diff options
Diffstat (limited to 'target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts')
-rw-r--r-- | target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts | 448 |
1 files changed, 0 insertions, 448 deletions
diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts deleted file mode 100644 index 26804a4875..0000000000 --- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * Device Tree file for Globalscale MOCHAbin - * Copyright (C) 2019 Globalscale technologies, Inc. - * Copyright (C) 2021 Sartura Ltd. - * - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include "armada-7040.dtsi" - -/ { - model = "Globalscale MOCHAbin"; - compatible = "globalscale,mochabin", "marvell,armada7040", - "marvell,armada-ap806-quad", "marvell,armada-ap806"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - ethernet3 = &swport1; - ethernet4 = &swport2; - ethernet5 = &swport3; - ethernet6 = &swport4; - }; - - /* SFP+ 10G */ - sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&cp0_i2c1>; - los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; - }; - - /* SFP 1G */ - sfp_eth2: sfp-eth2 { - compatible = "sff,sfp"; - i2c-bus = <&cp0_i2c0>; - los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; - }; -}; - -/* microUSB UART console */ -&uart0 { - status = "okay"; - - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -/* eMMC */ -&ap_sdhci0 { - status = "okay"; - - bus-width = <4>; - non-removable; - /delete-property/ marvell,xenon-phy-slow-mode; - no-1-8-v; -}; - -&cp0_pinctrl { - cp0_uart0_pins: cp0-uart0-pins { - marvell,pins = "mpp6", "mpp7"; - marvell,function = "uart0"; - }; - - cp0_spi0_pins: cp0-spi0-pins { - marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59"; - marvell,function = "spi0"; - }; - - cp0_spi1_pins: cp0-spi1-pins { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - - cp0_i2c0_pins: cp0-i2c0-pins { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - - cp0_i2c1_pins: cp0-i2c1-pins { - marvell,pins = "mpp2", "mpp3"; - marvell,function = "i2c1"; - }; - - pca9554_int_pins: pca9554-int-pins { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - cp0_rgmii1_pins: cp0-rgmii1-pins { - marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - - is31_sdb_pins: is31-sdb-pins { - marvell,pins = "mpp30"; - marvell,function = "gpio"; - }; - - cp0_pcie_reset_pins: cp0-pcie-reset-pins { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - cp0_switch_pins: cp0-switch-pins { - marvell,pins = "mpp0", "mpp1"; - marvell,function = "gpio"; - }; - - cp0_phy_pins: cp0-phy-pins { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; -}; - -/* mikroBUS UART */ -&cp0_uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_uart0_pins>; -}; - -/* mikroBUS SPI */ -&cp0_spi0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; -}; - -/* SPI-NOR */ -&cp0_spi1{ - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi1_pins>; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x3e0000>; - read-only; - }; - - partition@3e0000 { - label = "hw-info"; - reg = <0x3e0000 0x10000>; - read-only; - }; - - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -/* mikroBUS, 1G SFP and GPIO expander */ -&cp0_i2c0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - clock-frequency = <100000>; - - sfp_gpio: pca9554@39 { - compatible = "nxp,pca9554"; - pinctrl-names = "default"; - pinctrl-0 = <&pca9554_int_pins>; - reg = <0x39>; - - interrupt-parent = <&cp0_gpio1>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - gpio-controller; - #gpio-cells = <2>; - - /* - * IO0_0: SFP+_TX_FAULT - * IO0_1: SFP+_TX_DISABLE - * IO0_2: SFP+_PRSNT - * IO0_3: SFP+_LOSS - * IO0_4: SFP_TX_FAULT - * IO0_5: SFP_TX_DISABLE - * IO0_6: SFP_PRSNT - * IO0_7: SFP_LOSS - */ - }; -}; - -/* IS31FL3199, mini-PCIe and 10G SFP+ */ -&cp0_i2c1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c1_pins>; - clock-frequency = <100000>; - - leds@64 { - compatible = "issi,is31fl3199"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&is31_sdb_pins>; - shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>; - reg = <0x64>; - - led1_red: led@1 { - label = "red:led1"; - reg = <1>; - led-max-microamp = <20000>; - }; - - led1_green: led@2 { - label = "green:led1"; - reg = <2>; - }; - - led1_blue: led@3 { - label = "blue:led1"; - reg = <3>; - }; - - led2_red: led@4 { - label = "red:led2"; - reg = <4>; - }; - - led2_green: led@5 { - label = "green:led2"; - reg = <5>; - }; - - led2_blue: led@6 { - label = "blue:led2"; - reg = <6>; - }; - - led3_red: led@7 { - label = "red:led3"; - reg = <7>; - }; - - led3_green: led@8 { - label = "green:led3"; - reg = <8>; - }; - - led3_blue: led@9 { - label = "blue:led3"; - reg = <9>; - }; - }; -}; - -&cp0_mdio { - status = "okay"; - - /* 88E1512 PHY */ - eth2phy: ethernet-phy@1 { - reg = <1>; - sfp = <&sfp_eth2>; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_phy_pins>; - reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>; - }; - - /* 88E6141 Topaz switch */ - switch: switch@3 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_switch_pins>; - reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>; - - interrupt-parent = <&cp0_gpio1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - swport1: port@1 { - reg = <1>; - label = "lan0"; - phy-handle = <&swphy1>; - }; - - swport2: port@2 { - reg = <2>; - label = "lan1"; - phy-handle = <&swphy2>; - }; - - swport3: port@3 { - reg = <3>; - label = "lan2"; - phy-handle = <&swphy3>; - }; - - swport4: port@4 { - reg = <4>; - label = "lan3"; - phy-handle = <&swphy4>; - }; - - port@5 { - reg = <5>; - ethernet = <&cp0_eth1>; - phy-mode = "2500base-x"; - managed = "in-band-status"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - swphy1: swphy1@17 { - reg = <17>; - }; - - swphy2: swphy2@18 { - reg = <18>; - }; - - swphy3: swphy3@19 { - reg = <19>; - }; - - swphy4: swphy4@20 { - reg = <20>; - }; - }; - }; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* 10G SFP+ */ -&cp0_eth0 { - status = "okay"; - - phy-mode = "10gbase-r"; - phys = <&cp0_comphy4 0>; - managed = "in-band-status"; - sfp = <&sfp_eth0>; -}; - -/* Topaz switch uplink */ -&cp0_eth1 { - status = "okay"; - - phy-mode = "2500base-x"; - phys = <&cp0_comphy0 1>; - - fixed-link { - speed = <2500>; - full-duplex; - }; -}; - -/* 1G SFP or 1G RJ45 */ -&cp0_eth2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_rgmii1_pins>; - - phy = <ð2phy>; - phy-mode = "rgmii-id"; -}; - -/* SMSC USB5434B hub */ -&cp0_usb3_0 { - status = "okay"; - - phys = <&cp0_comphy1 0>; - phy-names = "cp0-usb3h0-comphy"; -}; - -/* miniPCI-E USB */ -&cp0_usb3_1 { - status = "okay"; -}; - -&cp0_sata0 { - status = "okay"; - - /* 7 + 12 SATA connector (J24) */ - sata-port@0 { - phys = <&cp0_comphy2 0>; - phy-names = "cp0-sata0-0-phy"; - }; - - /* M.2-2250 B-key (J39) */ - sata-port@1 { - phys = <&cp0_comphy3 1>; - phy-names = "cp0-sata0-1-phy"; - }; -}; - -/* miniPCI-E (J5) */ -&cp0_pcie2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_pcie_reset_pins>; - phys = <&cp0_comphy5 2>; - phy-names = "cp0-pcie2-x1-phy"; - reset-gpio = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; - ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>; -}; |