diff options
Diffstat (limited to 'target/linux')
59 files changed, 1 insertions, 10749 deletions
diff --git a/target/linux/mvebu/Makefile b/target/linux/mvebu/Makefile index 26bd4d4240..b279d818ed 100644 --- a/target/linux/mvebu/Makefile +++ b/target/linux/mvebu/Makefile @@ -9,8 +9,7 @@ BOARDNAME:=Marvell EBU Armada FEATURES:=fpu usb pci pcie gpio nand squashfs ramdisk boot-part rootfs-part legacy-sdcard targz SUBTARGETS:=cortexa9 cortexa53 cortexa72 -KERNEL_PATCHVER:=6.1 -KERNEL_TESTING_PATCHVER:=6.6 +KERNEL_PATCHVER:=6.6 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/mvebu/config-6.1 b/target/linux/mvebu/config-6.1 deleted file mode 100644 index 88e5fff4d9..0000000000 --- a/target/linux/mvebu/config-6.1 +++ /dev/null @@ -1,447 +0,0 @@ -CONFIG_AHCI_MVEBU=y -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MVEBU=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARMADA_370_CLK=y -CONFIG_ARMADA_370_XP_IRQ=y -CONFIG_ARMADA_370_XP_TIMER=y -# CONFIG_ARMADA_37XX_WATCHDOG is not set -CONFIG_ARMADA_38X_CLK=y -CONFIG_ARMADA_THERMAL=y -CONFIG_ARMADA_XP_CLK=y -CONFIG_ARM_APPENDED_DTB=y -# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set -# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GLOBAL_TIMER=y -CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1 -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_MVEBU_V7_CPUIDLE=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_ATA=y -CONFIG_ATAGS=y -CONFIG_ATA_LEDS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NVME=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_FEROCEON_L2 is not set -CONFIG_CACHE_L2X0=y -CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y -CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" -CONFIG_CC_NO_ARRAY_BOUNDS=y -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONTEXT_TRACKING=y -CONFIG_CONTEXT_TRACKING_IDLE=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PJ4B=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_AES_ARM=y -CONFIG_CRYPTO_AES_ARM_BS=y -CONFIG_CRYPTO_AUTHENC=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CRC32=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_MARVELL=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRYPTO_ESSIV=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_DES=y -CONFIG_CRYPTO_LIB_SHA1=y -CONFIG_CRYPTO_LIB_UTILS=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA1_ARM=y -CONFIG_CRYPTO_SHA1_ARM_NEON=y -CONFIG_CRYPTO_SHA256_ARM=y -CONFIG_CRYPTO_SHA512_ARM=y -CONFIG_CRYPTO_SIMD=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_ALIGN_RODATA=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MVEBU_UART0=y -# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set -# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set -CONFIG_DEBUG_UART_8250=y -CONFIG_DEBUG_UART_8250_SHIFT=2 -CONFIG_DEBUG_UART_PHYS=0xd0012000 -CONFIG_DEBUG_UART_VIRT=0xfec12000 -CONFIG_DEBUG_USER=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_ENGINE_RAID=y -CONFIG_DMA_OF=y -CONFIG_DMA_OPS=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EXCLUSIVE_SYSTEM_RAM=y -CONFIG_EXT4_FS=y -CONFIG_EXTCON=y -CONFIG_F2FS_FS=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_FW_LOADER_SYSFS=y -CONFIG_GCC11_NO_ARRAY_BOUNDS=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_GLOB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_PCA953X=y -CONFIG_GPIO_PCA953X_IRQ=y -CONFIG_GRO_CELLS=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_HOTPLUG_CPU=y -CONFIG_HWBM=y -CONFIG_HWMON=y -CONFIG_HW_RANDOM=y -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MV64XXX=y -# CONFIG_I2C_PXA is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -# CONFIG_IWMMXT is not set -CONFIG_JBD2=y -CONFIG_KMAP_LOCAL=y -CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_PCA963X=y -CONFIG_LEDS_TLC591XX=y -CONFIG_LEDS_TRIGGER_DISK=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_ARMADA_370=y -# CONFIG_MACH_ARMADA_375 is not set -CONFIG_MACH_ARMADA_38X=y -# CONFIG_MACH_ARMADA_39X is not set -CONFIG_MACH_ARMADA_XP=y -# CONFIG_MACH_DOVE is not set -CONFIG_MACH_MVEBU_ANY=y -CONFIG_MACH_MVEBU_V7=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MANGLE_BOOTARGS=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MDIO_I2C=y -CONFIG_MEMFD_CREATE=y -CONFIG_MEMORY=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_MVSDIO=y -CONFIG_MMC_SDHCI=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MMC_SDHCI_PXAV3=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_NAND_MARVELL=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_MVEBU_CLK_COMMON=y -CONFIG_MVEBU_CLK_COREDIV=y -CONFIG_MVEBU_CLK_CPU=y -CONFIG_MVEBU_DEVBUS=y -CONFIG_MVEBU_MBUS=y -CONFIG_MVMDIO=y -CONFIG_MVNETA=y -CONFIG_MVNETA_BM=y -CONFIG_MVNETA_BM_ENABLE=y -# CONFIG_MVPP2 is not set -CONFIG_MV_XOR=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6XXX=y -CONFIG_NET_DSA_TAG_DSA=y -CONFIG_NET_DSA_TAG_DSA_COMMON=y -CONFIG_NET_DSA_TAG_EDSA=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_NR_CPUS=4 -CONFIG_NVMEM=y -CONFIG_NVME_CORE=y -# CONFIG_NVME_HWMON is not set -# CONFIG_NVME_MULTIPATH is not set -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_ORION_WATCHDOG=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PAGE_POOL=y -CONFIG_PAGE_POOL_STATS=y -CONFIG_PAGE_SIZE_LESS_THAN_256KB=y -CONFIG_PAGE_SIZE_LESS_THAN_64KB=y -CONFIG_PCI=y -CONFIG_PCI_BRIDGE_EMUL=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_MVEBU=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -# CONFIG_PHY_MVEBU_A3700_COMPHY is not set -# CONFIG_PHY_MVEBU_A3700_UTMI is not set -# CONFIG_PHY_MVEBU_A38X_COMPHY is not set -# CONFIG_PHY_MVEBU_CP110_COMPHY is not set -CONFIG_PINCTRL=y -CONFIG_PINCTRL_ARMADA_370=y -CONFIG_PINCTRL_ARMADA_38X=y -CONFIG_PINCTRL_ARMADA_XP=y -CONFIG_PINCTRL_MVEBU=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PJ4B_ERRATA_4742=y -CONFIG_PL310_ERRATA_753970=y -CONFIG_PLAT_ORION=y -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO=y -CONFIG_PREEMPT_NONE_BUILD=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -CONFIG_RANDSTRUCT_NONE=y -CONFIG_RATIONAL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_ARMADA38X=y -# CONFIG_RTC_DRV_MV is not set -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_SATA_HOST=y -CONFIG_SATA_MV=y -CONFIG_SATA_PMP=y -CONFIG_SCSI=y -CONFIG_SCSI_COMMON=y -CONFIG_SENSORS_PWM_FAN=y -CONFIG_SENSORS_TMP421=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_DWLIB=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_MVEBU_CONSOLE=y -CONFIG_SERIAL_MVEBU_UART=y -CONFIG_SFP=y -CONFIG_SGL_ALLOC=y -CONFIG_SG_POOL=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SOC_BUS=y -CONFIG_SOFTIRQ_ON_OWN_STACK=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -# CONFIG_SPI_ARMADA_3700 is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_ORION=y -CONFIG_SRAM=y -CONFIG_SRAM_EXEC=y -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_ORION=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_LEDS_TRIGGER_USBPORT=y -CONFIG_USB_PHY=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_MVEBU=y -CONFIG_USB_XHCI_PLATFORM=y -CONFIG_USE_OF=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMMON=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/mvebu/cortexa53/config-6.1 b/target/linux/mvebu/cortexa53/config-6.1 deleted file mode 100644 index d8dd985365..0000000000 --- a/target/linux/mvebu/cortexa53/config-6.1 +++ /dev/null @@ -1,92 +0,0 @@ -CONFIG_64BIT=y -CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y -CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=24 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_STACKWALK=y -CONFIG_ARCH_WANTS_NO_INSTR=y -CONFIG_ARCH_WANTS_THP_SWAP=y -CONFIG_ARM64=y -CONFIG_ARM64_4K_PAGES=y -CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y -CONFIG_ARM64_PAGE_SHIFT=12 -CONFIG_ARM64_PA_BITS=48 -CONFIG_ARM64_PA_BITS_48=y -CONFIG_ARM64_TAGGED_ADDR_ABI=y -CONFIG_ARM64_VA_BITS=39 -CONFIG_ARM64_VA_BITS_39=y -CONFIG_ARMADA_37XX_CLK=y -CONFIG_ARMADA_37XX_RWTM_MBOX=y -CONFIG_ARMADA_37XX_WATCHDOG=y -CONFIG_ARMADA_AP806_SYSCON=y -CONFIG_ARMADA_AP_CP_HELPER=y -CONFIG_ARMADA_CP110_SYSCON=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_ARCH_TIMER=y -# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set -CONFIG_ARM_ARMADA_37XX_CPUFREQ=y -CONFIG_ARM_GIC_V2M=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -CONFIG_ARM_GIC_V3_ITS_PCI=y -# CONFIG_ARM_MHU_V2 is not set -# CONFIG_ARM_PL172_MPMC is not set -CONFIG_ARM_PSCI_FW=y -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -CONFIG_CC_HAVE_SHADOW_CALL_STACK=y -CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_DMA_DIRECT_REMAP=y -CONFIG_FRAME_POINTER=y -CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_IOREMAP=y -CONFIG_GENERIC_PINCONF=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_MAILBOX=y -# CONFIG_MAILBOX_TEST is not set -CONFIG_MFD_SYSCON=y -# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set -CONFIG_MMC_SDHCI_XENON=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_MVEBU_GICP=y -CONFIG_MVEBU_ICU=y -CONFIG_MVEBU_ODMI=y -CONFIG_MVEBU_PIC=y -CONFIG_MVEBU_SEI=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_PARTITION_PERCPU=y -CONFIG_PCI_AARDVARK=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_PHY_MVEBU_A3700_COMPHY=y -CONFIG_PHY_MVEBU_A3700_UTMI=y -CONFIG_PINCTRL_AC5=y -CONFIG_PINCTRL_ARMADA_37XX=y -CONFIG_PINCTRL_ARMADA_AP806=y -CONFIG_PINCTRL_ARMADA_CP110=y -CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y -CONFIG_POWER_SUPPLY=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_REGULATOR_GPIO=y -CONFIG_RODATA_FULL_DEFAULT_ENABLED=y -CONFIG_SPARSEMEM=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPI_ARMADA_3700=y -CONFIG_SWIOTLB=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y -CONFIG_TURRIS_MOX_RWTM=y -CONFIG_UNMAP_KERNEL_AT_EL0=y -CONFIG_VMAP_STACK=y -CONFIG_ZONE_DMA32=y diff --git a/target/linux/mvebu/cortexa72/config-6.1 b/target/linux/mvebu/cortexa72/config-6.1 deleted file mode 100644 index 3c398dcd8f..0000000000 --- a/target/linux/mvebu/cortexa72/config-6.1 +++ /dev/null @@ -1,111 +0,0 @@ -CONFIG_64BIT=y -CONFIG_AQUANTIA_PHY=y -CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y -CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=24 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_STACKWALK=y -CONFIG_ARCH_WANTS_NO_INSTR=y -CONFIG_ARCH_WANTS_THP_SWAP=y -CONFIG_ARM64=y -CONFIG_ARM64_4K_PAGES=y -CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y -CONFIG_ARM64_PAGE_SHIFT=12 -CONFIG_ARM64_PA_BITS=48 -CONFIG_ARM64_PA_BITS_48=y -CONFIG_ARM64_SVE=y -# CONFIG_ARM64_TAGGED_ADDR_ABI is not set -CONFIG_ARM64_VA_BITS=39 -CONFIG_ARM64_VA_BITS_39=y -CONFIG_ARMADA_37XX_CLK=y -CONFIG_ARMADA_AP806_SYSCON=y -CONFIG_ARMADA_AP_CPU_CLK=y -CONFIG_ARMADA_AP_CP_HELPER=y -CONFIG_ARMADA_CP110_SYSCON=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_ARCH_TIMER=y -# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set -CONFIG_ARM_ARMADA_8K_CPUFREQ=y -CONFIG_ARM_GIC_V2M=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -CONFIG_ARM_GIC_V3_ITS_PCI=y -# CONFIG_ARM_PL172_MPMC is not set -CONFIG_ARM_PSCI_FW=y -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -CONFIG_CC_HAVE_SHADOW_CALL_STACK=y -CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CRC_CCITT=y -CONFIG_DMA_DIRECT_REMAP=y -CONFIG_EEPROM_AT24=y -CONFIG_FRAME_POINTER=y -CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_IOREMAP=y -CONFIG_GENERIC_PINCONF=y -CONFIG_HW_RANDOM_OMAP=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_LEDS_IEI_WT61P803_PUZZLE=y -CONFIG_LEDS_IS31FL319X=y -CONFIG_MARVELL_10G_PHY=y -CONFIG_MFD_CORE=y -CONFIG_MFD_IEI_WT61P803_PUZZLE=y -CONFIG_MFD_SYSCON=y -CONFIG_MMC_SDHCI_XENON=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_MVEBU_GICP=y -CONFIG_MVEBU_ICU=y -CONFIG_MVEBU_ODMI=y -CONFIG_MVEBU_PIC=y -CONFIG_MVEBU_SEI=y -CONFIG_MVPP2=y -CONFIG_MV_XOR_V2=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NVMEM_LAYOUTS=y -CONFIG_NVMEM_LAYOUT_ONIE_TLV=y -CONFIG_NVMEM_SYSFS=y -CONFIG_PARTITION_PERCPU=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_ARMADA_8K=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -# CONFIG_PCI_AARDVARK is not set -CONFIG_PGTABLE_LEVELS=3 -CONFIG_PHYLIB_LEDS=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_PHY_MVEBU_CP110_COMPHY=y -CONFIG_PHY_MVEBU_CP110_UTMI=y -CONFIG_PINCTRL_AC5=y -CONFIG_PINCTRL_ARMADA_37XX=y -CONFIG_PINCTRL_ARMADA_AP806=y -CONFIG_PINCTRL_ARMADA_CP110=y -CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y -CONFIG_POWER_SUPPLY=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_RAS=y -# CONFIG_RAVE_SP_CORE is not set -CONFIG_REGULATOR_GPIO=y -# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set -CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON=y -CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y -CONFIG_SPARSEMEM=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SWIOTLB=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y -CONFIG_UNMAP_KERNEL_AT_EL0=y -CONFIG_VMAP_STACK=y -CONFIG_ZONE_DMA32=y diff --git a/target/linux/mvebu/cortexa9/config-6.1 b/target/linux/mvebu/cortexa9/config-6.1 deleted file mode 100644 index 7f825a806b..0000000000 --- a/target/linux/mvebu/cortexa9/config-6.1 +++ /dev/null @@ -1,12 +0,0 @@ -CONFIG_ARM_HAS_GROUP_RELOCS=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CURRENT_POINTER_IN_TPIDRURO=y -CONFIG_IRQSTACKS=y -CONFIG_LED_TRIGGER_PHY=y -CONFIG_MTD_SPLIT_SEIL_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_VIRT_CONCAT=y -CONFIG_PHY_MVEBU_A38X_COMPHY=y -CONFIG_POWER_RESET_QNAP=y -CONFIG_RTC_DRV_MV=y -CONFIG_THREAD_INFO_IN_TASK=y diff --git a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts b/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts deleted file mode 100644 index 11be6a4028..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts +++ /dev/null @@ -1,376 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Device Tree file for Buffalo LinkStation LS220DE - * - * Copyright (C) 2023 Daniel González Cabanelas <dgcbueu@gmail.com> - */ - -/dts-v1/; - -#include "armada-370.dtsi" -#include "mvebu-linkstation-fan.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/thermal/thermal.h> - -/ { - model = "Buffalo LinkStation LS220DE"; - compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp"; - - aliases { - led-boot = &led_boot; - led-failsafe = &led_failsafe; - led-running = &led_power; - led-upgrade = &led_upgrade; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - append-rootblock = "nullparameter="; /* override the bootloader args */ - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256 MB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - }; - - system_fan: gpio_fan { - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH - &gpio0 14 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - - #cooling-cells = <2>; - }; - - thermal-zones { - hdd-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */ - - trips { - hdd_alert1: trip1 { - temperature = <34000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert2: trip2 { - temperature = <40000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert3: trip3 { - temperature = <45000>; - hysteresis = <2000>; - type = "passive"; - }; - hdd_hot { - temperature = <50000>; - hysteresis = <2000>; - type = "hot"; - }; - hdd_crit { - temperature = <60000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map1 { - trip = <&hdd_alert1>; - cooling-device = <&system_fan THERMAL_NO_LIMIT 1>; - }; - map2 { - trip = <&hdd_alert2>; - cooling-device = <&system_fan 2 2>; - }; - map3 { - trip = <&hdd_alert3>; - cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - - power { - label = "Power Switch"; - linux,code = <KEY_POWER>; - linux,input-type = <EV_SW>; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - function { - label = "Function Button"; - linux,code = <KEY_CONFIG>; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_leds1 &pmx_leds2>; - - indicator_red { - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_power: power_white { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - led_failsafe: power_red { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - led_upgrade: power_orange { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_AMBER>; - gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; - }; - - led_boot: indicator_white { - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_WHITE>; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - }; - - hdd1_red { - function = LED_FUNCTION_DISK; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata1"; - function-enumerator = <1>; - }; - - hdd2_red { - function = LED_FUNCTION_DISK; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata2"; - function-enumerator = <2>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd1 &pmx_power_hdd2>; - pinctrl-names = "default"; - - sata1_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "HDD1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <2000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - - sata2_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD2"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <4000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&coherencyfab { - broken-idle; -}; - -ð1 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - marvell,reg-init = <0x3 0x10 0xf000 0x091A>, /* LED function */ - <0x3 0x11 0x0000 0x4401>, /* LED polarity */ - <0x3 0x12 0x0000 0x4905>; /* LED timer */ - #thermal-sensor-cells = <0>; - }; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi_kernel"; - reg = <0x00000000 0x02000000>; /* 32 MiB */ - }; - - partition@2000000 { - label = "ubi"; - reg = <0x02000000 0x1df00000>; /* 479 MiB */ - }; - }; - }; -}; - -&sata { - nr-ports = <2>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - hdd0_temp: sata-port@0 { - reg = <0>; - #thermal-sensor-cells = <0>; - }; - - hdd1_temp: sata-port@1 { - reg = <1>; - #thermal-sensor-cells = <0>; - }; -}; - -&spi0 { - status = "okay"; - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - - spi-flash@0 { - compatible = "mxicy,mx25l8005", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000 0xf0000>; /* 960 KiB*/ - label = "u-boot"; - read-only; - }; - partition@f0000 { - reg = <0xf0000 0x10000>; /* 64 KiB */ - label = "u-boot-env"; - }; - }; - }; -}; - -&pmsu { - pinctrl-0 = <&pmx_power_cpu>; - pinctrl-names = "default"; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&pinctrl { - pmx_power_hdd2: pmx-power-hdd2 { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_power_cpu: pmx-power-cpu { - marvell,pins = "mpp4"; - marvell,function = "vdd"; - }; - - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp10"; - marvell,function = "gpio"; - }; - - pmx_hdd_present: pmx-hdd-present { - marvell,pins = "mpp11", "mpp12"; - marvell,function = "gpio"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp15", "mpp16"; - marvell,function = "gpio"; - }; - - pmx_leds1: pmx-leds { - marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; - marvell,function = "gpo"; - }; - - pmx_leds2: pmx-leds { - marvell,pins = "mpp55", "mpp57", "mpp62"; - marvell,function = "gpio"; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts deleted file mode 100644 index 59400839a7..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Device Tree file for Buffalo LinkStation LS421DE - * - * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com> - */ - -/dts-v1/; - -#include "armada-370.dtsi" -#include "mvebu-linkstation-fan.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/thermal/thermal.h> - -/ { - model = "Buffalo LinkStation LS421DE"; - compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp"; - - aliases { - led-boot = &led_boot; - led-failsafe = &led_failsafe; - led-running = &led_power; - led-upgrade = &led_upgrade; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - append-rootblock = "nullparameter="; /* override the bootloader args */ - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - }; - - system_fan: gpio_fan { - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH - &gpio0 14 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - - #cooling-cells = <2>; - }; - - thermal-zones { - hdd-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */ - - trips { - hdd_alert1: trip1 { - temperature = <36000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert2: trip2 { - temperature = <44000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert3: trip3 { - temperature = <52000>; - hysteresis = <2000>; - type = "passive"; - }; - hdd_crit: trip4 { - temperature = <60000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map1 { - trip = <&hdd_alert1>; - cooling-device = <&system_fan THERMAL_NO_LIMIT 1>; - }; - map2 { - trip = <&hdd_alert2>; - cooling-device = <&system_fan 2 2>; - }; - map3 { - trip = <&hdd_alert3>; - cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>; - }; - }; - }; - - ethphy-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <ðphy0>; - - trips { - ethphy_alert1: trip1 { - temperature = <65000>; - hysteresis = <4000>; - type = "passive"; - }; - - ethphy_crit: trip2 { - temperature = <100000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map1 { - trip = <ðphy_alert1>; - cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - - power { - label = "Power Switch"; - linux,code = <KEY_POWER>; - linux,input-type = <EV_SW>; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - function { - label = "Function Button"; - linux,code = <KEY_CONFIG>; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_leds1 &pmx_leds2>; - - system_red { - label = "ls421de:red:system"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - }; - - led_power: power_white { - label = "ls421de:white:power"; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - led_failsafe: power_red { - label = "ls421de:red:power"; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - led_upgrade: power_orange { - label = "ls421de:orange:power"; - gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; - }; - - led_boot: system_white { - label = "ls421de:white:system"; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - }; - - hdd1_red { - label = "ls421de:red:hdd1"; - gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata1"; - }; - - hdd2_red { - label = "ls421de:red:hdd2"; - gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata2"; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>; - pinctrl-names = "default"; - - usb_power: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "USB"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; - }; - - sata1_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "HDD1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <2000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - - sata2_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD2"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <4000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&coherencyfab { - broken-idle; -}; - -ð1 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - clock-frequency = <100000>; - status = "okay"; - - rs5c372a: rs5c372a@32 { - compatible = "ricoh,rs5c372a"; - reg = <0x32>; - wakeup-source; - }; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */ - reg = <0>; - marvell,reg-init = <0x2 0x10 0xffff 0x0006>, /* disable CLK125 */ - <0x3 0x10 0x0000 0x1991>, /* LED function */ - <0x3 0x11 0x0000 0x4401>, /* LED polarity */ - <0x3 0x12 0x0000 0x4905>; /* LED timer */ - #thermal-sensor-cells = <0>; - }; -}; - -&pciec { - status = "okay"; - pinctrl-0 = <&pmx_pcie>; - pinctrl-names = "default"; - - /* Connected to uPD720202 USB 3.0 Host */ - pcie@1,0 { - status = "okay"; - }; -}; - -&pmsu { - pinctrl-0 = <&pmx_power_cpu>; - pinctrl-names = "default"; -}; - -&rtc { - status = "disabled"; -}; - -&sata { - nr-ports = <2>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - hdd0_temp: sata-port@0 { - reg = <0>; - #thermal-sensor-cells = <0>; - }; - - hdd1_temp: sata-port@1 { - reg = <1>; - #thermal-sensor-cells = <0>; - }; -}; - -&sdio { - pinctrl-0 = <&sdio_pins2>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x00000000 0x02000000>; /* 32 MiB */ - }; - - partition@2000000 { - label = "ubi"; - reg = <0x02000000 0x1e000000>; /* 480 MiB */ - }; - }; - }; -}; - -&spi0 { - status = "okay"; - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - - spi-flash@0 { - compatible = "mxicy,mx25l8005", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000 0xf0000>; /* 960 KiB*/ - label = "u-boot"; - read-only; - }; - partition@f0000 { - reg = <0xf0000 0x10000>; /* 64 KiB */ - label = "u-boot-env"; - }; - }; - }; -}; - -&pinctrl { - pmx_power_cpu: pmx-power-cpu { - marvell,pins = "mpp4"; - marvell,function = "vdd"; - }; - - pmx_power_usb: pmx-power-usb { - marvell,pins = "mpp5"; - marvell,function = "gpo"; - }; - - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - - pmx_power_hdd2: pmx-power-hdd2 { - marvell,pins = "mpp9"; - marvell,function = "gpo"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp10"; - marvell,function = "gpio"; - }; - - pmx_hdd_present: pmx-hdd-present { - marvell,pins = "mpp11", "mpp12"; - marvell,function = "gpio"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp15", "mpp16"; - marvell,function = "gpio"; - }; - - pmx_leds1: pmx-leds { - marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; - marvell,function = "gpo"; - }; - - pmx_leds2: pmx-leds { - marvell,pins = "mpp55", "mpp57", "mpp62"; - marvell,function = "gpio"; - }; - - pmx_pcie: pmx-pcie { - marvell,pins = "mpp56", "mpp60"; - marvell,function = "pcie"; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-c200-v2.dts b/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-c200-v2.dts deleted file mode 100644 index 0d5ec567ea..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-c200-v2.dts +++ /dev/null @@ -1,424 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Device Tree file for Ctera C200-V2 - * - * Copyright (C) 2021 Pawel Dembicki <paweldembicki@gmail.com> - */ - -/dts-v1/; - -#include "armada-370.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/thermal/thermal.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Ctera C200 V2"; - compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp"; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_red; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x40000000>; /* 1024 MB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - }; - - thermal-zones { - ethphy-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <ðphy0>; - - trips { - ethphy_alert1: trip1 { - temperature = <65000>; - hysteresis = <4000>; - type = "passive"; - }; - - ethphy_crit: trip2 { - temperature = <100000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - - power { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - }; - - reset { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - }; - - usb1 { - label = "USB1 Button"; - linux,code = <BTN_0>; - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - }; - - usb2 { - label = "USB2 Button"; - linux,code = <BTN_1>; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_poweroff>; - pinctrl-names = "default"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_leds1 &pmx_leds2>; - pinctrl-names = "default"; - - led-0 { - function = LED_FUNCTION_USB; - function-enumerator = <2>; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - led-1 { - function = LED_FUNCTION_USB; - function-enumerator = <2>; - color = <LED_COLOR_ID_GREEN>; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "usbport"; - trigger-sources = <&usb1_port 1>, <&usb2_port 1>; - }; - - led-2 { - function = LED_FUNCTION_USB; - function-enumerator = <1>; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - led-3 { - function = LED_FUNCTION_USB; - function-enumerator = <1>; - color = <LED_COLOR_ID_GREEN>; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - linux,default-trigger = "usbport"; - trigger-sources = <&usb1_port 2>, <&usb2_port 2>; - }; - - led-4 { - function = LED_FUNCTION_DISK; - function-enumerator = <2>; - color = <LED_COLOR_ID_GREEN>; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata2"; - }; - - led-5 { - function = LED_FUNCTION_DISK; - function-enumerator = <1>; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; - }; - - led-6 { - function = LED_FUNCTION_DISK; - function-enumerator = <2>; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - }; - - led-7 { - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_BLUE>; - gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; - }; - - led-8 { - function = LED_FUNCTION_DISK_ERR; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - }; - - led-9 { - function = LED_FUNCTION_DISK_ERR; - color = <LED_COLOR_ID_GREEN>; - gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; - }; - - led_status_red: led-10 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; - }; - - led-11 { - function = LED_FUNCTION_DISK; - function-enumerator = <1>; - color = <LED_COLOR_ID_GREEN>; - gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata1"; - }; - - led_status_green: led-12 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&coherencyfab { - broken-idle; -}; - -ð1 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - clock-frequency = <100000>; - status = "okay"; - - hwmon@2a { - compatible = "nuvoton,nct7802"; - reg = <0x2a>; - }; - - rtc@30 { - compatible = "sii,s35390a"; - reg = <0x30>; - }; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - #thermal-sensor-cells = <0>; - }; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x200000>; - read-only; - }; - - partition@200000 { - label = "certificate"; - reg = <0x0200000 0x100000>; - read-only; - }; - - partition@300000 { - label = "preset_cfg"; - reg = <0x0300000 0x100000>; - read-only; - }; - - partition@400000 { - label = "dev_params"; - reg = <0x0400000 0x100000>; - read-only; - }; - partition@500000 { - label = "active_bank"; - reg = <0x0500000 0x0100000>; - }; - - partition@600000 { - label = "magic"; - reg = <0x0600000 0x0100000>; - read-only; - }; - - partition@700000 { - label = "bank1"; - reg = <0x0700000 0x2800000>; - }; - - partition@2f00000 { - label = "bank2"; - reg = <0x2f00000 0x2800000>; - }; - - /* 0x5700000-0x5a00000 undefined in vendor firmware */ - - partition@5a00000 { - label = "reserved"; - reg = <0x5a00000 0x2000000>; - }; - - partition@7a00000 { - label = "ubi"; - reg = <0x7a00000 0x8600000>; - }; - }; - }; -}; - -&pciec { - status = "okay"; - - pcie@1,0 { - pinctrl-0 = <&pmx_pcie>; - pinctrl-names = "default"; - status = "okay"; - reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - - /* -[0000:00]---01.0-[01]----00.0 */ - /* usbport trigger won't work */ - bridge@0,1 { - compatible = "pci11ab,6710"; - reg = <0x3800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - - usb@1,0 { - /* Renesas uPD720202 */ - compatible = "pci1912,0015"; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - - usb1_port: port@1 { - reg = <1>; - #trigger-source-cells = <1>; - }; - - usb2_port: port@2 { - reg = <2>; - #trigger-source-cells = <1>; - }; - }; - }; - }; -}; - -&pinctrl { - pmx_poweroff: pmx-poweroff { - marvell,pins = "mpp7"; - marvell,function = "gpo"; - }; - - pmx_power_cpu: pmx-power-cpu { - marvell,pins = "mpp4"; - marvell,function = "vdd"; - }; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32"; - marvell,function = "gpio"; - }; - - pmx_leds1: pmx-leds1 { - marvell,pins = "mpp47"; - marvell,function = "gpo"; - }; - - pmx_leds2: pmx-leds2 { - marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51", - "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58"; - marvell,function = "gpio"; - }; - - pmx_pcie: pmx-pcie { - marvell,pins = "mpp59"; - marvell,function = "gpio"; - }; - - /* this gpio is connected to the pin of buzzer - * leave it as is due lack of proper driver - */ - pmx_buzzer: pmx-buzzer { - marvell,pins = "mpp63"; - marvell,function = "gpio"; - }; -}; - -&pmsu { - pinctrl-0 = <&pmx_power_cpu>; - pinctrl-names = "default"; -}; - -&rtc { - status = "disabled"; -}; - -&sata { - nr-ports = <2>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - hdd0_temp: sata-port@0 { - reg = <0>; - #thermal-sensor-cells = <0>; - }; - - hdd1_temp: sata-port@1 { - reg = <1>; - #thermal-sensor-cells = <0>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-380-iij-sa-w2.dts b/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-380-iij-sa-w2.dts deleted file mode 100644 index 01c1ef675b..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-380-iij-sa-w2.dts +++ /dev/null @@ -1,389 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include "armada-380.dtsi" - -/ { - model = "IIJ SA-W2"; - compatible = "iij,sa-w2", "marvell,armada380"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_red; - led-running = &led_power_green; - led-upgrade = &led_power_green; - label-mac-device = &ge0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256MB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 - MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; - - pcie { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - - pcie@3,0 { - status = "okay"; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_keys_pins>; - - button-init { - label = "init"; - linux,code = <KEY_RESTART>; - gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_leds_pins>; - - led-0 { - gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WLAN_5GHZ; - linux,default-trigger = "phy0tpt"; - }; - - led-1 { - gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_WLAN_5GHZ; - }; - - led-2 { - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - }; - - led-3 { - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_STATUS; - }; - - led-4 { - gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_MOBILE; - }; - - led-5 { - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_MOBILE; - }; - - led-6 { - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WLAN_2GHZ; - linux,default-trigger = "phy1tpt"; - }; - - led-7 { - gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_WLAN_2GHZ; - }; - - led_power_green: led-8 { - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_POWER; - }; - - led_power_red: led-9 { - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_POWER; - }; - - led-10 { - gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_USB; - function-enumerator = <1>; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port2>; - }; - - led-11 { - gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_USB; - function-enumerator = <0>; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port1>; - }; - }; - - regulator-vbus-usb0 { - compatible = "regulator-fixed"; - regulator-name = "vbus-usb0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - regulator-vbus-usb1 { - compatible = "regulator-fixed"; - regulator-name = "vbus-usb1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&pinctrl { - pmx_usb_pins: usb-pins { - marvell,pins = "mpp2", /* smsc usb2514b reset */ - "mpp48", "mpp49", /* port over current */ - "mpp52", "mpp53"; /* port vbus */ - marvell,function = "gpio"; - }; - - pmx_keys_pins: keys-pins { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; - - pmx_leds_pins: leds-pins { - marvell,pins = "mpp19", "mpp20", "mpp33", "mpp34", "mpp35", - "mpp36", "mpp44", "mpp45", "mpp46", "mpp47", - "mpp54", "mpp55"; - marvell,function = "gpio"; - }; -}; - -&gpio0 { - usb-hub-reset { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - output-high; - }; -}; - -&usb0 { - pinctrl-names = "default"; - pinctrl-0 = <&pmx_usb_pins>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - /* SMSC USB2514B on PCB */ - hub@1 { - compatible = "usb424,2514"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - hub_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - hub_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð1 { - pinctrl-names = "default"; - pinctrl-0 = <&ge1_rgmii_pins>; - status = "okay"; - - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; - - nvmem-cells = <&macaddr_bdinfo_6 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>; - status = "okay"; - - /* Marvell 88E6172 */ - switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0x0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gpio1>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "ge1_0"; - }; - - port@1 { - reg = <1>; - label = "ge1_1"; - }; - - port@2 { - reg = <2>; - label = "ge1_2"; - }; - - port@3 { - reg = <3>; - label = "ge1_3"; - }; - - ge0: port@4 { - reg = <4>; - label = "ge0"; - nvmem-cells = <&macaddr_bdinfo_6 0>; - nvmem-cell-names = "mac-address"; - }; - - /* - * eth0 is connected to port5 for WAN connection - * on port4 ("GE0") - */ - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <ð1>; - phy-connection-type = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -&rtc { - status = "disabled"; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x100000>; - label = "bootloader"; - read-only; - }; - - partition@100000 { - reg = <0x100000 0x10000>; - label = "bootloader-env"; - read-only; - }; - - partition@110000 { - reg = <0x110000 0xf0000>; - label = "board_info"; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_bdinfo_6: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@200000 { - compatible = "iij,seil-firmware"; - reg = <0x200000 0xf00000>; - label = "firmware"; - iij,bootdev-name = "flash"; - iij,seil-id = <0x5345494c 0x32303135>; - }; - - partition@1100000 { - compatible = "iij,seil-firmware"; - reg = <0x1100000 0xf00000>; - label = "rescue"; - iij,bootdev-name = "rescue"; - iij,seil-id = <0x5345494c 0x32303135>; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts b/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts deleted file mode 100644 index dca6fbacf0..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts +++ /dev/null @@ -1,99 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-x0e.dtsi" - -/ { - model = "Fortinet FortiGate 30E"; - compatible = "fortinet,fg-30e", "marvell,armada385", "marvell,armada380"; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x40000000>; /* 1GB */ - }; -}; - -&gpio_leds { - led-14 { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_SPEED_WAN; - linux,default-trigger = "mv88e6xxx-1:00:100Mbps"; - }; - - led-15 { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_SPEED_WAN; - linux,default-trigger = "mv88e6xxx-1:00:1Gbps"; - }; -}; - -&pinctrl { - pmx_switch_pins: switch-pins { - marvell,pins = "mpp19"; - marvell,function = "gpio"; - }; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>, <&pmx_switch_pins>; - - /* Marvell 88E6176 */ - switch@2 { - compatible = "marvell,mv88e6085"; - reg = <0x2>; - reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "wan"; - nvmem-cells = <&macaddr_bdinfo_d880 1>; - nvmem-cell-names = "mac-address"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - nvmem-cells = <&macaddr_bdinfo_d880 5>; - nvmem-cell-names = "mac-address"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - nvmem-cells = <&macaddr_bdinfo_d880 4>; - nvmem-cell-names = "mac-address"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - nvmem-cells = <&macaddr_bdinfo_d880 3>; - nvmem-cell-names = "mac-address"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - nvmem-cells = <&macaddr_bdinfo_d880 2>; - nvmem-cell-names = "mac-address"; - }; - - port@6 { - reg = <6>; - ethernet = <ð0>; - phy-connection-type = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts b/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts deleted file mode 100644 index cf13bb5fda..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts +++ /dev/null @@ -1,175 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-x0e.dtsi" - -/ { - model = "Fortinet FortiGate 50E"; - compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380"; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2GB */ - }; -}; - -&gpio_leds { - led-14 { - gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_SPEED_WAN; - function-enumerator = <1>; - linux,default-trigger = "f1072004.mdio-mii:00:1Gbps"; - }; - - led-15 { - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_SPEED_WAN; - function-enumerator = <2>; - linux,default-trigger = "f1072004.mdio-mii:01:1Gbps"; - }; - - led-16 { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <5>; - linux,default-trigger = "mv88e6xxx-1:00:100Mbps"; - }; - - led-17 { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <5>; - linux,default-trigger = "mv88e6xxx-1:00:1Gbps"; - }; -}; - -&pinctrl { - pmx_phy_switch_pins: phy-switch-pins { - marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41"; - marvell,function = "gpio"; - }; -}; - -ð1 { - status = "okay"; - - phy-handle = <ðphy0>; - phy-connection-type = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - nvmem-cells = <&macaddr_bdinfo_d880 1>; - nvmem-cell-names = "mac-address"; -}; - -ð2 { - status = "okay"; - - phy-handle = <ðphy1>; - phy-connection-type = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <3>; - nvmem-cells = <&macaddr_bdinfo_d880 2>; - nvmem-cell-names = "mac-address"; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>; - - /* Marvell 88E1512 */ - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-id0141,0dd1", - "ethernet-phy-ieee802.3-c22"; - reg = <0>; - interrupt-parent = <&gpio0>; - interrupts = <20 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - /* - * LINK/ACT (Green): LED[0], Active Low - * SPEED 100M (Amber): LED[1], Active High - */ - marvell,reg-init = <3 16 0 0x71>, - <3 17 0 0x4>; - }; - - /* Marvell 88E1512 */ - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-id0141,0dd1", - "ethernet-phy-ieee802.3-c22"; - reg = <1>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - /* - * LINK/ACT (Green): LED[0], Active Low - * SPEED 100M (Amber): LED[1], Active High - */ - marvell,reg-init = <3 16 0 0x71>, - <3 17 0 0x4>; - }; - - /* Marvell 88E6176 */ - switch@2 { - compatible = "marvell,mv88e6085"; - reg = <0x2>; - reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan5"; - nvmem-cells = <&macaddr_bdinfo_d880 7>; - nvmem-cell-names = "mac-address"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - nvmem-cells = <&macaddr_bdinfo_d880 6>; - nvmem-cell-names = "mac-address"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - nvmem-cells = <&macaddr_bdinfo_d880 5>; - nvmem-cell-names = "mac-address"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - nvmem-cells = <&macaddr_bdinfo_d880 4>; - nvmem-cell-names = "mac-address"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - nvmem-cells = <&macaddr_bdinfo_d880 3>; - nvmem-cell-names = "mac-address"; - }; - - port@6 { - reg = <6>; - ethernet = <ð0>; - phy-connection-type = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-x0e.dtsi b/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-x0e.dtsi deleted file mode 100644 index 6a5e016d30..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-x0e.dtsi +++ /dev/null @@ -1,346 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include "armada-385.dtsi" - -/ { - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_green; - label-mac-device = ð0; - }; - - chosen { - stdout-path = "serial0:9600n8"; - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 - MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_gpio_keys_pins>; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds: gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_gpio_leds_pins>; - - led-0 { - gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_ALARM; - }; - - led-1 { - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_RED>; - function = "ha"; - }; - - led_status_green: led-2 { - gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - }; - - led-3 { - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = "ha"; - }; - - led-4 { - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_ALARM; - }; - - led_status_red: led-5 { - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_STATUS; - }; - - led-6 { - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <4>; - linux,default-trigger = "mv88e6xxx-1:01:1Gbps"; - }; - - led-7 { - gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <4>; - linux,default-trigger = "mv88e6xxx-1:01:100Mbps"; - }; - - led-8 { - gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <3>; - linux,default-trigger = "mv88e6xxx-1:02:100Mbps"; - }; - - led-9 { - gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <3>; - linux,default-trigger = "mv88e6xxx-1:02:1Gbps"; - }; - - led-10 { - gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <1>; - linux,default-trigger = "mv88e6xxx-1:04:1Gbps"; - }; - - led-11 { - gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <1>; - linux,default-trigger = "mv88e6xxx-1:04:100Mbps"; - }; - - led-12 { - gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <2>; - linux,default-trigger = "mv88e6xxx-1:03:1Gbps"; - }; - - led-13 { - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <2>; - linux,default-trigger = "mv88e6xxx-1:03:100Mbps"; - }; - }; - - reg_usb_vbus: regulator-usb-vbus { - compatible = "fixed-regulator"; - regulator-name = "usb-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; - regulator-always-on; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - gpio2: gpio@24 { - compatible = "nxp,pca9555"; - reg = <0x24>; - gpio-controller; - #gpio-cells = <0x2>; - }; - - hwmon@28 { - compatible = "nuvoton,nct7802"; - reg = <0x28>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&pinctrl { - pmx_gpio_leds_pins: gpio-leds-pins { - marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35", - "mpp45", "mpp47"; - marvell,function = "gpio"; - }; - - pmx_usb_pins: usb-pins { - marvell,pins = "mpp53"; - marvell,function = "gpio"; - }; - - pmx_gpio_keys_pins: gpio-keys-pins { - marvell,pins = "mpp54"; - marvell,function = "gpio"; - }; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&ge0_rgmii_pins>; - status = "okay"; - - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - nvmem-cells = <&macaddr_bdinfo_d880 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&usb3_0 { - pinctrl-names = "default"; - pinctrl-0 = <&pmx_usb_pins>; - status = "okay"; - - vbus-supply = <®_usb_vbus>; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x1c0000>; - label = "u-boot"; - read-only; - }; - - partition@1c0000 { - reg = <0x1c0000 0x10000>; - label = "firmware-info"; - - /* - * 0x10 - 0x2f : image name (image1) - * 0x30 - 0x4f : image name (image2) - * 0x170 (1byte): active image (0x0/0x1) - * 0x184 - 0x185: kernel block count (image1) - * 0x18c - 0x18d: rootfs block count (image1) - * 0x194 - 0x195: kernel block count (image2) - * 0x19c - 0x19d: rootfs block count (image2) - * 0x1be (1byte): bit7 -> active flag (image1)? - * 0x1ce (1byte): bit7 -> active flag (image2)? - * - * Note: block size --> 0x200 (512 bytes) - */ - }; - - partition@1d0000 { - reg = <0x1d0000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@1e0000 { - reg = <0x1e0000 0x10000>; - label = "u-boot-env"; - read-only; - }; - - partition@1f0000 { - reg = <0x1f0000 0x10000>; - label = "board-info"; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_bdinfo_d880: macaddr@d880 { - compatible = "mac-base"; - reg = <0xd880 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@200000 { - reg = <0x200000 0x600000>; - label = "kernel"; - }; - - partition@800000 { - reg = <0x800000 0x1800000>; - label = "rootfs"; - }; - - partition@2000000 { - reg = <0x2000000 0x600000>; - label = "kn2"; - read-only; - }; - - partition@2600000 { - reg = <0x2600000 0x1800000>; - label = "rfs2"; - read-only; - }; - - partition@3e00000 { - reg = <0x3e00000 0x1200000>; - label = "part1"; - read-only; - }; - - partition@5000000 { - reg = <0x5000000 0x1200000>; - label = "part2"; - read-only; - }; - - partition@6200000 { - reg = <0x6200000 0x1e00000>; - label = "config"; - read-only; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-linksys-venom.dts b/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-linksys-venom.dts deleted file mode 100644 index a2ca3158cf..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-linksys-venom.dts +++ /dev/null @@ -1,213 +0,0 @@ -/* - * Device Tree file for the Linksys WRT32X (Venom) - * - * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org> - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "armada-385-linksys.dtsi" - -/ { - model = "Linksys WRT32X"; - compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385", - "marvell,armada385", "marvell,armada380"; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - append-rootblock = "root=/dev/mtdblock"; - }; -}; - -&expander0 { - wan_amber@0 { - label = "venom:amber:wan"; - reg = <0x0>; - }; - - wan_blue@1 { - label = "venom:blue:wan"; - reg = <0x1>; - }; - - usb2@5 { - label = "venom:blue:usb2"; - reg = <0x5>; - }; - - usb3_1@6 { - label = "venom:blue:usb3_1"; - reg = <0x6>; - }; - - usb3_2@7 { - label = "venom:blue:usb3_2"; - reg = <0x7>; - }; - - wps_blue@8 { - label = "venom:blue:wps"; - reg = <0x8>; - }; - - wps_amber@9 { - label = "venom:amber:wps"; - reg = <0x9>; - }; -}; - -&gpio_leds { - power { - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - label = "venom:blue:power"; - }; - - sata { - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - label = "venom:blue:sata"; - }; - - wlan_2g { - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - label = "venom:blue:wlan_2g"; - }; - - wlan_5g { - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - label = "venom:blue:wlan_5g"; - }; -}; - -&gpio_leds_pins { - marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56"; -}; - -&nand { - /* Spansion S34ML02G2 256MiB, OEM Layout */ - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MB */ - read-only; - }; - - partition@200000 { - label = "u_env"; - reg = <0x200000 0x20000>; /* 128KB */ - }; - - partition@220000 { - label = "s_env"; - reg = <0x220000 0x40000>; /* 256KB */ - }; - - partition@180000 { - label = "unused_area"; - reg = <0x260000 0x5c0000>; /* 5.75MB */ - }; - - partition@7e0000 { - label = "devinfo"; - reg = <0x7e0000 0x40000>; /* 256KB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@900000 { - label = "kernel1"; - reg = <0x900000 0x7b00000>; /* 123MB */ - }; - - partition@f00000 { - label = "rootfs1"; - reg = <0xf00000 0x7500000>; /* 117MB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@8400000 { - label = "kernel2"; - reg = <0x8400000 0x7b00000>; /* 123MB */ - }; - - partition@8a00000 { - label = "rootfs2"; - reg = <0x8a00000 0x7500000>; /* 117MB */ - }; - - /* last MB is for the BBT, not writable */ - partition@ff00000 { - label = "BBT"; - reg = <0xff00000 0x100000>; - }; - }; -}; - - -&pcie1 { - mwlwifi { - marvell,chainmask = <4 4>; - }; -}; - -&pcie2 { - mwlwifi { - marvell,chainmask = <4 4>; - }; -}; - -&sdhci { - pinctrl-names = "default"; - pinctrl-0 = <&sdhci_pins>; - no-1-8-v; - non-removable; - wp-inverted; - bus-width = <8>; - status = "okay"; -}; - -&usb3_1_vbus { - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; -}; - -&usb3_1_vbus_pins { - marvell,pins = "mpp44"; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-nas1dual.dts b/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-nas1dual.dts deleted file mode 100644 index f1fd72a93c..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-nas1dual.dts +++ /dev/null @@ -1,322 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR MIT) -/* - * Device Tree file for ipTIME NAS1dual - * - * Copyright (C) 2020 Sungbo Eo <mans0n@gorani.run> - * - * Based on armada-385-linksys.dtsi - * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include "armada-385.dtsi" - -/ { - model = "ipTIME NAS1dual"; - compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380"; - - aliases { - led-boot = &led_ready; - led-failsafe = &led_ready; - led-running = &led_ready; - led-upgrade = &led_ready; - label-mac-device = ð0; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2GB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 - MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins>; - - power { - label = "Power Button"; - linux,input-type = <EV_SW>; - linux,code = <KEY_POWER>; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - }; - - copy { - label = "USB Copy Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_leds_pins>; - - led_ready: ready { - label = "blue:ready"; - gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - }; - - hdd { - label = "blue:hdd"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - linux,default-trigger = "disk-activity"; - }; - - usb { - function = LED_FUNCTION_USB; - color = <LED_COLOR_ID_BLUE>; - gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb3_0_port1 &usb3_0_port2>; - linux,default-trigger = "usbport"; - }; - }; - - gpio-fan { - compatible = "gpio-fan"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_fan_pins>; - gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>, - <&gpio1 18 GPIO_ACTIVE_HIGH>; - /* We don't know the exact rpm, just use dummy values here. */ - gpio-fan,speed-map = <0 0>, <1 1>, <2 2>; - #cooling-cells = <2>; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - gpios = <&pca9536 1 GPIO_ACTIVE_LOW>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&sata_power_pins>; - - reg_sata_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "sata-power"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; - regulator-always-on; - }; - }; -}; - -&ahci0 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - sata-port@0 { - reg = <0>; - target-supply = <®_sata_power>; - #thermal-sensor-cells = <0>; - }; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&ge0_rgmii_pins>; - status = "okay"; - phy-handle = <ðphy1>; - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - nvmem-cells = <&macaddr_uboot_fffa8>; - nvmem-cell-names = "mac-address"; -}; - -ð1 { - pinctrl-names = "default"; - pinctrl-0 = <&ge1_rgmii_pins>; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; - nvmem-cells = <&macaddr_uboot_fffa8>; - nvmem-cell-names = "mac-address"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - pca9536: gpio@41 { - compatible = "nxp,pca9536"; - reg = <0x41>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "power-led", "power-board"; - }; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>; - - /* LED1: On - Link, Blink - Activity, Off - No Link */ - - ethphy0: ethernet-phy@0 { - reg = <0>; - marvell,reg-init = <3 16 0 0x1017>; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 16 0 0x1017>; - }; -}; - -&pinctrl { - gpio_keys_pins: gpio-keys-pins { - marvell,pins = "mpp24", "mpp26", "mpp48"; - marvell,function = "gpio"; - }; - - gpio_leds_pins: gpio-leds-pins { - marvell,pins = "mpp18", "mpp20", "mpp51"; - marvell,function = "gpio"; - }; - - gpio_fan_pins: gpio-fan-pins { - marvell,pins = "mpp25", "mpp50"; - marvell,function = "gpio"; - }; - - sata_power_pins: sata-power-pins { - marvell,pins = "mpp52"; - marvell,function = "gpio"; - }; - - uart1_pins_alt: uart-pins-1-alt { - marvell,pins = "mpp45", "mpp46"; - marvell,function = "ua1"; - }; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000000 0x00100000>; - label = "u-boot"; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_uboot_fffa8: macaddr@fffa8 { - reg = <0xfffa8 0x6>; - }; - }; - }; - - partition@100000 { - reg = <0x00100000 0x03ec0000>; - label = "firmware"; - - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000000 0x00600000>; - label = "kernel"; - }; - - partition@600000 { - reg = <0x00600000 0x038c0000>; - label = "rootfs"; - }; - }; - - partition@3fc0000 { - reg = <0x03fc0000 0x00040000>; - label = "config"; - read-only; - }; - }; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_alt>; - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - usb3_0_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_0_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts deleted file mode 100644 index 35f107b63b..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts +++ /dev/null @@ -1,66 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include "armada-3720-uDPU.dtsi" - -/ { - model = "Methode eDPU Board"; - compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710"; -}; - -/* PHY mode is set to 1000Base-X despite Maxlinear IC being capable of - * 2500Base-X since until 5.15 support for mvebu is available trying to - * use 2500Base-X will cause buffer overruns for which the fix is not - * easily backportable. - */ -ð0 { - phy-mode = "1000base-x"; -}; - -/* - * External MV88E6361 switch is only available on v2 of the board. - * U-Boot will enable the MDIO bus and switch nodes. - */ -&mdio { - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&smi_pins>; - - /* Actual device is MV88E6361 */ - switch: switch@0 { - compatible = "marvell,mv88e6190"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - phy-mode = "2500base-x"; - managed = "in-band-status"; - ethernet = <ð0>; - }; - - port@9 { - reg = <9>; - label = "downlink"; - phy-mode = "2500base-x"; - managed = "in-band-status"; - }; - - port@a { - reg = <10>; - label = "uplink"; - phy-mode = "2500base-x"; - managed = "in-band-status"; - sfp = <&sfp_eth1>; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts deleted file mode 100644 index 1a6594e3cd..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for ESPRESSObin-Ultra - * Copyright (C) 2019 Globalscale technologies, Inc. - * - * Jason Hung <jhung@globalscaletechnologies.com> - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include "armada-372x.dtsi" - -/ { - model = "Globalscale Marvell ESPRESSOBin Ultra Board"; - compatible = "globalscale,espressobin-ultra", "marvell,armada3720", - "marvell,armada3710"; - - aliases { - /* for dsa slave device */ - ethernet1 = &switch0port1; - ethernet2 = &switch0port2; - ethernet3 = &switch0port3; - ethernet4 = &switch0port4; - ethernet5 = &switch0port5; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - reg_usb3_vbus: usb3-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb3-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>; - }; - - usb3_phy: usb3-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <®_usb3_vbus>; - }; - - leds { - pinctrl-names = "default"; - compatible = "gpio-leds"; - /* No assigned functions to the LEDs by default */ - led1 { - label = "ebin-ultra:blue:led1"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - led2 { - label = "ebin-ultra:green:led2"; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - led3 { - label = "ebin-ultra:red:led3"; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - }; - led4 { - label = "ebin-ultra:yellow:led4"; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&pcie0 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&sdhci0 { - status = "okay"; - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <108000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x3e0000>; - }; - partition@3e0000 { - label = "hw-info"; - reg = <0x3e0000 0x10000>; - read-only; - }; - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -&uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; -}; - -&i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - clock-frequency = <100000>; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&usb3 { - status = "okay"; - usb-phy = <&usb3_phy>; -}; - -&usb2 { - status = "okay"; -}; - -ð0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&mdio { - status = "okay"; - - extphy: ethernet-phy@0 { - reg = <1>; - }; - - switch0: switch0@1 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - dsa,member = <0 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - switch0port0: port@0 { - reg = <0>; - ethernet = <ð0>; - }; - - switch0port1: port@1 { - reg = <1>; - label = "lan0"; - phy-handle = <&switch0phy1>; - }; - - switch0port2: port@2 { - reg = <2>; - label = "lan1"; - phy-handle = <&switch0phy2>; - }; - - switch0port3: port@3 { - reg = <3>; - label = "lan2"; - phy-handle = <&switch0phy3>; - }; - - switch0port4: port@4 { - reg = <4>; - label = "lan3"; - phy-handle = <&switch0phy4>; - }; - - switch0port5: port@5 { - reg = <5>; - label = "wan"; - phy-handle = <&extphy>; - phy-mode = "sgmii"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy1: switch0phy1@11 { - reg = <0x11>; - }; - switch0phy2: switch0phy2@12 { - reg = <0x12>; - }; - switch0phy3: switch0phy3@13 { - reg = <0x13>; - }; - switch0phy4: switch0phy4@14 { - reg = <0x14>; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts deleted file mode 100644 index 07400fce3a..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +++ /dev/null @@ -1,250 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include "armada-372x.dtsi" - -/ { - model = "GL.iNet GL-MV1000"; - compatible = "glinet,gl-mv1000", "marvell,armada3720"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - vcc_sd_reg1: regulator { - compatible = "regulator-gpio"; - regulator-name = "vcc_sd1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - gpios-states = <0>; - states = <1800000 0x1 - 3300000 0x0>; - enable-active-high; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - - switch { - label = "switch"; - linux,code = <BTN_0>; - gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - - vpn { - label = "green:vpn"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - - wan { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - m25p,fast-read; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0 0xf0000>; - read-only; - }; - - partition@f0000 { - label = "u-boot-env"; - reg = <0xf0000 0x8000>; - read-only; - }; - - factory: partition@f8000 { - label = "factory"; - reg = <0xf8000 0x8000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_factory_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_factory_6: macaddr@6 { - reg = <0x6 0x6>; - }; - }; - }; - - partition@100000 { - label = "gl-firmware-dtb"; - reg = <0x100000 0x10000>; - read-only; - }; - - partition@110000 { - label = "gl-firmware"; - reg = <0x110000 0xef0000>; - read-only; - }; - - partition@ef0000 { - label = "gl-firmware-jffs2"; - reg = <0xef0000 0x110000>; - read-only; - }; - }; - }; -}; - -&sdhci1 { - wp-inverted; - bus-width = <4>; - cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; - marvell,pad-type = "sd"; - no-1-8-v; - vqmmc-supply = <&vcc_sd_reg1>; - status = "okay"; -}; - -&sdhci0 { - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - non-removable; - no-sd; - no-sdio; - marvell,pad-type = "fixed-1-8v"; - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&mdio { - switch0: switch0@1 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - dsa,member = <0 0>; - - ports: ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - ethernet = <ð0>; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-handle = <&switch0phy0>; - }; - - port@2 { - reg = <2>; - label = "lan0"; - phy-handle = <&switch0phy1>; - - nvmem-cells = <&macaddr_factory_6>; - nvmem-cell-names = "mac-address"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - phy-handle = <&switch0phy2>; - - nvmem-cells = <&macaddr_factory_6>; - nvmem-cell-names = "mac-address"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy0: switch0phy0@11 { - reg = <0x11>; - }; - switch0phy1: switch0phy1@12 { - reg = <0x12>; - }; - switch0phy2: switch0phy2@13 { - reg = <0x13>; - }; - }; - }; -}; - -ð0 { - nvmem-cells = <&macaddr_factory_0>; - nvmem-cell-names = "mac-address"; - phy-mode = "rgmii-id"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts deleted file mode 100644 index 186a5e7d7d..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include "armada-3720-uDPU.dtsi" - -/ { - model = "Methode uDPU Board"; - compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710"; - - sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; -}; - -&pinctrl_nb { - i2c1_recovery_pins: i2c1-recovery-pins { - groups = "i2c1"; - function = "gpio"; - }; -}; - -&i2c0 { - status = "okay"; - pinctrl-names = "default", "recovery"; - pinctrl-0 = <&i2c1_pins>; - pinctrl-1 = <&i2c1_recovery_pins>; - /delete-property/mrvl,i2c-fast-mode; - scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -}; - -ð0 { - phy-mode = "2500base-x"; - sfp = <&sfp_eth0>; -}; - -ð1 { - phy-mode = "2500base-x"; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi deleted file mode 100644 index bc8d1f1020..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi +++ /dev/null @@ -1,165 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device tree for the uDPU board. - * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) - * Copyright (C) 2016 Marvell - * Copyright (C) 2019 Methode Electronics - * Copyright (C) 2019 Telus - * - * Vladimir Vid <vladimir.vid@sartura.hr> - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include "armada-372x.dtsi" - -/ { - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - aliases { - ethernet0 = ð0; - ethernet1 = ð1; - }; - - leds { - compatible = "gpio-leds"; - - led-power1 { - label = "udpu:green:power"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - - led-power2 { - label = "udpu:red:power"; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - - led-network1 { - label = "udpu:green:network"; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - }; - - led-network2 { - label = "udpu:red:network"; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - - led-alarm1 { - label = "udpu:green:alarm"; - gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; - }; - - led-alarm2 { - label = "udpu:red:alarm"; - gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; - }; - }; - - sfp_eth1: sfp-eth1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; - non-removable; - no-sd; - no-sdio; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <54000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x180000>; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x10000>; - }; - }; - }; -}; - -&pinctrl_nb { - i2c2_recovery_pins: i2c2-recovery-pins { - groups = "i2c2"; - function = "gpio"; - }; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default", "recovery"; - pinctrl-0 = <&i2c2_pins>; - pinctrl-1 = <&i2c2_recovery_pins>; - /delete-property/mrvl,i2c-fast-mode; - scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - temp-sensor@48 { - compatible = "ti,tmp75c"; - reg = <0x48>; - }; - - temp-sensor@49 { - compatible = "ti,tmp75c"; - reg = <0x49>; - }; -}; - -ð0 { - status = "okay"; - managed = "in-band-status"; - phys = <&comphy1 0>; -}; - -ð1 { - phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy0 1>; - sfp = <&sfp_eth1>; -}; - -&usb3 { - status = "okay"; - phys = <&usb2_utmi_otg_phy>; - phy-names = "usb2-utmi-otg-phy"; -}; - -&uart0 { - status = "okay"; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts deleted file mode 100644 index 26804a4875..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * Device Tree file for Globalscale MOCHAbin - * Copyright (C) 2019 Globalscale technologies, Inc. - * Copyright (C) 2021 Sartura Ltd. - * - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include "armada-7040.dtsi" - -/ { - model = "Globalscale MOCHAbin"; - compatible = "globalscale,mochabin", "marvell,armada7040", - "marvell,armada-ap806-quad", "marvell,armada-ap806"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - ethernet3 = &swport1; - ethernet4 = &swport2; - ethernet5 = &swport3; - ethernet6 = &swport4; - }; - - /* SFP+ 10G */ - sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&cp0_i2c1>; - los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; - }; - - /* SFP 1G */ - sfp_eth2: sfp-eth2 { - compatible = "sff,sfp"; - i2c-bus = <&cp0_i2c0>; - los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; - }; -}; - -/* microUSB UART console */ -&uart0 { - status = "okay"; - - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -/* eMMC */ -&ap_sdhci0 { - status = "okay"; - - bus-width = <4>; - non-removable; - /delete-property/ marvell,xenon-phy-slow-mode; - no-1-8-v; -}; - -&cp0_pinctrl { - cp0_uart0_pins: cp0-uart0-pins { - marvell,pins = "mpp6", "mpp7"; - marvell,function = "uart0"; - }; - - cp0_spi0_pins: cp0-spi0-pins { - marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59"; - marvell,function = "spi0"; - }; - - cp0_spi1_pins: cp0-spi1-pins { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - - cp0_i2c0_pins: cp0-i2c0-pins { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - - cp0_i2c1_pins: cp0-i2c1-pins { - marvell,pins = "mpp2", "mpp3"; - marvell,function = "i2c1"; - }; - - pca9554_int_pins: pca9554-int-pins { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - cp0_rgmii1_pins: cp0-rgmii1-pins { - marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - - is31_sdb_pins: is31-sdb-pins { - marvell,pins = "mpp30"; - marvell,function = "gpio"; - }; - - cp0_pcie_reset_pins: cp0-pcie-reset-pins { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - cp0_switch_pins: cp0-switch-pins { - marvell,pins = "mpp0", "mpp1"; - marvell,function = "gpio"; - }; - - cp0_phy_pins: cp0-phy-pins { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; -}; - -/* mikroBUS UART */ -&cp0_uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_uart0_pins>; -}; - -/* mikroBUS SPI */ -&cp0_spi0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; -}; - -/* SPI-NOR */ -&cp0_spi1{ - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi1_pins>; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x3e0000>; - read-only; - }; - - partition@3e0000 { - label = "hw-info"; - reg = <0x3e0000 0x10000>; - read-only; - }; - - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -/* mikroBUS, 1G SFP and GPIO expander */ -&cp0_i2c0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - clock-frequency = <100000>; - - sfp_gpio: pca9554@39 { - compatible = "nxp,pca9554"; - pinctrl-names = "default"; - pinctrl-0 = <&pca9554_int_pins>; - reg = <0x39>; - - interrupt-parent = <&cp0_gpio1>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - gpio-controller; - #gpio-cells = <2>; - - /* - * IO0_0: SFP+_TX_FAULT - * IO0_1: SFP+_TX_DISABLE - * IO0_2: SFP+_PRSNT - * IO0_3: SFP+_LOSS - * IO0_4: SFP_TX_FAULT - * IO0_5: SFP_TX_DISABLE - * IO0_6: SFP_PRSNT - * IO0_7: SFP_LOSS - */ - }; -}; - -/* IS31FL3199, mini-PCIe and 10G SFP+ */ -&cp0_i2c1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c1_pins>; - clock-frequency = <100000>; - - leds@64 { - compatible = "issi,is31fl3199"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&is31_sdb_pins>; - shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>; - reg = <0x64>; - - led1_red: led@1 { - label = "red:led1"; - reg = <1>; - led-max-microamp = <20000>; - }; - - led1_green: led@2 { - label = "green:led1"; - reg = <2>; - }; - - led1_blue: led@3 { - label = "blue:led1"; - reg = <3>; - }; - - led2_red: led@4 { - label = "red:led2"; - reg = <4>; - }; - - led2_green: led@5 { - label = "green:led2"; - reg = <5>; - }; - - led2_blue: led@6 { - label = "blue:led2"; - reg = <6>; - }; - - led3_red: led@7 { - label = "red:led3"; - reg = <7>; - }; - - led3_green: led@8 { - label = "green:led3"; - reg = <8>; - }; - - led3_blue: led@9 { - label = "blue:led3"; - reg = <9>; - }; - }; -}; - -&cp0_mdio { - status = "okay"; - - /* 88E1512 PHY */ - eth2phy: ethernet-phy@1 { - reg = <1>; - sfp = <&sfp_eth2>; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_phy_pins>; - reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>; - }; - - /* 88E6141 Topaz switch */ - switch: switch@3 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_switch_pins>; - reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>; - - interrupt-parent = <&cp0_gpio1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - swport1: port@1 { - reg = <1>; - label = "lan0"; - phy-handle = <&swphy1>; - }; - - swport2: port@2 { - reg = <2>; - label = "lan1"; - phy-handle = <&swphy2>; - }; - - swport3: port@3 { - reg = <3>; - label = "lan2"; - phy-handle = <&swphy3>; - }; - - swport4: port@4 { - reg = <4>; - label = "lan3"; - phy-handle = <&swphy4>; - }; - - port@5 { - reg = <5>; - ethernet = <&cp0_eth1>; - phy-mode = "2500base-x"; - managed = "in-band-status"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - swphy1: swphy1@17 { - reg = <17>; - }; - - swphy2: swphy2@18 { - reg = <18>; - }; - - swphy3: swphy3@19 { - reg = <19>; - }; - - swphy4: swphy4@20 { - reg = <20>; - }; - }; - }; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* 10G SFP+ */ -&cp0_eth0 { - status = "okay"; - - phy-mode = "10gbase-r"; - phys = <&cp0_comphy4 0>; - managed = "in-band-status"; - sfp = <&sfp_eth0>; -}; - -/* Topaz switch uplink */ -&cp0_eth1 { - status = "okay"; - - phy-mode = "2500base-x"; - phys = <&cp0_comphy0 1>; - - fixed-link { - speed = <2500>; - full-duplex; - }; -}; - -/* 1G SFP or 1G RJ45 */ -&cp0_eth2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_rgmii1_pins>; - - phy = <ð2phy>; - phy-mode = "rgmii-id"; -}; - -/* SMSC USB5434B hub */ -&cp0_usb3_0 { - status = "okay"; - - phys = <&cp0_comphy1 0>; - phy-names = "cp0-usb3h0-comphy"; -}; - -/* miniPCI-E USB */ -&cp0_usb3_1 { - status = "okay"; -}; - -&cp0_sata0 { - status = "okay"; - - /* 7 + 12 SATA connector (J24) */ - sata-port@0 { - phys = <&cp0_comphy2 0>; - phy-names = "cp0-sata0-0-phy"; - }; - - /* M.2-2250 B-key (J39) */ - sata-port@1 { - phys = <&cp0_comphy3 1>; - phy-names = "cp0-sata0-1-phy"; - }; -}; - -/* miniPCI-E (J5) */ -&cp0_pcie2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_pcie_reset_pins>; - phys = <&cp0_comphy5 2>; - phy-names = "cp0-pcie2-x1-phy"; - reset-gpio = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; - ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts deleted file mode 100644 index b5cc630781..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts +++ /dev/null @@ -1,513 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright SolidRun Ltd. - * Copyright (C) 2024 Tobias Schramm <tobias@t-sys.eu> - * - * Device tree for the CN9130-based ClearFog Pro - */ - -#include "cn9130.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "SolidRun ClearFog Pro"; - compatible = "solidrun,clearfog-pro", "marvell,armada-ap807-quad", - "marvell,armada-ap807"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - gpio1 = &cp0_gpio1; - gpio2 = &cp0_gpio2; - i2c0 = &cp0_i2c0; - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - spi1 = &cp0_spi1; - }; - - memory@00000000 { - reg = <0x0 0x0 0x1 0x0>; - device_type = "memory"; - }; - - /* Virtual regulator, root of power tree */ - vin: regulator-vin { - compatible = "regulator-fixed"; - regulator-name = "vin"; - regulator-always-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* Regulators supplied by vin */ - v_5v0: regulator-v_5v0 { - compatible = "regulator-fixed"; - regulator-name = "v_5v0"; - regulator-always-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vin>; - }; - - v_3v3: regulator-v_3v3 { - compatible = "regulator-fixed"; - regulator-name = "v_3v3"; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vin>; - }; - - /* Regulators supplied by v_5v0 */ - v_1v8: regulator-v_1v8 { - compatible = "regulator-fixed"; - regulator-name = "v_1v8"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&v_5v0>; - }; - - v_5v0_usb3_hst_vbus: regulator-v_5v0_usb3_hst_vbus { - compatible = "regulator-fixed"; - regulator-name = "v_5v0_usb3_hst_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&expander0 6 GPIO_ACTIVE_LOW>; - vin-supply = <&v_5v0>; - }; - - /* Regulators internal to SOM */ - vqmmc: regulator-vqmmc { - compatible = "regulator-fixed"; - regulator-name = "vqmmc"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&v_5v0>; - }; - - cp0_usb3_0_phy1: cp0_usb3_phy@1 { - compatible = "usb-nop-xceiv"; - vbus-supply = <&v_5v0_usb3_hst_vbus>; - }; - - cp0_sfp_eth0: sfp-eth@0 { - compatible = "sff,sfp"; - i2c-bus = <&cp0_i2c1>; - los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <2000>; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_button_pin>; - - reset { - label = "Reset"; - linux,code = <KEY_RESTART>; - gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -/* on-board eMMC */ -&ap_sdhci0 { - bus-width = <8>; - pinctrl-names = "default"; - vqmmc-supply = <&vqmmc>; - status = "okay"; -}; - -&cp0_crypto { - status = "okay"; -}; - -&cp0_ethernet { - status = "okay"; -}; - -&cp0_gpio1 { - status = "okay"; -}; - -&cp0_gpio2 { - status = "okay"; -}; - -&cp0_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - clock-frequency = <100000>; - - /* - * PCA9655 GPIO expander, up to 1MHz clock. - * 0-CON3 CLKREQ# - * 1-CON3 PERST# - * 2-CON2 PERST# - * 3-CON3 W_DISABLE - * 4-CON2 CLKREQ# - * 5-USB3 overcurrent - * 6-USB3 power - * 7-CON2 W_DISABLE - * 8-JP4 P1 - * 9-JP4 P4 - * 10-JP4 P5 - * 11-m.2 DEVSLP - * 12-SFP_LOS - * 13-SFP_TX_FAULT - * 14-SFP_TX_DISABLE - * 15-SFP_MOD_DEF0 - */ - expander0: gpio-expander@20 { - compatible = "nxp,pca9555"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&cp0_gpio1>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_expander0_pins>; - vcc-supply = <&v_3v3>; - - pcie1_0_clkreq { - gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie1.0-clkreq"; - }; - - pcie1_0_w_disable { - gpio-hog; - gpios = <3 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie1.0-w-disable"; - }; - - pcie2_0_clkreq { - gpio-hog; - gpios = <4 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie2.0-clkreq"; - }; - - pcie2_0_w_disable { - gpio-hog; - gpios = <7 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie2.0-w-disable"; - }; - - usb3_ilimit { - gpio-hog; - gpios = <5 GPIO_ACTIVE_LOW>; - input; - line-name = "usb3-current-limit"; - }; - - m2_devslp { - gpio-hog; - gpios = <11 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "m.2 devslp"; - }; - }; - - /* ADC only for mikroBUS connector */ - mcp3021@4c { - compatible = "microchip,mcp3021"; - reg = <0x4c>; - }; - - /* EEPROM on the SOM */ - eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - read-only; - - nvmem-layout { - compatible = "onie,tlv-layout"; - - onie_tlv_macaddr: mac-address { - #nvmem-cell-cells = <1>; - }; - }; - }; -}; - -/* SMBUS on mini PCIe sockets */ -&cp0_i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c1_pins>; - clock-frequency = <100000>; -}; - -&cp0_mdio { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - /* Green led blinks on activity, orange LED on link */ - marvell,reg-init = <3 16 0 0x0064>; - }; - - switch@4 { - compatible = "marvell,mv88e6085"; - reg = <4>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&cp0_gpio1>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_dsa0_pins>; - reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>; - - mdio-external { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - - /* 88E1512 PHY */ - port6_phy: ethernet-phy@1 { - reg = <1>; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan5"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - }; - - port@5 { - reg = <5>; - ethernet = <&cp0_eth1>; - label = "cpu"; - phy-mode = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@6 { - /* 88E1512 external phy */ - reg = <6>; - label = "lan6"; - phy-handle = <&port6_phy>; - phy-mode = "rgmii-id"; - }; - }; - }; -}; - -/* SRDS #0 - SATA on bottom M.2 B-Key connector */ -&cp0_sata0 { - status = "okay"; - - sata-port@0 { - status = "disabled"; - }; - - sata-port@1 { - phys = <&cp0_comphy0 1>; - target-supply = <&v_3v3>; - }; -}; - -&cp0_utmi { - status = "okay"; -}; - -/* mini PCIe slot far from SOM, USB 2.0 only, SS lanes unused */ -&cp0_usb3_0 { - status = "okay"; - phys = <&cp0_utmi0>; - phy-names = "utmi"; - dr_mode = "host"; -}; - -/* SRDS #1 - USB-A 3.0 host port */ -&cp0_usb3_1 { - status = "okay"; - phys = <&cp0_utmi1>, <&cp0_comphy1 0>; - phy-names = "utmi", "usb"; - usb-phy = <&cp0_usb3_0_phy1>; - dr_mode = "host"; -}; - -/* SRDS #2 - SFP+ 10GE */ -&cp0_eth0 { - status = "okay"; - phy-mode = "10gbase-r"; - phys = <&cp0_comphy2 0>; - managed = "in-band-status"; - nvmem-cells = <&onie_tlv_macaddr 0>; - nvmem-cell-names = "mac-address"; - sfp = <&cp0_sfp_eth0>; -}; - -/* SRDS #3 - SGMII 1GE to L2 switch */ -&cp0_eth1 { - status = "okay"; - phys = <&cp0_comphy3 1>; - phy-mode = "sgmii"; - nvmem-cells = <&onie_tlv_macaddr 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -/* SRDS #4 - mini PCIe slot near SOM */ -&cp0_pcie1 { - status = "okay"; - phys = <&cp0_comphy4 1>; - num-lanes = <1>; - reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; -}; - -/* SRDS #5 - mini PCIe slot far from SOM */ -&cp0_pcie2 { - status = "okay"; - phys = <&cp0_comphy5 2>; - num-lanes = <1>; - reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; -}; - -/* GE PHY RGMII */ -&cp0_eth2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_ge2_rgmii_pins>; - phy = <&phy0>; - phy-mode = "rgmii-id"; - nvmem-cells = <&onie_tlv_macaddr 2>; - nvmem-cell-names = "mac-address"; -}; - -/* micro SD card slot */ -&cp0_sdhci0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_sdhci_pins &cp0_sdhci_cd_pins>; - bus-width = <4>; - cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; - no-1-8-v; - vqmmc-supply = <&v_3v3>; - vmmc-supply = <&v_3v3>; -}; - -&cp0_spi1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi1_pins>; - - spi-flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; - #address-cells = <0x1>; - #size-cells = <0x1>; - spi-max-frequency = <10000000>; - }; -}; - -&cp0_syscon0 { - cp0_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - - cp0_i2c0_pins: cp0-i2c0-pins { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - - cp0_i2c1_pins: cp0-i2c1-pins { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - - cp0_ge2_rgmii_pins: cp0-ge2-rgmii-pins { - marvell,pins = "mpp44", "mpp45", "mpp46", - "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", - "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - - cp0_sdhci_cd_pins: cp0-sdhci-cd-pins { - marvell,pins = "mpp43"; - marvell,function = "sdio"; - }; - - cp0_sdhci_pins: cp0-sdhci-pins { - marvell,pins = "mpp56", "mpp57", "mpp58", - "mpp59", "mpp60", "mpp61"; - marvell,function = "sdio"; - }; - - cp0_spi1_pins: cp0-spi1-pins { - marvell,pins = "mpp12", "mpp13", "mpp14", - "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - - cp0_dsa0_pins: cp0-dsa0-pins { - marvell,pins = "mpp27", "mpp29"; - marvell,function = "gpio"; - }; - - cp0_button_pin: cp0-button-pin { - marvell,pins = "mpp32"; - marvell,function = "gpio"; - }; - - cp0_expander0_pins: cp0-expander0-pins { - marvell,pins = "mpp4"; - marvell,function = "gpio"; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts deleted file mode 100644 index d214853f1b..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts +++ /dev/null @@ -1,410 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Copyright (C) 2019 Marvell International Ltd. - * - * Device tree for the CN9131-DB board. - */ - -#include "cn9130.dtsi" -#include "puzzle-thermal.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "iEi Puzzle-M901"; - compatible = "iei,puzzle-m901", - "marvell,armada-ap807-quad", "marvell,armada-ap807"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - i2c0 = &cp1_i2c0; - i2c1 = &cp0_i2c0; - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - ethernet3 = &cp1_eth0; - ethernet4 = &cp1_eth1; - ethernet5 = &cp1_eth2; - gpio1 = &cp0_gpio1; - gpio2 = &cp0_gpio2; - gpio3 = &cp1_gpio1; - gpio4 = &cp1_gpio2; - led-boot = &led_power; - led-failsafe = &led_info; - led-running = &led_power; - led-upgrade = &led_info; - }; - - memory@00000000 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - gpio_keys { - compatible = "gpio-keys"; - - reset { - label = "Reset"; - linux,code = <KEY_RESTART>; - gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -&cp0_uart0 { - status = "okay"; - - puzzle-mcu { - compatible = "iei,wt61p803-puzzle"; - #address-cells = <1>; - #size-cells = <1>; - current-speed = <115200>; - enable-beep; - status = "okay"; - - leds { - compatible = "iei,wt61p803-puzzle-leds"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - led@0 { - reg = <0>; - label = "white:network"; - active-low; - }; - - led@1 { - reg = <1>; - label = "green:cloud"; - active-low; - }; - - led_info: led@2 { - reg = <2>; - label = "orange:info"; - active-low; - }; - - led_power: led@3 { - reg = <3>; - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_YELLOW>; - active-low; - default-state = "on"; - }; - }; - - hwmon { - compatible = "iei,wt61p803-puzzle-hwmon"; - #address-cells = <1>; - #size-cells = <0>; - - chassis_fan_group0: fan-group@0 { - #cooling-cells = <2>; - reg = <0x00>; - cooling-levels = <0 159 195 211 223 241 255>; - }; - }; - }; -}; - -&ap_thermal_ic { - PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0); -}; - -&cp0_thermal_ic { - PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0); -}; - -/* on-board eMMC - U9 */ -&ap_sdhci0 { - pinctrl-names = "default"; - bus-width = <8>; - status = "okay"; - mmc-ddr-1_8v; - mmc-hs400-1_8v; -}; - -&cp0_crypto { - status = "okay"; -}; - -&cp0_xmdio { - status = "okay"; - cp0_nbaset_phy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - }; - cp0_nbaset_phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - cp0_nbaset_phy2: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - }; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* SLM-1521-V2, CON9 */ -&cp0_eth0 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy2 0>; - phy = <&cp0_nbaset_phy0>; -}; - -&cp0_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy4 1>; - phy = <&cp0_nbaset_phy1>; -}; - -&cp0_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy5 2>; - phy = <&cp0_nbaset_phy2>; -}; - -&cp0_gpio1 { - status = "okay"; -}; - -&cp0_gpio2 { - status = "okay"; -}; - -&cp0_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - status = "okay"; - clock-frequency = <100000>; - rtc@32 { - compatible = "epson,rx8130"; - reg = <0x32>; - wakeup-source; - }; -}; - -/* SLM-1521-V2, CON6 */ -&cp0_pcie0 { - status = "okay"; - num-lanes = <2>; - num-viewport = <8>; - phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>; -}; - -/* U55 */ -&cp0_spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; - reg = <0x700680 0x50>, /* control */ - <0x2000000 0x1000000>; /* CS0 */ - status = "okay"; - spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-max-frequency = <40000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "U-Boot"; - reg = <0x0 0x1f0000>; - }; - partition@1f0000 { - label = "U-Boot ENV Factory"; - reg = <0x1f0000 0x10000>; - }; - partition@200000 { - label = "Reserved"; - reg = <0x200000 0x1f0000>; - }; - partition@3f0000 { - label = "U-Boot ENV"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -&cp0_rtc { - status = "disabled"; -}; - -&cp0_syscon0 { - cp0_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp0_i2c0_pins: cp0-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp0_i2c1_pins: cp0-i2c-pins-1 { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { - marvell,pins = "mpp0", "mpp1", "mpp2", - "mpp3", "mpp4", "mpp5", - "mpp6", "mpp7", "mpp8", - "mpp9", "mpp10", "mpp11"; - marvell,function = "ge0"; - }; - cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { - marvell,pins = "mpp44", "mpp45", "mpp46", - "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", - "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - cp0_spi0_pins: cp0-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - }; -}; - -/* - * Instantiate the first connected CP115 - */ - -#define CP11X_NAME cp1 -#define CP11X_BASE f6000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f6600000 -#define CP11X_PCIE1_BASE f6620000 -#define CP11X_PCIE2_BASE f6640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp1_crypto { - status = "okay"; -}; - -&cp1_xmdio { - status = "okay"; - cp1_nbaset_phy0: ethernet-phy@3 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - }; - cp1_nbaset_phy1: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - cp1_nbaset_phy2: ethernet-phy@5 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - }; -}; - -&cp1_ethernet { - status = "okay"; -}; - -/* CON50 */ -&cp1_eth0 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy2 0>; - phy = <&cp1_nbaset_phy0>; -}; - -&cp1_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy4 1>; - phy = <&cp1_nbaset_phy1>; -}; - -&cp1_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy5 2>; - phy = <&cp1_nbaset_phy2>; -}; - -&cp1_sata0 { - status = "okay"; - sata-port@1 { - status = "okay"; - phys = <&cp1_comphy0 1>; - }; -}; - -&cp1_gpio1 { - status = "okay"; -}; - -&cp1_gpio2 { - status = "okay"; -}; - -&cp1_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_i2c0_pins>; - clock-frequency = <100000>; -}; - -&cp1_rtc { - status = "disabled"; -}; - -&cp1_syscon0 { - cp1_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp1_i2c0_pins: cp1-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp1_spi0_pins: cp1-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - cp1_sfp_pins: sfp-pins { - marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; - marvell,function = "gpio"; - }; - }; -}; - -&cp1_thermal_ic { - PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0); -}; - -&cp1_usb3_1 { - status = "okay"; - phys = <&cp1_comphy3 1>; - phy-names = "usb"; -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts deleted file mode 100644 index 8c775e4a4f..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts +++ /dev/null @@ -1,580 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Copyright (C) 2019 Marvell International Ltd. - * - * Device tree for the CN9132-DB board. - */ - -#include "cn9130.dtsi" -#include "puzzle-thermal.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "iEi Puzzle-M902"; - compatible = "iei,puzzle-m902", - "marvell,armada-ap807-quad", "marvell,armada-ap807"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - i2c0 = &cp1_i2c0; - i2c1 = &cp0_i2c0; - gpio1 = &cp0_gpio1; - gpio2 = &cp0_gpio2; - gpio3 = &cp1_gpio1; - gpio4 = &cp1_gpio2; - gpio5 = &cp2_gpio1; - gpio6 = &cp2_gpio2; - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - ethernet3 = &cp1_eth0; - ethernet4 = &cp1_eth1; - ethernet5 = &cp1_eth2; - ethernet6 = &cp2_eth0; - ethernet7 = &cp2_eth1; - ethernet8 = &cp2_eth2; - spi1 = &cp0_spi0; - spi2 = &cp0_spi1; - led-boot = &led_power; - led-failsafe = &led_info; - led-running = &led_power; - led-upgrade = &led_info; - }; - - memory@00000000 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - gpio_keys { - compatible = "gpio-keys"; - - reset { - label = "Reset"; - linux,code = <KEY_RESTART>; - gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>; - }; - }; - - cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { - compatible = "regulator-fixed"; - regulator-name = "cp2-xhci0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - cp2_usb3_0_phy0: cp2_usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp2_reg_usb3_vbus0>; - }; - - cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { - compatible = "regulator-fixed"; - regulator-name = "cp2-xhci1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - cp2_usb3_0_phy1: cp2_usb3_phy1 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp2_reg_usb3_vbus1>; - }; - - cp2_sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&cp2_sfpp0_i2c>; - los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; -}; - -&uart0 { - status = "okay"; -}; - -&cp0_uart0 { - status = "okay"; - - puzzle-mcu { - compatible = "iei,wt61p803-puzzle"; - #address-cells = <1>; - #size-cells = <1>; - current-speed = <115200>; - enable-beep; - status = "okay"; - - leds { - compatible = "iei,wt61p803-puzzle-leds"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - led@0 { - reg = <0>; - label = "white:network"; - active-low; - }; - - led@1 { - reg = <1>; - label = "green:cloud"; - active-low; - }; - - led_info: led@2 { - reg = <2>; - label = "orange:info"; - active-low; - }; - - led_power: led@3 { - reg = <3>; - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_YELLOW>; - active-low; - default-state = "on"; - }; - }; - - hwmon { - compatible = "iei,wt61p803-puzzle-hwmon"; - #address-cells = <1>; - #size-cells = <0>; - - chassis_fan_group0: fan-group@0 { - #cooling-cells = <2>; - reg = <0x00>; - cooling-levels = <0 159 195 211 223 241 255>; - }; - }; - }; -}; - -&ap_thermal_ic { - PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0); -}; - -&cp0_thermal_ic { - PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0); -}; - - -/* on-board eMMC - U9 */ -&ap_sdhci0 { - pinctrl-names = "default"; - bus-width = <8>; - status = "okay"; - mmc-ddr-1_8v; - mmc-hs400-1_8v; -}; - -&cp0_crypto { - status = "okay"; -}; - -&cp0_xmdio { - status = "okay"; - cp0_nbaset_phy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - }; - cp0_nbaset_phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - cp0_nbaset_phy2: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - }; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* SLM-1521-V2, CON9 */ -&cp0_eth0 { - status = "okay"; - phy-mode = "10gbase-kr"; - phys = <&cp0_comphy2 0>; - phy = <&cp0_nbaset_phy0>; -}; - -&cp0_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy4 1>; - phy = <&cp0_nbaset_phy1>; -}; - -&cp0_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy1 2>; - phy = <&cp0_nbaset_phy2>; -}; - -&cp0_gpio1 { - status = "okay"; -}; - -&cp0_gpio2 { - status = "okay"; -}; - -&cp0_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - status = "okay"; - clock-frequency = <100000>; - rtc@32 { - compatible = "epson,rx8130"; - reg = <0x32>; - wakeup-source; - }; -}; - -&cp0_i2c1 { - clock-frequency = <100000>; -}; - -/* SLM-1521-V2, CON6 */ -&cp0_sata0 { - status = "okay"; - sata-port@1 { - status = "okay"; - phys = <&cp0_comphy0 1>; - }; -}; - -&cp0_pcie2 { - status = "okay"; - num-lanes = <1>; - num-viewport = <8>; - phys = <&cp0_comphy5 2>; -}; - -/* U55 */ -&cp0_spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; - reg = <0x700680 0x50>, /* control */ - <0x2000000 0x1000000>; /* CS0 */ - status = "okay"; - spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-max-frequency = <40000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "U-Boot"; - reg = <0x0 0x1f0000>; - }; - partition@1f0000 { - label = "U-Boot ENV Factory"; - reg = <0x1f0000 0x10000>; - }; - partition@200000 { - label = "Reserved"; - reg = <0x200000 0x1f0000>; - }; - partition@3f0000 { - label = "U-Boot ENV"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -&cp0_rtc { - status = "disabled"; -}; - -&cp0_syscon0 { - cp0_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp0_i2c0_pins: cp0-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp0_i2c1_pins: cp0-i2c-pins-1 { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { - marvell,pins = "mpp0", "mpp1", "mpp2", - "mpp3", "mpp4", "mpp5", - "mpp6", "mpp7", "mpp8", - "mpp9", "mpp10", "mpp11"; - marvell,function = "ge0"; - }; - cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { - marvell,pins = "mpp44", "mpp45", "mpp46", - "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", - "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - cp0_spi0_pins: cp0-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - }; -}; - -&cp0_usb3_1 { - status = "okay"; - phys = <&cp0_comphy3 1>; - phy-names = "usb"; -}; - -/* - * Instantiate the first connected CP115 - */ - -#define CP11X_NAME cp1 -#define CP11X_BASE f4000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f4600000 -#define CP11X_PCIE1_BASE f4620000 -#define CP11X_PCIE2_BASE f4640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp1_crypto { - status = "okay"; -}; - -&cp1_xmdio { - status = "okay"; - cp1_nbaset_phy0: ethernet-phy@3 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - }; - cp1_nbaset_phy1: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - cp1_nbaset_phy2: ethernet-phy@5 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - }; -}; - -&cp1_ethernet { - status = "okay"; -}; - -/* CON50 */ -&cp1_eth0 { - status = "okay"; - phy-mode = "10gbase-kr"; - phys = <&cp1_comphy2 0>; - phy = <&cp1_nbaset_phy0>; -}; - -&cp1_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy4 1>; - phy = <&cp1_nbaset_phy1>; -}; - -&cp1_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy1 2>; - phy = <&cp1_nbaset_phy2>; -}; - -&cp1_gpio1 { - status = "okay"; -}; - -&cp1_gpio2 { - status = "okay"; -}; - -&cp1_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_i2c0_pins>; - clock-frequency = <100000>; -}; - -&cp1_rtc { - status = "disabled"; -}; - -&cp1_syscon0 { - cp1_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp1_i2c0_pins: cp1-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp1_spi0_pins: cp1-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - }; -}; - -&cp1_thermal_ic { - PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0); -}; - -/* - * Instantiate the second connected CP115 - */ - -#define CP11X_NAME cp2 -#define CP11X_BASE f6000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f6600000 -#define CP11X_PCIE1_BASE f6620000 -#define CP11X_PCIE2_BASE f6640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp2_crypto { - status = "okay"; -}; - -&cp2_ethernet { - status = "okay"; -}; - -&cp2_xmdio { - status = "okay"; - cp2_nbaset_phy0: ethernet-phy@6 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - }; - cp2_nbaset_phy1: ethernet-phy@7 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - cp2_nbaset_phy2: ethernet-phy@8 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - }; -}; - -/* SLM-1521-V2, CON9 */ -&cp2_eth0 { - status = "okay"; - phy-mode = "10gbase-kr"; - phys = <&cp2_comphy2 0>; - phy = <&cp2_nbaset_phy0>; -}; - -&cp2_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp2_comphy4 1>; - phy = <&cp2_nbaset_phy1>; -}; - -&cp2_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp2_comphy1 2>; - phy = <&cp2_nbaset_phy2>; -}; - -&cp2_gpio1 { - status = "okay"; -}; - -&cp2_gpio2 { - status = "okay"; -}; - -&cp2_i2c0 { - clock-frequency = <100000>; - /* SLM-1521-V2 - U3 */ - i2c-mux@72 { - compatible = "nxp,pca9544"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72>; - cp2_sfpp0_i2c: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - /* U12 */ - cp2_module_expander1: pca9555@21 { - compatible = "nxp,pca9555"; - pinctrl-names = "default"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x21>; - }; - }; - }; -}; - -&cp2_rtc { - status = "disabled"; -}; - -&cp2_syscon0 { - cp2_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp2_i2c0_pins: cp2-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - }; -}; - -&cp2_thermal_ic { - PUZZLE_FAN_THERMAL(cp2, &chassis_fan_group0); -}; diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi deleted file mode 100644 index ea79ab224e..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi +++ /dev/null @@ -1,68 +0,0 @@ -#define PUZZLE_FAN_THERMAL(_cname, _fan) \ - polling-delay-passive = <500>; \ - polling-delay = <1000>; \ - \ - trips { \ - cpu-hot { \ - temperature = <75000>; \ - hysteresis = <5000>; \ - type = "hot"; \ - }; \ - _cname##_active_full: cpu-active-full { \ - temperature = <70000>; \ - hysteresis = <5000>; \ - type = "active"; \ - }; \ - _cname##_active_high: cpu-active-high { \ - temperature = <65000>; \ - hysteresis = <5000>; \ - type = "active"; \ - }; \ - _cname##_active_med: cpu-active-med { \ - temperature = <62500>; \ - hysteresis = <3000>; \ - type = "active"; \ - }; \ - _cname##_active_low: cpu-active-low { \ - temperature = <60000>; \ - hysteresis = <3000>; \ - type = "active"; \ - }; \ - _cname##_active_min: cpu-active-min { \ - temperature = <55000>; \ - hysteresis = <5000>; \ - type = "active"; \ - }; \ - _cname##_active_idle: cpu-active-idle { \ - temperature = <50000>; \ - hysteresis = <5000>; \ - type = "active"; \ - }; \ - }; \ - cooling-maps { \ - cpu-active-full { \ - trip = <&_cname##_active_full>; \ - cooling-device = <_fan THERMAL_NO_LIMIT \ - THERMAL_NO_LIMIT>; \ - }; \ - cpu-active-high { \ - trip = <&_cname##_active_high>; \ - cooling-device = <_fan 4 5>; \ - }; \ - cpu-active-med { \ - trip = <&_cname##_active_med>; \ - cooling-device = <_fan 3 4>; \ - }; \ - cpu-active-low { \ - trip = <&_cname##_active_low>; \ - cooling-device = <_fan 2 3>; \ - }; \ - cpu-active-min { \ - trip = <&_cname##_active_min>; \ - cooling-device = <_fan 1 2>; \ - }; \ - cpu-active-idle { \ - trip = <&_cname##_active_idle>; \ - cooling-device = <_fan 0 0>; \ - }; \ - } diff --git a/target/linux/mvebu/image/cortexa9.mk b/target/linux/mvebu/image/cortexa9.mk index 270c631474..7c68740e11 100644 --- a/target/linux/mvebu/image/cortexa9.mk +++ b/target/linux/mvebu/image/cortexa9.mk @@ -3,9 +3,7 @@ # Copyright (C) 2012-2016 OpenWrt.org # Copyright (C) 2016 LEDE-project.org -ifneq ($(KERNEL),6.1) DTS_DIR := $(DTS_DIR)/marvell -endif define Build/fortigate-header ( \ diff --git a/target/linux/mvebu/patches-6.1/000-cpufreq-armada-8k-add-ap807-support.patch b/target/linux/mvebu/patches-6.1/000-cpufreq-armada-8k-add-ap807-support.patch deleted file mode 100644 index 354d262015..0000000000 --- a/target/linux/mvebu/patches-6.1/000-cpufreq-armada-8k-add-ap807-support.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 8eec6e740b564ec5e1da59ab7070b89aa23c9973 Mon Sep 17 00:00:00 2001 -From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> -Date: Fri, 16 Jun 2023 12:41:30 +0100 -Subject: [PATCH] cpufreq: armada-8k: add ap807 support - -Add support for the Armada AP807 die to armada-8k. This uses a -different compatible for the CPU clock which needs to be added to -the cpufreq driver. - -This commit takes a different approach to the WindRiver patch -"cpufreq: armada: enable ap807-cpu-clk" in that rather than calling -of_find_compatible_node() for each compatible, we use a table of -IDs instead. - -Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> -Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> ---- - drivers/cpufreq/armada-8k-cpufreq.c | 16 +++++++++------- - 1 file changed, 9 insertions(+), 7 deletions(-) - ---- a/drivers/cpufreq/armada-8k-cpufreq.c -+++ b/drivers/cpufreq/armada-8k-cpufreq.c -@@ -21,6 +21,13 @@ - #include <linux/pm_opp.h> - #include <linux/slab.h> - -+static const struct of_device_id __maybe_unused armada_8k_cpufreq_of_match[] = { -+ { .compatible = "marvell,ap806-cpu-clock" }, -+ { .compatible = "marvell,ap807-cpu-clock" }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, armada_8k_cpufreq_of_match); -+ - /* - * Setup the opps list with the divider for the max frequency, that - * will be filled at runtime. -@@ -127,7 +134,8 @@ static int __init armada_8k_cpufreq_init - struct device_node *node; - struct cpumask cpus; - -- node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock"); -+ node = of_find_matching_node_and_match(NULL, armada_8k_cpufreq_of_match, -+ NULL); - if (!node || !of_device_is_available(node)) { - of_node_put(node); - return -ENODEV; -@@ -204,12 +212,6 @@ static void __exit armada_8k_cpufreq_exi - } - module_exit(armada_8k_cpufreq_exit); - --static const struct of_device_id __maybe_unused armada_8k_cpufreq_of_match[] = { -- { .compatible = "marvell,ap806-cpu-clock" }, -- { }, --}; --MODULE_DEVICE_TABLE(of, armada_8k_cpufreq_of_match); -- - MODULE_AUTHOR("Gregory Clement <gregory.clement@bootlin.com>"); - MODULE_DESCRIPTION("Armada 8K cpufreq driver"); - MODULE_LICENSE("GPL"); diff --git a/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch b/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch deleted file mode 100644 index 4936f6ad16..0000000000 --- a/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch +++ /dev/null @@ -1,81 +0,0 @@ -Subject: [PATCH v2] PCI: aardvark: Implement workaround for PCIe Completion Timeout -Date: Tue, 2 Aug 2022 14:38:16 +0200 -Message-Id: <20220802123816.21817-1-pali@kernel.org> -X-Mailer: git-send-email 2.20.1 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -Precedence: bulk -List-ID: <linux-pci.vger.kernel.org> -X-Mailing-List: linux-pci@vger.kernel.org - -Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions -document describes in erratum 3.12 PCIe Completion Timeout (Ref #: 251), -that PCIe IP does not support a strong-ordered model for inbound posted vs. -outbound completion. - -As a workaround for this erratum, DIS_ORD_CHK flag in Debug Mux Control -register must be set. It disables the ordering check in the core between -Completions and Posted requests received from the link. - -Marvell also suggests to do full memory barrier at the beginning of -aardvark summary interrupt handler before calling interrupt handlers of -endpoint drivers in order to minimize the risk for the race condition -documented in the Erratum between the DMA done status reading and the -completion of writing to the host memory. - -More details about this issue and suggested workarounds are in discussion: -https://lore.kernel.org/linux-pci/BN9PR18MB425154FE5019DCAF2028A1D5DB8D9@BN9PR18MB4251.namprd18.prod.outlook.com/t/#u - -It was reported that enabling this workaround fixes instability issues and -"Unhandled fault" errors when using 60 GHz WiFi 802.11ad card with Qualcomm -QCA6335 chip under significant load which were caused by interrupt status -stuck in the outbound CMPLT queue traced back to this erratum. - -This workaround fixes also kernel panic triggered after some minutes of -usage 5 GHz WiFi 802.11ax card with Mediatek MT7915 chip: - - Internal error: synchronous external abort: 96000210 [#1] SMP - Kernel panic - not syncing: Fatal exception in interrupt - -Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> -Signed-off-by: Pali Rohár <pali@kernel.org> -Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") -Cc: stable@vger.kernel.org ---- - drivers/pci/controller/pci-aardvark.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/pci/controller/pci-aardvark.c -+++ b/drivers/pci/controller/pci-aardvark.c -@@ -212,6 +212,8 @@ enum { - }; - - #define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44) -+#define DEBUG_MUX_CTRL_REG (LMI_BASE_ADDR + 0x208) -+#define DIS_ORD_CHK BIT(30) - - /* PCIe core controller registers */ - #define CTRL_CORE_BASE_ADDR 0x18000 -@@ -560,6 +562,11 @@ static void advk_pcie_setup_hw(struct ad - PCIE_CORE_CTRL2_TD_ENABLE; - advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG); - -+ /* Disable ordering checks, workaround for erratum 3.12 "PCIe completion timeout" */ -+ reg = advk_readl(pcie, DEBUG_MUX_CTRL_REG); -+ reg |= DIS_ORD_CHK; -+ advk_writel(pcie, reg, DEBUG_MUX_CTRL_REG); -+ - /* Set lane X1 */ - reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); - reg &= ~LANE_CNT_MSK; -@@ -1661,6 +1668,9 @@ static irqreturn_t advk_pcie_irq_handler - struct advk_pcie *pcie = arg; - u32 status; - -+ /* Full memory barrier (ARM dsb sy), workaround for erratum 3.12 "PCIe completion timeout" */ -+ mb(); -+ - status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG); - if (!(status & PCIE_IRQ_CORE_INT)) - return IRQ_NONE; diff --git a/target/linux/mvebu/patches-6.1/105-power-reset-linkstation-poweroff-add-ls220de.patch b/target/linux/mvebu/patches-6.1/105-power-reset-linkstation-poweroff-add-ls220de.patch deleted file mode 100644 index 3223861234..0000000000 --- a/target/linux/mvebu/patches-6.1/105-power-reset-linkstation-poweroff-add-ls220de.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/drivers/power/reset/linkstation-poweroff.c -+++ b/drivers/power/reset/linkstation-poweroff.c -@@ -142,6 +142,12 @@ static void linkstation_poweroff(void) - } - - static const struct of_device_id ls_poweroff_of_match[] = { -+ { .compatible = "buffalo,ls220d", -+ .data = &linkstation_power_off_cfg, -+ }, -+ { .compatible = "buffalo,ls220de", -+ .data = &linkstation_power_off_cfg, -+ }, - { .compatible = "buffalo,ls421d", - .data = &linkstation_power_off_cfg, - }, diff --git a/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch deleted file mode 100644 index ec6cef800a..0000000000 --- a/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch +++ /dev/null @@ -1,279 +0,0 @@ -From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001 -From: Adrian Panella <ianchi74@outlook.com> -Date: Thu, 9 Mar 2017 09:37:17 +0100 -Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments - -The command-line arguments provided by the boot loader will be -appended to a new device tree property: bootloader-args. -If there is a property "append-rootblock" in DT under /chosen -and a root= option in bootloaders command line it will be parsed -and added to DT bootargs with the form: <append-rootblock>XX. -Only command line ATAG will be processed, the rest of the ATAGs -sent by bootloader will be ignored. -This is usefull in dual boot systems, to get the current root partition -without afecting the rest of the system. - -Signed-off-by: Adrian Panella <ianchi74@outlook.com> - -This patch has been modified to be mvebu specific. The original patch -did not pass the bootloader cmdline on if no append-rootblock stanza -was found, resulting in blank cmdline and failure to boot. - -Signed-off-by: Michael Gray <michael.gray@lantisproject.com> ---- - arch/arm/Kconfig | 11 ++++ - arch/arm/boot/compressed/atags_to_fdt.c | 85 ++++++++++++++++++++++++- - init/main.c | 16 +++++ - 3 files changed, 111 insertions(+), 1 deletion(-) - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1587,6 +1587,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN - The command-line arguments provided by the boot loader will be - appended to the the device tree bootargs property. - -+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ bool "Append rootblock parsing bootloader's kernel arguments" -+ help -+ The command-line arguments provided by the boot loader will be -+ appended to a new device tree property: bootloader-args. -+ If there is a property "append-rootblock" in DT under /chosen -+ and a root= option in bootloaders command line it will be parsed -+ and added to DT bootargs with the form: <append-rootblock>XX. -+ Only command line ATAG will be processed, the rest of the ATAGs -+ sent by bootloader will be ignored. -+ - endchoice - - config CMDLINE ---- a/arch/arm/boot/compressed/atags_to_fdt.c -+++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -5,6 +5,8 @@ - - #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) - #define do_extend_cmdline 1 -+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+#define do_extend_cmdline 1 - #else - #define do_extend_cmdline 0 - #endif -@@ -20,6 +22,7 @@ static int node_offset(void *fdt, const - return offset; - } - -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE - static int setprop(void *fdt, const char *node_path, const char *property, - void *val_array, int size) - { -@@ -28,6 +31,7 @@ static int setprop(void *fdt, const char - return offset; - return fdt_setprop(fdt, offset, property, val_array, size); - } -+#endif - - static int setprop_string(void *fdt, const char *node_path, - const char *property, const char *string) -@@ -38,6 +42,7 @@ static int setprop_string(void *fdt, con - return fdt_setprop_string(fdt, offset, property, string); - } - -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE - static int setprop_cell(void *fdt, const char *node_path, - const char *property, uint32_t val) - { -@@ -46,6 +51,7 @@ static int setprop_cell(void *fdt, const - return offset; - return fdt_setprop_cell(fdt, offset, property, val); - } -+#endif - - static const void *getprop(const void *fdt, const char *node_path, - const char *property, int *len) -@@ -58,6 +64,7 @@ static const void *getprop(const void *f - return fdt_getprop(fdt, offset, property, len); - } - -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE - static uint32_t get_cell_size(const void *fdt) - { - int len; -@@ -69,6 +76,74 @@ static uint32_t get_cell_size(const void - return cell_size; - } - -+#endif -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ -+static char *append_rootblock(char *dest, const char *str, int len, void *fdt) -+{ -+ const char *ptr, *end; -+ const char *root="root="; -+ int i, l; -+ const char *rootblock; -+ -+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually -+ ptr = str - 1; -+ -+ do { -+ //first find an 'r' at the begining or after a space -+ do { -+ ptr++; -+ ptr = strchr(ptr, 'r'); -+ if (!ptr) -+ goto no_append; -+ -+ } while (ptr != str && *(ptr-1) != ' '); -+ -+ //then check for the rest -+ for(i = 1; i <= 4; i++) -+ if(*(ptr+i) != *(root+i)) break; -+ -+ } while (i != 5); -+ -+ end = strchr(ptr, ' '); -+ end = end ? (end - 1) : (strchr(ptr, 0) - 1); -+ -+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX ) -+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); -+ ptr = end + 1; -+ -+ /* if append-rootblock property is set use it to append to command line */ -+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); -+ if (rootblock == NULL) -+ goto no_append; -+ -+ if (*dest != ' ') { -+ *dest = ' '; -+ dest++; -+ len++; -+ } -+ -+ if (len + l + i <= COMMAND_LINE_SIZE) { -+ memcpy(dest, rootblock, l); -+ dest += l - 1; -+ memcpy(dest, ptr, i); -+ dest += i; -+ } -+ -+ return dest; -+ -+no_append: -+ len = strlen(str); -+ if (len + 1 < COMMAND_LINE_SIZE) { -+ memcpy(dest, str, len); -+ dest += len; -+ } -+ -+ return dest; -+} -+#endif -+ - static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) - { - char cmdline[COMMAND_LINE_SIZE]; -@@ -88,18 +163,28 @@ static void merge_fdt_bootargs(void *fdt - - /* and append the ATAG_CMDLINE */ - if (fdt_cmdline) { -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ //save original bootloader args -+ //and append ubi.mtd with root partition number to current cmdline -+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); -+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); -+ -+#else - len = strlen(fdt_cmdline); - if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { - *ptr++ = ' '; - memcpy(ptr, fdt_cmdline, len); - ptr += len; - } -+#endif - } - *ptr = '\0'; - - setprop_string(fdt, "/chosen", "bootargs", cmdline); - } - -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE - static void hex_str(char *out, uint32_t value) - { - uint32_t digit; -@@ -117,6 +202,7 @@ static void hex_str(char *out, uint32_t - } - *out = '\0'; - } -+#endif - - /* - * Convert and fold provided ATAGs into the provided FDT. -@@ -131,9 +217,11 @@ int atags_to_fdt(void *atag_list, void * - struct tag *atag = atag_list; - /* In the case of 64 bits memory size, need to reserve 2 cells for - * address and size for each bank */ -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE - __be32 mem_reg_property[2 * 2 * NR_BANKS]; -- int memcount = 0; -- int ret, memsize; -+ int memsize, memcount = 0; -+#endif -+ int ret; - - /* make sure we've got an aligned pointer */ - if ((u32)atag_list & 0x3) -@@ -168,7 +256,9 @@ int atags_to_fdt(void *atag_list, void * - else - setprop_string(fdt, "/chosen", "bootargs", - atag->u.cmdline.cmdline); -- } else if (atag->hdr.tag == ATAG_MEM) { -+ } -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ else if (atag->hdr.tag == ATAG_MEM) { - if (memcount >= sizeof(mem_reg_property)/4) - continue; - if (!atag->u.mem.size) -@@ -212,6 +302,10 @@ int atags_to_fdt(void *atag_list, void * - setprop(fdt, "/memory", "reg", mem_reg_property, - 4 * memcount * memsize); - } -+#else -+ -+ } -+#endif - - return fdt_pack(fdt); - } ---- a/init/main.c -+++ b/init/main.c -@@ -113,6 +113,10 @@ - - #include <kunit/test.h> - -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+#include <linux/of.h> -+#endif -+ - static int kernel_init(void *); - - extern void init_IRQ(void); -@@ -996,6 +1000,18 @@ asmlinkage __visible void __init __no_sa - page_alloc_init(); - - pr_notice("Kernel command line: %s\n", saved_command_line); -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ //Show bootloader's original command line for reference -+ if(of_chosen) { -+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); -+ if(prop) -+ pr_notice("Bootloader command line (ignored): %s\n", prop); -+ else -+ pr_notice("Bootloader command line not present\n"); -+ } -+#endif -+ - /* parameters may set static keys */ - jump_label_init(); - parse_early_param(); diff --git a/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch b/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch deleted file mode 100644 index b75dcf596a..0000000000 --- a/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/mach-mvebu/Kconfig -+++ b/arch/arm/mach-mvebu/Kconfig -@@ -66,6 +66,7 @@ config MACH_ARMADA_38X - select HAVE_ARM_TWD if SMP - select MACH_MVEBU_V7 - select PINCTRL_ARMADA_38X -+ select ARCH_WANT_LIBATA_LEDS - help - Say 'Y' here if you want your kernel to support boards based - on the Marvell Armada 380/385 SoC with device tree. diff --git a/target/linux/mvebu/patches-6.1/302-add_powertables.patch b/target/linux/mvebu/patches-6.1/302-add_powertables.patch deleted file mode 100644 index d0c0dbeb0c..0000000000 --- a/target/linux/mvebu/patches-6.1/302-add_powertables.patch +++ /dev/null @@ -1,770 +0,0 @@ ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi -@@ -214,11 +214,19 @@ - &pcie1 { - /* Marvell 88W8864, 5GHz-only */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,2ghz = <0>; -+ }; - }; - - &pcie2 { - /* Marvell 88W8864, 2GHz-only */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,5ghz = <0>; -+ }; - }; - - &pinctrl { ---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts -@@ -142,3 +142,205 @@ - }; - }; - }; -+ -+&pcie1 { -+ mwlwifi { -+ marvell,chainmask = <2 2>; -+ marvell,powertable { -+ AU = -+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, -+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, -+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, -+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, -+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>; -+ CA = -+ <36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, -+ <40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, -+ <44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, -+ <48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>; -+ CN = -+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>, -+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>, -+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>, -+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>, -+ <165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>; -+ ETSI = -+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>; -+ FCC = -+ <36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>; -+ }; -+ }; -+}; -+ -+&pcie2 { -+ mwlwifi { -+ marvell,chainmask = <2 2>; -+ marvell,powertable { -+ AU = -+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>; -+ CA = -+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>, -+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>; -+ CN = -+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>; -+ ETSI = -+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>; -+ FCC = -+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts -@@ -142,3 +142,205 @@ - }; - }; - }; -+ -+&pcie1 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ AU = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>; -+ CA = -+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; -+ CN = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>; -+ ETSI = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>; -+ FCC = -+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>, -+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; -+ }; -+ }; -+}; -+ -+&pcie2 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ AU = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ CA = -+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; -+ CN = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ ETSI = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ FCC = -+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts -@@ -142,3 +142,205 @@ - }; - }; - }; -+ -+&pcie1 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ AU = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>; -+ CA = -+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; -+ CN = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>; -+ ETSI = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>; -+ FCC = -+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>, -+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; -+ }; -+ }; -+}; -+ -+&pcie2 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ AU = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ CA = -+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; -+ CN = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ ETSI = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ FCC = -+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts -@@ -157,6 +157,18 @@ - }; - }; - -+&pcie1 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ }; -+}; -+ -+&pcie2 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ }; -+}; -+ - &sdhci { - pinctrl-names = "default"; - pinctrl-0 = <&sdhci_pins>; ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -223,12 +223,100 @@ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,5ghz = <0>; -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ FCC = -+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>; -+ -+ ETSI = -+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>; -+ }; -+ }; - }; - - /* Second mini-PCIe port */ - pcie@3,0 { - /* Port 0, Lane 3 */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,2ghz = <0>; -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ FCC = -+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>; -+ -+ ETSI = -+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>; -+ }; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-6.1/304-revert_i2c_delay.patch b/target/linux/mvebu/patches-6.1/304-revert_i2c_delay.patch deleted file mode 100644 index 930c0f9494..0000000000 --- a/target/linux/mvebu/patches-6.1/304-revert_i2c_delay.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -237,12 +237,10 @@ - }; - - &i2c0 { -- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - }; - - &i2c1 { -- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; - }; - diff --git a/target/linux/mvebu/patches-6.1/305-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-6.1/305-armada-385-rd-mtd-partitions.patch deleted file mode 100644 index 31bd53b1f3..0000000000 --- a/target/linux/mvebu/patches-6.1/305-armada-385-rd-mtd-partitions.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/arm/boot/dts/armada-388-rd.dts -+++ b/arch/arm/boot/dts/armada-388-rd.dts -@@ -103,6 +103,16 @@ - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0 0x400000>; -+ }; -+ -+ partition@1 { -+ label = "firmware"; -+ reg = <0x400000 0xc00000>; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch deleted file mode 100644 index aee033d21f..0000000000 --- a/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Tue, 13 Jan 2015 11:14:09 +0100 -Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions - -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> ---- - arch/arm/boot/dts/armada-385-db-ap.dts | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/armada-385-db-ap.dts -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -218,19 +218,19 @@ - #size-cells = <1>; - - partition@0 { -- label = "U-Boot"; -+ label = "u-boot"; - reg = <0x00000000 0x00800000>; - read-only; - }; - - partition@800000 { -- label = "uImage"; -+ label = "kernel"; - reg = <0x00800000 0x00400000>; - read-only; - }; - - partition@c00000 { -- label = "Root"; -+ label = "ubi"; - reg = <0x00c00000 0x3f400000>; - }; - }; diff --git a/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch b/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch deleted file mode 100644 index fc6d6239ca..0000000000 --- a/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -483,3 +483,7 @@ - }; - }; - }; -+ -+&coherencyfab { -+ broken-idle; -+}; diff --git a/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch b/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch deleted file mode 100644 index 389e03742e..0000000000 --- a/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -385,7 +385,7 @@ - - port@4 { - reg = <4>; -- label = "internet"; -+ label = "wan"; - }; - - port@5 { diff --git a/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch b/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch deleted file mode 100644 index 0ef15f2943..0000000000 --- a/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi -@@ -14,6 +14,13 @@ - compatible = "linksys,armada385", "marvell,armada385", - "marvell,armada380"; - -+ aliases { -+ led-boot = &led_power; -+ led-failsafe = &led_power; -+ led-running = &led_power; -+ led-upgrade = &led_power; -+ }; -+ - chosen { - stdout-path = "serial0:115200n8"; - }; -@@ -71,7 +78,7 @@ - pinctrl-0 = <&gpio_leds_pins>; - pinctrl-names = "default"; - -- power { -+ led_power: power { - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -26,6 +26,13 @@ - compatible = "linksys,mamba", "marvell,armadaxp-mv78230", - "marvell,armadaxp", "marvell,armada-370-xp"; - -+ aliases { -+ led-boot = &led_power; -+ led-failsafe = &led_power; -+ led-running = &led_power; -+ led-upgrade = &led_power; -+ }; -+ - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; -@@ -195,7 +202,7 @@ - pinctrl-0 = <&power_led_pin>; - pinctrl-names = "default"; - -- power { -+ led_power: power { - label = "mamba:white:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - default-state = "on"; diff --git a/target/linux/mvebu/patches-6.1/310-linksys-use-eth0-as-cpu-port.patch b/target/linux/mvebu/patches-6.1/310-linksys-use-eth0-as-cpu-port.patch deleted file mode 100644 index 84d49a004b..0000000000 --- a/target/linux/mvebu/patches-6.1/310-linksys-use-eth0-as-cpu-port.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi -@@ -116,7 +116,7 @@ - }; - - ð2 { -- status = "okay"; -+ status = "disabled"; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <2>; -@@ -200,10 +200,10 @@ - label = "wan"; - }; - -- port@5 { -- reg = <5>; -+ port@6 { -+ reg = <6>; - label = "cpu"; -- ethernet = <ð2>; -+ ethernet = <ð0>; - - fixed-link { - speed = <1000>; diff --git a/target/linux/mvebu/patches-6.1/311-adjust-compatible-for-linksys.patch b/target/linux/mvebu/patches-6.1/311-adjust-compatible-for-linksys.patch deleted file mode 100644 index a5d3e63810..0000000000 --- a/target/linux/mvebu/patches-6.1/311-adjust-compatible-for-linksys.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts -@@ -12,8 +12,8 @@ - - / { - model = "Linksys WRT3200ACM"; -- compatible = "linksys,rango", "linksys,armada385", "marvell,armada385", -- "marvell,armada380"; -+ compatible = "linksys,wrt3200acm", "linksys,rango", "linksys,armada385", -+ "marvell,armada385", "marvell,armada380"; - }; - - &expander0 { ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -22,9 +22,10 @@ - #include "armada-xp-mv78230.dtsi" - - / { -- model = "Linksys WRT1900AC"; -- compatible = "linksys,mamba", "marvell,armadaxp-mv78230", -- "marvell,armadaxp", "marvell,armada-370-xp"; -+ model = "Linksys WRT1900AC v1"; -+ compatible = "linksys,wrt1900ac-v1", "linksys,mamba", -+ "marvell,armadaxp-mv78230", "marvell,armadaxp", -+ "marvell,armada-370-xp"; - - aliases { - led-boot = &led_power; ---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts -@@ -9,8 +9,9 @@ - #include "armada-385-linksys.dtsi" - - / { -- model = "Linksys WRT1900ACv2"; -- compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385", -+ model = "Linksys WRT1900AC v2"; -+ compatible = "linksys,wrt1900ac-v2", "linksys,cobra", -+ "linksys,armada385", "marvell,armada385", - "marvell,armada380"; - }; - ---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts -@@ -10,8 +10,8 @@ - - / { - model = "Linksys WRT1200AC"; -- compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385", -- "marvell,armada380"; -+ compatible = "linksys,wrt1200ac", "linksys,caiman", "linksys,armada385", -+ "marvell,armada385", "marvell,armada380"; - }; - - &expander0 { ---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts -@@ -10,7 +10,8 @@ - - / { - model = "Linksys WRT1900ACS"; -- compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385", -+ compatible = "linksys,wrt1900acs", "linksys,shelby", -+ "linksys,armada385", "marvell,armada385", - "marvell,armada380"; - }; - diff --git a/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch deleted file mode 100644 index f52417e83a..0000000000 --- a/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Tue, 29 Nov 2016 10:15:45 +0000 -Subject: ARM: dts: armada388-clearfog: emmc on clearfog base - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - .../arm/boot/dts/armada-388-clearfog-base.dts | 1 + - .../armada-38x-solidrun-microsom-emmc.dtsi | 62 +++++++++++++++++++ - 2 files changed, 63 insertions(+) - create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi - ---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts -+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts -@@ -7,6 +7,7 @@ - - /dts-v1/; - #include "armada-388-clearfog.dtsi" -+#include "armada-38x-solidrun-microsom-emmc.dtsi" - - / { - model = "SolidRun Clearfog Base A1"; ---- /dev/null -+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi -@@ -0,0 +1,62 @@ -+/* -+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC -+ * -+ * Copyright (C) 2015 Russell King -+ * -+ * This board is in development; the contents of this file work with -+ * the A1 rev 2.0 of the board, which does not represent final -+ * production board. Things will change, don't expect this file to -+ * remain compatible info the future. -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+/ { -+ soc { -+ internal-regs { -+ sdhci@d8000 { -+ bus-width = <4>; -+ no-1-8-v; -+ non-removable; -+ pinctrl-0 = <µsom_sdhci_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ wp-inverted; -+ }; -+ }; -+ }; -+}; diff --git a/target/linux/mvebu/patches-6.1/313-helios4-dts-status-led-alias.patch b/target/linux/mvebu/patches-6.1/313-helios4-dts-status-led-alias.patch deleted file mode 100644 index 607f436297..0000000000 --- a/target/linux/mvebu/patches-6.1/313-helios4-dts-status-led-alias.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/arch/arm/boot/dts/armada-388-helios4.dts -+++ b/arch/arm/boot/dts/armada-388-helios4.dts -@@ -15,6 +15,13 @@ - model = "Helios4"; - compatible = "kobol,helios4", "marvell,armada388", - "marvell,armada385", "marvell,armada380"; -+ -+ aliases { -+ led-boot = &led_status; -+ led-failsafe = &led_status; -+ led-running = &led_status; -+ led-upgrade = &led_status; -+ }; - - memory { - device_type = "memory"; -@@ -73,10 +80,9 @@ - pinctrl-names = "default"; - pinctrl-0 = <&helios_system_led_pins>; - -- status-led { -+ led_status: status-led { - label = "helios4:green:status"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; -- linux,default-trigger = "heartbeat"; - default-state = "on"; - }; - diff --git a/target/linux/mvebu/patches-6.1/314-arm64-dts-marvell-enable-heartbeat-LED-by-default.patch b/target/linux/mvebu/patches-6.1/314-arm64-dts-marvell-enable-heartbeat-LED-by-default.patch deleted file mode 100644 index 7221e04de1..0000000000 --- a/target/linux/mvebu/patches-6.1/314-arm64-dts-marvell-enable-heartbeat-LED-by-default.patch +++ /dev/null @@ -1,22 +0,0 @@ -From: Tomasz Maciej Nowak <tmn505@gmail.com> -Date: Fri, 7 Jul 2023 19:06:05 +0200 -Subject: [PATCH] arm64: dts: marvell: enable heartbeat LED by default - -Some boards could be placed in an enclosure, so enable LED18 by default, -since that'll be the only visible indicator that the board is operating. - -Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> ---- - arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts -+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts -@@ -25,6 +25,7 @@ - function = LED_FUNCTION_HEARTBEAT; - color = <LED_COLOR_ID_GREEN>; - linux,default-trigger = "heartbeat"; -+ default-state = "on"; - }; - }; - }; diff --git a/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch b/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch deleted file mode 100644 index c333df2784..0000000000 --- a/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00 2001 -From: Tad <tad@spotco.us> -Date: Fri, 5 Feb 2021 22:32:11 -0500 -Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel - partition to 4MB - -Signed-off-by: Tad Davanzo <tad@spotco.us> ---- - arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -454,9 +454,9 @@ - reg = <0xa00000 0x2800000>; /* 40MB */ - }; - -- partition@d00000 { -+ partition@e00000 { - label = "rootfs1"; -- reg = <0xd00000 0x2500000>; /* 37MB */ -+ reg = <0xe00000 0x2400000>; /* 36MB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ -@@ -465,9 +465,9 @@ - reg = <0x3200000 0x2800000>; /* 40MB */ - }; - -- partition@3500000 { -+ partition@3600000 { - label = "rootfs2"; -- reg = <0x3500000 0x2500000>; /* 37MB */ -+ reg = <0x3600000 0x2400000>; /* 36MB */ - }; - - /* diff --git a/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch b/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch deleted file mode 100644 index b5ed5ece36..0000000000 --- a/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -254,7 +254,7 @@ - clocks = <&gateclk 23>; - clock-names = "cesa0"; - marvell,crypto-srams = <&crypto_sram>; -- marvell,crypto-sram-size = <0x7e0>; -+ marvell,crypto-sram-size = <0x800>; - }; - }; - -@@ -275,12 +275,17 @@ - * cpuidle workaround. - */ - idle-sram@0 { -+ status = "disabled"; - reg = <0x0 0x20>; - }; - }; - }; - }; - -+&coherencyfab { -+ broken-idle; -+}; -+ - /* - * Default UART pinctrl setting without RTS/CTS, can be overwritten on - * board level if a different configuration is used. diff --git a/target/linux/mvebu/patches-6.1/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch b/target/linux/mvebu/patches-6.1/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch deleted file mode 100644 index 280fc5957e..0000000000 --- a/target/linux/mvebu/patches-6.1/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch +++ /dev/null @@ -1,134 +0,0 @@ ---- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts -+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts -@@ -31,6 +31,7 @@ - - chosen { - stdout-path = "serial0:115200n8"; -+ append-rootblock = "nullparameter="; /* override the bootloader args */ - }; - - memory@0 { -@@ -94,6 +95,8 @@ - status = "okay"; - phy = <&phy1>; - phy-mode = "sgmii"; -+ nvmem-cells = <&macaddr_vendor_0>; -+ nvmem-cell-names = "mac-address"; - }; - - sata@a0000 { -@@ -175,6 +178,24 @@ - gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>; - }; - }; -+ -+ virtual_flash { -+ compatible = "mtd-concat"; -+ -+ devices = <&mtd_kernel &mtd_gap &mtd_gap2>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ compatible = "openwrt,uimage", "denx,uimage"; -+ label = "firmware"; -+ reg = <0x0 0x0>; -+ }; -+ }; -+ }; - }; - - &mdio { -@@ -265,48 +286,52 @@ - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <20000000>; - -- /* -- * Warning! -- * -- * Synology u-boot uses its compiled-in environment -- * and it seems Synology did not care to change u-boot -- * default configuration in order to allow saving a -- * modified environment at a sensible location. So, -- * if you do a 'saveenv' under u-boot, your modified -- * environment will be saved at 1MB after the start -- * of the flash, i.e. in the middle of the uImage. -- * For that reason, it is strongly advised not to -- * change the default environment, unless you know -- * what you are doing. -- */ -- partition@0 { /* u-boot */ -- label = "RedBoot"; -- reg = <0x00000000 0x000c0000>; /* 768KB */ -- }; -+ partitions { -+ compatible = "fixed-partitions"; - -- partition@c0000 { /* uImage */ -- label = "zImage"; -- reg = <0x000c0000 0x002d0000>; /* 2880KB */ -- }; -+ partition@0 { /* u-boot */ -+ label = "u-boot"; -+ reg = <0x00000000 0x000c0000>; /* 768KB */ -+ read-only; -+ }; - -- partition@390000 { /* uInitramfs */ -- label = "rd.gz"; -- reg = <0x00390000 0x00440000>; /* 4250KB */ -- }; -+ mtd_gap: partition@c0000 { /* gap */ -+ label = "gap"; -+ reg = <0x000c0000 0x00040000>; /* 256KB */ -+ }; - -- partition@7d0000 { /* MAC address and serial number */ -- label = "vendor"; -- reg = <0x007d0000 0x00010000>; /* 64KB */ -- }; -+ partition@100000 { /* u-boot-env */ -+ label = "u-boot-env"; -+ reg = <0x00100000 0x00010000>; /* 64KB */ -+ }; - -- partition@7e0000 { -- label = "RedBoot config"; -- reg = <0x007e0000 0x00010000>; /* 64KB */ -- }; -+ mtd_kernel: partition@110000 { -+ label = "kernel"; -+ reg = <0x00110000 0x006c0000>; /* 6912KB */ -+ }; - -- partition@7f0000 { -- label = "FIS directory"; -- reg = <0x007f0000 0x00010000>; /* 64KB */ -+ partition@7d0000 { /* MAC address and serial number */ -+ reg = <0x007d0000 0x00010000>; /* 64KB */ -+ label = "vendor"; -+ read-only; -+ -+ compatible = "nvmem-cells"; -+ -+ nvmem-layout { -+ compatible = "fixed-layout"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ macaddr_vendor_0: macaddr@0 { -+ reg = <0x0 0x6>; -+ }; -+ }; -+ }; -+ -+ mtd_gap2: partition@7e0000 { -+ label = "gap2"; -+ reg = <0x007e0000 0x00020000>; /* 128KB */ -+ }; - }; - }; - }; diff --git a/target/linux/mvebu/patches-6.1/400-find_active_root.patch b/target/linux/mvebu/patches-6.1/400-find_active_root.patch deleted file mode 100644 index 90164adcd4..0000000000 --- a/target/linux/mvebu/patches-6.1/400-find_active_root.patch +++ /dev/null @@ -1,60 +0,0 @@ -The WRT1900AC among other Linksys routers uses a dual-firmware layout. -Dynamically rename the active partition to "ubi". - -Signed-off-by: Imre Kaloz <kaloz@openwrt.org> - ---- a/drivers/mtd/parsers/ofpart_core.c -+++ b/drivers/mtd/parsers/ofpart_core.c -@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d - return of_get_property(pp, "compatible", NULL); - } - -+static int mangled_rootblock; -+ - static int parse_fixed_partitions(struct mtd_info *master, - const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -48,6 +50,7 @@ static int parse_fixed_partitions(struct - struct device_node *mtd_node; - struct device_node *ofpart_node; - const char *partname; -+ const char *owrtpart = "ubi"; - struct device_node *pp; - int nr_parts, i, ret = 0; - bool dedicated = true; -@@ -152,9 +155,13 @@ static int parse_fixed_partitions(struct - parts[i].size = of_read_number(reg + a_cells, s_cells); - parts[i].of_node = pp; - -- partname = of_get_property(pp, "label", &len); -- if (!partname) -- partname = of_get_property(pp, "name", &len); -+ if (mangled_rootblock && (i == mangled_rootblock)) { -+ partname = owrtpart; -+ } else { -+ partname = of_get_property(pp, "label", &len); -+ if (!partname) -+ partname = of_get_property(pp, "name", &len); -+ } - parts[i].name = partname; - - if (of_get_property(pp, "read-only", &len)) -@@ -271,6 +278,18 @@ static int __init ofpart_parser_init(voi - return 0; - } - -+static int __init active_root(char *str) -+{ -+ get_option(&str, &mangled_rootblock); -+ -+ if (!mangled_rootblock) -+ return 1; -+ -+ return 1; -+} -+ -+__setup("mangled_rootblock=", active_root); -+ - static void __exit ofpart_parser_exit(void) - { - deregister_mtd_parser(&ofpart_parser); diff --git a/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch deleted file mode 100644 index 14f93592fe..0000000000 --- a/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Subject: mvneta: tx queue workaround - -The hardware queue scheduling is apparently configured with fixed -priorities, which creates a nasty fairness issue where traffic from one -CPU can starve traffic from all other CPUs. - -Work around this issue by forcing all tx packets to go through one CPU, -until this issue is fixed properly. - -Ref: https://github.com/openwrt/openwrt/issues/5411 - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -5233,6 +5233,16 @@ static int mvneta_setup_tc(struct net_de - } - } - -+#ifndef CONFIG_ARM64 -+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb, -+ struct net_device *sb_dev) -+{ -+ /* XXX: hardware queue scheduling is broken, -+ * use only one queue until it is fixed */ -+ return 0; -+} -+#endif -+ - static const struct net_device_ops mvneta_netdev_ops = { - .ndo_open = mvneta_open, - .ndo_stop = mvneta_stop, -@@ -5243,6 +5253,9 @@ static const struct net_device_ops mvnet - .ndo_fix_features = mvneta_fix_features, - .ndo_get_stats64 = mvneta_get_stats64, - .ndo_eth_ioctl = mvneta_ioctl, -+#ifndef CONFIG_ARM64 -+ .ndo_select_queue = mvneta_select_queue, -+#endif - .ndo_bpf = mvneta_xdp, - .ndo_xdp_xmit = mvneta_xdp_xmit, - .ndo_setup_tc = mvneta_setup_tc, diff --git a/target/linux/mvebu/patches-6.1/701-mvpp2-read-mac-address-from-nvmem.patch b/target/linux/mvebu/patches-6.1/701-mvpp2-read-mac-address-from-nvmem.patch deleted file mode 100644 index 1c4194776a..0000000000 --- a/target/linux/mvebu/patches-6.1/701-mvpp2-read-mac-address-from-nvmem.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Tobias Schramm <tobias@t-sys.eu> -Subject: mvpp2: support fetching mac address from nvmem - -The mvpp2 driver did not query nvmem for hardware mac addresses. This -patch adds querying of mac addresses stored in nvmem cells as a further -fallback option before assigning a random address. -Purposely added separately to fwnode_get_mac_address() above to maintain -existing behaviour with builtin adapter mac address still taking -precedence. - -Signed-off-by: Tobias Schramm <tobias@t-sys.eu> ---- ---- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c -+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c -@@ -6134,6 +6134,12 @@ static void mvpp2_port_copy_mac_addr(str - } - } - -+ if (!of_get_mac_address(to_of_node(fwnode), hw_mac_addr)) { -+ *mac_from = "nvmem cell"; -+ eth_hw_addr_set(dev, hw_mac_addr); -+ return; -+ } -+ - *mac_from = "random"; - eth_hw_addr_random(dev); - } diff --git a/target/linux/mvebu/patches-6.1/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch b/target/linux/mvebu/patches-6.1/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch deleted file mode 100644 index 29f36be460..0000000000 --- a/target/linux/mvebu/patches-6.1/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch +++ /dev/null @@ -1,40 +0,0 @@ -From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@arm.linux.org.uk> -Date: Sat, 3 Oct 2015 09:13:05 +0100 -Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states - -The cpuidle ->enter method expects the return value to be the sleep -state we entered. Returning negative numbers or other codes is not -permissible since coupled CPU idle was merged. - -At least some of the mvebu_v7_cpu_suspend() implementations return the -value from cpu_suspend(), which returns zero if the CPU vectors back -into the kernel via cpu_resume() (the success case), or the non-zero -return value of the suspend actor, or one (failure cases). - -We do not want to be returning the failure case value back to CPU idle -as that indicates that we successfully entered one of the deeper idle -states. Always return zero instead, indicating that we slept for the -shortest amount of time. - -Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> ---- - drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - ---- a/drivers/cpuidle/cpuidle-mvebu-v7.c -+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c -@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp - ret = mvebu_v7_cpu_suspend(deepidle); - cpu_pm_exit(); - -+ /* -+ * If we failed to enter the desired state, indicate that we -+ * slept lightly. -+ */ - if (ret) -- return ret; -+ return 0; - - return index; - } diff --git a/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch deleted file mode 100644 index d2995b375c..0000000000 --- a/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Sat, 9 Jul 2016 10:58:16 +0100 -Subject: pci: mvebu: time out reset on link up - -If the port reports that the link is up while we are resetting, there's -little point in waiting for the full duration. - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------ - 1 file changed, 14 insertions(+), 6 deletions(-) - ---- a/drivers/pci/controller/pci-mvebu.c -+++ b/drivers/pci/controller/pci-mvebu.c -@@ -1414,6 +1414,7 @@ static int mvebu_pcie_powerup(struct mve - - if (port->reset_gpio) { - u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; -+ unsigned int i; - - of_property_read_u32(port->dn, "reset-delay-us", - &reset_udelay); -@@ -1421,7 +1422,13 @@ static int mvebu_pcie_powerup(struct mve - udelay(100); - - gpiod_set_value_cansleep(port->reset_gpio, 0); -- msleep(reset_udelay / 1000); -+ for (i = 0; i < reset_udelay; i += 1000) { -+ if (mvebu_pcie_link_up(port)) -+ break; -+ msleep(1); -+ } -+ -+ printk("%s: reset completed in %dus\n", port->name, i); - } - - return 0; -@@ -1538,15 +1545,16 @@ static int mvebu_pcie_probe(struct platf - if (!child) - continue; - -- ret = mvebu_pcie_powerup(port); -- if (ret < 0) -- continue; -- - port->base = mvebu_pcie_map_registers(pdev, child, port); - if (IS_ERR(port->base)) { - dev_err(dev, "%s: cannot map registers\n", port->name); - port->base = NULL; -- mvebu_pcie_powerdown(port); -+ continue; -+ } -+ -+ ret = mvebu_pcie_powerup(port); -+ if (ret < 0) { -+ port->base = NULL; - continue; - } - diff --git a/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch b/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch deleted file mode 100644 index fc5c804582..0000000000 --- a/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch +++ /dev/null @@ -1,218 +0,0 @@ -From aa4a0ccc41997f2da172165c92803abace43bd1c Mon Sep 17 00:00:00 2001 -From: Luka Kovacic <luka.kovacic () sartura ! hr> -Date: Tue, 24 Aug 2021 12:44:32 +0000 -Subject: [PATCH 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 - PUZZLE driver bindings - -Add the IEI WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED -drivers. A new vendor prefix is also added accordingly for -IEI Integration Corp. - -Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> -Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr> -Cc: Luka Perkov <luka.perkov@sartura.hr> -Cc: Robert Marko <robert.marko@sartura.hr> ---- - .../hwmon/iei,wt61p803-puzzle-hwmon.yaml | 53 ++++++++++++ - .../leds/iei,wt61p803-puzzle-leds.yaml | 39 +++++++++ - .../bindings/mfd/iei,wt61p803-puzzle.yaml | 82 +++++++++++++++++++ - .../devicetree/bindings/vendor-prefixes.yaml | 2 + - 4 files changed, 176 insertions(+) - create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml - create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml - create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml -@@ -0,0 +1,53 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: IEI WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp. -+ -+maintainers: -+ - Luka Kovacic <luka.kovacic@sartura.hr> -+ -+description: | -+ This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details -+ see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml. -+ -+ The HWMON module is a sub-node of the MCU node in the Device Tree. -+ -+properties: -+ compatible: -+ const: iei,wt61p803-puzzle-hwmon -+ -+ "#address-cells": -+ const: 1 -+ -+ "#size-cells": -+ const: 0 -+ -+patternProperties: -+ "^fan-group@[0-1]$": -+ type: object -+ properties: -+ reg: -+ minimum: 0 -+ maximum: 1 -+ description: -+ Fan group ID -+ -+ cooling-levels: -+ minItems: 1 -+ maxItems: 255 -+ description: -+ Cooling levels for the fans (PWM value mapping) -+ description: | -+ Properties for each fan group. -+ required: -+ - reg -+ -+required: -+ - compatible -+ - "#address-cells" -+ - "#size-cells" -+ -+additionalProperties: false ---- /dev/null -+++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml -@@ -0,0 +1,39 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: IEI WT61P803 PUZZLE MCU LED module from IEI Integration Corp. -+ -+maintainers: -+ - Luka Kovacic <luka.kovacic@sartura.hr> -+ -+description: | -+ This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details -+ see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml. -+ -+ The LED module is a sub-node of the MCU node in the Device Tree. -+ -+properties: -+ compatible: -+ const: iei,wt61p803-puzzle-leds -+ -+ "#address-cells": -+ const: 1 -+ -+ "#size-cells": -+ const: 0 -+ -+ led@0: -+ type: object -+ $ref: common.yaml -+ description: | -+ Properties for a single LED. -+ -+required: -+ - compatible -+ - "#address-cells" -+ - "#size-cells" -+ -+additionalProperties: false ---- /dev/null -+++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml -@@ -0,0 +1,82 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: IEI WT61P803 PUZZLE MCU from IEI Integration Corp. -+ -+maintainers: -+ - Luka Kovacic <luka.kovacic@sartura.hr> -+ -+description: | -+ IEI WT61P803 PUZZLE MCU is embedded in some IEI Puzzle series boards. -+ It's used for controlling system power states, fans, LEDs and temperature -+ sensors. -+ -+ For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the -+ binding documents under the respective subsystem directories. -+ -+properties: -+ compatible: -+ const: iei,wt61p803-puzzle -+ -+ current-speed: -+ description: -+ Serial bus speed in bps -+ maxItems: 1 -+ -+ enable-beep: true -+ -+ hwmon: -+ $ref: /schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml -+ -+ leds: -+ $ref: /schemas/leds/iei,wt61p803-puzzle-leds.yaml -+ -+required: -+ - compatible -+ - current-speed -+ -+additionalProperties: false -+ -+examples: -+ - | -+ #include <dt-bindings/leds/common.h> -+ serial { -+ mcu { -+ compatible = "iei,wt61p803-puzzle"; -+ current-speed = <115200>; -+ enable-beep; -+ -+ leds { -+ compatible = "iei,wt61p803-puzzle-leds"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ led@0 { -+ reg = <0>; -+ function = LED_FUNCTION_POWER; -+ color = <LED_COLOR_ID_BLUE>; -+ }; -+ }; -+ -+ hwmon { -+ compatible = "iei,wt61p803-puzzle-hwmon"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ fan-group@0 { -+ #cooling-cells = <2>; -+ reg = <0x00>; -+ cooling-levels = <64 102 170 230 250>; -+ }; -+ -+ fan-group@1 { -+ #cooling-cells = <2>; -+ reg = <0x01>; -+ cooling-levels = <64 102 170 230 250>; -+ }; -+ }; -+ }; -+ }; ---- a/Documentation/devicetree/bindings/vendor-prefixes.yaml -+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml -@@ -579,6 +579,8 @@ patternProperties: - description: IC Plus Corp. - "^idt,.*": - description: Integrated Device Technologies, Inc. -+ "^iei,.*": -+ description: IEI Integration Corp. - "^ifi,.*": - description: Ingenieurburo Fur Ic-Technologie (I/F/I) - "^ilitek,.*": diff --git a/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch b/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch deleted file mode 100644 index 47d9e3a263..0000000000 --- a/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch +++ /dev/null @@ -1,1034 +0,0 @@ -From 692cfa85272dd12995b427c0a7a585ced5d54f32 Mon Sep 17 00:00:00 2001 -From: Luka Kovacic <luka.kovacic () sartura ! hr> -Date: Tue, 24 Aug 2021 12:44:33 +0000 -Subject: [PATCH 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU - -Add a driver for the IEI WT61P803 PUZZLE microcontroller, used in some -IEI Puzzle series devices. The microcontroller controls system power, -temperature sensors, fans and LEDs. - -This driver implements the core functionality for device communication -over the system serial (serdev bus). It handles MCU messages and the -internal MCU properties. Some properties can be managed over sysfs. - -Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> -Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr> -Cc: Luka Perkov <luka.perkov@sartura.hr> -Cc: Robert Marko <robert.marko@sartura.hr> ---- - drivers/mfd/Kconfig | 9 + - drivers/mfd/Makefile | 1 + - drivers/mfd/iei-wt61p803-puzzle.c | 908 ++++++++++++++++++++++++ - include/linux/mfd/iei-wt61p803-puzzle.h | 66 ++ - 4 files changed, 984 insertions(+) - create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c - create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h - ---- a/drivers/mfd/Kconfig -+++ b/drivers/mfd/Kconfig -@@ -2222,6 +2222,15 @@ config SGI_MFD_IOC3 - If you have an SGI Origin, Octane, or a PCI IOC3 card, - then say Y. Otherwise say N. - -+config MFD_IEI_WT61P803_PUZZLE -+ tristate "IEI WT61P803 PUZZLE MCU driver" -+ depends on SERIAL_DEV_BUS -+ select MFD_CORE -+ help -+ IEI WT61P803 PUZZLE is a system power management microcontroller -+ used for fan control, temperature sensor reading, LED control -+ and system identification. -+ - config MFD_INTEL_M10_BMC - tristate "Intel MAX 10 Board Management Controller" - depends on SPI_MASTER ---- a/drivers/mfd/Makefile -+++ b/drivers/mfd/Makefile -@@ -244,6 +244,7 @@ obj-$(CONFIG_MFD_RT4831) += rt4831.o - obj-$(CONFIG_MFD_RT5033) += rt5033.o - obj-$(CONFIG_MFD_RT5120) += rt5120.o - obj-$(CONFIG_MFD_SKY81452) += sky81452.o -+obj-$(CONFIG_MFD_IEI_WT61P803_PUZZLE) += iei-wt61p803-puzzle.o - - obj-$(CONFIG_INTEL_SOC_PMIC) += intel_soc_pmic_crc.o - obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o ---- /dev/null -+++ b/drivers/mfd/iei-wt61p803-puzzle.c -@@ -0,0 +1,908 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+/* IEI WT61P803 PUZZLE MCU Driver -+ * System management microcontroller for fan control, temperature sensor reading, -+ * LED control and system identification on IEI Puzzle series ARM-based appliances. -+ * -+ * Copyright (C) 2020 Sartura Ltd. -+ * Author: Luka Kovacic <luka.kovacic@sartura.hr> -+ */ -+ -+#include <linux/atomic.h> -+#include <linux/delay.h> -+#include <linux/export.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/mfd/core.h> -+#include <linux/mfd/iei-wt61p803-puzzle.h> -+#include <linux/mod_devicetable.h> -+#include <linux/module.h> -+#include <linux/of_platform.h> -+#include <linux/property.h> -+#include <linux/sched.h> -+#include <linux/serdev.h> -+#include <linux/slab.h> -+#include <linux/sysfs.h> -+#include <asm/unaligned.h> -+ -+/* start, payload and XOR checksum at end */ -+#define IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH (1 + 20 + 1) -+#define IEI_WT61P803_PUZZLE_RESP_BUF_SIZE 512 -+ -+#define IEI_WT61P803_PUZZLE_MAC_LENGTH 17 -+#define IEI_WT61P803_PUZZLE_SN_LENGTH 36 -+#define IEI_WT61P803_PUZZLE_VERSION_LENGTH 6 -+#define IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH 16 -+#define IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH 8 -+#define IEI_WT61P803_PUZZLE_NB_MAC 8 -+ -+/* Use HZ as a timeout value throughout the driver */ -+#define IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT HZ -+ -+enum iei_wt61p803_puzzle_attribute_type { -+ IEI_WT61P803_PUZZLE_VERSION, -+ IEI_WT61P803_PUZZLE_BUILD_INFO, -+ IEI_WT61P803_PUZZLE_BOOTLOADER_MODE, -+ IEI_WT61P803_PUZZLE_PROTOCOL_VERSION, -+ IEI_WT61P803_PUZZLE_SERIAL_NUMBER, -+ IEI_WT61P803_PUZZLE_MAC_ADDRESS, -+ IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS, -+ IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY, -+ IEI_WT61P803_PUZZLE_POWER_STATUS, -+}; -+ -+struct iei_wt61p803_puzzle_device_attribute { -+ struct device_attribute dev_attr; -+ enum iei_wt61p803_puzzle_attribute_type type; -+ u8 index; -+}; -+ -+/** -+ * struct iei_wt61p803_puzzle_mcu_status - MCU flags state -+ * @ac_recovery_status_flag: AC Recovery Status Flag -+ * @power_loss_recovery: System recovery after power loss -+ * @power_status: System Power-on Method -+ */ -+struct iei_wt61p803_puzzle_mcu_status { -+ u8 ac_recovery_status_flag; -+ u8 power_loss_recovery; -+ u8 power_status; -+}; -+ -+/** -+ * struct iei_wt61p803_puzzle_reply - MCU reply -+ * @size: Size of the MCU reply -+ * @data: Full MCU reply buffer -+ * @state: Current state of the packet -+ * @received: Was the response fullfilled -+ */ -+struct iei_wt61p803_puzzle_reply { -+ size_t size; -+ unsigned char data[IEI_WT61P803_PUZZLE_RESP_BUF_SIZE]; -+ struct completion received; -+}; -+ -+/** -+ * struct iei_wt61p803_puzzle_mcu_version - MCU version status -+ * @version: Primary firmware version -+ * @build_info: Build date and time -+ * @bootloader_mode: Status of the MCU operation -+ * @protocol_version: MCU communication protocol version -+ * @serial_number: Device factory serial number -+ * @mac_address: Device factory MAC addresses -+ * -+ * Last element of arrays is reserved for '\0'. -+ */ -+struct iei_wt61p803_puzzle_mcu_version { -+ char version[IEI_WT61P803_PUZZLE_VERSION_LENGTH + 1]; -+ char build_info[IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH + 1]; -+ bool bootloader_mode; -+ char protocol_version[IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH + 1]; -+ char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH + 1]; -+ char mac_address[IEI_WT61P803_PUZZLE_NB_MAC][IEI_WT61P803_PUZZLE_MAC_LENGTH + 1]; -+}; -+ -+/** -+ * struct iei_wt61p803_puzzle - IEI WT61P803 PUZZLE MCU Driver -+ * @serdev: Pointer to underlying serdev device -+ * @dev: Pointer to underlying dev device -+ * @reply_lock: Reply mutex lock -+ * @reply: Pointer to the iei_wt61p803_puzzle_reply struct -+ * @version: MCU version related data -+ * @status: MCU status related data -+ * @response_buffer Command response buffer allocation -+ * @lock General member mutex lock -+ */ -+struct iei_wt61p803_puzzle { -+ struct serdev_device *serdev; -+ struct device *dev; -+ struct mutex reply_lock; /* lock to prevent multiple firmware calls */ -+ struct iei_wt61p803_puzzle_reply *reply; -+ struct iei_wt61p803_puzzle_mcu_version version; -+ struct iei_wt61p803_puzzle_mcu_status status; -+ unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE]; -+ struct mutex lock; /* lock to protect response buffer */ -+}; -+ -+static unsigned char iei_wt61p803_puzzle_checksum(unsigned char *buf, size_t len) -+{ -+ unsigned char checksum = 0; -+ size_t i; -+ -+ for (i = 0; i < len; i++) -+ checksum ^= buf[i]; -+ return checksum; -+} -+ -+static int iei_wt61p803_puzzle_process_resp(struct iei_wt61p803_puzzle *mcu, -+ const unsigned char *raw_resp_data, size_t size) -+{ -+ unsigned char checksum; -+ -+ /* Check the incoming frame header */ -+ if (!(raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START || -+ raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER || -+ (raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM && -+ raw_resp_data[1] == IEI_WT61P803_PUZZLE_CMD_EEPROM_READ))) { -+ if (mcu->reply->size + size >= sizeof(mcu->reply->data)) -+ return -EIO; -+ -+ /* Append the frame to existing data */ -+ memcpy(mcu->reply->data + mcu->reply->size, raw_resp_data, size); -+ mcu->reply->size += size; -+ } else { -+ if (size >= sizeof(mcu->reply->data)) -+ return -EIO; -+ -+ /* Start processing a new frame */ -+ memcpy(mcu->reply->data, raw_resp_data, size); -+ mcu->reply->size = size; -+ } -+ -+ checksum = iei_wt61p803_puzzle_checksum(mcu->reply->data, mcu->reply->size - 1); -+ if (checksum != mcu->reply->data[mcu->reply->size - 1]) { -+ /* The checksum isn't matched yet, wait for new frames */ -+ return size; -+ } -+ -+ /* Received all the data */ -+ complete(&mcu->reply->received); -+ -+ return size; -+} -+ -+static int iei_wt61p803_puzzle_recv_buf(struct serdev_device *serdev, -+ const unsigned char *data, size_t size) -+{ -+ struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev); -+ int ret; -+ -+ ret = iei_wt61p803_puzzle_process_resp(mcu, data, size); -+ /* Return the number of processed bytes if function returns error, -+ * discard the remaining incoming data, since the frame this data -+ * belongs to is broken anyway -+ */ -+ if (ret < 0) -+ return size; -+ -+ return ret; -+} -+ -+static const struct serdev_device_ops iei_wt61p803_puzzle_serdev_device_ops = { -+ .receive_buf = iei_wt61p803_puzzle_recv_buf, -+ .write_wakeup = serdev_device_write_wakeup, -+}; -+ -+/** -+ * iei_wt61p803_puzzle_write_command_watchdog() - Watchdog of the normal cmd -+ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct -+ * @cmd: Pointer to the char array to send (size should be content + 1 (xor)) -+ * @size: Size of the cmd char array -+ * @reply_data: Pointer to the reply/response data array (should be allocated) -+ * @reply_size: Pointer to size_t (size of reply_data) -+ * @retry_count: Number of times to retry sending the command to the MCU -+ */ -+int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu, -+ unsigned char *cmd, size_t size, -+ unsigned char *reply_data, -+ size_t *reply_size, int retry_count) -+{ -+ struct device *dev = &mcu->serdev->dev; -+ int ret, i; -+ -+ for (i = 0; i < retry_count; i++) { -+ ret = iei_wt61p803_puzzle_write_command(mcu, cmd, size, -+ reply_data, reply_size); -+ if (ret != -ETIMEDOUT) -+ return ret; -+ } -+ -+ dev_err(dev, "Command response timed out. Retries: %d\n", retry_count); -+ -+ return -ETIMEDOUT; -+} -+EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command_watchdog); -+ -+/** -+ * iei_wt61p803_puzzle_write_command() - Send a structured command to the MCU -+ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct -+ * @cmd: Pointer to the char array to send (size should be content + 1 (xor)) -+ * @size: Size of the cmd char array -+ * @reply_data: Pointer to the reply/response data array (should be allocated) -+ * -+ * Sends a structured command to the MCU. -+ */ -+int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu, -+ unsigned char *cmd, size_t size, -+ unsigned char *reply_data, -+ size_t *reply_size) -+{ -+ struct device *dev = &mcu->serdev->dev; -+ int ret; -+ -+ if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH) -+ return -EINVAL; -+ -+ mutex_lock(&mcu->reply_lock); -+ -+ cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1); -+ -+ /* Initialize reply struct */ -+ reinit_completion(&mcu->reply->received); -+ mcu->reply->size = 0; -+ usleep_range(2000, 10000); -+ serdev_device_write_flush(mcu->serdev); -+ ret = serdev_device_write_buf(mcu->serdev, cmd, size); -+ if (ret < 0) -+ goto exit; -+ -+ serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT); -+ ret = wait_for_completion_timeout(&mcu->reply->received, -+ IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT); -+ if (ret == 0) { -+ dev_err(dev, "Command reply receive timeout\n"); -+ ret = -ETIMEDOUT; -+ goto exit; -+ } -+ -+ *reply_size = mcu->reply->size; -+ /* Copy the received data, as it will not be available after a new frame is received */ -+ memcpy(reply_data, mcu->reply->data, mcu->reply->size); -+ ret = 0; -+exit: -+ mutex_unlock(&mcu->reply_lock); -+ return ret; -+} -+EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command); -+ -+static int iei_wt61p803_puzzle_buzzer(struct iei_wt61p803_puzzle *mcu, bool long_beep) -+{ -+ unsigned char *resp_buf = mcu->response_buffer; -+ unsigned char buzzer_cmd[4] = {}; -+ size_t reply_size; -+ int ret; -+ -+ buzzer_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START; -+ buzzer_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE; -+ buzzer_cmd[2] = long_beep ? '3' : '2'; /* Buzzer 1.5 / 0.5 second beep */ -+ -+ mutex_lock(&mcu->lock); -+ ret = iei_wt61p803_puzzle_write_command(mcu, buzzer_cmd, sizeof(buzzer_cmd), -+ resp_buf, &reply_size); -+ if (ret) -+ goto exit; -+ -+ if (reply_size != 3) { -+ ret = -EIO; -+ goto exit; -+ } -+ -+ if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START && -+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK && -+ resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) { -+ ret = -EPROTO; -+ goto exit; -+ } -+exit: -+ mutex_unlock(&mcu->lock); -+ return ret; -+} -+ -+static int iei_wt61p803_puzzle_get_version(struct iei_wt61p803_puzzle *mcu) -+{ -+ unsigned char version_cmd[3] = { -+ IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER, -+ IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION, -+ }; -+ unsigned char build_info_cmd[3] = { -+ IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER, -+ IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD, -+ }; -+ unsigned char bootloader_mode_cmd[3] = { -+ IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER, -+ IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE, -+ }; -+ unsigned char protocol_version_cmd[3] = { -+ IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER, -+ IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION, -+ }; -+ unsigned char *rb = mcu->response_buffer; -+ size_t reply_size; -+ int ret; -+ -+ mutex_lock(&mcu->lock); -+ -+ ret = iei_wt61p803_puzzle_write_command(mcu, version_cmd, sizeof(version_cmd), -+ rb, &reply_size); -+ if (ret) -+ goto err; -+ if (reply_size < 7) { -+ ret = -EIO; -+ goto err; -+ } -+ sprintf(mcu->version.version, "v%c.%.3s", rb[2], &rb[3]); -+ -+ ret = iei_wt61p803_puzzle_write_command(mcu, build_info_cmd, -+ sizeof(build_info_cmd), rb, -+ &reply_size); -+ if (ret) -+ goto err; -+ if (reply_size < 15) { -+ ret = -EIO; -+ goto err; -+ } -+ sprintf(mcu->version.build_info, "%c%c/%c%c/%.4s %c%c:%c%c", -+ rb[8], rb[9], rb[6], rb[7], &rb[2], rb[10], rb[11], -+ rb[12], rb[13]); -+ -+ ret = iei_wt61p803_puzzle_write_command(mcu, bootloader_mode_cmd, -+ sizeof(bootloader_mode_cmd), rb, -+ &reply_size); -+ if (ret) -+ goto err; -+ if (reply_size < 4) { -+ ret = -EIO; -+ goto err; -+ } -+ if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS) -+ mcu->version.bootloader_mode = false; -+ else if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER) -+ mcu->version.bootloader_mode = true; -+ -+ ret = iei_wt61p803_puzzle_write_command(mcu, protocol_version_cmd, -+ sizeof(protocol_version_cmd), rb, -+ &reply_size); -+ if (ret) -+ goto err; -+ if (reply_size < 9) { -+ ret = -EIO; -+ goto err; -+ } -+ sprintf(mcu->version.protocol_version, "v%c.%c%c%c%c%c", -+ rb[7], rb[6], rb[5], rb[4], rb[3], rb[2]); -+err: -+ mutex_unlock(&mcu->lock); -+ return ret; -+} -+ -+static int iei_wt61p803_puzzle_get_mcu_status(struct iei_wt61p803_puzzle *mcu) -+{ -+ unsigned char mcu_status_cmd[5] = { -+ IEI_WT61P803_PUZZLE_CMD_HEADER_START, -+ IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER, -+ IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS, -+ IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS, -+ }; -+ unsigned char *resp_buf = mcu->response_buffer; -+ size_t reply_size; -+ int ret; -+ -+ mutex_lock(&mcu->lock); -+ ret = iei_wt61p803_puzzle_write_command(mcu, mcu_status_cmd, sizeof(mcu_status_cmd), -+ resp_buf, &reply_size); -+ if (ret) -+ goto exit; -+ if (reply_size < 20) { -+ ret = -EIO; -+ goto exit; -+ } -+ -+ /* Response format: -+ * (IDX RESPONSE) -+ * 0 @ -+ * 1 O -+ * 2 S -+ * 3 S -+ * ... -+ * 5 AC Recovery Status Flag -+ * ... -+ * 10 Power Loss Recovery -+ * ... -+ * 19 Power Status (system power on method) -+ * 20 XOR checksum -+ */ -+ if (resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START && -+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER && -+ resp_buf[2] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS && -+ resp_buf[3] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS) { -+ mcu->status.ac_recovery_status_flag = resp_buf[5]; -+ mcu->status.power_loss_recovery = resp_buf[10]; -+ mcu->status.power_status = resp_buf[19]; -+ } -+exit: -+ mutex_unlock(&mcu->lock); -+ return ret; -+} -+ -+static int iei_wt61p803_puzzle_get_serial_number(struct iei_wt61p803_puzzle *mcu) -+{ -+ unsigned char *resp_buf = mcu->response_buffer; -+ unsigned char serial_number_cmd[5] = { -+ IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM, -+ IEI_WT61P803_PUZZLE_CMD_EEPROM_READ, -+ 0x00, /* EEPROM read address */ -+ 0x24, /* Data length */ -+ }; -+ size_t reply_size; -+ int ret; -+ -+ mutex_lock(&mcu->lock); -+ ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd, -+ sizeof(serial_number_cmd), -+ resp_buf, &reply_size); -+ if (ret) -+ goto err; -+ -+ if (reply_size < IEI_WT61P803_PUZZLE_SN_LENGTH + 4) { -+ ret = -EIO; -+ goto err; -+ } -+ -+ sprintf(mcu->version.serial_number, "%.*s", -+ IEI_WT61P803_PUZZLE_SN_LENGTH, resp_buf + 4); -+err: -+ mutex_unlock(&mcu->lock); -+ return ret; -+} -+ -+static int iei_wt61p803_puzzle_write_serial_number(struct iei_wt61p803_puzzle *mcu, -+ unsigned char serial_number[36]) -+{ -+ unsigned char *resp_buf = mcu->response_buffer; -+ unsigned char serial_number_header[4] = { -+ IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM, -+ IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE, -+ 0x00, /* EEPROM write address */ -+ 0xC, /* Data length */ -+ }; -+ unsigned char serial_number_cmd[4 + 12 + 1]; /* header, serial number, XOR checksum */ -+ int ret, sn_counter; -+ size_t reply_size; -+ -+ /* The MCU can only handle 22 byte messages, send the S/N in 12 byte chunks */ -+ mutex_lock(&mcu->lock); -+ for (sn_counter = 0; sn_counter < 3; sn_counter++) { -+ serial_number_header[2] = 0x0 + 0xC * sn_counter; -+ -+ memcpy(serial_number_cmd, serial_number_header, sizeof(serial_number_header)); -+ memcpy(serial_number_cmd + sizeof(serial_number_header), -+ serial_number + 0xC * sn_counter, 0xC); -+ -+ ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd, -+ sizeof(serial_number_cmd), -+ resp_buf, &reply_size); -+ if (ret) -+ goto err; -+ if (reply_size != 3) { -+ ret = -EIO; -+ goto err; -+ } -+ if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START && -+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK && -+ resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) { -+ ret = -EPROTO; -+ goto err; -+ } -+ } -+ -+ sprintf(mcu->version.serial_number, "%.*s", -+ IEI_WT61P803_PUZZLE_SN_LENGTH, serial_number); -+err: -+ mutex_unlock(&mcu->lock); -+ return ret; -+} -+ -+static int iei_wt61p803_puzzle_get_mac_address(struct iei_wt61p803_puzzle *mcu, int index) -+{ -+ unsigned char *resp_buf = mcu->response_buffer; -+ unsigned char mac_address_cmd[5] = { -+ IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM, -+ IEI_WT61P803_PUZZLE_CMD_EEPROM_READ, -+ 0x00, /* EEPROM read address */ -+ 0x11, /* Data length */ -+ }; -+ size_t reply_size; -+ int ret; -+ -+ mutex_lock(&mcu->lock); -+ mac_address_cmd[2] = 0x24 + 0x11 * index; -+ -+ ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd, -+ sizeof(mac_address_cmd), -+ resp_buf, &reply_size); -+ if (ret) -+ goto err; -+ -+ if (reply_size < 22) { -+ ret = -EIO; -+ goto err; -+ } -+ -+ sprintf(mcu->version.mac_address[index], "%.*s", -+ IEI_WT61P803_PUZZLE_MAC_LENGTH, resp_buf + 4); -+err: -+ mutex_unlock(&mcu->lock); -+ return ret; -+} -+ -+static int -+iei_wt61p803_puzzle_write_mac_address(struct iei_wt61p803_puzzle *mcu, -+ unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH], -+ int mac_address_idx) -+{ -+ unsigned char mac_address_cmd[4 + IEI_WT61P803_PUZZLE_MAC_LENGTH + 1]; -+ unsigned char *resp_buf = mcu->response_buffer; -+ unsigned char mac_address_header[4] = { -+ IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM, -+ IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE, -+ 0x00, /* EEPROM write address */ -+ 0x11, /* Data length */ -+ }; -+ size_t reply_size; -+ int ret; -+ -+ if (mac_address_idx < 0 || mac_address_idx >= IEI_WT61P803_PUZZLE_NB_MAC) -+ return -EINVAL; -+ -+ mac_address_header[2] = 0x24 + 0x11 * mac_address_idx; -+ -+ /* Concat mac_address_header, mac_address to mac_address_cmd */ -+ memcpy(mac_address_cmd, mac_address_header, sizeof(mac_address_header)); -+ memcpy(mac_address_cmd + sizeof(mac_address_header), mac_address, -+ IEI_WT61P803_PUZZLE_MAC_LENGTH); -+ -+ mutex_lock(&mcu->lock); -+ ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd, -+ sizeof(mac_address_cmd), -+ resp_buf, &reply_size); -+ if (ret) -+ goto err; -+ if (reply_size != 3) { -+ ret = -EIO; -+ goto err; -+ } -+ if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START && -+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK && -+ resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) { -+ ret = -EPROTO; -+ goto err; -+ } -+ -+ sprintf(mcu->version.mac_address[mac_address_idx], "%.*s", -+ IEI_WT61P803_PUZZLE_MAC_LENGTH, mac_address); -+err: -+ mutex_unlock(&mcu->lock); -+ return ret; -+} -+ -+static int iei_wt61p803_puzzle_write_power_loss_recovery(struct iei_wt61p803_puzzle *mcu, -+ int power_loss_recovery_action) -+{ -+ unsigned char *resp_buf = mcu->response_buffer; -+ unsigned char power_loss_recovery_cmd[5] = {}; -+ size_t reply_size; -+ int ret; -+ -+ if (power_loss_recovery_action < 0 || power_loss_recovery_action > 4) -+ return -EINVAL; -+ -+ power_loss_recovery_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START; -+ power_loss_recovery_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER; -+ power_loss_recovery_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS; -+ power_loss_recovery_cmd[3] = hex_asc[power_loss_recovery_action]; -+ -+ mutex_lock(&mcu->lock); -+ ret = iei_wt61p803_puzzle_write_command(mcu, power_loss_recovery_cmd, -+ sizeof(power_loss_recovery_cmd), -+ resp_buf, &reply_size); -+ if (ret) -+ goto exit; -+ mcu->status.power_loss_recovery = power_loss_recovery_action; -+exit: -+ mutex_unlock(&mcu->lock); -+ return ret; -+} -+ -+#define to_puzzle_dev_attr(_attr) \ -+ container_of(_attr, struct iei_wt61p803_puzzle_device_attribute, dev_attr) -+ -+static ssize_t show_output(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev); -+ struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr); -+ int ret; -+ -+ switch (pattr->type) { -+ case IEI_WT61P803_PUZZLE_VERSION: -+ return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.version); -+ case IEI_WT61P803_PUZZLE_BUILD_INFO: -+ return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.build_info); -+ case IEI_WT61P803_PUZZLE_BOOTLOADER_MODE: -+ return scnprintf(buf, PAGE_SIZE, "%d\n", mcu->version.bootloader_mode); -+ case IEI_WT61P803_PUZZLE_PROTOCOL_VERSION: -+ return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.protocol_version); -+ case IEI_WT61P803_PUZZLE_SERIAL_NUMBER: -+ ret = iei_wt61p803_puzzle_get_serial_number(mcu); -+ if (!ret) -+ ret = scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.serial_number); -+ else -+ ret = 0; -+ return ret; -+ case IEI_WT61P803_PUZZLE_MAC_ADDRESS: -+ ret = iei_wt61p803_puzzle_get_mac_address(mcu, pattr->index); -+ if (!ret) -+ ret = scnprintf(buf, PAGE_SIZE, "%s\n", -+ mcu->version.mac_address[pattr->index]); -+ else -+ ret = 0; -+ return ret; -+ case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS: -+ case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY: -+ case IEI_WT61P803_PUZZLE_POWER_STATUS: -+ ret = iei_wt61p803_puzzle_get_mcu_status(mcu); -+ if (ret) -+ return ret; -+ -+ mutex_lock(&mcu->lock); -+ switch (pattr->type) { -+ case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS: -+ ret = scnprintf(buf, PAGE_SIZE, "%x\n", -+ mcu->status.ac_recovery_status_flag); -+ break; -+ case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY: -+ ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_loss_recovery); -+ break; -+ case IEI_WT61P803_PUZZLE_POWER_STATUS: -+ ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_status); -+ break; -+ default: -+ ret = 0; -+ break; -+ } -+ mutex_unlock(&mcu->lock); -+ return ret; -+ default: -+ return 0; -+ } -+ -+ return 0; -+} -+ -+static ssize_t store_output(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t len) -+{ -+ unsigned char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH]; -+ unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH]; -+ struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev); -+ struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr); -+ int power_loss_recovery_action = 0; -+ int ret; -+ -+ switch (pattr->type) { -+ case IEI_WT61P803_PUZZLE_SERIAL_NUMBER: -+ if (len != (size_t)(IEI_WT61P803_PUZZLE_SN_LENGTH + 1)) -+ return -EINVAL; -+ memcpy(serial_number, buf, sizeof(serial_number)); -+ ret = iei_wt61p803_puzzle_write_serial_number(mcu, serial_number); -+ if (ret) -+ return ret; -+ return len; -+ case IEI_WT61P803_PUZZLE_MAC_ADDRESS: -+ if (len != (size_t)(IEI_WT61P803_PUZZLE_MAC_LENGTH + 1)) -+ return -EINVAL; -+ -+ memcpy(mac_address, buf, sizeof(mac_address)); -+ -+ if (strlen(attr->attr.name) != 13) -+ return -EIO; -+ -+ ret = iei_wt61p803_puzzle_write_mac_address(mcu, mac_address, pattr->index); -+ if (ret) -+ return ret; -+ return len; -+ case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY: -+ ret = kstrtoint(buf, 10, &power_loss_recovery_action); -+ if (ret) -+ return ret; -+ ret = iei_wt61p803_puzzle_write_power_loss_recovery(mcu, -+ power_loss_recovery_action); -+ if (ret) -+ return ret; -+ return len; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+#define IEI_WT61P803_PUZZLE_ATTR(_name, _mode, _show, _store, _type, _index) \ -+ struct iei_wt61p803_puzzle_device_attribute dev_attr_##_name = \ -+ { .dev_attr = __ATTR(_name, _mode, _show, _store), \ -+ .type = _type, \ -+ .index = _index } -+ -+#define IEI_WT61P803_PUZZLE_ATTR_RO(_name, _type, _id) \ -+ IEI_WT61P803_PUZZLE_ATTR(_name, 0444, show_output, NULL, _type, _id) -+ -+#define IEI_WT61P803_PUZZLE_ATTR_RW(_name, _type, _id) \ -+ IEI_WT61P803_PUZZLE_ATTR(_name, 0644, show_output, store_output, _type, _id) -+ -+static IEI_WT61P803_PUZZLE_ATTR_RO(version, IEI_WT61P803_PUZZLE_VERSION, 0); -+static IEI_WT61P803_PUZZLE_ATTR_RO(build_info, IEI_WT61P803_PUZZLE_BUILD_INFO, 0); -+static IEI_WT61P803_PUZZLE_ATTR_RO(bootloader_mode, IEI_WT61P803_PUZZLE_BOOTLOADER_MODE, 0); -+static IEI_WT61P803_PUZZLE_ATTR_RO(protocol_version, IEI_WT61P803_PUZZLE_PROTOCOL_VERSION, 0); -+static IEI_WT61P803_PUZZLE_ATTR_RW(serial_number, IEI_WT61P803_PUZZLE_SERIAL_NUMBER, 0); -+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_0, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 0); -+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_1, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 1); -+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_2, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 2); -+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_3, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 3); -+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_4, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 4); -+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_5, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 5); -+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_6, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 6); -+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_7, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 7); -+static IEI_WT61P803_PUZZLE_ATTR_RO(ac_recovery_status, IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS, 0); -+static IEI_WT61P803_PUZZLE_ATTR_RW(power_loss_recovery, IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY, 0); -+static IEI_WT61P803_PUZZLE_ATTR_RO(power_status, IEI_WT61P803_PUZZLE_POWER_STATUS, 0); -+ -+static struct attribute *iei_wt61p803_puzzle_attrs[] = { -+ &dev_attr_version.dev_attr.attr, -+ &dev_attr_build_info.dev_attr.attr, -+ &dev_attr_bootloader_mode.dev_attr.attr, -+ &dev_attr_protocol_version.dev_attr.attr, -+ &dev_attr_serial_number.dev_attr.attr, -+ &dev_attr_mac_address_0.dev_attr.attr, -+ &dev_attr_mac_address_1.dev_attr.attr, -+ &dev_attr_mac_address_2.dev_attr.attr, -+ &dev_attr_mac_address_3.dev_attr.attr, -+ &dev_attr_mac_address_4.dev_attr.attr, -+ &dev_attr_mac_address_5.dev_attr.attr, -+ &dev_attr_mac_address_6.dev_attr.attr, -+ &dev_attr_mac_address_7.dev_attr.attr, -+ &dev_attr_ac_recovery_status.dev_attr.attr, -+ &dev_attr_power_loss_recovery.dev_attr.attr, -+ &dev_attr_power_status.dev_attr.attr, -+ NULL -+}; -+ATTRIBUTE_GROUPS(iei_wt61p803_puzzle); -+ -+static int iei_wt61p803_puzzle_sysfs_create(struct device *dev, -+ struct iei_wt61p803_puzzle *mcu) -+{ -+ int ret; -+ -+ ret = sysfs_create_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups); -+ if (ret) -+ mfd_remove_devices(mcu->dev); -+ -+ return ret; -+} -+ -+static int iei_wt61p803_puzzle_sysfs_remove(struct device *dev, -+ struct iei_wt61p803_puzzle *mcu) -+{ -+ /* Remove sysfs groups */ -+ sysfs_remove_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups); -+ mfd_remove_devices(mcu->dev); -+ -+ return 0; -+} -+ -+static int iei_wt61p803_puzzle_probe(struct serdev_device *serdev) -+{ -+ struct device *dev = &serdev->dev; -+ struct iei_wt61p803_puzzle *mcu; -+ u32 baud; -+ int ret; -+ -+ /* Read the baud rate from 'current-speed', because the MCU supports different rates */ -+ if (device_property_read_u32(dev, "current-speed", &baud)) { -+ dev_err(dev, -+ "'current-speed' is not specified in device node\n"); -+ return -EINVAL; -+ } -+ dev_dbg(dev, "Driver baud rate: %d\n", baud); -+ -+ /* Allocate the memory */ -+ mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL); -+ if (!mcu) -+ return -ENOMEM; -+ -+ mcu->reply = devm_kzalloc(dev, sizeof(*mcu->reply), GFP_KERNEL); -+ if (!mcu->reply) -+ return -ENOMEM; -+ -+ /* Initialize device struct data */ -+ mcu->serdev = serdev; -+ mcu->dev = dev; -+ init_completion(&mcu->reply->received); -+ mutex_init(&mcu->reply_lock); -+ mutex_init(&mcu->lock); -+ -+ /* Setup UART interface */ -+ serdev_device_set_drvdata(serdev, mcu); -+ serdev_device_set_client_ops(serdev, &iei_wt61p803_puzzle_serdev_device_ops); -+ ret = devm_serdev_device_open(dev, serdev); -+ if (ret) -+ return ret; -+ serdev_device_set_baudrate(serdev, baud); -+ serdev_device_set_flow_control(serdev, false); -+ ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); -+ if (ret) { -+ dev_err(dev, "Failed to set parity\n"); -+ return ret; -+ } -+ -+ ret = iei_wt61p803_puzzle_get_version(mcu); -+ if (ret) -+ return ret; -+ -+ dev_dbg(dev, "MCU version: %s\n", mcu->version.version); -+ dev_dbg(dev, "MCU firmware build info: %s\n", mcu->version.build_info); -+ dev_dbg(dev, "MCU in bootloader mode: %s\n", -+ mcu->version.bootloader_mode ? "true" : "false"); -+ dev_dbg(dev, "MCU protocol version: %s\n", mcu->version.protocol_version); -+ -+ if (device_property_read_bool(dev, "enable-beep")) { -+ ret = iei_wt61p803_puzzle_buzzer(mcu, false); -+ if (ret) -+ return ret; -+ } -+ -+ ret = iei_wt61p803_puzzle_sysfs_create(dev, mcu); -+ if (ret) -+ return ret; -+ -+ return devm_of_platform_populate(dev); -+} -+ -+static void iei_wt61p803_puzzle_remove(struct serdev_device *serdev) -+{ -+ struct device *dev = &serdev->dev; -+ struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev); -+ -+ iei_wt61p803_puzzle_sysfs_remove(dev, mcu); -+} -+ -+static const struct of_device_id iei_wt61p803_puzzle_dt_ids[] = { -+ { .compatible = "iei,wt61p803-puzzle" }, -+ { } -+}; -+ -+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_dt_ids); -+ -+static struct serdev_device_driver iei_wt61p803_puzzle_drv = { -+ .probe = iei_wt61p803_puzzle_probe, -+ .remove = iei_wt61p803_puzzle_remove, -+ .driver = { -+ .name = "iei-wt61p803-puzzle", -+ .of_match_table = iei_wt61p803_puzzle_dt_ids, -+ }, -+}; -+ -+module_serdev_device_driver(iei_wt61p803_puzzle_drv); -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>"); -+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU Driver"); ---- /dev/null -+++ b/include/linux/mfd/iei-wt61p803-puzzle.h -@@ -0,0 +1,66 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+/* IEI WT61P803 PUZZLE MCU Driver -+ * System management microcontroller for fan control, temperature sensor reading, -+ * LED control and system identification on IEI Puzzle series ARM-based appliances. -+ * -+ * Copyright (C) 2020 Sartura Ltd. -+ * Author: Luka Kovacic <luka.kovacic@sartura.hr> -+ */ -+ -+#ifndef _MFD_IEI_WT61P803_PUZZLE_H_ -+#define _MFD_IEI_WT61P803_PUZZLE_H_ -+ -+#define IEI_WT61P803_PUZZLE_BUF_SIZE 512 -+ -+/* Command magic numbers */ -+#define IEI_WT61P803_PUZZLE_CMD_HEADER_START 0x40 /* @ */ -+#define IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER 0x25 /* % */ -+#define IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM 0xF7 -+ -+#define IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK 0x30 /* 0 */ -+#define IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK 0x70 -+ -+#define IEI_WT61P803_PUZZLE_CMD_EEPROM_READ 0xA1 -+#define IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE 0xA0 -+ -+#define IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION 0x56 /* V */ -+#define IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD 0x42 /* B */ -+#define IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE 0x4D /* M */ -+#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER 0x30 -+#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS 0x31 -+#define IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION 0x50 /* P */ -+ -+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE 0x43 /* C */ -+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER 0x4F /* O */ -+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS 0x53 /* S */ -+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */ -+ -+#define IEI_WT61P803_PUZZLE_CMD_LED 0x52 /* R */ -+#define IEI_WT61P803_PUZZLE_CMD_LED_POWER 0x31 /* 1 */ -+ -+#define IEI_WT61P803_PUZZLE_CMD_TEMP 0x54 /* T */ -+#define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL 0x41 /* A */ -+ -+#define IEI_WT61P803_PUZZLE_CMD_FAN 0x46 /* F */ -+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ 0x5A /* Z */ -+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE 0x57 /* W */ -+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE 0x30 -+#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE 0x41 /* A */ -+ -+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE + (x)) /* 0 - 1 */ -+#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE + (x)) /* 0 - 5 */ -+ -+struct iei_wt61p803_puzzle_mcu_version; -+struct iei_wt61p803_puzzle_reply; -+struct iei_wt61p803_puzzle; -+ -+int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu, -+ unsigned char *cmd, size_t size, -+ unsigned char *reply_data, size_t *reply_size, -+ int retry_count); -+ -+int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu, -+ unsigned char *cmd, size_t size, -+ unsigned char *reply_data, size_t *reply_size); -+ -+#endif /* _MFD_IEI_WT61P803_PUZZLE_H_ */ diff --git a/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch b/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch deleted file mode 100644 index a11b387d92..0000000000 --- a/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch +++ /dev/null @@ -1,501 +0,0 @@ -From e3310a638cd310bfd93dbbc6d2732ab6aea18dd2 Mon Sep 17 00:00:00 2001 -From: Luka Kovacic <luka.kovacic () sartura ! hr> -Date: Tue, 24 Aug 2021 12:44:34 +0000 -Subject: [PATCH 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver - -Add the IEI WT61P803 PUZZLE HWMON driver, that handles the fan speed -control via PWM, reading fan speed and reading on-board temperature -sensors. - -The driver registers a HWMON device and a simple thermal cooling device to -enable in-kernel fan management. - -This driver depends on the IEI WT61P803 PUZZLE MFD driver. - -Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> -Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr> -Acked-by: Guenter Roeck <linux@roeck-us.net> -Cc: Luka Perkov <luka.perkov@sartura.hr> -Cc: Robert Marko <robert.marko@sartura.hr> ---- - drivers/hwmon/Kconfig | 8 + - drivers/hwmon/Makefile | 1 + - drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 445 ++++++++++++++++++++++ - 3 files changed, 454 insertions(+) - create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c - ---- a/drivers/hwmon/Kconfig -+++ b/drivers/hwmon/Kconfig -@@ -755,6 +755,14 @@ config SENSORS_IBMPOWERNV - This driver can also be built as a module. If so, the module - will be called ibmpowernv. - -+config SENSORS_IEI_WT61P803_PUZZLE_HWMON -+ tristate "IEI WT61P803 PUZZLE MFD HWMON Driver" -+ depends on MFD_IEI_WT61P803_PUZZLE -+ help -+ The IEI WT61P803 PUZZLE MFD HWMON Driver handles reading fan speed -+ and writing fan PWM values. It also supports reading on-board -+ temperature sensors. -+ - config SENSORS_IIO_HWMON - tristate "Hwmon driver that uses channels specified via iio maps" - depends on IIO ---- a/drivers/hwmon/Makefile -+++ b/drivers/hwmon/Makefile -@@ -87,6 +87,7 @@ obj-$(CONFIG_SENSORS_HIH6130) += hih6130 - obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o - obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o - obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o -+obj-$(CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON) += iei-wt61p803-puzzle-hwmon.o - obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o - obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o - obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o ---- /dev/null -+++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c -@@ -0,0 +1,445 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+/* IEI WT61P803 PUZZLE MCU HWMON Driver -+ * -+ * Copyright (C) 2020 Sartura Ltd. -+ * Author: Luka Kovacic <luka.kovacic@sartura.hr> -+ */ -+ -+#include <linux/err.h> -+#include <linux/hwmon.h> -+#include <linux/interrupt.h> -+#include <linux/irq.h> -+#include <linux/math64.h> -+#include <linux/mfd/iei-wt61p803-puzzle.h> -+#include <linux/mod_devicetable.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/property.h> -+#include <linux/slab.h> -+#include <linux/thermal.h> -+ -+#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM 2 -+#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL 255 -+ -+/** -+ * struct iei_wt61p803_puzzle_thermal_cooling_device - Thermal cooling device instance -+ * @mcu_hwmon: Parent driver struct pointer -+ * @tcdev: Thermal cooling device pointer -+ * @name: Thermal cooling device name -+ * @pwm_channel: Controlled PWM channel (0 or 1) -+ * @cooling_levels: Thermal cooling device cooling levels (DT) -+ * @cur_level: Current cooling level -+ * @num_levels: Number of cooling levels -+ */ -+struct iei_wt61p803_puzzle_thermal_cooling_device { -+ struct iei_wt61p803_puzzle_hwmon *mcu_hwmon; -+ struct thermal_cooling_device *tcdev; -+ char name[THERMAL_NAME_LENGTH]; -+ int pwm_channel; -+ u32 *cooling_levels; -+ int cur_level; -+ u8 num_levels; -+}; -+ -+/** -+ * struct iei_wt61p803_puzzle_hwmon - MCU HWMON Driver -+ * @mcu: MCU struct pointer -+ * @response_buffer Global MCU response buffer -+ * @thermal_cooling_dev_present: Per-channel thermal cooling device control indicator -+ * @cdev: Per-channel thermal cooling device private structure -+ */ -+struct iei_wt61p803_puzzle_hwmon { -+ struct iei_wt61p803_puzzle *mcu; -+ unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE]; -+ bool thermal_cooling_dev_present[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM]; -+ struct iei_wt61p803_puzzle_thermal_cooling_device -+ *cdev[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM]; -+ struct mutex lock; /* mutex to protect response_buffer array */ -+}; -+ -+#define raw_temp_to_milidegree_celsius(x) (((x) - 0x80) * 1000) -+static int iei_wt61p803_puzzle_read_temp_sensor(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, -+ int channel, long *value) -+{ -+ unsigned char *resp_buf = mcu_hwmon->response_buffer; -+ unsigned char temp_sensor_ntc_cmd[4] = { -+ IEI_WT61P803_PUZZLE_CMD_HEADER_START, -+ IEI_WT61P803_PUZZLE_CMD_TEMP, -+ IEI_WT61P803_PUZZLE_CMD_TEMP_ALL, -+ }; -+ size_t reply_size; -+ int ret; -+ -+ mutex_lock(&mcu_hwmon->lock); -+ ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, temp_sensor_ntc_cmd, -+ sizeof(temp_sensor_ntc_cmd), resp_buf, -+ &reply_size); -+ if (ret) -+ goto exit; -+ -+ if (reply_size != 7) { -+ ret = -EIO; -+ goto exit; -+ } -+ -+ /* Check the number of NTC values */ -+ if (resp_buf[3] != '2') { -+ ret = -EIO; -+ goto exit; -+ } -+ -+ *value = raw_temp_to_milidegree_celsius(resp_buf[4 + channel]); -+exit: -+ mutex_unlock(&mcu_hwmon->lock); -+ return ret; -+} -+ -+#define raw_fan_val_to_rpm(x, y) ((((x) << 8 | (y)) / 2) * 60) -+static int iei_wt61p803_puzzle_read_fan_speed(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, -+ int channel, long *value) -+{ -+ unsigned char *resp_buf = mcu_hwmon->response_buffer; -+ unsigned char fan_speed_cmd[4] = {}; -+ size_t reply_size; -+ int ret; -+ -+ fan_speed_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START; -+ fan_speed_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN; -+ fan_speed_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_RPM(channel); -+ -+ mutex_lock(&mcu_hwmon->lock); -+ ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, fan_speed_cmd, -+ sizeof(fan_speed_cmd), resp_buf, -+ &reply_size); -+ if (ret) -+ goto exit; -+ -+ if (reply_size != 7) { -+ ret = -EIO; -+ goto exit; -+ } -+ -+ *value = raw_fan_val_to_rpm(resp_buf[3], resp_buf[4]); -+exit: -+ mutex_unlock(&mcu_hwmon->lock); -+ return ret; -+} -+ -+static int iei_wt61p803_puzzle_write_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, -+ int channel, long pwm_set_val) -+{ -+ unsigned char *resp_buf = mcu_hwmon->response_buffer; -+ unsigned char pwm_set_cmd[6] = {}; -+ size_t reply_size; -+ int ret; -+ -+ pwm_set_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START; -+ pwm_set_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN; -+ pwm_set_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE; -+ pwm_set_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel); -+ pwm_set_cmd[4] = pwm_set_val; -+ -+ mutex_lock(&mcu_hwmon->lock); -+ ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_set_cmd, -+ sizeof(pwm_set_cmd), resp_buf, -+ &reply_size); -+ if (ret) -+ goto exit; -+ -+ if (reply_size != 3) { -+ ret = -EIO; -+ goto exit; -+ } -+ -+ if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START && -+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK && -+ resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) { -+ ret = -EIO; -+ goto exit; -+ } -+exit: -+ mutex_unlock(&mcu_hwmon->lock); -+ return ret; -+} -+ -+static int iei_wt61p803_puzzle_read_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, -+ int channel, long *value) -+{ -+ unsigned char *resp_buf = mcu_hwmon->response_buffer; -+ unsigned char pwm_get_cmd[5] = {}; -+ size_t reply_size; -+ int ret; -+ -+ pwm_get_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START; -+ pwm_get_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN; -+ pwm_get_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ; -+ pwm_get_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel); -+ -+ ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_get_cmd, -+ sizeof(pwm_get_cmd), resp_buf, -+ &reply_size); -+ if (ret) -+ return ret; -+ -+ if (reply_size != 5) -+ return -EIO; -+ -+ if (resp_buf[2] != IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ) -+ return -EIO; -+ -+ *value = resp_buf[3]; -+ -+ return 0; -+} -+ -+static int iei_wt61p803_puzzle_read(struct device *dev, enum hwmon_sensor_types type, -+ u32 attr, int channel, long *val) -+{ -+ struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent); -+ -+ switch (type) { -+ case hwmon_pwm: -+ return iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, channel, val); -+ case hwmon_fan: -+ return iei_wt61p803_puzzle_read_fan_speed(mcu_hwmon, channel, val); -+ case hwmon_temp: -+ return iei_wt61p803_puzzle_read_temp_sensor(mcu_hwmon, channel, val); -+ default: -+ return -EINVAL; -+ } -+} -+ -+static int iei_wt61p803_puzzle_write(struct device *dev, enum hwmon_sensor_types type, -+ u32 attr, int channel, long val) -+{ -+ struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent); -+ -+ return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, channel, val); -+} -+ -+static umode_t iei_wt61p803_puzzle_is_visible(const void *data, enum hwmon_sensor_types type, -+ u32 attr, int channel) -+{ -+ const struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = data; -+ -+ switch (type) { -+ case hwmon_pwm: -+ if (mcu_hwmon->thermal_cooling_dev_present[channel]) -+ return 0444; -+ if (attr == hwmon_pwm_input) -+ return 0644; -+ break; -+ case hwmon_fan: -+ if (attr == hwmon_fan_input) -+ return 0444; -+ break; -+ case hwmon_temp: -+ if (attr == hwmon_temp_input) -+ return 0444; -+ break; -+ default: -+ return 0; -+ } -+ -+ return 0; -+} -+ -+static const struct hwmon_ops iei_wt61p803_puzzle_hwmon_ops = { -+ .is_visible = iei_wt61p803_puzzle_is_visible, -+ .read = iei_wt61p803_puzzle_read, -+ .write = iei_wt61p803_puzzle_write, -+}; -+ -+static const struct hwmon_channel_info *iei_wt61p803_puzzle_info[] = { -+ HWMON_CHANNEL_INFO(pwm, -+ HWMON_PWM_INPUT, -+ HWMON_PWM_INPUT), -+ HWMON_CHANNEL_INFO(fan, -+ HWMON_F_INPUT, -+ HWMON_F_INPUT, -+ HWMON_F_INPUT, -+ HWMON_F_INPUT, -+ HWMON_F_INPUT), -+ HWMON_CHANNEL_INFO(temp, -+ HWMON_T_INPUT, -+ HWMON_T_INPUT), -+ NULL -+}; -+ -+static const struct hwmon_chip_info iei_wt61p803_puzzle_chip_info = { -+ .ops = &iei_wt61p803_puzzle_hwmon_ops, -+ .info = iei_wt61p803_puzzle_info, -+}; -+ -+static int iei_wt61p803_puzzle_get_max_state(struct thermal_cooling_device *tcdev, -+ unsigned long *state) -+{ -+ struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata; -+ -+ if (!cdev) -+ return -EINVAL; -+ -+ *state = cdev->num_levels - 1; -+ return 0; -+} -+ -+static int iei_wt61p803_puzzle_get_cur_state(struct thermal_cooling_device *tcdev, -+ unsigned long *state) -+{ -+ struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata; -+ -+ if (!cdev) -+ return -EINVAL; -+ -+ if (cdev->cur_level < 0) -+ return -EAGAIN; -+ -+ *state = cdev->cur_level; -+ return 0; -+} -+ -+static int iei_wt61p803_puzzle_set_cur_state(struct thermal_cooling_device *tcdev, -+ unsigned long state) -+{ -+ struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata; -+ u8 pwm_level; -+ -+ if (!cdev) -+ return -EINVAL; -+ -+ if (state >= cdev->num_levels) -+ return -EINVAL; -+ -+ if (state == cdev->cur_level) -+ return 0; -+ -+ cdev->cur_level = state; -+ pwm_level = cdev->cooling_levels[state]; -+ -+ return iei_wt61p803_puzzle_write_pwm_channel(cdev->mcu_hwmon, cdev->pwm_channel, pwm_level); -+} -+ -+static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = { -+ .get_max_state = iei_wt61p803_puzzle_get_max_state, -+ .get_cur_state = iei_wt61p803_puzzle_get_cur_state, -+ .set_cur_state = iei_wt61p803_puzzle_set_cur_state, -+}; -+ -+static int -+iei_wt61p803_puzzle_enable_thermal_cooling_dev(struct device *dev, -+ struct fwnode_handle *child, -+ struct iei_wt61p803_puzzle_hwmon *mcu_hwmon) -+{ -+ struct iei_wt61p803_puzzle_thermal_cooling_device *cdev; -+ u32 pwm_channel; -+ u8 num_levels; -+ int i, ret; -+ -+ ret = fwnode_property_read_u32(child, "reg", &pwm_channel); -+ if (ret) -+ return ret; -+ -+ mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true; -+ -+ num_levels = fwnode_property_count_u32(child, "cooling-levels"); -+ if (!num_levels) -+ return -EINVAL; -+ -+ cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL); -+ if (!cdev) -+ return -ENOMEM; -+ -+ cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u32), GFP_KERNEL); -+ if (!cdev->cooling_levels) -+ return -ENOMEM; -+ -+ ret = fwnode_property_read_u32_array(child, "cooling-levels", -+ cdev->cooling_levels, -+ num_levels); -+ if (ret) { -+ dev_err(dev, "Couldn't read property 'cooling-levels'\n"); -+ return ret; -+ } -+ -+ for (i = 0; i < num_levels; i++) { -+ if (cdev->cooling_levels[i] > -+ IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL) { -+ dev_err(dev, "iei_wt61p803_fan state[%d]:%d > %d\n", i, -+ cdev->cooling_levels[i], -+ IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL); -+ return -EINVAL; -+ } -+ } -+ -+ cdev->mcu_hwmon = mcu_hwmon; -+ cdev->pwm_channel = pwm_channel; -+ cdev->num_levels = num_levels; -+ cdev->cur_level = -1; -+ mcu_hwmon->cdev[pwm_channel] = cdev; -+ -+ snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel); -+ cdev->tcdev = devm_thermal_of_cooling_device_register(dev, to_of_node(child), cdev->name, -+ cdev, &iei_wt61p803_puzzle_cooling_ops); -+ if (IS_ERR(cdev->tcdev)) -+ return PTR_ERR(cdev->tcdev); -+ -+ return 0; -+} -+ -+static int iei_wt61p803_puzzle_hwmon_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent); -+ struct iei_wt61p803_puzzle_hwmon *mcu_hwmon; -+ struct fwnode_handle *child; -+ struct device *hwmon_dev; -+ int ret; -+ -+ mcu_hwmon = devm_kzalloc(dev, sizeof(*mcu_hwmon), GFP_KERNEL); -+ if (!mcu_hwmon) -+ return -ENOMEM; -+ -+ mcu_hwmon->mcu = mcu; -+ platform_set_drvdata(pdev, mcu_hwmon); -+ mutex_init(&mcu_hwmon->lock); -+ -+ hwmon_dev = devm_hwmon_device_register_with_info(dev, "iei_wt61p803_puzzle", -+ mcu_hwmon, -+ &iei_wt61p803_puzzle_chip_info, -+ NULL); -+ if (IS_ERR(hwmon_dev)) -+ return PTR_ERR(hwmon_dev); -+ -+ /* Control fans via PWM lines via Linux Kernel */ -+ if (IS_ENABLED(CONFIG_THERMAL)) { -+ device_for_each_child_node(dev, child) { -+ ret = iei_wt61p803_puzzle_enable_thermal_cooling_dev(dev, child, mcu_hwmon); -+ if (ret) { -+ dev_err(dev, "Enabling the PWM fan failed\n"); -+ fwnode_handle_put(child); -+ return ret; -+ } -+ } -+ } -+ return 0; -+} -+ -+static const struct of_device_id iei_wt61p803_puzzle_hwmon_id_table[] = { -+ { .compatible = "iei,wt61p803-puzzle-hwmon" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_hwmon_id_table); -+ -+static struct platform_driver iei_wt61p803_puzzle_hwmon_driver = { -+ .driver = { -+ .name = "iei-wt61p803-puzzle-hwmon", -+ .of_match_table = iei_wt61p803_puzzle_hwmon_id_table, -+ }, -+ .probe = iei_wt61p803_puzzle_hwmon_probe, -+}; -+ -+module_platform_driver(iei_wt61p803_puzzle_hwmon_driver); -+ -+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU HWMON Driver"); -+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch b/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch deleted file mode 100644 index 1abb1b9416..0000000000 --- a/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch +++ /dev/null @@ -1,207 +0,0 @@ -From f3b44eb69cc561cf05d00506dcec0dd9be003ed8 Mon Sep 17 00:00:00 2001 -From: Luka Kovacic <luka.kovacic () sartura ! hr> -Date: Tue, 24 Aug 2021 12:44:35 +0000 -Subject: [PATCH 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver - -Add support for the IEI WT61P803 PUZZLE LED driver. -Currently only the front panel power LED is supported, -since it is the only LED on this board wired through the -MCU. - -The LED is wired directly to the on-board MCU controller -and is toggled using an MCU command. - -Support for more LEDs is going to be added in case more -boards implement this microcontroller, as LEDs use many -different GPIOs. - -This driver depends on the IEI WT61P803 PUZZLE MFD driver. - -Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> -Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr> -Cc: Luka Perkov <luka.perkov@sartura.hr> -Cc: Robert Marko <robert.marko@sartura.hr> ---- - drivers/leds/Kconfig | 8 ++ - drivers/leds/Makefile | 1 + - drivers/leds/leds-iei-wt61p803-puzzle.c | 147 ++++++++++++++++++++++++ - 3 files changed, 156 insertions(+) - create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c - ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -300,6 +300,14 @@ config LEDS_IPAQ_MICRO - Choose this option if you want to use the notification LED on - Compaq/HP iPAQ h3100 and h3600. - -+config LEDS_IEI_WT61P803_PUZZLE -+ tristate "LED Support for the IEI WT61P803 PUZZLE MCU" -+ depends on LEDS_CLASS -+ depends on MFD_IEI_WT61P803_PUZZLE -+ help -+ This option enables support for LEDs controlled by the IEI WT61P803 -+ M801 MCU. -+ - config LEDS_HP6XX - tristate "LED Support for the HP Jornada 6xx" - depends on LEDS_CLASS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -32,6 +32,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx. - obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o - obj-$(CONFIG_LEDS_IP30) += leds-ip30.o - obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o -+obj-$(CONFIG_LEDS_IEI_WT61P803_PUZZLE) += leds-iei-wt61p803-puzzle.o - obj-$(CONFIG_LEDS_IS31FL319X) += leds-is31fl319x.o - obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o - obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o ---- /dev/null -+++ b/drivers/leds/leds-iei-wt61p803-puzzle.c -@@ -0,0 +1,147 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+/* IEI WT61P803 PUZZLE MCU LED Driver -+ * -+ * Copyright (C) 2020 Sartura Ltd. -+ * Author: Luka Kovacic <luka.kovacic@sartura.hr> -+ */ -+ -+#include <linux/leds.h> -+#include <linux/mfd/iei-wt61p803-puzzle.h> -+#include <linux/mod_devicetable.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/property.h> -+#include <linux/slab.h> -+ -+enum iei_wt61p803_puzzle_led_state { -+ IEI_LED_OFF = 0x30, -+ IEI_LED_ON = 0x31, -+ IEI_LED_BLINK_5HZ = 0x32, -+ IEI_LED_BLINK_1HZ = 0x33, -+}; -+ -+/** -+ * struct iei_wt61p803_puzzle_led - MCU LED Driver -+ * @cdev: LED classdev -+ * @mcu: MCU struct pointer -+ * @response_buffer Global MCU response buffer -+ * @lock: General mutex lock to protect simultaneous R/W access to led_power_state -+ * @led_power_state: State of the front panel power LED -+ */ -+struct iei_wt61p803_puzzle_led { -+ struct led_classdev cdev; -+ struct iei_wt61p803_puzzle *mcu; -+ unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE]; -+ struct mutex lock; /* mutex to protect led_power_state */ -+ int led_power_state; -+}; -+ -+static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led -+ (struct led_classdev *led_cdev) -+{ -+ return container_of(led_cdev, struct iei_wt61p803_puzzle_led, cdev); -+} -+ -+static int iei_wt61p803_puzzle_led_brightness_set_blocking(struct led_classdev *cdev, -+ enum led_brightness brightness) -+{ -+ struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev); -+ unsigned char *resp_buf = priv->response_buffer; -+ unsigned char led_power_cmd[5] = {}; -+ size_t reply_size; -+ int ret; -+ -+ led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START; -+ led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED; -+ led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER; -+ led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON; -+ -+ ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd, -+ sizeof(led_power_cmd), -+ resp_buf, -+ &reply_size); -+ if (ret) -+ return ret; -+ -+ if (reply_size != 3) -+ return -EIO; -+ -+ if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START && -+ resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK && -+ resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) -+ return -EIO; -+ -+ mutex_lock(&priv->lock); -+ priv->led_power_state = brightness; -+ mutex_unlock(&priv->lock); -+ -+ return 0; -+} -+ -+static enum led_brightness iei_wt61p803_puzzle_led_brightness_get(struct led_classdev *cdev) -+{ -+ struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev); -+ int led_state; -+ -+ mutex_lock(&priv->lock); -+ led_state = priv->led_power_state; -+ mutex_unlock(&priv->lock); -+ -+ return led_state; -+} -+ -+static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent); -+ struct iei_wt61p803_puzzle_led *priv; -+ struct led_init_data init_data = {}; -+ struct fwnode_handle *child; -+ int ret; -+ -+ if (device_get_child_node_count(dev) != 1) -+ return -EINVAL; -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ priv->mcu = mcu; -+ priv->led_power_state = 1; -+ mutex_init(&priv->lock); -+ dev_set_drvdata(dev, priv); -+ -+ child = device_get_next_child_node(dev, NULL); -+ init_data.fwnode = child; -+ -+ priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking; -+ priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get; -+ priv->cdev.max_brightness = 1; -+ -+ ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data); -+ if (ret) -+ dev_err(dev, "Could not register LED\n"); -+ -+ fwnode_handle_put(child); -+ return ret; -+} -+ -+static const struct of_device_id iei_wt61p803_puzzle_led_of_match[] = { -+ { .compatible = "iei,wt61p803-puzzle-leds" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_led_of_match); -+ -+static struct platform_driver iei_wt61p803_puzzle_led_driver = { -+ .driver = { -+ .name = "iei-wt61p803-puzzle-led", -+ .of_match_table = iei_wt61p803_puzzle_led_of_match, -+ }, -+ .probe = iei_wt61p803_puzzle_led_probe, -+}; -+module_platform_driver(iei_wt61p803_puzzle_led_driver); -+ -+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE front panel LED driver"); -+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:leds-iei-wt61p803-puzzle"); diff --git a/target/linux/mvebu/patches-6.1/905-Documentation-ABI-Add-iei-wt61p803-puzzle-driver-sys.patch b/target/linux/mvebu/patches-6.1/905-Documentation-ABI-Add-iei-wt61p803-puzzle-driver-sys.patch deleted file mode 100644 index b1d420ef0a..0000000000 --- a/target/linux/mvebu/patches-6.1/905-Documentation-ABI-Add-iei-wt61p803-puzzle-driver-sys.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 2fab3b4956c5b2f83c1e1abffc1df39de2933d83 Mon Sep 17 00:00:00 2001 -From: Luka Kovacic <luka.kovacic () sartura ! hr> -Date: Tue, 24 Aug 2021 12:44:36 +0000 -Subject: [PATCH 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs - interface documentation - -Add the iei-wt61p803-puzzle driver sysfs interface documentation to allow -monitoring and control of the microcontroller from user space. - -Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> -Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr> -Cc: Luka Perkov <luka.perkov@sartura.hr> -Cc: Robert Marko <robert.marko@sartura.hr> ---- - .../testing/sysfs-driver-iei-wt61p803-puzzle | 61 +++++++++++++++++++ - 1 file changed, 61 insertions(+) - create mode 100644 Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle - ---- /dev/null -+++ b/Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle -@@ -0,0 +1,61 @@ -+What: /sys/bus/serial/devices/.../mac_address_* -+Date: September 2020 -+Contact: Luka Kovacic <luka.kovacic@sartura.hr> -+Description: (RW) Internal factory assigned MAC address values -+ -+What: /sys/bus/serial/devices/.../serial_number -+Date: September 2020 -+Contact: Luka Kovacic <luka.kovacic@sartura.hr> -+Description: (RW) Internal factory assigned serial number -+ -+What: /sys/bus/serial/devices/.../version -+Date: September 2020 -+Contact: Luka Kovacic <luka.kovacic@sartura.hr> -+Description: (RO) Internal MCU firmware version -+ -+What: /sys/bus/serial/devices/.../protocol_version -+Date: September 2020 -+Contact: Luka Kovacic <luka.kovacic@sartura.hr> -+Description: (RO) Internal MCU communication protocol version -+ -+What: /sys/bus/serial/devices/.../power_loss_recovery -+Date: September 2020 -+Contact: Luka Kovacic <luka.kovacic@sartura.hr> -+Description: (RW) Host platform power loss recovery settings -+ Value mapping: 0 - Always-On, 1 - Always-Off, 2 - Always-AC, 3 - Always-WA -+ -+What: /sys/bus/serial/devices/.../bootloader_mode -+Date: September 2020 -+Contact: Luka Kovacic <luka.kovacic@sartura.hr> -+Description: (RO) Internal MCU bootloader mode status -+ Value mapping: -+ 0 - normal mode -+ 1 - bootloader mode -+ -+What: /sys/bus/serial/devices/.../power_status -+Date: September 2020 -+Contact: Luka Kovacic <luka.kovacic@sartura.hr> -+Description: (RO) Power status indicates the host platform power on method. -+ Value mapping (bitwise list): -+ 0x80 - Null -+ 0x40 - Firmware flag -+ 0x20 - Power loss detection flag (powered off) -+ 0x10 - Power loss detection flag (AC mode) -+ 0x08 - Button power on -+ 0x04 - Wake-on-LAN power on -+ 0x02 - RTC alarm power on -+ 0x01 - AC recover power on -+ -+What: /sys/bus/serial/devices/.../build_info -+Date: September 2020 -+Contact: Luka Kovacic <luka.kovacic@sartura.hr> -+Description: (RO) Internal MCU firmware build date -+ Format: yyyy/mm/dd hh:mm -+ -+What: /sys/bus/serial/devices/.../ac_recovery_status -+Date: September 2020 -+Contact: Luka Kovacic <luka.kovacic@sartura.hr> -+Description: (RO) Host platform AC recovery status value -+ Value mapping: -+ 0 - board has not been recovered from power down -+ 1 - board has been recovered from power down diff --git a/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch b/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch deleted file mode 100644 index 0f1a6f306b..0000000000 --- a/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 0aff3e5923fecc6842473ad07a688d6e2f2c2d55 Mon Sep 17 00:00:00 2001 -From: Luka Kovacic <luka.kovacic () sartura ! hr> -Date: Tue, 24 Aug 2021 12:44:37 +0000 -Subject: [PATCH 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver - documentation - -Add the iei-wt61p803-puzzle driver hwmon driver interface documentation. - -Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> -Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr> -Cc: Luka Perkov <luka.perkov@sartura.hr> -Cc: Robert Marko <robert.marko@sartura.hr> ---- - .../hwmon/iei-wt61p803-puzzle-hwmon.rst | 43 +++++++++++++++++++ - Documentation/hwmon/index.rst | 1 + - 2 files changed, 44 insertions(+) - create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst - ---- /dev/null -+++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst -@@ -0,0 +1,43 @@ -+.. SPDX-License-Identifier: GPL-2.0-only -+ -+Kernel driver iei-wt61p803-puzzle-hwmon -+======================================= -+ -+Supported chips: -+ * IEI WT61P803 PUZZLE for IEI Puzzle M801 -+ -+ Prefix: 'iei-wt61p803-puzzle-hwmon' -+ -+Author: Luka Kovacic <luka.kovacic@sartura.hr> -+ -+ -+Description -+----------- -+ -+This driver adds fan and temperature sensor reading for some IEI Puzzle -+series boards. -+ -+Sysfs attributes -+---------------- -+ -+The following attributes are supported: -+ -+- IEI WT61P803 PUZZLE for IEI Puzzle M801 -+ -+/sys files in hwmon subsystem -+----------------------------- -+ -+================= == ===================================================== -+fan[1-5]_input RO files for fan speed (in RPM) -+pwm[1-2] RW files for fan[1-2] target duty cycle (0..255) -+temp[1-2]_input RO files for temperature sensors, in millidegree Celsius -+================= == ===================================================== -+ -+/sys files in thermal subsystem -+------------------------------- -+ -+================= == ===================================================== -+cur_state RW file for current cooling state of the cooling device -+ (0..max_state) -+max_state RO file for maximum cooling state of the cooling device -+================= == ===================================================== ---- a/Documentation/hwmon/index.rst -+++ b/Documentation/hwmon/index.rst -@@ -77,6 +77,7 @@ Hardware Monitoring Kernel Drivers - ibmaem - ibm-cffps - ibmpowernv -+ iei-wt61p803-puzzle-hwmon - ina209 - ina2xx - ina238 diff --git a/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch b/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch deleted file mode 100644 index e72df378ef..0000000000 --- a/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 12479baad28d2a08c6cb9e83471057635fa1635c Mon Sep 17 00:00:00 2001 -From: Luka Kovacic <luka.kovacic () sartura ! hr> -Date: Tue, 24 Aug 2021 12:44:38 +0000 -Subject: [PATCH 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE - driver - -Add an entry for the IEI WT61P803 PUZZLE driver (MFD, HWMON, LED drivers). - -Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> -Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr> -Cc: Luka Perkov <luka.perkov@sartura.hr> -Cc: Robert Marko <robert.marko@sartura.hr> ---- - MAINTAINERS | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -9900,6 +9900,22 @@ F: include/net/nl802154.h - F: net/ieee802154/ - F: net/mac802154/ - -+IEI WT61P803 M801 MFD DRIVER -+M: Luka Kovacic <luka.kovacic@sartura.hr> -+M: Luka Perkov <luka.perkov@sartura.hr> -+M: Goran Medic <goran.medic@sartura.hr> -+L: linux-kernel@vger.kernel.org -+S: Maintained -+F: Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle -+F: Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml -+F: Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml -+F: Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml -+F: Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst -+F: drivers/hwmon/iei-wt61p803-puzzle-hwmon.c -+F: drivers/leds/leds-iei-wt61p803-puzzle.c -+F: drivers/mfd/iei-wt61p803-puzzle.c -+F: include/linux/mfd/iei-wt61p803-puzzle.h -+ - IFE PROTOCOL - M: Yotam Gigi <yotam.gi@gmail.com> - M: Jamal Hadi Salim <jhs@mojatatu.com> diff --git a/target/linux/mvebu/patches-6.1/910-drivers-leds-wt61p803-puzzle-improvements.patch b/target/linux/mvebu/patches-6.1/910-drivers-leds-wt61p803-puzzle-improvements.patch deleted file mode 100644 index 150a65498c..0000000000 --- a/target/linux/mvebu/patches-6.1/910-drivers-leds-wt61p803-puzzle-improvements.patch +++ /dev/null @@ -1,271 +0,0 @@ ---- a/drivers/leds/leds-iei-wt61p803-puzzle.c -+++ b/drivers/leds/leds-iei-wt61p803-puzzle.c -@@ -9,9 +9,13 @@ - #include <linux/mfd/iei-wt61p803-puzzle.h> - #include <linux/mod_devicetable.h> - #include <linux/module.h> -+#include <linux/of.h> - #include <linux/platform_device.h> - #include <linux/property.h> - #include <linux/slab.h> -+#include <linux/workqueue.h> -+ -+#define IEI_LEDS_MAX 4 - - enum iei_wt61p803_puzzle_led_state { - IEI_LED_OFF = 0x30, -@@ -33,7 +37,11 @@ struct iei_wt61p803_puzzle_led { - struct iei_wt61p803_puzzle *mcu; - unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE]; - struct mutex lock; /* mutex to protect led_power_state */ -+ struct work_struct work; - int led_power_state; -+ int id; -+ u8 blinking; -+ bool active_low; - }; - - static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led -@@ -51,10 +59,18 @@ static int iei_wt61p803_puzzle_led_brigh - size_t reply_size; - int ret; - -+ if (priv->blinking) { -+ if (brightness == LED_OFF) -+ priv->blinking = 0; -+ else -+ return 0; -+ } -+ - led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START; - led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED; -- led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER; -- led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON; -+ led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_SET(priv->id); -+ led_power_cmd[3] = ((brightness == LED_OFF) ^ priv->active_low) ? -+ IEI_LED_OFF : priv->blinking?priv->blinking:IEI_LED_ON; - - ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd, - sizeof(led_power_cmd), -@@ -90,39 +106,166 @@ static enum led_brightness iei_wt61p803_ - return led_state; - } - -+static void iei_wt61p803_puzzle_led_apply_blink(struct work_struct *work) -+{ -+ struct iei_wt61p803_puzzle_led *priv = container_of(work, struct iei_wt61p803_puzzle_led, work); -+ unsigned char led_blink_cmd[5] = {}; -+ unsigned char resp_buf[IEI_WT61P803_PUZZLE_BUF_SIZE]; -+ size_t reply_size; -+ -+ led_blink_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START; -+ led_blink_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED; -+ led_blink_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_SET(priv->id); -+ led_blink_cmd[3] = priv->blinking; -+ -+ iei_wt61p803_puzzle_write_command(priv->mcu, led_blink_cmd, -+ sizeof(led_blink_cmd), -+ resp_buf, -+ &reply_size); -+ -+ return; -+} -+ -+static int iei_wt61p803_puzzle_led_set_blink(struct led_classdev *cdev, -+ unsigned long *delay_on, -+ unsigned long *delay_off) -+{ -+ struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev); -+ u8 blink_mode = 0; -+ int ret = 0; -+ -+ /* set defaults */ -+ if (!*delay_on && !*delay_off) { -+ *delay_on = 500; -+ *delay_off = 500; -+ } -+ -+ /* minimum delay for soft-driven blinking is 100ms to keep load low */ -+ if (*delay_on < 100) -+ *delay_on = 100; -+ -+ if (*delay_off < 100) -+ *delay_off = 100; -+ -+ /* offload blinking to hardware, if possible */ -+ if (*delay_on != *delay_off) { -+ ret = -EINVAL; -+ } else if (*delay_on == 100) { -+ blink_mode = IEI_LED_BLINK_5HZ; -+ *delay_on = 100; -+ *delay_off = 100; -+ } else if (*delay_on <= 500) { -+ blink_mode = IEI_LED_BLINK_1HZ; -+ *delay_on = 500; -+ *delay_off = 500; -+ } else { -+ ret = -EINVAL; -+ } -+ -+ mutex_lock(&priv->lock); -+ priv->blinking = blink_mode; -+ mutex_unlock(&priv->lock); -+ -+ if (blink_mode) -+ schedule_work(&priv->work); -+ -+ return ret; -+} -+ -+ -+static int iei_wt61p803_puzzle_led_set_dt_default(struct led_classdev *cdev, -+ struct device_node *np) -+{ -+ const char *state; -+ int ret = 0; -+ -+ state = of_get_property(np, "default-state", NULL); -+ if (state) { -+ if (!strcmp(state, "on")) { -+ ret = -+ iei_wt61p803_puzzle_led_brightness_set_blocking( -+ cdev, cdev->max_brightness); -+ } else { -+ ret = iei_wt61p803_puzzle_led_brightness_set_blocking( -+ cdev, LED_OFF); -+ } -+ } -+ -+ return ret; -+} -+ - static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -+ struct device_node *np = dev_of_node(dev); -+ struct device_node *child; - struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent); - struct iei_wt61p803_puzzle_led *priv; -- struct led_init_data init_data = {}; -- struct fwnode_handle *child; - int ret; -+ u32 reg; - -- if (device_get_child_node_count(dev) != 1) -+ if (device_get_child_node_count(dev) > IEI_LEDS_MAX) - return -EINVAL; - -- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -- if (!priv) -- return -ENOMEM; -- -- priv->mcu = mcu; -- priv->led_power_state = 1; -- mutex_init(&priv->lock); -- dev_set_drvdata(dev, priv); -- -- child = device_get_next_child_node(dev, NULL); -- init_data.fwnode = child; -- -- priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking; -- priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get; -- priv->cdev.max_brightness = 1; -+ for_each_available_child_of_node(np, child) { -+ struct led_init_data init_data = {}; - -- ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data); -- if (ret) -- dev_err(dev, "Could not register LED\n"); -+ ret = of_property_read_u32(child, "reg", ®); -+ if (ret) { -+ dev_err(dev, "Failed to read led 'reg' property\n"); -+ goto put_child_node; -+ } -+ -+ if (reg > IEI_LEDS_MAX) { -+ dev_err(dev, "Invalid led reg %u\n", reg); -+ ret = -EINVAL; -+ goto put_child_node; -+ } -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) { -+ ret = -ENOMEM; -+ goto put_child_node; -+ } -+ -+ mutex_init(&priv->lock); -+ -+ dev_set_drvdata(dev, priv); -+ -+ if (of_property_read_bool(child, "active-low")) -+ priv->active_low = true; -+ -+ priv->mcu = mcu; -+ priv->id = reg; -+ priv->led_power_state = 1; -+ priv->blinking = 0; -+ init_data.fwnode = of_fwnode_handle(child); -+ -+ priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking; -+ priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get; -+ priv->cdev.blink_set = iei_wt61p803_puzzle_led_set_blink; -+ -+ priv->cdev.max_brightness = 1; -+ -+ INIT_WORK(&priv->work, iei_wt61p803_puzzle_led_apply_blink); -+ -+ ret = iei_wt61p803_puzzle_led_set_dt_default(&priv->cdev, child); -+ if (ret) { -+ dev_err(dev, "Could apply default from DT\n"); -+ goto put_child_node; -+ } -+ -+ ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data); -+ if (ret) { -+ dev_err(dev, "Could not register LED\n"); -+ goto put_child_node; -+ } -+ } -+ -+ return ret; - -- fwnode_handle_put(child); -+put_child_node: -+ of_node_put(child); - return ret; - } - ---- a/include/linux/mfd/iei-wt61p803-puzzle.h -+++ b/include/linux/mfd/iei-wt61p803-puzzle.h -@@ -36,7 +36,7 @@ - #define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */ - - #define IEI_WT61P803_PUZZLE_CMD_LED 0x52 /* R */ --#define IEI_WT61P803_PUZZLE_CMD_LED_POWER 0x31 /* 1 */ -+#define IEI_WT61P803_PUZZLE_CMD_LED_SET(n) (0x30 | (n)) - - #define IEI_WT61P803_PUZZLE_CMD_TEMP 0x54 /* T */ - #define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL 0x41 /* A */ ---- a/drivers/mfd/iei-wt61p803-puzzle.c -+++ b/drivers/mfd/iei-wt61p803-puzzle.c -@@ -176,6 +176,9 @@ static int iei_wt61p803_puzzle_recv_buf( - struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev); - int ret; - -+ print_hex_dump_debug("puzzle-mcu rx: ", DUMP_PREFIX_NONE, -+ 16, 1, data, size, false); -+ - ret = iei_wt61p803_puzzle_process_resp(mcu, data, size); - /* Return the number of processed bytes if function returns error, - * discard the remaining incoming data, since the frame this data -@@ -246,6 +249,9 @@ int iei_wt61p803_puzzle_write_command(st - - cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1); - -+ print_hex_dump_debug("puzzle-mcu tx: ", DUMP_PREFIX_NONE, -+ 16, 1, cmd, size, false); -+ - /* Initialize reply struct */ - reinit_completion(&mcu->reply->received); - mcu->reply->size = 0; diff --git a/target/linux/mvebu/patches-6.1/911-drivers-leds-wt61p803-puzzle-mcu-retry.patch b/target/linux/mvebu/patches-6.1/911-drivers-leds-wt61p803-puzzle-mcu-retry.patch deleted file mode 100644 index 2f0b1788ff..0000000000 --- a/target/linux/mvebu/patches-6.1/911-drivers-leds-wt61p803-puzzle-mcu-retry.patch +++ /dev/null @@ -1,63 +0,0 @@ ---- a/drivers/mfd/iei-wt61p803-puzzle.c -+++ b/drivers/mfd/iei-wt61p803-puzzle.c -@@ -241,6 +241,7 @@ int iei_wt61p803_puzzle_write_command(st - { - struct device *dev = &mcu->serdev->dev; - int ret; -+ int retries; - - if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH) - return -EINVAL; -@@ -252,24 +253,36 @@ int iei_wt61p803_puzzle_write_command(st - print_hex_dump_debug("puzzle-mcu tx: ", DUMP_PREFIX_NONE, - 16, 1, cmd, size, false); - -+ retries = 3; - /* Initialize reply struct */ -- reinit_completion(&mcu->reply->received); -- mcu->reply->size = 0; -- usleep_range(2000, 10000); -- serdev_device_write_flush(mcu->serdev); -- ret = serdev_device_write_buf(mcu->serdev, cmd, size); -- if (ret < 0) -- goto exit; -- -- serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT); -- ret = wait_for_completion_timeout(&mcu->reply->received, -- IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT); -- if (ret == 0) { -- dev_err(dev, "Command reply receive timeout\n"); -- ret = -ETIMEDOUT; -- goto exit; -+ while (retries) { -+ reinit_completion(&mcu->reply->received); -+ mcu->reply->size = 0; -+ usleep_range(2000, 10000); -+ serdev_device_write_flush(mcu->serdev); -+ ret = serdev_device_write_buf(mcu->serdev, cmd, size); -+ if (ret < 0) -+ goto exit; -+ -+ serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT); -+ ret = wait_for_completion_timeout(&mcu->reply->received, -+ IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT); -+ retries--; -+ if (ret == 0) { -+ if (retries == 0) { -+ dev_err(dev, "Command reply receive timeout\n"); -+ ret = -ETIMEDOUT; -+ goto exit; -+ } -+ } -+ else { -+ if (mcu->reply->data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START && -+ mcu->reply->data[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK && -+ mcu->reply->data[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK) { -+ break; -+ } -+ } - } -- - *reply_size = mcu->reply->size; - /* Copy the received data, as it will not be available after a new frame is received */ - memcpy(reply_data, mcu->reply->data, mcu->reply->size); |