diff options
Diffstat (limited to 'target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts')
-rw-r--r-- | target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts | 580 |
1 files changed, 0 insertions, 580 deletions
diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts deleted file mode 100644 index 8c775e4a4f..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts +++ /dev/null @@ -1,580 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Copyright (C) 2019 Marvell International Ltd. - * - * Device tree for the CN9132-DB board. - */ - -#include "cn9130.dtsi" -#include "puzzle-thermal.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "iEi Puzzle-M902"; - compatible = "iei,puzzle-m902", - "marvell,armada-ap807-quad", "marvell,armada-ap807"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - i2c0 = &cp1_i2c0; - i2c1 = &cp0_i2c0; - gpio1 = &cp0_gpio1; - gpio2 = &cp0_gpio2; - gpio3 = &cp1_gpio1; - gpio4 = &cp1_gpio2; - gpio5 = &cp2_gpio1; - gpio6 = &cp2_gpio2; - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - ethernet3 = &cp1_eth0; - ethernet4 = &cp1_eth1; - ethernet5 = &cp1_eth2; - ethernet6 = &cp2_eth0; - ethernet7 = &cp2_eth1; - ethernet8 = &cp2_eth2; - spi1 = &cp0_spi0; - spi2 = &cp0_spi1; - led-boot = &led_power; - led-failsafe = &led_info; - led-running = &led_power; - led-upgrade = &led_info; - }; - - memory@00000000 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - gpio_keys { - compatible = "gpio-keys"; - - reset { - label = "Reset"; - linux,code = <KEY_RESTART>; - gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>; - }; - }; - - cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { - compatible = "regulator-fixed"; - regulator-name = "cp2-xhci0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - cp2_usb3_0_phy0: cp2_usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp2_reg_usb3_vbus0>; - }; - - cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { - compatible = "regulator-fixed"; - regulator-name = "cp2-xhci1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - cp2_usb3_0_phy1: cp2_usb3_phy1 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp2_reg_usb3_vbus1>; - }; - - cp2_sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&cp2_sfpp0_i2c>; - los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; -}; - -&uart0 { - status = "okay"; -}; - -&cp0_uart0 { - status = "okay"; - - puzzle-mcu { - compatible = "iei,wt61p803-puzzle"; - #address-cells = <1>; - #size-cells = <1>; - current-speed = <115200>; - enable-beep; - status = "okay"; - - leds { - compatible = "iei,wt61p803-puzzle-leds"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - led@0 { - reg = <0>; - label = "white:network"; - active-low; - }; - - led@1 { - reg = <1>; - label = "green:cloud"; - active-low; - }; - - led_info: led@2 { - reg = <2>; - label = "orange:info"; - active-low; - }; - - led_power: led@3 { - reg = <3>; - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_YELLOW>; - active-low; - default-state = "on"; - }; - }; - - hwmon { - compatible = "iei,wt61p803-puzzle-hwmon"; - #address-cells = <1>; - #size-cells = <0>; - - chassis_fan_group0: fan-group@0 { - #cooling-cells = <2>; - reg = <0x00>; - cooling-levels = <0 159 195 211 223 241 255>; - }; - }; - }; -}; - -&ap_thermal_ic { - PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0); -}; - -&cp0_thermal_ic { - PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0); -}; - - -/* on-board eMMC - U9 */ -&ap_sdhci0 { - pinctrl-names = "default"; - bus-width = <8>; - status = "okay"; - mmc-ddr-1_8v; - mmc-hs400-1_8v; -}; - -&cp0_crypto { - status = "okay"; -}; - -&cp0_xmdio { - status = "okay"; - cp0_nbaset_phy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - }; - cp0_nbaset_phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - cp0_nbaset_phy2: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - }; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* SLM-1521-V2, CON9 */ -&cp0_eth0 { - status = "okay"; - phy-mode = "10gbase-kr"; - phys = <&cp0_comphy2 0>; - phy = <&cp0_nbaset_phy0>; -}; - -&cp0_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy4 1>; - phy = <&cp0_nbaset_phy1>; -}; - -&cp0_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy1 2>; - phy = <&cp0_nbaset_phy2>; -}; - -&cp0_gpio1 { - status = "okay"; -}; - -&cp0_gpio2 { - status = "okay"; -}; - -&cp0_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - status = "okay"; - clock-frequency = <100000>; - rtc@32 { - compatible = "epson,rx8130"; - reg = <0x32>; - wakeup-source; - }; -}; - -&cp0_i2c1 { - clock-frequency = <100000>; -}; - -/* SLM-1521-V2, CON6 */ -&cp0_sata0 { - status = "okay"; - sata-port@1 { - status = "okay"; - phys = <&cp0_comphy0 1>; - }; -}; - -&cp0_pcie2 { - status = "okay"; - num-lanes = <1>; - num-viewport = <8>; - phys = <&cp0_comphy5 2>; -}; - -/* U55 */ -&cp0_spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; - reg = <0x700680 0x50>, /* control */ - <0x2000000 0x1000000>; /* CS0 */ - status = "okay"; - spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-max-frequency = <40000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "U-Boot"; - reg = <0x0 0x1f0000>; - }; - partition@1f0000 { - label = "U-Boot ENV Factory"; - reg = <0x1f0000 0x10000>; - }; - partition@200000 { - label = "Reserved"; - reg = <0x200000 0x1f0000>; - }; - partition@3f0000 { - label = "U-Boot ENV"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -&cp0_rtc { - status = "disabled"; -}; - -&cp0_syscon0 { - cp0_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp0_i2c0_pins: cp0-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp0_i2c1_pins: cp0-i2c-pins-1 { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { - marvell,pins = "mpp0", "mpp1", "mpp2", - "mpp3", "mpp4", "mpp5", - "mpp6", "mpp7", "mpp8", - "mpp9", "mpp10", "mpp11"; - marvell,function = "ge0"; - }; - cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { - marvell,pins = "mpp44", "mpp45", "mpp46", - "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", - "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - cp0_spi0_pins: cp0-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - }; -}; - -&cp0_usb3_1 { - status = "okay"; - phys = <&cp0_comphy3 1>; - phy-names = "usb"; -}; - -/* - * Instantiate the first connected CP115 - */ - -#define CP11X_NAME cp1 -#define CP11X_BASE f4000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f4600000 -#define CP11X_PCIE1_BASE f4620000 -#define CP11X_PCIE2_BASE f4640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp1_crypto { - status = "okay"; -}; - -&cp1_xmdio { - status = "okay"; - cp1_nbaset_phy0: ethernet-phy@3 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - }; - cp1_nbaset_phy1: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - cp1_nbaset_phy2: ethernet-phy@5 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - }; -}; - -&cp1_ethernet { - status = "okay"; -}; - -/* CON50 */ -&cp1_eth0 { - status = "okay"; - phy-mode = "10gbase-kr"; - phys = <&cp1_comphy2 0>; - phy = <&cp1_nbaset_phy0>; -}; - -&cp1_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy4 1>; - phy = <&cp1_nbaset_phy1>; -}; - -&cp1_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy1 2>; - phy = <&cp1_nbaset_phy2>; -}; - -&cp1_gpio1 { - status = "okay"; -}; - -&cp1_gpio2 { - status = "okay"; -}; - -&cp1_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_i2c0_pins>; - clock-frequency = <100000>; -}; - -&cp1_rtc { - status = "disabled"; -}; - -&cp1_syscon0 { - cp1_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp1_i2c0_pins: cp1-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp1_spi0_pins: cp1-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - }; -}; - -&cp1_thermal_ic { - PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0); -}; - -/* - * Instantiate the second connected CP115 - */ - -#define CP11X_NAME cp2 -#define CP11X_BASE f6000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f6600000 -#define CP11X_PCIE1_BASE f6620000 -#define CP11X_PCIE2_BASE f6640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp2_crypto { - status = "okay"; -}; - -&cp2_ethernet { - status = "okay"; -}; - -&cp2_xmdio { - status = "okay"; - cp2_nbaset_phy0: ethernet-phy@6 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - }; - cp2_nbaset_phy1: ethernet-phy@7 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - cp2_nbaset_phy2: ethernet-phy@8 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - }; -}; - -/* SLM-1521-V2, CON9 */ -&cp2_eth0 { - status = "okay"; - phy-mode = "10gbase-kr"; - phys = <&cp2_comphy2 0>; - phy = <&cp2_nbaset_phy0>; -}; - -&cp2_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp2_comphy4 1>; - phy = <&cp2_nbaset_phy1>; -}; - -&cp2_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp2_comphy1 2>; - phy = <&cp2_nbaset_phy2>; -}; - -&cp2_gpio1 { - status = "okay"; -}; - -&cp2_gpio2 { - status = "okay"; -}; - -&cp2_i2c0 { - clock-frequency = <100000>; - /* SLM-1521-V2 - U3 */ - i2c-mux@72 { - compatible = "nxp,pca9544"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72>; - cp2_sfpp0_i2c: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - /* U12 */ - cp2_module_expander1: pca9555@21 { - compatible = "nxp,pca9555"; - pinctrl-names = "default"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x21>; - }; - }; - }; -}; - -&cp2_rtc { - status = "disabled"; -}; - -&cp2_syscon0 { - cp2_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp2_i2c0_pins: cp2-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - }; -}; - -&cp2_thermal_ic { - PUZZLE_FAN_THERMAL(cp2, &chassis_fan_group0); -}; |