = <0x120000 0x80000>; - read-only; - }; - - partition@1a0000 { - label = "RPM"; - reg = <0x1a0000 0x80000>; - read-only; - }; - - partition@220000 { - label = "APPSBL"; - reg = <0x220000 0x80000>; - read-only; - }; - - partition@2a0000 { - label = "APPSBLENV"; - reg = <0x2a0000 0x40000>; - read-only; - }; - - partition@2e0000 { - label = "OLDART"; - reg = <0x2e0000 0x40000>; - read-only; - }; - - partition@320000 { - label = "firmware"; - reg = <0x320000 0xc60000>; - compatible = "openwrt,uimage"; - openwrt,offset = <512>; /* account for pad-extra 512 */ - }; - - /* hole 0xf80000 - 0xfaf100 */ - - partition@faf100 { - label = "default-mac"; - reg = <0xfaf100 0x00200>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_defaultmac_0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@fc0000 { - label = "ART"; - reg = <0xfc0000 0x40000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_defaultmac_0 (-1)>, <&precal_ART_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_defaultmac_0 0>, <&precal_ART_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_defaultmac_0 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_defaultmac_0 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts deleted file mode 100644 index 0afc9219c9..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts +++ /dev/null @@ -1,552 +0,0 @@ -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "NEC Aterm WG2600HP"; - compatible = "nec,wg2600hp", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - bridge { - label = "bridge"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - wakeup-source; - }; - - converter { - label = "converter"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - converter_green { - label = "green:converter"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; - }; - - power_red: power_red { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_RED>; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - active_green { - label = "green:active"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - active_red { - label = "red:active"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - power_green: power_green { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>; - }; - - converter_red { - label = "red:converter"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "green:wlan2g"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_red { - label = "red:wlan2g"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_green { - label = "green:wlan5g"; - gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_red { - label = "red:wlan5g"; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>; - }; - - tv_green { - label = "green:tv"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - tv_red { - label = "red:tv"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&CPU_SPC { - status = "disabled"; -}; - -&adm_dma { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - -switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - qca,sgmii-rxclk-falling-edge; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_PRODUCTDATA_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_PRODUCTDATA_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi5 { - status = "okay"; - - qcom,mode = <GSBI_PROT_SPI>; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - MIBIB@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - SBL2@40000 { - label = "SBL2"; - reg = <0x40000 0x40000>; - read-only; - }; - - SBL3@80000 { - label = "SBL3"; - reg = <0x80000 0x80000>; - read-only; - }; - - DDRCONFIG@100000 { - label = "DDRCONFIG"; - reg = <0x100000 0x10000>; - read-only; - }; - - SSD@110000 { - label = "SSD"; - reg = <0x110000 0x10000>; - read-only; - }; - - TZ@120000 { - label = "TZ"; - reg = <0x120000 0x80000>; - read-only; - }; - - RPM@1a0000 { - label = "RPM"; - reg = <0x1a0000 0x80000>; - read-only; - }; - - APPSBL@220000 { - label = "APPSBL"; - reg = <0x220000 0x80000>; - read-only; - }; - - APPSBLENV@2a0000 { - label = "APPSBLENV"; - reg = <0x2a0000 0x10000>; - }; - - PRODUCTDATA: PRODUCTDATA@2b0000 { - label = "PRODUCTDATA"; - reg = <0x2b0000 0x30000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_PRODUCTDATA_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_PRODUCTDATA_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - macaddr_PRODUCTDATA_c: macaddr@c { - reg = <0xc 0x6>; - }; - - macaddr_PRODUCTDATA_12: macaddr@12 { - reg = <0x12 0x6>; - }; - }; - }; - - ART@2e0000 { - label = "ART"; - reg = <0x2e0000 0x40000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - TP@320000 { - label = "TP"; - reg = <0x320000 0x40000>; - read-only; - }; - - TINY@360000 { - label = "TINY"; - reg = <0x360000 0x500000>; - read-only; - }; - - firmware@860000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x860000 0x17a0000>; - }; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio16", "gpio54", "gpio24", "gpio25"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14", - "gpio15", "gpio55", "gpio56", "gpio57", "gpio58", - "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - usb_pwr_en_pins: usb_pwr_en_pins { - mux { - pins = "gpio22"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - output-high; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts deleted file mode 100644 index 0fb7e0531d..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts +++ /dev/null @@ -1,557 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de> - * Copyright (C) 2018 Mathias Kresin <dev@kresin.me> - * All rights reserved. - */ - -#include "qcom-ipq8064-v1.0.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - compatible = "compex,wpq864", "qcom,ipq8064"; - model = "Compex WPQ864"; - - aliases { - mdio-gpio0 = &mdio0; - ethernet0 = &gmac1; - ethernet1 = &gmac0; - - led-boot = &led_pass; - led-failsafe = &led_fail; - led-running = &led_pass; - led-upgrade = &led_pass; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - rss4 { - label = "green:rss4"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - rss3 { - label = "green:rss3"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - rss2 { - label = "orange:rss2"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; - }; - - rss1 { - label = "red:rss1"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - led_pass: pass { - label = "green:pass"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - led_fail: fail { - label = "green:fail"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - usb { - function = LED_FUNCTION_USB; - color = <LED_COLOR_ID_GREEN>; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb-pcie { - label = "green:usb-pcie"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - beeper { - compatible = "gpio-beeper"; - - pinctrl-0 = <&beeper_pins>; - pinctrl-names = "default"; - - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - }; -}; - -&rpm { - pinctrl-0 = <&rpm_pins>; - pinctrl-names = "default"; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - mt29f2g08abbeah4@0 { - compatible = "qcom,nandcs"; - - reg = <0>; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1180000 0x5340000 0x10c0000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - - partition@180000 { - label = "0:SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - - partition@2c0000 { - label = "0:SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - - partition@540000 { - label = "0:DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - - partition@660000 { - label = "0:SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - - partition@780000 { - label = "0:TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - - partition@a00000 { - label = "0:RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - - partition@c80000 { - label = "0:APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - partition@1180000 { - label = "0:APPSBLENV"; - reg = <0x1180000 0x0080000>; - }; - - partition@1200000 { - label = "0:ART"; - reg = <0x1200000 0x0140000>; - }; - - partition@1340000 { - label = "ubi"; - reg = <0x1340000 0x4000000>; - }; - - partition@5340000 { - label = "0:BOOTCONFIG"; - reg = <0x5340000 0x0060000>; - }; - - partition@53a0000 { - label = "0:SBL2_1"; - reg = <0x53a0000 0x0140000>; - read-only; - }; - - partition@54e0000 { - label = "0:SBL3_1"; - reg = <0x54e0000 0x0280000>; - read-only; - }; - - partition@5760000 { - label = "0:DDRCONFIG_1"; - reg = <0x5760000 0x0120000>; - read-only; - }; - - partition@5880000 { - label = "0:SSD_1"; - reg = <0x5880000 0x0120000>; - read-only; - }; - - partition@59a0000 { - label = "0:TZ_1"; - reg = <0x59a0000 0x0280000>; - read-only; - }; - - partition@5c20000 { - label = "0:RPM_1"; - reg = <0x5c20000 0x0280000>; - read-only; - }; - - partition@5ea0000 { - label = "0:BOOTCONFIG1"; - reg = <0x5ea0000 0x0060000>; - }; - - partition@5f00000 { - label = "0:APPSBL_1"; - reg = <0x5f00000 0x0500000>; - read-only; - }; - - partition@6400000 { - label = "ubi_1"; - reg = <0x6400000 0x4000000>; - }; - - partition@a400000 { - label = "unused"; - reg = <0xa400000 0x5c00000>; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4_serial { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&flash { - compatible = "jedec,spi-nor"; -}; - -&sata_phy { - status = "disabled"; -}; - -&sata { - status = "disabled"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; - - rx_eq = <2>; - tx_deamp_3_5db = <32>; - mpll = <160>; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; - - rx_eq = <2>; - tx_deamp_3_5db = <32>; - mpll = <160>; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; -}; - -&qcom_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinctrl0 { - pcie0_pcie2_perst { - pins = "gpio3"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", - "gpio23", "gpio24", "gpio25", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - beeper_pins: beeper_pins { - mux { - pins = "gpio55"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - rpm_pins: rpm_pins { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <10>; - bias-disable; - }; - }; - - uart0_pins: uart0_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gsbi4"; - drive-strength = <10>; - bias-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi5"; - drive-strength = <10>; - bias-pull-down; - }; - - clk { - pins = "gpio21"; - function = "gsbi5"; - drive-strength = <12>; - bias-pull-down; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; -}; - -&tcsr { - qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts deleted file mode 100644 index 5807425830..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts +++ /dev/null @@ -1,622 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Buffalo WXR-2533DHP"; - compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064"; - - memory@42000000 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &power; - led-failsafe = &diag; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - /* use "ubi_rootfs" volume in "ubi" partition as rootfs */ - bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb { - function = LED_FUNCTION_USB; - color = <LED_COLOR_ID_GREEN>; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port0 &hub_port1>; - }; - - guestport { - label = "green:guestport"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - diag: diag { - label = "orange:diag"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - internet_orange { - label = "orange:internet"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - internet_white { - label = "white:internet"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wireless_orange { - label = "orange:wireless"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wireless_white { - label = "white:wireless"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - router_orange { - label = "orange:router"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; - }; - - router_white { - label = "white:router"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - power { - label = "power"; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - - eject { - label = "eject"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_EJECTCD>; - debounce-interval = <60>; - wakeup-source; - }; - - guest { - label = "guest"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - debounce-interval = <60>; - wakeup-source; - }; - - ap { - label = "ap"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>; - linux,code = <BTN_1>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - wakeup-source; - }; - - router { - label = "router"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>; - linux,code = <BTN_1>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - wakeup-source; - }; - - auto { - label = "auto"; - gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>; - linux,code = <BTN_1>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - wakeup-source; - }; - }; -}; - -&nand { - status = "okay"; - - cs@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - ubi@0 { - label = "ubi"; - reg = <0x0000000 0x4000000>; - }; - - rootfs_1@4000000 { - label = "rootfs_1"; - reg = <0x4000000 0x4000000>; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_ART_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_ART_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4_serial { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&gsbi5 { - status = "okay"; - qcom,mode = <GSBI_PROT_SPI>; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x10000>; - read-only; - }; - - MIBIB@10000 { - label = "MIBIB"; - reg = <0x10000 0x20000>; - read-only; - }; - - SBL2@30000 { - label = "SBL2"; - reg = <0x30000 0x30000>; - read-only; - }; - - SBL3@60000 { - label = "SBL3"; - reg = <0x60000 0x30000>; - read-only; - }; - - DDRCONFIG@90000 { - label = "DDRCONFIG"; - reg = <0x90000 0x10000>; - read-only; - }; - - SSD@a0000 { - label = "SSD"; - reg = <0xa0000 0x10000>; - read-only; - }; - - TZ@b0000 { - label = "TZ"; - reg = <0xb0000 0x30000>; - read-only; - }; - - RPM@e0000 { - label = "RPM"; - reg = <0xe0000 0x20000>; - read-only; - }; - - APPSBL@100000 { - label = "APPSBL"; - reg = <0x100000 0x70000>; - read-only; - }; - - APPSBLENV@170000 { - label = "APPSBLENV"; - reg = <0x170000 0x10000>; - read-only; - }; - - ART@180000 { - label = "ART"; - reg = <0x180000 0x40000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_ART_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_ART_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - macaddr_ART_18: macaddr@18 { - reg = <0x18 0x6>; - }; - - macaddr_ART_1e: macaddr@1e { - reg = <0x1e 0x6>; - }; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - BOOTCONFIG@1c0000 { - label = "BOOTCONFIG"; - reg = <0x1c0000 0x10000>; - read-only; - }; - - APPSBL_1@1d0000 { - label = "APPSBL_1"; - reg = <0x1d0000 0x70000>; - read-only; - }; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&dwc3_0 { - #address-cells = <1>; - #size-cells = <0>; - - hub_port0: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&dwc3_1 { - #address-cells = <1>; - #size-cells = <0>; - - hub_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_ART_1e>, <&precal_ART_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_ART_18>, <&precal_ART_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57", - "gpio58", "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22", - "gpio23", "gpio24", "gpio25", "gpio26", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - uart0_pins: uart0_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs{ - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - usb_pwr_en_pins: usb_pwr_en_pins { - mux{ - pins = "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - output-high; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-ac400i.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-ac400i.dts deleted file mode 100644 index 7151f8de52..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-ac400i.dts +++ /dev/null @@ -1,318 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8065-smb208.dtsi" -#include <dt-bindings/input/input.h> - -/ { - model = "Nokia AC400i"; - compatible = "nokia,ac400i", "qcom,ipq8065", "qcom,ipq8064"; - - aliases { - mdio-gpio0 = &mdio0; - ethernet0 = &gmac0; - ethernet1 = &gmac1; - - led-boot = &pwr_red; - led-failsafe = &pwr_red; - led-running = &pwr_green; - led-upgrade = &pwr_green; - }; - - chosen { - bootargs-override = " console=ttyMSM0,115200n8 ubi.mtd=ubi root=/dev/ubiblock0_2"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - 5g_red { - label = "red:5g"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>; - }; - - 5g_green { - label = "green:5g"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - 2g_red { - label = "red:2g"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - 2g_green { - label = "green:2g"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; - }; - - eth1_red { - label = "red:eth1"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_HIGH>; - }; - - eth1_green { - label = "green:eth1"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>; - }; - - eth2_red { - label = "red:eth2"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>; - }; - - eth2_green { - label = "green:eth2"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>; - }; - - ctrl_red { - label = "red:ctrl"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - }; - - ctrl_green { - label = "green:ctrl"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - pwr_red: pwr_red { - label = "red:pwr"; - gpios = <&qcom_pinmux 2 GPIO_ACTIVE_LOW>; - }; - - pwr_green: pwr_green { - label = "green:pwr"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi5"; - drive-strength = <10>; - bias-pull-down; - }; - - clk { - pins = "gpio21"; - function = "gsbi5"; - drive-strength = <12>; - bias-pull-down; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio65", "gpio64", - "gpio53", "gpio54", - "gpio68", "gpio22", - "gpio67", "gpio23", - "gpio55", "gpio56", - "gpio2", "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - -}; - -&gsbi5 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; - }; -}; - -&usb3_0 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "Nokia-AC400i"; - }; - }; -}; - -&pcie1 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "Nokia-AC400i"; - }; - }; -}; - -&mdio0 { - status = "okay"; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - -}; - -//POE -&gmac0 { - status = "okay"; - qcom,id = <0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mdiobus = <&mdio0>; - phy-handle = <&phy0>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -//LAN1 -&gmac1 { - status = "okay"; - qcom,id = <1>; - - mdiobus = <&mdio0>; - phy-handle = <&phy1>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&nand { - status = "okay"; - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - rootfs@0 { - label = "rootfs"; - reg = <0x0000000 0x4000000>; - }; - - rootfs_1@4000000 { - label = "rootfs_1"; - reg = <0x4000000 0x4000000>; - }; - - cfg@8000000 { - label = "cfg"; - reg = <0x8000000 0x8000000>; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts deleted file mode 100644 index 7d22b4f541..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts +++ /dev/null @@ -1,395 +0,0 @@ -#include "qcom-ipq8065-smb208.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "ZyXEL NBG6817"; - compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - mdio-gpio0 = &mdio0; - sdcc1 = &sdcc1; - - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1"; - append-rootblock = "root=/dev/mmcblk0p"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - internet { - label = "white:internet"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi2g { - label = "amber:wifi2g"; - gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; - }; - - /* wifi2g amber from the manual is missing */ - - wifi5g { - label = "amber:wifi5g"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - /* wifi5g amber from the manual is missing */ - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio53", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio9", "gpio26", "gpio33", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - mdio0_pins: mdio0-pins { - clk { - pins = "gpio1"; - input-disable; - }; - }; - - rgmii2_pins: rgmii2-pins { - tx { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; - input-disable; - }; - }; - - spi_pins: spi_pins { - cs { - pins = "gpio20"; - drive-strength = <12>; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio16", "gpio17"; - function = "gpio"; - drive-strength = <12>; - }; - - pwr { - pins = "gpio17"; - bias-pull-down; - output-high; - }; - - ovc { - pins = "gpio16"; - bias-pull-up; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio14", "gpio15"; - function = "gpio"; - drive-strength = <12>; - }; - - pwr { - pins = "gpio14"; - bias-pull-down; - output-high; - }; - - ovc { - pins = "gpio15"; - bias-pull-up; - }; - }; -}; - -&gsbi5 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <51200000>; - reg = <0>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <0>; - qcom,rgmii_delay = <1>; - qcom,phy_mii_type = <0>; - qcom,emulation = <0>; - qcom,irq = <255>; - mdiobus = <&mdio0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - qcom,phy_mdio_addr = <0>; /* none */ - qcom,poll_required = <0>; /* no polling */ - qcom,rgmii_delay = <0>; - qcom,phy_mii_type = <1>; - qcom,emulation = <0>; - qcom,irq = <258>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&sdcc1 { - status = "okay"; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi deleted file mode 100644 index a7f0b1dbf0..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi +++ /dev/null @@ -1,541 +0,0 @@ -#include "qcom-ipq8065-smb208.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - rsvd@5fe00000 { - reg = <0x5fe00000 0x200000>; - reusable; - }; - - ramoops@42100000 { - compatible = "ramoops"; - reg = <0x42100000 0x40000>; - record-size = <0x4000>; - console-size = <0x4000>; - ftrace-size = <0x4000>; - pmsg-size = <0x4000>; - }; - }; - - aliases { - label-mac-device = &gmac2; - - led-boot = &power_white; - led-failsafe = &power_amber; - led-running = &power_white; - led-upgrade = &power_amber; - - mdio-gpio0 = &mdio0; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds: leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - power_white: power_white { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - power_amber: power_amber { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_AMBER>; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_white { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_AMBER>; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wifi { - label = "white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_WHITE>; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", - "gpio22", "gpio23", "gpio24", - "gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - mdio0_pins: mdio0-pins { - clk { - pins = "gpio1"; - input-disable; - }; - }; - - rgmii2_pins: rgmii2-pins { - tx { - pins = "gpio27", "gpio28", "gpio29", - "gpio30", "gpio31", "gpio32"; - input-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - spi6_pins: spi6_pins { - mux { - pins = "gpio55", "gpio56", "gpio58"; - function = "gsbi6"; - bias-pull-down; - }; - - mosi { - pins = "gpio55"; - drive-strength = <12>; - }; - - miso { - pins = "gpio56"; - drive-strength = <14>; - }; - - cs { - pins = "gpio57"; - drive-strength = <12>; - bias-pull-up; - }; - - clk { - pins = "gpio58"; - drive-strength = <12>; - }; - - reset { - pins = "gpio33"; - drive-strength = <10>; - bias-pull-down; - output-high; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio16", "gpio68"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1180000>; - - partitions: partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - partition@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - partition@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art: partition@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - - macaddr_art_c: macaddr@c { - reg = <0xc 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@1340000 { - label = "artbak"; - reg = <0x1340000 0x0140000>; - read-only; - }; - - partition@1480000 { - label = "kernel"; - reg = <0x1480000 0x0400000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <0>; - qcom,rgmii_delay = <1>; - qcom,phy_mii_type = <0>; - qcom,emulation = <0>; - qcom,irq = <255>; - mdiobus = <&mdio0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_art_6 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - qcom,phy_mdio_addr = <0>; /* none */ - qcom,poll_required = <0>; /* no polling */ - qcom,rgmii_delay = <0>; - qcom,phy_mii_type = <1>; - qcom,emulation = <0>; - qcom,irq = <258>; - mdiobus = <&mdio0>; - - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&sata_phy { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi0: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&pcie1 { - status = "okay"; - - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi1: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-r7800.dts deleted file mode 100644 index 3440c52699..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-r7800.dts +++ /dev/null @@ -1,46 +0,0 @@ -#include "qcom-ipq8065-nighthawk.dtsi" - -/ { - model = "Netgear Nighthawk X4S R7800"; - compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064"; -}; - -&leds { - usb1 { - label = "white:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; -}; - -&partitions { - partition@1880000 { - label = "ubi"; - reg = <0x1880000 0x6080000>; - }; - - partition@7900000 { - label = "reserve"; - reg = <0x7900000 0x0700000>; - read-only; - }; -}; - -&wifi0 { - nvmem-cells = <&macaddr_art_6 1>, <&precal_art_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; - -&wifi1 { - nvmem-cells = <&macaddr_art_6 2>, <&precal_art_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts deleted file mode 100644 index 12f15bd147..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts +++ /dev/null @@ -1,601 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq8065-smb208.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Askey RT4230W REV6"; - compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x3e000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &ledctrl3; - led-failsafe = &ledctrl1; - led-running = &ledctrl2; - led-upgrade = &ledctrl3; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - ledctrl1: ledctrl1 { - label = "ledctrl1"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - ledctrl2: ledctrl2 { - label = "ledctrl2"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - ledctrl3: ledctrl3 { - label = "ledctrl3"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio54", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio22", "gpio23", "gpio24"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - rgmii2_pins: rgmii2-pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62"; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - - tx { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32"; - input-disable; - }; - }; - - spi_pins: spi_pins { - cs { - pins = "gpio20"; - drive-strength = <12>; - }; - }; -}; - -&gsbi5 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "everspin,mr25h256"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - qcom,boot-partitions = <0x0 0x1180000 0x1340000 0x10c0000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - - partition@180000 { - label = "0:SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - - partition@2c0000 { - label = "0:SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - - partition@540000 { - label = "0:DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - - partition@660000 { - label = "0:SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - - partition@780000 { - label = "0:TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - - partition@a00000 { - label = "0:RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - - partition@c80000 { - label = "0:APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - partition@1180000 { - label = "0:APPSBLENV"; - reg = <0x1180000 0x0080000>; - }; - - partition@1200000 { - label = "0:ART"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_ART_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_ART_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@1340000 { - label = "0:BOOTCONFIG"; - reg = <0x1340000 0x0060000>; - read-only; - }; - - partition@13a0000 { - label = "0:SBL2_1"; - reg = <0x13a0000 0x0140000>; - read-only; - }; - - partition@14e0000 { - label = "0:SBL3_1"; - reg = <0x14e0000 0x0280000>; - read-only; - }; - - partition@1760000 { - label = "0:DDRCONFIG_1"; - reg = <0x1760000 0x0120000>; - read-only; - }; - - partition@1880000 { - label = "0:SSD_1"; - reg = <0x1880000 0x0120000>; - read-only; - }; - - partition@19a0000 { - label = "0:TZ_1"; - reg = <0x19a0000 0x0280000>; - read-only; - }; - - partition@1c20000 { - label = "0:RPM_1"; - reg = <0x1c20000 0x0280000>; - read-only; - }; - - partition@1ea0000 { - label = "0:BOOTCONFIG1"; - reg = <0x1ea0000 0x0060000>; - read-only; - }; - - partition@1f00000 { - label = "0:APPSBL_1"; - reg = <0x1f00000 0x0500000>; - read-only; - }; - - partition@2400000 { - label = "ubi"; - reg = <0x2400000 0x1a000000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_WAN; - default-state = "keep"; - }; - }; - }; - - port@2 { - reg = <2>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@4 { - reg = <4>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@5 { - reg = <5>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - nvmem-cells = <&macaddr_ART_0>; - nvmem-cell-names = "mac-address"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <1>; - - nvmem-cells = <&macaddr_ART_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi0: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&precal_ART_1000>; - nvmem-cell-names = "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi1: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&precal_ART_5000>; - nvmem-cell-names = "pre-calibration"; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts deleted file mode 100644 index 8818e95e8d..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts +++ /dev/null @@ -1,524 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq8065-smb208.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Arris TR4400 v2"; - compatible = "arris,tr4400-v2", "qcom,ipq8065", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &led_status_blue; - led-failsafe = &led_status_red; - led-running = &led_status_blue; - led-upgrade = &led_status_red; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_status_red: status_red { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - led_status_blue: status_blue { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - rgmii2_pins: rgmii2-pins { - tx { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32"; - input-disable; - }; - }; - - spi_pins: spi_pins { - cs { - pins = "gpio20"; - drive-strength = <12>; - }; - }; -}; - -&gsbi5 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "everspin,mr25h256"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - qcom,boot-partitions = <0x0 0x1180000 0x5340000 0x10c0000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - partition@180000 { - label = "0:SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - partition@2c0000 { - label = "0:SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - partition@540000 { - label = "0:DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - partition@660000 { - label = "0:SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - partition@780000 { - label = "0:TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - partition@a00000 { - label = "0:RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - partition@c80000 { - label = "0:APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - partition@1180000 { - label = "0:APPSBLENV"; - reg = <0x1180000 0x0080000>; - }; - partition@1200000 { - label = "0:ART"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - stock_partition@1340000 { - label = "stock_rootfs"; - reg = <0x1340000 0x4000000>; - - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "extra"; - reg = <0x0 0x4000000>; - }; - }; - partition@5340000 { - label = "0:BOOTCONFIG"; - reg = <0x5340000 0x0060000>; - read-only; - }; - partition@53a0000 { - label = "0:SBL2_1"; - reg = <0x53a0000 0x0140000>; - read-only; - }; - partition@54e0000 { - label = "0:SBL3_1"; - reg = <0x54e0000 0x0280000>; - read-only; - }; - partition@5760000 { - label = "0:DDRCONFIG_1"; - reg = <0x5760000 0x0120000>; - read-only; - }; - partition@5880000 { - label = "0:SSD_1"; - reg = <0x5880000 0x0120000>; - read-only; - }; - partition@59a0000 { - label = "0:TZ_1"; - reg = <0x59a0000 0x0280000>; - read-only; - }; - partition@5c20000 { - label = "0:RPM_1"; - reg = <0x5c20000 0x0280000>; - read-only; - }; - partition@5ea0000 { - label = "0:BOOTCONFIG1"; - reg = <0x5ea0000 0x0060000>; - read-only; - }; - partition@5f00000 { - label = "0:APPSBL_1"; - reg = <0x5f00000 0x0500000>; - read-only; - }; - stock_partition@6400000 { - label = "stock_rootfs_1"; - reg = <0x6400000 0x4000000>; - - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fw_env"; - reg = <0x0 0x100000>; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_fw_env_0: macaddr@0 { - reg = <0x00 0x6>; - }; - macaddr_fw_env_6: macaddr@6 { - reg = <0x06 0x6>; - }; - macaddr_fw_env_c: macaddr@c { - reg = <0x0c 0x6>; - }; - macaddr_fw_env_12: macaddr@12 { - reg = <0x12 0x6>; - }; - macaddr_fw_env_18: macaddr@18 { - reg = <0x18 0x6>; - }; - }; - }; - - partition@100000 { - label = "ubi"; - reg = <0x100000 0x9b00000>; - }; - }; - stock_partition@a400000 { - label = "stock_fw_env"; - reg = <0xa400000 0x0100000>; - }; - stock_partition@a500000 { - label = "stock_config"; - reg = <0xa500000 0x0800000>; - }; - stock_partition@ad00000 { - label = "stock_PKI"; - reg = <0xad00000 0x0200000>; - }; - stock_partition@af00000 { - label = "stock_scfgmgr"; - reg = <0xaf00000 0x0100000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - }; - }; - - phy7: ethernet-phy@7 { - reg = <7>; - }; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - nvmem-cells = <&macaddr_fw_env_18>; - nvmem-cell-names = "mac-address"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <1>; - - nvmem-cells = <&macaddr_fw_env_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac3 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <3>; - phy-handle = <&phy7>; - - nvmem-cells = <&macaddr_fw_env_6>; - nvmem-cell-names = "mac-address"; -}; - -&adm_dma { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi0: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&precal_ART_1000>, <&macaddr_fw_env_12>; - nvmem-cell-names = "pre-calibration", "mac-address"; - }; - }; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi1: wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&precal_ART_5000>, <&macaddr_fw_env_c>; - nvmem-cell-names = "pre-calibration", "mac-address"; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts deleted file mode 100644 index 1d4e9d36fe..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8065-nighthawk.dtsi" - -/ { - model = "Netgear Nighthawk XR450"; - compatible = "netgear,xr450", "qcom,ipq8065", "qcom,ipq8064"; - -}; - -&leds { - usb1 { - label = "white:usb1"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb2"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; -}; - -&partitions { - partition@1880000 { - label = "ubi"; - reg = <0x1880000 0xce00000>; - }; - - partition@e680000 { - label = "reserve"; - reg = <0xe680000 0x0780000>; - read-only; - }; -}; - -&wifi0 { - nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; - -&wifi1 { - nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr500.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr500.dts deleted file mode 100644 index 9eef59eaf3..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr500.dts +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8065-nighthawk.dtsi" - -/ { - model = "Netgear Nighthawk XR500"; - compatible = "netgear,xr500", "qcom,ipq8065", "qcom,ipq8064"; - -}; - -&leds { - usb1 { - label = "white:usb1"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb2"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; -}; - -&partitions { - partition@1880000 { - label = "ubi"; - reg = <0x1880000 0xce00000>; - }; - - partition@e680000 { - label = "reserve"; - reg = <0xe680000 0x0780000>; - read-only; - }; -}; - -&wifi0 { - nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; - -&wifi1 { - nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ap3935.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ap3935.dts deleted file mode 100644 index 0c865ef7c7..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ap3935.dts +++ /dev/null @@ -1,358 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8064-v2.0.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Extreme Networks AP3935"; - compatible = "extreme,ap3935", "qcom,ipq8064"; - - memory@0 { - reg = <0x41400000 0x3ec00000>; - device_type = "memory"; - }; - - aliases { - serial0 = &gsbi7_serial; - serial1 = &gsbi2_serial; - mdio-gpio0 = &mdio0; - ethernet0 = &gmac0; - ethernet1 = &gmac2; - - led-boot = &led_power_green; - led-failsafe = &led_power_orange; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - chosen { - stdout-path = "serial0:115200n8"; - bootargs-override = "ubi.block=0,0 root=/dev/ubiblock0_0"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power_green: power_green { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>; - }; - - led_power_orange: power_orange { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_ORANGE>; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>; - }; - - led_wlan2g_green { - label = "green:wlan2g"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - led_wlan5g_green { - label = "green:wlan5g"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - led_lan1_green { - label = "green:lan1"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - led_lan1_orange { - label = "orange:lan1"; - gpios = <&qcom_pinmux 27 GPIO_ACTIVE_LOW>; - }; - - led_lan2_green { - label = "green:lan2"; - gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>; - }; - - led_lan2_orange { - label = "orange:lan2"; - gpios = <&qcom_pinmux 29 GPIO_ACTIVE_LOW>; - }; - }; -}; - - -&qcom_pinmux { - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi5"; - drive-strength = <10>; - bias-pull-down; - }; - - clk { - pins = "gpio21"; - function = "gsbi5"; - drive-strength = <12>; - bias-pull-down; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio22", "gpio23", "gpio24", "gpio25", - "gpio26", "gpio27", "gpio28", "gpio29"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio56"; - function = "gpio"; - bias-pull-up; - }; - }; -}; - -&gsbi2 { - qcom,mode = <GSBI_PROT_I2C_UART>; - status = "okay"; - - gsbi2_serial: serial@12490000 { - status = "okay"; - }; -}; - -&gsbi4 { - qcom,mode = <GSBI_PROT_I2C_UART>; - status = "okay"; - - serial@16340000 { - status = "disabled"; - }; -}; - -&gsbi7 { - qcom,mode = <GSBI_PROT_I2C_UART>; - status = "okay"; - - gsbi7_serial: serial@16640000 { - status = "okay"; - }; -}; - -&gsbi5 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - cfg1@2a0000 { - compatible = "u-boot,env-redundant-bool"; - label = "CFG1"; - reg = <0x2a0000 0x0010000>; - - ethaddr: ethaddr { - #nvmem-cell-cells = <1>; - }; - }; - - bootpri@2b0000 { - label = "BootPRI"; - reg = <0x2b0000 0x0080000>; - }; - - cfg2@330000 { - label = "CFG2"; - reg = <0x330000 0x0010000>; - }; - - fs@340000 { - label = "FS"; - reg = <0x340000 0x0080000>; - }; - - priimg@3c0000 { - label = "PriImg"; - reg = <0x3c0000 0x0e10000>; - }; - - secimg@11d0000 { - label = "SecImg"; - reg = <0x11d0000 0x0e10000>; - }; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&pcie1 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - compatible = "qcom,nandcs"; - - reg = <0>; - - nand-ecc-strength = <8>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - ubi@0 { - label = "ubi"; - reg = <0x0000000 0x20000000>; - }; - }; - }; -}; - -&soc { - mdio1: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - }; - }; -}; - -&gmac0 { - status = "okay"; - - qcom,id = <0>; - mdiobus = <&mdio1>; - - phy-mode = "rgmii"; - phy-handle = <&phy1>; - - nvmem-cells = <ðaddr 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - qcom,id = <2>; - mdiobus = <&mdio1>; - - phy-mode = "sgmii"; - phy-handle = <&phy2>; - - nvmem-cells = <ðaddr 1>; - nvmem-cell-names = "mac-address"; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi deleted file mode 100644 index a8f43591f9..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi +++ /dev/null @@ -1,236 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -/ { - memory { - device_type = "memory"; - linux,usable-memory = <0x41500000 0x1ea00000>; - reg = <0x40000000 0x20000000>; - }; - - cpus { - idle-states { - CPU_SPC: spc { - status = "disabled"; - }; - }; - }; - - chosen { - bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art"; - }; -}; - -&qcom_pinmux { - mdio0_pins_active: mdio0_pins_active { - mux { - pins = "gpio0", "gpio1"; - function = "mdio"; - drive-strength = <2>; - bias-pull-down; - output-low; - }; - - clk { - pins = "gpio1"; - input-disable; - }; - }; - - phy_active: phy_active { - phy { - pins = "gpio6", "gpio7"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - output-high; - }; - }; - - uart1_pins: uart1_pins { - mux { - pins = "gpio51", "gpio52"; - function = "gsbi1"; - drive-strength = <4>; - bias-disable; - }; - }; -}; - -&gsbi1 { - status = "okay"; - qcom,mode = <GSBI_PROT_UART_W_FC>; - - serial@12450000 { - status = "okay"; - - pinctrl-0 = <&uart1_pins>; - pinctrl-names = "default"; - }; -}; - -&pcie0 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x0 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi0: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x10000 0 0 0 0>; - }; - }; -}; - -&pcie1 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x0 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi1: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x10000 0 0 0 0>; - }; - }; -}; - -&pcie2 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x0 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x10000 0 0 0 0>; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&nand { - status = "okay"; - - nand@0 { - compatible = "qcom,nandcs"; - - reg = <0>; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x2140000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x140000>; - read-only; - }; - - partition@180000 { - label = "sbl2"; - reg = <0x180000 0x140000>; - read-only; - }; - - partition@2c0000 { - label = "sbl3"; - reg = <0x2c0000 0x280000>; - read-only; - }; - - partition@540000 { - label = "ddrconfig"; - reg = <0x540000 0x120000>; - read-only; - }; - - partition@660000 { - label = "ssd"; - reg = <0x660000 0x120000>; - read-only; - }; - - partition@780000 { - label = "tz"; - reg = <0x780000 0x280000>; - read-only; - }; - - partition@a00000 { - label = "rpm"; - reg = <0xa00000 0x280000>; - read-only; - }; - - partition@1fc0000 { - label = "u-boot"; - reg = <0x1fc0000 0x180000>; - read-only; - }; - - partition@21c0000 { - label = "bootkernel1"; - reg = <0x21c0000 0xa80000>; - }; - - partition@2c40000 { - label = "bootkernel2"; - reg = <0x2c40000 0xa80000>; - }; - - partition@36c0000 { - label = "ubi"; - reg = <0x36c0000 0x46c0000>; - }; - - partition@7d80000 { - label = "art"; - reg = <0x7d80000 0x200000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts deleted file mode 100644 index 9f6c5fb696..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts +++ /dev/null @@ -1,332 +0,0 @@ -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Edgecore ECW5410"; - compatible = "edgecore,ecw5410", "qcom,ipq8064"; - - reserved-memory { - nss@40000000 { - reg = <0x40000000 0x1000000>; - no-map; - }; - - smem: smem@41000000 { - reg = <0x41000000 0x200000>; - no-map; - }; - - wifi_dump@44000000 { - reg = <0x44000000 0x600000>; - no-map; - }; - }; - - cpus { - idle-states { - CPU_SPC: spc { - status = "disabled"; - }; - }; - }; - - aliases { - serial1 = &gsbi1_serial; - ethernet0 = &gmac2; - ethernet1 = &gmac3; - - led-boot = &led_power_green; - led-failsafe = &led_power_red; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - chosen { - bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power_green: power_green { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "green:wlan2g"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>; - }; - - wlan2g_yellow { - label = "yellow:wlan2g"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; - }; - - wlan5g_green { - label = "green:wlan5g"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - led_power_red: power_red { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_RED>; - gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>; - }; - - wlan5g_yellow { - label = "yellow:wlan5g"; - gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>; - }; - }; -}; - - -&qcom_pinmux { - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi5"; - drive-strength = <10>; - bias-pull-down; - }; - - clk { - pins = "gpio21"; - function = "gsbi5"; - drive-strength = <12>; - bias-pull-down; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio16", "gpio23", "gpio24", "gpio26", - "gpio28", "gpio59"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio25"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - uart1_pins: uart1_pins { - mux { - pins = "gpio51", "gpio52", "gpio53", "gpio54"; - function = "gsbi1"; - drive-strength = <12>; - bias-none; - }; - }; -}; - -&gsbi1 { - qcom,mode = <GSBI_PROT_UART_W_FC>; - status = "okay"; - - serial@12450000 { - status = "okay"; - - pinctrl-0 = <&uart1_pins>; - pinctrl-names = "default"; - }; -}; - -&gsbi5 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L"; - }; - }; -}; - -&pcie2 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L"; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - compatible = "qcom,nandcs"; - - reg = <0>; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - rootfs1@0 { - label = "rootfs1"; - reg = <0x0000000 0x4000000>; - }; - - rootfs2@4000000 { - label = "rootfs2"; - reg = <0x4000000 0x4000000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&gmac2 { - status = "okay"; - - qcom,id = <2>; - mdiobus = <&mdio0>; - - phy-mode = "sgmii"; - phy-handle = <&phy1>; -}; - -&gmac3 { - status = "okay"; - - qcom,id = <3>; - mdiobus = <&mdio0>; - - phy-mode = "sgmii"; - phy-handle = <&phy0>; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr42.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr42.dts deleted file mode 100644 index 7ec11de56b..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr42.dts +++ /dev/null @@ -1,233 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq8068-cryptid-common.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Meraki MR42"; - compatible = "meraki,mr42", "qcom,ipq8064"; - - aliases { - serial1 = &gsbi1_serial; - ethernet0 = &gmac3; - - led-boot = &led_active; - led-failsafe = &led_power; - led-running = &led_active; - led-upgrade = &led_active; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_ORANGE>; - gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>; - }; - - led_active: active { - label = "white:active"; - gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gmac3 { - status = "okay"; - - qcom,id = <3>; - mdiobus = <&mdio0>; - - phy-mode = "sgmii"; - phy-handle = <&phy2>; - - nvmem-cells = <&mac_address 0>; - nvmem-cell-names = "mac-address"; -}; - -&gsbi2 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; -}; - -&gsbi2_i2c { - status = "okay"; - - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - ina2xx@40 { - compatible = "ina219"; - shunt-resistor = <40000>; - reg = <0x40>; - }; - - eeprom@56 { - compatible = "atmel,24c64"; - pagesize = <32>; - reg = <0x56>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - mac_address: mac-address@66 { - compatible = "mac-base"; - reg = <0x66 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; -}; - -&gsbi6 { - qcom,mode = <GSBI_PROT_I2C>; - status = "okay"; -}; - -&gsbi6_i2c { - status = "okay"; - - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - tlc591xx@40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,tlc59108"; - reg = <0x40>; - - red@0 { - label = "red:user"; - reg = <0x0>; - }; - - green@1 { - label = "green:user"; - reg = <0x1>; - }; - - blue@2 { - label = "blue:user"; - reg = <0x2>; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins_active>, <&phy_active>; - pinctrl-names = "default"; - - phy2: ethernet-phy2 { - reg = <2>; - - reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - reset-assert-us = <24000>; - - eee-broken-100tx; - eee-broken-1000t; - }; -}; - -&qcom_pinmux { - i2c0_pins: i2c0_pins { - mux { - pins = "gpio24", "gpio25"; - function = "gsbi2"; - drive-strength = <2>; - bias-pull-up; - input; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c1_pins: i2c1_pins { - mux { - pins = "gpio29", "gpio30"; - function = "gsbi6"; - drive-strength = <2>; - bias-pull-up; - input; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio31", "gpio32"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-low; - }; - }; -}; - -&wifi0 { - nvmem-cells = <&mac_address 1>; - nvmem-cell-names = "mac-address"; -}; - -&wifi1 { - nvmem-cells = <&mac_address 2>; - nvmem-cell-names = "mac-address"; -}; - -&wifi2 { - nvmem-cells = <&mac_address 3>; - nvmem-cell-names = "mac-address"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr52.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr52.dts deleted file mode 100644 index 7512bfb74f..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr52.dts +++ /dev/null @@ -1,258 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq8068-cryptid-common.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Meraki MR52"; - compatible = "meraki,mr52", "qcom,ipq8064"; - - aliases { - serial1 = &gsbi1_serial; - mdio-gpio0 = &mdio_gpio0; - ethernet0 = &gmac2; - ethernet1 = &gmac3; - - led-boot = &led_active; - led-failsafe = &led_power; - led-running = &led_active; - led-upgrade = &led_active; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_ORANGE>; - gpios = <&qcom_pinmux 19 GPIO_ACTIVE_HIGH>; - }; - - lan2_green { - label = "green:lan2"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - lan1_green { - label = "green:lan1"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - led_active: active { - label = "white:active"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - lan2_orange { - label = "orange:lan2"; - gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>; - }; - - lan1_orange { - label = "orange:lan1"; - gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gmac2 { - status = "okay"; - - qcom,id = <2>; - mdiobus = <&mdio0>; - - phy-mode = "sgmii"; - phy-handle = <&phy0>; - - nvmem-cells = <&mac_address 0>; - nvmem-cell-names = "mac-address"; -}; - -&gmac3 { - status = "okay"; - - qcom,id = <3>; - mdiobus = <&mdio_gpio0>; - - phy-mode = "sgmii"; - phy-handle = <&phy4>; - - nvmem-cells = <&mac_address 1>; - nvmem-cell-names = "mac-address"; -}; - -&gsbi7 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; -}; - -&gsbi7_i2c { - status = "okay"; - - pinctrl-0 = <&i2c_pins>; - pinctrl-names = "default"; - - ina2xx@45 { - compatible = "ina219"; - shunt-resistor = <80000>; - reg = <0x45>; - }; - - tlc591xx@49 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,tlc59108"; - reg = <0x49>; - - red@0 { - label = "red:user"; - reg = <0x0>; - }; - - green@1 { - label = "green:user"; - reg = <0x1>; - }; - - blue@2 { - label = "blue:user"; - reg = <0x2>; - }; - }; - - eeprom@52 { - compatible = "atmel,24c64"; - pagesize = <32>; - reg = <0x52>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - mac_address: mac-address@66 { - compatible = "mac-base"; - reg = <0x66 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; -}; - -&qcom_pinmux { - i2c_pins: i2c_pins { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi7"; - drive-strength = <2>; - bias-pull-up; - input; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio19", "gpio26"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-low; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio25"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - input; - }; - }; -}; - -&soc { - mdio_gpio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - pinctrl-0 = <&mdio0_pins_active>, <&phy_active>; - pinctrl-names = "default"; - - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH - &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - - phy0: ethernet-phy0 { - reg = <0>; - reset-gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>; - reset-assert-us = <24000>; - }; - - phy4: ethernet-phy4 { - reg = <4>; - reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - reset-assert-us = <24000>; - }; - }; -}; - -&wifi0 { - nvmem-cells = <&mac_address 4>; - nvmem-cell-names = "mac-address"; -}; - -&wifi1 { - nvmem-cells = <&mac_address 3>; - nvmem-cell-names = "mac-address"; -}; - -&wifi2 { - nvmem-cells = <&mac_address 2>; - nvmem-cell-names = "mac-address"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; |