diff options
Diffstat (limited to 'target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts')
-rw-r--r-- | target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts deleted file mode 100644 index 1a6594e3cd..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for ESPRESSObin-Ultra - * Copyright (C) 2019 Globalscale technologies, Inc. - * - * Jason Hung <jhung@globalscaletechnologies.com> - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include "armada-372x.dtsi" - -/ { - model = "Globalscale Marvell ESPRESSOBin Ultra Board"; - compatible = "globalscale,espressobin-ultra", "marvell,armada3720", - "marvell,armada3710"; - - aliases { - /* for dsa slave device */ - ethernet1 = &switch0port1; - ethernet2 = &switch0port2; - ethernet3 = &switch0port3; - ethernet4 = &switch0port4; - ethernet5 = &switch0port5; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - reg_usb3_vbus: usb3-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb3-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>; - }; - - usb3_phy: usb3-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <®_usb3_vbus>; - }; - - leds { - pinctrl-names = "default"; - compatible = "gpio-leds"; - /* No assigned functions to the LEDs by default */ - led1 { - label = "ebin-ultra:blue:led1"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - led2 { - label = "ebin-ultra:green:led2"; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - led3 { - label = "ebin-ultra:red:led3"; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - }; - led4 { - label = "ebin-ultra:yellow:led4"; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&pcie0 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&sdhci0 { - status = "okay"; - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <108000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x3e0000>; - }; - partition@3e0000 { - label = "hw-info"; - reg = <0x3e0000 0x10000>; - read-only; - }; - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -&uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; -}; - -&i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - clock-frequency = <100000>; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&usb3 { - status = "okay"; - usb-phy = <&usb3_phy>; -}; - -&usb2 { - status = "okay"; -}; - -ð0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&mdio { - status = "okay"; - - extphy: ethernet-phy@0 { - reg = <1>; - }; - - switch0: switch0@1 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - dsa,member = <0 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - switch0port0: port@0 { - reg = <0>; - ethernet = <ð0>; - }; - - switch0port1: port@1 { - reg = <1>; - label = "lan0"; - phy-handle = <&switch0phy1>; - }; - - switch0port2: port@2 { - reg = <2>; - label = "lan1"; - phy-handle = <&switch0phy2>; - }; - - switch0port3: port@3 { - reg = <3>; - label = "lan2"; - phy-handle = <&switch0phy3>; - }; - - switch0port4: port@4 { - reg = <4>; - label = "lan3"; - phy-handle = <&switch0phy4>; - }; - - switch0port5: port@5 { - reg = <5>; - label = "wan"; - phy-handle = <&extphy>; - phy-mode = "sgmii"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy1: switch0phy1@11 { - reg = <0x11>; - }; - switch0phy2: switch0phy2@12 { - reg = <0x12>; - }; - switch0phy3: switch0phy3@13 { - reg = <0x13>; - }; - switch0phy4: switch0phy4@14 { - reg = <0x14>; - }; - }; - }; -}; |